Trade Name: Model No.: Responsible Party: Address: SONY DPF-V800 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For the Customer in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc) again.

Continued

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e.marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Duplication, edition, or printing of a CD, TV programs, copyrighted materials such as pictures or publications, or any other materials except for your own recording or creation is limited to private or domestic use only. Unless you hold copyright or have permission of copyright holders for the materials to be duplicated, use of those materials beyond this limit may infringe the provisions of the copyright law and be subject to the copyright holders claim for damages. When using photo images with this digital photo frame, pay special attention not to infringe the provisions of the copyright law. Any unauthorized use or modification of theres portrait may also infringe their rights. For some demonstrations, performances, or exhibits, photography may be forbidden.

is a trademark of FotoNation Inc. in the U.S.A.
is a trademark of Ichikawa Soft Laboratory. Contains iTypeTM and fonts from Monotype Imaging Inc. iTypeTM is a trademark of Monotype Imaging Inc. All other companies and product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual. This unit is equipped with face recognition feature. Sony Face Recognition technology developed by Sony is used.
On trademarks and copyrights
, BRAVIA, BRAVIA Sync, , , Cyber-shot, , Memory , Memory Stick Duo, , MagicGate Memory Stick, Memory Stick PRO, , Memory Stick PRO Duo, , Memory Stick PRO-HG Duo, , Memory Stick Micro, , , Memory StickROM, , MagicGate, and are trademarks or registered trademarks of Sony Corporation. HDMI, , and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are registered trademarks of Apple Inc. in the United States and/or other countries. CompactFlash is a trademark of SanDisk Corporation in the U.S.A. PhotoTV HD, Stick, or xD-Picture Card is a trademark of FUJIFILM Corporation.

Notice for users

Program 2009 Sony Corporation Documentation 2009 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. Any design data such as sample pictures provided in this software cannot be modified or duplicated except for the purpose of personal use. Any unauthorized duplication of this software is prohibited under copyright law. Please note that unauthorized duplication or modification of portraits or copyrighted work could infringe the rights reserved by rights holders.
On the illustrations and screen shots used in this manual
The illustrations and screen shots used in this manual are of the DPF-X1000 unless noted otherwise.

Table of Contents

Enjoying your photo frame in various ways..9 Features..10 Checking included items..12 Identifying the parts..12
Preparing the remote control.16 Setting the stand.17 To display the photo frame on the wall...18 Connecting to the AC power source..19 Turning the photo frame on..23 Setting the current time.24 Inserting a memory card.25 Changing the display..26 Slideshow display..28 Clock and calendar display.30 Single view mode..31 Index image display..32
Enjoying a slideshow..34 Changing the settings of the slideshow..34 Refresh mode.37
Adding images to the internal memory..37 Exporting an image..39 Deleting an image..41 Registering a mark..42 Searching for an image (Filtering)..44 Specifying the playback device..45 Auto Touch-up..45 Adjusting the image size and position..47 Enlarging/reducing an image. 47 Rotating an image. 47 Using the CreativeEdit function..48 Making a Scrapbook.. 48 Making a Calendar.. 51 Superimposing a message on an image.. 53 Adding a frame. 55 Making layout panels. 55 Changing the settings of the auto power on/off function.56 Using the alarm function.57 Setting the alarm.. 57 Setting the time to be alarmed. 58 Changing the settings.58 Setting procedure.. 58 Items to set. 60 Connecting to a high definition TV to view images..63 Connecting to a high definition TV.. 63 Operating an external device connected to the photo frame.66
Connecting to a Bluetooth device..67
Notes on using a memory card.81 Specifications.82 Index..85
Connecting to a computer.69 System requirements. 69 Connecting to a computer to exchange images.. 69 Disconnecting your computer. 70
If an error message appears.71

If trouble occurs..73

Precautions..78 Safety.. 78 Installation.. 78 Cleaning.. 78 Restrictions on duplication. 79 About memory cards..79 Memory Stick.. 79 SD memory card.. 80 xD-Picture Card.. 80 CompactFlash card. 80
Enjoying your photo frame in various ways
The Sony DPF-X800/X1000, DPF-V800/V1000 is a digital photo frame for easily displaying images taken with a digital camera or other device, without using a computer.

Features

x Support for various memory cards* Supports various memory cards and other devices, such as a Memory Stick, CompactFlash card, SD memory card, xDPicture Card, and USB memory. Just insert a memory card removed from a digital camera or other device, and you will be able to view the images immediately. (.page 25, 66)
x Various modes The displayed image can be switched automatically as though you are turning the pages of an album yourself. You can select from various modes, including just images, a clock, or calendar view. You can also change playback settings such as the playback order. (.page 34)
x Adding images to internal memory The images you add to the album are saved in internal memory. (.page 37)
x Various display functions You can enjoy various viewing modes, such as the slideshow display, Clock and calendar display, Single view mode, and Index image display. (.page 26)

Exporting an image

You can export the images in the internal memory to a memory card or external device.
Notes Images in the internal memory cannot be added to the album. Do not turn off the power, remove the memory card, or disconnect the external device while an image is being added. Doing so may damage the photo frame or memory card, or damage the data. Tips To perform this operation using the remote control, press the MENU button on the remote control and then press v/V to select [Add to album] from (Editing) and then press. You can also use the MENU button on the photo frame. You can change the thumbnail size using [ / ] in the image list. Due to one of the characteristics of the internal memory device, images stored for long time or read many times may be subject to data error when read too often. We recommend that you perform a backup of your data periodically to avoid losing it.
Press MENU when an image stored on the internal device is displayed on the screen.
Press B/b to select the tab.

(Editing)

The screen used for editing is displayed.
Press v/V to select [Export] and then press.
The Export menu is displayed. Single image display
Press v/V to select [Export this image], [Selected images] or [Export all images] and then press.
If you select [Export this image], the image currently displayed is exported to the device. Go to step 6. (This item cannot be selected on the slideshow display.) If you select [Selected images], you can select the image you want to export from the image list. Go to step 5. If you select [Export all images], the image list is displayed. A check mark is attached to the check box of all the images. Go to step 6.
Specify the image to export from the image list.
About the image list During a search: Displays all the images applicable to the criteria used for the search. Other than during a search: Displays the image list of the album on the screen. Refer to Searching for an image (Filtering) (page 44). 1 Press B/b/v/V to select the image you want to export and then press.A check mark will be attached to the check box of each selected image. Repeat this operation to export multiple images at the same time. To cancel the selection, select images to cancel and then press to delete the check mark in the check box. 2 Press MENU. The screen used for selecting the device to which to export is displayed.

The mark is attached to the selected image.
To delete the registration of a mark
Select [Unmark this image] or [Unmark all images] and then press in step 5. You can also cancel the selection when you remove the check mark from the check box. [Unmark this image]: Removes a mark from the image currently displayed. (This item cannot be selected on the slideshow display.)

Searching for an image

(Filtering)
You can search for an image which is stored in internal memory or on a memory card. You can filter an image using various criteria, such as the event, the folder in which the image is saved, the orientation of the image or mark, etc.
To cancel the search for an image
Press the MENU button when an image is displayed on the screen and then select [Exit search (show all photo)].
To change the criteria for a search
Press the BACK button when an image you searched for is displayed on the screen.
Notes Do not turn off the power, remove the memory card, or disconnect the external device during a searching. Doing so may damage the photo frame or memory card, or damage the data. The search is cancelled automatically in the following cases. When you change the playback device When you search for an image which is stored on a memory card or external device and then remove that memory card or external device Tip You can also use the MENU button on the photo frame.
Note You cannot select the (Editing) tab when the clock and calendar are displayed.
Press v/V to select [Search] and then press. Press v/V to select the criteria you want and then press.
[Search by event]: Filters by the event. [Search by folder]: Filters by the folder. [Search by vertical/horizontal]: Filters by the image orientation. [Search by mark]: Filters by the mark.
Press v/V to select the item you want and then press.
Specifying the playback device
You can specify the memory card or external device to be displayed.

Auto Touch-up

What is Auto Touch-up?
Auto Touch-up is a feature for performing the following six corrections automatically at the same time. Refer to page 60 for details on each level.

Red-eye Correction: Automatically corrects red-eye caused by the flash. Exposure Correction: Adjusts the brightness by using the face detect function. Focus Correction: Improves the focus of an out-offocus image to create a better-focused image. WB Correction: Corrects a color which is reddish or bluish due to the light source at the time the photo was taken (lighting), to a color suitable for that light source. Auto Dodging: Brightens the portion which is dark, automatically. Keeps the brightness of the portion which is bright. Skin Smoothing: Automatically recognizes face parts, and adjusts the skin tone for a smoother look.
Press B/b to select the device) tab.

(Select

The screen used for selecting a device is displayed.
Tip Insert the device at this point during the procedure if the device you want to use cannot be selected.
Display the image you want to correct as single image display. Press Auto Touch-up.
Correction of the selected image begins, and then the image before correction appears on the left, and the corrected image appears on the right.
Press v/V to select the device you want to display and then press.
The images of the selected device are displayed.
Tips You can also use the MENU button on the photo frame. The search is cancelled automatically when you change the playback device during a search.
Press v/V to select [Save] and then press.
The corrected image is saved as a new image.
Press v/V to select the method used to save the image.
If you select [Save as new image], the image is saved as a new image. When you select [Overwrite], the image is overwritten. A confirmation screen is displayed when you select [Overwrite]. Go to step 7.
Tips The original image is the same as it was before correction. The corrected image is saved on the same device as the image before correction. To perform this operation from the menu, press MENU on the remote control and then press v/V to select [Auto Touch-up] from (Editing) and then press. The automatic red-eye correction of this photo frame uses the technology of FotoNation Inc. in the U.S.A.
Press v/V to select the device which will be used to save the corrected image and then press.

The skin smoothing correction of the photo frame uses the technology of Ichikawa Soft Laboratory.
Press v/V to select the folder you want and then press.
The confirmation screen used to decide whether to save an image or not is displayed.

The image is saved.

Press when the confirmation screen is displayed after saving is finished.
To return to the original image (image before correction) Select [Cancel] and then press in step 2.
Notes The effect of the Auto Touch-up function may not appear on the corrected images, depending on the images. Depending on the image, it may take a while for the correction.
Adjusting the image size and position
Enlarging/reducing an image
You can enlarge or reduce an image in single view mode.

Rotating an image

Press ROTATE ( control. ) on the remote
Each press of the button rotates the image 90 degrees counter-clockwise.
Operate from the menu of the photo frame
To enlarge an image, press (zoom in) on the remote control. To reduce an enlarged image, press (zoom out).
Each press of the button enlarges the image further. You can enlarge an image to a maximum of 5 times the original scale. You can move an enlarged image up, down, left, and right.
Press MENU in single display mode.
(Editing) Advanced operations
Press v/V to select [Rotate] and then press.
The Rotate menu is displayed.
About crop and save The screen currently displayed is saved as it was trimmed after you press B/b/v/V to move the enlarged image and then press the MENU button. You can select [Save as new image] or [Overwrite] by pressing the MENU button when the image is enlarged or reduced. Press v/V to select the method used to save the image. If you select [Save as new image], the image is saved as a new image. If you select [Overwrite], the image is overwritten. A confirmation screen is displayed when you select [Overwrite]. Go to step 4 on page 46.
Notes Enlarging an image may reduce the quality depending on the image size. It is not possible to enlarge an image using the buttons on the photo frame.
Press v/V to select the direction to rotate and then press.
: Rotates the image 90 degrees clockwise. : Rotates the image 90 degrees counterclockwise.
Press v/V to select [OK] and then press.
Note An enlarged image cannot be rotated.
Tips The information used to rotate the image is retained even after the power is turned off. You can rotate the image of the index image display.
Using the CreativeEdit function

You can enjoy decorated images using the CreativeEdit function.
Press v/V to select [CreativeEdit] and then press.
The screen used for CreativeEdit is displayed.

Making a Scrapbook

From the CreativeEdit menu, press B/b/v/V to select (Scrapbook) and then press.
The window for selecting a theme is displayed.
Press B/b/v/V to select the desired theme, then press.
The window used for selecting templates of the selected theme is displayed.
Press B/b/v/V to select the desired template, then press.
A preview of the selected template is displayed.

Select an image.

When you select a template with multiple images, repeat the procedures below to select an image for each area.

Image area

Items /
Procedures Increases or reduces the size of an image when the buttons are pressed. Move the image with B/b/ v/V, and then press. Each time you press the image rotates 90 clockwise. Automatically adjusts a failed photo having problems such as being backlit, out-of-focus, or showing the red-eye phenomenon, when the button is selected. (page 60) ,
1 Press B/b/v/V to select an image area,
then press. The index view is displayed. 2 Press B/b/v/V to select the desired image, then press. The window used for adjusting the image is displayed.
Press B/b to select press.

and then

Adjust the image size, position or others of the selected image.
Press B/b to select the desired adjustment item, then press.

Adjustment tools

The selected image is added to the image area. To add an image for another image area, repeat steps 4 and 5. To superimpose characters or stamps on the image, proceed with step 7.
Superimpose characters or stamps.
Press v/V to select the desired setting such as stamp or characters, and then press. Items Procedures Displays the keyboard to input alphanumeric characters.
Procedures Select the desired stamp with B/b/v/V, and then press. Saves the edited image on a memory card, external device, or in internal memory. Finishes the making Scrapbook.
x Superimposing characters 1 Press v/V to select [Keyboard] after selecting (Text) using B/b, and then press. The keyboard is displayed.

x Superimposing a stamp 1 Press B/b to select (Stamp) and then press. The window used for selecting a stamp is displayed. 2 Press B/b/v/V to select a desired stamp and then press. The selected stamp is displayed in the center of the image preview screen. 3 Press B/b/v/V to adjust the position of the stamp and then press. The stamp is superimposed on the image. To add the same stamp Press. The same stamp is added to the image. Adjust its size and position. Until you press the BACK button, the same stamp is superimposed. To add another stamp Press the BACK button twice to display the window used for selecting a stamp. Repeat steps 2 and 3 to select and adjust the desired stamp. To adjust the stamp size or flip a stamp Press the BACK button to display the window in step 6. To adjust the stamp size, press / on the remote control. To flip the stamp, press B/b/v/V to select and then press. The adjustments here are reflected on the next stamp.

2 Input characters.

Press B/b/v/V to select the desired character and then press. The selected characters are input in the character input box. You can enter up to 50 characters. To change the character or symbol Select [A/a/@] and then press. Each time you press , the input mode switches between capital letters, small letters, and symbols. To delete a character Press B/b/v/V to select [B] or [b] in the character input box. Press repeatedly until the cursor in the character input box moves just behind the character that you want to delete. Then press B/b/v/V to select [Delete] and then press. Each time you press , the character before the cursor is deleted.
Tip You can display the history of characters you have entered previously, and use it using v/V on the keyboard while entering a character.

3 Select a font.

Press B/b/v/V to select [FONT] and then press repeatedly until the desired font appears. You can select from 5 fonts: Gothic, rounded Gothic, Italic, rounded Italic, and hand-writing-style.

Making a Calendar

From the CreativeEdit menu (page 48), press B/b/v/V to select (Calendar) and then press.
The window used for selecting the calendar template, is displayed.
Press B/b/v/V to select the desired template, and then press.

Image area Calendar area

Note You cannot specify multiple fonts for a sequence of characters input. All the lines of characters are input in the identical font. You can change the font in the middle of input procedures; the changed font will be applied to all the input characters. 4 Select a color.
Press B/b/v/V to select [OK] and then press. The color selection window is displayed. Press B/b/v/V to select the desired color and then press. The color selection window is closed and the image preview with input characters is displayed. Pressing saves the input characters in the memory. You can register a maximum of 16 characters. 5 Adjust the input characters. Press B/b/v/V to select the desired adjustment item, press , and then adjust the size and position of the characters. For how to adjust an image, see step 5 on page 49.

When you select a template with multiple images, select an image for each area. For how to select an image, see step 4 on page 49. When you select image(s), the window used for adjusting the image is displayed. To superimpose a stamp or characters, see page 50.
Tip You can select and set an image area or calendar area in any order.

Adjust the image.

For how to adjust an image, see step 5 on page 49. When you adjust an image, the image is added to the image area.
Set the calendar. 1 Press B/b/v/V to select the calendar
area and press. The calendar setting window is displayed.

Settings/Procedures

2 Press B/b/v/V to select a
desired stamp, and press.
The calendar is displayed.
3 Press B/b/v/V to select a 2 Press v/V to select the item that you
want to set, and then press Item Start Y/M
Settings/Procedures Set the first month and the year starting the calendar. Press B/b to select the month or year and press v/V to set the number. Press. Set the day of the week (placed furthest left in the calendar). Press v/V to select Sunday or Monday. Then press.
desired date to which to add the stamp and press. When you want to change the stamp type, select the BACK button and then repeat steps 2 and 3.

Start Day

4 Press v/V to select
Date color Set the color of Saturday, Sunday and holiday to be displayed in the calendar. Press b and then v/V to select the desired color for Sunday and Saturday. Then press. Modify Calendar You can add a stamp or desired color to a specific day in the calendar. When adding a stamp (Example) 1 Press B/b to select (Stamp), and press. The stamp selection window is displayed.
and press. To exit Modify Calendar and return to the Calendar setting window, press B/b to select and press. You can set Date color using similar procedures. The calendar is displayed in the calendar area.
Superimposing a message on an image
Tip To superimpose handwritten characters or an illustration, draw them with a black ink pen on a sheet of white paper, shoot them with a digital camera, and save the image on a memory card.

Notes When saving images from a computer in the internal memory, make a folder in the internal memory and save the images in this folder. If you do not make a folder, you can only save up to 512 images. In addition, the number of images may be reduced depending on the file name length or character type. A paticular image may not be displayed in order of the shooting date on the index image display, etc as the information on the shooting date may have been changed or lost when you edited or saved that image file on a computer. When images from the computer are saved in the internal memory of the photo frame, the image files are saved without being compressed. As a result, fewer images may be able to be saved to the internal memory of the photo frame. Image files made or edited on a computer may not be displayed. Image files set to Read Only on a computer cannot be deleted on the photo frame. Cancel Read Only before saving image files from a computer on the photo frame.
If an error message appears
If an error occurs, one of the following error messages may be displayed on the LCD screen of the photo frame. Follow the corresponding solution below to solve the problem. Error message No Memory Stick. / No CompactFlash card. / No SD Memory Card. / No xD-Picture Card. / No External Device. Meaning/Solutions A memory card is not inserted in a slot. Or, an external device is not connected to the EXT INTERFACE connector. Insert a memory card in the corresponding slot. Or, connect an external device. (.pages 25, 66)
An incompatible Memory Stick is An unsupported memory card is inserted. Or, an inserted. / An incompatible unsupported external device is connected to the CompactFlash card is inserted. / An EXT INTERFACE connector. Use a memory card or incompatible SD Memory Card is external device that is supported by the photo frame. inserted. / An incompatible xDPicture Card is inserted. / An incompatible External Device is inserted. No images on file. There is no image file that can be displayed on the screen of the photo frame on the memory card or the external device. Use a memory card or on external device containing image files that can be displayed with the photo frame. To delete a protected file, cancel the protection on your digital camera. The memory card is write-protected. Slide the writeprotect switch to the enable position. (.page 80)
Cannot delete a protected image. Media is protected. Remove protection then try again.
No more data can be saved because the memory card, the The Memory Stick is full. / The CompactFlash card is full. / The SD internal memory, or the external device is full. Delete Memory Card is full. / The xDimages, or use a memory card or external device with free Picture Card is full. / The External space available. Device is full.
Error message Error reading the Memory Stick. / Error reading the CompactFlash card. / Error reading the SD Memory Card. / Error reading the xD-Picture Card. / Error reading the External Device. Write error in the Memory Stick. / Write error in the CompactFlash card. / Write error in the SD Memory Card. / Write error in the xD-Picture Card. / Write error in the External Device. The Memory Stick is read only. The Memory Stick is protected. Media format not supported.

Saving and deleting images
Symptom Cannot save an image. Check item Is the memory card writeprotected? Cause/Solutions c Cancel write-protection and try saving again.
Is the write-protect switch of c Slide the write-protect switch to the the memory card in the enable position. [LOCK] position? Is the memory card full? c Replace the memory card with one with sufficient free space. Or, delete any unwanted images. (.page 41) c Delete any unwanted images. (.page 41) c If you do not make a folder, you can only save up to 512 images. In addition, the number of images may be reduced depending on the file name length or character type. When you save images in the internal memory from a computer, be sure to make a folder in the internal memory and save the images in this folder.
Is the internal memory full? Did you save images from a computer to the internal memory without making a folder in the internal memory?
Symptom Cannot delete an image.
Check item Is the memory card writeprotected?
Cause/Solutions c Use the device you are using to cancel write-protection and try deleting again.
Is the write-protect switch of c Slide the write-protect switch to the the memory card in the enable position. [LOCK] position? Are you using a Memory Stick-ROM? Is this image protected? c It is not possible to delete an image from or format a Memory Stick-ROM. c Check the image information from the single view mode. (.page 33) c An image with a mark is set to Read Only. You cannot delete it on the photo frame. c An image cannot be recovered once it is deleted.
An image was deleted accidentally.
Connecting a digital camera or other external device
Symptom The camera is connected but nothing is displayed. Nothing happens even if the USB cable is disconnected and then re-connected. Check item Is the cable connected properly? Is the photo frame turned on? Cause/Solutions c Connect the cable properly. c Turn both the photo frame and the camera to ON. c An over current error may have occurred with the photo frame. To recover from the error, turn the power of the photo frame off and then back on. c Even if the input of the TV is not set to the photo frame, images may sometimes not be displayed on the TV screen or LCD screen if an HDMI cable is connected. c Change the input of the TV to the photo frame, or disconnect the HDMI cable and switch the display to the LCD screen.
Images are not Is the input of the TV set to displayed on the external input? TV screen or LCD screen.

: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format : RAW files are displayed as thumbnail preview. *3 : The capacity is calculated as 1 MB is equivalent to 000 bytes. The actual capacity is reduced as files for management and applications are included. Approximately 1.84 GB on DPF-X800/ X1000, approximately 840 MB on DPF-V800/ V1000 can be used for your actual operation.
: Approximate number is shown when the images taken by 000 pixels equivalent camera are saved. The value may vary depending on the shooting condition.
Customer support home page
The latest support information is available at the following home page address: http://www.sony.net/
AC adaptor 19 Accessories 12 Adding to the internal memory 37 Alarm 57, 60 Associated file 33 Auto power ON/OFF 60 Auto power on/off 56 Auto Touch-up 45
Error messages 71 Exporting an image 39 EXT INTERFACE 67
Replacing the battery of the remote control 16 Reset 62 Rotating an image 47
Features 10 Format internal memory 62
Searching for an image 44 Setting the stand 17 Single view mode 31 Slideshow display 28 Slideshow Settings 36 BGM 36 Color effect 36 Display Mode 36 Effect 36 Interval 36 Shuffle 36 Specifications 82 System Information 61 System requirements Macintosh 69 Windows 69

General Settings 61

HDMI OUT 63 High definition TV 63

Bluetooth 67

Image file size 61 Image Quality 60 Index image display 32 Initialize 62
Calendar 24 Changing the settings 58 Cleaning 78 Connecting Computer 69 External device 66 TV 63 Connecting to the AC power source 19 Control for HDMI 61 CreativeEdit 48 Calendar 51 Framed image 55 Layout print 55 Scrapbook 48 Superimposed image 53

Language setting 61

Mass storage compatible devices 66 Memory cards 79 Memory Stick 79 CompactFlash card 80 Notes on use 81 SD memory card 80 xD-Picture Card 80

Troubleshooting 73

USB cable 66 Additional information

Write-protect switch 80

Zooming an image in/out 47
Placing in portrait or landscape orientation 17 Playback device 45 Precautions 78
Date/time settings 24, 61 DC IN 8.4 V 19 Deleting an image 41 Display priority 26

Remote control 16

Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Sony Corporation

Printed in China

DPF-V1000/B

Digital Photo Frame 10.2 LCD w/ HDMI Output
Sonys DPF-V1000 Digital Photo Frame makes it easy to beautifully display up to 2,000 photos on a 10.22 WVGA resolution LCD screen. Auto Correction features help enhance image quality, and HD Output3 lets you share your photos in high definition quality on a Sony BRAVIA HDTV or other compatible HDTV. 10.2" Super Clear Photo LCD 10.2" Super Clear Photo LCD1 HDMI Output HDMI Output to HDTV Convenient Auto Image correction includes auto dodging and auto white balance correction Store photos 1GB memory (2000 photos) with search function Optional Bluetooth Bluetooth wireless ready4 (requires optional DPPA-BT1) Alarm Alarm function

Specifications

General
Action Buttons: Power; Up and Down arrows; Enter; Menu, View Mode; Back, Alarm ON/OFF Function: Delete, Zoom (-), Zoom (+), Rotate image, Auto Touch Up, Image display setting(Fit to screen/Full Image), and Placement supported(Landscape, Portrait, Auto orientation)
AC Power: AC Adaptor: AC100-240V (50Hz/60Hz) Power Type: DC8.4V, 1.7A Power Consumption (in Operation): Approx. 14.6W(Max), 10.1W(Full Screen Display mode)
Format(s) Supported: JPEG, TIFF, and BMP Playback: Still Image Playback; HDMI Slideshow with Preinstalled Music; Slideshow Playback (15 patterns);Slideshow interval setting (10 patterns); Index Playback (3 patterns); Clock & Calender Playback (14 designs). Placement supported - Landscape, Portrait, Auto orientation; Image display setting; Resume Playback; Panorama scroll playback Aspect Ratio: 15:9 Panel Type: LCD Panel size:10.2" (panel diagonal); Clear Photo LCD

Convenience Features

Remote Control: Power; Up, Down, Left and Right arrows; Enter, Menu, Back, Clock, Slideshow, View Mode, Add to Album, Index, + zoom in, - zoom out, rotation, Single, Auto Touch-up

Inputs and Outputs

USB Port(s): Type A (Hi-speed) for DPPA-BT1 and USB Mass Storage Class Device, Type B (Hi-speed) for computer

Display

Screen Size: W:222.7 x H:130.5mm Resolution: LCD Panel Resolution:WSVGA 1024 x 600 (viewing area 1000 x 600)

Dimensions

Weight: Approx. 1200g (without AC adaptor) Measurements: Photo Frame: Approx. W:306 x H:210 x D:48mm; Including Stand: Approx. W:306 x H:207 x D: 168mm

Hardware

LCD Panel Type: Panel size: Clear Photo LCD; Panel Size: 222.7 x 130.5 mm Media & Modes Supported: Memory Stick; Memory Stick Duo; Memory Stick PRO; Memory Stick PRO Duo; HighSpeed Memory Stick; HighSpeed Memory Stick Duo; Memory Stick Micro (M2)(with optional adaptor); MagicGate Memory Stick; MagicGate Memory Stick Duo; Memory Stick PRO-HG Duo(8-bit parallel transfer of Memory Stick PRO-HG Duo is not supported); SD card; mini SD card (with optional adaptor); micro SD card (with optional adaptor); SDHC card; mini SDHC card(with optional adaptor); micro SDHC card(with optional adaptor); MMC; RS-MMC; MMC Plus; Compact Flash Type I; Compact Flash Type II; Microdrive (/CompactVault); xD-picture card; xDpicture card Type M; xD-picture card Type H Output(s): HDMI System Requirements: Microsoft Windows Vista * SP1, Windows XP SP3, Windows 2000 Professional SP4, Macintosh Mac OS X (10.4 or later)

Supplied Accessories

AC adaptor Remote Control AC power cord Stand Lid

Optional Accessories

Bluetooth Adaptor DPPA-BT1 Color: Black UPC Code: 027242763357
1. Viewable area, measured diagonally. 2. Actual usable memory capacity is 848MB because a portion of memory is used for data management purposes. 3. HD viewing requires an HDMI cable (sold separately) 4. Requires use of the option DPPA-BT1 Bluetooth dongle (sold separately). 5. USB input requires optional USB cable, sold separately. 6. Some cards required an adaptor, sold separately. 2009 Sony Electronics, Inc. All rights reserved. Sony, Bionz, BRAVIA, Memory Stick, Memory Stick Duo, Memory Stick PRO, and Memory Stick PRO Duo are trademarks of Sony. HDMI is a trademark of HDMI Licensing, Inc. All other trademarks are trademarks of their respective owners. 'Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electoronic Industries Alliance(www.eiae.org).

Operating Conditions

Operating Temperature: 5 degrees C - 35 degrees C Storage Temperature: -20 degrees C - +60 degrees C

Optics/Lens

Pixels: Max pixels available to decode and print: 48 mega pixels
Please visit the Dealer Network for more information at www.sony.com/dn Last Updated: 08/04/2009
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 1.800.222.7669 www.sony.com