3-870-414-41(1)

LCD Digital Color TV

Operating Instructions

KDL-40S4100 KDL-46S4100 KDL-52S4100

2008 Sony Corporation

Owners Record
The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

CAUTION

To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.
This Class B digital apparatus complies with Canadian ICES-003.

Safety

s s Operate the TV only on 120-240 V AC. Use the AC power cord specified by Sony and suitable for the voltage where you use it. The plug is designed, for safety purposes, to fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. If you will not be using the TV for several days, disconnect the power by pulling the plug itself. Never pull on the cord. For details concerning safety precautions, see Important Safety Instructions on page 3. The TV should be installed near an easily accessible power outlet. To prevent internal heat buildup, do not block the ventilation openings. Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. Avoid operating the TV at temperatures below 41F (5C). If the TV is transported directly from a cold to a warm location, or if the room temperature changes suddenly, the picture may be blurred or show poor color due to moisture condensation. In this case, please wait a few hours to let the moisture evaporate before turning on the TV. To obtain the best picture, do not expose the screen to direct illumination or direct sunlight. It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the TV in a room where the floor and walls are not of a reflective material.

Model Name Serial No.

Declaration of Conformity
Trade Name: SONY Model: KDL-40S4100/KDL-46S4100/ KDL-52S4100 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING

To reduce the risk of fire or electric shock, do not expose this TV to rain or moisture.

Installing

RISK OF ELECTRIC SHOCK DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR

NOTIFICATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s s s Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. s s

PRECAUCION

RIESGO DE CHOQUE ELECTRICO NO ABRIR
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the TVs enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the TV. The TV shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.
Use the following Sony TVs only with the following WALL-MOUNT BRACKET or TV-stand. Sony TV Model No. KDL-40S4100 KDL-46S4100 KDL-52S4100 Sony Wall-Mount Bracket Model No. Sony TV-Stand Model No. SU-WL500 WS-S10LS SU-FL71M
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Antenna lead-in wire Ground clamps Antenna discharge unit (NEC Section 810-20) Grounding conductors (NEC Section 810-21) Ground clamps Power service grounding electrode system (NEC Art 250 Part H)
Electric service equipment
Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Use with other WALL-MOUNT BRACKET or TV-stand may cause instability and possibly result in injury.

To Customers

Sufficient expertise is required for installing the specified TV. Be sure to subcontract the installation to Sony dealer or licensed contractors and pay adequate attention to safety during the installation.
NEC: National Electrical Code

For customer in Canada

This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider. Availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

Trademark Information

Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Blu-ray Disc is a trademark. BRAVIA, Sony Corporation. and are trademarks or registered trademarks of

Important Safety Instructions
1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
PLAYSTATION is a registered trademark and PS3 is a trademark of Sony Computer Entertainment Inc. It meets strict energy efficiency guidelines set by the EPA and US Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. When the TV is initially set up, it is designed to stay within the Energy Star guidelines. Changes to certain features, settings, and functionalities of this TV (i.e. Picture/Sound, Power Saving) can slightly change the power consumption. Depending upon such changed settings, the power consumption may increase which possibly could exceed the limits required for the Energy Star qualification.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

(Continued)

MOISTURE
To reduce the risk of fire or electric shock, do not expose this TV to rain or moisture. s The TV must never be exposed to dripping, splashing, or spilling liquids of any kind. s Do not place liquid filled objects such as a vase or potted plant on the TV. s Do not use a power line operated TV set near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, wet basement or near a swimming pool, etc.

ACCESSORIES

Keep small accessories out of childrens reach. Use only the specified accessories with this TV.

Volume Adjustment

s When using headphones, adjust the volume to avoid excessive audio levels from causing possible hearing loss.
s Do not allow anything to rest on or roll over the cord. s Before connecting cables, be sure to unplug the AC power cord for your safety. s Do not move the TV with the AC power cord (or other cables such as audio and video) connected. s Use only an original Sony AC power cord with your TV; no brand substitution is allowed. s Do not use AC power cord supplied with the TV with any other equipment.

BATTERIES

Your remote control batteries are consumables. s To preserve our environment, dispose of used batteries according to your local laws or regulations. s Do not dispose of batteries in a fire. s Do not short-circuit, disassemble or overheat the batteries. s Replace only with the same or equivalent type of batteries. Using incorrect replacement batteries can lead to an explosion.

LCD SCREEN

s Although the LCD screen is made with high-precision technology and has effective pixels of 99.99% or more, black dots or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction. s The LCD screen is made with high-precision technology and to achieve a high level of performance and picture quality, this TVs backlight setting is set to maximize the brightness of the TV. However, uneven brightness may be observed when the LCD TV is viewed in a dark ambient without an input source or blank screen. This condition is normal and not a malfunction of the TV. Changing the Picture mode, Backlight setting, or turning on the Power Management will improve this condition. s To avoid damaging the LCD panel, do not expose the LCD screen to direct sunlight. s Do not push or scratch the LCD screen, or place objects on top of the TV. The images may be uneven or the LCD panel may be damaged. s If the TV is used in a cold place, smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena improve as the temperature rises. s Ghosting may occur when still pictures are displayed continuously. It should disappear after a few moments. s The LCD screen and enclosure get warm when the TV is in use. This is not a malfunction. s Avoid spraying insect repellent with volatile material on the LCD screen. s Avoid prolonged contact with rubber or plastic material to the LCD screen.

IN 1 3

PR L L AUDIO R

L AUDIO R

L AUDIO R (FIX) DIGITAL AUDIO OUT (OPTICAL) AUDIO OUT
AUDIO-R (red) AUDIO-L (white)

Audio cable

If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. For details, see page 17.
Getting Started Shown with Component Connection
CATV/Satellite antenna cable Rear of TV
AUDIO-R (red) AUDIO-L (white) PR (red) PB (blue) Y (green) Component video cable
Use the TV as a monitor for your PC as shown below. Shown below is the HD15 to HD15 connection.
HD15-HD15 cable (analog RGB) Audio cable (stereo mini plugs)
Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog RGB) and audio cable (see page 18). If the PC is connected to the TV and no signal has been input from the PC for more than 30 seconds, the TV enters the standby mode automatically (see page 30). Do not connect a PC to the TVs HDMI input.

Other Equipment

Personal computer Blu-ray Disc Player/ PS3 DVD player Digital satellite Digital receiver cable box Audio system

SERVICE ONLY

VIDEO IN 2 VIDEO L

AUDIO R

PR L L AUDIO R AUDIO AUDIO PC IN

CABLE/ ANTENNA

2 VIDEO IN COMPONENT IN

CABLE/ANTENNA

VCR Game system

Digital recorder

Digital audio Analog audio equipment equipment (A/V Receiver/Home Theater)

Camcorder

Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
When Connecting to Optional Equipment

Left side

For service use only

2 S VIDEO

L AUDIO R AUDIO AUDIO PC IN

L AUDIO R (FIX)

L AUDIO R DIGITAL AUDIO OUT (OPTICAL) AUDIO OUT

R AUDIO R

Item Description

1 HDMI IN 2

6 HDMI IN 1 HDMI/ L-AUDIO-R 7 HDMI IN 3
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the L-AUDIO-R jacks of HDMI IN 1. (DVI connector is for video signals only.)

Wall-mount holes Anchor bolts Rope or chain Wall-anchor
Measure 2 provides minimal protection against the TV toppling over. For further protection, follow all three measures recommended above. If an electric screwdriver is used, set the torque to tighten at approximately 2.0 Nm {20 kgfcm}.
Bundling the Connecting Cables
You can bundle the connecting cables with the supplied cable band as illustrated below.

KDL-40/46S4100

KDL-52S4100
Do not bundle the AC power cord with other connecting cables.
Setting Up the Channel List - Initial Setup
After you finish connecting your TV, you need to run Initial Setup, which automatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel settings (see page 31).

1 Press

to turn on the TV.
Initial Setup Please select your language: English Espaol Franais
The Initial Setup screen appears.
2 Press V/v to highlight the desired

language and to select.

Initial Setup
3 The message First please connect
cable or antenna. Allow 50+ minutes for completion. and Start auto program now? appear, make sure you already connected cable or antenna, then select OK to start Auto Program. If you want to start Auto Program later, select Cancel.
First please connect cable or antenna. Allow 50+ minutes for completion. Start auto program now? OK Cancel
If you have cable and antenna available, please connect cable first.
4 The scanning of channels will start. If
you want to stop and run Auto Program later, select Cancel.
Initial Setup Analog Channels Found: Digital Channels Found: 0 0
5 When Auto Program is complete,

press to continue.

Searching. Please wait. Allow 50+ minutes for completion. Press to cancel. Cancel
6 If the Initial Setup programming
found cable channels, you will be able Initial Setup to scan antenna channels as well. If you want to use air signals, please connect antenna. Connect the antenna using an A-B RF Allow 50+ minutes for completion. switch (not supplied) and change the OK Cancel switch to antenna then start Auto Program to search antenna channels. If the Initial Setup programming found antenna channels, the Auto Program process will finish. If you want to scan cable channels, you can do it later using the Channel settings.
To run Auto Program again at a later time
Use the Auto Program feature as described on page 31. Select the proper Wide Mode as described on pages 24 and 29.

To display the Picture in your Preferred Aspect Ratio

Remote Control

Button Description

1 DISPLAY

2 SLEEP

3 FAVORITES

Press once to display the current channel number, channel label, program remaining time and Wide Mode. The onscreen display (OSD) will turn off after a few seconds. Press repeatedly until the TV displays the time in minutes (Off, 15, 30, 45, 60, 90 or 120) that you want the TV to remain on before shutting off. To cancel Sleep Timer, press SLEEP repeatedly until Off appears. Press once to display the stored Favorites list. You can store up to 8 channels and/or external inputs in your Favorites list. How to Add to Favorites While tuned to the channel you want to add to the list, press FAVORITES and highlight Add to Favorites, then press. Your Favorites list will be cleared each time you run Auto Program (see pages 22 and 31 for Auto Program). Press repeatedly to cycle through the available picture modes: Vivid, Standard, Custom. The picture modes can also be accessed in the Picture settings. For details, see Using the Picture Settings on page 27. Press to go back to the previous screen when displaying MENU items and settings. Press to display the MENU with TV functions and settings. See Overview of MENU on page 27. Press to turn on and off Closed Captions (CC). To change or customize CC Display, see page 36. Use with 0-9 and ENT buttons to select digital channels. For example, to enter 2.1, press 2 , , 1 and ENT. Press to adjust the volume. Press to mute the sound. Press again or press VOL + to restore the sound.

4 PICTURE

5 RETURN 6 MENU

7 CC VOL +/ 0 MUTING

z The 5 button and CH + have a tactile dot. Use them as a reference when operating the TV.

qa POWER qs WIDE

Press to turn on and off the TV. Press repeatedly to step through the Wide Mode settings: Wide Zoom, Normal, Full, and Zoom. The Wide Mode settings can also be accessed in the Screen settings. (See page 29.) Changing the Wide Screen Mode
(For PC timing, see below)
4:3 Original source Standard-definition source 16:9 Original source High-definition source

m Wide Zoom

Normal
Normal This mode is not available. Full
Normal is not available when you are watching a 720p, 1080i or 1080p source. Changing the Wide Screen Mode for PC Timing Incoming PC signal Incoming PC signal

1280 768

m Normal

Full 1

Full 2

qd INPUT

Press to display the list of external inputs. Press repeatedly to toggle through the inputs. Inputs can be changed by pressing V/v and while the list of external inputs is displayed. Basic Operations See page 35 for information about setting up the external inputs labels, including the Skip feature. Press V/v/B/b to move the on-screen cursor. Press to select/confirm an item. Press to display the Tools Menu that is associated with your current input: analog TV, digital TV or external inputs. (See pages 27, 28, 32 and 36.) While in PC input mode, PIP can be selected from the Tools Menu. The PIP feature allows the viewer to see both PC input and TV channels simultaneously.

qd qf qg

qf V/v/B/b qg TOOLS

Main Window (PC)

Sub Window (TV channel)
For compatible PC Timings, refer to the PC Input Signal Reference Chart (see page 41).
To Change Channels in the PIP Window Press CH +/ to change the channel or enter the channel number using the 0-9 numeric buttons. You may also press JUMP to return to the previously viewed channel. To Exit from PIP Press TOOLS. Press V/v to highlight Exit PIP and press to exit. You may also press RETURN to exit this feature. Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. Press 0 - 9 to select a channel; the channel changes after two seconds. Press ENT to change channels immediately. Press to scan through channels. To scan quickly through channels, press and hold down either +/.

qh JUMP

qj 0 - 9 ENT qk CH +/
Insert two size AA batteries (supplied) by matching the e and E on the batteries to the diagram inside the remote controls battery compartment.

TV Controls

VOLUME

CHANNEL

TIMER STANDBY POWER

1 MENU 2 INPUT

Press to display MENU with TV functions and settings (see Overview of MENU on page 27). Press to display the list of external inputs. Press repeatedly to toggle through the inputs. Inputs can be changed by pressing V/v and while the list of external inputs is displayed. See page 35 for information about setting up the external inputs labels, including the Skip feature. In the MENU screen, this button serves as confirming the selection or setting.
3 VOLUME + 4 CHANNEL + 5 POWER 6 TIMER LED 7 STANDBY LED 8 POWER LED 9 (IR) Infrared Receiver 0 Speaker
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons. Press to scan through channels. To scan quickly through channels, press and hold down either /+. In the MENU screen, these buttons serve as up/down buttons. Press to turn on and off the TV. Lights up in orange when the sleep timer is set. Lights up in red when your TV is in PC power saving mode. Lights up in green when the TV is turned on. Receives IR signals from the remote control. Outputs audio signal. The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV. Make sure that the TV is completely switched off before unplugging the power cord.

Select to display in the original image size. Select to enlarge the picture to fill the display area, keeping its original aspect ratio. Full2 Select to enlarge the picture to fill the display area. Select to automatically adjust the display position and phase of the picture when the TV receives an input signal from the connected PC. Note that Auto Adjustment may not work well with certain input signals. In such cases, manually adjust the options below. Adjust after Pitch to fine tune overall sharpness. Adjust uneven sharpness on screen. For the PC Input Signal Reference Chart, see page 41. Allows you to move the position of the picture left and right. Allows you to move the position of the picture up and down. On Select to automatically switch to the power saving mode when there is no signal input for 30 seconds. Off Select to turn off Power Management. Power Management is not VESA-compliant.
Using the Channel Settings
Channel Favorites Cable Digital Channels Auto Program Show/Hide Channels Label Channels Diagnostics On

Favorites Cable

Digital Channels Auto Program

Show/Hide Channels

Select favorite channels and external inputs (see page 23). On Select if you are receiving cable channels via Cable TV provider. Off Select if you are using an antenna. You should run Auto Program after changing the Cable setting. Select to add digital channels. Automatically sets up the channel list on the TV for all receivable channels. 1 Select Auto Program. 2 Select OK to start Auto Program. Running Auto Program will clear Favorites list. Allows you to show or hide channels that appear when you use the CH +/ buttons. 1 Press V/v to scroll through the channels until you find the channel you want to show or hide. Then press to select it. 2 Press V/v to determine if the channel will be shown or hidden. Then press to select it. Channels that you set to be hidden can be accessed only with the 0-9 buttons. You can set channels to be hidden that are automatically set in Auto Program. Allows you to assign labels (such as station call letters) to channel numbers. 1 Press V/v to scroll through the channel numbers. Then press to select the channel number that you want to assign a label. 2 Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to the next character. Repeat to add up to 7 characters to the label. Press b to highlight OK and press to set. Display diagnostics information about the TV. This can be useful in providing information to an authorized technician or repair person.

Label Channels

Diagnostics
Using the Parental Lock Settings
The Parental Lock settings allows you to set up the TV to block programs according to their content and rating levels. Use 0-9 on the remote control to enter a four-digit password. The first time you create a password, confirm the password by entering it again.

US Models: Selecting Custom Parental Lock Rating Options
To select custom rating options for the U.S., select U.S.A. in the Select Country setting (see above).

Movie Rating

G PG PG-13 R
NC-17 and X TV Rating Age-Based Ratings Block programs by their TV-Y All children. rating, content or both TV-Y7 Directed to children age 7 and older. TV-G General audience. TV-PG Parental guidance suggested. TV-14 Parents strongly cautioned. TV-MA Mature audience only. Content-Based Ratings FV Fantasy violence. D Suggestive dialogue. L Strong language. S Sexual situations. V Violence. To ensure maximum blocking capability, set the Age-Based Ratings.
All children and general audience. Parental guidance suggested. Parental guidance for children under 13. Restricted viewing, parental guidance is suggested for children under 17. No one 17 or under allowed.
Canadian Models: Selecting Custom Parental Lock Rating Options
To select custom rating options for Canada, select Canada in the Select Country setting (see page 33).

English Rating

French Rating

U.S.A. Rating

C All children. C8+ Children 8 years and older. G General programming. PG Parental guidance. 14+ Viewers 14 and older. 18+ Adult programming. G General programming. Not recommended for young children. 8 ans+ 13 ans+ Not recommended for ages under 13. 16 ans+ Not recommended for ages under 16. 18 ans+ Programming restricted to adults. See US Models on page 33 for details.

Viewing Blocked Programs

You can view blocked programs by entering the password. Press ENT when tuned to a blocked program, then enter the password. This temporarily turns the parental control feature off. To reactivate the Parental Lock settings, turn off the TV. When the TV is turned on again, your Parental Lock settings are reactivated.

Using the Setup Settings

Setup Closed Captions (CC) Info Banner Label Video Inputs Language Sleep Timer Power Saving Product Information CineMotion Off English Off Off Off On

Closed Captions (CC)

Info Banner

Label Video Inputs

Allows you to select from several closed caption modes (for programs that are broadcast with closed captioning). On Closed Captions (CC) is turned on. Off Closed Captions (CC) is turned off. Program Allows you to set basic and advanced Closed Captions (CC) options. See Programming Closed Captions (CC) on page 36. You can also access Closed Captions (CC) by using the CC button on the remote control when in analog TV, digital TV and external inputs (with the exception of PC input). Set to On or Off. When on, displays the program description and the remaining time (if the broadcaster offers this service). Displays for a few seconds when the channel is changed or the DISPLAY button is pressed. Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc. For example, if you have a DVD player connected to the COMPONENT IN jack, you can select the label DVD for the Component input. Then when you press INPUT to change inputs, the video label you assigned to that input appears on screen. 1 Press V/v to highlight the video input (Video 1-2, Component 1-2, HDMI 1-3, PC) to which you want to assign a label. Then press to select the input. 2 Press V/v to highlight one of the displayed labels. Then press to select the label. You can select from the following labels for each input: Video 1-2 , DVD, VCR, Blu-ray, Cable Box, Satellite, DVR, Game, Camcorder, Skip Component 1-2 , DVD, VCR, Blu-ray, Cable Box, Satellite, DVR, Game, Camcorder, Skip HDMI 1-3 , DVD, VCR, Blu-ray, Cable Box, Satellite, DVR, Game, Camcorder, Skip PC , Skip If you select Skip, your TV skips this input when you press the INPUT button.

1280 1360

VESA VESA VESA CEA-861*

SXGA HDTV
This TVs PC input does not support Sync on Green or Composite Sync. This TVs PC VGA input does not support interlaced signals. Your PC must support one of the above PC input signals to display on the television. For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency. In plug and play, signals with a 60Hz vertical frequency will be detected automatically. (PC reboot may be necessary.)
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. This affects Picture settings, Wide Mode settings, and PIP function. To view PC content set Picture Mode to Custom, Wide Mode to Full, and Display Area to Full Pixel.

Specifications

Television system: NTSC ATSC (8VSB terrestrial) QAM on cable
American TV standard ATSC compliant 8VSB ANSI/SCTE (Does not include CableCARD functionality) Analog Digital Channel coverage: Terrestrial 2-69 2-69 Cable 1-135 1-135 Antenna: 75-ohm external terminal for VHF/UHF

Speaker output:

10 W + 10 W

Power consumption:

KDL-40S4100: in use 210 W in standby less than 1.0 W KDL-46S4100: in use 260 W in standby less than 1.0 W KDL-52S4100: in use 295 W in standby less than 1.0 W

Panel System:

LCD (Liquid Crystal Display) Panel

Dimensions:

KDL-40S4100 with stand: (in mm) 276 (in inches) 39 3/1/7/8 without stand: (in mm) 111 (in inches) 39 3/3/3/8 Wall-mount hole pattern: (in mm) Wall-Mount screw size: (in mm) M6 (length: refer to diagram on page 39) KDL-46S4100 with stand: (in mm) 308 (in inches) 44 1/7/1/4 without stand: (in mm) 115 (in inches) 44 1/3/5/8 Wall-mount hole pattern: (in mm) Wall-Mount screw size: (in mm) M6 (length: refer to diagram on page 39) KDL-52S4100 with stand: (in mm) 346 (in inches) 50 1/3/5/8 without stand: (in mm) 119 (in inches) 50 1/7/3/4 Wall-mount hole pattern: (in mm) Wall-Mount screw size: (in mm) M6 (length: refer to diagram on page 39)
Display resolution (horizontal vertical):

1,920 dots 1,080 lines

VIDEO IN 1/2:
S VIDEO (4-pin mini DIN) (VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative C: 0.286 Vp-p (Burst signal), 75 ohms VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (100% modulation) Impedance: 47 kilohms

COMPONENT IN 1/2:

YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms Signal format: 480i, 480p, 720p, 1080i, 1080p AUDIO: 500 mVrms (100% modulation) Impedance: 47 kilohms

HDMI IN 1/2/3:

Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits AUDIO (HDMI IN 1 only): 500 mVrms (100% modulation) Impedance: 47 kilohms HDMI:

AUDIO OUT:

500 mVrms (100% modulation) More than 500 mVrms (Fixed)
DIGITAL AUDIO OUT (OPTICAL):
Optical Digital Audio Output (PCM/Dolby Digital)

PC IN:

Analog RGB (D-sub 15-pin): 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Reference Chart on page 41 AUDIO (Stereo mini jack): 500 mVrms Impedance: 47 kilohms
KDL-40S4100 with stand: (in kg.) (in lb.) without stand: (in kg.) (in lb.) KDL-46S4100 with stand: (in kg.) (in lb.) without stand: (in kg.) (in lb.) KDL-52S4100 with stand: (in kg.) (in lb.) without stand: (in kg.) (in lb.) 22.lb 1 oz 19.lb 14 oz

Power Requirement:

120 V-240 V AC, 50/60 Hz

Screen size (in inches):

40, 46, 52

30.lb 3 oz 26.lb 7 oz

Speaker/Full range (2):
KDL-40S4100: (in mm) (in inches) KDL-46S4100: (in mm) (in inches) KDL-52S4100: (in mm) (in inches) 57.2 3/2 5/7/5/7/8

38.lb 4 oz 32.lb 5 oz

Supplied accessories:
Remote control RM-YD025 (1) Size AA batteries (2) AC power cord (1) Table-Top Stand (1) (For KDL-40/46S4100) Screws (4) (For KDL-40/46S4100) Cable band (1) Operating Instructions (1) Quick Setup Guide (1) Warranty Card (1)

Optional accessories:

Connecting cables Support belt kit Wall-Mount Bracket: SU-WL500 TV-Stand: SU-FL71M (for KDL-40/46S4100), WS-S10LS (for KDL-40/46S4100)
Optional accessories availability depends on its stock.
Design and specifications are subject to change without notice.
0-9 buttons 25 4:3 Default 29
Info Banner 35 Infrared Receiver (IR) 26 INPUT button 25, 26 Installing the TV on a wall 39
TIMER LED 26 TOOLS button 25 Treble 28 Troubleshooting 37, 38 TV Rating 33
AC IN 18 Advanced 36 Advanced Settings 36 Alternate Audio 28 AUDIO OUT jack, described 18 Auto Adjustment 30 Auto Program 22, 31 Auto Wide 29

JUMP button 25

U.S.A. Rating 34 Unrated 32
Label Channels 31 Label Video Inputs 35 Language 35
Vertical Center 29, 30 Vertical Size 29 VIDEO/AUDIO (L/R) jacks, described Viewing Blocked Programs 34 VOL+/ button 23, 26
Backlight 27 Balance 28 Basic 36 Bass 28 Brightness 27
MENU button 23, 26 Movie Rating 33 MTS 28 MUTING button 23

17, 18

Cable 31 CABLE/ANTENNA input, described 18 CC button 23 CH+/ button 25, 26 Change Password 33 Channel Block 32 Channels Creating labels 35 Setting up 22 CineMotion 36 Closed caption modes 36 Closed Captions (CC) 35 Color 27 Color Temp 27 COMPONENT IN (1080p/1080i/720p/480p/480i) 18

KDL40S4100 Sony 40 LCD TV Product Information Guide Features:
HDTV w/ Built in ATSC tuner Full 1080p panel resolution 10 bit 16:9 HD panel VESA compliant 3HDMI

Specifications:

Parts & Accessories Description Remote (RM-YD025) AC Cord Owners Manual Front Bezel Rear cabinet
Part Number X-2318-168-1 1-834-069-21 3-870-414-11 X-2318-166-1 X-2318-785-1
Weight: 40.7 lbs. Dimensions: 39.3 x 25.6 x 4.5 without stand Analog Audio Input(s) : 5 (4 Rear/1 Side) Audio Out (Variable/Fixed) : 1 (Rear) Component Video (Y/Pb/Pr ) Input(s) : 2 (Rear) Composite Video Input(s) : 3 (2 Rear/1 Side) Digital Audio Output(s) : 1 (Rear) S-Video Input(s) : 1 (Rear) Headphone Output(s) : 1 (Side) PC Audio Input(s) : 1 (Rear) PC Video Input(s) : 1 (Rear) with D-sub 15 and L/R stereo mini plug connection4 HDMI Connection(s) : 3 rear input Viewing Angle: 178/178 Dynamic Contrast Ratio: 13,000:1 Response time: 8 ms
This model replaced KDL-40V3000 for MY 2009