DCU-11 Installation Guide for Windows 98/SE/ME
Important note: To avoid loss of data, do not remove the USB data cable from the PC or the phone during data transfer. Removing the cable during data transfer may cause unstable operation of the Windows Operating System.
NOTE: The phone does not have to be connected during installation.
1) Download the USB driver files from the Sony Ericsson Global Support Area to your computer. IMPORTANT: Make note of location!!! 2) Attach the DCU-11 USB cable to an unused USB port on your computer. 3) The pop up window in Figure 1 appears. 4) Choose Specify the location of the driver option, and select Next (Figure 1).

Figure 1

5) Check Specify a location: (Figure 2) and choose Next (Figure 2) 6) Enter the location of driver files or select Browse (Figure 2) and search for the folder that you copied the driver files to in step 1.

C:\DCU11_drivers

Figure 2
7) Select Next (Figure 2).
8) Select Next (Figure 3) to continue with the installation process.

USB Cable DCU-11

C:\DCU_~1\SUSCOM.INF

Figure 3

8) To complete the installation, select Finish (Figure 4). Restart your computer.

Figure 4

Verifying USB Cable DCU-11 installation on Windows 98/SE/ME systems: 1. From the Start Menu, select Settings then Control Panel, and then double click on the System icon. 2. Select the Device Manager. 3. The USB Cable DCU-11 can be found under Ports, with the COM-port number shown in parentheses. Note the COM-port number. It may be necessary to enable this device in Phone Monitor Options, found under Control Panel. (Do this after installing the Sony Ericsson PC software applicable for your mobile phone from http://www.sonyericsson.com.) How to enable the device in Phone Monitor Options on Windows 98/SE/ME systems: 1. From the Start Menu, select Settings then Control Panel. 2. Double-click on the Phone Monitor Options icon. 3. Select the COM-port installed as an USB device. 4. Click Enable. 5. Click OK. 6. The COM-port installed as an USB device is now enabled.