BACK/NEXT

2 Select [OK] with v, then press z.
z On the [Folder] The camera stores images in a specified folder of a Memory Stick (page 48). You can change the folder or create a new one. To create a new folder t [Create REC. Folder] (page 48) To change the folder for recording images t [Change REC. Folder] (page 49) When multiple folders are created in the Memory Stick and the first or last image in the folder is displayed, the following indicators appear. : Moves to the previous folder. : Moves to the next folder. : Moves to either the previous and next folders.

- (Protect)

Protects images against accidental erasure.

Protect (-) Exit

See the following procedure. Exits the Protection function.
To protect images in single-image mode
1 Display the image you want to protect. Using the menu 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. The image is protected and the - (protect) indicator appears on the image.

Protect Exit

4 To protect other images, select the desired image with b/B, then press z.
To protect images in index mode
1 Press (index) to display the index screen. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. 4 Select [Select] with v/V, then press z. 5 Select the image you want to protect with v/V/b/B, then press z. A green - indicator appears on the selected image. - (green)

SELECT

TO NEXT
6 Repeat step 5 to protect other images. 7 Press MENU. 8 Select [OK] with B, then press z. The - indicator turns white. The selected images are protected.
To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z.

To cancel the protection

In single-image mode Press z in step 3 or 4 of To protect images in single-image mode. In index mode 1 Select the image for which you want to remove protection in step 5 of To protect images in index mode. 2 Press z to turn the - indicator gray. 3 Repeat the operation above for all images to be unprotected. 4 Press MENU, select [OK] with B, and then press z.
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of To protect images in index mode, and press z. Select [Off] with B, then press z.

Note that formatting the Memory Stick erases all the data in the Memory Stick even if images are protected, and these images cannot be recovered. It may take some time to protect an image.
Adds a (Print order) mark to images you want to print (page 70).

(Print)

See page 67.

(Slide)

Plays back recorded images in order (Slide show).

Interval

3 sec 5 sec 10 sec 30 sec 1 min
Sets the slide show interval.
050MENU.fm Page 39 Wednesday, February 9, 2005 5:40 PM
I:\DSC-P200\2582856111\2582856121_UGuide\01GB-DSCP200\050MENU.fm master:Right

Image Folder

Plays back all images in the selected folder. Plays back all images stored on the Memory Stick.

Repeat On

Plays back images in a continuous loop. After all the images have been played back, the slide show ends. Using the menu See the following procedure. Cancels the slide show.

Start Cancel

1 Select [Interval], [Image] and [Repeat] with v/V/b/B on the control button. 2 Select [Start] with V/B, then press z. The slide show starts. To end the slide show, press z, select [Exit] with B, then press z.
During a slide show, you can display the previous/next image with b/B. The [Interval] time is just a guideline, so it may vary depending on the image size, etc.

(Resize)

You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.

7M 5M 3M 1M VGA Cancel

Cancels resizing. The setting size is just a guideline. t step 4 in Read This First
1 Display the image you want to resize. 2 Press MENU to display the menu. 3 Select [ ] (Resize) with b/B, then press z. 4 Select the desired size with v/V, then press z. The resized image is recorded in the recording folder as the newest file.
For details on [Image Size] t step 4 in Read This First You cannot change the size of movies or [Multi Burst] images. When you change from a small size to a large size, the image quality deteriorates. You cannot resize to an image size of 3:2.
When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.

(Rotate)

Rotates a still image.
Rotates an image. See the following procedure.
1 Display the image to be rotated.

5M 3M 1M VGA(E-Mail)

Approx. 3.6 Approx. 4.5 Approx. 7.2 Approx. 14.0
When you press the zoom button, the zoom scaling indicator appears as follows.
The W side of this line is the optical zoom area, and the T side is the digital zoom area Zoom scaling indicator
The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom. The AF range finder frame does not appear when using the digital zoom. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image.

Date/Time

Selects how to superimpose the date or time onto the image. Select this before shooting.
The date and time do not appear during shooting, instead, the indicator appears. The date and time appear in red on the lower-right corner of the screen during playback only.

Day&Time Date

Superimposes the date, hour, and minute. Superimposes the year, month and day.
The date is inserted in the order you select. (t step 2 Set the clock in Read This First)
Does not superimpose the date and time.
You cannot insert the date and time into movies or images in the [Multi Burst] mode. The date and time superimposed cannot be removed later.

Red Eye Reduction

Reduces the red-eye phenomenon when using the flash. Select this before shooting.

On ( Off

Reduces the red-eye phenomenon.
The flash pre-strobes twice or more before shooting.
Does not use Red Eye Reduction.
Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move. Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.

AF Illuminator

The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The ON indicator appears at this time.

Auto Off

Uses the AF illuminator. Does not use AF illuminator.
If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 3.8 m (12 feet 5 1/2 inches) (W)/2.8 m (9 feet 2 1/8 inches) (T) is recommended.) Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. When [Focus] is set (page 29), [AF Illuminator] does not function. The AF range finder frame does not appear. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. The AF illuminator does not operate when (Twilight mode), (Landscape mode) or (Fireworks mode) is selected in the Scene mode (page 27). The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image.

On Off

Use the Auto Review. Does not use Auto Review.
You cannot shoot the next image during the Auto Review display. If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.

Camera 2

Enlarges the setting indicator temporarily when you press (Macro).
Enlarges the indicators. Does not enlarge the indicators.

(Flash mode),

(Self-timer), or

Memory Stick Tool

Format
Formats the Memory Stick. Both the supplied Memory Stick and a commercially available Memory Stick are already formatted, and can be used immediately.
Note that formatting irrevocably erases all data on a Memory Stick, including even protected images.
See the following procedure. Cancels the formatting.
1 Select [OK] with v on the control button, then press z. The message All data in Memory Stick will be erased appears. 2 Select [OK] with v, then press z. The format is complete.

2 Copy the image file to the
Memory Stick folder in the following order.
1Right-click the image file, then click [Copy]. 2Double-click [Removable Disk] or [Sony MemoryStick] in [My Computer]. 3Right-click the [sssMSDCF] folder in the [DCIM] folder, then click [Paste].
sss stands for any number within the range from 100 to 999.
1 Right-click the image file, then
click [Rename]. Change the file name to DSC0ssss. Enter a number from 0001 to 9999 for ssss.
If the overwrite confirmation message appears, enter a different number in step 1. An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for movies is MPG. Do not change the extension.
Using the supplied software
This section describes the process using a Windows computer as an example.
1 Turn on your computer, and insert
the CD-ROM (supplied) into the CD-ROM drive. The installation menu screen appears.
If it does not appear, double-click (My Computer) t (PICTUREPACKAGE)
Overview of the supplied software
The supplied CD-ROM contains two software applications: PicturePackage and ImageMixer.

PicturePackage A B C D

2 Click [PicturePackage].
The Choose Setup Language screen appears.
3 Select the desired language, then
click [Next] twice. This section describes the English screen. The License Agreement screen appears. Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next].

What you can do:

A Burning Video CD The ImageMixer VCD2 screen appears. B Music Video/Slideshow Producer C Save the images on CD-R D Viewing video and pictures on PC
How to start up the functions: Click one of A-D, then click the button at the lower right of the screen.
4 Follow the instructions on the
screen to complete the installation.
ImageMixer VCD2 and DirectX will be installed if you have not yet installed them. When the restarting confirmation message appears, restart the computer following the instructions on the screen.

Installing the software

You can install the PicturePackage and ImageMixer VCD2 software using the following procedure.
If you have not yet installed the USB driver (page 55), do not connect the camera to the computer before you install the PicturePackage software (except for Windows XP). In Windows 2000/XP, log on as Administrator. When PicturePackage is installed, the USB driver is installed automatically.

5 Remove the CD-ROM as the
shortcut icons of PicturePackage Menu and PicturePackage destination Folder are displayed after the installation.

To start up the software

Double-click the PicturePackage Menu

icon on the desktop.

For information on the use of the software
Click [?] at the upper-right corner of each screen to show the on-line help. Technical support for PicturePackage/ImageMixer VCD2 is provided by the Pixela User Support Center. For more information, refer to the information included on the CD-ROM.
Using your Macintosh computer
You can copy images to your computer and create a video CD using ImageMixer VCD2 (supplied).
camera and your computer may not recover at the same time. When neither a USB connector nor a Memory Stick slot is provided on your computer, you can copy images using an additional device. See the Sony Website for details.

Recommended environment

OS (pre-installed): Mac OS 9.1, 9.2, or Mac OS X (v10.0/v10.1/v10.2/v10.3) USB connector: Provided as standard
Copying and viewing images on a computer
Recommended computer environment for using ImageMixer VCD2
OS (pre-installed): Mac OS X (v10.1.5 or later) CPU: iMac, eMac, iBook, PowerBook, PowerMac G3/G4 series Memory: 128 MB or more (256 MB or more is recommended.) Hard Disk: Disk space required for installationapproximately 250 MB Display: dots or more, 32,000 colors or more
QuickTime 4 or later must be pre-installed. (QuickTime 5 or later is recommended.)
1 Prepare the camera and a
Macintosh computer. Perform the same procedure as that described in Stage 2: Preparing the camera and the computer on page 55.
2 Connect the cable for multi-use
terminal. Perform the same procedure as that described in Stage 3: Connecting the camera and your computer on page 56.
Operations are not guaranteed for all the recommended computer environments mentioned above. If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate depending on the types of USB devices you are using. Operations are not guaranteed when using a USB hub. Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with HiSpeed USB (USB 2.0 compliant). There are two modes for a USB connection when connecting a computer, [Normal] (the default setting) and [PTP] modes. This section describes the [Normal] mode as an example. For details on [PTP], see page 51. When your computer resumes from the suspend or sleep mode, communication between your

Printing at a shop (page 70) You can take a Memory Stick containing images shot with your camera to a photo printing service shop. You can make a (Print order) mark on images that you want to print out in advance.
Printing images directly using a PictBridge compliant printer
Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer.
Stage 1: Preparing the camera
Prepare the camera to connect it to the printer with the cable for multi-use terminal.

Index button

PictBridge is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)

In single-image mode

You can print a single image on a printing sheet.

MENU button

Control Button
Use the AC Adaptor to prevent the power from turning off partway through printing.
1 Press MENU to display the menu.

In index mode

You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different images (2).
2 Press B on the control button to

select (Setup).

3 Select [
] (Setup2) with V, then select [USB Connect] with V/B.
4 Select [PictBridge] with B/v, then

press z.

An index print function may not be provided depending on the printer. The quantity of images that can be printed as an index image differ depending on the printer. You cannot print movies. If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer.

The USB mode is set.

Stage 2: Connecting the camera to the printer

Stage 3: Printing

Regardless of what the mode dial is set to, the print menu appears when you complete Stage 2.
1 Connect the multi connector on
your camera and the USB jack on the printer with the supplied cable for multi-use terminal.

To the multi connector

1 Select the desired printing
method with v/V on the control button, then press z. [All In This Folder] Prints all the images in the folder. [DPOF image] Prints all the images with a (Print order) mark (page 70) regardless of the displayed image.

To the USB jack

NTSC system

Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.

PAL system

Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.

PAL-M system

Brazil

PAL-N system

Argentina, Paraguay, Uruguay

SECAM system

Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
If you experience trouble with your camera, try the following solutions.
1 Check the items on pages 75 to 84.
If a code such as C/E:ss:ss appears on the screen, see page 85.
2 Press the RESET button using a pointed object, then turn on the power (reset).
All the settings including date and time are cleared.

RESET button

3 Consult your Sony dealer or local authorized Sony service facility.

Battery pack and power

You cannot charge the battery pack.
A battery pack cannot be charged while the camera is turned on. Turn the camera off (t step

2 in Read This First).

The battery pack cannot be installed.
Install the battery pack while pushing the battery eject lever toward the front of the camera
using the front edge of the battery pack, and release the safety tab (t step 1 in Read This First). Install the battery in the correct direction (t step 1 in Read This First).
/Charge lamp flashes when charging a battery pack.
Install the battery pack correctly (t step 1 in Read This First). The battery pack is discharged. Disconnect the AC Adaptor and reconnect it, then charge the

battery pack.

The battery pack has malfunctioned. Consult your Sony dealer or local authorized Sony

service facility.

/Charge lamp does not light up when charging a battery pack.
Properly connect the AC Adaptor. Install the battery pack correctly (t step 1 in Read This First). The battery pack is fully charged. The battery pack is discharged. Disconnect the AC Adaptor and reconnect it, then charge the

recommend that you set the write-protect switch on the Memory Stick to the LOCK position to prevent accidental erasure (page 88).
PictBridge compliant printer
A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. Check that the printer is turned on and can be connected to the camera. Set [USB Connect] to [PictBridge] in the (Setup) menu (page 51). Disconnect and connect the cable for multi-use terminal again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.

Cannot print images.

Check that the camera and the printer are properly connected using the cable for multi-use

terminal.

Turn on the printer. For further information, refer to the operating instructions supplied with
If you select [Exit] during printing, images may not print. Disconnect and connect the cable
for multi-use terminal again. If you still cannot print your images, disconnect the cable for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use terminal again. Movies cannot be printed. Images shot using cameras other than this camera or images modified with a computer may not be printed.

Printing is canceled.

You disconnected the cable for multi-use terminal before the

(Do not disconnect cable

for multi-use terminal) mark disappears.
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer

manufacturer.

---- -- -- is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 69).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
size after the printer has been connected to the camera.
The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 69) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time

On charging the battery pack
We recommend charging the battery pack in an ambient temperature of between 10C to 30C (50F to 86F). You may not be able to efficiently charge the battery pack outside of this temperature range.
Effective use of the battery pack
Battery performance decreases in low temperature surroundings. So, the time that the battery pack can be used is shorter in cold places. We recommend the following to ensure longer battery pack use: Put the battery pack in a pocket close to your body to warm it up, and insert it in your camera immediately before you start shooting. Frequently operating the zoom or flash wears out the battery charge faster. We recommend having spare battery packs handy for two or three times the expected shooting time, and making trial shots before taking the actual shots. Do not expose the battery pack to water. The battery pack is not water-resistant. Do not leave the battery pack in extremely hot places, such as in a car or under direct sunlight.

On battery life

The battery life is limited. Battery capacity decreases little by little as you use it more and more, and as time passes. If the battery operating time seems shortened considerably, a probable cause is that the battery pack has reached the end of its life. Buy a new battery pack. The battery life varies according to how it is stored and the operating conditions and environment in which each battery pack is used.
Using the Cyber-shot Station
The Cyber-shot Station (not supplied) lets you easily charge the camera. Simply set the camera in the Cyber-shot Station and charging starts automatically. While charging the battery, you can check the battery level with the CHARGE lamps of the Cyber-shot Station. The remote controller supplied with the Cyber-shot Station enables you to do the following operations from a remote location. Playing back images on a TV Recording still images and movies Interval shots In addition, when a PictBridge compliant printer is connected, images can be printed by simple remote controller operations. For more detailed information, refer to the operating instructions supplied with the Cyber-shot Station.

Precautions

x Do not leave the camera in the following places
In an extremely hot place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction. In a location subject to rocking vibration Near strong magnetic place In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

010COVIX.fm Page 95 Wednesday, February 9, 2005 5:34 PM
I:\DSC-P200\2582856111\2582856121_UGuide\01GB-DSCP200\010COVIX.fm master:Right
AC Adaptor t step 1 in Read This First AC power adaptor t step 1 in Read This First Accessories supplied t in Read This First AE/AF indicator t step 5 in Read This First AF Illuminator..46 AF lock..30 AF Mode.44 AF range finder frame..29 AF range finder frame indicator 29 Aperture.11, 24 Auto adjustment mode t step 5 in Read This First Auto Focus..10 Auto power-off function t step 2 in Read This First Auto Review..46
Cable for multi-use terminal 56, 72 Camera 1.. 44 Camera 2.. 47 Candle mode t step 5 in Read This First CD-ROM.. 55 Center AF.. 29 Center-weighted metering. 30 Change REC. Folder. 49 Charging battery pack t step 1 in Read This First Cleaning. 92 Clock Set.. 52 Cloudy.. 31 Compression ratio. 13 Computer Copying still images.. 55 Macintosh.. 64 Recommended environment. 54, 64 Software. 62 Viewing image stored on a computer with your camera.. 61 Windows.. 53 Connecting Computer.. 56 Printer.. 68 TV.. 72 Contrast.. 35 Copying still images to your computer.. 55 Create REC. Folder. 48 Cyber-shot Station. 91 Charging t step 1 in Read This First Install/Remove t step 1 in Read This First Remaining indicator t step 1 in Read This First
Date/Time..45 Daylight..31 DC IN jack t step 1 in Read This First Delete t step 6 in Read This First Digital Zoom.44 DirectX..62 Divide..40 DPOF.70
Effective pixels.93 Enlarged Icon.47 Enlarging an image t step 6 in Read This First EV...27 Exposure.24 Extension..61
F value..11 File name..60 File Number.51 File strorage destination.60 Fine..32 Fireworks mode t step 5 in Read This First Flash..31 t step 5 in Read This First Flash Level..34 Fluorescent..31 Focus.10, 29 Focus preset.29 Folder.36 Changing..49 Creating..48

Battery pack

Beach mode t step 5 in Read This First Beep..50 Blur..10 Burst..32
Date.. 45 Date&Time.. 45
Forced flash t step 5 in Read This First Format..48

Language.. 50 t step 2 in Read This First LCD Backlight. 50 LCD screen..see Screen
Number of images/Recording time. 21
One-push.. 31 Optical zoom. 44 OS.. 54, 64 Overexposure. 11
High-speed shutter mode t step 5 in Read This First Histogram..20, 28 Holding the camera t step 5 in Read This First
M AF. 44 Macintosh computer. 64 Recommended environment. 64 Macro t step 5 in Read This First Mains lead t step 1 in Read This First Manual exposure. 24 Memory Stick. 88 Format.. 48 Number of images/ recording time.. 21 Write-protect switch.. 88 Memory Stick Tool. 48 Menu. 25 Items.. 26 Shooting. 27 Viewing.. 36 Metering Mode.. 30 Mode. 32 Moisture condensation. 92 Monitor.. 44 Monochrome. 34 Multi.. 30 Multi AF.. 29 Multi Burst.. 32 Multi-pattern metering. 30 Multipoint AF.. 29
P.Effect.. 34 PAL.. 51 Parallax.. 79 PC. see Computer PFX.. 34 PictBridge..67 Picture effect..34 PicturePackage. 62 Pixel..13 Playback.see Viewing Playback/Edit.. 23 Power cord t step 1 in Read This First Precautions..92 Precision zoom. 44 Pressing halfway down.10 t step 5 in Read This First Print..66 Index mode..67 Single-image mode. 67 Print order mark. 70 Printing at a shop.70 Printing directly..67 Program auto shooting.23 Protect.. 37 PTP.. 51
Identifying parts.14 Image file storage destinations and file names..60 Image quality.13, 32 Image size..13 t step 4 in Read This First ImageMixer.62 ImageMixer VCD2..65 Incandescent..31 Index mode..67 Index screen t step 6 in Read This First InfoLITHIUM battery pack. 90 Insert/Remove t step 3 in Read This First Install.55, 62, 65 Internal rechargeable battery 92 Interval..34 ISO..11, 12, 32
Landscape mode t step 5 in Read This First
NR slow shutter.. 24 NTSC.. 51
Quick Review t step 5 in Read This First
Shooting Movie t step 5 in Read This First Still image t step 5 in Read This First Shooting menu. 27 Shooting movies. 23 Shutter speed. 11, 24 Single.. 44 Single-image mode. 67 Slide.. 38 Slow synchro t step 5 in Read This First Smart zoom. 44 Snow mode t step 5 in Read This First Soft snap mode t step 5 in Read This First Software. 62 Specifications.. 93 Spot AF.. 29 Spot metering.. 30 Spot metering cross hairs.. 30 Standard. 32
USB Driver..55 Using your camera abroad t step 1 in Read This First
REC Mode..32 Red Eye Reduction..45 Reset..74 Resize.39 Rewind/Fast forward t step 6 in Read This First Rotate.40
VGA t step 4 in Read This First Video CD.62, 65 Viewing Movie t step 6 in Read This First Still image t step 6 in Read This First Viewing menu..36 Volume t step 6 in Read This First
S AF..44 Saturation..34 Scene..27 t step 5 in Read This First SCN..27 Screen Changing the display..20 Indicator..16 LCD Backlight.50 Self-diagnosis display.85 Self-timer t step 5 in Read This First Sepia..34 Setting the clock t step 2 in Read This First Setup..35, 42, 43 Camera 1.44 Camera 2.47 Memory Stick Tool.48 Setup 1..50 Setup 2..51 Sharpness..35

Warning indicators and messages.85 WB..31 White balance..31 Windows computer..53 Recommended environment.54 Wrist strap t in Read This First Write-protect switch.88
Tripod receptacle. 14 Troubleshooting. 74 TV.. 72 Twilight mode t step 5 in Read This First Twilight portrait mode t step 5 in Read This First
Zoom t step 5 in Read This First
Underexposure. 11 USB Connect. 51

Trademarks

Corporation. Memory Stick, is a trademark of Sony , Memory Stick PRO, , Memory Stick Duo, , Memory Stick PRO , MagicGate, are trademarks of Sony
Duo, and Corporation. InfoLITHIUM is a trademark of Sony Corporation. PicturePackage is a trademark of Sony Corporation. Microsoft, Windows, Windows Media, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh, Mac OS, QuickTime, iMac, iBook, PowerBook, Power Mac, and eMac are trademarks or registered trademarks of Apple Computer, Inc. Macromedia and Flash are trademarks or registered trademarks of Macromedia, Inc. in the United States and/or other countries. Intel, MMX, and Pentium are trademarks or registered trademarks of Intel Corporation. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the or marks are not used in all cases in this manual.

Turn any Provision Inspection scope into a camera scope! Perfect for digital cameras! You can hook up video cameras, digital or film cameras with the new Provision Camera coupler. Great for warranty claims, diagnostic, evidence recording and much more. Features black anodized finish with precision machined 37mm threads and a recessed snug fit O ring for a more secure fit. The Provision Camera Coupler will work on all cameras with a threaded filter base but, you might need to purchase the step-up, or step-down rings that are easily available at any camera store or department. Part No. PVCC37

Part No. PVCC37

NOW YOU CAN
Unretouched photo taken with Camera Coupler
(Example of PVCC37 assembled with step down ring adapter)
Technical Specs: Part No. PVCC37 Material: Thread Diameter: Package Amount: Package type: Weight:
Anodized Aluminum 37mm 1 pc per/pkg Plastic box 1.5 oz
Example Camera Models With 37mm Thread:
Sonys Mavica line of Cameras

Sony MVC-CD350

Step-down adapter 52mm to 37mm (any camera shop)

Sony MVC-FD2000

Sonys Cyber-shot Point & Shoot line of Camera

Sony DSC-P93

Step-up adapter 30mm to 37mm (any camera shop) VAD-PEB adaptor (from Sony)

Sony DSC-H1

Step-down adapter58mm to 37mm (any camera shop)

Sony DSC-F828

Step-down adapter58mm to Step-down adapter58mm to 37mm 37mm (any camera shop) (any camera shop) VAD-PEB adaptor (from Sony)

Sony DSC-S90

Sony DSC-W5 Sony DSC-W7
Sony DSC-P200 Sony DSC-P200/R
Kodaks Easy Share High Zoom Series Available From:

Kodak Z760 Kodak DX7630

DX7630 or Z760 lens adapter (from Kodak)

Kodak Z740

Step down adaptor 55mm to 37mm

Kodak Z730 & DX7440

DX7740 or Z730 lens adapter (from Kodak)
Kodak Z7590,DX7590, & DX6490
DX6490, DX7590 OR Z7590 lens adapter (from Kodak)

Olympus Cameras

Olympus C-770, C-765 & C-740
Step-down adapter 55mm to 37mm (any camera shop) CLA-4 Lens adaptor (only Olympus)

Olympus C-8080

Step-down adapter 55mm to 37mm

Olympus E-300

Step-down adapter 55mm to 37mm (any camera shop)
Olympus C-5060 Olympus C-7070
Step-down adapter 40.5mm to 37mmtor

All Requires: PVCC37