3-287-850-11(1)

Digital Video Camera Recorder

Operating Guide

DCR-SR210E/SR220E
For details on the advanced operations, please refer to Handycam Handbook (PDF).

2008 Sony Corporation

Read this first
Before operating the unit, please read this manual thoroughly, and retain it for future reference.

3 meters (9.8 feet).

Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again.

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture. Do not expose the batteries to excessive heat such as sunshine, fire or the like.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable Accessories: Remote Commander

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result.
Notice for customers in the United Kingdom
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362 (i.e., marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

FOR CUSTOMERS IN EUROPE

ATTENTION
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment
and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-oflife to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Regulatory Information

Declaration of Conformity Trade Name: SONY Model No.: DCR-SR220E Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A Telephone number: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

DCR-SR220E

is to be used with the Handycam Station Model DCRA-C220 and AC Adaptor Model AC-L200/L200B.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
For customers in the U.S.A.
If you have any questions about this product, you may call: Sony Customer Information Center 1-800222-SONY (7669). The number below is for the FCC related matters only.
the interference by one or more of the following measures:

Reorient Increase

or relocate the receiving antenna. the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.

Using the camcorder

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

not try to format the hard disk of the camcorder using a computer. If you do so, your camcorder may not operate correctly.

Table of contents

Note on disposal/transfer

Read this first..2

you perform [MEDIA FORMAT]* to format the hard disk of the camcorder, data may not be completely deleted from the hard disk. When you transfer the camcorder, it is recommended that you perform [ EMPTY]* to prevent the recovery of your data. In addition to the above, when you dispose of the camcorder, it is recommended that you destroy the actual body of the camcorder.

Getting Started

Step 1: Charging the battery pack..7 Step 2: Turning the power on, and setting the date and time.9
Changing the language setting. 9

About language setting

Step 3: Selecting the media.. 10
on-screen displays in each local language are used for illustrating the operating procedures. Change the screen language before using your camcorder if necessary (p.9).

Recording/Playback

Recording.. 12 Playback.. 13
Playing the image on a TV.. 14

About this manual

LCD screens and indicators shown in this manual were taken with a digital still camera, and may look different from what you actually see. In this Operating Guide, the hard disk and Memory Stick PRO Duo are called media. The screenshots are from Windows Vista, and may vary depending on the operating system of the computer. * Refer also to Handycam Handbook (PDF) and PMB Guide.
Other parts and functions of the camcorder.. 15 Indicators displayed during recording/ playback.. 17 Performing various functions HOME and OPTION.. 19 Saving images.. 21 Deleting images.. 22

Enjoying with a computer

Performing with a computer.. 23.
Handbook/software to be installed. 23 Installing Picture Motion Browser. 23.

Troubleshooting

Troubleshooting... 26
Self-diagnosis display/Warning indicators... 27

Additional Information

Precautions... 29 Specifications.. 31

The images are recorded on the media selected on the media setting (p.10). In the default setting, both movies and still images are recorded on the hard disk.

START/STOP

: To record movies : To record still images [STBY] [REC]

PHOTO

Flashing Lights up
1 Turn the POWER switch until the respective lamp lights up.
Press the green button only when the POWER switch is in the OFF (CHG) position.

2 Start recording.

Movies
Press START/STOP (or ). To stop recording, press START/STOP again.

Still Images

Press PHOTO lightly to adjust the focus (a beep sounds), then press it fully (a shutter click sounds). appears beside or. When disappears, the image has been recorded.
Tips You can check the recordable time and the remaining capacity, etc., by touching (HOME) (MANAGE MEDIA) [MEDIA INFO]. You can capture still images by pressing PHOTO during movie recording. The maximum continuous recordable time is approximately 13 hours.
a movie file exceeds 2 GB, the next movie file is created automatically.

Playback

You can play back images recorded on the media selected in the media setting (p.10). The default setting is the hard disk.

(VIEW IMAGES) button

POWER switch (VIEW IMAGES) button
HOME MENU Previous 6 images Next 6 images Returns to the recording screen Displays movies Displays still images (OPTION) Searches for images by date Goes to the (Face Index) screen Goes to the (Film Roll Index) screen
1 Turn the POWER switch to turn on your camcorder. 2 Press the
(VIEW IMAGES) (or ) button. The VISUAL INDEX screen appears on the LCD screen. (It may take some seconds.)

3 Start playback.

Touch the tab, and the movie to be played back.
Goes to beginning of the scene/ previous movie Toggles Play or Pause as you touch Next movie
Touch the tab, and the still image to be played back.

Slide show button

Stop (goes to the VISUAL Reverse/Forward INDEX screen)
Goes to the VISUAL INDEX screen

Previous/ Next

To adjust the volume of movies
When playing back a movie, touch (OPTION) tab [VOLUME], then adjust the volume with /.
Tips appears with the image on each of the tab that was lastly played back/recorded. When you touch image marked with , you can play it back from the point you have stopped previously.
Playing the image on a TV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable (supplied) or an A/V connecting cable with S VIDEO (optional). For details, see Handycam Handbook (PDF).

A/V OUT jack

(Yellow) (White)

(Yellow)

(Red) IN

: Signal flow VCR or TVs

Other parts and functions of the camcorder
Buttons, jacks, etc., which are not explained in other chapters, are explained here.

* You can set the item during Easy Handycam operation. **The menu name is changed to [SOUND SETTINGS] during Easy Handycam operation.
[HDD], [MEMORY STICK] [HDD], [MEMORY STICK]

Saving images

Items of the OPTION MENU
Items you can set only on the OPTION MENU will be described below. Due to the limited capacity of the media, make sure that you save the image data to some type of external media such as a DVD-R or a computer. You can save the images recorded on the camcorder as described below.
[FOCUS], [SPOT FOCUS], [TELE MACRO], [EXPOSURE], [SPOT METER], [SCENE SELECTION], [WHITE BAL.], [COLOR SLOW SHTR], [SUPER NIGHTSHOT]

Using a computer

By using Picture Motion Browser on the supplied CD-ROM, you can save images recorded on your camcorder. For details, see PMB Guide on the supplied CDROM.
[FADER], [D.EFFECT], [PICT.EFFECT]
[BLT-IN ZOOM MIC], [MICREF LEVEL], [SELF-TIMER], [TIMING], [RECORD SOUND]
Creating a DVD with One Touch (One Touch Disc Burn)
You can save images recorded on the hard disk of the camcorder directly to a DVD with ease by pressing (DISC BURN) button.
(A tab depends on the situation)/No tab
[SLIDE SHOW], [SLIDE SHOW SET], [COPIES], [DATE/TIME], [SIZE]
Saving images on a computer (Easy PC Back-up)
You can save images recorded on the camcorder on the hard disk of a computer.
Creating a DVD with selected images
You can save images imported to your computer on a DVD. You can also edit those images.
Connecting your camcorder to other devices
For details, see Handycam Handbook (PDF).
Connecting with the A/V connecting cable
You can dub to VCRs, DVD/HDD recorders.
Connecting with the USB cable
You can dub to movie dubbing compatible DVD writers, etc.

Deleting images

Tips can dub movies or copy still images from the hard disk to a Memory Stick PRO Duo.
Touch (HOME) (OTHERS) [MOVIE DUB]/[PHOTO COPY].
Select the media which contains the images you want to delete before the operation (p. 10).

Deleting movies

(HOME) [DELETE]. DELETE]. DELETE].

(OTHERS)

2 Touch [ 3 Touch [
4 Touch the movie to be deleted.
The selected movie is marked with.

5 Touch

[YES]
To delete all movies at one time
In step 3, touch [ DELETE ALL] [YES] [YES] .
To delete the still images
In step 2, touch [ DELETE]. Touch [ DELETE], then touch the still image to be deleted. The selected still image is marked with. Touch [YES] . Tips To delete all still images on the media, in step , touch [ DELETE ALL] [YES] [YES] .
Performing with a computer
Handbook/software to be installed

Handycam Handbook (PDF)

Handycam Handbook (PDF) explains in detail about your camcorder and its practical use.
Picture Motion Browser (only for Windows users) Select the desired language and the model name of your Handycam, then click [Handycam Handbook (PDF)]. Installation starts. When the installation is completed, the short-cut icon of Handycam Handbook (PDF) appears on the desktop of your computer. The model name of your Handycam is printed on its bottom surface. Click [Exit] [Exit], then remove the CDROM from the disc drive of your computer. To view Handycam Handbook (PDF), double click the short-cut icon. Tips For Macintosh users, follow the steps below. Turn on the computer. Place the CD-ROM (supplied) in the disc drive of your computer. Open the [Handbook] folder in the CD-ROM, double-click the [GB] folder and then drag-and-drop the Handycam Handbook on the computer. To view Handycam Handbook (PDF), double click Handbook.pdf.
Picture Motion Browser is the supplied software. You can enjoy the following operations.

Creating

a DVD with one touch operation images to a computer Editing the imported images Creating a DVD

Importing

supplied software Picture Motion Browser is not supported by Macintosh computers. To use a Macintosh computer connected to your camcorder, see the following website for details. http://guide.d-imaging.sony.co.jp/mac/ms/us/
Installing and viewing Handycam Handbook (PDF)
To view Handycam Handbook (PDF), you need to install Adobe Reader on your computer. Continue with the installation, even if a confirmation screen of an unknown publisher appears.
Turn on the computer. Place the CD-ROM (supplied) in the disc drive of your computer. The select screen for installation appears.

is because the power has been turned on for a long time. This is not a malfunction.
The power abruptly turns off.
the AC Adaptor. on the power again. Charge the battery pack (p.7).
Pressing START/STOP or PHOTO does not record images.
The power does not turn on.

Attach

a charged battery pack to the camcorder (p.7). Connect the plug of the AC Adaptor to the wall outlet (wall socket) (p.7).
the POWER switch to (Movie) or (Still) (p.9). You cannot record images in sleep mode. Press the QUICK ON button. Your camcorder is recording the image you have just shot on the media. You cannot make new recording during this period. The media of the camcorder is full. Delete unnecessary images (p.22). Total number of movies or still images exceeds the recordable capacity of the media. Delete unnecessary images (p.22).
The camcorder does not operate even when the power is set to on.

The recording stops.

takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction. Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press the RESET button (p.15) using a sharp-pointed object. (If you press the RESET button, all settings, including the clock setting, are reset.) The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Turn off the camcorder
temperature of your camcorder is extremely high/low. Turn off your camcorder and leave it for a while in a cool/warm place.
You cannot install Picture Motion Browser.
the computer environment required to install Picture Motion Browser. Install Picture Motion Browser in an orderly manner (p.23).
Picture Motion Browser does not work correctly.

Indicators/Messages

Causes/Soiutions
Picture Motion Browser and restart your computer.
Your camcorder is not recognized by the computer.

Disconnect

E:20: / E:31: / E:61: / E:62: / E:91: / E:94: 101-0001
devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the USB cable from the computer and the Handycam Station, and restart the computer, then connect the computer and your camcorder again in an orderly manner.
Self-diagnosis display/Warning indicators
If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility.
Indicators/Messages Causes/Soiutions

C:13: / C:32:

battery pack is not an InfoLITHIUM battery pack (H series). Use an InfoLITHIUM battery pack (H series) (p.7). Connect the DC plug of the AC Adaptor to the DC IN jack of the Handycam Station or your camcorder securely (p.7). Remove the power source. Reconnect it and operate your camcorder again.

malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5-digit code, which starts from E. The file is damaged or unreadable. An error may have occurred with the hard disk drive in your camcorder. Delete unnecessary images. Battery power is low. The temperature of your camcorder is getting higher or extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Make the camcorder warm. When the indicator flashes slowly, free space for recording images are running out. No Memory Stick PRO Duo is inserted (p.10). When the indicator flashes quickly, there are not enough free space for recording images. Delete unnecessary images, or format the Memory Stick PRO Duo after storing the images on other media (p. 21). The Image Database File is damaged.
Memory Stick PRO Duo is damaged. Format the Memory Stick PRO Duo with your camcorder. An incompatible Memory Stick PRO Duo is inserted. Access to the Memory Stick PRO Duo was restricted on another device. There is something wrong with the flash. The amount of light is not sufficient, so camera-shake easily occurs. Use the flash. The camcorder is unsteady, so camerashake easily occurs. Hold the camcorder steady with both hands and record the image. However, note that the camera-shake warning indicator does not disappear. Media capacity is full. Still images cannot be recorded during processing. Wait for a while, then record. Drop sensor activated. Recording/playback may be disabled.

Precautions

On use and care
not use or store the camcorder and accessories in the following locations: Anywhere extremely hot, cold or humid. Never leave them exposed to temperatures above 60C (140 F), such as under direct sunlight, near heaters or in a car parked in the sun. They may malfunction or become deformed. Near strong magnetic fields or mechanical vibration. The camcorder may malfunction. Near strong radio waves or radiation. The camcorder may not be able to record properly. Near AM receivers and video equipment. Noise may occur. On a sandy beach or anywhere dusty. If sand or dust gets in your camcorder, it may malfunction. Sometimes this malfunction cannot be repaired. Near windows or outdoors, where the LCD screen or the lens may be exposed to direct sunlight. This damages the LCD screen. Operate your camcorder on DC 6.8 V/7.2 V (battery pack) or DC 8.4 V (AC Adaptor). For DC or AC operation, use the accessories recommended in these operating instructions. Do not let your camcorder get wet, for example, from rain or sea water. If your camcorder gets wet, it may malfunction. Sometimes this malfunction cannot be repaired. If any solid object or liquid gets inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further. Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens. Keep the POWER switch setting to OFF (CHG) when you are not using your camcorder. Do not wrap your camcorder with a towel, for example, and operate it. Doing so might cause heat to build up inside. When disconnecting the power cord (mains lead), pull it by the plug and not the cord. Do not damage the power cord (mains lead) such as by placing anything heavy on it. Keep metal contacts clean. Keep the Remote Commander and button-type battery out of childrens reach. If the battery

is accidentally swallowed, consult a doctor immediately. If the battery electrolytic liquid has leaked: consult your local authorized Sony service facility. wash off any liquid that may have contacted your skin. if any liquid gets in your eyes, wash with plenty of water and consult a doctor.
When not using your camcorder for a long time

Periodically

turn it on and let it run such as by playing back or recording images for about 3 minutes. Use up the battery pack completely before storing it.

LCD screen

not exert excessive pressure on the LCD screen, as it may cause damage. If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction. While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.
To clean the LCD screen If fingerprints or dust make the LCD screen dirty, it is recommended you use a soft cloth to clean it. When you use the LCD Cleaning Kit (optional), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid.

On handling the casing

the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth. Avoid the following to avoid damage to the finish: Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen. Handling the camcorder with above substances on your hands. Leaving the casing in contact with rubber or vinyl objects for a long period of time.
About care and storage of the lens
Commander until it clicks.
the surface of the lens clean with a soft cloth in the following instances: When there are fingerprints on the lens surface. In hot or humid locations When the lens is exposed to salty air such as at the seaside. Store in a well-ventilated location subject to little dirt or dust. To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time.

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
On charging the pre-installed rechargeable battery
Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to OFF (CHG). The pre-installed rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the pre-installed rechargeable battery. However, even if the pre-installed rechargeable battery is not charged, the camcorder operation will not be affected as long as you are not recording the date. Procedures Connect your camcorder to a wall outlet (wall socket) using the supplied AC Adaptor, and leave it with the POWER switch set to OFF (CHG) for more than 24 hours.
the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
To change the battery of the Remote Commander
While pressing on the tab, inset your fingernail into the slit to pull out the battery case. Place a new battery with the + side facing up. Insert the battery case back into the Remote

Specifications

System
Video compression format: MPEG2/JPEG (Still images) Audio compression format: Dolby Digital 2/5.1ch Dolby Digital 5.1 Creator Video signal: PAL color, CCIR standards Hard Disk: 60 GB When measuring media capacity, 1GB equals 1 billion bytes, a portion of which is used for data management. Recording format: Movie: MPEG2-PS Still image: Exif Ver.2.2 * Image device: 3.6 mm (1/5 type) CMOS sensor Recording pixels (still image, 4:3): Max. 4.0 mega (1 728) pixels** Gross: Approx. 000 pixels Effective (Movie, 16:9) Approx. 000 pixels Effective (Still image, 16:9) Approx. 000 pixels Effective (Still image, 4:3) Approx. 000 pixels Lens: Carl Zeiss Vario-Sonnar T Optical:15 , Digital: 30, 180 Filter diameter: 30 mm (1 3/16 in.) Focal length: F=1.8 - 2.6 f=3.1 - 46.5 mm (1/8 - 1 7/8 in.) When converted to a 35 mm still camera For movies: 40 - 600 mm (1 5/8 - 23 5/8 in.) (16:9) For still images: 37 - 555 mm (1 1/2 - 21 7/8 in.) (4:3) Color temperature: [AUTO], [ONE PUSH], [INDOOR] (K), [OUTDOOR] (5800 K) Minimum illumination: 5 lx (lux) (when [AUTO SLW SHUTTR] is set to [ON], Shutter speed 1/25 second) 0 lx (lux) (during NightShot function) * Exif is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorders setting information at the time of recording. **The unique pixel array of Sonys ClearVid CMOS Sensor and image processing system (BIONZ) allows still image resolution equivalent to the sizes described.

Input/Output connectors

A/V Remote Connector: Video/audio output jack USB jack: mini-B (DCR-SR210E: output only)
Picture: 6.7 cm (2.7 type, aspect ratio 16:9) Total number of pixels: (960 220)

General

Power requirements: 6.8 V/7.2 V (battery pack) 8.4 V (AC Adaptor) Average power consumption: Hard disk: 3.5 W Memory Stick PRO Duo: 3.5 W Operating temperature: 0C to + 40C (32 F to 104 F) Storage temperature: -20C to + 60C (-4 F to + 140 F) Dimensions (Approx.): 129 mm (3 1/5 1/8 in.) (whd) including the projecting parts 134 mm (3 1/5 3/8 in.) (whd) including the projecting parts with supplied battery pack attached Mass (Approx.): 470 g (1 lb) main unit only 550 g (1 lb 3 oz) including the supplied rechargeable battery pack
Handycam Station DCRA-C220 Input/Output connector
A/V OUT jack: Video/audio output jack USB jack: mini-B (DCR-SR210E: output only)

AC Adaptor AC-L200/L200B

Power requirements: AC 100 V - 240 V, 50/60 Hz Current consumption: 0.35 0.18A Power consumption: 18 W Output voltage: DC 8.4 V* Operating temperature: 0C to + 40C (32 F to 104 F) Storage temperature: -20C to + 60C (-4 F to + 140 F)
Dimensions (Approx.): 81 mm (1 15/3/1/4 in.)(whd) excluding the projecting parts Mass (Approx.): 170 g (6.0 oz) excluding the power cord (mains lead) * See the label of AC Adaptor for other specifications.

On trademarks

Handycam
Rechargeable battery pack NP-FH60
Maximum output voltage: DC 8.4 V Output voltage: DC 7.2 V Capacity: 7.2 wh (mAh) Type: Li-ion Design and specifications are subject to change without notice. Manufactured under license from Dolby Laboratories.
and are registered trademarks of Sony Corporation. Memory Stick, , Memory Stick Duo, , Memory Stick PRO Duo, , Memory Stick PRO-HG Duo, , Memory Stick Micro, MagicGate, , MagicGate Memory Stick and MagicGate Memory Stick Duo are trademarks or registered trademarks of Sony Corporation. InfoLITHIUM is a trademark of Sony Corporation. BIONZ is a trademark of Sony Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Microsoft, Windows, Windows Media, Windows Vista, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the U.S. and other countries. Intel, Intel Core, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Adobe, the Adobe logo, and Adobe Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual.

Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.

http://www.sony.net/

Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Printed in Japan