01GB01COV-AE4.book Seite 1 Montag, 25. Februar 2002 3:09 15

3-233-439-12(1)

n e tio s a Mobile Telephone l U nic ia rc mu e m Operating Instructions mm e Co Co bil r fo Mo ot on N s cs i Er

CMD-Z7

2001 Sony Ericsson Mobile Communications AB
01GB01COV-AE4.book Seite 2 Montag, 25. Februar 2002 3:09 15

My CMD-Z7 Information

For easy reference, please record the following identification numbers for your phone and SIM Card. This information will assist you in customer inquiries to your retail dealer, manufacturer or Network Operator/ Service Provider. In case of loss or theft of your phone and/or SIM Card, call your Network Operator/Service Provider immediately to prevent misuse.

Explanation of the icons

(Instruction purpose only.)

Icons Explanations

n e tio s a l U Notesnic ia Contact your Network Operator/ rc mu Provider for details Service e My Mobile Phone Number: m om om ile C C Operator Customer Service Number: b or M o tf n o My SIM N Number: o Card s cs ri EID Number (IMEI): My Phone's ny So

Important

___________________________________ ___________________________________
(Printed on your SIM Card)
___________________________________
(Printed on the label underneath the battery pack)
01GB01COV-AE4.book Seite 3 Montag, 25. Februar 2002 3:09 15
Do not use your phone in an aircraft, hospitals, petrol stations, or in places where mobile phones are prohibited. Note that in some countries using a cellular phone without a hands-free kit while driving is not allowed. Do not expose your phone to extreme conditions such as high humidity/rain, high temperatures, direct sunlight, caustic/harsh chemicals or dust. Do not allow children to play with your phone. Take special care in the disposal of your battery, using a special facility where available. Do not puncture, burn, or short circuit your battery. Limit the distance between the mains socket and the phone when charging for easy accessibility. Consult your physician or the manufacturer of personal medical devices (pacemakers, hearing aids. etc.) regarding any restrictions on the use of a mobile telephone.

Appendix

n e tio s a l U nic ia rc mu e m mm e Co Co bil r fo Mo ot on N s cs i Er

Menu Operation

Basic Operation
Use only Sony Ericsson Mobile Communications AB-approved CMD-Z7 batteries and accessories with your phone. Do not touch the External Antenna Connector. Use always Sony original accessories. Do not put your mobile phone in a microwave oven; this may cause damage either to the oven or the phone.

Getting Started

Your Sony CMD-Z7

Safety Precautions

01GB01COV-AE4.book Seite 4 Montag, 25. Februar 2002 3:09 15

Warning

Unauthorised batteries, chargers, and accessories will invalidate any approvals and warranty given for your phone and may be dangerous. Do not damage or puncture your battery pack with a sharp object. For use in the car, please connect your GSM mobile phone to an external antenna. The external antenna can be connected to your mobile phone via the appropriate accessory, e.g. Hands-free Kit. Please contact your car manufacturer concerning the appropriate position of the external antenna on your car.

n e tio s a l U nic ia rc mu e m mm e Co Co bil r fo Mo ot on N s cs ri ThisE cartons top layer is made from 85% recycled paper, fluting and inner layer are made from paper. ny 100% recycledretardant not used in cabinets. Halogenated flame
Halogenated flame retardant not used in printed wiring boards in main portions. Lead free solder is used for soldering in certain portions.
01GB01COV-AE4.book Seite 5 Montag, 25. Februar 2002 3:09 15
Welcome to Sony CMD-Z7. 7 Whats Included in Your Kit. 7 Quick Reference. 7 Basic Features of Your Phone. 8 Advanced Jog Dial. 8 Loudspeaker. 8 The Voicemail Key. 8 Manner Mode. 9 Icon Glossary. 9 Menu Overview. 11 Applications Menu. 11 Getting Started. 12 Inserting the Battery Pack. 12 Inserting the SIM Card. 12 Charging the Battery Pack. 13 Switching on Your Phone. 14 Connecting to the Network. 15
Basic Operation. 16 Making Calls (Saving Phonebook Entries). 16 Voice Dialing. 17 Speed Dialing. 18 Answering/Ending Calls. 19 During a call. 20 Entering Text. 22 Standard Text Entry. 22 T9 Text Entry. 23 Phonebook. 24 Phonebook Organisation. 24 Saving Phonebook Entries from Standby Mode 24 Making Calls from the Phonebook. 24 Phonebook Menu. 25 Voicemail. 27 Search. 27 Editing the Phonebook. 27

Table of Contents

01GB01COV-AE4.book Seite 6 Montag, 25. Februar 2002 3:09 15
Menu Operations.29 Messaging. 30 Sounds. 34 Voice Memo. 35 Settings. 36 Divert. 43 Call History. 45 Extras. 46 Clock. 46 Calculator. 47 Games. 48 E-mail. 49 Scheduler. 52 WAP Browser. 54 Applications Menu Operations. 58 Appendix.59 Troubleshooting. 59 Unblocking the SIM Card. 61 Technical Specifications. 61 Declaration of Conformity. 62 Index.65
01GB01COV-AE4.book Seite 7 Montag, 25. Februar 2002 3:09 15
Whats Included in Your Kit
The kit should include one mobile phone, one standard battery, one charger and this manual. If one of these parts is missing, please contact your retail dealer immediately.

0 Clear Key

(Charging and Accessories)

q q qf qg qa qh qj 5 6

Quick Reference

1 Ear piece

qa On/Off Key
2 Advanced Jog Dial 3 Voice Mail Key 4 Keypad 5 Microphone 6 Flip 7 Display 8 Send Key 9 Memo Key

qx External Antenna

Connector
qc Headset Connector qf Finger Stop qg Loudspeaker qh Battery Cover qj Charging Indicator qk Battery Release Button ql External Connector

Call End Key

Welcome to Sony CMD-Z7
01GB01COV-AE4.book Seite 8 Montag, 25. Februar 2002 3:09 15
Basic Features of Your Phone

Advanced Jog Dial

The Jog Dial provides fast and easy menu navigation with only one hand.

Operation Function

01GB01COV-AE4.book Seite 14 Montag, 25. Februar 2002 3:09 15
Removing the charger from the phone:
Both the status bar within the battery icon in the display and the charging indicator (red light) show the charging status. Charging (0C-45C) is complete when the battery icon displays all bars, is no longer blinking and the charging indicator (red light) is off. Full charging can take up to approx. 3 hours, but may vary depending on certain conditions, (e.g. if your phone is switched on or temperature is outside the operating range.) When your battery pack is completely empty, it can take some time until the battery icon appears when charging. As an energy-saving measure, disconnect the charger from the mains socket and from the phone after charging. On exposure to high temperatures your battery may expand slightly. This has no influence on your safety/health and will reduce in size once reexposed to a lower temperature.
on ebattery pack tinearly empty, the s When your ica is battery icon in the display flashes and a beep l U that approximately 1 minute of talk n ciaindicates u time remains. e r mm mm e Co Switching on Your Phone Co bil To switch on/off your phone, press and hold r. fo Mo t Entering PIN (Personal No son Identification Number) Enter your PIN using the s number keys (the PIN ic appears in code as ****) Er and press the Jog Dial (or y
Use only the Sony-specified CMD-Z7 battery pack and charger. Disposal advice: Take special care in the disposal of the battery, using special facilities where available.

Usage time

) to confirm.
01GB01COV-AE4.book Seite 15 Montag, 25. Februar 2002 3:09 15
ion e on your phone do t Connecting to the Once you have switched a Us antenna area above Network not cover the internal ic the finger Stop with your hand. After successfully entering your PIN code, ial un c your phone searches for an available GSM r network. The network search is automatic and e Roaming mm may take a few seconds. If C are out of mm e you oOperator, especially when abroad, You are ready to make and receive calls when o il NetworkNetworkrange of your Home the network operator's name and the signal C another Operator may be selected strength icon appears on the display. to signal strength or Mob automatically, subjectbetween network and roaming agreements tf n The following indicates the strength of the operators. received network signal. If the signal is very No losingso weak, there is a risk of service. cs i Er Strong signaly Weak signal Network not available on S
If you cannot obtain network service the reception strength may be too weak. Move to a higher elevation, a window or an open space and make sure that there is nothing obstructing the antenna.

01GB01COV-AE4.book Seite 29 Montag, 25. Februar 2002 3:09 15

option on

option off
ion e t Us ica 1 Press the Jog Dial to select the Main l Menu from standby mode and rotate the iaMessaging un Sounds c Jog Dial to scroll through the menu Settings er Voice memo options. mm m Divert Phonebook 2 Press the Jog Dial to select the menum Co History Extras option in the centre. Co ) bile Call 3 Press the Jog Dial forward r press (or Scheduler WAP to exit a menu. fo Mo ot on N s cs i Er ny So
Selecting a menu item with the Jog Dial
Your phone automatically defaults to standby mode after approximately 10 minutes of inactivity.
Selecting a menu item with the short-cut key
You can go to each menu by pressing the short-cut key ( ) from the main menu.

Menu Operations

01GB01COV-AE4.book Seite 30 Montag, 25. Februar 2002 3:09 15
This feature offers correspondence options to read, write and send short messages (SMS).
ion e t Read Message Us ica When a new message arrives, you will hear a beep which sounds ial un different from the single beep of the ringer rc e 1 mm steps 1-3 in Read Message (see and see in standby mode. Follow 1 } Messaging } Read } Inbox mm e Co page 30) and select Delete. (} Outbox to read sent messages.) Co to l 2 After selecting the message you want to 2 Scroll through the list of messages bi r delete, select Yes. select the message you want to read and o fo confirm. The M press the Jog Dial to t message o appears on then display. N o 3 Press the Jog Dials options to Delete, s for Back the number Reply, Forward or Call ric in the text. yE n So

To Delete a Message

The capacity for storing incoming and outgoing messages depends on your SIM card and the phone memory. The message memory is full when blinks in the display. Memory Full appears if you try to save a message when the memory is already full. Delete old messages in order to free memory space for new messages. Select Delete All to clear all messages.
01GB01COV-AE4.book Seite 31 Montag, 25. Februar 2002 3:09 15
Follow steps 1-3 in Read Message (see page 30) and select Reply. Choose Text Only or Text, Attach (reply the text with attachment).
Choose Create to create and send a message. } Messaging } Create Choose Text Only or Text, Attach (write the text with a picture/sound message).

ion e t 3 Edit the message and press the Jog Dial. 3 Create your message. a UsEnter thec text. i l 4 Select Send (or Save, Cancel, Settings) Text i}aText,Only: un anmessage and and press the Jog Dial to confirm your c Attach: Add selection. m er } mmessage text. attachment enter the 4 When creating your message, press Follow steps 1-3 in Read Message (see mm e CoDial backward for the followingthe o il Jog page 30) and select Forward. options: C Language, or Mob T9 On/Off, ChangeTemplate, Time, f Date, Phonebook, Last Message, Char. Timer ot on N 1 Follow steps 1-3 in Read Message (see 5 Press the Jog Dial to confirm. Select s page 30) and select Call Back. Enter Number or choose one of the names cs to call back from the Phonebook. Before sending, you 2 Select the numberiyou want r appearing in the are given the following options: from the number(s) Send, Save, Cancel, Settings yE message, then call the number. n So
To Forward a Message To Call Back the Sender of a Message or a Number in the Message Text
To Reply or Edit a Message

Create

01GB01COV-AE4.book Seite 32 Montag, 25. Februar 2002 3:09 15
ion e t s Screen to display the message directly on Urecipient's display (without saving to ca i ial the SIM or to the phone). It is not the unto send confidential c Received message (unread) er recommended the screen option. messages using mm Received message (read) mm e Co how long messages are stored in the Co bil Specifycenter by selecting: 1 Hour, 6 Hours, service Settings r 24 Hours, 1 Week, 4 Weeks. The default } Messaging } Settings fo Mo validity period is 1 Week (network ot on Settings allows you to customise outgoing dependant). messages N including the format, confirmation s report, etc. s Select On if you would like to pay for the ric recipient to respond to your message. (This option is network dependant.) yE n So
SMS list icons indicate the properties of the message Validity Period Reply Cost
If you are interrupted (e.g. incoming call) while creating a message, select Last Message to retrieve the message and complete it continuing from step 4 above. The picture image and sound message can only be sent and received among Sony mobile phones supporting this feature.

Memory Class

You have the following options: SIM to save the message on the recipient's SIM card. Phone to save the message in the recipient's phone.
01GB01COV-AE4.book Seite 33 Montag, 25. Februar 2002 3:09 15
Select On if you would like to receive confirmation that your messages are transmitted to the recipient successfully.

Message Format

} Messaging } Local Area Info
ion e t Us ica 1 } Messaging } n Area Info al iSelect one of theLocal options: u c Before you can send short messages, register er2 } Receivedmviewfollowing m to cell broadcoast your Service Centre number via the Service m Centre option in the Messaging menu. m messages. Co Coto 32 bile } Select Channel to add or delete a broadcast channel. You can create your own signature of up r characters, and choose whether or not to o fo M } Receive? to choose whether or not to attach it when you send SMS. receive Cell broadcast messages. ot on N } Tone to enable/disable a tone to indicate s that you have received a cell broadcast cs message. ri E 3 Press the Jog Dial to confirm your selection. ny So

Specify how your message is transmitted: SMS, E-Mail, Fax, Telex, Voice (if available). The default setting is SMS.

Service Centre Signature

Receive Cell broadcast messages or general messages like weather reports, traffic reports, etc. broadcast to a group of phones in a certain area. Some of these options may be network dependant.

Result Report

Local Area Info
01GB01COV-AE4.book Seite 34 Montag, 25. Februar 2002 3:09 15
Choose Sounds to access any sound-related option in your CMD-Z7, for example ringer melodies, ringer volume, enable/disable sounds, and record your own ringer melodies or other sounds.

My Ringers

ion e t Us ica Ringer l } Sounds } Ringer iaSet Soundn c mu er } Sounds } Set Sound m Choose from four ringer volume levelsm or turn Choose Set Sound the ringer off. m e Co options: to access the following sound Co bil r Assign a sound to be heard at the following fo Mo actions of your CMD-Z7: Receive SMS, t o on Alarm, Scheduler Alarm, Power Up and Select from among different ringer melodies. N Power Down. It is possible to record sounds using the ss c Assign a ringeri sound to different groups rPhonebook.the is not possible to phones microphone. E saved in your It assignyringer melody to a single name/ a n number. So

Ringer Volume

appears in standby mode to remind you when the ringer is turned off.
It is possible to record own ringer sounds using the phones microphone. Choose the respective Icons to Record ( ), Stop ( ), Play ( ), Save ( ) or Delete ( ) a ringer melody.

Event Sounds

Ringer Type

Group Ringer

01GB01COV-AE4.book Seite 35 Montag, 25. Februar 2002 3:09 15
} Key Click to turn the key click sound on/off. } DTMF to turn the DTMF tones on/off. DTMF tones are designed to respond to menu prompts when pressing a key. } Silent to turn off the key click sound on/off.

Error Tone

ion e t Us ica Select Error Tone to assign a sound to the error tone. Choose from a default error tone or ial un c recorded sounds (only if you have sounds e r mm stored under My Sounds). mm e Co Select My Sounds to record own sounds using Co bil the phone's microphone. Choose the respective icons to Record (or Stop ( ), ), o Play ( ), Save ( ) or Delete ( ) aM t f n sound. N o so s ric yE n So

My Sounds

You are responsible for the confidentiality of the recording. You must ask the person you are on the phone with for permission before recording.
In standby mode, you can play back memos by pressing. In standby mode, you can record a memo by pressing and holding. You can record a conversation during a call by pressing.
Select Voice memo to record and play the voice memo. Choose the respective Icons to Record ( ), Stop ( ), Play ( ) or Delete ( ) a voice memo.

Key Click

01GB01COV-AE4.book Seite 36 Montag, 25. Februar 2002 3:09 15

Preferences

} Settings } Preferences Choose Preferences to personalise your phone according to your preferences, e.g. which language, backlight on/off, etc. When you receive your phone, it has the following default settings:

Default

Language Greeting

SIM dependent* 37 Off

ion e s On cat 37 Backlight 37 U lContrast 0ni LCD 37 ia rcSelect NetworkuAuto m 37 me Preferred List SIM dependent 37 om om ile C Info 37 C b MemoryReset r Factory 38 fo Mo ot on N s cs i Er

Wallpaper

* default language depends on language of the Network Operator. ** default wallpaper depends on Network Operator/ Service Provider.
01GB01COV-AE4.book Seite 37 Montag, 25. Februar 2002 3:09 15
} Settings } Preferences } Language Select the appropriate language.
As a short cut, you can also select the language by pressing *#00(country code)#. Select your default language by pressing *#0000#.
on eList to editatheiautomatic t Choose Preferred Us i list. network selection priorityc This feature is helpful e.g. to prioritise roaming partners. ial The Greeting menu allows you to turn on/off un c or to edit the greeting message which appears m er Add Network to add a network operator when you turn your phone on. mlist. to mm e Cothe Network to adjust the order in Move Select pictures as a wallpaper to appear on the Co bil which the names appear in the list. display in standby mode. r Delete Network to remove a network fo Mo operator from the list. t the illumination of Choose Backlight too turn n the N the keypad and display on/off. Switch o Backlight off and your phone's battery charge To display how much memory is available for ss will last longer. SIM, Phone and the Note area. ic r E To adjust they contrast of your display. n So
Preferred List Greeting Wallpaper Backlight Memory Info LCD Contrast
This feature gives you the option to select a network automatically when you turn on your phone, or manually from a list of available networks.

Changing the Barring Password
International Int. Ex. Home All Incoming If Abroad
If the message Invalid appears, the old password you entered was incorrect. If you have difficulties, contact your Network Operator/Service Provider.

Security Code

Cancel All
Some of the restrictions in the Security menu are controlled in the network e.g. Call Barring. Your Network Operator/Service Provider provides a (Network) password if you register for one or more of these network call restrictions (Call Barring).

Call Barring

Barring PWD
01GB01COV-AE4.book Seite 40 Montag, 25. Februar 2002 3:09 15

Call Data

} Settings } Call Data Track or control how long you are on the phone and the cost of calls made. So that Call costs can be used as a security measure e.g. when you lend your phone to someone, you must use your PIN2 as a security code when you set or change options.

Call Time

ion e at Us l Charge Limit ic Charge Limit to set unit un cia Select your phone will not aallow figure at which any r callsm made. If Unit in the Chargemore Check the length of your last call and totale to be Rate m (see calls (incoming and outgoing). Rotate m the Jog selected, omenuvalue.above) wasCurrency,enter the Dial to select which call time you m to In case enter the o want ile C Unit value. of check. Currency Then enter your PIN2 code at the prompt, rC then set the charge limit. olast call, Mob f Check the cost of your tand limit credit.total calls, Reset Call Cost remaining credit Select Reset Call Cost, enter your PIN2 Jog Dial to select the cost you want to check. No son Rotate the code and then reset the call cost. ics the Call time. Use the Jog Dial to reset Er ny Call Cost Setting offers a choice of three options: So
Call Cost Reset Call Time Call Cost Setting
Charge Rate Select Charge Rate to set the currency and price per unit which will be used to calculate the call cost. Enter your PIN2 code at the prompt. Enter a currency and the price per unit (to enter a decimal point, press ).
In order to be able to make phone calls again, reset the Call Cost counter or enter a higher Charge Limit.
01GB01COV-AE4.book Seite 41 Montag, 25. Februar 2002 3:09 15
} Settings } Call Settings Some of the following features may not be supported by some networks.

Caller ID

ion e t Choose whether or not you want the party you Us ica are calling to see your telephone number. ial Select Caller ID from the Call Settings menu. un c Use the Jog Dial to select On, Off or Default e r mm (network default). mm e Co If activated, your phone will alert youo (beep) that a call is waiting so that you don't miss bi r C the Jog l any calls. Select Call Waiting and use fo Mo Dial to select Activate, t Cancel or Check Answer a call by pressing any key on the Status. No son keypad. Answer s the possibility Select Any Key Off. and use the Jog Dial c Some Network Operators offer iseparate phone lines on to select On or to select between two Er your SIM card. This is useful e.g. for separating business and private call costs. ny So

Setting a Divert

Select the option Check status to check the divert settings. Wait for the network response and then you can view the current status on the display.
In step 3, you also have the option to cancel or check status. Select Cancel to cancel the divert; then wait for the network response.
01GB01COV-AE4.book Seite 44 Montag, 25. Februar 2002 3:09 15
The Divert menu offers the following options: } All Calls Divert all calls unconditionally (the phone will not even ring).
} All Data Divert all data calls (the phone will not even ring). } Cancel All Clear all active diverts.
ion e } If Not Reachable t Divert incoming calls when your phone is Us ica switched off or out of network coverage. ial un c } If No Reply e r mm Divert incoming calls if you do not answer the call after a certain period of time. mm e Co } If Busy Coare onbil r Divert incoming calls when your fo Mo the phone (line engaged). ot on } All Fax N s Divert all fax calls (the phone will not even ring). cs i Er ny So
01GB01COV-AE4.book Seite 45 Montag, 25. Februar 2002 3:09 15
ion e t 1 } Call History Us ica 2 Use the Jog Dial to choose one of the ial un c following options: Outgoing Calls, e r mm Incoming Calls or Missed Calls, then press the Jog Dial. mm e Co 3 Make a call by pressing and holding the Co bil Jog Dial on one highlighted name/ number. or fto delete allMo In Step 2, select Deletet All n names/numbers. o N so s ric yE n So
As a shortcut, you can also press mode to display the Call History. Outgoing call Incoming call Missed call
Provides a record and quick access of up to 10 of the last outgoing calls, up to 10 of the last incoming calls and up to 10 missed calls. (This feature is dependent on your Network Operator/Service Provider.)

in standby

Caller ID (Caller Line Identification) is required to support Call History entries. When the Call History reaches its capacity, the oldest number is deleted automatically to provide space for the newest entry.
01GB01COV-AE4.book Seite 46 Montag, 25. Februar 2002 3:09 15
Choose the Extras menu to access the following sub-menus: Clock, Calculator, Games and E-Mail.
ion e t } Extras } Clock Us ica l and stop at a certain time. iaTo startthe timernthe timerappears in the u is Rotate and press the Jog rc When mstandby on, Dial to select a city from display mode. the map (or press the Jog me om in Dial backward to list om ile C cities) for the following C options: or city.Mob } Set to change the home tf n Choose from the following clock formats: 24 N o so } Set to change the foreign city. Hours, AM/PM, With Date, World Clock. Choose Off to have no date/time displayed in s between summer c } Daylight Savingito switch standby mode. r time. time and winter E Choose from the following Clock Chime ny options: Beep, 8h-20h, Off. So

Timer World Clock Clock Format Clock Chime
It is possible to set, switch on/off or set the Alarm to ring at the same time every day (Repeat Daily). When the alarm is on, appears in the display in standby mode. If the phone is switched off, you will not hear the alarm.
The volume of the alarm/timer is determined by the ringer volume setting. If the ringer volume is off, the alarm/timer will ring at the minimum volume. The alarm/timer will still ring even during a call.
01GB01COV-AE4.book Seite 47 Montag, 25. Februar 2002 3:09 15
Use the Jog Dial and keypad to enter the day, month and year (DD/MM/YY) as well as the time in hours and minutes (HH/MM).
If you insert a new battery, please reset the clock.

Enter a number.

ion e t In this example we are going to subtract 20% Us ica Calculator from 120. } Extras } Calculator ial un The Calculator can perform addition (+), c subtraction (-), multiplication (), division e r mm (), and percentage (%) calculation. Press to go through the mathematical mm e Coalso use the You can operations of +, -, , in that order. Coand bil calculator as a currency converter. r Press to clear the entered value the result. fo Mo 1 Enter a number into the calculator screen. ot on Press to start a new calculation while N using the calculator. 2 Press the Jog Dial s backward. cs ri 3 Select the desired currency exchange rate. yE 4 Press the Jog Dial. n So
Press to select = for a result.

Currency Converter

Press to select the mathematical function and then enter another number.

Set Date/Time

} Extras } Calculator
01GB01COV-AE4.book Seite 48 Montag, 25. Februar 2002 3:09 15
Currency Converter Settings
} Extras } Games Select Games from the Extras menu (or press the Jog Dial backward from standby mode to access the Applications Menu). Press (or press the Jog Dial forward) to end the game.
Press the Jog Dial backward when the calculator screen is displayed. Select Settings and press the Jog Dial. Select from the following:

ion e t Us ica l Choose WAP from the Main Menu using the iaGetting un Started c ordermuse WAP, you will Jog Dial or simply press the Jog Dial to er In msettings using parametersneed to make backward from standby mode to access the some specified by Applications Menu. your mm e Co Network Operator/Service Provider. For are It is necessary to register with a Network Co bil your reference, sample parametersyou will provided and underlined however Operator/Service Provider to use this r need the specific parameters from your telephone as a browser. In some cases fo Mo Network Operator/Service Provider in registration has already been completed. t the setup. You may be o Network Operator/Service n Check with your N toso whether your ordertoto completeparameters from the web able obtain the Provider in advance confirm page of your Network Operator/Service subscription allowss WAP Provider. ic accesstotoaccess services and whether it is possible WAP Er when roaming. ny So
As a safety measure, a Security Code may be necessary to use your browser. Use the code that is set as your Security Code (see page 39). Internet access is limited to the sites providing HTML or WML content. WAP (the Wireless Application Protocol created for Internet service via mobile phone) is used to access a WML site. You cannot make phone calls while accessing the mobile Internet.
01GB01COV-AE4.book Seite 55 Montag, 25. Februar 2002 3:09 15
ion e t Us ica ial 2 Select the first field labeled Empty and un c then select Edit. e r mm 3 Enter the Security Code (default 0000) atm the prompt (see also page 39). m e Co the arrow to return to the Edit 9 Select 4 Select Name to enter a name that will be Co bil menu. displayed for your site. r o o 10 Select GW Server toofenter the address of Name: My Provider f the gateway server your Network t enter the URLMthe o on of 5 Select Home Page to Operator/Service Provider. N home page specified by your Network GW Server: 10.255.255.255 s Operator/Service Provider. s 11 Select Security to choose On for a secure Home Page: wap.myprovider.com ric connection to your gateway (GW port E 6 Select Server Type to select WAP or 9203) or Off for a non-secure connection HTML depending on which type of server (GW port 9201) depending on your ny has. your provider Network Operator/Service Provider. o Type: WAP S Server
1 Select WAP from the Main Menu (or press the Jog Dial backward from standby mode to access the Applications Menu). Then select Settings. 8 Select Provider to set the following parameters specified by your Network Operator/Service Provider: Dial Up Number: +(number to access the gateway) ISP User Name: abc ISP Password: sony Data Call Type: Automatic
The browser can be configured to access WAP or HTML sites. The procedure to set up the configuration depends on the server type. See an example for WAP below.
Select Bearer Service to specify the bearer type (Data or SMS) your Network Operator/Service Provider requires. Bearer Service: Data

You can also access your Favourites while browsing (see also While Browsing). However, you will need to enter wsp:// and then the URL to any WAP sites you would like to access during a WAP session. Similarly you will need to enter http:// and then the URL to any HTML sites you would like to access while browsing.
Home: Access your home site. Refresh: Refresh the displayed page. Add to Favourites: Save the current URL. Favourites: Access a URL from Favourites. Manual URL:Access a URL by entering it manually. Quit: Close your browser and return to standby mode.
01GB01COV-AE4.book Seite 58 Montag, 25. Februar 2002 3:09 15
Applications Menu Operations
Your phone has the Applications menu consisting of WAP, E-Mail and Games. It is necessary to register with a Network Operator/Service Provider to use this telephone as a browser or for E-mail. In some cases registration has already been completed. Check with your Service Provider in advance to confirm whether or not this phone has access to these services.
Selecting a menu item in Applications menu
1 Press the Jog Dial backward in standby mode. The Applications menu appears.
ion e t Us the Jogicato n Dial ia2l Rotatethe desired select u c menu. er 3 mm Jog Dial to enter the menu Press the When access to network-specific functions mm e Co choice. (SIM Application Toolkit) is available, the l Co b menu is displayed in Applications. (This i r feature is dependent on your Network fo supported by some Operator and may not be Mo t networks.) o n N so s ric yE n So
01GB01COV-AE4.book Seite 59 Montag, 25. Februar 2002 3:09 15

Troubleshooting

Problem
n e page 13).tio s Unable to switch Empty battery Charge the battery (see ca on l U Note ithat after several Defective battery Replace the battery. n ia u years, gradual decline is normal. rc to an open space or nearer to a window. eMove mm The icon Weak signal appears Outside GSM coverage area Check operator coverage map. mm e Co o ilCall your service provider. SIM not validC r Network access not allowed Try manual network search (see page 37). fo Mob t Call not possible o Dialling error n Use full national area code. When abroad, use N also international access code to reach home o country. ss ic barred All Check settings (Password is needed to clear). Er calls SIM inserted Check for new restrictions. ny Another set Call barring Check outgoing call barring settings (see page So 39).

This equipment complies with the essential requirements of the Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive. 95/54/EC Car Automotive Directive Applies to accessories used in vehicles confirmed by the e-mark. T9 text input is a registered trademark of Tegic Communications Inc. and the T9 text input software is provided under license of Tegic Communications Inc.
Sony Ericsson Mobile Communications AB reserves the right to make changes or improvements to any of the products described in this guide without prior notice.
We, Sony International (Europe) GmbH of
Heisenbergbogen 1 D-85609 Aschheim Dornach Germany declare under our sole responsibility that the product
to which this declaration relates, is in conformity with the following standards and/or other normative documents. R&TTE Article 3.1 (a): EN60950, ES 59005 R&TTE Article 3.1 (b): ETS 300342-1 R&TTE Article 3.2: EN 301419-1 R&TTE Article 3.3: Not Applicable We hereby declare that all essential radio test suites have been carried out and that the above named product is in conformity to all the essential requirements of Directive 1999/05/EC. The conformity assessment procedure referred to in article 10 and detailed in Annex V of Directive 1999/05/EC has been followed with the involvement of the following notified body: BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ, UK Identification mark: 0168
01GB01COV-AE4.book Seite 63 Montag, 25. Februar 2002 3:09 15
The technical documentation relevant to the above equipment will be held at: Sony International (Europe) GmbH, Kapellenstrasse 13, D-85622 Feldkirchen, Germany
Naoya Komada QA & After Sales Service General Manager.
Place and Date: Germany, 03.09.2001
SONY CMD-Z7 and in combination with our accessories,
Declaration of Conformity
01GB01COV-AE4.book Seite 64 Montag, 25. Februar 2002 3:09 15

Important Notice

ion e t Sony Ericsson Mobile Communications AB Us ica agrees that it shall honor the consumer ial un guarantee applicable for this product to the c same extent, and in the same manner as, Sonyr e Corporation. mm mm e Co All Sony trademarks and copyright remain the property of Sony Corporation and are usedil Co Mobile r with permission by Sony Ericsson fo Mob Communications AB. ot on Should you have any questions regarding the N s product, the guarantee, or Sony Ericsson Mobile Communications AB, please contact cs indicated on the i our Helpline Services Er guarantee card. ny So
Effective 1st October 2001, Sony Ericsson Mobile Communications AB was established. This product is manufactured for, by, or under license from, Sony Corporation and/or Sony Ericsson Mobile Communications AB.

Sony CMD Z7

http://cellphones.extemo.com/sony_cmd_z7-mobile.html
Sony CMD Z7: reviews, tips, comments:
menu from sony cmd-z7 why my sony cmd-z7 can not show the menu? epzfezfvjqpl 23ecs2 djg39bsk4chhy2m0xpk2fv ringtone setting how can i setting up my sony cmd z7 vibration to become ringtone as my alert? i want change my alert from vibration to be ringtone. thank's Is there composer I will like to know if there is a composer in the SONY CMD Z7 Hope to hear from you soon Yours faithfully, Kwame Gyasi Sony CMD-Z7 Hi, I brought my Sony CMD-Z7 over with me from the UK and want to use it in NZ, it's locked to ORANGE a UK network and I want to know how to unlock it so I can use it here, can you help?? Pleaseee. Thanks Phil.
Sony CMD Z7 manual, tips, reviews