3-219-178-14(1)

LCD Digital Colour TV

Operating Instructions

Before operating the TV, please read the Safety information section of this manual. Retain this manual for future reference.
KDL-70X3500 KDL-52X3500 KDL-46X3500 KDL-46X3000 KDL-40X3500 KDL-40X3000
For useful information about Sony products

2007 Sony Corporation

Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. For KDL-70X3500 Users Refer to KDL-70X3500 Start-up Guide for details about the installation.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Notice for Digital TV function NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and MPEG4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. The cable provider may charge an additional fee for such services and you may be required to agree to their terms and conditions of business. Although this TV set follows DVB-T and DVB-C specifications, compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Some Digital TV functions may not be available in some countries/regions and DVB-C cable may not operate correctly with some providers. For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/DVBC/

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

Trademark information

is a registered trademark of the DVB Project HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Adobe is a registered trademark or a trademark of Adobe Systems Incorporated in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Disposal of the TV set

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
The illustrations used in this manual are of the KDL40X3500 unless otherwise stated.

Table of Contents

Start-up Guide 4
Safety information....9 Precautions.....11 Overview of the remote....12 Overview of the TV buttons and indicators..14

Watching TV

Watching TV....15 Using the Digital Electronic Programme Guide (EPG)..17 Using the Digital Favourite list...19

Using Optional Equipment

Connecting optional equipment....20 Viewing pictures from the connected equipment...22 Using the remote....23 Using USB photo viewer....26 Using HDMI control.....26

Using Menu Functions

Navigating through menus....27 Picture menu.....28 Sound menu....30 Screen menu (except for PC input)....32 Screen menu (for PC input)....33 Video Settings menu....34 Audio Settings menu....36 Set-up menu....37 Analogue Set-up menu....40 Digital Set-up menu....43

Additional Information

Specifications....46 Cleaning.....48 Troubleshooting.....48
: for digital channels only

Start-up Guide

1: Checking the accessories
Mains lead (Type BF)* (1) Coaxial cable* (1) PC cable* (1) Support belt (1) and screws (2) Stand (1) and screws (4) (only for KDL-46X3500/ 40X3500/46X3000/40X3000) Remote RM-ED010 (1) Size AA batteries (R6 type) (2)
* Do not remove the ferrite cores.
2: Attaching the stand (except for KDL70X3500/52X3500)
To insert batteries into the remote

Push and slide to open.

Observe the correct polarity when inserting batteries. Do not use different types of batteries together or mix old and new batteries. Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority. Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

To tune the TV for digital cable connection
If the country/region which you want to use on the TV does not appear in the list, select instead of a country/region.
Press F/f to select Scan Type, then press. Press F/f to select Quick Scan or Full Scan, then press.
Quick Scan: Channels are tuned according to the cable providers information within the broadcast signal. The recommended setting for Frequency, Network ID and Symbol Rate is Auto unless your cable provider has supplied actual values to use. Quick Scan is recommended for fast tuning when this is supported by your cable provider. Full Scan: All available channels are tuned and stored. This procedure may take some time. This option is recommended when Quick Scan is not supported by your cable provider. For further information about supported cable providers, refer to the support web site: http://support.sony-europe.com/TV/DVBC/

Auto tuning the TV

Before you start auto tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 5) and start play back.
The video channel will be located and stored on the TV during auto tuning. If no VCR is connected to the TV, skip this step.
Press G/g to select OK, then press
Press G/g/f to select Start, then press.
The TV starts searching for channels. Do not press any buttons on the TV or remote.
Press F/f to select Antenna or Cable, then press.
If you select Cable, the screen for selecting the scan type appears. See To tune the TV for digital cable connection on page 7.
Some cable providers do not support Quick Scan. If no channels are detected using Quick Scan, perform Full Scan.
Detaching the TableTop Stand from the TV
Do not remove the Table-Top Stand for any reason other than to wall-mount the TV or to attach the optional TV stand.

Installed on the wall

Safety information

30 cm 10 cm

Installation/Set-up
Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation
The TV set should be installed near an easily accessible mains socket. Place the TV set on a stable, level surface. Only qualified service personnel should carry out wall installations. For safety reasons, it is strongly recommended that you use Sony accessories, including: KDL-52X3500/46X3500/40X3500/46X3000/40X3000: Wall-mount bracket SU-WL500 KDL-52X3500/46X3500/40X3500/46X3000/40X3000: Floor stand SU-FL62
10 cm Leave at least this space around the set.

Installed with stand

30 cm 10 cm 10 cm 6 cm
Leave at least this space around the set.
To ensure proper ventilation and prevent the collection of dirt or dust: Do not lay the TV set flat, install upside down, backwards, or sideways. Do not place the TV set on a shelf, rug, bed or in a closet. Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. Do not install the TV set as shown below.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location:
Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from mains socket and aerial during lightning storms.

Broken pieces:

Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury. If the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result.

When not in use

If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons. As the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to disconnect the TV set completely. However, some TV sets may have features that require the TV set to be left in standby to work correctly. The instructions in this manual will inform you if this applies.

Precautions

Viewing the TV
View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes. When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction. Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged. If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises. Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments. The screen and cabinet get warm when this TV set is in use. This is not a malfunction. The LCD screen contains a small amount of liquid crystal and mercury. The fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.

You can also jump directly to a page by selecting the page number displayed on the screen. Press and F/f/G/g to select the page number, then press. When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page.
Some characters and/or letters at the top and the bottom of the picture may not be visible in Smart. In such a case, you can select Vertical Size using the Screen menu and adjust vertical size to make it visible.
When Auto Format is set to On, the TV will automatically select the best mode to suit the broadcast (page 32). You can adjust the position of the picture when selecting Smart (50Hz), Zoom or 14:9. Press F/f to move up or down (e.g. to read subtitles). Select Smart or Zoom to adjust for 720p, 1080i or 1080p source pictures with edge portions cut off.
To change the screen format manually to suit the broadcast
Press repeatedly to select the desired screen format. Smart* Displays conventional 4:3 broadcasts with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen. 4:3 Displays conventional 4:3 broadcasts (e.g. non-wide screen TV) in the correct proportions.

Using the Tools menu

Press TOOLS to display the following options when viewing a TV programme. Options
Close Picture Mode Sound Mode Motion Enhancer Speaker PAP Audio Language (in digital mode only) Subtitle Setting (in digital mode only) Digital Favourites (in digital mode only)

Description

Closes the Tools menu. See page 28. See page 30. See page 34. See page 36. See page 22. See page 44. See page 43. See page 19. See page 36. See page 37. See page 38. Allows you to switch to digital mode and obtain the time.
Wide Displays wide screen (16:9) broadcasts in the correct proportions.
i Volume Sleep Timer Power Saving
Zoom* Displays cinemascopic (letter box format) broadcasts in the correct proportions.
Auto Clock Set (in analogue mode only)
System Information (in Displays the system digital mode only) information screen.
Using the Digital Electronic Programme Guide (EPG) *
In digital mode, press. Perform the desired operation as shown in the following table or displayed on the screen.
Digital Electronic Programme Guide (EPG)
* This function may not be available in some countries/regions.
Watch a programme Turn off the EPG Sort the programme information by category Category list

Do this

Press F/f/G/g to select the programme, then press Press.
1 Press the blue button. 2 Press F/f to select a category, then press
The categories available include: All Categories, Radio: Contains all available channels. Other category name (e.g. News): Contains all programmes corresponding to the selected category.

Set a programme to be recorded Timer REC
1 Press F/f/G/g to select the programme you want to record, then press /. 2 Press F/f to select Timer REC. 3 Press to set the TV and your VCR timers.
A red c symbol appears by that programmes information. The indicator on the TV front panel lights up in orange. z
The above procedure can be used even if the programme to be recorded has already started.
Set a programme to be displayed automatically on the screen when it starts Reminder
1 Press F/f/G/g to select the future programme you want to display, then press /. 2 Press F/f to select Reminder, then press.
A c symbol appears by that programmes information. The indicator on the TV front panel lights up in orange. ~ If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start.
Set the time and date of a programme you want to record Manual timer REC
Do this Press /. Press F/f to select Manual timer REC, then press. Press F/f to select the date, then press g. Set the start and stop time in the same way as in step 3. Press F/f to select the programme, then press. Press to set the TV and your VCR timers.
The indicator on the TV front panel lights up in orange.
Cancel a recording/reminder Timer list
1 Press /. 2 Press F/f to select Timer list, then press. 3 Press F/f to select the programme you want to cancel, then press. 4 Press F/f to select Cancel Timer, then press.
A display appears to confirm that you want to cancel the programme.
5 Press G/g to select Yes, then press

to confirm.

You can set VCR timer recording on the TV only for SmartLink compatible VCRs. If your VCR is not SmartLink compatible, a message will be displayed to remind you to set your VCR timer. Once a recording has begun, you can switch the TV to standby mode, but do not turn off the TV completely or the recording will be cancelled. If an age restriction for programmes has been selected, a message asking for a PIN code will appear on the screen. For details, see Parental Lock on page 44.
Using the Digital Favourite list

Digital Favourite list

The Favourite feature allows you to specify up to four lists of your favourite programmes.
Press MENU. Press F/f to select Digital Favourites, then press.
Perform the desired operation as shown in the following table or displayed on the screen.
Create your Favourite list for the first time
Do this 1 Press to select Yes. 2 Press the yellow button to select the Favourite list. 3 Press F/f to select the channel you want to add, then press

Connect a supported USB device to the TV. Press MENU. Press F/f to select Photo, then press
The thumbnail screen appears.
Press F/f/G/g to select the photograph or folder you want to view, and then press.
If you want to view a slide show, press G/f to select Slide Show, then press.
To connect the HDMI control compatible equipment
Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. For details, see page 20.

Advanced operations

Press G/f to select an option, then press Options
Device Selection Picture Settings
Select the device if multiple devices are connected. You can make Backlight (page 28), Contrast (page 28) and Colour Temperature settings. You can make advanced settings for the slide show and set the display sequence for the thumbnails.
To make the HDMI control settings
HDMI control must be set on both the TV side and the connected equipment side. See HDMI Set-up on page 38 for the TV side settings. See the operating instructions of the connected equipment for setting details.

Set-up

HDMI control functions
Turns the connected equipment automatically off when you turn the TV off. Turns the TV on and automatically switches the input to the connected equipment when the equipment starts to play. If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. Adjusts the volume and mutes the sound of a connected audio system.
USB photo viewer only supports DCF-compliant JPEG photographs. Set the cameras USB connection mode to Auto or Mass Storage mode when you are connecting Sony digital still camera. For more information about USB connection mode, see the instructions supplied with the device that you use. Do not turn off the TV or connected USB device, or disconnect the USB cable or remove the recording media while the data on the recording media is being accessed. The data on the recording media may be damaged. Using unsupported USB device is not guaranteed and may cause malfunctions. Sony cannot be held liable for any damage to or loss of data on the recording media due to a malfunction of any connected devices or the TV. Check the website below for the up to date information about compatible USB devices. http://support.sony-europe.com/TV/compatibility/

4 Digital EPG*

Displays the Digital Electronic Programme Guide (EPG) (page 17).

Sound menu

You can select the options listed below on the Sound menu. To select options in Settings, refer to Navigating through menus (page 27).

Sound Mode

Dynamic: Enhances treble and bass. Standard: For standard sound. Recommended for home entertainment. Custom: Flat response. Also allows you to store your preferred settings. Resets all the Sound settings except Target Inputs, Sound Mode and Dual Sound to the factory settings. Adjusts higher-pitched sounds. Adjusts lower-pitched sounds. Emphasizes left or right speaker balance. Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend to be louder than programmes). Adjusts the volume level of the current input relative to other inputs, when Target Inputs is set to the current input name (e.g. AV1). S-FORCE Front Surround: Available for normal stereo broadcast and 5.1ch digital broadcast surround audio, and the audio input from connected equipment. Off: Converts and reproduces 5.1ch and other digital broadcast surround audio as normal stereo audio (2ch). Reproduces the original audio of other broadcasts as is.
Reset Treble Bass Balance Auto Volume Volume Offset Surround

Voice Zoom

Adjusts the clarity of human voices. For example, if the voice of a news announcer is indistinct, you can turn up this setting to make the voice clearer. Conversely, if you are watching a sports programme, you can turn down this setting to soften the voice of the commentator. Gives sound more impact by compensating for phase effects in speakers. Selects the sound from the speaker for a stereo or bilingual broadcast. Stereo/Mono: For a stereo broadcast. A/B/Mono: For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available.
If you select other equipment connected to the TV, set Dual Sound to Stereo, A or B. However, when the external equipment connected to the HDMI socket is selected, this is fixed to Stereo (except when using the audio in sockets).

Sound Booster Dual Sound

Screen menu (except for PC input)
You can select the options listed below on the Screen menu. To select options in Settings, refer to Navigating through menus (page 27).
The selectable items are Screen Format, Display Area, Vertical Shift and Vertical Size.

B/G: For western European countries/regions I: For the United Kingdom D/K: For eastern European countries/regions L: For France
5 Press F/f to select Channel, then press. 6 Press F/f to select S (for cable channels) or C (for terrestrial channels), then press g.
S is not available when United Kingdom is selected for Country (page 7).
7 Tune the channels as follows: If you do not know the channel number (frequency)
Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number.
8 Press to jump to Confirm, then press. 9 Press f to select OK, then press. Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 2 to 4 of Programme Labels (page 40). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of 15 to +15. When On is selected, the fine tuning is performed automatically. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting Off.
You cannot receive stereo or dual sound when Low or High is selected.
Skip Skips unused analogue channels when you press PROG +/ to select channels. (You can still select a skipped channel using the number buttons.)
Decoder Shows and records the scrambled channel selected when using a decoder connected directly to scart connector / 1, or to scart connector / 2 via a VCR.

Subtitle Set-up

Subtitle Setting: When For Hard Of Hearing is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information). Subtitle Language: Selects which language subtitles are displayed in.

Audio Set-up

Audio Type: Switches to broadcast for the hearing impaired when For Hard Of Hearing is selected. Audio Language: Selects the language used for a programme. Some digital channels may broadcast several audio languages for a programme. Audio Description: Provides audio description (narration) of visual information, if TV channels broadcast such information. Mixing Level: Adjusts the TV main audio and Audio Description output levels. Dynamic Range: Compensates for differences in the audio level between different channels. Note that this function may have no effect for some channels. Optical Out: Selects the audio signal that is output from the DIGITAL OUT (OPTICAL) terminal on the rear of the TV. Set to Auto when equipment compatible with Dolby Digital is connected, and set to PCM when non-compatible equipment is connected. Basic: Displays programme information with a digital banner. Full: Displays programme information with a digital banner, and displays detailed programme information below that banner. The screen wallpaper is displayed when listening to a radio broadcast. You can select the screen wallpaper colour, or display a random colour. To cancel the screen wallpaper display temporarily, press any button. Sets an age restriction for programmes. Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly. 1 Press the number buttons to enter your existing PIN code.
If you have not previously set a PIN, a PIN code entry screen appears. Follow the instructions of PIN Code below.

Banner Mode

Radio Display

Parental Lock

2 Press F/f to select the age restriction or None (for unrestricted watching), then press. 3 Press RETURN.

PIN Code

To set your PIN for the first time 1 Press the number buttons to enter the new PIN code. 2 Press RETURN. To change your PIN 1 Press the number buttons to enter your existing PIN code. 2 Press the number buttons to enter the new PIN code. 3 Press RETURN.

Ventilation holes

Press 1 on the right side of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

No picture (screen is dark) and no sound Check the aerial/cable connection. Connect the TV to the mains, and press 1 on the right side of the TV. If the 1 (standby) indicator lights up in red, press TV "/1. No picture or no menu information from equipment connected to the scart connector Press / to display the connected equipment list, then select the desired input. Check the connection between the optional equipment and the TV. Double images or ghosting Check the aerial/cable connection. Check the aerial location and direction. Only snow and noise appear on the screen Check if the aerial is broken or bent. Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. When installing optional equipment, leave some space between the optional equipment and the TV. Make sure that the aerial/cable is connected using the supplied coaxial cable. Keep the aerial/cable TV cable away from other connecting cables. Picture or sound noise when viewing a TV channel Adjust AFT (Automatic Fine Tuning) to obtain better picture reception (page 41).
Some tiny black points and/or bright points appear on the screen The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes Select Reset (page 28). No colour or irregular colour when viewing a signal from the 3 or 4 sockets Check the connection of the 3 or 4 sockets and check if each sockets are firmly seated in their respective sockets.
The Store Display Mode: On message appears on the screen Select All Reset in the Set-up menu (page 39). Not all channels are tuned for cable Check support website for cable provide information. http://support.sony-europe.com/TV/DVBC/ The picture contours are disrupted Select Standard or Off in Motion Enhancer (page 34). You cannot select Off in HDMI Control. If any HDMI control compatible audio equipment is connected to the TV, you cannot select Off in this menu. If you want to change the audio output to the TV speaker, select TV Speaker in the Speaker menu (page 36).

No sound, but good picture Press 2 +/ or % (Mute). Check if the Speaker is set to TV Speaker (page 36). When using HDMI input with Super Audio CD or DVDAudio, DIGITAL OUT (Optical) may not provide audio signal. There is a whirring sound This is the sound of the internal fans of the TV (except for KDL-52X3500). This is not a malfunction.

Channels

The desired channel cannot be selected Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank Scrambled/Subscription only channel. Subscribe to the pay TV service. Channel is used only for data (no picture or sound). Contact the broadcaster for transmission details.
Digital channels are not displayed Contact a local installer to find out if digital transmissions are provided in your area. Upgrade to a higher gain aerial.

General

The TV turns off automatically (the TV enters standby mode) Check if the Sleep Timer is activated, or confirm the Duration setting of On Timer (page 37). If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. The TV turns on automatically Check if the On Timer is activated (page 37). Some input sources cannot be selected Select AV Preset and cancel Skip of the input source (page 37). The remote does not function Replace the batteries. A channel cannot be added to the Favourite list Up to 999 channels can be stored in the Favourite list.

Printed in Spain