Reviews & Opinions
Independent and trusted. Read before buy Sony HDR-SR10!

Sony HDR-SR10

Manual

Download (English)
Sony HDR-SR10 Digital Camcorder & Video Recorder, size: 4.1 MB
Related manuals
Sony HDR-SR10e Annexe 1
Sony HDR-SR10E
Sony HDR-SR10D
Sony HDR-SR10e Annexe 2

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony HDR-SR10Sony Handycam HDR-SR10 Camcorder - 1080i - 2.36 MP - 15 x optical zoom

Hard disk drive, Flash card, 1y warranty, F/1.8-2.6

The HDR-SR10 Handycam camcorder delivers everything you need to shoot stunning Full HD 1920 x 1080 resolution video and 4 megapixel still images. With Hybrid recording technology, you can record to either an internal 40GB hard disk drive or removable Memory Stick Duo or Memory Stick PRO Duo media. A professional-quality Carl Zeiss Vario-Sonnar T lens and ClearVid CMOS sensor (with Exmor technology) and BIONZ image processor let you capture every detail in video and still images. Additionally, Fa... Read more

 

[ Report abuse or wrong photo | Share your Sony HDR-SR10 photo ]

Video review

stanbul (Sony Hdr Sr10 Camera Testing)

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
RogerW 9:27pm on Sunday, October 31st, 2010 
Worst buy I bought this camera off the back of the many glowing reviews it recieves on this website. Simply awesome Bought this on a great deal at amazon - perfect and awesome- battery life is good and clarity is nice - software that come along does t...
kjvsword 10:23pm on Friday, September 3rd, 2010 
takes a little use to make it an everyday simplicity Good in Low Light I have owned several sony cams the earliest was a true work horse, but the later one sucked. It Irretrievably broke after one year of normal use.
ijcd 3:11am on Tuesday, August 17th, 2010 
Positioning itself. But in performance, SONY SR10 adopted a 236 million pixels, 1/5 inches of the CMOS sensor, dynamic model about 149 million pixels,... Sony has sold in China. High-end: the Japanese origin. Medium Low: Shanghai, Guangzhou, Suzhou, Before there is in Malaysia. But few now.
gervasioantonio 11:34am on Friday, July 9th, 2010 
This model from SONY is perhaps the first in its class (HD) to provide image stabilization better than HDR-SR5 (SONY) which lacks the much needed Opti... I looked for a hi-def camera in the low price range (lowest!) since it did not make much sense to invest much in it, as with any latest technology.
dave.johnston83 9:14pm on Tuesday, May 4th, 2010 
I love it, I think the other raters work for other companies. Good price. Good quality. You can use it when it is charging. I was looking for HD camera and not knowing which one to get I decided this one which recommended by the saleman and also trusting the brand name Sony...
jlmcbride 10:01am on Thursday, April 15th, 2010 
I looked for a hi-def camera in the low price range (lowest!) since it did not make much sense to invest much in it, as with any latest technology. Overall, this is a great HD camcorder!
starrman 4:54am on Sunday, April 4th, 2010 
Simply awesome Bought this on a great deal at amazon - perfect and awesome- battery life is good and clarity is nice - software that come along does t... great Handycam I have now got 2 off the same product and this product is easy to use and gives great pictures and easy to record on DVD

Very easy...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

3-286-597-11(1)

Enjoying your camcorder
Digital HD Video Camera Recorder

Getting Started 15

Handycam Handbook

HDR-SR10

Recording/Playback 25
Editing Utilizing recording media Customizing your camcorder Troubleshooting Additional Information

Quick 107 Reference

2008 Sony Corporation
Read this before operating your camcorder
Before operating the unit, please read this Handbook thoroughly, and retain it for future reference. Memory Stick PRO Duo and Memory Stick PRO-HG Duo are both referred to as Memory Stick PRO Duo in this manual. You cannot use any type of memory card other than those mentioned above. Memory Stick PRO Duo can be used only with Memory Stick PRO compatible equipment. Do not attach a label or the like on a Memory Stick PRO Duo or a Memory Stick Duo adaptor. Insert the Memory Stick PRO Duo into the Memory Stick Duo adaptor when using a Memory Stick PRO Duo with Memory Stick compatible equipment.

Notes on use

In Handycam Handbook (this Handbook)
The operations and handling of your camcorder are explained. Refer also to Operating Guide (the separate volume).
Handling the images recorded on your camcorder on the computer
Refer to PMB Guide stored on the supplied CD-ROM.
Types of Memory Stick you can use in your camcorder
For recording movies, it is recommended that you use a Memory Stick PRO Duo of 1 GB or larger marked with:
PRO Duo)* (Memory Stick PRO-HG Duo) * Marked with Mark2 or not, either can be used. (Memory Stick

Using the camcorder

Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers.

LCD screen

Battery pack
See page 24 for the recordable time of a Memory Stick PRO Duo.
Memory Stick PRO Duo/Memory Stick PRO-HG Duo (This size can be used with your camcorder.)
The camcorder is not dustproofed, dripproofed or waterproofed. See About handling of your camcorder (p. 103). Do not do any of the following when the (Movie)/ (Still) mode lamps (p. 20) or the ACCESS lamps (p. 29) are lit or flashing. Otherwise, the media may be damaged, recorded images may be lost or other malfunctions could occur.
Eject the Memory Stick PRO Duo from the camcorder Remove the battery pack or AC Adaptor from the camcorder Apply mechanical shock or vibration to the camcorder
Memory Stick (You cannot use it in your camcorder.)
When connecting your camcorder to another device with a cable, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of your camcorder. Connect cables to the connectors of the Handycam Station when using your camcorder attached to the Handycam Station. Do not connect the cables to both the Handycam Station and your camcorder. Disconnect the AC Adaptor from the Handycam Station holding both the Handycam Station and the DC plug. Be sure to turn the POWER switch to OFF (CHG) when you insert the camcorder into the Handycam Station or remove the camcorder from it.
Exposing the LCD screen or the lens to direct sunlight for long periods of time may cause malfunctions. Do not aim at the sun. Doing so might cause your camcorder to malfunction. Take images of the sun only in low light conditions, such as at dusk.
About changing the language setting
The on-screen displays in each local language are used for illustrating the operating procedures. Change the screen language before using your camcorder if necessary (p. 21).

On recording

Before starting to record, test the recording function to make sure the image and sound are recorded without any problems. Compensation for the contents of recordings cannot be provided, even if recording or playback is not possible due to a malfunction of the camcorder, storage media, etc. TV color systems differ depending on the country/region. To view your recordings on a TV, you need an NTSC system-based TV. Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the copyright laws.

* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 72).
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX screen. You can slow down the playback speed by touching / during pause. You can adjust the volume by touching (HOME) t (SETTINGS) t [SOUND SETTINGS] t [VOLUME], then touch /.
Still images: Touch the tab, then select the desired still image to play back.
Slide show (p. 39) Returns (to the VISUAL INDEX screen)
The recording date/time* Previous/Next
Goes to the VISUAL INDEX screen * The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 72).
To change the media, select the media on [MOVIE MEDIA SET]/[PHOTO MEDIA SET] (p. 22).
To cancel Easy Handycam operation
Press EASY I again. from the LCD screen. disappears
Menu settings during Easy Handycam operation
Press (HOME) C (or B) to display the menu items available for setup changes (p. 12, 64).
Most of the menu items automatically return to the default settings. The settings of some menu items are fixed. For details, see page 86. You cannot use the (OPTION) MENU. Cancel Easy Handycam operation if you want to add effects to images or change settings.
Invalid buttons during Easy Handycam operation
You cannot use some buttons/functions during Easy Handycam operation since they are automatically set (p. 86). If you set an invalid operation, [Invalid during Easy Handycam operation] may appear.

Recording

The images are recorded on the media selected in the media setting (p. 22). In the default setting, both movies and still images are recorded on the hard disk.
(HOME) A (HOME) D PHOTO E Lens cover Opens automatically when the power is switched on.
START/STOP B ACCESS lamp (Hard disk) /CHG (charge) lamp

START/ STOP F

(Movie) lamp/ (Still) lamp
ACCESS lamp (Memory Stick PRO Duo) POWER switch C If the POWER switch is set to OFF (CHG), turn it while pressing the green button.
If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto the media. Do not apply shock or vibration to your camcorder, and do not remove the battery or AC Adaptor. When a movie file exceeds 2 GB, the next movie file is created automatically.

1 Connect your camcorder and a
BRAVIA Sync compatible TV* with the HDMI cable (optional).
2 Turn on your camcorder.
The TV input is switched automatically, and the image of your camcorder is displayed on the TV.

On PhotoTV HD

Your camcorder is compatible with PhotoTV HD. PhotoTV HD allows for highly-detailed, photo-like depiction of subtle textures and colors. By connecting Sonys PhotoTV HD-compatible devices using an HDMI cable* or a component A/V cable**, a whole new world of photos can be enjoyed in breathtaking full HD quality.
* The TV will automatically switch to the appropriate mode when displaying photos. ** Setup of the TV will be necessary. Please refer to the instruction manual of your PhotoTV HDcompatible TV for details.
3 Operate the remote commander
of the TV. You can do the following operations.
Display (VIEW IMAGES) of (HOME) by pressing the SYNC MENU button Display an INDEX screen, such as the VISUAL INDEX screen, by pressing up/ down/left/right/enter buttons on the remote commander of your TV, and play back the desired movies or still images
To set your camcorder, touch (HOME) t (SETTINGS) t [GENERAL SET] t [CTRL FOR HDMI] t [ON] (the default setting). Also set your TV. Refer to the instruction manual of the TV for details.
If you turn off the TV, your camcorder is turned off simultaneously.

Saving images

The images are recorded on the media selected in the media setting (p. 22). Due to the limited capacity of the media, make sure that you save the image data to some type of external media such as a DVD-R or a computer.
You can dub/copy the images recorded on the hard disk to the Memory Stick PRO Duo with your camcorder (p. 51).
Saving images using a computer
By using Picture Motion Browser on the supplied CD-ROM, you can save the images recorded on your camcorder with HD (high definition) image quality or SD (standard definition) image quality. You can rewrite movies with HD (high definition) image quality from the computer to your camcorder, if necessary. For details, see PMB Guide.
Creating a disc with One Touch (One Touch Disc Burn)
You can save images recorded on the hard disk of the camcorder directly to a DVD with ease by pressing the (DISC BURN) button.
Saving images on a computer (Easy PC Back-up)
You can save images recorded on the camcorder on the hard disk of a computer.
Creating a disc with selected images
You can save images copied to your computer on a disc. You can also edit those images.
Refer to the supplied Operating Guide.
Saving images by connecting your camcorder to other devices

Copying still images

You can copy still images from the internal hard disk of the camcorder to a Memory Stick PRO Duo. Insert a Memory Stick PRO Duo into your camcorder before the operation.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor to prevent your camcorder from running out of power during copying.
COPY Press and hold:PREVIEW
Press and hold the image on the screen to confirm the image. Touch to return to the previous screen.
[COPY by date]: Select the recording date of the still image to be copied, then touch. You cannot select multiple dates.
(HOME) t (OTHERS) t [PHOTO COPY].

COPY by date

The [PHOTO COPY] screen appears.
COPY by select COPY by date COPY

Copying starts.

2 Touch the type of copying.
[COPY by select]: To select still images and copy [COPY by date]: To copy all still images of a specified date
To check the copied still images after copying is finished, select [MEMORY STICK] on [PHOTO MEDIA SET] and play them back (p. 23).

Dividing a movie

Select the media which contains the movie you want to divide before the operation (p. 22).
Do not remove the battery pack or the AC Adaptor from your camcorder while dividing the movie. It may damage the media. Also, do not eject the Memory Stick PRO Duo while dividing movies on the Memory Stick PRO Duo. A slight difference may occur from the point where you touch and the actual dividing point, as your camcorder selects the dividing point based on about half-second increments. If you divide the original movie, the movie added to the Playlist will also be divided.
(HOME) t (OTHERS) t [EDIT].
2 Touch [DIVIDE]. 3 Touch the movie to be divided.
at the point where you want to divide the movie into scenes. The movie pauses.
Adjusts the dividing point with more precision after the dividing point has been selected with
Returns to the beginning of the selected movie
Play and pause toggles as you press.
You cannot restore movies once they are divided.

Only the information of the media selected on [MOVIE MEDIA SET] is displayed. Change the media setting if necessary (p. 22).
Deleting all images (Formatting)
Formatting deletes all the images to recover recordable free space. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 16).
To avoid the loss of important images, you should save them (p. 46) before performing [MEDIA FORMAT]. While [MEDIA FORMAT] is activated, do not disconnect the AC Adaptor.
Formatting the Memory Stick PRO Duo
Duo to be formatted into your camcorder.

Formatting the hard disk

(HOME) t (MANAGE MEDIA) t [MEDIA FORMAT] t [MEMORY STICK].
(HOME) t (MANAGE MEDIA) t [MEDIA FORMAT] t [HDD]. Utilizing recording media
3 Touch [YES] t [YES]. 4 When [Completed.] appears,

touch.

2 Touch [YES] t [YES]. 3 When [Completed.] appears,
While the ACCESS lamp is lit, do not eject the Memory Stick PRO Duo from your camcorder. Even the still images protected with another device against accidental deletion are also deleted. Do not attempt the following operations when [Executing.] is on the screen: Operate the POWER switch or buttons Remove the Memory Stick PRO Duo
Preventing data on the hard disk of the camcorder from being recovered
[ EMPTY] allows you to write unintelligible data onto the hard disk of the camcorder. In this way, it may become more difficult to recover any original data. When you dispose of or transfer the camcorder to others, it is recommended that you perform [ EMPTY].
If you perform [ EMPTY], all the images are deleted. To avoid the loss of important images, they should be saved (p. 46) before performing [ EMPTY]. You cannot perform [ EMPTY] unless you connect the AC Adaptor to the wall outlet (wall socket). Disconnect all cables except the AC Adaptor. Do not disconnect the AC Adaptor during the operation. While performing [ EMPTY], do not apply any vibrations or shocks to your camcorder.
4 Press and hold. (back light) for
a few seconds (p. 109). The [ EMPTY] screen appears.
5 Touch [YES] t [YES]. 6 When [Completed.] appears,
DC IN jack on the camcorder and the wall outlet (wall socket).
The actual performing time for [ EMPTY] is approx. 40 minutes. If you stop performing [ EMPTY] while [Executing.] appears, be sure to complete the operation by performing [MEDIA FORMAT] or [ EMPTY] when you use the camcorder next time.

* You can set these items also during Easy Handycam operation (p. 25). ** The menu name is changed to [SOUND SETTINGS] during Easy Handycam operation.
REC MODE (Recording mode)
You can select a recording mode to record a movie with HD (high definition) image quality from 4 levels. HD FH ( )
Records in the highest quality mode (AVC HD 16M (FH)).

HD HQ (

Records in high quality mode (AVC HD 9M (HQ)).

B HD SP (

Records in standard quality mode (AVC HD 7M (SP)).

HD LP (

Increases the recording time (Long Play) (AVC HD 5M (LP)).
You can select a recording mode to record a movie with SD (standard definition) image quality from 3 levels. SD HQ ( )
Records in high quality mode (SD 9M (HQ)).

B SD SP (

Records in standard quality mode (SD 6M (SP)).
The maximum shooting distance using [NIGHTSHOT LIGHT] is about 3 m (10 feet).

SD LP (

WIDE SELECT
When recording with SD (standard definition) image quality, you can select the horizontal to vertical ratio according to the TV connected. Refer also to the instruction manuals supplied with your TV. B 16:9 WIDE
Records images to the full screen on a 16:9 (wide) TV screen.
Increases the recording time (Long Play) (SD 3M (LP)). b Notes
If you record in the LP mode, the quality of movies may be degraded, or scenes with quick movements may appear with block noise when you play back the image.
See pages 11 and 24 for the expected recording time of each recording mode. You can select the [REC MODE] for each media separately.
Records images to the full screen on a 4:3 TV screen. b Notes
Set [TV TYPE] correctly according to the TV connected for playback (p. 74).

AUDIO MODE

You can change the recording sound format. B 5.1ch SURROUND ( 2ch STEREO (
appears temporarily regardless of the setting when you play back movies recorded on the setting; [RECORD SOUND] to [OFF] of [SMTH SLW REC].

DIGITAL ZOOM

You can select the maximum zoom level in case you want to zoom to a level greater than 15 during recording. Note that the image quality decreases when you use the digital zoom.
Records sound in 5.1ch surround.
Records sound in 2ch stereo.

NIGHTSHOT LIGHT

When using either the NightShot (p. 32) or [SUPER NIGHTSHOT] (p. 83) function to record, you can record clearer images by setting [NIGHTSHOT LIGHT], which emits infrared light (invisible), to [ON] (the default setting).

Always displays the remaining media indicator.
Displays the remaining recording time of movies for about 8 seconds in situations such as those described below. When your camcorder recognizes the remaining media capacity while the (Movie) lamp lights up When you press DISP/BATT INFO to switch the indicator from off to on while the (Movie) lamp lights up When you select the movie recording mode on the HOME MENU

GUIDEFRAME

You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/ BATT INFO to make the frame disappear (The default setting is [OFF]).
When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen.
If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.
FLASH LEVEL SUB-T DATE (Subtitle date)
When you set to [ON] (the default setting), you can display the recording date and time while playing back the image recorded on your camcorder, on devices compatible with the subtitle display function. Refer also to the instruction manual of the display device.
The images recorded with HD (high definition) image quality can be played back only on AVCHD format compatible devices. [SUB-T DATE] cannot be set for SD (standard definition) image quality.
You can set this function when you use the built-in flash, or an external flash (optional) that is compatible with your camcorder. HIGH( )
Makes the flash level higher.

B NORMAL( ) LOW( )

Makes the flash level lower.

REDEYE REDUC

You can set this function when you record still images using the built-in flash or an external flash (optional) that is compatible with your camcorder. When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON], appears. You can prevent redeye by activating the pre-flash before the flash flashes.
The redeye reduction may not produce the desired effect due to individual differences and other conditions.

FLASH MODE

You can select the flash setting when you record still images with the built-in flash or an external flash (optional) that is compatible with your camcorder. B AUTO
Automatically flashes when there is insufficient ambient light.

ON ( )

Always uses the flash regardless of the surrounding brightness.

FACE DETECTION

Detects faces and adjusts the focus, color and exposure automatically. Also, optimizes the face image. B ON ( )
Detects a face and shows a frame on it. The detected face image is optimized automatically.

Records without flash.

The recommended distance to the subject when using the built-in flash is approximately 0.3 to 2.5 m (1 to 8 feet). Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. The /CHG (charge) lamp flickers while charging the flash, and remains lit when the battery charge is complete.

The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1 cm (about 13/32 in.) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto.

TELE MACRO

This is useful to shoot small subjects, such as flowers or insects. You can blur out backgrounds and the subject stands out clearer. When you set [TELE MACRO] to [ON] ( ), the zoom (p. 31) moves to the top of the T (telephoto) side automatically and allows recording subjects at a close distance down to about 57 cm (22 1/2 in.).
It is easier to focus on the subject by moving the power zoom lever towards T (telephoto) to adjust the focus, then towards W (wide angle) to adjust the zoom for recording. When you want to record a subject at close range, move the power zoom lever to W (wide angle), then adjust the focus. The focal distance information (distance at which the subject is focused on, if it is dark and focus adjustment is difficult) appears for a few seconds in the following cases (This information will not display correctly if an optional conversion lens is being used). When the focus mode is switched from automatic to manual When you set focus manually
To cancel, touch [OFF], or zoom to wideangle (W side).
When recording a distant subject, focusing may be difficult and can take some time. Adjust the focus manually ([FOCUS], p. 80) when it is hard to focus automatically.

EXPOSURE

You can fix the brightness of a picture manually. Adjust the brightness when the subject is too bright or too dark.

SCENE SELECTION

You can record images effectively in various situations. B AUTO
Select to automatically record images effectively without the [SCENE SELECTION] function.

TWILIGHT* (

1 Touch [MANUAL]. appears. 2 Adjust the exposure by touching. 3 Touch.
Select to maintain the darkening atmosphere of the distant surroundings in twilight scenes. /
To return the setting to automatic exposure, touch [AUTO] t in step 1.

TWILIGHT PORT. (

Select to take a subject in the foreground against a night view.
SPOT METER (Flexible spot meter)
You can adjust and fix the exposure to the subject, so that it is recorded in suitable brightness even when there is strong contrast between the subject and the background, such as subjects in the spotlight on stage. CANDLE ( )
Select to maintain the dim atmosphere of a candlelit scene.

SUNRISE&SUNSET* (

Select to reproduce the atmosphere of scenes such as sunsets or sunrises.
1 Touch the point where you want to fix and adjust the exposure on the screen. appears. 2 Touch [END].

PICT.EFFECT (Picture effect)
You can add special effects to an image during recording. appears. B OFF
Does not use [PICT.EFFECT] setting.

SELF-TIMER

appears when [SELF-TIMER] is set to [ON]. Press PHOTO to start the count down. A still image is recorded after about 10 seconds. To cancel the recording, touch [RESET]. To cancel the self-timer, select [OFF].
You can also operate by pressing PHOTO on the Remote Commander (p. 111).

Images appear in sepia.

B&W (Black and white)
Images appear in black and white.

PASTEL

Images appear as a pale pastel drawing.
BLT-IN ZOOM MIC (Builtin zoom microphone)
When you set [BLT-IN ZOOM MIC] to [ON] ( ), you can record a movie with directional sound as you move the power zoom lever or press the zoom buttons on the LCD frame (The default setting is [OFF]).
MICREF LEVEL (Microphone reference level)
You can select the microphone level for recording sound. Select [LOW] when you want to record an exciting and powerful sound in a concert hall, etc.
If you run into any problems using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. Overall operations/Easy Handycam operation/Remote Commander.85 Batteries/Power sources.86 LCD screen..87 Memory Stick PRO Duo..87 Recording...88 Playing back images.90 Playing back images stored on a Memory Stick PRO Duo on other devices.90 Editing images on your camcorder.90 Viewing on the TV..91 Dubbing/Connecting to other devices...91 Functions that cannot be used simultaneously..91
Overall operations/Easy Handycam operation/Remote Commander
The power does not turn on.
Attach a charged battery pack to the camcorder (p. 16). The plug of the AC Adaptor has been disconnected from the wall outlet (wall socket). Connect it to the wall outlet (wall socket) (p. 16). Set the camcorder onto the Handycam Station securely (p. 16).
The camcorder does not operate even when the power is set to on.
It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction. Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press the RESET button (p. 109) using a pointed object (If you press the RESET button, all settings, including the clock setting, are reset). The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Leave your camcorder with the power of your camcorder on. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on your camcorder.

Use the AC Adaptor. In the default setting, when approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off (A.SHUT OFF). Change the setting of [A.SHUT OFF] (p. 76), or turn on the power again.
When the time selected in [QUICK ON STBY] has elapsed during sleep mode, the camcorder is automatically turned off (p. 76). Turn on the power again. Charge the battery pack (p. 16).
The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one (p. 16).
The /CHG (charge) lamp does not light while the battery pack is being charged.
Turn the POWER switch to OFF (CHG) (p. 16). Attach the battery pack to the camcorder correctly (p. 16). Connect the power cord (mains lead) to the wall outlet (wall socket) properly. The battery charge is completed (p. 16). Set the camcorder onto the Handycam Station securely (p. 16).
Menu items are grayed out.
You cannot select grayed items in the current recording/playback situation. There are some functions you cannot activate simultaneously (p. 91).
The buttons do not appear on the touch panel.
Touch the LCD screen lightly. Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander) (p. 21, 111).
The /CHG (charge) lamp flashes while the battery pack is being charged.
Attach the battery pack to the camcorder correctly (p. 16). If the problem persists, disconnect the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery pack may be damaged.
The buttons on the touch panel do not work correctly or do not work at all.
Adjust the touch panel ([CALIBRATION]) (p. 104).

Memory Stick PRO Duo

You cannot operate functions using the Memory Stick PRO Duo.
If you use a Memory Stick PRO Duo formatted on a computer, format it again on your camcorder (p. 61).
The remaining battery time indicator does not indicate the correct time.
The temperature of the environment is too high or too low. This is not a malfunction. The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one (p. 16). The indicated time may not be correct depending on the environment of use.

Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Guyana, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the USA, Venezuela, etc. Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc. Brazil
Viewing images recorded with SD (standard definition) image quality
To view images recorded with SD (standard definition) image quality, you need an NTSC-system-based TV with AUDIO/ VIDEO input jacks. An A/V connecting cable must be connected.

PAL - M PAL - N SECAM

Argentina, Paraguay, Uruguay. Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
Setting to the local time
You can easily set the clock to the local time by setting a time difference when using your camcorder abroad. Touch (HOME) t (SETTINGS) t [CLOCK/ LANG] t [AREA SET] and [DST SET] or [SUMMERTIME] (p. 75).

World time difference

Time-zone differences
GMT +01:00 +02:00 +03:00 +03:30 +04:00 +04:30 +05:00 +05:30 +06:00 +06:30 +07:00 +08:00 +09:00 +09:30 +10:00

Area setting

Lisbon, London Berlin, Paris Helsinki, Cairo, Istanbul Moscow, Nairobi Tehran Abu Dhabi, Baku Kabul Karachi, Islamabad Calcutta, New Delhi Almaty, Dhaka Rangoon Bangkok, Jakarta HongKong, Singapore, Beijing Seoul, Tokyo Adelaide, Darwin Melbourne, Sydney
+11:00 +12:00 12:00 11:00 10:00 09:00 08:00 07:00 06:00 05:00 04:00 03:30 03:00 02:00 01:00
Solomon Is Fiji, Wellington Eniwetok, Kwajalein Samoa Hawaii Alaska LosAngeles, Tijuana Denver, Arizona Chicago, Mexico City NewYork, Bogota Santiago St. Johns Brasilia, Montevideo Fernando de Noronha Azores, Cape Verde Is.
File/folder structure on the camcorder hard disk and Memory Stick PRO Duo
The file/folder structure is shown below. You do not usually need to acknowledge the file/ folder structure, when recording/playing back images on the camcorder. To enjoy still images or movies by connecting to a computer, see PMB Guide, then use the supplied application.

x When not using your camcorder for a long time
Periodically turn it on and let it run such as by playing back or recording images for about 3 minutes. Use up the battery pack completely before storing it.

Moisture condensation

If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder. This may cause a malfunction to your camcorder. Additional Information x If moisture condensation has occurred Leave your camcorder for about 1 hour without turning it on. x Note on moisture condensation Moisture may condense when you bring your camcorder from a cold place into a warm place (or vice versa) or when you use your camcorder in a humid place as follows:
You bring your camcorder from a ski slope into a place warmed up by a heating device. You bring your camcorder from an air conditioned car or room into a hot place outside. You use your camcorder after a squall or a shower. You use your camcorder in a hot and humid place.
x How to prevent moisture condensation When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the surrounding temperature (after about 1 hour).
3 Touch displayed on the screen with the corner of the Memory Stick PRO Duo or the like 3 times. Touch [CANCEL] to cancel.
If you did not press the right spot, try the calibration again.
Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen. You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.
Do not exert excessive pressure on the LCD screen, as it may cause damage. If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction. While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.

On handling the casing

If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth. Avoid the following to avoid damage to the finish: Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen Handling the camcorder with above substances on your hands Leaving the casing in contact with rubber or vinyl objects for a long period of time
x To clean the LCD screen If fingerprints or dust make the LCD screen dirty, it is recommended you use a soft cloth to clean it. When you use the LCD Cleaning Kit (optional), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid. x On adjustment of the touch panel (CALIBRATION) The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor during the operation.

Glossary

x 5.1ch surround sound
A system that plays back sound on 6 speakers, 3 at the front (left, right and center) and 2 at the rear (right and left) with an additional low-pass subwoofer counted as a 0.1 channel for frequencies of 120 Hz or lower.

x MPEG-4 AVC/H.264

The latest image coding format standardized jointly by two international standardization organizations, the ISO-IEC and the ITU-T, in 2003. Compared with the conventional MPEG2 format, MPEG-4 AVC/H.264 has more than twice the efficiency. Your camcorder employs MPEG-4 AVC/H.264 to encode high definition movies.

x AVCHD format

A high definition digital video camera format used to record an HD (high definition) signal using the MPEG-4 AVC/H.264 format.

x Thumbnail

Reduced-size images which enable you to view many images at the same time. [VISUAL INDEX]/[ INDEX]/[ INDEX] are thumbnail display system.

x Dolby Digital

An audio encoding (compression) system developed by Dolby Laboratories Inc.
VBR stands for Variable Bit Rate, the recording format for automatically controlling the bit rate (the volume of recording data in a given time segment) according to the scene being recorded. For fast-moving video, a lot of media space is used to produce a clear image, so the recording time to the media shortens.
x Dolby Digital 5.1 Creator
Sound compression technology developed by Dolby Laboratories Inc. which compresses audio efficiently while preserving high sound quality. Sounds are compressed effectively with high quality sound, and it enables producing 5.1ch surround sound.

x Fragmentation

The condition of a media in which files are divided into pieces scattered around the media. You may not save your images correctly. You can solve the condition by performing [MEDIA FORMAT] (p. 61).

x JPEG

JPEG stands for Joint Photographic Experts Group, a still image data compression (data capacity reduction) standard. Your camcorder records still images in JPEG format.

x MPEG

MPEG stands for Moving Picture Experts Group, the group of standards for the coding (image compression) of video (movie) and audio. There are MPEG1 and MPEG2 formats. Your camcorder records movies with SD (standard definition) image quality in MPEG2 format.

Numeric

1080i/480i..75 16:9..74 16:9 WIDE..67 480i..75 4:3..67, 74 4:3 TV..42 5.1ch surround recording.31 CANDLE.. 81 Charging the battery. 16 Battery pack. 16 Pre-installed rechargeable battery.. 105 Charging time.. 18 CLOCK SET. 20 CLOCK/LANG.. 75 COLOR SLOW SHTR (Color Slow Shutter). 83, 91 COMPONENT. 75 Component A/V cable.. 15, 41, 43 Computer.. 46 Connection 4:3 TV.. 42 DVD/HDD recorders. 56 High definition TV. 41 Printer.. 58 VCR.. 56 Wide TV.. 42 CONVERSION LENS. 70 CTRL FOR HDMI (Control for HDMI). 77 DROP SENSOR. 76 Dual Rec. 32 D.EFFECT (Digital effect)..84, 92

 

Technical specifications

Full description

The HDR-SR10 Handycam camcorder delivers everything you need to shoot stunning Full HD 1920 x 1080 resolution video and 4 megapixel still images. With Hybrid recording technology, you can record to either an internal 40GB hard disk drive or removable Memory Stick Duo or Memory Stick PRO Duo media. A professional-quality Carl Zeiss Vario-Sonnar T lens and ClearVid CMOS sensor (with Exmor technology) and BIONZ image processor let you capture every detail in video and still images. Additionally, Face Detection technology helps everyone put their best face forward, while the Super SteadyShot optical image stabilization system helps ensure images remain sharp and true.

General
Product TypeCamcorder - 1080i
Width3.2 in
Depth5.1 in
Height3 in
Weight1.2 lbs
Main Features
Camcorder Sensor Resolution2.36 Mpix
Camcorder Effective Video Resolution1.49 Mpix
Camcorder Effective Still Resolution1.99 Mpix
Camcorder Interpolated Still Resolution4.0 Mpix
Widescreen Video CaptureYes
Media TypeHard disk drive, flash card
Color SupportColor
Optical Sensor TypeClearVid CMOS
Optical Sensor Size1/5"
Min Illumination0 lux
Analog Video FormatNTSC
Digital Zoom180 x
Image ProcessorBIONZ
Shooting ModesDigital photo mode
Shooting ProgramsSpotlight, landscape, portrait mode, twilight portrait, fireworks, twilight mode, sunset, candle, beach, snow, sunrise, sports lesson
Special EffectsSepia, Pastel, Monotone, Old Movie
Digital Scene TransitionWhite fader, black fader
Image StabilizerOptical (Super Steady Shot)
Exposure MeteringSpot, matrix
Exposure ModesProgram, automatic
Face DetectionYes
White BalanceCustom, automatic, presets
White Balance PresetsIndoor, outdoor
Digital Video FormatMPEG-2, MPEG-4, AVCHD
Still Image FormatJPEG
Remote ControlCamcorder remote control - infrared
Memory / Storage
Hard DriveHard disk drive - built-in - 40 GB
Image StorageJPEG 2304 x 1296 JPEG 2304 x 1728
Camera Flash
Camera FlashBuilt-in flash
Flash ModesFill-in mode, auto mode, flash OFF mode, red-eye reduction
Red Eye ReductionYes
Effective Flash Range1 ft - 8 ft
Lens System
TypeZoom lens - 3.1 mm - 46.5 mm - f/1.8-2.6
Focal Length3.1 mm - 46.5 mm
Focus AdjustmentAutomatic, manual
Lens ApertureF/1.8-2.6
Optical Zoom15 x
Zoom AdjustmentMotorized drive
Filter Size30 mm
Lens ManufacturerCarl Zeiss
FeaturesBuilt-in lens shield
Additional Features
Low Lux / Night ModeYes
Digital Still Camera FunctionYes
Search ModesIndex search, face index search
Additional FeaturesUSB 2.0 compatibility, touch-screen control, built-in speaker, demonstration mode, backlight compensation, auto power save, digital noise reduction, progressive shutter system, PictBridge support, accessories hot shoe, Dolby Digital 5.1 channel recording, takes photos while movie recording, Dynamic Range Optimizer, face detection
Display
TypeLCD display - TFT active matrix - 2.7" - color
Display Form FactorRotating
Display Format211,000 pixels
Microphone
TypeMicrophone - built-in
Microphone Operation ModeSurround
Microphone FeaturesZoom
Connections
Connector Type1 x composite video/audio output 1 x component video output 1 x S-Video output 1 x Control-L (LANC) 1 x USB 1 x HDMI output
Expansion Slot(s)1 x Memory Stick PRO Duo
Software
SoftwareDrivers & Utilities, Sony Picture Motion Browser
System Requirements for PC Connection
Operating System SupportMS Windows XP, MS Windows Vista, MS Windows 2000 Professional
Peripheral DevicesUSB port, CD-ROM drive
Miscellaneous
Included AccessoriesDocking station
Cables IncludedComponent video cable 1 x A/V cable 1 x USB cable
Power
Power DevicePower adapter - external
Battery
Supported BatterySony NP-FH60
Supported Battery Details1 x Sony NP-FH60 Li-ion rechargeable battery ( included )
Manufacturer Warranty
Service & Support1 year warranty
Service & Support DetailsLimited warranty - parts - 1 year Limited warranty - labor - 90 days
Universal Product Identifiers
BrandSony
Part NumberHDRSR10
GTIN00027242736863, 00027242727779, 04905524488357, 00689466111347

 

Tags

BC-900 Amplifier EP1031 Extra-terrestrial LM914 Asus MEB WA10V5wep XSG ZI2300 2T P4P800 SE CU-E12ckp5 Adsl2MUE SAA7130 GC3332 UE40C6000 ICE-30BC Cantibmlp Mac Kdavx33J-KD-avx33 Decker AST1 TX-SR500 Software BT3100 AR-404 Review IC-7800 Silhouette 1999 KX-TAW848 LP930 D-VR6 Syncmaster 750S SU-B460S Coolpix 3200 Cube 125 Undying PS42C430a1 TI-89 Techwood PL68 Lenco L-69 MB-23 DCP-383C LK-90TV MRP-M352 Travelmate-C210 MVC-FD83 Kxfc195RU Re2100 AVR-1400 DVD4210 AF140C DR-Z125L Toolbox 3 AQ18FCN MAX-ZJ650 NV-DS5B IC-T22A Extra CFD-S100 FWQ5112 Se Date Microphone VGN-AR21M Battery CX7530 HX2000 Srteg10 PL50A450p1 Privileg 470 BHT-600 Samsung T240 NV-GS17E SA-GX370 KX-TH111S MP-360 HC12 6 6620LDT 212 PTZ Primopdf AV220C2 EP4000 EXP2546 EP709 LE08A Thinkpad A20M LFD22860ST Monopoly Rising SUN KH 451 Scanmaker 3840 MP170 LE40A866s1W Urc-2585 VS-10 D550 4 F8gfpc200EA JC-160 MA300 MGH621X Hd KX-TG9331 PHC-Z10 Serie II DSC-P9 BIC I-R 1 3E JBL L55 DZ-GX3300E

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101