Berlin, 05 January 2006

Six new compact DVD camcorders offer a model to suit everyone from Sony
High Picture Quality with 2M Pixel ClearVid CMOS Sensor, 3M and 1M pixel CCD with wide LCD High Audio Quality, featuring 5.1ch Audio Recording with built in Microphone Lightweight body and greater ease of use with increased stamina New visual index screen clearly explains camcorder functions and indicates the current mode of the camcorder through colour coding All models supports DVD-R/-RW/+RW Recording Compatibility & User friendly with Finalize-less operation with DVD+RW* *Minimum Recording time is necessary. HQ mode;5min/SP mode ;8min/LP mode ;10min
Sony Europe has made it even easier for consumers to find the best DVD camcorder for them with the release of six new compact additions to its DVD Handycam range for 2006. With the successful introduction of this new category; DVD Handycam, in 2005, giving easy shooting, playback and sharing with family and friends, Sony has improved and strengthened the line up with the launch of the DVD-505E, DVD-405E and DVD-404E, and DVD-304E, DVD-205E and DVD-105E models for 2006. DCR-DVD505E The new Sony DCR-DVD505E features a high resolution picture quality with the ClearVid CMOS Sensor and Enhanced Imaging Processor, ensuring better movie quality at low light. The ClearVid CMOS Sensor is able to provide wider dynamic range, smear-less images, high sensitivity, low noise, high speed processing and low power consumption. The DCR-DVD505E also offers 4 Mega pixel Still Image Recording, and Dual Rec allowing you to capture high resolution still pictures even while you are shooting movie footage, by saving them temporarily on the camcorders internal memory before they can be transferred to a Sony Memory Stick Duo or DVD. Realistic sound is achieved with the Dolby Digital 5.1ch surround sound, combined with Easy viewing via the 3.5-inch Clear photo LCD plus screen. DCR-DVD405E/404E The Sony DCR-DVD405 and 404E models feature a 3.3 Mega pixel CCD for higher resolution shooting of Movie and Still images. The models both feature Memory Stick Duo Slots to help store images produced from Still image recording. Sound is also realistically reproduced thanks to Dolby Digital 5.1ch surround sound. Both models feature Carl Zeiss Vario Sonnar T* lenses with a filter diameter of 30mm, to allow maximum light to penetrate the lens for enhanced picture quality. DCR-DVD304E The Sony DCR-DVD304E features a 1 Mega Pixel CCD for the shooting of Movie and Still images. Still images can also be recorded onto the Sony Memory Stick Duo thanks to the integral Memory Stick Duo Slot. The supplied Microphone enables true to life Dolby Digital 5.1ch surround sound recording.
DCR-DVD205E/105E The Sony DCR-DVD205E and 105E models both feature lighter and more compact bodies than the 2005 models released by Sony. Both models feature Carl Zeiss Vario Tessar lenses with a 25mm filter diameter, ensuring clear vision and beautiful shots every time. The Sony DVD205E features the ability to record and play back in 16:9 Wide screen for true to life TV viewing (DVD205E). Both camcorder models also feature DVD-R/RW/+RW Recording compatibility. New Features The latest models from Sony also include a visual index with picture icons explaining the nature of particular camera modes. All the models feature the STAMINA technology you have come to expect from Sony, meaning you should never miss that special moment. When youve finished recording, its easy to copy the contents 8cm DVD to 12cm DVD using the supplied software Nero Express 6. A new Play/Edit Button on the body of the camcorder allows you to alternate between Still and Movie modes and view footage immediately. In addition to enhanced movie modes, the new DVD camcorder range also features an improved DSC (digital still camera) function, including 16:9 wide Still Image Recording and PictBridge compatibility. The new DVD Handycam line up from Sony will be available throughout Europe from February 2006. Optional accessories Sony provides a wide variety of accessories to maximise the Handycam shooting experience and address the diverse needs of all customers. All potential requirements are covered, from lenses to microphones, from lights to high-power batteries and from tripods to stylish carrying cases. New additions to the camcorder accessory line from Sony in 2006 include: The exciting ECM-HW1 wireless microphone, using bluetooth technology, is designed to add further depth and clarity to your audio recording by being easily attached to your subject by clipping onto the clothes, worn around the arm, around the neck or placed nearby. The microphone communicates with the receiver unit wirelessly at up to 30M distance. With DVD505, 405, or 404 models, this microphone works as a centre microphone of 5.1ch surround sound. This microphone may not be available in some countries due to the wireless technology regulations. The ACC-FP71 value accessory kit contains three indispensable items to accompany your camcorder, offering a saving of more than 25 per cent on the price of buying them separately. The kit contains the NP-FP71 high capacity battery, the LCS-VAC carrying case and shoulder belt.

Sony also offers LCM-HCF, a new Semi Soft Carrying Case for easy storage and carrying of your Handycam this is available for DVD505, 405 and 404. For DVD305, 304, 205 and 105, LCM-HCG a carrying case for the entry-level DVD models is available. Also Sony range the SPK-HCB Sports Pack. This is compatible with new Handycam models, and offers waterproofing up to 5metres. The HVL-10NH is a high power 10w light. Compatible with all new Handycam models, it is supplied with an Accessory Shoe Adaptor.
- ENDS NOTES FOR EDITORS About ClearVid CMOS Sensor The newly-developed ClearVid CMOS Sensor and Enhanced Imaging Processor are developed by Sony. In combination with the newly-developed ClearVid CMOS Sensor, and the Enhanced Imaging Processor, DCR-DVD505/E 905/E is able to provide wider dynamic range, smear-less images, high sensitivity, low noise, high speed processing and low power consumption. In addition, this model employs variable bit rate (VBR), which is the recording format to adjust the bit rate automatically according to the scene being recorded. Thanks to this feature image noise are reduced.
For further information, please contact: Jean-Baptiste Duprieu, Sony Europe Tel: 817 349/ email: jean-baptiste.duprieu@eu.sony.com Maria Heavey, Sony Europe Tel: / email: maria.heavey@eu.sony.com
In addition, for any queries about Sony in your respective country, please contact your local Sony PR office. About Sony: Sony manufactures audio, video, communications and information technology products for the global consumer and professional markets. With its music, pictures, game and online businesses, Sony is uniquely positioned to be one of the Worlds Leading Consumer Brands. Sony recorded consolidated annual sales of EUR 53.43 billion (yen 7,160 billion) for the fiscal year ended March 31, 2005 and it employs approximately 151,400 people worldwide. In Europe, Sony recorded consolidated annual sales of EUR 12.03 billion (yen 1,613 billion) for the fiscal year ended March 31, 2005, based on an average market exchange rate for the same period of yen 134 to the EUR. Sony Europe, headquartered at the Sony Center am Potsdamer Platz in Berlin, is responsible for the company's European electronics business and registered consolidated sales of EUR 8.87 billion for the fiscal year ended March 31, 2005. For more information on Sony Europe, please visit
http://www.sony-europe.com and
http://www.sony-europe.com/presscenter

2-661-360-11(1)

Enjoying with your DVD Handycam Getting Started
Easy Handycam 32 Recording /Playback 40
Playback on DVD devices 94

Operating Guide

DCR-DVD105E/DVD205E/DVD304E/ DVD305E/DVD605E/DVD705E/ DVD755E
Using the Recorded disc Using the Setup items Editing on DVD Handycam Dubbing, Printing
Using a Computer 101 Troubleshooting 107 Additional Information 130 Glossary, Index 144

2006 Sony Corporation

Read this first
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
For the customers in Europe

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture. CAUTION
The use of optical instruments with this product will increase eye hazard. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Replace the battery with the specified type only. Otherwise, fire or injury may result.

ATTENTION

The electromagnetic fields at the specific frequencies may influence the picture and sound of this camcorder. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters. (9.8 feet)
FOR CUSTOMERS IN THE UNITED KINGDOM
NOTICE ON THE SUPPLIED AC ADAPTOR
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362 (i.e., marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable Accessories: Remote Commander, Microphone (For DCRDVD304E/DVD305E/DVD755E)
For customers in the U.S.A.
If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for the FCC related matters only.

Regulatory Information

Declaration of Conformity
Trade Name: SONY Model No.: DCR-DVD755E Responsible Party:Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

Choosing a disc

Your DVD Handycam is compatible with 8cm DVD-R, DVD-RW and DVD+RW. It does not support 12cm discs.
Recording format for DVD-RW
When you use a DVD-RW, you can choose the recording format from VIDEO mode or VR mode. In this manual, VIDEO mode is indicated as and VR mode as.
A recording format that is compatible with most DVD devices, especially after finalizing. In VIDEO mode, only the most recent image can be erased. A recording format that enables editing with your DVD Handycam (deleting and rearranging the order of images). A finalized disc can be played back in DVD devices that support VR mode*1.
Disc and recording formats Glossary (p.144,145)

Disc format features

Disc types and symbols
Figures in parentheses ( ) indicate page numbers.

DVD-R DVD-RW DVD+RW

Symbols used in this manual Both 16:9 (wide) and 4:3 movie can be recorded on the same disc*2 Deleting the last recording immediately Deleting recordings freely Editing recordings on your camcorder Using a disc repeatedly even if the disc becomes full by formatting*3 Playing back recordings on other DVD devices if you finalize the disc
(30) (48) (88) (88) (62) (38, 54)

z z z

z z z z z

z z z z z

z z z
Playing back recordings on other DVD (54) devices even if you do not finalize the disc Creating the DVD menu when you finalize the disc
*1Refer to the instruction manual of your DVD device to see whether it supports the VR mode of DVD-RW. *2For still images, you can record them on the all types of discs. *3 Formatting deletes all recordings and returns the recording medium to its original empty state. (p.62) Even when using a new disc, format it with your DVD Handycam (p.27). *4 Do not use a DVD+RW before finalizing in a computer as this may result in a malfunction.

Recording time

Recording time per disc side The minimum recording time is given in parentheses. unit: min.
Recording mode HQ (High Quality) SP (Standard Play) LP (Long Play) Recording time approx. 20 (18) approx. 30 (18) approx. 60 (44)
Your DVD Handycam uses the VBR (Variable Bit Rate) format to automatically adjust image quality to suit the recording scene. This technology causes fluctuations in the recording time of a disc. Movie containing quickly moving and complex images is recorded at a higher bit rate and this reduces the overall recording time. VBR Glossary (p.145)
The recording time for the movie drops when the disc also contains still images.

Disc use

For reliability durability of recording /playback, we recommend that you use Sony discs or discs with an *(for VIDEO CAMERA) mark for your DVD Handycam.

Recordings cannot be added even if there is free space left. Unfinalizing allows you to add recordings (p.61).
The disc can be played back in a device compatible with the DVD-RW VR mode.
Recordings can be added without unfinalizing.
The disc can be played back without finalizing. But finalizing is required in some cases. For details, see page 54.

Playback compatibility

Playback compatibility with any DVD device is not guaranteed. Refer to the instruction manual supplied with your DVD device or consult your dealer.
Step 1: Checking supplied items
Make sure that you have following items supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. Discs and Memory Stick Duo are not supplied.
AC Adaptor (1) (p.19) Cleaning cloth (1) Shoe cover (1)(p.100) (For DCR-DVD304E/DVD305E/DVD755E) Rechargeable battery pack NP-FP50 (1) (p.20)
Attached to the camcorder.
Lens cap (1) (p.23) Mains lead (1) (p.19) Surround microphone ECM-L100 (1) (p.44) (For DCR-DVD304E/DVD305E/DVD755E)
A/V connecting cable (1) (p.52, 94, 96, 100)
USB cable (1) (p.98, 100) (For DCR-DVD305E/DVD755E)
CD-ROM Picture Package Ver.1.8.1 (1) (p.101) (For DCR-DVD304E/DVD305E/ DVD755E) CD-ROM Nero Express 6 (1) (p.101) (For DCR-DVD105E/DVD205E/ DVD304E/DVD605E/DVD705E)
Use when copying a disc recorded with your camcorder onto a 12cm DVD.
Wireless Remote Commander (1) (p.51) (For DCR-DVD304E/DVD305E/DVD755E) Operating Guide (This manual) (1)

To attach the lens cap

Thread the string of the lens cap (supplied) through the metal fittings of the grip belt.
A button-type lithium battery is already installed.
Step 2: Charging the battery pack
You can charge the battery after attaching the InfoLITHIUM battery pack (P series) (p.135) to your camcorder.
You cannot use an NP-FP30 battery pack with your camcorder. (See the reverse side of the battery pack for the model number.) Installing the battery pack with excess force may lead to camcorder malfunction such as deterioration in battery pack performance or difficulty in removing the battery pack.
2 Slide the POWER switch in the
direction of the arrow to set it to OFF (CHG) (The default setting). Getting Started
CHG lamp POWER switch DC IN jack cover DC plug Battery DC IN jack Mains lead To the wall socket AC Adaptor Match the v mark on the DC plug with v mark on your camcorder.
3 Connect the AC Adaptor to the DC
IN jack on your camcorder. Open the DC IN jack cover to connect the AC Adaptor.

DC IN jack cover

1 Slide the battery pack in the
direction of the arrow until it clicks.

During Easy Handycam operation (p.32), [Format the disc? If not, remove the disc.] appears. Touch , then proceed to step 8.
6 Select the aspect ratio of the
recording picture ([16:9 WIDE] or [4:3]) for DVD+RW, then touch.

FORMAT : 16:9 WIDE

Select aspect ratio of movie to be recorded. Format again to change. 16:9 WIDE 4:3 OK
x16:9 WIDE You can record wide-angle highresolution pictures. If you intend to view pictures on a wide TV, selecting [16:9 WIDE] is recommended. x4:3 You can record to play back pictures on a 4:3 TV.
7 Touch [YES] t [YES]. 8 Touch
appears. When the formatting is completed, you can start recording on the DVD-RW/ DVD+RW.
Do not remove the battery pack or disconnect the AC Adaptor while formatting.
5 Select the recording format for a
DVD-RW, and touch proceed to step 7.

FORMAT : VIDEO

when [Completed.]
Can playback on various DVD devices. Cannot edit in Camcorder VIDEO VR OK
xVIDEO mode You can play back the disc on most of DVD devices if you finalize it. xVR mode You can edit, delete pictures, or divide movies on your camcorder (p.88). However, the disc can be played back only on DVD devices that support VR mode when you finalize it.

To remove the disc

Perform step 1 and 2 to open the disc cover, then remove the disc.
Do not apply shock or vibration to your camcorder while the ACCESS lamp lights up or flashes, or [DISC ACCESS] or [PREPARING TO OPEN] is displayed on the LCD screen. It may take some time to remove the disc depending on the disc condition or recorded materials. It may take up to 10 minutes to remove a disc if it is damaged or is dirty with fingerprints, etc. In that case, the disc might be damaged.
After your camcorder recognizes the disc, disc information such as the date you started to use it and information on previously recorded areas appears for about 8 seconds. The information on previously recorded areas may not be displayed correctly depending on the condition of the disc. To delete all of the previously recorded pictures from a DVD-RW/DVD+RW, then to use it again to record new pictures, see Deleting all of the scenes on the disc (Formatting) on page 62.
If you force the Memory Stick Duo into the slot in the wrong direction, the Memory Stick Duo slot, or image data may be damaged.

When playback of the selected movie reaches the end, the screen returns to the VISUAL INDEX screen. Touch / during pause to play back movie slowly. When you touch a movie marked with i, you can play it back from the point you have stopped previously. Touch [SETUP] t [VOLUME], then adjust the volume with /.

Still Images

Disc: Touch tab and the still image to be played back.
Slide show button (p.47) Recording date/time Go to the VISUAL INDEX screen Previous/Next

Media type

Memory Stick Duo (For DCR-DVD304E/DVD305E/DVD755E): Touch tab and the still image to be played back.
Slide show button (p.47) Recording date/time Go to the VISUAL INDEX screen Previous/Next Touch to play back a series of still images (p.47).
When you playback during Easy Handycam operation, you cannot use following functions: Playback zoom (p.46) Turning off the backlight of the LCD screen (For DCR-DVD205E/DVD304E/DVD305E/DVD705E/ DVD755E) (p.24)
Preparation for playing back on a DVD player (Finalizing)
Finalizing makes the recorded DVD compatible for playback with DVD devices and DVD drives of computers. With Easy Handycam operation, your DVD Handycam sets up the following options automatically. Therefore, you can finalize a disc easily.
creating a DVD menu to display images as thumbnails on a DVD player, etc. creating a Photomovie to play back still images on a DVD player, etc.

DVD menu, Photomovie

Glossary (p.144, 145)
A DVD-R cannot be overwritten once you finalize it even when there is space to be recorded. If you finalize a DVD-RW (VIDEO mode)/DVD+RW, you cannot record additional material on the disc during Easy Handycam operation. Cancel Easy Handycam operation, then follow the steps shown on page 61.
Preparation for finalizing a disc
1 Place your camcorder in a stable position. Connect the AC Adaptor to the
DC IN jack on your camcorder.

AC Adaptor

DC IN jack To the wall socket
Be sure to use the AC adaptor to prevent your camcorder from running out of power during finalizing.
2 Turn on your camcorder and press EASY to set to Easy Handycam (p.32).
[Easy Handycam operation ON.] and appears on the screen.
3 Insert the disc to be finalized.
Finalizing a disc Touch the LCD screen in the following steps. 3
Do not apply shock or vibration to your camcorder, and do not disconnect the AC adaptor during finalizing. The shorter the amount of material recorded, the longer it takes for finalizing.

Completed a disc

Remove the disc from your camcorder. Enjoy watching images on the DVD device or DVD drive, etc. Refer also to the instruction manuals supplied with the DVD device, etc.

3 Start playing back.

Touch tab and the movie to be played back.
Beginning of the scene/ Toggles Play or previous scene Pause as you touch

Next scene

Stop (go to the Reverse/ VISUAL INDEX screen) Forward When playback of the selected movie reaches the end, the screen returns to the VISUAL INDEX screen. Touch / during pause to play back movie slowly. One touch makes the reverse/fast forward approximately 5 times faster, two touches makes it approximately 10 times* faster. * Approximately 8 times faster using a DVD+RW When you touch a movie marked with i, you can play it back from the point you have stopped previously. Go to the Previous/ VISUAL Next INDEX screen

Slide show button (p.47)

Memory Stick Duo (For DCRDVD304E/DVD305E/DVD755E) : Touch tab and the still image to be played back.
Slide show button (p.47) Go to the VISUAL INDEX screen Previous/ Next

To adjust the volume

Touch with / t [VOLUME], then adjust it.

, touch

To playback the disc on other DVD devices

See page 54.

If you cannot find [VOLUME ] in [SETUP] (p.64).
Functions used for recording/playback, etc.

To use zoom.. 15

Move the power zoom lever 1 slightly for a slower zoom. Move it further for a faster zoom.
Wider range of view: (Wide) DCR-DVD304E/DVD305E/ DVD755E:

Close view: (Telephoto)

Be careful not to remove your finger suddenly from the power zoom lever 1 If you do so, the sound of the lever moving may be recorded. You cannot change the zoom speed with the zoom buttons 5 on the LCD frame. The minimum distance required between your camcorder and the subject to get a sharp focus is about 1 cm (about 1/2 inch) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto. You can set [DIGITAL ZOOM] (p.72) if you want to zoom to a level greater than the following:

DCR-DVD205E/DVD705E:

(optical zoom) DCR-DVD105E/DVD605E DCR-DVD205E/DVD304E/ DVD305E/DVD705E/ DVD755E DCR-DVD105E/DVD605E:
To record sound with more presence (5.1ch surround recording) (For DCRDVD304E/DVD305E/DVD755E).. 2
Your camcorder has Dolby Digital 5.1 Creator installed for recording 5.1ch surround sound. Enjoy realistic sound when playing the disc on devices that support 5.1ch surround sound.
When recording in 5.1ch surround sound, attach the supplied surround microphone to your camcorder. Without a surround microphone, your camcorder records in 2ch sound.

* As the number of still images recorded in Memory Stick Duo increases, new folders are automatically created to store them.

Viewing movies

Viewing still images
qg Playback mode qh Previous/Next button (36, 43) qj Scene number qk Video operation buttons (36, 43)
ql Number of played back still images /Total number of recorded still images w; Play back folder (only for Memory Stick Duo)(For DCR-DVD304E/DVD305E/ DVD755E) wa Data file name ws VISUAL INDEX button (37, 43) wd Slide show button (47) wf Previous/Next button (37, 43)
Indicators displayed during recording/playback (continued)

( ) is a reference page.

Indicators on the LCD screen and viewfinder
When you can change the setup items, or during recording or playback, following indicators displayed.
Upper left Upper Center Upper right

Center

Indicator Meaning
NightShot plus (45) Super NightShot plus (71) Color Slow Shutter (71) PictBridge connecting (98) Warning (125)

Bottom

Indicator Bottom Center Meaning
Picture effect (76) Digital effect (76) Manual focus (70) PROGRAM AE (68)

Upper left

5.1ch surround recording/ playback (44) Self-timer recording (71) Continuous photo recording /Bracket recording (73) Flash light (70) MICREF LEVEL low (79) LCD panel off (76)
Backlight (45) White balance (69) WIDE SELECT (30,72) SteadyShot off (73) Flexible spot meter (68)/ Exposure (69)
DATA CODE while recording
The recording date and time is recorded automatically on the disc and Memory Stick Duo (DCR-DVD304E/DVD305E/ DVD755E). They are not displayed while recording. However, you can check them as [DATA CODE] during playback (p.80). You can view the recording date and time on a DVD device, etc. (p.58, [SUB-T DATE], p.82).

Upper center

Repeat of Slide show (47)

Upper right

Fader (75) LCD backlight off (24)
Remote Commander (DCR-DVD304E/DVD305E/DVD755E)
Remove the insulation sheet before using the Remote Commander.

Insulation sheet

1 DATA CODE (p.80)
Displays the date and time or camera setting data of the recorded images (p.80) when you press this while playing back.

2 PHOTO (p.35, 40)

The on-screen image when you press this button will be recorded as a still image.

xDVD+RW Select the aspect ratio of the recording picture, then format the disc. Proceed to step 6.

DVD-RW, touch to step 7.

FORMAT :

,then proceed

3 Insert the disc to be formatted into
4 For DCR-DVD105E/DVD205E/
DVD605E/DVD705E: Touch t [FORMAT]. For DCR-DVD304E/DVD305E/ DVD755E: Touch t[ FORMAT]. xDVD-RW Select the recording format, then format the disc. Proceed to step 5.
For details on a recording format, see page 14.
6 Select the aspect ratio ([16:9 WIDE]
or [4:3]) of the recording picture for DVD+RW, then touch.
For details on the movie aspect ratio, see page 28.
7 Touch [YES] t [YES], then touch
You cannot change the movie aspect ratio which you set in step 6 for the DVD+RW. Format the disc again to change the aspect ratio. During the Easy Handycam operation (p.32), the screen in step 5 does not appear even if you insert a DVD-RW in your camcorder. Proceed to step 7. You cannot format a disc that has been protected on other devices. Cancel the protection with the original devices, and then format it.
1 Slide the POWER switch in the direction of the arrow to light up the respective
Slide the POWER switch while pressing the green button in the center only when the POWER switch is in the OFF (CHG) position.
: Settings for movies : Settings for still images When carrying out the playback settings, press PLAY/EDIT to go to the playback screen.
2 Touch the LCD screen to select the setup item.
Unavailable items will be grayed out.
x To use the short-cuts of Personal Menu
On Personal Menu, short-cuts for frequently used setup items are added.
You can customize Personal Menu as you like (p.83).
2 Touch the desired setup item. If the desired setup item is not displayed on the screen, touch 3 Select the desired setting, then touch.

until it is displayed.

x To change the setup items
You can customize setup items that are not added to Personal Menu.

0:00:00 VIDEO

1 Touch t[SETUP]. 2 Select the desired setup item. Touch / to select the item, then touch in step 2.) 3 Select the desired item.
You can also touch the item directly to select it.
. (The process in step 3 is the same as that
4 Customize the item. After finishing the settings, touch t (close) to hide the setup screen. If you decide not to change the setting, touch to return to the previous screen.
x To change the setup items during Easy Handycam operation
does not appear during Easy Handycam operation (p.32).
1 Touch [SETUP]. Available setup items appear. 2 Select the desired item. 3 Customize the item. Touch after finishing the setting. Touch not to change the item without changing the setting.
Cancel the Easy Handycam operation (p.32) to change the setup items for the standard operation.

Do not remove the battery pack or the AC Adaptor from your camcorder while editing the Playlist. It may damage the disc. You can add up to 999 scenes in the Playlist.
Adjusts the dividing point with more precision after the dividing point has been selected with.
Play and pause toggles as you press. A slight difference may occur from the point where you touch and the actual dividing point, as your camcorder selects the dividing point based on half-second increments.
tab or tab that includes the scene you want to add to the Playlist, then touch [EDIT]. Editing on DVD Handycam
Once you divide a movie, you cannot return it to the state it was in before you divided it.
If the movie is added in the Playlist, dividing the original movie does not affect the movie in the Playlist.

3 Touch [

ADD] when
Touch / to display [ [ ADD] is not displayed.
4 Select the scene to be added to the

Playlist.

Creating the Playlist (continued)
3 Touch [ERASE]. 4 Select the scene to be deleted from

the list.

Touch [YES] to see the Playlist or [NO] to return to or tab. The selected scene is marked with. Press and hold the image on the LCD screen to confirm the image. Touch to return to the previous screen.
To add all the movies on the disc at the same time
Touch [ ADD ALL] in step 3.
To add all the still images on the disc in a Playlist
It is recommended that you create a Photomovie (p.92) beforehand, then add it in a Playlist.
When you add still images in a Playlist, they are converted automatically to a movie and added to tab. A movie converted from still images is shown with. The original still images remain on the disc. The resolution of the converted movie may be lower than that of the original still images.
To erase all the scenes at the same time
Touch [ERASE ALL] in step 3 t [YES].
The original scenes are not changed even though you erase the scenes from the Playlist.
Changing the order within the Playlist
Erasing unnecessary scenes from the Playlist

t [EDIT].

3 Touch [MOVE].
4 Select the scene to be moved.
4 Select the scene to be divided.

6 When printing is finished, touch

[END] t [END].

To print an image from a different media, touch [FUNC. SELECT] and start from step 3 in Connect your camcorder to the printer.

1 / 10 END

PRINT 101-0001

The still image appears.

Refer also to the instruction manual for the printer to be used.
Do not attempt the following operations when is on the screen. The operations may not be performed properly. Operate the POWER switch. Disconnect the USB cable (supplied) from the printer. Slide the disc cover OPEN switch. Remove the Memory Stick Duo from your camcorder. If the printer stops working, disconnect the USB cable (supplied), turn the printer off and on again and restart the operation from the beginning. If you print a still image recorded with a 16:9 (wide) ratio, left and right ends of the image may be cut off. Some printer models may not support the date printing function. Refer to your printers instruction manual for details. We cannot guarantee the printing of images recorded with a device other than your camcorder. Still images recorded by other devices that have a file size of 2MB or more, or are larger than pixels cannot be printed. PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA). You can print still images without using a computer by connecting a printer directly to a digital video camera or digital still camera, regardless of model or manufacturer.
Jacks to connect external devices
12.Open the jack cover. 4.Remove the shoe cover.
1 REMOTE jack (For DCR-DVD304E/DVD305E/ DVD755E)
Connect other optional accessories.
DCR-DVD304E/DVD305E/ DVD755E
2 A/V (audio/video) jack (p.52, 94, 96) 3 Shoe cover (For DCR-DVD304E/DVD305E/ DVD755E) 4 Active Interface Shoe (For DCR-DVD304E/DVD305E/ DVD755E) The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer also to the instruction manual supplied with your accessory for details.
The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. When you are recording with the external flash (optional), turn off the power of the external flash to prevent charging noise being recorded. When an external microphone (supplied or optional) is connected, it takes precedence over the internal microphone (p.44).

A problem has occurred in the remaining battery time indicator, or the battery pack has not been charged enough. Fully charge the battery again to correct the indication (p.19).
The remaining battery time indicator does not indicate the correct time.
The temperature of the environment is too high or too low. This is not a malfunction. The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one (p.19). The indicated time may not be correct depending on the environment of use. When you open or close the LCD screen, it takes about 1 minute to display the correct remaining battery time.
The battery pack is quickly discharged.
The temperature of the environment is too high or low. This is not a malfunction. The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one (p.19).
A problem occurs when the camcorder is connected to the AC Adaptor.
Turn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it again.

LCD screen/viewfinder

An unknown picture appears on the screen.
The camcorder is in [DEMO MODE] (p.77). Touch the LCD screen or insert a disc or Memory Stick Duo (For DCR-DVD304E/DVD305E/DVD755E) to cancel [DEMO MODE].
An unknown indicator appears on the screen.
They may be warning indicators or messages (p.125).
The picture remains on the LCD screen.
This occurs if you disconnect the AC Adaptor from the wall socket or remove the battery pack without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
During Easy Handycam operation (p.32), you cannot turn the LCD backlight on/off pressing and holding DISP/BATT INFO.
The buttons do not appear on the touch panel.
Touch the LCD screen lightly. Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander (For DCR-DVD304E/DVD305E/DVD755E) ) (p.25, 51).
The buttons on the touch panel do not work correctly or do not work at all.
Adjust the screen ([CALIBRATION]) (p.138).

A Memory Stick Duo is about half the size of a standard Memory Stick. The types of Memory Stick that support high speed data transfer. The speed of data transfer varies depending on the device to be used. MagicGate is a copyright protection technology that records and transfers the contents in an encrypted format. Note that data that uses MagicGate technology cannot be recorded or played on your camcorder.
Still image format: Your camcorder compresses and records image data in the JPEG (Joint Photographic Experts Group) format. The file extension is.JPG. File names of still images: 101- 0001: This file name appears on the screen of your camcorder. DSC00001.JPG: This file name appears on the display of a computer. A Memory Stick Duo formatted by a computer (Windows OS/Mac OS) does not have guaranteed compatibility with your camcorder.
About the Memory Stick (DCR-DVD304E/DVD305E/DVD755E) (continued)
x On a location for use Do not use or keep the Memory Stick Duo in the following locations.
Places subject to extremely high temperature, such as a car parked outside in the summer. Places under direct sunlight. Places with extremely high humidity or subject to corrosive gases.
When playing back image data modified on your computer. When playing back image data recorded with other devices.
x On the Memory Stick Duo Adaptor After inserting a Memory Stick Duo into the Memory Stick Duo Adaptor, you can use it with a standard Memory Stick compliant device.
When using a Memory Stick Duo with a Memory Stick compliant device, be sure to insert the Memory Stick Duo into a Memory Stick Duo Adaptor. When inserting a Memory Stick Duo into a Memory Stick Duo Adaptor, make sure the Memory Stick Duo is inserted facing in the correct direction, then insert it all the way in. Note that improper use may damage the device. Also, if you force the Memory Stick Duo into the Memory Stick Duo slot in the wrong direction, the Memory Stick Duo slot may be damaged. Do not insert a Memory Stick Duo Adaptor without a Memory Stick Duo attached. Doing so may result in malfunctions of the unit.

Index (continued)

Pre-installed rechargeable battery..139 Preparation Camcorder.18 Computer.101 Previous/next button..36, 37, 43 Print..98 PROGRAM AE.68, 116 Protect..62, 129 P.MENU.See Personal Menu
Personal Menu. 64, 83 PICT.APPLI. 75 Setup items.. 66 STANDARD SET. 78 STILL SET. 73 TIME/LANGU. 82 Using the Setup items. 64 SETUP ROTATE.. 81 Shoulder belt. 46 Slide show.. 47 Slide show button.. 37, 43, 48 Software.. 103 SP... 78 Speaker.. 47 Specifications. 141 SPORTS (Sports lesson). 68 SPOTLIGHT. 68 SPOT FOCUS.. 70 SPOT METER (Flexible spot meter). 68, 116 STANDARD. 74 STANDARD SET. 78 START/STOP.. 40 STEADYSHOT. 73, 113 Still image IMAGE SIZE. 74 QUALITY. 74 Recording. 35, 41 STILL MEDIA.. 35, 41 STILL SET.. 73 Sub sound.. 79 SUB-T DATE.. 81 SUMMERTIME. 26, 82 SUNSET&MOON.. 68 SUPER NSPLUS (Super NightShot plus).. 71, 116 SUR MONITOR. 79 System requirements.. 102 S VIDEO cable. 52, 94, 96 S VIDEO jack.. 52, 94, 96
Telephoto.. 44 Thumbnail.. 81 TIME/LANGU. (Language).. 82 Touch panel. 25 Transmitter.. 51 Tripod.. 46 TV.. 52 TV color system.. 130 TV TYPE.. 52

QUALITY..74

Unfinalizing.. 61 USB1.1.. 80, 102 USB2.0.. 80, 102 USB cable.. 18 USB driver.. 101 USB jack.. 100 USB SELECT.. 76 USB SPEED. 80 Using abroad.. 130
Rechargeable battery pack.. See Battery Recordable still images.74 Recording..34, 40 Recording format.14, 28 Recording time.20 REC MODE..78 REMAINING..81 Remaining battery.49 Remaining display Battery..47 Disc.49 Memory Stick Duo.47 Remote Commander.51 Remote sensor..47 RESET..47 Review..48 Review deleting..48
VBR. 15, 78 VF B.LIGHT (Viewfinder back light). 79 VF WIDE DISP (View finder wide display).. 80 VIDEO mode.. 14 Video operation buttons. 49 Viewfinder.. 24 Brightness. 79 Viewfinder lens adjustment.. 24 VISUAL INDEX screen.. 36, 42 Volume.. 43 VR mode.. 14
Self-diagnosis display.125 SELF-TIMER..71 SEPIA..76 Setup..64 CAMERA SET.68 MEDIA SET.77
Wall socket..19 Warning indicators.125 Warning messages.125 WHITE BAL. (White balance).69, 116 WHITE FADER.75 Wide angle..44 WIDE SELECT.30, 72 Windows..102 WIPE.75 World time difference.131 Write-protect tab..133

Zoom..44 Zoom lever..44

On trademarks
Handycam and are registered trademarks of Sony Corporation. Memory Stick, , Memory Stick Duo, , Memory Stick PRO Duo, , MagicGate, , MagicGate Memory Stick and MagicGate Memory Stick Duo are trademarks of Sony Corporation. InfoLITHIUM is a trademark of Sony Corporation. Picture Package is a trademark of Sony Corporation. DVD-R, DVD-RW, and DVD+RW logo are trademarks. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Dolby Digital 5.1 Creator and Dolby Digital Stereo Creator are trademarks of Dolby Laboratories. Microsoft, Windows, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries. Windows Media Player is a trademark of Microsoft Corporation. iMac, iBook, Macintosh, Mac OS, PowerBook and PowerMac are trademarks of Apple Computer, Inc in the U.S. and other countries. Macromedia and Macromedia Flash Player are trademarks or registered trademarks of Macromedia, Inc. in the United States and / or other countries. Pentium is a trademark or registered trademark of Intel Corporation. Nero 6 and other software products developed by Nero AG are registered trademarks of Nero AG and its subsidiaries and affiliates. Copyright Nero AG and its licensors 1996-2005 All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual.