Attention

The electromagnetic fields at the specific frequencies may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc) again.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\020REG.fm Master: Left 010COV.book Page 4 Wednesday, August 25, 2010 12:06 PM

Notice for users

Program 2010 Sony Corporation Documentation 2010 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. Any design data such as sample pictures provided in this software cannot be modified or duplicated except for the purpose of personal use. Any unauthorized duplication of this software is prohibited under copyright law. Please note that unauthorized duplication or modification of portraits or copyrighted work could infringe the rights reserved by rights holders.

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\010TOC.fm Master: Right 010COV.book Page 5 Wednesday, August 25, 2010 12:06 PM

Table of Contents

Read this before using... 4
Checking included items.... 7 Identifying the parts.... 8 x Digital photo frame.... 8 x Remote control.... 9
Remote control.... 10 Stand.... 10 To display the photo frame on the wall... 11 Turning the photo frame on... 12 Operations in an initial state... 13 Setting the current time... 13
Inserting a memory card... 14 Changing the display... 15 Playing a video file.... 17 Playing a slideshow with background music.. 18 Importing a music file.... 18 Selecting a music file to play... 18 Playing background music with a slideshow... 19
Various functions... 20 Sorting images (Filtering)... 21 Specifying the playback device... 22 Adjusting image size and orientation (Zoom in/Zoom out/Rotate).. 22 Changing the settings of the auto power on/off function. 23 Using the alarm function... 24

Continued

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\010TOC.fm Master: Left 010COV.book Page 6 Wednesday, August 25, 2010 12:06 PM
Changing the settings...25 Maintenance mode....26 Activating maintenance mode.... 26 Initializing the system.... 27 Connecting to a high-definition TV (DPF-XR100 only).28 Operating an external device connected to the photo frame..29 Connecting to a computer...30
If an error message appears...31 If trouble occurs...32
Precautions....34 Installation.... 34 Cleaning.... 34 Restrictions on duplication... 34 Disposing of the photo frame... 34 Specifications....35 On trademarks and copyrights... 37
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\030C01.fm Master: Right.L0 010COV.book Page 7 Wednesday, August 25, 2010 12:06 PM
For your safety For your safety For your safety

Checking included items

Make sure that the following items are included. Digital photo frame (1)

Stand (1)

Attaching to the screw hole (page 10)
Remote control (1) Removing the protective sheet (page 10)
AC adaptor (1) Connecting to the AC power source (page 12)
Hanging unit on the wall (1) Screws (4) Operating Instructions (this manual) (1) Digital Photo Frame Handbook (1) Warranty (1) (In some regions, the warranty is not supplied.)

The supplied CD-ROM contains the Digital Photo Frame Handbook that explains operations and setups of the digital photo frame in detail. To view the handbook, insert the CD-ROM into the computer and double-click the Handbook icon. (To display the handbook, you need Adobe Acrobat Reader. )
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\030C01.fm Master: Left 010COV.book Page 8 Wednesday, August 25, 2010 12:06 PM

Identifying the parts

x Digital photo frame
LCD screen Remote sensor Sony logo (page 10)
VIEW MODE button (page 15) 1 (on/standby) button Standby indicator Access lamp
Memory card slot (page 14)

MENU button

Direction (B/b/v/V) buttons, ENTER (

) button

BACK button
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\030C01.fm Master: Right 010COV.book Page 9 Wednesday, August 25, 2010 12:06 PM
USB mini-B connector (page 30) USB A connector (page 29) HDMI OUT connector (page 28) (DPF-XR100 only) Reset switch DC IN 9 V jack Stand Holes for hanging unit on the wall

x Remote control

VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( CLOCK ( ) button SINGLE button ) button INDEX ( MENU button Zoom in ( ) button Direction (B/b/v/V) buttons BACK button MARKING ( ) button IMPORT ( SORT button SELECT DEVICE button DELETE ( ROTATE ( ) button ) button ) button ENTER ( ) button ) button

Zoom out ( ) button

About descriptions in this manual The operations described in this manual are based on remote control operation. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\040C02.fm Master: Left.L0 010COV.book Page 10 Wednesday, August 25, 2010 12:06 PM
P Note If the remote control stops working:
Replace the battery (CR2025 lithium battery) with a new one.

Remote control

Pull out the protective sheet before use as shown in the figure.

P WARNING

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Protective sheet

Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame.

Replacing procedures:

CD-ROM (Handbook), Preparing the remote control
x When the photo frame is placed in the portrait orientation
The display is automatically rotated on the portrait orientation.
Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel.

x Sony logo

When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\040C02.fm Master: Right 010COV.book Page 11 Wednesday, August 25, 2010 12:06 PM
To display the photo frame on the wall

PNotes

Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. Remove the stand when you hang the photo frame on the wall. Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet. We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc. Tighten the screws firmly to avoid the photo frame from falling. Be careful not to step on the screws or hanging unit.
Attach the supplied hanging unit on the wall to the rear panel of the photo frame with the supplied four screws.
Hanging unit on the wall (supplied)

Screws (supplied)

Prepare screws (not supplied) suitable for the screw holes on the rear panel.
4 mm (3/16 inch) More than 25 mm (1 inch) 4.2 mm (3/16 inch) 8.6 mm (11/32 inch) Holes on the rear panel
Screw the screws (not supplied) into the wall.
Be sure the screws (not supplied) protrude between 2.5 mm to 3 mm (1/8 inch) from the surface of the wall.
Between 2.5 mm to 3 mm (1/8 inch)
Hang the photo frame on the wall by fitting the hole on the rear panel to the screws on the wall.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\040C02.fm Master: Left 010COV.book Page 12 Wednesday, August 25, 2010 12:06 PM

Fast forward/backward playback
Press B/b during playback of the video file. When you press during fast forward/backward playback, normal playback resumes at that point. Depending on the video file, fast forward/backward playback may not be available with the photo frame.

To stop playback

Press BACK while the video file is being played.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Left 010COV.book Page 18 Wednesday, August 25, 2010 12:06 PM

z Tips

To clear the selection, select the file to be cleared then press. The check mark () next to the selected file disappears. To delete a music file imported to internal memory, select [Delete BGM] on the [Slideshow Settings] screen in step 2 then press. Press v/V to select the music file you want to delete from the music file list and press. A check mark will be displayed next to the selected file. Press MENU then press when the confirmation screen appears. The file will be deleted from the music file list.
Playing a slideshow with background music

Importing a music file

Insert a memory card that contains a music file into the photo frame. Press MENU, then select the [Slideshow Settings] tab with B/b. Press v/V to select [Import BGM] and press.
Playback of the imported music file is enabled only as BGM on a slideshow. Only music files imported to internal memory can be played as BGM. Up to 40 music files can be imported to internal memory of the photo frame.
Press v/V to select the memory card inserted in step 1. Select a music file you want to import from the music file list with v/V and press.
A check mark () is displayed next to the selected file.
Repeat step 5 when you want to select two or more files. Press MENU after you finish selecting the music file(s). Press when the confirmation screen is displayed.
The selected music file is imported to internal memory of the photo frame.
Selecting a music file to play
Press MENU, then select the [Slideshow Settings] tab with B/b. Press v/V to select [Select BGM] and press.
Select a music file you want to play from the imported music file list with v/V and press.
Repeat step 3 if you want to select two or more music files. Press MENU.
When you select (Slideshow) on the view mode screen, the music file with a check mark () is played.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Right 010COV.book Page 19 Wednesday, August 25, 2010 12:06 PM
Playing background music with a slideshow
Playback of a music file with copyright protection is not available.
Press MENU then B/b to select the [Slideshow Settings] tab. Press v/V to select [Sound Settings] and press.
Press v/V to select [Sound for Photos] or [Sound for Videos] then press. Make the BGM setting.

Sound for Photos [BGM ON]: Background music is played while a slideshow of photos is run. [BGM OFF]: Background music is not played while a slideshow of photos is run. Sound for Videos [BGM]: Background music is played while a slideshow of a video file is run. [Video sound]: Audio recorded in a video file is played while a slideshow of a video file is run. [OFF]: No audio is played while a slideshow of a video file is run.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left.L0 010COV.book Page 20 Wednesday, August 25, 2010 12:06 PM

z Tips x Importing

The number of images to be saved in the internal memory: Resize: approx. 4,000 images. Original: the number of images may vary, depending on the original image file size.

Various functions

Importing an image (a memory card b internal memory) Exporting an image (internal memory b a memory card) Deleting an image Marking an image

x Exporting

Any memory card that is not recognized by this photo frame is shown in gray and you cannot select it.
When a desired image is displayed, press MENU then B/b to select the (Editing) tab. Press v/V to select the desired menu item (Import/ Export/Delete/Marking), and press. Press v/V to select [. this image], [. multiple images] or [. all images], and press.
( stands for each command: Import, Export, Delete, or Mark.) [. this image]: Press v/V to select the destination, and press.

P Notes x Importing

Importing video files to internal memory using the buttons on the photo frame is not available. To import a video file, connect a computer to the photo frame and copy a video file on the computer to internal memory on the photo frame. For details, see Connecting to a computer (page 30).
x During exporting/deleting
Avoid doing the following. Doing so may damage this photo frame, memory card, or the data: Turning off the power Removing a memory card Inserting another card
[. multiple images]: Press B/b/v/V to select a desired image in the image list, and press to add. Repeat this operation to select multiple images.

x When deleting

If deletion has started, the deleted image cannot be recovered even if you stop deletion.

x When marking

Only marks attached to images on the internal memory are saved. Marks attached to images on a memory card will be removed when you turn the power off or change playback devices.
To clear the selection: Select the image and press. disappears from the image. After you finish selecting the images, press MENU and select the destination. [. all images]: All the images are displayed with. Press MENU and select the destination.
when the confirmation screen is displayed.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right 010COV.book Page 21 Wednesday, August 25, 2010 12:06 PM
Sorting images (Filtering)
Press SORT when an image is displayed on the screen. Select a sort style using v/V and press.
When using the buttons on the photo frame, press MENU, select the (Editing) tab with B/b, select [Sort] with v/V, and press.

P Notes

During Clock and Calendar display, you cannot select the (Editing) tab. Video files are not selected when you sort images using [Sort by event] as the shooting dates cannot be obtained for video files. They will be sorted by [No shooting date].

PNotes x During sorting

[Sort by event]: Filters by type of event. [Sort by folder]: Filters by folder. [Sort by vertical/horizontal]: Filters by image orientation. [Sort by mark]: Filters by mark. [Sort by videos/photos]: Filters according to files that contain videos or photos.
Avoid doing the following. Doing so may damage this unit, memory card, or the data: Turning off the power Removing an memory card Inserting another card
x Sort is automatically cancelled
Press v/V to select the item you want, then press Repeat step 3 then press MENU when sorting is finished.
When the playback device is changed. When images on a memory card are sorted and the memory card is removed.

To cancel the sort

Press MENU while the sorted images are displayed, select [Exit sort (show all photos)] and press.

To change the sort style

Press BACK while the sorted images are displayed then select [Reselect].
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 22 Wednesday, August 25, 2010 12:06 PM
Specifying the playback device
zTip x What is playback device?

3 Press v/V to select [Enable] ,. 4 [Auto ON time]/ [Auto OFF time] setting

v/V: Set the time.

AM or PM is displayed when you select [12 hours] on the time display setting. 5 [Auto ON day] / [Auto OFF day] setting v/V: Add a check mark to select the day on which you want to activate the timer. Move the cursor to [OK], and press.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 24 Wednesday, August 25, 2010 12:06 PM

[Advanced]

1 Press v to select [Time Setting] ,. 2 Press B/b/v/V to select the day of the week or a time zone*
for which you want to set or cancel the auto power on/off setting, then press to change the color of the time zone. * You can set a time zone by one hour units. Blue time zone: Power ON status Gray time zone: Power OFF status 3 Press B/b/v/V to select [OK]. [Auto off]
1Press v to select [Time Setting] ,
2Press v/V to select [2 hours] or [4 hours] ,

Using the alarm function

You can use the photo frame as an alarm clock. An alarm will sound and an alarm screen will be displayed to notify you when the specified alarm time on the specified day of the week arrives.

Set the alarm timer.

1 Press v/V to select [ON/OFF] , 2 Press v/V to select [ON] ,.

Set the alarm time.

1 Press v/V to select [Time] ,
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right 010COV.book Page 25 Wednesday, August 25, 2010 12:06 PM
2 Press v/V to select the time ,

Set the day of the week.

1 Press v/V to select [Day] ,. 2 Press v/V to select the day of the week , [OK].

Set the alarm sound.

1 Press v/V to select [Alarm sound] ,. 2 Press v/V to select a desired music file from the list ,

Set the alarm volume.

1 Press v/V to select [Alarm volume] ,. 2 Press v/V to select the volume (1 to 7) ,

Changing the settings

Press MENU, then B/b to select the (Settings) tab.
Depending on the status of the photo frame, some settings of some items cannot be changed. They are displayed in gray and cannot be selected. During Clock and Calendar display, you can make settings in the (Settings) tab only.

Press v/V to select the item and setting value, then press.
Setting items Picture mode Alarm Settings Auto Power ON/OFF Date/time Settings General Settings (Listing Order, Sony logo ON/OFF, etc.) Language Setting Initialize
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 26 Wednesday, August 25, 2010 12:06 PM
Perform firmware update or system initialization of the photo frame in the following cases:

Maintenance mode

Activating maintenance mode

Firmware update:

Firmware update allows you to obtain optimum performance and use the photo frame with upgraded functions.
Confirm that the photo frame is turned off. Press while holding down VIEW MODE on the photo frame to turn it on.
Hold down VIEW MODE until the following screen appears.

System initialization:

When your photo frame does not start properly, initialize the system of the photo frame. If the symptom persists, consult with your Sony dealer.
Maintenance mode is activated.
Press v/V to select [Update firmware ] or [Initialize system] and press.
Update firmware: For detailed information on how to obtain an update file or how to update the firmware, access and view http://www.sony.net/ DPF. Initialize system: The operation screen is displayed. Go to Initializing the system below.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right 010COV.book Page 27 Wednesday, August 25, 2010 12:06 PM

Initializing the system

Press B/b to select [Yes] in the System initialization screen and press.
It may take about 1 minute for the system to start for the first time after initialization. When system initialization has been executed, menu settings and mark information will be deleted, although the image and music data stored in internal memory of the photo frame will not be deleted.
When a completion message appears, press 1 (on/ standby) on the photo frame to turn it off.
Press the reset switch on the rear panel of the photo frame using a small, thin object, etc. Press 1 (on/standby) on the photo frame to turn it on.
The system of the photo frame starts.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Left 010COV.book Page 28 Wednesday, August 25, 2010 12:06 PM

Connecting to a high-definition TV (DPF-XR100 only)
Depending on the original images, high-definition display may not be possible. Use an HDMI cable that is less than 3 meters long. Use an HDMI cable with the HDMI logo. Connection to a TV input except for an HDMI input using a conversion/adaptor cable or connector is not guaranteed. Operation is not guaranteed with all TVs. If you connect a TV, the LCD screen of the photo frame turns off. If the photo frame is connected to a TV with an HDMI cable, audio, operating sound and alarm will be output from the TV, not from the photo frame. Adjust the volume on the TV. If [Control for HDMI] is set to off in the TV settings, the input is not changed automatically. If you are using a TV that does not support HDMI control or the input is not switched automatically, change the TVs input manually. The method used for changing the input differs depending on the TV. Refer to the operating instructions supplied with the TV.
The photo frame is capable of HDMI output. If you connect the photo frame to a TV with an HDMI input, you can display images in higher definition on the TV.

About PhotoTV HD

The photo frame supports PhotoTV HD. PhotoTV HD is a function for expressing subtle textures and color tones in high definition, giving the appearance of real photos. You can combine Sony devices that support PhotoTV HD together to enjoy photos at beautiful full HD quality.
Connect the AC power adaptor to the photo frame and connect the AC power adaptor to an AC outlet Connect the HDMI OUT connector (A type connector) of the photo frame and the HDMI IN connector of the TV.

High-definition TV

To HDMI IN connector
Turn on the photo frame. Change the input of the TV.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right 010COV.book Page 29 Wednesday, August 25, 2010 12:06 PM
Operating an external device connected to the photo frame
You can connect a mass-storage-compatible digital camera, USB memory device, photo storage device, or other external device to the photo frame and display an image directly from the external device.
We cannot guarantee connection with all types of external devices. The playback device will be switched to the external device if you connect the external device to the USB A connector during playback of the image in the internal memory. When using a commercially available USB cable, use an AType USB cable that is less than 3 meters long. Use a USB cable with the USB logo. Do not disconnect the USB cable or turn the photo frame and external device off while the access lamp on the external device is flashing. Doing so may damage the data stored in the external device. Sony assumes no responsibility for any damage or loss of data. A USB hub or USB device with a built-in USB hub may not work properly. The photo frame cannot use data that has been encrypted or compressed using, for instance, fingerprint authentication or a password.

Precautions

Installation
Avoid placing the photo frame in a location subject to: vibration humidity excessive dust direct sunlight extremely high or low temperatures Do not use electrical equipment near the photo frame. The photo frame will not work properly in electromagnetic fields. Do not place heavy objects on the photo frame.

On transport

When you transport the photo frame, remove the memory card, AC adaptor, and connected cables from the photo frame and put the photo frame and its peripherals in the original box with the protective packaging. If you no longer have the original box and packing parts, use similar packing material so that the photo frame will not be damaged while being transported.

Cleaning

Clean the photo frame with a soft dry cloth. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

On the AC adaptor

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Be sure to use the AC adaptor supplied with the photo frame. Do not use other AC adaptors, as this may cause a malfunction. Do not use the supplied AC adaptor for other devices. Do not use an electrical transformer (travel converter), as this may cause overheating or a malfunction. In case the cord of the AC adaptor is damaged, do not use it any longer, as this may be dangerous.
Restrictions on duplication
TV programs, films, video tapes, portraits of other people, or other materials may be copyrighted. Unauthorized use of such materials may infringe the provisions of the copyright law.
Disposing of the photo frame
Even if you perform [Format internal memory], the data in the internal memory may not be erased completely. When you dispose of the photo frame, we recommend that you physically destroy the photo frame.

On moisture condensation

If the photo frame is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the photo frame will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC adaptor of the photo frame and do not use the photo frame for at least one hour.

Maximum number of files that can be handled 9,999 files for the internal memory or for a memory card Internal memory capacity*GB (Approx. 4,000 images*7 can be saved.) Power requirements DC IN jack, DC 9V Power consumption DPF-XR100 [With the AC adaptor] At the maximum load: 13 W, normal mode*: 7.8 W [Without the AC adaptor] At the maximum load: 10.8 W DPF-VR100 [With the AC adaptor] At the maximum load: 10.7 W, normal mode*: 5.2 W [Without the AC adaptor] At the maximum load: 8.9 W
* The definition of the normal mode is a status which allows the performance of a slideshow using images stored in the internal memory with the default settings without inserting a memory card or connecting an external device.

x AC adaptor

Power requirements - 100 V to 240 V, 50 Hz/60 Hz 0.5 A Rated output voltage 9 V, 1.4 A Dimensions (depth/width/height) Approx. 34 mm 79 mm 65 mm (1 3/1/5/8) inches (excluding the protruding parts) Mass Approx. 110 g (3 7/8 oz) See the label of AC adaptor for more details. Design and specifications are subject to change without notice.
Operating temperature 5 C to 35 C (41 F to 95 F) Dimensions (width/height/depth) [With the stand spread out] Approx. 280 mm 191 mm 124.5 mm (11 1/5/8 5) inches [When the photo frame is hanging on the wall]
: Some of the files may not be compatible depending on the type of data. *2: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format *3 : RAW files of a Sony camera are displayed as thumbnail preview. *4 : Files with copyright protection cannot be played. *5 : Frames may be dropped during playback of a memory card due to the kinds of data or transfer rate of the memory card. *6 : When measuring media capacity, 1 GB equals 1,000,000,000 bytes, a portion of which is used for data management and/or application files. The capacity that a user can use is approximately 1.6 GB. *7 : Approximate number is shown when the images taken by 2,000,000 pixels equivalent camera are saved. The value may vary depending on the shooting condition.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Right 010COV.book Page 37 Wednesday, August 25, 2010 12:06 PM
Customer support home page
The latest support information is available at the following home page address: http://www.sony.net/
All other companies and product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual. Notes on the License

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii)DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
On trademarks and copyrights
, BRAVIA, PhotoTV HD Cyber-shot, , , Memory Stick, , Memory Stick Duo, , MagicGate Memory Stick, Memory Stick PRO, , Memory Stick PRO Duo, , Memory Stick PRO-HG Duo, , Memory Stick Micro, , , Memory Stick-ROM, , MagicGate, and are trademarks or registered trademarks of Sony Corporation. HDMI, HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States and/or other countries. CompactFlash is a trademark of SanDisk Corporation in the U.S.A. or xD-Picture CardTM is a trademark of FUJIFILM Corporation. SD Logo, SDHC Logo, SDXC Logo are trademarks of SD-3C, LLC.
Contains iTypeTM and fonts from Monotype Imaging Inc. iTypeTM is a trademark of Monotype Imaging Inc. Dolby is a trademark of Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\080ADD.fm Master: Left 010COV.book Page 38 Wednesday, August 25, 2010 12:06 PM