2-591-811-11 (1)

Prepare the battery pack

Insert the battery pack.

Turn the camera on/set the clock

Select.

Y/M/D M/D/Y D/M/Y
Insert a Memory Stick Duo

Terminal side

Digital Still Camera
Push the back part of the battery pack gently until it clicks into place.
Lift out the inlet plug and connect to the wall outlet (wall socket).
Slide the lens cover or (power). press

Lighting

Clock Set

Read This First

Operating Instructions
Before operating the unit, please read this manual and Users Guide/Troubleshooting (separate volume) thoroughly, and retain it for future reference.

2005 / 1 /

12 : 00

Battery charger

OK AM Cancel
Insert the Memory Stick Duo all the way in until it clicks.

CHARGE lamp

Light on: Charging Light off: Completed (Practical charge)
If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer. z.
Set the clock with the control button.
1 Select the date display format with v/V, then press
Select the image size for use

Select a mode.

(Image Size).

Still image:

DSC-T7
Connect the battery charger to an easily accessible wall outlet (wall socket) close by. Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). When charging is finished, disconnect the battery charger from the wall outlet (wall socket), and remove the battery pack from the battery charger. InfoLITHIUM battery pack NP-FE1 (supplied) Full charging time (Practical charging time) Approx. 170 min. (Approx. 110 min.)

AM Cancel

Select the size with v/V.

5M 3:2 3M

2 Select each item with b/B and set the numeric value

with v/V, then press z.

Select

Movie:

VGA(E-Mail) Image Size
Time required to charge fully depleted battery pack at a temperature of 25C (77F). Charging may take longer under certain circumstances or conditions.
The screen above is for still images. For movies, select [640(Fine)] (Memory Stick PRO Duo only), [640(Standard)] or [160].
3 Select [OK] with B, then press z.
Refer to Users Guide/Troubleshooting (separate volume)
Explains advanced techniques and what to do if you experience trouble with your camera.
Insert the charged battery pack.

Battery eject lever

Press (Image Size) to complete the setting.

10 : 30

To cancel, select [Cancel] and press z. Open the cover.
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.

button

Insert the battery pack while pressing the battery eject lever with the tip of the battery.

Close the cover.

2005 Sony Corporation Printed in Japan

Using the AC Adaptor

To change the date and time
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above. t Users Guide/Troubleshooting (page 53)

On still image sizes

For details on the image size t Users Guide/Troubleshooting (page 13)
Image size 5M (25921944) (Default setting) 3:2* (25921728) 3M (20481536) 1M (1280960) VGA(E-Mail) (640480) For printing in postcard size For recording a larger number of images For attaching images to e-mail or creating home pages Guidelines For printing high density images in A4 or A5 size No. of images Less Printing Fine

2591811110

Checking the accessories supplied
Battery charger BC-CS3 (1) A/V cable (1) Memory Stick Duo (32 MB) (1)
You can connect the camera using the AC-LS5/AC-LS5K AC Adaptor (not supplied). t Users Guide/Troubleshooting (page 15). Refer to the operating instructions supplied with the AC Adaptor.
To check the remaining battery time
Press (power) to turn on and check the time on the LCD screen.
Remaining indicator It takes about one minute until the correct battery remaining time appears. The displayed time remaining may not be correct under certain circumstances.

On the clock display

If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle. Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Rechargeable battery pack NP-FE1 (1) Neck strap (1) Memory Stick Duo Adaptor (1) Remaining time
When turning on the power
Unless you set the clock, the Clock Set screen appears each time the camera is turned on. The following screen appears when the camera is turned on for the second time or afterwards.
* Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards etc.
To remove the battery pack
Battery case (1) Interface Adaptor (1) CD-ROM (Cyber-shot application software) (1) Operating instructions for digital still camera Read This First (this manual) (1) USB cable (1) Stand (1) Operating instructions Users Guide/ Troubleshooting (1)
On recordable number of still images and recordable time of movies
Recordable number of still images and recordable time of movies vary depending on the image size selected.
Open the battery cover and slide the battery eject lever in the direction of the arrow. Place your finger on the flange and push the battery pack out. To avoid dropping the battery pack, do not hold the camera with the battery slot facing down when the battery eject lever is out.
When opening the lens cover
If you open the lens cover too quickly, the camera might not turn on. If this happens, close the cover and then open it again more slowly. When opening the lens cover, be careful not to touch the lens.
For details on recordable number or time t Users Guide/Troubleshooting (page 22)
Still images Maximum recordable image Movies Maximum recordable time
To use your camera abroad Power sources Notes before use
Charge the supplied NP-FE1 battery pack before using the camera for the first time. The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. Hook Avoid letting the stopper on the neck strap (for length adjustment) hit or rub against the LCD screen. This may damage the camera.

To turn off the power

Slide the lens cover or press again.
If the camera is running on battery power and you do not operate the camera for a period of time, the camera turns off automatically to prevent wearing down the battery (Auto power-off function).

Number of recordable images and time can differ according to shooting conditions.
You can use your camera, the supplied battery charger, and the AC-LS5/AC-LS5K AC Adaptor (not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/ 60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
BC-CS3 Do not use an electronic transformer (travel converter), as this may cause a malfunction.
To remove a Memory Stick Duo
Open the cover, then push the Memory Stick Duo in once.
If the access lamp is lit, never remove the Memory Stick Duo or turn off the power. The data may be corrupted.
Changing the language setting
You can change the screen display to show messages in a specified language. To change the language setting, press MENU to display the menu screen. Select (Setup) with the control button, then, select [ A Language] in (Setup1), and select the desired language. t Users 1 Guide/Troubleshooting (page 51)

Access lamp

Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.

http://www.sony.net/

continued on the reverse
Shoot images easily (Auto adjustment mode)
Shoot still images (Scene Selection)
Shoot with the shutter button.

View/delete images

Holding the camera
Press fully down The shutter sounds.

Press MENU.

Program Auto Camera
Select an image with b/B.
Still image (auto adjustment mode):
Press and hold halfway down to focus AE/AF lock indicator Flashing t lit/beeps

101-0003

BACK/NEXT

1 10:30PM

VOLUME
Select (Camera) with b, then select a mode with v/V.

Zoom lever

WB ISO
Still image: the image size is displayed Movie: is displayed
Hold the camera with your thumb on the strap hook Position the subject in the center of the focus frame.

AF range finder frame

To play back a movie, press z.
Press fully down Zoom lever

10/10 00:00:03

MENU button Control button
For details on modes, see below. The setting is maintained even when the power is turned off.

101_0010

REV/CUE

Playback bar

Control button
Press MENU to turn off the menu. Shoot with the shutter button.

Rewind/Fast forward: b/B (Return to normal playback: z) Volume: v/V Stop playback: z Movies with the image size [160] are displayed a size smaller.
To stop recording, press the shutter button fully down again.

Using the control button

Using the zoom
To cancel the Scene Selection
Select [Auto] or [Program] with v/V.

To delete images

1 Display the image you want to delete and press 2 Select [Delete] with v, then press z. (delete).
Using the flash for still images
Checking the last image you shot (Quick Review)

Review

Shooting close-up (Macro)

101-0029

RETURN

Using the self-timer

You cannot change the zoom scale while shooting a movie. When the zoom scale exceeds 3, the camera uses [Digital Zoom]. For details on the [Digital Zoom] settings and the image quality t Users Guide/Troubleshooting (page 45)

To cancel the deletion

Select [Exit], then press z.

Delete Exit

Checking the last still image you shot (Quick Review)
Press b ( ) on the control button. To cancel, press b again.
The image may appear rough right after playback starts. To delete the image, press (Delete) and select [Delete] with v on the control button, then press z.
Before step 2, press V ( ) on the control button. Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates (approximately 10 seconds later).

Self-timer lamp

Scene Selection modes
The following modes are predetermined to match the scene conditions. Magnifying glass
The subject appears on the LCD screen magnified by up to 3.5. Distance to the subject 1 cm (13/32 inch) 2 cm (13/16 inch) 5 cm (2 inches) 10 cm (4 inches) 20 cm (7 7/8 inches) Magnification scale 3.5 2.2 1.1 0.5 0.3
To view an enlarged image (playback zoom)
Slide the zoom lever toward Adjust the portion: v/V/b/B Cancel playback zoom: z To store enlarged images: [Trimming] t Users Guide/Troubleshooting (page 43) while displaying a still image. Soft snap
Shoots portraits of people, flowers, etc., with a gentle atmosphere.
To undo the zoom, slide the zoom lever toward
Selecting a flash mode for still images
Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected.
No indicator Strobes if it is dark (default setting) Forced flash

Landscape

Shoots landscapes, etc., by focusing on a distant subject.

Viewing an index screen

Slide the zoom lever toward (index) and select an image with v/V/b/B. To return to the single-image screen, press z. To display the next (previous) index screen, press b/B.
Using a tripod is recommended.
If you shoot a still image of a subject that is difficult to focus on
If the subject is closer than approx. 50 cm (19 3/4 inches), use the Macro mode (left column). When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing slowly and the beep does not sound. Recompose the shot and focus again.

High-speed shutter

Shoots moving subjects outdoors or in other bright places.
Slow synchro (Forced flash) The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. No flash
The focal distance to a subject is approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches). The optical zoom is locked to the W side and cannot be used. When you slide the zoom lever, the image is enlarged using the digital zoom.
Subjects difficult to focus on are:
Shooting distance (when [ISO] is set to [Auto]) W side: Approx. 0.1 to 2.6 m (3 15/16 to 8 feet 6 3/8 inches) T side: Approx. 0.5 to 2.1 m (1 feet 7 11/16 to 6 feet 10 11/16 inches) The flash strobes twice. The first time is to adjust the light quantity. Distant from the camera and dark The contrast between the subject and its background is poor. Seen through glass Moving fast Reflect light or have a lustrous finish Flashing Against light
Shoots seasides or lakesides, the blue of the water clearly recorded.

SINGLE DISPLAY

If you slide again, the sixteen-image index screen appears.

Snow Twilight*

Shoots night scenes at a distance without losing the dark atmosphere of the surroundings. Shoots whitish scenes brightly.
To delete images in index mode
1 While an index screen is displayed, press control button, then press z. (Delete) and select [Select] with v/V on the (Delete)
Before step 2, press B ( To cancel, press B again.
Setting the zoom all the way to the W side is recommended. The in-focus range becomes narrow, and the complete subject may not entirely be in focus. The AF speed drops. To shoot at even closer distances than close-ups (Macro) recording, use (Magnifying glass mode) in the Scene mode.
To identify items on the screen
t Users Guide/Troubleshooting (page 17)

) on the control button.

Fireworks*
Fireworks are recorded in all their splendor.
2 Select the image you want to delete with v/V/b/B, then press z to display the indicator on the selected image.

To cancel a selection

Twilight portrait*
Shoots portraits in dark places.

Select an image you have previously selected for deletion, then indicator from the image. press z to delete the

SELECT TO NEXT

Candle*
Shoot candlelit scenes, without spoiling the atmosphere. * The shutter speed becomes slower, so using a tripod is recommended.
Shortest shooting distance from the lens surface
Setting all the way to the W side: Approx. 8 cm (3 1/4 inches) Setting all the way to the T side: Approx. 25 cm (9 7/8 inches)

3 Press

(Delete).
4 Select [OK] with B, then press z.
To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then press z.
To use the functions set by the control button with Scene Selection
Before shooting in step 5, select the settings with the control button. Some functions are not available, depending on the Scene Selection mode. When you press the button to select functions that cannot be combined with Scene Selection, a beep sounds. t Users Guide/ Troubleshooting (page 25)