Reviews & Opinions
Independent and trusted. Read before buy Sony KDL-40S4000!

Sony KDL-40S4000

Manual

Download (English)
Sony KDL-40S4000 TV, size: 4.6 MB
Related manuals
Sony KDL-40S4000 Annexe 2
Sony KDL-40S4000 Annexe 9
Sony KDL-40S4000 Annexe 8
Sony KDL-40S4000 Annexe 7
Sony KDL-40S4000 Annexe 1

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony KDL-40S4000About Sony KDL-40S4000
Here you can find all about Sony KDL-40S4000 like manual and other informations. For example: review.

Sony KDL-40S4000 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony KDL-40S4000 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony KDL-40S4000 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
acinofomit 4:45pm on Wednesday, April 28th, 2010 
Sony have let themselves down with this one I was after a second TV for the bedroom, and decided a 26" screen would be perfect. This model has a serious problem My first LCD TV, read the reviews. Five stars for five star quality Bought from Amazon in February 2008: 1. Plug and Play - simple to set up.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

LCD Digital Colour TV

Operating Instructions

KDL-52V4000/52V42xx KDL-46V4000/46V42xx KDL-40V4000/40V42xx KDL-40S40xx/40U40xx
2008 Sony Corporation 3-298-969-11(2)
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/ DVBC/

Trademark information

is a registered trademark of the DVB Project Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. BRAVIA and are trademarks of Sony Corporation.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product. s The illustrations used in this manual are of the KDL-40V4000 unless otherwise stated. s The xx that appears on the model name, corresponds to two numeric digits related to design or colour variation.

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
Notes on Digital TV function
s Functions related to Digital TV ( ) will work only in countries or areas where a compatible DVB-C (MPEG2) cable service is available. Confirm with your local dealer whether the area you are in receives DVB-T signals, or ask your cable provider whether its DVB-C cable service is compatible with this TV. s Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business. s This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed. s Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers.

Table of Contents

Start-up Guide 4
Safety Information.... 9 Precautions..... 10 Remote Control and TV Controls/Indicators... 12

Watching TV

Watching TV.... 16 Using the Digital Electronic Programme Guide (EPG) Using the Digital Favourite List.. 18

.... 20

Using Optional Equipment
Connecting Optional Equipment.... 21 Viewing Pictures from Connected Equipment.... 23 Using BRAVIA Sync (Control for HDMI).... 24

Using Menu Functions

Navigating through menus... 25 TV Settings Menu..... 26

Additional Information

Specifications.... 35 Troubleshooting..... 37
: for digital channels only
Before operating the TV, please read Safety Information (page 9). Retain this manual for future reference.

Start-up Guide

1: Checking the accessories
Mains lead (Type BF)* (1) Stand (1) and screws (4) Remote RM-ED013 (1) Size AA batteries (R6 type) (2)
* Do not remove the ferrite cores.

2: Attaching the stand (except for KDL-52V4000/ 52V42xx)
To insert batteries into the remote
Push and lift the cover to open.
If using an electric screwdriver, set the tightening torque at approximately 1.5 Nm (15 kgfcm).
3: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART
Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI
Set Top Box/recorder (e.g. DVD recorder)
4: Preventing the TV from toppling over

5: Bundling the cables

6: Performing the initial set-up
1 Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
2 Install a machine screw (M5 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord.
If you want to change the order of analogue channels, follow the steps in Programme Sorting on page 31. If your TV cannot receive digital broadcasts, the Clock Set menu appears on the screen (page 28).
Select Home for the best TV settings to use the TV in the home.

Control for HDMI

Do you want to enable control for compatible HDMI devices?
Make sure that the aerial is connected.

Yes No

When you select Cable, we recommend that you select Quick Scan for quick tuning. Set Frequency and Network ID according to the information supplied from your cable provider. If no channel is found using Quick Scan, try Full Scan(though it may take some time). For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/ DVBC/
Do not press any buttons on the TV or remote while searching for available channels.
Adjusting the viewing angle of the TV (except for KDL40U40xx)
This TV can be adjusted within the angles shown below. Adjust the angle left and right (swivel)

Top view

Detaching the Table-Top Stand from the TV ~
Remove the screws guided by the arrow marks of the TV. Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. KDL-52V4000/52V42xx/46V4000/46V42xx/ 40V4000/40V42xx

KDL-40S40xx/40U40xx

Safety Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.

Ventilation

s Never cover the ventilation holes or insert anything in the cabinet. s Leave space around the TV set as shown below. s It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.

Installed on the wall

30 cm 10 cm 10 cm

Installation

s The TV set should be installed near an easily accessible mains socket. s Place the TV set on a stable, level surface. s Only qualified service personnel should carry out wall installations. s For safety reasons, it is strongly recommended that you use Sony accessories, including: KDL-52V4000/52V42xx: Wall-mount bracket SU-WL500 KDL-46V4000/46V42xx/40V4000/40V42xx/40S40xx/ 40U40xx: Wall-mount bracket SU-WL500 TV stand SU-FL300M s Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8 mm - 12 mm
10 cm Leave at least this space around the set.

Installed with stand

30 cm 10 cm 10 cm 6 cm
Leave at least this space around the set. s To ensure proper ventilation and prevent the collection of dirt or dust: Do not lay the TV set flat, install upside down, backwards, or sideways. Do not place the TV set on a shelf, rug, bed or in a closet. Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. Do not install the TV set as shown below. Air circulation is blocked.
Screw (supplied with the Wall-mount bracket) Mounting Hook Hook attachment on rear of TV set

Transporting

s Before transporting the TV set, disconnect all cables. s Two or three people are needed to transport a large TV set. s When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel. s When lifting or moving the TV set, hold it firmly from the bottom. s When transporting the TV set, do not subject it to jolts or excessive vibration. s When transporting the TV set for repairs or when moving, Be sure to hold the bottom of pack it using the original the panel, not the front part. carton and packing material. Do not handle with dent area. Do not handle with the transparent bottom part.

Mains lead

Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: Use only Sony mains leads, not those of other brands. Insert the plug fully into the mains socket. Operate the TV set on a 220240 V AC supply only. When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. Disconnect the mains lead from the mains socket before working on or moving the TV set. Keep the mains lead away from heat sources. Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.
s Do not use the supplied mains lead on any other equipment. s Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken.

(Continued)

s Do not modify the mains lead. s Do not put anything heavy on the mains lead. s Do not pull on the mains lead itself when disconnecting the mains lead. s Do not connect too many appliances to the same mains socket. s Do not use a poor fitting mains socket.

Precautions

Viewing the TV
s View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes. s When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

LCD Screen

s Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction. s Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged. s If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises. s Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments. s The screen and cabinet get warm when this TV set is in use. This is not a malfunction. s The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Remote Control and TV Controls/Indicators
Remote control and TV controls
Buttons on the TV will work the same as those on the remote control.
* In TV menu, these buttons will work as F/f/G/g/
z The number 5, N, PROG + and AUDIO buttons have a tactile dot. Use the tactile dots as a reference when operating the TV.

Button

Description
1 "/1 (TV standby) (Power)
Press to turn the TV on and off from standby mode. Press to turn the TV on or off.
To disconnect the TV completely, turn off the TV, then unplug the mains lead from the mains. 3

F/f/G/g/

4 MENU 5 RETURN /
Press F/f/G/g to move the on-screen cursor. Press to select/confirm the highlighted item. Press to display the TV menu (page 25). Press to return to the previous screen of the displayed menu.

6 PROG +// /

In TV mode: Press to select the next (+) or previous () channel. In Analogue Text mode: Press to select the next ( ) or previous ( ) page. Press to adjust the volume.

+/ (Volume) 8 % (Mute)

Press to mute the sound. Press again to restore the sound. z In standby mode, if you want to turn on the TV without sound, press this button. 9 / (Input In TV mode: Press to display a list of equipment connected to the TV (page 23). select/Text In Analogue Text mode: Press to hold the current hold) page. 0 TOOLS Press to display a list that contains PAP (page 23), PIP (page 23), Device Control, or shortcuts to some setting menus (page 26). Use the Device Control menu to operate equipment that is compatible with control for HDMI. The listed options vary depending on the input source. qa / (Text) qs / (Info/ Text reveal) Press to display text information (page 16). In digital mode: Displays details of the programme currently being viewed. In analogue mode: Displays information such as current channel number and screen format. In Analogue Text mode (page 17): Reveals hidden information (e.g. answers to a quiz). qd GUIDE / Press to display the Digital Electronic (EPG) Programme Guide (EPG) (page 18). qf (Favourite) Press to display the Digital Favourite List that you have specified (page 20). qg Coloured buttons When the coloured buttons are available, an operation guide appears on the screen. Follow the operation guide to perform a selected operation (page 17, 18, 20). Press to display the digital channel that was last viewed. Press to display the analogue channel that was last viewed.

Set a programme to be recorded Timer REC
z You can perform the above procedure even if the programme you want to record has already started. Set a programme to be displayed automatically on the screen when it starts Reminder
Press F/f/G/g to select a future programme you want to display, then press. Press F/f to select Reminder, then press. A c symbol appears next to the programmes information. The indicator on the TV front panel lights up in orange.
If you switch the TV to standby mode, the TV will automatically turn on when the programme starts. Set the time and date of a programme you want to record Manual timer REC
Press. Press F/f to select Manual timer REC, then press. Press F/f to select the date, then press g. Set the start and stop time in the same way as in step 3. Press F/f to select the programme, then press. Press to set the timers on the TV and recorder. The indicator on the TV front panel lights up in orange.

Do this

Cancel a recording/reminder Timer list
Press. Press F/f to select Timer list, then press. Press F/f to select the programme you want to cancel, then press. Press F/f to select Cancel Timer, then press. A display appears to confirm that you want to cancel the programme. Press G/g to select Yes, then press. Watching TV
You can set recorder timer recordings on the TV only when the connected recorder is compatible with SmartLink. However, depending on the connected recorder type, this setting may not be available even though the recorder is SmartLink-compatible. For details, refer to the instruction manual supplied with your recorder. Once a recording has begun, you can switch the TV to standby mode, but do not turn off the TV completely, or the recording will be cancelled. If an age restriction has been set to programmes, a message asking for a PIN code appears on the screen. For details, see Parental Lock on page 34.
Using the Digital Favourite List
You can specify up to four of your favourite channel lists.
1 In digital mode, press. 2 Perform the desired operation as shown in

Digital Favourite List

* This function may not be available in some countries/ areas. Do this
Create a Favourite list for the first time
Press to select Yes. Press the yellow button to select the Favourite list. Press F/f to select the channel you want to add, then press. A symbol appears next to channels that you have stored in the Favourite list. Press the yellow button to select a Favourite list. Press F/f to select a channel, then press. Press the blue button. Press the yellow button to select the Favourite list to edit. Press F/f to select the channel to add or remove, then press Press the blue button. Press the yellow button to select the Favourite list to edit. Press the blue button. Press G/g to select Yes, then press.

qa i Headphones

Viewing Pictures from Connected Equipment
Turn on the connected equipment, and perform one of the following operations.
For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

select the TV channel.

To return to single picture mode

or RETURN.

z The picture framed in green is audible. You can switch the audible picture by pressing G/g.
Start playback on the connected equipment. The picture from the connected equipment appears on the screen.
For an auto-tuned recorder
To view two pictures simultaneously PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 21), and make sure that images from the PC appear on the screen.
In analogue mode, press PROG +/ or the number buttons, to select the video channel.
For other connected equipment
Power Management (page 29) is not available in PIP mode.
Press to display a list of connected equipment. Press F/f to select the desired input source, then press. The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to Skip in the AV Preset menu (page 30), that input source does not appear in the list.
z To return to normal TV mode, press DIGITAL or ANALOG.
1 Press TOOLS. 2 Press F/f to select PIP, then press.
The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen. You can use F/f/G/g to change the position of the TV programme screen.

select a TV channel.

To view two pictures simultaneously PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect an optional equipment (page 21), and make sure that images from the equipment appear on the screen (page 23).

Press RETURN.

z You can switch the audible picture by selecting Audio Swap from the Tools menu.
This function is not available for a PC input source. You cannot change the size of the pictures. The analogue TV video in the TV programme picture will not appear while displaying AV1, AV2 or AV3 in the external input picture. However, you can hear the analogue videos sound.
1 Press TOOLS. 2 Press F/f to select PAP, then press.
The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right.
To make the control for HDMI settings

Live Colour

Sound Effect Sets the sound mode. Dynamic Intensifies clarity and sound presence for better intelligibility and musical realism by using the BBE High definition Sound System. Enhances clarity, detail, and sound presence by using BBE High definition Sound System. Makes voice sound clearer. Using Menu Functions Uses the TV speakers to simulate the surround effect produced by a multi channel system. BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi sound. The clarity of the sound is improved by BBE while the width depth and height of sound image are expanded by BBEs proprietary 3D sound process. BBE ViVA Sound is compatible with all TV programs including news, music, dramas, movies, sports and electronic games.
Standard Clear Voice Dolby Virtual BBE ViVA
If Auto Volume is set to On, Dolby Virtual is automatically changed to Standard. Reset Treble Bass Balance Auto Volume Volume Offset Dual Sound Resets all the Sound settings to the factory settings excluding Dual Sound. Adjusts higher-pitched sounds. Adjusts lower-pitched sounds. Emphasises the left or right speaker. Keeps volume level constant across all programmes and adverts (e.g. adverts tend to be louder than programmes). Sets an independent volume level to each equipment connected to the TV. Sets the sound from the speaker for a stereo or bilingual broadcast. Stereo/Mono A/B/Mono For stereo broadcasts. For bilingual broadcasts, select A for sound channel 1, B for sound channel 2, or Mono for mono channel, if available.
For other equipment connected to the TV, set Dual Sound to Stereo, A, or B. When you connect an external equipment to the HDMI socket, Dual Sound is automatically set to Stereo (except when using the audio in sockets).

Features

Quick Start Power Saving The TV turns on faster than usual within two hours after switching to standby mode. However, power consumption in standby mode is higher than usual. Reduces power consumption of the TV by adjusting the backlight. When you select Picture Off, the picture is switched off, and the (Picture Off) indicator on the TV front panel lights up in green. The sound remains unchanged. Provides improved picture movement when playing DVD or VCR images taken on film, reducing picture blur and graininess. Auto Off Provides smoother picture movement than the original filmbased content. Use this setting for standard use. Turns off the Film Mode.

Film Mode

If the image contains irregular signals or too much noise, Film Mode is automatically turned off even if Auto is selected. Video/Photo Sets the image quality setting most suited to the input source (video or photograph data). Video-A Sets suitable image quality, depending on the input source, video data or photograph data when directly connecting Sony HDMI output-capable equipment that supports Video-A mode. Produces suitable image quality for moving pictures. Produces suitable image quality for still images.

Vertical Shift is not available when Display Area is set to Full Pixel. Vertical Size PC Settings Screen Format Adjusts the vertical size of the picture when Screen Format is set to Smart, Zoom or 14:9. Sets a screen format for displaying pictures from your PC. Full 1 Enlarges the picture to fill the vertical display area, while maintaining its original proportion. Enlarges the picture to fill the display area.

Full 2 Reset

Resets all PC screen settings to factory settings.
Auto Adjustment Automatically adjusts the display position and phase of the picture when the TV receives an input signal from the connected PC. z Auto Adjustment may not work well with certain input signals. In such cases, manually adjust Phase and Horizontal Shift. Phase Pitch Horizontal Shift Power Management Adjusts the phase when the screen flickers. Adjusts the pitch when the picture has unwanted vertical stripes. Adjusts the horizontal position of the picture. Switches the TV to standby mode if no signal is received for 30 seconds.

AV Set-up

AV Preset
Assigns a name to equipment connected to the side and rear sockets. The name appears briefly on the screen when you select the equipment. You can skip input sources from connected equipment that you do not want displayed on the screen. 1 Press F/f to select the desired input source, then press. 2 Press F/f to select the desired option, then press. Equipment labels Edit: Uses preset labels to assign a name to connected equipment. Allows you to create your own label. Press F/f to select the desired letter or number, then press g. Repeat this step until you complete the name, then select OK and press. Skips unnecessary input sources.

Skip AV2 Input

Sets a signal to be input from the / / AV2 socket. Usually, set to Auto. However, depending on the connected equipment, the signal may not be correctly detected even though Auto is selected. If the video from the equipment connected to the / / AV2 socket is not displayed correctly, select Composite, S Video, or RGB for the signal of the connected equipment. Sets a signal to be output to the / / AV2 socket. If you connect a recorder or other recording equipment to the / / AV2 socket, you can record the output signal from other equipment connected to the TV. TV Auto Outputs TV broadcasts. Outputs whatever is being viewed on the screen (except signals from the / COMPONENT IN, HDMI IN 1, HDMI IN 2, HDMI IN 3, and / PC IN sockets). Turns on and outputs the TVs sound from the TV speakers. Turns off the TV speakers and outputs the TVs sound from external audio equipment connected to the audio output sockets on the TV. You can also turn on the connected equipment that is compatible with control for HDMI, after making the appropriate settings of control for HDMI. Allows you to use the TVs remote to control audio output from an audio system connected to the TV. The audio output of the TV is fixed. Use your audio receivers volume control to adjust the volume (and other audio settings) through your audio system.

Subtitle Set-up

Audio Language
Audio Description Mixing Level Radio Display
Provides audio description (narration) of visual information, when such information is available. Adjusts the TV main audio and Audio Description output levels.
Displays the screen wallpaper when you listen to a radio broadcast. You can select the screen wallpaper colour, or display a random colour. To cancel the screen wallpaper display temporarily, press any button. Sets an age restriction to viewing or recording programmes. To view or record any programme rated for ages above the age you specify, enter the correct PIN code. 1 Press the number buttons to enter your PIN code. If you have not already set a PIN code, a PIN code entry screen appears. Follow the instructions in PIN Code below. 2 Press F/f to select an age restriction or None (for unrestricted watching), then press. 3 Press RETURN. To set a PIN for the first time

Parental Lock

PIN Code
Press the number buttons to enter a PIN code. Press RETURN.
To change your PIN Press the number buttons to enter your PIN code. Press the number buttons to enter a new PIN code. Press RETURN.
z PIN code 9999 is always accepted. Technical Set-up Auto Service Update Software Download Enables the TV to detect and store new digital services as they become available. Enables the TV to automatically receive free software updates through your existing aerial/cable (when issued). We recommend that you leave the setting to On at all times. Displays the current software version and the signal level. Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/area. Sets whether or not to automatically switch between summer time and winter time. Off: Displays the time according to the time difference set in Time Zone. On: Automatically switches between summer time and winter time according to the calendar. CA Module Setup Provides access to a pay TV service after you obtain a Conditional Access Module (CAM) and a view card. See page 22 for the location of the (PCMCIA) socket.
System Information Time Zone

Auto DST

Specifications
Model name System Panel system TV system Colour/video system Channel coverage
LCD (Liquid Crystal Display) Panel Analogue: Depending on your country/area selection: B/G/H, D/K, L, I Digital: DVB-T/DVB-C Analogue: PAL, SECAM, NTSC 3.58, 4.43 (only video input) Digital: MPEG-2 MP@ML/HL Analogue: VHF: E2E12/UHF: E21E69/CATV: S1S20/HYPER: S21S41 D/K: R1R12, R21R69/L: F2F10, BQ, F21F69/I: UHF B21B69 Digital: VHF/UHF 10 W + 10 W

KDL-40S40xx/ 40U40xx

KDL-40V4000/ 40V42xx

KDL-46V4000/ 46V42xx

KDL-52V4000/ 52V42xx
Sound output Input/Output jacks Aerial/cable / AV1 AV2
75 ohm external terminal for VHF/UHF 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/ video output. 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, S video input, selectable audio/video output, and SmartLink interface. Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/ PR/CR: 0.7 Vp-p, 75 ohms Audio input (phono jacks) Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits Analogue audio input (minijack) (HDMI IN 2 only) PC Input (see page 36) Video input (phono jack) Audio input (phono jacks) Digital optical jack

/ / (SmartLink)

COMPONENT IN
COMPONENT IN HDMI IN 1, 2, 3
AV3 AV3 DIGITAL AUDIO OUT (OPTICAL) (except for KDL40S40xx/40U40xx)
Audio output (phono jacks)
PC Input (D-sub 15-pin) (see page 36) G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/ R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p PC audio input (minijack) Headphones jack CAM (Conditional Access Module) slot
i Power and others Power requirements Screen size (measured diagonally) Display resolution Power in Home/ consumption Standard mode in Shop/ Vivid mode Standby power consumption*
220 V 240 V AC, 50 Hz 40 inches (Approx. 101.6 cm) 40 inches (Approx. 101.6 cm) 46 inches (Approx. 116.8 cm) 52 inches (Approx. 132.2 cm)
1,920 dots (horizontal) 1,080 lines (vertical) 175 W 175 W 215 W 222 W

197 W 0.19 W

Model name Dimensions (Approx.) (w h d) Mass (Approx.)
KDL-40S40xx/ 40U40xx with Table-Top 99.7 69.1 27.9 cm Stand without TableTop Stand

99.7 64.4 11.0 cm

98.6 68.4 27.9 cm 98.6 64.6 11.0 cm 21.5 kg 18.5 kg
112.0 78.2 30.7 cm 112.0 74.2 11.5 cm 29.0 kg 25.0 kg
126.2 87.1 34.7 cm 126.2 82.9 11.9 cm 38.0 kg 32.0 kg
with Table-Top 23.0 kg Stand without TableTop Stand

20.0 kg

Supplied accessories Optional accessories
See 1: Checking the accessories on page 4. SU-WL500 Wall-Mount Bracket/SU-FL300M TV stand SU-WL500 WallMount Bracket
* Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
PC input signal reference chart for
Resolution Signals VGA Horizontal (Pixel) 1280 Vertical (Line) 1024
Horizontal frequency (kHz) 31.5 37.5 31.5 37.9 46.9 48.4 56.5 60.0 47.4 47.8 60.3 47.7 64.0 Vertical frequency (Hz) 60 Standard VESA VESA VGA-T VESA Guidelines VESA VESA Guidelines VESA VESA VESA VESA VESA VESA

The picture is not displayed in Select Reset (page 26). colour. The picture from equipment connected to the COMPONENT IN sockets is not displayed in colour, or is displayed in irregular colours. Check the connection of the COMPONENT IN sockets and check if the sockets are firmly seated in their respective sockets.

Condition

Explanation/Solution
The picture is good, but there Press 2 +/ or % (Mute). is no sound. Check if the Speaker is set to TV Speaker (page 30). When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

Channels

You cannot select your desired Switch between digital and analogue mode, and select the desired channel. digital/analogue channel. Some channels are blank. The channel is for scrambled/subscription service only. Subscribe to a pay TV service. The channel is used only for data (no picture or sound). Contact the broadcaster for transmission details. Contact a local installer to find out if digital transmissions are provided in your area. Upgrade to a higher gain aerial. Check if the Sleep Timer is activated, or confirm the Duration setting of On Timer Settings (page 28). If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. Check if the On Timer Settings is activated (page 28).
You cannot view digital channels.

General

The TV turns off automatically (the TV enters standby mode). The TV turns on automatically.
Some input sources cannot be Select AV Preset and cancel the Skip setting for the input source selected. (page 30). The remote does not function. Replace the batteries. You cannot add a channel to the Favourite list. HDMI equipment does not appear on HDMI Device List. You cannot select Off in Control for HDMI. Up to 999 channels can be stored in the Favourite list. Check that your equipment is compatible with control for HDMI.
If you have connected any audio system that is compatible with control for HDMI, you cannot select Off in this menu. If you want to change the audio output to the TV speaker, select TV Speaker in the Speaker menu (page 30).

 

Tags

Quadraverb GT DR-4800PM BDP-LX70 SCH-R500 System 27LB220B4 Lexmark X656 Master Moto U9 KAC-8403 KEX-P66R Presario 6000 HAC4PRO Taiwan A-X30 26000 RDR-VX500 Transfer 18M GA-X58a-ud3R Cdgt1 CD 560 CMT-A70 LA40B530 Pslx520 AL1731 Toshiba P500 Nokia 9300 81327 Evolis Rev 2 Samsung 901B Ascotel 200 R200-DB11Z 7155-7165-01 9-5 2003 P5B PRO HBN5045AUC US-1641 BD-S2900 X736DE Fantom X7 Addenda MDS-JA50ES 14PT1686 58S Kaossilator PRO Review ECR 2350 F-L Euro 46DH77e S SA-HT95 DTR320-00 DV350AEW XAA 732NW Amilo PI DVR-550HX-S NV-GS280EB FW350C KDC-308G ZE-NC2010 Focus 2001 DVD729-001 DI Moka HVL-HFL1 90093 Cyclonic Elyseo 125 ERS-7850B IC-F110 II Plus Sevilla MP38 Shield BDP-BX37 RX620 FAX-L800 Musso MDX1600 ACR 3230 Etrex GV-10 Roland FP-9 Classic 110 IC-F510 CP780 NB100 F50674 20099 MS9327E PV-GS9 Effects CS3 I810E2 KD-R302 Actionlaser 1100 PS-5000 H TC-14S2R -1999 Deluxe AR-M277 EF2280 KP-43T70 Corvette Z06 DVD-HD850B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101