Continued ,

Read this before operating your camcorder (Continued)
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Types of Memory Stick you can use in your camcorder
For recording movies, it is recommended that you use a Memory Stick PRO Duo of 512 MB or larger marked with:
PRO Duo)* (Memory Stick PRO-HG Duo) * You can use a Memory Stick PRO Duo marked either with Mark2 or without. (Memory Stick

Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
See page 29 for the recordable time of a Memory Stick PRO Duo.
Memory Stick PRO Duo/Memory Stick PRO-HG Duo (This size can be used with your camcorder.)

Notes on use

Your camcorder is supplied with two kinds of operations guides.
Operating Guide (This manual) PMB Guide for using your camcorder with a computer connected (stored on the supplied CD-ROM) (p. 91)
Types of the disc you can use in your camcorder
You can use the following discs only. 8cm DVD-RW 8cm DVD+RW 8cm DVD-R 8cm DVD+R DL Use the discs with marks listed below. See page 10 for details.
Memory Stick (You cannot use it in your camcorder.)
For reliability and durability of recording/ playback, we recommend that you use Sony *(for VIDEO discs or discs with a CAMERA) mark for your camcorder.
* Depending on the place you purchase, the disc has mark.

b Note

Using a disc other than the above may cause the unsatisfactory recording/playback or you may not be able to remove the disc from your camcorder.
Memory Stick PRO Duo and Memory Stick PRO-HG Duo are both referred to as Memory Stick PRO Duo in this manual. You cannot use any type of memory card other than those mentioned above. Memory Stick PRO Duo can be used only with Memory Stick PRO compatible equipment. Do not attach a label or the like on a Memory Stick PRO Duo or a Memory Stick Duo adaptor. When using a Memory Stick PRO Duo with Memory Stick compatible equipment, be sure to insert the Memory Stick PRO Duo into the Memory Stick Duo adaptor.

Step 5: Selecting media for movies
You can set the media to be used for movies. You can select a disc or a Memory Stick PRO Duo.
You can record, play back, or edit images on the selected media. When you record, play back, or edit images on other media, select media again.
To confirm the selected media
1 Slide the POWER switch to turn on the (Movie) lamp. 2 Confirm the media icon displayed at the upper right corner of the screen.

Media icon

1 Touch
(HOME) t (MANAGE MEDIA) t [MOVIE MEDIA SET]. The movie media setting screen appears. Disc (The icon differs depending on the disc type (p. 11).) Memory Stick PRO Duo
2 Touch the desired media. 3 Touch [YES]. 4 When [Completed.] appears,
touch. The movie media is changed.
Step 6: Inserting a disc or a Memory Stick PRO Duo

Inserting a disc

When you select [DISC] in Step 5, a new 8 cm DVD-RW, DVD+RW, DVD-R, or DVD+R DL is required (p. 11).
Remove dust or fingerprints from the disc beforehand, using a soft cloth (p. 113).
3 Set the disc with the recording
side facing your camcorder, then press the center of the disc until it clicks.
1 Check that the power of your

camcorder is on.

2 Slide the disc cover OPEN switch
in the direction of the arrow (OPEN l). [PREPARING TO OPEN] appears on the screen. The disc cover slightly opens automatically.
ACCESS lamp (Disc) Disc cover OPEN switch Pickup lens
Set the disc with the label side facing out when using a single-sided disc.

4 Close the disc cover.

[DISC ACCESS] appears on the screen. It may take some time for the camcorder to recognize the disc.

x DVD-RW/DVD+RW

A screen appears to ask whether you will use [DISC SELECT GUIDE]. Using [DISC SELECT GUIDE] lets you format the disc by following the guidance on the screen. If you do not want to use it, proceed to step 5.

x DVD-R/DVD+R DL

When the disc cover opens slightly, open it further.
You can start recording immediately after [DISC ACCESS] disappears from the screen. You do not need to proceed to steps after step 5.
5 Touch the option that is right for

you on the screen.

Be careful not to obstruct the operation with your hand or other objects, when opening or closing the disc cover. Move the grip belt to the bottom of the camcorder, then open or close the disc cover. If you catch the grip belt when closing the disc cover, it may cause your camcorder to malfunction. Do not touch the disc with the recording side or pickup lens (p. 117). When using a double-sided disc, take care not to smudge the surface with fingerprints. If you close the disc cover with the disc set incorrectly, it may cause your camcorder to malfunction. Do not disconnect the power sources while formatting a disc. Do not apply shock or vibration to your camcorder since your camcorder is reading/ writing on the disc: while the ACCESS lamp is on while the ACCESS lamp is flashing while [DISC ACCESS] or [PREPARING TO OPEN] is displayed on the LCD screen It may take some time to remove the disc depending on the recorded contents. It may take about 10 minutes to remove a disc if the disc has scratches or is dirty with fingerprints, etc. In that case, the disc might be damaged.

Recording time of movies on a Memory Stick PRO Duo
Figures in the table are approximate recording time in minutes of Memory Stick PRO Duo. Figures in ( ) are minimum recording time.
Recording mode 512MB 1GB 2GB 4GB 8GB 9M (HQ) (high quality) 6 (5) 10 (10) 25 (25) 55 (50) 115 (100) 6M (SP) 3M (LP) (standard (long play) quality) 9 (5) 15 (10) 20 (10) 35 (25) 40 (25) 80 (50) 80 (50) 160 (105) 170 (100) 325 (215)
Numbers in the table are of when using a Memory Stick PRO Duo made by Sony Corporation. The recordable time varies depending on the recording conditions, the type of Memory Stick, or the [REC MODE] setting (p. 73). When the recordable time is less than 5 minutes, appears.
See page 77 for the recordable numbers of still images.
Recording and playing back with ease (Easy Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform recording or playing back operation without detailed settings. It also makes the screen font size larger for easy viewing. The images are recorded on the selected media (p. 25).
If the POWER switch is set to OFF (CHG), turn it while pressing the green button.

Movies

Still Images

1 Turn the POWER switch

G until the (Movie) lamp lights up.
G until the (Still) lamp lights up.

2 Press EASY A.

appears on the screen.
3 Press START/STOP H (or D) to

start recording*.

3 Press PHOTO F lightly to adjust
the focus A (a beep sounds), then press it fully B (a shutter click sounds).

[STBY] t [REC]

To stop recording, press START/STOP again.
* Movies are recorded in the [SP] recording mode. z Tips

Flashing t Lights up

During Easy Handycam operation, a frame appears on a face of person ([FACE DETECTION], p. 76).
Playing back recorded movies/still images
1 Turn the POWER switch G to turn on your camcorder. 2 Press

To set the aspect ratio according to the connected TV (16:9/4:3)
Change the setting according to the screen aspect ratio of the TV you will view images on.
1 Turn on your camcorder. 2 Touch (HOME) t (SETTINGS) t [OUTPUT SETTINGS] t [TV TYPE] t [16:9] or [4:3] t.
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded images aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter. When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the 16:9 (wide) signal, set [TV TYPE] to [4:3].
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR.
You can display the counter on the TV screen by setting [DISP OUTPUT] to [V-OUT/PANEL] (p. 81).
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (optional) to view playback images.

TV/VCR

This category enables you to edit or print images on the media, or copy them onto your computer for viewing, editing or creating an original DVD.

Deleting images

You cannot restore images once they are deleted.
You can select up to 100 images at one time.

Deleting movies

(OTHERS) category b Notes
You can select the media of the image to be edited by touching (HOME) t (MANAGE MEDIA) t [MOVIE MEDIA SET] (p. 25).
Select beforehand the media which contains the movie you want to delete (p. 25).
When you select [DISC] on [MOVIE MEDIA SET] (p. 25), you cannot delete movies during Easy Handycam operation (p. 30). Cancel Easy Handycam operation first.

Item list

DELETE
You can delete images on the media (p. 46).
PHOTO CAPTURE (DCR-DVD910E)
You can capture a selected scene from a recorded movie as a still image (p. 49).
(HOME) t (OTHERS) t [DELETE].

MOVIE DUB (DCR-DVD910E)

You can dub movies recorded on a Memory Stick PRO Duo to a disc (p. 50).

Checking media information
You can check the remaining recordable time or space of the media selected on [MOVIE MEDIA SET] (p. 25).

Formatting media

Formatting deletes all images and returns the recording media to its original empty state. To avoid the loss of important images, dub them on other media (p. 50, 56) before performing [MEDIA FORMAT].
Touch (HOME) t (MANAGE MEDIA) t [MEDIA INFO]. You can check other information by touching. To turn off the display, touch.

Formatting a disc

The calculation for the space of a Memory Stick PRO Duo is 1MB = 1,048,576 bytes. The fractions less than 1 MB are discarded when the media space is displayed. Therefore, the total amount of available and unavailable space appears slightly smaller. Since there is an image database file area, the used space is not displayed as 0 MB even if you perform [MEDIA FORMAT] (p. 65).
A DVD-R/DVD+R DL cannot be formatted. Replace it with a new disc.
If you format a finalized disc
A DVD-RW (VIDEO mode) returns to the unfinalized state. The disc must be finalized again to view its contents on other devices. In the case of a DVD-RW (VR mode)/ DVD+RW, formatting deletes all movies on a finalized disc. Even after formatting, or will appear on the screen. You do not need to finalize the disc again before playing the disc on other devices.*
* To create the DVD menu on a DVD+RW, finalize the disc again (p. 63).
Only the information for the media selected on [MOVIE MEDIA SET] is displayed. Change the media setting as necessary (p. 25).
1 Connect the AC Adaptor to the
DC IN jack on your camcorder, then connect the power cord (mains lead) to the wall outlet (wall socket).
2 Turn on your camcorder. 3 Insert the disc to be formatted

into your camcorder.

Formatting media (Continued)
(HOME) t (MANAGE MEDIA) t [MEDIA FORMAT] t [DISC].
Formatting a Memory Stick PRO Duo
Select the aspect ratio of the movie, [16:9 WIDE] or [4:3], then touch.

2 Turn on your camcorder. 5 Touch [YES]. 3 Insert the Memory Stick PRO 6 When [Completed.] appears,
touch. Duo to be formatted into your camcorder.
Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during formatting. When you use a double-sided disc, formatting is required on each side. You can format each side in the different recording format. In the case of DVD+RW, you cannot change the movie aspect ratio midway. Format the disc again to change the aspect ratio. You cannot format a disc that has been protected on other devices. Cancel the protection with the original device, and then format it.
(HOME) t (MANAGE MEDIA) t [MEDIA FORMAT] t [MEMORY STICK].
5 Touch [YES] t [YES]. 6 When [Completed.] appears,
When you format a DVD-RW during Easy Handycam operation (p. 30), the recording format is fixed to VIDEO mode.
Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during formatting. Even the images protected with another device against accidental deletion are also deleted.
Recording additional movies after finalizing
Do not attempt the following operations when [Executing.] is on the screen: To operate the POWER switch or buttons To remove the Memory Stick PRO Duo
You can record additional movies on the finalized DVD-RW (VIDEO mode)/ DVD+RW discs after the following steps, if the disc has free space. When using the finalized DVD-RW (VR mode), you can record additional movies on the disc without any additional steps.
You cannot record additional movies on the DVD-R/DVD+R DL after finalizing. Use a new disc.
When using a DVD-RW (VIDEO mode) (Unfinalizing)
2 Turn on your camcorder. 3 Insert the finalized disc into your

camcorder.

(HOME) t (MANAGE MEDIA) t [UNFINALIZE].
Recording additional movies after finalizing (Continued)
Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during the operation. A DVD menu created during finalizing is deleted. For a double-sided disc, perform these steps for each side of the disc.

When using a DVD+RW

If you have created a DVD menu (p. 63) during finalizing, you must perform the following steps prior to recording additional movies.

INDEX SET

The camcorder detects faces automatically during movie recording. The default setting is [ON]. Face icons and their meanings : This icon appears when the setting is [ON]. : This icon flashes when your camcorder detects a face. The icon stops flashing when the face is recorded in Face Index. : This icon appears when faces cannot be recorded in Face Index. To play back scenes using Face Index, see p. 41.
The number of faces detected in a movie is limited.

PHOTO SETTINGS

Number of still images recordable on a Memory Stick PRO Duo (approx.) When the (Still) lamp is lit:

4.0M 2304 1728

512MB 1GB 2GB 4GB 8GB

When the

(Movie) lamp is lit:

IMAGE SIZE

B 4.0M (
The image size is fixed depending on the aspect ratio of the movie recorded.
[ 3.0M] in the aspect ratio 16:9 [2.2M] in the aspect ratio 4:3

2304 1728)

Records still images clearly in the 4:3 ratio.
Numbers in the table are of when using a Memory Stick PRO Duo made by Sony Corporation. The recordable number of still images varies depending on the recording conditions or the type of Memory Stick. The unique pixel array of Sonys ClearVid CMOS Sensor and image processing system BIONZ allow the still image resolution equivalent to the sizes described.

3.0M (

2304 1296)
Records still images clearly in the 16:9 (wide) ratio.

1.9M (

1600 1200)
Allows you to record more still images in relatively clear quality in the 4:3 ratio.

VGA (0.3M) (

640 480)
Allows the maximum number of still images to be recorded in the 4:3 ratio. b Notes
You can record still images of the image size set on [ IMAGE SIZE] only when the (still) lamp is lit.
You can use a Memory Stick PRO Duo with a capacity of 256MB or smaller for recording still images. The numbers in the table are of the recordable number of still images of the maximum image size that can be recorded with your camcorder. Check the actual recordable number on the screen when you are recording still images (p. 126).

FILE NO. (File number)

B SERIES
Assigns file numbers in sequence, even if the Memory Stick PRO Duo is replaced with another one.
PHOTO SETTINGS (Continued)

VIEW IMAGES SET

Assigns individual file numbers for each Memory Stick PRO Duo.

(HOME MENU) t page 71 The default settings are marked with B.

TV TYPE

See page 44.

DISP OUTPUT

B LCD PANEL
Shows displays such as the time code on the LCD screen and in the viewfinder.

V-OUT/PANEL

Shows displays such as the time code on the TV screen, LCD screen, and in the viewfinder.

CLOCK/ LANG

GENERAL SET

(HOME MENU) t page 71

CLOCK SET

See page 22.

DEMO MODE
You can view the demonstration in about 10 minutes, after you turn the POWER switch to (Movie). The default setting is [ON].
The demonstration will be suspended in the following situations. When you press START/STOP or PHOTO. When you touch the screen during the demonstration (The demonstration starts again after about 10 minutes). When you slide the disc cover OPEN switch. When you move the POWER switch to still image recording. When you press (HOME)/ (VIEW IMAGES).

AREA SET

You can adjust a time difference without stopping the clock. Set your local area using / when using your camcorder in other time zones. Refer to the world time difference on page 110.

SUMMERTIME

You can change this setting without stopping the clock. Set this to [ON] to move the time forward 1 hour.

LANGUAGE SET

You can select the language to be used on the LCD screen.
Your camcorder offers [ENG[SIMP]] (simplified English) for when you cannot find your native tongue among the options.

CALIBRATION

See page 117.
A.SHUT OFF (Auto shut off)

B 5min

The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes.
The camcorder is not automatically turned off. b Notes
When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to [NEVER].

QUICK ON STBY

You can set the time after which the camcorder turns off automatically in sleep mode. The default setting is [10min].
[A.SHUT OFF] does not work in sleep mode (p. 36).
REMOTE CTRL (Remote control)
You can use the supplied Remote Commander (p. 125). The default setting is [ON].
Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.
Activating functions using the
The OPTION MENU appears just like the pop-up window that appears when you right-click the mouse on a computer. Various functions are displayed.

OPTION MENU

3 Change the setting, then touch

Installing the software

x Environment for using Picture Motion Browser OS: Microsoft Windows 2000 Professional SP4/Windows XP SP2*/Windows Vista*
* 64-bit editions and Starter (Edition) are not supported. Standard installation is required. Operation is not assured if the above OS has been upgraded or in a multi-boot environment.
CPU: Intel Pentium III 1 GHz or faster Application: DirectX 9.0c or later (This product is based on DirectX technology. It is necessary to have DirectX installed.) Sound system: Direct Sound compatible sound card Memory: 256 MB or more Hard disk: Disk volume required for installation: Approximately 500 MB (5 GB or more may be necessary when creating a DVD.) Display: Minimum 1,dots Others: USB port (this must be provided as standard), Hi-Speed USB (USB 2.0 compatible is recommended), DVD burner (CD-ROM drive is necessary for installation.)
Your computer must meet hardware requirements other than those described above for each OS. Even in a computer environment where the operations are guaranteed, frames may be dropped from movies, resulting in uneven playback. However, imported images and images on discs created subsequently will not be affected. Operations are not guaranteed on all the recommended environments. For example, other open or background applications running on currently may limit product performance. Picture Motion Browser does not support 5.1ch surround sound reproduction. The sound is reproduced in 2ch sound. Continued ,
What you can do with Windows computer (Continued)
Depending on your computer, 8 cm media (DVD+R DL, etc.) cannot be used. If you use a Notebook PC, connect it to the AC Adaptor as the power source. Otherwise, the software will not work properly due to the power saving function of the PC. You can read images recorded on a Memory Stick PRO Duo in a Memory Stick slot of a computer. However, in the following cases, do not use the Memory Stick slot of the computer, but connect your camcorder to the computer with the USB cable: The computer is not compatible with a Memory Stick PRO Duo. A Memory Stick Duo adaptor is required. A Memory Stick PRO Duo cannot be read in the Memory Stick slot. Reading data from the Memory Stick slot is slow.

The playback image is distorted.
Clean the disc using a soft cloth (p. 113).
Images stored on a Memory Stick PRO Duo cannot be played back.
Images cannot be played back if you have modified files or folders, or have edited the
Playing back a disc on other devices
You cannot play back the disc, or the disc is not recognized.
Clean the disc using a soft cloth (p. 113). Finalize the disc (p. 61). A disc recorded in VR mode cannot be played back on a device that does not support VR mode. Check the compatibility in the instruction manual of the playback device.
When you play the disc on a computer or another playback device, the left and right sounds are heard out of balance.
This may happen when sound recorded with 5.1ch surround is converted to 2ch (normal stereo sound) on a computer or another playback device (p. 35). This is not a malfunction. If the playback device is a 2ch stereo system, change the audio conversion system (downmix system). For details, refer to the instruction manuals of the playback device. When you create a disc using the supplied Picture Motion Browser software, select 2ch for the audio setting. Record movies with [AUDIO MODE] set to [2ch STEREO] on your camcorder (p. 73).
is indicated on an image in the DVD menu.
Loading of the data may have failed while finalizing the disc. For the following discs, make the disc capable of additional recording (p. 67), then remake the DVD menu by finalizing the disc again (p. 61). The DVD menu may be displayed correctly. DVD-RW (VIDEO mode) DVD+RW
Playing back a Memory Stick PRO Duo on other devices
You cannot play back the Memory Stick PRO Duo, or the Memory Stick PRO Duo is not recognized.
The device may not support a Memory Stick PRO Duo.
Playback freezes for an instant between the scenes.
The image may freeze for an instant between scenes depending on the device being used. This is not a malfunction. In the case of a DVD+R DL, the image may freeze for an instant when the recording layer changes. This is not a malfunction.
Editing images on your camcorder

Unable to edit.

Select a media to be editted by touching (HOME) t (MANAGE MEDIA) t [MOVIE MEDIA SET] (p. 25). You cannot edit movies recorded on DVDR/DVD+R DL (p. 11). There are no images recorded. Unable to edit because of the condition of the image. You cannot edit an image protected on another device. You cannot dub movies from a disc to a Memory Stick PRO Duo.

Do not expose the disc to direct sunlight or leave it in a humid place. When you carry or store the disc, put it in its case. When you want to write letters or marks, etc. on a single-sided disc, write only on the printed side using an oil-based marker with a felt-tip, and do not touch the ink until it dries. Do not heat the disc or use a sharp-pointed tool, such as ball point pen. Do not dry the surface by heating. You cannot write, or mark, on doublesided discs.

About the Memory Stick

A Memory Stick is a compact, portable IC recording medium with a large data capacity. You can use only a Memory Stick Duo, which is about the half size of a standard Memory Stick, with your camcorder. However, we do not guarantee the operation of all types of Memory Stick Duo on your camcorder.
Types of Memory Stick Recording/ Playback
Memory Stick Duo (with MagicGate) Memory Stick PRO Duo Memory Stick PRO-HG Duo
Maintenance and precautions (Continued)
Do not insert anything other than a Memory Stick PRO Duo into the Memory Stick Duo slot. Doing so may cause a malfunction. Do not use or keep the Memory Stick PRO Duo in the following locations: Places subject to extremely high temperature such as a car parked outside in the summer Places under direct sunlight Places with extremely high humidity or subject to corrosive gases
x On the Memory Stick Duo adaptor
When using a Memory Stick PRO Duo with a Memory Stick compliant device, be sure to insert the Memory Stick PRO Duo into a Memory Stick Duo adaptor. When inserting a Memory Stick PRO Duo into a Memory Stick Duo adaptor, make sure the Memory Stick PRO Duo is inserted facing in the correct direction, then insert it all the way in. Note that improper use may cause a malfunction. Also, if you force the Memory Stick PRO Duo into the Memory Stick Duo adaptor in the wrong direction, the Memory Stick PRO Duo may be damaged. Do not insert a Memory Stick Duo adaptor without a Memory Stick PRO Duo attached into a Memory Stick compliant device. Doing so may result in malfunctions of the device.
Design rule for Camera File system universal standard established by the JEITA (Japan Electronics and Information Technology Industries Association). On your camcorder, you cannot play back still images recorded on other devices (DCRTRV900E or DSC-D700/D770) that do not conform to the universal standard. (These models are not sold in some regions.) If you cannot use a Memory Stick PRO Duo that has been used with another device, format it with your camcorder (p. 66). Note that formatting erases all information on the Memory Stick PRO Duo. You may not be able to play back images with your camcorder: if image data are modified on a computer. if image data are recorded with other devices.

Mass (Approx.)

460 g (1 lb) main unit only 550 g (1 lb 3 oz) including the supplied rechargeable battery pack NP-FH60 and a disc

Supplied accessories

See page 18.

AC Adaptor AC-L200/L200B

AC 100 V - 240 V, 50/60 Hz

Current consumption

0.35 A - 0.18 A

Power consumption

Output voltage

DC 8.4 V*

81 mm (1 15/3/1/4 in.) (whd) excluding the projecting parts
170 g (6 oz) excluding the power cord (mains lead) * See at the label of AC Adaptor for other specifications.
Rechargeable battery pack NP-FH60

Maximum output voltage

DC 8.4 V

DC 7.2 V

Capacity
7.2 Wh (mAh) Type Li-ion Design and specifications are subject to change without notice.

Notes on the License

ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET, SUITE 300, DENVER, COLORADO 80206. C Library, Expat, zlib, and libjpeg software are provided in your camcorder. We provide this software based on license agreements with their owners of copyright. Based on requests by the owners of copyright of these software applications, we have an obligation to inform you of the following. Please read the following sections. Read license1.pdf in the License folder on the CD-ROM. You will find licenses (in English) of C Library, Expat, zlib, and libjpeg software.
On GNU GPL/LGPL applied software
The software that is eligible for the following GNU General Public License (hereinafter referred to as GPL) or GNU Lesser General Public License (hereinafter referred to as LGPL) are included in the camcorder. This informs you that you have a right to have access to, modify, and redistribute source code for these software programs under the conditions of the supplied GPL/LGPL. Source code is provided on the web. To download, go to the following website and select DCR-DVD810. http://www.sony.net/Products/Linux/ We would prefer you do not contact us about the contents of source code. Read license2.pdf in the License folder on the CD-ROM. You will find licenses (in English) of GPL, and LGPL software. To view the PDF, Adobe Reader is needed. If it is not installed on your computer, you can download it from the Adobe Systems web page: http://www.adobe.com/
Identifying parts and controls
The numbers in ( ) are reference pages.
A Power zoom lever (35, 42) B PHOTO button (30, 34) C POWER switch (22) D /CHG (flash/charge) lamp (19) E QUICK ON button/lamp (36) F A/V Remote Connector (44, 56) Connect other optional accessories. G DC IN jack (19) H Built-in microphone (35) An Active Interface Shoe compatible microphone (optional) will take precedence when connected. I Disc cover OPEN switch (26) J ACCESS lamp (Disc) (26) K Disc cover (26) L (Movie)/ (Still) mode lamps (22) M START/STOP button (30, 34) N Grip belt (24) O Hook for a shoulder belt Attach a shoulder belt (optional).

www.sony.com.sg/handycam

All HD Models come with Purchase with Purchase of DPF-D70 at

High Denition Handycam

HDR-CX12E
Memory Stick Memory Stick

HDR-TG1E

with Pure Titanium Body

SENSOR with Exmor

DETECTION

MEGA PIXELS

WIDE SCREEN
4GB Memory Stick ( Included )

STEADY SHOT

FREE GIFT

(OPTIC AL )

( OPTICAL )

$2,299

ACC-MHC6 Accessory Kit MS-MT8G DPP-FP65 Memory Stick Portable Photo Printer Sonys Vegas Movie Studio Platinum Edition (Worth $270)

(Wor t h $ )

*Terms & Conditions Apply

$1,999

ACC-TCH5 Accessory Kit

MS-MT8G Memory Stick

Sonys Vegas Movie Studio Platinum Edition (Worth $270)

HDR-SR12E/11E/10E

MiniDV

(OP TI CAL )

HDR-HC9E

SENSOR

HDR-SR12E

48 hours HD Video

(OPTICAL)

HDR-SR12E/11E

$2,899

HDR-SR11E HDR-HC9E

FREE $2,599 + GIFT $1,999
ACC-MHC6 Accessory Kit DPP-FP65 Portable Photo Printer Sonys Vegas Movie Studio Platinum Edition (Worth $270)

ACC-MHC6 Accessory Kit

DPP-FP65 Portable Photo Printer

DVM63HD MiniDV Tape

Standard Denition Handycam
Enjoy Long HDD Recording Times DVD Camcorders are Easiest to Share

DCR-SR45E

Up to 20 hours

8cm DVD

DCR-DVD610E

OPTICAL ZOOM

Memory Stick

Tripod

ACC-DVDH Accessory Kit
Enjoy Long HDD Recording Times
DVD Camcorders are Easiest to Share
Use Existing MiniDV Tape to Record

DCR-SR220E

Up to 41 hours

DCR-SR85/65E

DCR-DVD710E/810E/ 910E

( O P T I C A L)

DCR-HC62/52E

(O PTICA L )

DCR-HC62E

DCR-SR85E

DCR-DVD910E

Up to 27 hours

DCR-HC52E

DCR-SR65E

DCR-DVD810E/710E

8GB Internal Memory

(E l e c tr o n i c )

$1,399

DCR-DVD810E

FREE $1,599 + GIFT

$1,199
ACC-MHC6 Accessory Kit Tripod DPP-FP65 Portable Photo Printer

$999 + $699

DCR-DVD910E)

Tripod (Only for

DCR-DVD710E

(Only for DCR-DVD910E)

5pcs-DVM60R3 MiniDV Tape

LCS-X10 Accessory Kit

Business Registration No. 53018421D