Multimedia Lab These are basic steps to operate the Sony DHR-1000 deck in the Multimedia Lab. Sony DHR-1000 (Large silver deck) The Sony DHR-1000 deck is connected trough firewire cable to the back of the G5, leaving the front firewire port free to connect firewire external hardrives.
The Sony DHR-1000 deck can play/output in DV and DVCAM. This multimedia lab deck has a broken Operation Panel plate, so please do not attempt to push the plate into the deck because it will not work. This issue does not affect the efficiency of the device. In order to Capture from a MiniDV or DVCAM tape: 1) Turn on the deck. 2) The channel indicator in the display window should read DV in. It cannot read L1, L-2 #-ch. If it does not read DV in then select the deck channel DV by pressing down the channel - or + buttons located on the right side of the operation panel plate.
3) When you go to capture window in Final Cut Pro, the screen controls should operate the deck. In order to Output to a MiniDV tape: 1) Turn on the deck. 2) The channel indicator in the display window should read DV in. It cannot read L1, L-2 #-ch. If it does not read DV in then select the deck channel DV by
copyright President & Fellows of Harvard College
http://lab.dce.harvard.edu/
pressing down the channel - or + buttons located on the right side of the operation panel plate. 3) Follow the Print to Video steps in order to output to the MiniDV tape. Make sure you select the Automatically Start Recording option in the bottom left of the Print to Video window in order to have the deck working in sync and automated with Final Cut Pro.
Created by Tatiana Dallalana-Young, Edited by Tony Hale 2006