Contents

English..3 Deutsch...17 Espaol...33 Franais...49 Italiano..65
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

!"#$..81

r fo ot N

se U al i rc me

English
Introduction 4 Preparing the car handsfree 5 Using the car handsfree 8 Troubleshooting 12 Additional information 14 Declaration of conformity 93

Sony Ericsson HCB-30

First edition (June 2002) This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. Sony Ericsson Mobile Communications AB, 2002 Publication number: LZT 108 5844/1 R1A Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service or not. The Bluetooth trademarks are owned by Bluetooth SIG, Inc. USA.

Introduction

The Bluetooth Car Handsfree HCB-30 is based on Bluetooth wireless technology. See Safe and efficient use on page 14 and Limited Warranty on page 15 before using your car handsfree. What is Bluetooth wireless technology? The Bluetooth wireless technology makes it possible to connect any compatible portable and stationary communications device within a range of 10 m (30 ft) without using cables. The technology is based on a radio link that offers fast and reliable transmission of voice and data information. It does not require a line-of-sight connection in order to establish communication. Bluetooth wireless technology uses a globally available frequency range intended to ensure communication compatibility worldwide.
How can I use my car handsfree? When you turn the ignition key of your car, the Bluetooth car handsfree is switched on automatically. The phone can be left in your coat pocket or bag while you make and answer calls via the Bluetooth car handsfree control panel. The car stereo is muted when you receive a call, and you hear the caller in a separate loudspeaker.
What products can I use with my car handsfree? With the Bluetooth Car Handsfree HCB-30, you can use a Sony Ericsson or Ericsson phone with built-in Bluetooth capability, or with a Bluetooth phone adapter. You can use products that support the Bluetooth Headset profile or the Bluetooth Handsfree profile. To enhance your experience of the Bluetooth Car Handsfree HCB-30, we recommend that you also buy an advanced music mute and a gooseneck microphone. Advanced Music Mute HCE-16 for enhanced sound experience in the car. You hear the caller in the car stereo loudspeakers instead of in the separate loudspeaker.

Gooseneck Microphone HCE-14 for enhanced sound experience for the person you are talking to. You can, for example, also use the following accessories with your phone and Bluetooth Car Handsfree HCB-30: Cigarette Lighter Adapter CLA-11 for charging of the phone in the car. Antenna Cable Connector HCE-12 together with a car holder for better network reception. Car Holder, for example, HCH-28 together with an antenna cable connector for better network reception.
Preparing the car handsfree
To be able to use the car handsfree together with a mobile phone, you need to have a phone with built-in Bluetooth capability, or a phone with a Bluetooth adapter connected to it. You use the keys of the control panel to handle calls. Control panel overview

Indicator lights

Make and answer calls Volume up
Turn off/on the microphone Volume down End and reject calls

The indicator light.

is green is red flashes green slowly flashes green and red flashes red is off
Network coverage and ongoing Bluetooth connection. No network coverage and ongoing Bluetooth connection. Ongoing call. Pairing mode. Creating a Bluetooth connection. No ongoing Bluetooth connection.
Instructions Instructions in this Users Guide are based on car handsfree keys and phone keys. For example, the key or the YES key on the phone can be used to answer a call.
Getting Started Before you start using the car handsfree with a phone for the first time, you need to: Have the car handsfree kit installed in the car. Please refer to the Installation Guide. Note: Please note that the car handsfree should be installed by authorised personnel. Check with your car dealer for recommendations on professional installation engineers.
Pair the car handsfree with your mobile phone. See Pairing the car handsfree on page 7. To turn the car handsfree on Turn the ignition key to on, or press and hold until you hear a short low tone followed by a short high tone. The backlight of the control panel is blue. The car handsfree is on. Note: The first time the car handsfree is turned on, and whenever no devices are paired with the car handsfree, it will automatically be ready for pairing.
To turn the car handsfree off Turn the ignition key to off. The car handsfree is automatically turned off one hour after the ignition is turned off. This way, an ongoing call is not interrupted when the ignition is turned off. The backlight of the control panel switches off. The car handsfree is off. You can also turn the car handsfree off by pressing and holding until you hear a short high tone followed by a short low tone. Pairing the car handsfree Before you can use your car handsfree, you must pair it with your mobile phone. You pair the car handsfree with the phone by adding the car handsfree to a list of paired devices in the phone. They then recognize each other when they connect. To pair the car handsfree with a Sony Ericsson or Ericsson phone 1. Turn on the car handsfree. 2. If the indicator light is green or red, the car handsfree is connected to a Bluetooth device. To disconnect the devices, press until you hear a tone. The indicator light is turned off.

3. Press and hold and at the same time until you hear a long high tone and the indicator lights on the control panel flash green and red. 4. In the phone, scroll to Extras or Connect, YES , Bluetooth, YES, Paired devices, YES, Add device, YES, Phone initiates, YES. 5. A list of device types that you can pair with your phone appears. Scroll to Headset or Handsfree and press YES. 6. HCB-30 appears in the display. Press YES. 7. Enter the car handsfree passkey (0000) and press YES. The phone pairing procedure starts. 8. You may now replace the given car handsfree name with a name of your choice and then press YES. When pairing has been completed, the indicator light on top of the control panel stops flashing.
To pair the car handsfree (general instructions) 1. Turn on the car handsfree. 2. Prepare your phone according to the phones user documentation on pairing. 3. If the indicator light is green or red, the car handsfree is connected to a Bluetooth device. To disconnect the devices, press until you hear a tone. The indicator light is turned off.
4. Press and hold and at the same time until you hear a long high tone and the indicator lights on the control panel flash green and red. 5. Continue according to the instructions in the phones user documentation. The car handsfree passkey is 0000. Resetting the car handsfree You may want to reset the car handsfree to its default settings. This also clears all current pairings. To reset the car handsfree 1. Turn on the car handsfree. 2. If the indicator light is green or red, the car handsfree is connected to a Bluetooth device. To disconnect the devices, press until you hear a tone. The indicator light is turned off. 3. Press and at the same time until you hear a long high tone. 4. Press and at the same time until you hear a long low tone. The car handsfree has now been reset and all current pairings in your car handsfree have been cleared.

Using the car handsfree

Once you have paired the car handsfree with your phone, you can make and receive calls using the control panel of the car handsfree, as long as it is turned on and within range of the phone, with no solid objects in between. The following instructions cover the use of the car handsfree with a Sony Ericsson or Ericsson phone with built-in Bluetooth capability, or with a Bluetooth phone adapter from Sony Ericsson or Ericsson. If you have another make of mobile phone, please refer to the phones user documentation. Note: Always make sure the Bluetooth operation mode in the phone is on when using a Bluetooth car handsfree. Making calls Phone functionality is still available when the car handsfree is connected. You can make a call using the phone keys or using the control panel of the car handsfree. To make a call using the control panel, you use the voice dialling function.

Note: Before voice dialling, you must turn on the voice dialling function and record voice commands in your phone. Please refer to the phones user documentation. To make a call using voice dialling 1. Make sure the phone and the car handsfree are on and within range of each other. Press and hold. You hear a tone. 2. After the highest tone (second or third tone), voice dial as you normally would. 3. End the call by pressing. For some phones, press. You can also make a call using the phones keypad or phone book (if, for example, your phone does not support voice dialling). Note: The number of tones that you hear when voice dialling is dependent on the type of phone. With some phones, you may only hear one tone. Say your voice command after the tone.
To answer a call When the car handsfree rings, press To end a call Press.
Note: For some phones, press
Answering calls When you receive a call, the car stereo is muted automatically. You can answer the call using , using voice answer commands, or using automatic answering mode. Note: For information about voice answering and automatic answering mode, please refer to the phones user documentation.
To reject a call When the car handsfree rings, press
Note: This is dependent on the type of phone.
To turn off the microphone During a call, press to turn off the microphone. You hear a tone when the microphone has been turned off. Press again to resume the conversation. Adjusting the speaker volume You can adjust the car handsfree speaker volume during a call. You hear a tone when you reach the maximum and minimum volume levels. To adjust the speaker volume To increase the volume, press To decrease the volume, press during a call. during a call.
Adjusting the ring volume You can adjust the car handsfree ring volume when you are not engaged in a call. To adjust the ring volume To increase the ring volume, press To decrease the ring volume, press
Transferring sound to car handsfree If you make a call without using the car handsfree, you can, with some phones, transfer the sound from the phone to the car handsfree if the car handsfree is on, paired with the phone and within range.
To transfer the sound to the car handsfree During a call, press on the car handsfree until you hear a tone. (This is dependent on the type of phone.) Or, in some phones, scroll to Ongoing call, YES, Transfer sound, YES. Select the car handsfree in the list, YES. You hear a short high tone when the sound has been transferred. Transferring sound to phone If you make a call using the car handsfree, but for some reason want to take the call in your mobile phone instead, you can transfer the sound from the car handsfree to the phone.
To transfer the sound to the phone During a call, scroll to Ongoing call, YES, Transfer sound, YES , (To phone, YES). You hear a short high tone when the sound has been transferred. Or, with some phones, press on the car handsfree until you hear a tone. Using headset and car handsfree When you enter the car after using the Bluetooth headset, the car handsfree and phone usually connect automatically the moment you turn the ignition key to on. The phone connects to the device which is first in the list of paired devices. If the indicator lights of the car handsfree are off, move the car handsfree to first position of the list of paired devices in your phone. To move the car handsfree to first position 1. Scroll to Extras or Connect, YES, Bluetooth, YES , Paired devices, YES. 2. Select the car handsfree, YES, Set as first, YES. With some phones, you can also select Connect, YES. You then connect to the car handsfree without changing the order of the devices in the list of paired devices.

To switch between phones 1. If the indicator light is green or red, the car handsfree is connected to a Bluetooth device. To disconnect the devices, press until you hear a tone. The indicator light is turned off. 2. Press and hold and at the same time until you hear a long high tone and the indicator lights on the control panel flash green and red.
Note: If you have an ongoing call in your Bluetooth headset, and enter the car and wish to continue your conversation in the car handsfree, you must transfer the sound to the car handsfree. See To transfer the sound to the car handsfree on page 10. Switching between phones You can pair the Bluetooth car handsfree with up to five mobile phones, but you can only use one phone at a time with the car handsfree. If you want to use one of the other phones that you have paired with your car handsfree, you need to enter pairing mode and select the car handsfree again.
3. In the phone that you want to use with the car handsfree, scroll to Extras or Connect, YES, Bluetooth, YES, Paired devices, YES , Add device, YES , Phone initiates, YES. 4. A list of device types appears. Scroll to Headset or Handsfree and press YES. 5. HCB-30 appears in the display. Press YES.

Troubleshooting

This section lists some problems that you might encounter while using your car handsfree.

12 Troubleshooting

Cannot pair the car handsfree with the phone The Bluetooth function in your phone must be set to Automatic or On. Your phone should be inside the car during the pairing procedure. The car handsfree must be on (the backlight of the control panel is blue). Cannot connect to the car handsfree The car handsfree may be connected to another Bluetooth device. The indicator lights of the car handsfree are green or red when the car handsfree is connected to a Bluetooth device. To disconnect the devices, press until you hear a tone. Then connect to the car handsfree by pressing. Your phone may be connected to another Bluetooth device, such as a headset. Disconnect the other Bluetooth device. With some phones, you can also move the car handsfree to first position in the list of paired devices, or select Connect. See Using headset and car handsfree on page 11.
You may have paired your phone with another handsfree device. Some phones can only be paired with one handsfree device at a time. Please check in the phones user documentation or with a Sony Ericsson service partner for supported Bluetooth profiles. Pair your phone with the car handsfree to make them connect. No sound contact between car handsfree and phone The car handsfree and the phone you are using with it have to be paired to recognize each other, and within range. The indicator light is red There is no mobile network within range. Move to get a signal that is strong enough, position your phone somewhere else in the car, or try searching for a new network in the GSM Networks menu of your phone. If you often experience network problems, we recommend you to buy an external car antenna and a car holder. Check with your local retailer to see if your phone supports these accessories.

Connection interrupted You hear a short low tone if the connection between the phone and the car handsfree is interrupted. Try connecting them again by pressing.
Retrieve call in phone? If the question Retrieve call in phone? appears in the phone display every time you make a call from the phone, you have chosen the setting Always ask under Extras or Connect/Bluetooth/Options/Headset sound or H-free sound. This setting controls whether to take outgoing calls in the handsfree equipment or in the phone. Some car handsfree functions do not work If you notice that you cannot make use of all the features in the Bluetooth Car Handsfree HCB-30, please check in your user documentation whether your phone supports the function. You can also check with a Sony Ericsson service partner. For information about support and for Users Guides for Ericsson, Sony and Sony Ericsson mobile phones, see http://www.SonyEricsson.com.

Additional information

Safe and efficient use
Note: Read this information before using your Bluetooth car handsfree. Changes or modifications to this Bluetooth car handsfree not expressly approved by Sony Ericsson may void the user's authority to operate the equipment. Please check for any exceptions, due to national requirements or limitations, in usage of Bluetooth equipment before using this product. Product care Do not expose your product to liquid or moisture or to humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open flames etc. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not use any other accessories than Sony Ericsson or Ericsson originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, fire, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Do not attempt to disassemble your product. The product does not contain consumer serviceable or replaceable components. Only Sony Ericsson service partners should perform service. Do not keep the product in an area prone to dust and dirt. Only use a soft damp cloth to clean your product. If you will not be using the product for a while, store it in a place that is dry, free from damp, dust and extreme temperatures. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it.
Installation Please note that only authorised personnel should install the Bluetooth car handsfree. Please check with your car dealer for recommendations on professional installation engineers. It is recommended that the Bluetooth car handsfree be installed under the dashboard of the car. The control panel of the Bluetooth car handsfree should be installed on the dashboard of the car, so that you can reach the keys from your normal driving position. Some car manufacturers require that you use an external antenna for your phone. Check with your car manufacturer's representative to be sure that all equipment for the Bluetooth car handsfree, including additional accessories, is placed in a safe location. If your car is equipped with an air bag, check that the handsfree equipment does not interfere with its function. The Bluetooth car handsfree equipment is made for use in cars with a 12 volt electrical system. Other supply voltages may cause damage to the equipment. Radio frequency exposure Your Bluetooth car handsfree is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is low, 0.001 watt. Your Bluetooth car handsfree is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible Sony Ericsson or Ericsson mobile phone. Driving Check the laws and regulations on the use of mobile phones and hands free equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.

RF energy may affect some electronic systems in motor vehicles such as car stereo, safety equipment etc. Check with your vehicle manufacturer's representative to be sure that your mobile phone or Bluetooth car handsfree will not affect the electronic systems in your vehicle. Electronic equipment Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment is not, therefore: Do not use your Bluetooth car handsfree near medical equipment without requesting permission. If you are using any personal medical devices, e.g. a pacemaker or a hearing aid, please read in your mobile phone's User's Guide for further information. Blasting areas Turn off all your electronic devices when in a blasting area or in areas posted turn off two-way radio to avoid interfering with blasting operations. Construction crews often use remote control RF devices to set off explosives. Potentially explosive atmospheres Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. Children Do not allow children to play with your Bluetooth car handsfree since it contains small parts that could become detached and create a choking hazard.
Emergency calls IMPORTANT! This Bluetooth car handsfree and the electronic device connected to the hands free operate using radio signals, cellular and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the hands free and the electronic device connected to the hands free must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. Limited Warranty Subject to the conditions of this Limited Warranty, Sony Ericsson Mobile Communications AB (Sony Ericsson), S-Lund, Sweden warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your Product need warranty service, please return it to the dealer from whom it was purchased or contact your local Sony Ericsson Customer Care Center to get further information. What we will do If, during the warranty period, this Product fails to operate under normal use and service, due to defects in materials or workmanship, the Sony Ericsson authorized distributors or service partners will, at their option, either repair or replace the Product in accordance with the conditions stipulated herein.

Conditions 1. The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the Product to be repaired or replaced. Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer. 2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony Ericsson. 3. This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid. 4. This warranty does not cover Product failures due to improper repair installations, modifications or service performed by a non-Sony Ericsson authorized person. 5. This warranty does not cover the car installation of the product. 6. Tampering with any of the seals on the Product will void the warranty. 7. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable national legislation in force, nor the consumer's rights against the dealer arising from their sales/ purchase contract. Supported Bluetooth functions This product supports the Headset profile and the Handsfree profile.

Deutsch

Einfhrung 18 Vorbereiten des Autoeinbausatzes 19 Verwenden des Autoeinbausatzes 23 Fehlerbehebung 27 Ergnzende Informationen 29 Declaration of conformity 93

Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth 12
Bluetooth (RF) Bluetooth 0.001 Bluetooth Sony Ericsson Ericsson RF

RF Bluetooth

Bluetooth
Bluetooth !"#$%&' RF

()*+ Bluetooth /
Sony Ericsson Mobile Communications AB (Sony Ericsson) S-Lund Sweden (1) Sony Ericsson Customer Care Center Sony Ericsson Sony Ericsson 1. Sony Ericsson 2. Sony Ericsson (90) Sony Ericsson 3. 4. Sony Ericsson 5. 6. 7. SONY ERICSSON

%&' Bluetooth ()

Declaration of conformity
We, Sony Ericsson Mobile Communications AB of Nya Vattentornet Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN and EN 301 489-7 following the provisions of Radio Equipment and Telecommunication Equipment directive 1995/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. Lund, April 2002

Place and date of issue

Ulf Persson, Head of Product Business Unit Accessories

Bluetooth Car Handsfree HCB-400
English Deutsch Franais Espaol
This is the Internet version of the user's guide. Print only for private use.

Italiano Portugus

Contents
English. Deutsch. Franais. Espaol. Italiano. Portugus. 62 77
. 92 . 103 Declaration of conformity. 115

English

Introduction 5 Firsttime use 6 Everyday use 8 Troubleshooting 10 Installing 11 Important information 13 Declaration of conformity 115
Sony Ericsson HCB-400 This user guide is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this user guide. All rights reserved. Sony Ericsson Mobile Communications AB, 2005 Publication number: LZT 108 8908/1 R1A Some of the services in this user guide are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service or not. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under license.

Introduction

The Bluetooth Car Handsfree HCB-400 is designed for in-car use and provides a safe and convenient way to make and receive calls while driving. Please read the Safe and efficient use and Limited Warranty sections of this user guide before using your car handsfree. How can I use my car handsfree? When you turn the ignition key, the car handsfree recognizes your mobile phone and they automatically connect. The devices are ready to make and answer calls. You can use your car handsfree with up to five phones.
Please note that the car handsfree should be installed by authorized personnel. Check with your car dealer for recommended installation engineers. See Installing on page 11.

Accessories

Your car handsfree supports a range of accessories to enhance your user experience: Advanced Music Mute HCE-16 to connect the audio from your phone to your car stereo speakers. Gooseneck Microphone HCE-14 to bring the microphone closer to your mouth. If you use a Sony Ericsson phone with your car handsfree, the following accessories are available: A dedicated Car Holder, for example, HCH-38 for K700, together with Antenna Cable Connector HCE-12 for better network reception. Cigarette Lighter Adapter CLA-11 to charge the phone.

Instructions

What phones can I use with my car handsfree? You can use any Bluetooth-enabled phone. Your car handsfree is compatible with Bluetooth-enabled phones from Sony Ericsson, as well as from, for example, Nokia, Motorola and Siemens.
Instructions in this user guide are based on car handsfree buttons and phone keys. For example, you can use the button on the car handsfree or the keys on the phone to answer a call.
English Control panel overview 6 Make and answer calls. Turn On/Off. End and reject calls. Volume control dial. Color ID, five colours each representing an added phone. Select a phone. Add the car handsfree to a phone. Select a colour. Mute/unmute the microphone. 2

Firsttime use

Before you use the car handsfree with a phone for the first time, you need to make sure that: The car handsfree kit is properly installed and turned on. Bluetooth is turned on in your phone. The car handsfree is added to the list of devices in the phone.

Adding the car handsfree

Once the car handsfree is added to the list of devices in the phone, they automatically recognize each other when, for example, the ignition is turned on. You can select a specific Color ID for each phone you use with the car handsfree. You can also replace a phone with another phone for a specific Color ID. A free colour is indicated by the Color ID flashing slowly. A colour already in use is indicated by the Color ID flashing quickly.
To add the car handsfree to a phone
Turn on the car handsfree. Press and hold until the Color ID flashes. Press repeatedly to select a colour. Prepare your phone according to the phones user guide. The car handsfree passkey is 0000. Press and hold until the Color ID flashes. Press repeatedly to select a colour. Rotate the volume control to fine-tune the colour. Press and hold to save the colour.

If the car handsfree is turned off with the button, an ongoing call will be transferred to the phone.
To turn the car handsfree on or off
Turn the ignition key or press and hold.

To fine-tune a Color ID

Turning on or off
You can turn the car handsfree on or off either with the ignition or with the button, independently of each other. If the ignition is turned off during an ongoing call, the car handsfree will automatically turn off after the call has ended. If ignition is off and the car handsfree is turned on with the button, the car handsfree automatically turns off one minute after the last activity. This is the Internet version of the user's guide. Print only for private use. 7

Everyday use

Once you have added the car handsfree to your phone, you can make and receive calls using the control panel of the car handsfree, as long as it is turned on and within range of the phone, with no solid objects in between.
When using a Bluetooth accessory, make sure to always have the Bluetooth function turned on in your phone.
Before voice dialling, you must turn on the voice dialling function and record voice commands in your phone. Please refer to the phones user guide.
To make a call using the phone
Use the phones keypad or phone book. End the call by pressing. Press. After the tone, voice dial as you normally would. End the call by pressing. To redial a number, press and hold hear a tone. End the call by pressing.
To make a call using voice dialling

Selecting a phone

You can use your car handsfree with up to five phones, each represented by a colour. When turned on, the car handsfree automatically searches for phones, starting with the last phone used.
To redial a number using the

until you

button
To manually select a phone
Press repeatedly until the Color ID shows the colour representing your phone.

Answering calls

Making calls
You can make a call using the control panel of the car handsfree, using voice dialling or using the phone keys. 8
When you receive a call, the car stereo is muted automatically. You can answer the call using the control panel or using automatic answering mode. Please refer to the phones user guide regarding automatic answering mode.
To answer a call To reject a call
When the car handsfree rings, press When the car handsfree rings, press

Transferring sound

Depending on the type of phone, you can transfer the sound from the phone to the car handsfree during a call.

To mute the microphone

During a call, press to mute the microphone. You hear a tone when the microphone has been turned off. Press again to resume the conversation.

To transfer the sound to the car handsfree
During a call, press on the car handsfree. To transfer the sound from the car handsfree to the phone, please refer to the phones user guide.

Adjusting the volume

You can both adjust the car handsfree speaker volume and the ring volume. You hear a tone when you reach the maximum and minimum volume levels.
To adjust the speaker volume
During a call, rotate the volume control to increase or decrease the speaker volume.
To adjust the ring volume
When you are not engaged in a call, rotate the volume control dial to increase or decrease the ring volume. This is the Internet version of the user's guide. Print only for private use. 9

Troubleshooting

This section lists some problems that you might encounter while using your car handsfree. Cannot add the car handsfree to the list of devices in the phone The Bluetooth function in your phone must be turned on. Your phone should be inside the car during the procedure and the car handsfree must be on. Make sure that no solid object is between the phone and the car handsfree. Phone and car handsfree do not connect The car handsfree may be connected to another Bluetooth device. Manually select your Color ID, see Selecting a phone on page 8. Your phone may be connected to another Bluetooth device, such as a headset. Disconnect the other Bluetooth device. You may have added another handsfree device to the list of devices in your phone. Some phones can only have one handsfree device in the list at a time. Please refer to the phones user guide.
Connection interrupted You hear a short sound if the connection between the phone and the car handsfree is interrupted. Try connecting them again by pressing. Using headset and car handsfree Please refer to the phones user guide on how to use your phone with several Bluetooth devices. Resetting the car handsfree You may want to reset the car handsfree to default settings.
To reset the car handsfree
Turn on the car handsfree. Press and hold until the Color ID flashes and you hear a long high tone. Press and hold until you hear a long high tone. The car handsfree is now reset.
English Some car handsfree functions do not work If you notice that you cannot make use of all the features in your car handsfree, please check in the phones user guide whether your phone supports the function. You can also check with a Sony Ericsson service partner. For information about support and for user guides for Ericsson and Sony Ericsson mobile phones, see www.SonyEricsson.com/support.

Installing

The Bluetooth Car Handsfree HCB-400 kit includes: electronic box with velcro (1.) external loudspeaker (2.) control panel with adhesive tape (3.) microphone (4.) cables (power cables, ignition sense, music mute) user guide. 3 4

Please make sure that all equipment of the car handsfree is installed in a safe location. If your car is equipped with an air bag, check that the handsfree equipment does not interfere with its function.
The car handsfree should be installed by authorized personnel.
To install the car handsfree
Disconnect the car battery. Place the electronic box under the dashboard of the car. See also installation chart on page 2. It is recommended that the upper side of the electronic box faces the driver with no metallic barrier between the box and the driver. Use the velcro enclosed in the kit to fasten the electronic box. } Connect the bundle of power cables (red and black), music mute cable (yellow) and ignition sense cable (blue) to the electronic box. Connect the black power cable to negative ground. Connect the red power cable, with the integrated fuse, to the positive pole on the car battery. Please note that supply voltages other than 12 volts may cause damage to the equipment. Connect the yellow music mute cable to the car stereo. See A in installation chart on page 2. Connect the blue ignition sense cable to the ignition of the car. See B in installation chart on page 2.
Place the microphone on a fixed part of the car interior, preferably in the middle above the wind screen. Place it directed towards the driver and away from the loudspeaker(s). Place it away from air flows such as windows and ventilation. Make sure that the cable is long enough to reach the electronic box. Connect the microphone to the electronic box. Place the loudspeaker at least 50 cm (20 inches) from the microphone. Make sure that the cable is long enough to reach the electronic box. Connect the external loudspeaker to the electronic box. Choose a suitable location on the dashboard of the car for the control panel. The driver must be able to reach the keys of the control panel from the normal driving position. Make sure that the cable is long enough to reach the electronic box. Remove the adhesive tape from the control panel. Place the control panel in the location you have chosen. Connect the control panel to the electronic box. Connect the car battery.

To install an advanced music mute with the car handsfree
You can buy an advanced music mute separately.

Important information

Safe and efficient use
Read this information before using your Bluetooth car handsfree. Changes or modifications to this Bluetooth car handsfree not expressly approved by Sony Ericsson may render void the user's authority to operate the equipment. Please check for exceptions, due to national requirements or limitations, in usage of Bluetooth equipment before using this product.
Disconnect the car battery. See installation chart on page 3. Proceed as in steps 2-4 in the instructions To install the car handsfree on page 12. Cut the yellow music mute cable since it is not needed when you have an advanced music mute. See A in installation chart on page 3. Connect the blue ignition sense cable to the ignition of the car. See B in installation chart on page 3. Connect the brown end of the advanced music mute cable to the car stereo loudspeakers. Connect the black and yellow ends of the advanced music mute cable to the car stereo. Proceed as in steps 8-9 in To install the car handsfree on page 12.

Product care

Do not expose your product to liquid, moisture or humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open flames. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not use any other accessory than Sony Ericsson or Ericsson originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, fire, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Do not attempt to disassemble your product. The product does not contain consumer serviceable or replaceable components. Only Sony Ericsson service partners should perform this service.
Do not keep the product in an area prone to dust and dirt. Use a soft damp cloth to clean your product. If you will not be using the product for a while, store it in a place that is dry, and dust free; and avoid extreme temperatures. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. handsfree is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible Sony Ericsson or Ericsson mobile phone.

Driving

Installation
Please note that only authorised personnel should install the Bluetooth car handsfree. Please check with your car dealer for recommendations on professional installation engineers. It is recommended that the Bluetooth car handsfree be installed under the dashboard of the car. The control panel of the Bluetooth car handsfree should be installed on the dashboard of the car, so that you can reach the keys from your normal driving position. Some car manufacturers require that you use an external antenna for your phone. Check with your car manufacturer's representative to be sure that all equipment for the Bluetooth car handsfree, including additional accessories, are placed in a safe location. If your car is equipped with an air bag, check that the handsfree equipment does not interfere with its function. The Bluetooth car handsfree equipment is made for use in cars with a 12 volt electrical system. Other supply voltages may cause damage to the equipment.

Check the laws and regulations on the use of mobile phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. RF energy may affect some electronic systems in motor vehicles such as car stereo, and safety equipment. Check with your vehicle manufacturer's representative to be sure that your mobile phone or Bluetooth car handsfree will not affect the electronic systems in your vehicle.

Electronic equipment

Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment is not, therefore: Do not use your Bluetooth car handsfree near medical equipment without permission. If you are using any personal medical device, such as a pacemaker or a hearing aid, please check in your mobile phone's User's Guide for related information.
Your Bluetooth car handsfree is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is low, 0.001 watt. Your Bluetooth car

Radio frequency exposure

Disposal of old electrical & electronic equipment
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Emergency calls

IMPORTANT!
This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider.

Blasting areas

Turn off all your electronic devices when in a blasting area or in areas posted turn off two-way radio to avoid interfering with blasting operations. Construction crews often use remote control RF devices to set off explosives.

Potentially explosive atmospheres
Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

Limited Warranty

Children
Do not allow children to play with your Bluetooth car handsfree since it contains small parts that could become detached and create a choking hazard.
Subject to the conditions of this Limited Warranty, Sony Ericsson Mobile Communications AB (Sony Ericsson), S-Lund, Sweden warrants this product to be free from defects in design, material, and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your Product need warranty service, please return it to the dealer from whom it was purchased or contact your local Sony Ericsson Customer Care Center to get further information.

English What we will do

5 This warranty does not cover the car installation of the product. 6 Tampering with any of the seals on the Product will render void the warranty. 7 THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable national legislation in force, nor the consumer's rights against the dealer arising from their sales/ purchase contract.
If, during the warranty period, this Product fails to operate under normal use and service, due to defects in materials or workmanship, the Sony Ericsson authorized distributors or service partners will, at their option, either repair or replace the Product in accordance with the conditions stipulated herein.

Conditions

1 The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the Product to be repaired or replaced. Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer. 2 If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony Ericsson. 3 This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid. 4 This warranty does not cover Product failures due to improper repair installations, modifications or service performed by a non-Sony Ericsson authorized person.
Supported Bluetooth functions
This product supports the headset profile and the handsfree profile.

Deutsch

Einfhrung 18 Erstbenutzung 20 Tgliche Benutzung 21 Fehlerbehebung 24 Installation 25 Wichtige Informationen 28 Declaration of conformity 115
Sony Ericsson HCB-400 Diese Bedienungsanleitung wird von Sony Ericsson Mobile Communications AB ohne jede Gewhrleistung verffentlicht. Sony Ericsson Mobile Communications AB behlt sich das Recht vor, jederzeit und ohne vorherige Ankndigung Verbesserungen und nderungen an dieser Bedienungsanleitung vorzunehmen, die aufgrund von Druckfehlern, Ungenauigkeiten oder Verbesserungen an Programmen und/oder Gerten notwendig werden. nderungen dieser Art werden in spteren Ausgaben dieser Bedienungsanleitung bercksichtigt. Alle Rechte vorbehalten. Sony Ericsson Mobile Communications AB, 2005 Publikationsnummer: LZT 108 8908/1 R1A Einige der in dieser Bedienungsanleitung beschriebenen Dienste werden nicht in allen Netzen untersttzt. Dies gilt auch fr die internationale GSMNotrufnummer 112. Setzen Sie sich mit dem Netzbetreiber in Verbindung, wenn Sie Informationen zur Verfgbarkeit bestimmter Dienste bentigen. Die Marke Bluetooth und die entsprechenden Logos sind Eigentum von Bluetooth SIG, Inc. Jegliche Benutzung dieser Marken durch Sony Ericsson erfolgt unter Lizenz.

RF Bluetooth

Bluetooth
Sony Ericsson Mobile Communications AB (Sony Ericsson)S-Lund (1) Sony Ericsson Customer Care Center

Sony Ericsson

1 Sony Ericsson * Sony Ericsson 2 Sony Ericsson (90) Sony Ericsson 3 Sony Ericsson 4 Sony Ericsson

7 Sony Ericsson

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

Die Anforderungen der Richtlinie fr Funk- und Fernmeldegerte werden erfllt. Nous nous conformons la Directive R&TTE. Cumplimos con la directiva R&TTE. Il prodotto soddisfa i requisiti della Direttiva R&TTE. Atendemos aos requisitos da Diretriz R&TTE. R&TTE R&TTE Directive
Declaration of conformity
We, Sony Ericsson Mobile Communications AB of Nya Vattentornet Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type DEA-0002003 to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60 950, following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. Lund, June 2006
Ulf Persson, Head of Product Business Unit Accessories
We fulfill the R&TTE Directive.