BCT-D Series Digital Betacam Cassettes

The Workhorse.

Digital Betacam recording revolutionized field production by putting the beauty of digital component video onto your shoulder. Behind this milestone, which earned Sony our 20th Emmy Award, stands Sonys advanced metal tape. Thanks to Sony metal expertise, BCT-D Series cassettes accommodate the demands of digital recording with extraordinary levels of output, durability and long-term compatibility. In fact, Digital Betacam tape even exceeds analog Betacam tape in recording time!

Protecting your assets.

Advanced Metal Particles are 50% smaller and finer than those used in Sony Betacam SP tape, for 2 dB higher output. This is an essential requirement for the higher bandwidths of digital recording. Advanced calendaring renders the surface extremely smooth, an important physical attribute for high carrier-to-noise ratio. Hyper Molecular Binder for archival durability compared to Sony Betacam SP tape; denser cross-linking with 50% fewer unlinked oligomers helps the tape stand up to long durations in Pause and Still modes.
Hyper Lubricant protects the tape surface and controls the coefficient of friction, important for optimum tape-to-head contact. 75% less shrinkage than Sony Betacam SP tape for improved archival life, better machine-tomachine compatibility. Anti-static lid blocks dust, which can cause read/write errors. Overlapping case edges control dust and minimize errors.

282595_BCT-D.indd 1

11/10/08 4:17:32 PM
BCT-D tape recording times in minutes
Model Recording time (1080/59.94i) Tape Length Weight, including case Master Carton Quantity Master Carton Weight
Small cassette BCT-D6 BCT-D12 BCT-D22 BCT-D32 BCT-D40 Large cassette BCT-D34L BCT-D64L BCT-D94L BCT-D124L BCT-D12CL 34 min. 64 min. 94 min. 124 min. Cleaning Cassette 6 min. 12 min. 22 min. 32 min. 40 min.
141' (43 m) 256' (78 m) 446' (136 m) 640' (195 m) 791' (241 m) 676' (206 m) 1,253' (382 m) 1,827' (557 m) 2,402' (732 m) 305 (93 m)
0.57 lbs (260 g) 0.59 lbs (270 g) 0.61 lbs (277 g) 0.65 lbs (295 g) 0.68 lbs (308 g) 1.38 lbs (630 g) 1.49 lbs (677 g) 1.60 lbs (728 g) 1.71 lbs (780 g) 0.60 lbs (270 g)
32.4 lbs. (14.7 kg) 33.3 lbs. (15.1 kg) 35.1 lbs. (15.9 kg) 37.5 lbs. (17.0 kg) 38.8 lbs. (17.6 kg) 15.2 lbs. (6.9 kg) 16.3 lbs. (7.4 kg) 17.4 lbs. (7.9 kg) 18.3 lbs. (8.3 kg) 29.3 lbs. (13.3 kg)
* Only small cassettes fit in camcorders. Large and small cassettes fit in studio VTRs.
Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 click: sony.com/promedia
2008 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. Sony, Betacam, HDCAM and HDNA are trademarks of Sony. Printed in USA 9/08

282595_BCT-D.indd 2

11/10/08 4:17:33 PM

Broadcast and Professional Monitors

NTSC area

Sony's legendary line of broadcast monitors now has a new family of additions. The BVM-D series digital monitors are optimized for the DTV world. They support 480I, 480P, 720P and 1080I inputs directly, with no need for a scan converter. They display each input signal at its native frequency and resolution with an extremely high degree of color accuracy. And they incorporate the patented, award-winning Trinitron CRT system to deliver uncompromising quality and detail.
Multiformat Signal Support
These monitors accept the wide variety of digital signals necessary to allow you the freedom to produce in whatever format you choose: 480I, 480P, 720P or 1080I.

Sony Technology

To provide the highest possible picture quality, all BVM monitors are equipped with CRTs manufactured by Sony, using SMPTE-C standard phosphors*. New flat surface 16:9 aspect HR Trinitron CRTs have been developed exclusively for the BVM-D32E1WU and BVM-D24E1WU.
* P-22 phosphors are used in the BVM-D9H1U/D9H5U.

Functionality

This new BVM monitor series can be used in a variety of applications. Master monitors: BVM-D32E1WU/ BVM-D24E1WU/D20F1U Picture monitors: BVM-D14H1U/D14H5U/ D9H1U/D9H5U Field use: BVM-D9H1U/D9H5U

Line-up

Designed specifically to meet your diverse DTV requirements, while also supporting the interfaces, infrastructures, and archival formats you are using now.
Only Sony can provide you with the complete line-up from 32 master monitors to 9 picture and field-use monitors that you will need as you make your transition to digital. And only Sony provides the technology to enable you to continue using your current monitors next to your new digital monitors in one integrated system.
32, 24" and 20" monitors* Newly developed flat surface, 16:9 aspect HR Trinitron CRTs for the 32 and 24" master monitors Resolution of 1000 TV lines (32 and 24" in 4:3/16:9 modes) and 900/700 TV lines (20" in 4:3/16:9 modes)
BVM-D24E1WU display unit with optional BKM-10R and BKM-34H attached
14 and 9 monitors* Display unit (BVM-D14H1U/D9H1U) and stand-alone (BVM-D14H5U/ D9H5U) monitors for greater flexibility in system integration Resolution of 800/600 TV lines (14 in 4:3/16:9 modes) and 450/340 TV lines (9 in 4:3/16:9 modes)
BVM-D14H5U stand-alone monitor
9" monitors* Optional lithium-ion battery packs available for added convenience Optional Monitor ENG kit (hood and rear protector) available Audio capability, built-in speaker, and simple stand for added versatility in the field (BVM-D9H5U only)
BVM-D9H5U stand-alone monitor with optional VF-508 Monitor ENG kit
* 32, 24, 20, 14 and 9 refer to the CRT size. For viewable area, measured diagonally, please refer to the specifications.

Features

All of these monitors accept signals with a frequency range of 15.625 kHz to 45 kHz, and each picture signal is directly scanned from the original signal using the point scan method to achieve high picture quality.

Acceptable Formats

System 575/50I (PAL) 480/60I (NTSC) 575/50P 480/60P 1080/24PsF 1080/50I 1035/60I 1080/60I 720/60P Horizontal scanning frequency 15.625 15.734 31.250 31.469 27.000 28.125 33.750 33.750 45.000 Total lines per frame 750 Active lines per frame 720 Frame rate* (Hz) 60 Scanning format 2:1 Interlace 2:1 Interlace Progressive Progressive 2:1 Interlace 2:1 Interlace 2:1 Interlace 2:1 Interlace Progressive Aspect 16:9 / 4:3 16:9 / 4:3 16:9 / 4:3 16:9 / 4:3 16:9 16:9 16:9 16:9 16:9 Standard ITU 601 ITU 601 SMPTE 293M SMPTE 274M BTA S-001B SMPTE 274M / BTA S-001B SMPTE 296M
* Each of the frame rates is also compatible with 1/1.001.

System Integration

RS-485

Control Unit BKM-10R

Only the Sony BVM-D series provides you with models ranging from 9 to 32 that can be controlled in one completely integrated, multicontrol system. And, your current E, F, and G series BVM monitors and HDM series monitors can also be controlled in the same system.
Modular design with separate display and control units Parallel and RS-485 serial remote control capability Up to 32 monitors can be controlled with one control unit Optional rack mounting kits
Superb Picture Reproduction
HR Trinitron provides high resolution pictures SMPTE-C standard phosphors* Sony manufactured CRTs provide excellent color uniformity and performance Beam current feedback for stable color temperature

Auto Set-up Capabilities

Built-in auto set-up system for chroma, phase, and white balance Precise color temperature adjustment using external color probes: Sony BKM-14L, Graseby SLS 9400, Minolta CA-100, Philips PM 5639, Thoma TF6 Adjustable color temperature (factory preset to D65)

Aspect Ratio

The BVM-D32E1WU/D24E1WU, with their 16:9 CRTs, are capable of displaying both 16:9 and 4:3 formats. The other models are all equipped with 4:3 CRTs that are also capable of displaying the 16:9 formats. 16:9 and 4:3 aspect ratio masks are supplied with the 20, 14 and 9 models.
Interchangeable 16:9 and 4:3 aspect ratio masks
Flat surface, 16:9 aspect ratio HR Trinitron CRTs developed specifically for the BVM-D32E1WU and BVM-D24E1WU Optional BKM-12Y Memory Card for storage and recall of primary set-up data Safe area display, 4:3 area marker (line, translucent mat, full black mat) Data transfer between monitors using an optional BKM-12Y Memory Card or via an RS-485 link ISR (Interactive Status Reporting) for system diagnostics Built-in test signal generator for crosshatch, 100% white signal, 20% gray signal, gray scale, and PLUGE
Flat surface, 16:9 aspect ratio HR Trinitron CRT
On-screen Menus for Adjustment and Operation

Input Configuration

Depending on the optional boards installed, the settings for the type and location of the input signals can be made from the Input Configuration menu.
Matrix Interchangeability
Depending on the input signal, one of three matrices (ITU 601, ITU 709, or SMPTE 240M) can be chosen from the Matrix menu.
Beam Landing Correction (BVM-D32E1WU/D24E1WU)
The BVM-D32E1WU and BVM-D24E1WU are capable of correcting beam landing shift which may occur as a result of the terrestrial magnetic field. This correction can be made manually or automatically, with the use of the optional BKM-14L Auto Set-up Probe.
Digital Uniformity (BVM-D32E1WU/D24E1WU)
White can be reproduced uniformly on every point of the screen, even in the peripheral area, through the digital uniformity circuit. This adjustment can be made manually or automatically, with the use of the optional BKM-14L Auto Set-up Probe.

Digital Convergence (BVM-D32E1WU only)
The BVM-D32E1WU is capable of adjusting the convergence at each point of the screen, even in the peripheral area, through the digital convergence circuit. Using the onscreen menu, adjustments can be made to meet any installation.
Decoder and Expansion Boards for 32, 24 and 20 Monitors
The BVM-D32E1WU, BVM-D24E1WU and BVM-D20F1U are equipped as standard with Analog Component (Y/PB/PR, GBR) input/output connectors and four option slots in the rear panel of the monitor. Depending on the particular system requirements, the most appropriate boards can simply be inserted in the option slots in the rear panel of the monitor. A range of input decoder and expansion boards is available to provide many different input configurations. Although each decoder board has a primary function, when two or more boards are installed at the same time, they combine to accept a much wider range of signal inputs and standards.
Separate Control and Display Units
The 32, 24 and 20 monitors are designed as display units. However, an optional BKM-10R Control Unit can be easily attached to the 24 and 20 monitors with optional attachment kits.
BVM-D24E1WU with optional decorder and expansion boards
BVM-D20F1U with optional BKM-10R and BKM-32H attached
Input Decorder and Expansion Board Configurations
Signal format Serial digital input Adaptor name BKM-41HD HD SDI Input Adaptor BKM-42HD HD SDI Input Adaptor BKM-48X* HD Analog Input Expansion Adaptor BKM-20D SDI 4:2:2 Decoder Adaptor BKM-21D SDI Multi Decoder Adaptor BKM-22X SDI Input Expansion Adaptor BKM-24N NTSC Decoder Adaptor BKM-25P PAL Decoder Adaptor BKM-26M PAL-M Decoder Adaptor BKM-27T Tri-Standard Decoder Adaptor BKM-28X Analog Input Expansion Adaptor -
Component 525/625 Composite NTSC Composite PAL 575/50P 480/60P 1080/24PsF 1080/50I 1035/60I 1080/60I 720/60P Composite NTSC Analog Composite PAL input Composite PAL-M Composite SECAM Y/PB/PR 525/625 GBR 525/625 Y/C NTSC Y/C PAL Y/C PAL-M Y/PB/PR, GBR 575/50P Y/PB/PR, GBR 480/60P Y/PB/PR, GBR 1080/24PSF Y/PB/PR, GBR 1080/50I Y/PB/PR, GBR 1035/60I Y/PB/PR, GBR 1080/60I Y/PB/PR, GBR 720/60P Number of digital inputs Number of analog inputs

* Equipped with floating/non-floating ground mode selector for hum reduction.
Signal can be reproduced with this adaptor Signal can be reproduced when combined with an appropriate decoder
4:3 area marker Conventional functions, H/V delay, Underscan, Blue only, Mono are available Equipped with three color Tally (Red, Green, Amber: R + G) Mountable into a 19-inch EIA standard rack with optional mounting brackets Copy function enables INPUT CONFIG and SYSTEM CONFIG settings to be copied from other BVM-D14H/ D9H monitors connected by serial remote Simplified menus for greater ease of use
Input Boards for 14 and 9 Monitors
A new series of four input boards has been developed specifically for the 14 and 9 BVM-D series monitors. With three option slots, these monitors are able to accept a wide variety of input signals.
BVM-D14H1U with optional input boards

HD SDI Input Adaptor

xBKM-142HD
- 2 HD SDI signal inputs/1 monitor out - Acceptable HD SDI signals: 1080/24PsF, 1080/50I, 1035/60I, 1080/60I, 720/60P - Power consumption: 9 W - Dimensions: 49.7 (W) x 161.4 (H) x 121.8 (D) mm (6 3/8 x 4 7/8 inches) - Mass: Approx. 730 g (1 lb 10 oz)
* This board occupies 2 slots

SDI 4:2:2 Input Adaptor

Audio capability and built-in speaker in the bottom of the monitor (BVM-D9H5U only) Equipped with simple stand (BVM-D9H5U only) Operate on three alternative power sources: AC power (supplied adaptor), external DC 12 V, optional Lithium-ion batteries BP-L60A/L90A (BVM-D9H1U/D9H5U only)

xBKM-120D

- 2 D1 SDI signal inputs/2 active outputs with loop-through - Power consumption: 4 W - Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm (1 x 6 3/8 x 4 7/8 inches) - Mass: Approx. 310 g (11 oz)

NTSC/PAL Input Adaptor

xBKM-127W
- 2 Analog composite with loop-through BNC, Automatic 75 termination/1 Y/C with loop-through Mini DIN 4-pin, Automatic 75 termination - Power consumption: 3 W - Digital 3-lines Comb filter - Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm (1 x 6 3/8 x 4 7/8 inches) - Mass: Approx. 270 g (10 oz) Analog Component Input Adaptor

xBKM-129X

BVM-D9H5U with AC adaptor (left) and optional BP-L60A battery pack (right)

(supplied as standard with 14" and 9" monitors) - 1 Analog component (Y/PB/PR, GBR) with loop-through BNC, Automatic 75 termination/1 EXT SYNC with loop-through BNC, Automatic 75 termination - Power consumption: 0.5 W - Dimensions: 24.7 (W) x 161.4 (H) x 121.8 (D) mm (1 x 6 3/8 x 4 7/8 inches) - Mass: Approx. 250 g (9 oz)
The chart below shows the operation times of the 9 monitors when run on batteries. Times may vary depending on the picture, condition of the battery and temperature.
Inserted Input Adaptor Analog Component Full options (max) BKM-129X BKM-142HD + BKM-120D Approx. 90 min. Approx. 150 min. Approx. 60 min. Approx. 100 min.
Battery BVM-D9H1U/ BVM-D9H5U BP-L60A BP-L90A

Optional Accessories

Central Control Unit

Hand-held Control Unit

Memory Card

Auto Set-up Probe

BKM-10R

BKM-11R

BKM-12Y

BKM-14L

19 EIA Standard Rack Mount Kit for 20 monitors
19 EIA Standard Rack Mount Kit for 14 monitors
19 EIA Standard Rack Mount Kit for 14 stand-alone monitors
Control Unit Attachment Kit for BKM-10R with 20 monitor

BKM-30E20

BKM-31E14

BKM-30E14

BKM-32H
Control Unit Attachment Kit for BKM-10R with 24 monitor
Mounting Panel for EIA Standard Rack (5U) for 9 stand-alone monitors
19 Rack Mount Kit for BKM-10R
Mounting Panel for EIA Standard Rack (4U) for 9 display unit monitors

BKM-34H

MB-509

MB-510

MB-519
19 Rack Mount Kit for 9 monitors
Monitor ENG Kit (Hood and Rear Protector) for 9 monitors
9-pin Cable for RS-485/422 serial remote control
Rechargeable Lithium-ion Battery Packs for 9 monitors

MB-520

VF-508

RCC-5G/10G/30G

BP-L60A/L90A

Specifications

BVM-D32E1WU
General Signal format Type Power requirements Power consumption (with options) Dimensions
(including all protruding parts)

BVM-D24E1WU

Display unit 100 to 240 V AC 10%, 50/60 Hz
15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table)
180 W (235 W max.) 794 (W) 556.5 (H) 694 (D) 31 3/27 3/8 approx. 94 kg (206 lb 13 oz) 32-inch HR Trinitron (flat surface, 16:9 aspect) 0.320.36 mm, 90 deflection, 29.1 mm in-line gun
155 W (205 W max.) 565.5 (W) 436.8 (H) 587.3 (D) 22 3/1/1/8 approx. 51 kg (112 lb 3 oz) 24-inch HR Trinitron (flat surface, 16:9 aspect) 0.25 mm, 90 deflection, 29.1 mm in-line gun 361.6 (W) 271.2 (H), (452) 482.1 (W) 271.2 (H), (553.1) 14 1/3/4, (17 7/8) 3/4 , (21 7/8) SMPTE-C BNC 3, with loop-through 1.0 Vp-p 6 dB, positive 1.0 Vp-p 6 dB, high impedance 0.7 Vp-p 6 dB, high impedance BNC 1, with loop-through

mm inches

Mass CRT CRT type AG pitch Visual screen
(viewable area, measured diagonally)

4:3 16:9

491.3 (W) 368.5 (H), (614.1) 655.2 (W) 368.5 (H), (751.7) 19 3/5/8, (24 1/4) 25 7/5/8 , (29 5/8)
4:3 inches 16:9 Phosphor Inputs/Outputs Video GBR Y PB/PR Ext sync Composite Remote OPTION CONTROL UNIT REMOTE 1/Serial remote REMOTE 2/Parallel remote 1 Parallel remote 2 ISR Video signal performance Differential gain (DG) Differential phase (DP) Frequency response DC restoration Synchronization Retrace time Horizontal Vertical Raster and picture Normal scan performance Under scan Linearity Color temperature Convergence Preset brightness Stability of raster size Scan delay Horizontal Vertical Center resolution Operating conditions Operating temperature Storage temperature Humidity Others Supplied accessories Regulation compliance Dimensions (mm)
0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync RS-232C for BKM-11R RS-422 for BKM-10R Mini DIN 8-pin D-sub 9-pin
RS-485 serial interface, D-sub 9-pin, with loop-through D-sub 9-pin 1 (Short to ground) Not Applicable D-sub 9-pin 1 Within 5% for luminance from 0 to 70 cd/m2 Within 5 for luminance from 0 to 70 cd/m2 Within 5% for luminance from 0 to 100 cd/m2 Within 5 for luminance from 0 to 100 cd/m2
50 Hz to 30 MHz +1 dB/-3 dB Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL under 3.77 sec under 650 sec 5% over scan of the effective picture area 3% under scan of the effective picture area Less than 1.0% within circle centered on the screen Less than 0.5% within circle centered on the screen with a diameter equal to the vertical height, 2.0% at any other point* with a diameter equal to the vertical height, 1.0% at any other point* D65/D93/COL 1/COL 2 (User adjustable) Less than 0.5 mm within circle centered on the screen Less than 0.4 mm within circle centered on the screen with a diameter equal to the vertical height, 0.8 mm at any other point with a diameter equal to the vertical height, 0.7 mm at any other point 70 cd/m2 (30 fL) (when a 1.0 Vp-p 100% white signal is input) 1.0% of picture height (at 70 cd/m2 peak luminescence, 10 to 90% APL) 100 cd/m2 (30 fL) (when a 1.0 Vp-p 100% white signal is input) 1.0% of picture height (at 100 cd/m2 peak luminescence, 10 to 90% APL)
Approx. 3/8 line Approx. 1/2 field 16:TV lines, 4:TV lines 0 to 35C (32 to 95F) Optimum operating range 20 to 30C (68 to 86F) -10 to 40C (14 to 104F) 0 to 90% (no condensation) AC cable, AC plug holder, Tally label, Fuse, Operation manual UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW

794 (31 3/8)

694 (27 3/8)

565.5 (22 3/8)

436.8 (17 1/4)

556.5 (22)

587.3 (23 1/8)
* 1080/60I and 1035/60I only.

BVM-D20F1U

Display unit

BVM-D14H1U

BVM-D14H5U

Stand-alone monitor

100 to 240 V AC 10%, 50/60 Hz 150 W (210 W max.) 444 (W) 414 (H) 570 (D) 17 1/3/1/2 approx. 38 kg (83 lb 10 oz) 20-inch HR Trinitron 0.30 mm, 90 deflection, 30.6 mm in-line gun 386 (W) 291 (H), (482) 386 (W) 218 (H), (443) 15 1/1/2 , (19) 15 1/5/8 , (17 1/2) SMPTE-C BNC 3, with loop-through BNC 3, with loop-through, 75 auto terminated 1.0 Vp-p 6 dB, positive 1.0 Vp-p 6 dB, high impedance 0.7 Vp-p 6 dB, high impedance BNC 1, with loop-through RS-232C for BKM-11R RS-422 for BKM-10R D-sub 9-pin RS-485 serial interface, D-sub 9-pin, with loop-through D-sub 9-pin 1 (Short to ground) Not Applicable D-sub 9-pin 1 Within 5% for luminance from 0 to 100 cd/m2 Within 5 for luminance from 0 to 100 cd/mHz to 30 MHz +1 dB/-3 dB under 3.77 sec under 650 sec 5% over scan of the effective picture area 3% under scan of the effective picture area Less than 0.5% within circle centered on the screen with a diameter equal to the vertical height, 1.0% at any other point* Less than 1.0% within circle centered on the screen with a diameter equal to the vertical height, 2.0% at any other point D65/D93/COL 1/COL 2 (User adjustable) Less than 0.4 mm within circle centered on the screen with a diameter equal to the vertical height, 0.7 mm at any other point 100 cd/m2 (30 fL) (when a 1.0 Vp-p 100% white signal is input) 1.0% of picture height (at 100 cd/m2 peak luminescence, 10 to 90% APL) Approx. 3/8 line Approx. 1/2 field 16:TV lines, 4:TV lines 16:TV lines, 4:TV lines 0 to 35C (32 to 95F) Optimum operating range 20 to 30C (68 to 86F) -10 to 40C (14 to 104F) 0 to 90% (no condensation) 4:3 mask AC cable, AC plug holder, Tally label, Fuse, Operation manual UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW 120 cd/m2 (35 fL) (when a 1.0 Vp-p 100% white signal is input) 1.0% of picture height (at 120 cd/m2 peak luminescence, 10 to 90% APL) Approx. 1/4 line 48 Hz to 24 MHz +0 dB/-3 dB Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL Modular connector 6-pin Not Applicable BNC 1, with loop-through, 75 auto terminated 0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync Mini DIN 8-pin Not Applicable 346 (W) 280 (H) 519 (D) 13 5/1/1/2 approx. 21 kg (46 lb 3 oz) 14-inch HR Trinitron 0.25 mm, 90 deflection, 29.4 mm in-line gun 267.5 (W) 200.6 (H), (331.6) 267.5 (W) 150.5 (H), (306.9) 10 5/8 8, (13 1/8) 10 5/8 6, (12 1/8)SMPTE-C 100 W (115 W max.) 482 (W) 280 (H) 562 (D) 1/1/4 approx. 23 kg (50 lb 10 oz)

414 (16 3/8)

280 (11 1/8)

444 (17 1/2)

570 (22 1/2)

346 (13 5/8)

519 (20 1/2)

482 (19)

562 (22 1/4)

BVM-D9H1U

BVM-D9H5U

Mass CRT

CRT type AG pitch Visual screen

4:3 16:9 inches 4:3 16:9

Phosphor Inputs/Outputs Video GBR Y PB/PR Ext sync Composite OPTION CONTROL UNIT REMOTE 1/Serial remote REMOTE 2/Parallel remote 1 Parallel remote 2 ISR Differential gain (DG) Differential phase (DP) Frequency response DC restoration Retrace time Horizontal Vertical Normal scan Under scan Linearity Color temperature Convergence Remote

Video signal performance

Synchronization Raster and picture performance
Preset brightness Stability of raster size Scan delay Horizontal Vertical Center resolution Operating conditions Operating temperature Storage temperature Humidity Supplied accessories Regulation compliance

Others Dimensions (mm)

15.625 kHz to 45 kHz (For more details, please refer to the Acceptable Formats table) Display unit Stand-alone monitor 100 to 240 V AC 10%, 50/60 Hz 60 W (with OPTION: 85 W max.) 217 (W) 174 (H) 364.5 (438)*1 (D) 218 (W) 217 (H) 379.5 (453)*1 (D) 8 5/7/3/8 (17 1/4) 8 5/5/(17 7/8) approx. 8.1 kg (17 lb 13 oz), 8.9 kg (19 lb 9 oz)*2 approx. 9.3 kg (20 lb 7 oz), 10.1 kg (22 lb 4 oz)*2 9-inch HR Trinitron 0.25 mm, 70 deflection, 21.6 mm in-line gun 155.4 (W) 115 (H), (190.7) 155.4 (W) 87.4 (H), (178) 6 1/5/8 , (7 5/8) 6 1/1/2 , (7 1/8) P-22 BNC 3, with loop-through, 75 auto terminated 1.0 Vp-p 6 dB, positive 1.0 Vp-p 6 dB, high impedance 0.7 Vp-p 6 dB, high impedance BNC 1, with loop-through, 75 auto terminated 0.3 to 8.0 Vp-p, high impedance, tri-level bipolar sync RS-232C for BKM-11R Mini DIN 8-pin D-sub 9-pin (RS-485/422 switchable) Not Applicable RS-485 serial interface, D-sub 9-pin, with loop-through D-sub 9-pin 1 (Short to ground) Modular connector 6-pin Not Applicable Within 5% for luminance from 0 to 100 cd/m2 Within 5 for luminance from 0 to 100 cd/mHz to 17 MHz +0 dB/-3 dB Back porch type, back porch level: within 1% of peak luminance, 10 to 90% APL under 3.77 sec under 650 sec 5% over scan of the effective picture area 3% under scan of the effective picture area Less than 2.0% within circle centered on the screen with a diameter equal to the vertical height D65/D93/COL 1/COL 2 (User adjustable) Less than 0.4 mm within circle centered on the screen with a diameter equal to the vertical height, 0.7 mm at any other point 120 cd/m2 (35 fL) (when a 1.0 Vp-p 100% white signal is input) 1.0% of picture height (at 120 cd/m2 peak luminescence, 10 to 90% APL) Approx. 1/4 line Approx. 1/2 field 16:TV lines, 4:TV lines 0 to 35C (32 to 95F) Optimum operating range 20 to 30C (68 to 86F) -40 to 40C (14 to 104F) 0 to 90% (no condensation) 4:3 mask, AC cable, AC plug holder, AC adaptor, Tally label, Operation manual UL 1950/CSA 950 (cUL listed), FCC Class-A/IC Class-A, DHHS/DNHW

217 (8 5/8)

174 (6 7/8)
364.5 (14 3/8) 438 (17 1/4)

218 (8 5/8)

379.5 (15) 453 (17 7/8)
*1 Depth with AC adaptor *2 Mass with AC adaptor

Distributed by

2000 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. All non-metric weights and measures are approximate. Sony and Trinitron are registered trademarks of Sony Corporation.
Sony Electronics, Inc. 1 Sony Drive Park Ridge, NJ 07656

MK7317V3TC00MAR V-11109

Printed in USA (4/00)