Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall into the cabinet, do not operate the TV. Have it checked immediately by qualified personnel.
Do not open the cabinet and the rear cover of the TV. Refer to qualified service personnel only.
For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not cover the ventilation openings of the TV For ventilation, leave a space of at least 10cm all around the set.
Never place the TV in hot, humid or excessively dusty places. Do not install the TV where it may be exposed to mechanical vibrations.
To prevent fire, keep inflammable objects or naked lights (eg candles) away from the TV.
Clean the screen and cabinet with a soft, lightly dampened cloth. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine, or antistatic spray. As a safety precaution, unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not pull on the power lead itself.
Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV.
Place the TV on a secure stable stand. Never attempt to move the TV and stand together -always move the TV and stand separately. Do not place the TV on its side or face up. Do not allow children to climb on to it.
Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualified service personnel.
Do not cover the ventilation openings of the TV with items such as curtains or newspapers etc.
Additional Safety Information
Do not block or cover the ventilation opening situated on the bottom rear of the left hand side of the TV set. For ventilation, leave a space of at least 10 cm from the wall. If after transporting the TV set, directly from a cold to a warm location, or if the room temperature has changed suddenly, pictures may be blurred or show poor colour over portions of the picture. This is because condensation has formed on the mirrors or lenses inside the TV set. Let the moisture evaporate before using the TV set. To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed down from the ceiling. This TV set incorporates the latest high-precision LCD technology. Even though the highest standards are applied in manufacture it is still possible that a few black dots or bright points (red, green or blue) may be visible on the screen under certain picture conditions. It is not possible to remove them and this is not a fault condition. The screen of this TV set has an anti-reflection screen coating. To avoid screen degradation, follow the advice given below: To remove dust from the surface of the screen, wipe with the supplied cleaning cloth or a soft cloth. Clean the screen and cabinet with a soft, lightly dampened cloth. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine, or antistatic spray. As a safety precaution, unplug the TV before cleaning it. Avoid touching the screen, and take care not to scratch the surface with hard objects.

Checking the Accessories supplied

2 Batteries (AAA size)

2 Brackets

1 Hexagon key

1 PC input cable

2 Screws

1 Cleaning cloth
1 Remote control (RM-906)
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way.
Overview of Remote Control Buttons
wf wd ws wa w; ql qk qj qh qg qf qd q; TV I/ : To Temporarily Switch Off TV (standby mode): Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. After 15 minutes without TV signal and without any button being pressed, the TV switches automatically into standby mode. 2 VCR or DVD on/off: press this button to switch your VCR or DVD on or off. 3 Selecting input source: press this button repeatedly until the desired input symbol of the source appears on the TV screen. Refer to page 25. 4 Selecting broadcast channels: if Media Selector (w; is switched to TV, press these buttons to select channels. For double-digit programme numbers, enter the second digit within 2.5 seconds. 5 Selecting VCR double-digit: if Media Selector (w;) is switched to VCR, press this button to select double-digit channels for Sony's VCR e.g. 23, press -/-- first and next the buttons 2 and 3. 6 a) Recording button: If Media Selector (w;) is switched to VCR, press this button to record programmes. b) Resetting to factory set levels: Press, for a minimum of 3 seconds, to return the picture and sound settings to the factory default levels. This will also return the set to the install condition and the Auto Tuning menu will appear on the screen. If this is the case refer to the section Switching on the TV set and automatically Tuning (page 11, step 5) of this manual. 7 Watching last channel selected: if Media Selector (w;) is switched to TV, press this button to return to the previous channel you were watching (provided you watched it for at least 5 seconds). 8 Freezing a teletext page: in teletext mode, press this button to freeze a teletext page. Press it again to cancel the freeze. 9 a) Displaying a channel index: if Media Selector (w;) is switched to TV and MENU is switched off, press OK to display a channel overview. If you want to select a channel, press v or V next press again the OK button to watch the selected channel. b) Navigator: if Media Selector (w;) is switched to TV and MENU (qs) is switched on, use these buttons to navigate through the menu system of the TV. Refer to page 12. q; Selecting the screen format: press this button repeatedly to change the format of the screen. Refer to page 16. qa Selecting broadcast channels: press these buttons to select the next or previous broadcast channel. qs Menu system: press this button to enter the TV menu system. Refer to page 12. qd Adjusting volume: press these buttons to increase or decrease the audio volume. qf Selecting picture mode: press this button repeatedly to change the picture mode. For details on the different picture modes. Refer to page 13. qg Selecting the sound effect: Press this button repeatedly to change the sound effect. For details on different sound effects. Refer to page 14. qh Fastext: In Teletext mode, these buttons can be used as Fastext buttons. For details see page 22.

qj NexTView: press this button to display NexTView. For details. Refer to page 23. qk Teletext: press this button to switch on Teletext. For details see page 22. ql Operating VCR or DVD: if Media Selector (w;) is switched to VCR or DVD, these buttons will operate the main functions of your VCR or DVD, once the remote control has been programmed. Refer to page 26. w; Media Selector: press this button to select which device you want to operate, TV, VCR or DVD. A green light will be momentarily lit to show which one you have selected. For details refer to page 26. wa Displaying Info: press this button to display all onscreen indication such as channel number, etc. Press again to cancel. ws Selecting TV mode: press this button to switch off PAP, Teletext or Video input mode. wd PAP (Picture And Picture): press this button to divide the screen into two for watching two channels simultaneously. Refer to page 21. wf Muting the sound: press this button to mute the TV sound. Press again to restore the sound.
Overview of the TV Buttons
Remote control receiver To operate the remote control, pont it towards this receiver.
Programme Up or Down Buttons (Selects TV channels) Volume control buttons Push up the flap on the front left corner of the TV.

On/Off button

Selecting Input source
Power on indicator (green colour). Standby indicator (red colour). Power off indicator (amber colour). Lamp indicator (see page 28).
Headphones jack S video Input jack

Video Input jack

Audio Input jacks
Connecting the Aerial and VCR
Connecting cables are not supplied. For more details of VCR connections as well as other connections, please refer to page 24.

OUT IN

The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when using a VCR. If you do not use a Scart lead, you will need to manually tune the VCR to a spare channel once the autotune procedure has been completed. Refer to Manual Programme Preset on page 20. Also refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Stabilizing the TV set

After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.
1 Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.
Do not block or cover this ventilation opening. For ventilation, leave a space of at least 10 cm from the wall.
Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.

Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) Choose the country in which you are going to operate the TV, 3) check how to connect optional equipment to your TV, 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu).

Language

Select language
Connect the TV plug to the mains socket (220-240V AC, 50Hz) The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.
English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski

Language Select language

English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski
Press the V, v, B or b buttons on the remote control to select your language, then press the OK button to confirm your selection. From now on all the menus will appear in your chosen language.
The Country menu appears automatically. Press the v or V button to select the country in which you are using the TV. Press the OK button to confirm your selection. If the country in which you want to use the TV set does not appear in the list, select off instead of a country. To avoid wrong teletext characters for cyrillic languages we recommend selecting Russia country if your own country does not appear in the list.
Country Select country Off Ireland Nederland Belgi/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera

continued.

A diagram will appear showing you how to connect a wide range of equipment to your TV set. Follow the instructions and finally press the OK button to remove the picture and continue the automatic process. After the automatic tuning process has finished and the optional equipment has been connected at this stage, we recommend you follow the instructions explained on the section "Connection Guide" on page 17 to get the optimum settings related with the optional equipment.
Please connect your equipment according to this chart
5 The Auto Tuning menu appears on the screen. Press the OK

button to select Yes.

Do you want to start automatic tuning? Yes No
6 The TV starts to automatically search and store all
available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the v or V button and OK to store the channels. If no channels were found during the auto tune process, a message appears automatically on the screen asking you to connect the aerial. Check the aerial connection (refer to page 9). Press the OK button to restart the auto tuning process.

however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the Set Up menu as it is explained on page 18 and after selecting the "Manual Programme" option, press OK. Then select the AFT option and press b. Next press v or V to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: Once you have entered the "Set Up" menu as it is explained on page 18 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option highlighted, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press b. Next press v or V to select On. Finally press OK twice to confirm and store. To cancel this function afterwards, select Off instead of On in the step above.
e) View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart
3 directly or through a VCR.
This option is only available depending on the country you have selected in the Country menu. To do this: Once you have entered the "Set Up" menu as it is explained on page 18 and after selecting the "Manual Programme Preset" option, press OK. Next select the Decoder option and press b. Next press v or V to select On. Finally press OK twice to confirm and store. To cancel this function afterwards, select "Off" instead of "On" in the step above.
PAP (PICTURE AND PICTURE)
PAP divides the screen into two to watch two pictures in format 4:3 simultaneously.

Switching PAP on and off

to display PAP. One of the screens will be framed to indicate that this is the active screen. It means that when you want to select the PAP source, you will be doing it in the active screen.
Navegador Configuracin del Sistema

Aceptar

PROG+ PROG-
again to remove PAP. On the screen appears a banner guiding you how to operate PAP. This banner will disappear after some seconds but it always can be displayed again by pressing the button.

Versin

Move Frame
Changing the active screen This is only possible if Media Selector is set to TV. To change the active screen (framed), press the B or b buttons. Selecting PAP source

Horizontal viewing area

KF-42 S KF-50 X300K: 1.8 SX30 m and 0K KF-60 SX30 : 1.8 m a more n 0K: 2.2 m d more and m ore
(Optimum viewing position)

Vertical viewing area

KF-42 S KF-50 X300K: 1. 8 ma SX30 nd 0K KF-60 SX30 : 1.8 m a more nd mo 0K: 2.2 m and m re ore

Replacing the lamp

When the lamp becomes dark or the picture colour is not normal or the lamp indicator replace with a new lamp. on the TV set flashes, Only use the lamp XL-2100E for replacement. If you use another lamp, it may cause damage to the TV set. Do not remove the lamp except when replacing it. Before replacing the lamp, turn off the power and disconnect the power cord. Replace the lamp only after it becomes cool. The front glass of the lamp remains at least 100 C (212 F) even after the power has been turned off for 30 minutes. Do not place the old lamp in proximity to children or flammable material. Do not get the old lamp wet, or insert objects inside the lamp. It may cause the lamp to explode. Do not place the old lamp near easily flammable objects, as this may cause fire. Also, do not put your hand inside the lamp compartment, as you may be burned. Attach the new lamp securely. If it is not securely attached, the picture may become dark. Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass become dirty, the picture quality may deteriorate or the lamp life may shorten. Attach the lamp cover firmly. If it is not firmly attached, the power will not turn on. When the lamp burns out, a noise is audible. This does not indicate damage to the TV set. Consult your nearest Sony service center to obtain a new lamp. Always remember to dispose of used lamps in an evironmentally friendly way.
Turn off the power and disconnect the power cord. If you start changing the lamp without disconnecting the power cord, the standby indicator Disconnect the power cord to continue changing the lamp. Replace the lamp 30 minutes or more after the power is turned off to allow it to cool. Prepare the new lamp.

on the TV set flashes.

Loosen the two screws placed on the left and right corner of the rear of the TV with an object such as a coin.
Remove the front panel. Remove the front panel without moving the TV set
Grasp the left and right side of the front panel with your fingers and pull it forward. Be careful not to catch your fingernails.
Loosen the screw with an object such as a coin and remove the lamp cover.
Loosen the two screws and pull out the lamp.
Loosen two screws with the hexagon key supplied.
Pull out the lamp by the handle.
The lamp is still extremely hot immediately after the power is turned off. Be careful that you dont touch the front glass or surrounding area of the lamp or the glass of the lamp compartment.
Attach the new lamp. Replace the new lamp securely in the lamp receptacle and fasten the screws tightly using the hexagon key supplied. Attach the lamp cover. Fasten the screw tightly with an object such as a coin. Attach the front panel. Attach the front panel by pushing left and right side into place. Next, fast again the two screws plaeed on the left and right corner of the rear of the TV.

Technical Specifications

TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL SECAM, NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 Rear Terminals AV1 1/ 1 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. AV2 2/ 2 21-pin Scart connector (CENELEC standard) including audio / video input, RGB input, monitor audio/video output. Power Consumption: 210 W Standby Power Consumption:
Dimensions (w x h x d) : KF-42SX300K: approx. 1200 x 820 x 370 mm. KF-50SX300K: approx. 1376 x 923 x 442 mm. KF-60SX300K: approx. 1618 x 1062 x 542 mm. Weight: KF-42SX300K: approx. 29.5 kg. KF-50SX300K: approx. 37.5 kg. KF-60SX300K: approx. 48.5 kg. Accessories supplied: 1 Remote Control (RM-906) 2 Batteries (IEC designated, AAA size). 1 PC input cable. 1 Hexagon key. 2 Brackets. 2 Screews. 1 Cleaning Cloth. Other features: Digital Comb Filter (High resolution). Teletext, Fastext, TOPtext. NexTView. SmartLink. TV system autodetection. Dolby Virtual. BBE Digital. NICAM. PAP. ACI (Auto Channel Installation). Auto Format.

Wrong characters appear when viewing NexTView. Snowy picture when viewing a TV channel.

Problem

Solution PAP navigation is only possible in TV mode, please check that Media Selector is set to TV. Be sure you are ponting it towards the remote control receiver (see page 8). Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD). If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on page 26. Replace the batteries. Contact your nearest Sony service centre. Turn the TV off. Turn the TV on again, if the lamp indicator is still lit then replace the internal lamp. For details refer to pages 28 and 29.
v, V, B and b buttons do not work in PAP mode.
Remote control does not function.
The standby indicator flashes. The lamp indicator TV set is lit.
on the TV on front of the

Personal Computer

Problem If no picture is displayed and the NO SYNC message appears on the screen. Solution Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets. Check that the 15-Dsub video input connectors pins are not bent or pushed in. Personal Computer output format Check that the output signal format of the Personal computer is set to the corresponding format for the television. In case it is not, adjust the resolution and refresh rate to the corresponding signal (refer to page 31). Problems caused by the connected computer The computer is in power saving mode. Try pressing any key on the computer keyboard. Check that the computers power is "on". Check that the computers keyboard is properly connected. Check that the graphic board is completely seated in the proper bus slot. In case of a notebook PC, check that the monitor signal is set to the external output, and the signal is correctly output to the television. Some picture lines are not correctly displayed. Blurred letters or vertical lines or shade or noise is visible in detailed patterns. The Startup or the Setting screens of the Personal Computer cannot be displayed. Using the menu system, select the "Picture Adjustment" menu and adjust the "Lines Correction" option between -20 and +20 (see page 13). Small letters, check or mesh patterns cannot be accurately displayed. In this case, increase the size of the fonts and/or reduce the mesh pattern brightness. Depending on the PC, the Startup or Setting screens may not be displayed due to the output format of the image. These screens can be displayed on the monitor of the Personal Computer.

If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.

Sony. , .

, : . . 1,2. . , , , , . .

......3 ....4

....6 ...6 ....7 ....8 ....9 .....9

....10

12 " "....13 " ".....14 "".....16 ......16 AV3.....17 .....17 RGB .....17 "".....18......18 ......18 ....18 .....18 .....19 AV .....19 .....20 ().....21
...... 22 NexTView......23
.... 24 , ... 25 DVD... 26 ..... 27

....28

.... 30 .... 31 ..... 32 ....

220-240V. , .

stand by . . , , stand by . .

, . . , . .

. .

, .

, .

. 10. .

, . .

, / /.

, . , , , .

, , a.

, . .

, . . . .

. . , .

, .

, . 10 . , . . . , . , . LCD ( "Liquid Crystal Display" = ). - , (, ). . . , , -: , . , . , , , . , . .

2 ( AAA)

1 (RM-906)

, . , .

wf wd ws wa w; ql qk qj qh qg qf qd q; TV I/
: ( ): , ( ). , . , . 15 , .

2 / DVD: ,

DVD.

3 : ,

. 25.

4 : (w;)

TV, . 2,5.

5 : (w;)

VCR, Sony, 23 -/--, 2 3.

6 ) : qa

(w;) VCR, . ) : 3 , , . ". ". ,. " " (. 11, 5) .

7 : (w;)

TV, , ( , 5 ).

8 :

. , .

9 a) : (w;) TV

MENU , OK, . , v V OK, . ) : (w;) TV MENU (qs) , . 12.

qj NexTView:

NexTView. ,. 23.

qk : ,

. ,. 22.
ql DVD: (w;) (VCR) DVD,
DVD, . 26. w; : , - TV, VCR () DVD. , . . 26.

q; :

, . 16.

qa :

.

wa :

, , . , .

qs : ,

. 12.

qd :

, .

, , .

qf :
, . ,. 13. qg : , . ,. 14.

wd ( ):

, , . 21.

wf : ,

. , .

qh :

. . 22.

, .

( )

.

( ) ( ). ( ) (. 28).

S video

. , ,. 24.
SCART . , , . SCART , . "a e op" . 20. , .

, , , .

1 .

. 10 .

, , .
, , : 1) 2) , , 3) , 4) ( ) 5) , ( ) . -, , ( "").
1 (220240V AC, 50Hz). , . , /, . , Language ().
V, v, B b , , OK, . .
. v V , . OK, . , , , "". , , .
, . OK, . , , " " . 17, , .

5 .

OK, .
. . , . ( ACI). , , , v V OK, . , , . (. 9). OK, .

, , , .

) ,

, 8.

) :
v V, ( ), . b. v V, , ( ). OK.

3 )1 )2,

8 MENU,
LCD ( "Liquid Crystal Display" = )

, . :

: MENU, .
: , v V. , OK b. , OK B. , v/V/B b. , OK.

" "

" " . : MENU OK, . v V, , OK. , .

, . , OK. v V, :

( ). ( , DVD

( ). , OK, .

"", "" "" - . B b, . OK . B b, - -. OK . B b, . OK . B b, . OK . B b, . OK . OK, . "" , . , v V, . . , b. v V, : ( ), ( ), ( ). OK . RGB PC, . , b. v V, -20 +20. OK .
"", "" "" "". "" NTSC (. ). RGB , PC , : "", "" "Lines Correction".
" " . : MENU v, , OK, . v V , , OK. , - .
. OK. v V, : ( ). ( , , "BBE High Definition Sound system"*). ("BBE High Definition Sound system"* - ). Dolby** Virtual (Dolby Virtual, "Dolby Surround Pro Logic").
, OK . B b, . OK . B b, . OK . B b, . OK . OK, , . OK .
- : v V, . OK . : v V, ( , ), A ( 1) B ( 2). OK .
. v V, ( , ,. ) ( ). OK . "Dolby Virtual" " ", ". " , . , , . , OK. v V, : ( ). ( . , ""). ( ).
, OK . " " " ", , 2 +/- . , %, , , , , . ( ) ( . 21). , OK. v V, : B b, . - : v V, . : v V, ( , ), A ( 1) B ( 2). , ( ) (. 21), , , , .
* "BBE High Definition Sound system" Sony Corporation BBE Sound, Inc. 258 866. "BBE" BBE BBE Sound, Inc. ** , , Dolby Surround. ( . 25). ** Dolby Laboratories. "Dolby" " D" Dolby Laboratories.

Hi-Fi

, . . , .
/ SCART G. RGB SCART G. RGB. / SCART F. RGB SCART F. RGB. / SCART E. S Video SCART E. S Video. B C. S Video S Video A C. S Video. RGB PC H I.

, .

L/G/S/I 4 S 4 , -. ,. " " "-" "A" (. 14).

DVD

, Sony, DVD Sony Sony. DVD ( Sony), . 3 : , 3- DVD -. , , . , . 1 .
, (VCR ( ) DVD) (. 1). , 6 , (VCR DVD) (. 2). VCR DVD , DVD (. -), (. 3). , . , -. 2
DVD . , . .
, , , : VCR ( ), TV DVD.
SONY (VHS) 301, 302, 303, 308, 309,362 SONY (BETA) 303, 307, 310 SONY (DV) 304, 305, 306 AIWA 325, 331, 351 AKAI 326, 329, 330 DAEWOO 342, 343 GRUNDIG 358, 355, 360, 361, 320, 351, 366 HITACHI 327, 333, 334 JVC 314, 315, 322, 344, 352, 353, 354, 348, 349 LG 332, 338 LOEWE 358, 355, 360, 361, 320, 351 MATSUI 356, 357 ORION 328 PANASONIC 321, 323 PHILIPS 311, 312, 313, 316, 317, 318, 358, 359, 363, 364 SAMSUNG 339, 340, 341, 345 SANYO 335, 336 SHARP 324 THOMSON 319, 350, 365 TOSHIBA 337
001, 029, 030, 036, 037, 038, 039, 040, 041, 042, 043, 044, 053, 054, 055 AIWA 021 AKAI 032 DENON 018, 027, 020, 002 GRUNDIG 009, 028, 023, 024, 016, 003 HITACHI 025, 026, 015, 004, 035 JVC 006, 017 KENWOOD 008 LG 015, 014, 034 LOEWE 009, 028, 023, 024, 016, 003 MATSUI 013, 016 ONKYO 022, 033 PANASONIC 018, 027, 020, 002, 045, 046, 047 PHILIPS 009, 028, 023, 024, 016, 003, 031 PIONEER 004, 050, 051, 052 SAMSUNG 011, 014 SANYO 007 SHARP 019, 027 THOMSON 012 TOSHIBA 003, 048, 049 YAMAHA 018, 027, 020, 002

- , -.

KF - 4 KF-5 2SX300K KF-6 0SX300K : 1,8 0SX3 : 00K: 1,8 2,2
KF-4 KF-5 2SX300K KF-6 0SX300K : 1,8 0SX3 : 00K: 1,8 2,2

, .

XL-2100E. , . , . . . 100C (212F), 30. . . . , . , , . . , . . , . . , . , . . , - Sony. , , .
, , . , . 30 , . .

, , .

. .

, , .

. .

. , .

, .

, . , .

: : B/G/H, D/K, L, I : PAL SECAM, NTSC 3.58, 4.43 ( ) : VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 : LCD ( ) . : KF-42SX300K: 42 (. 107 ). KF-50SX300K: 50 (. 127 ). KF-60SX300K: 60 (. 153 ). AV1 1/ 1 21- SCART (CENELEC ) / , RGB , TV /. AV2 2/ 2 21- SCART (CENELEC ) / , RGB , /. AV3 3/ S 3 21- SCART (CENELEC ) / , S video , / SmartLink. (/) - PC - . PC PC. : 210 W : 1W ( x x ): KF-42SX300K:. 1200 x 820 x 370 KF-50SX300K:. 1376 x 923 x 442 KF-60SX300K:. 1618 x 1062 x 542 : KF-42SX300K:. 29,5 KF-50SX300K:. 37,5 KF-60SX300K:. 48,5 : 1 (RM-906) 2 ( IEC , AAA ) 1 2 2 1 : ( ) , ,. NexTView SmartLink. . Dolby Virtual BBE Digital NICAM ( , PAP = Picture And Picture) ACI ( "Auto Channel Installation" = ). .

, Scart- 3/ S 3 , Scart- , , Scart- 1/ 1, 2/ 2 S 4. SmartLink, . : "", , OK. v V , : TV AV1 AV2 AV4 AUTO , . , 1/ 1. , 2/ 2. , 4 S 4 , .
"AUTO", , . Scart- 3/ S 3 , Scart-, " AV3" "TV" .
, , . , . : 1 "" , OK. v V , : SAT (),. (), DVD, ( ), VIDEO ( = ) DVD rec. ( DVD). b ( , B). , v V, "" OK.

2 , Scart-

. , .
3 B b, "OK"
OK . , , , B b "" OK. , .
, RGB. , RGB-. : "" , RGB "RGB " OK. v V, 5 +5. OK .
"" . : MENU v , , OK . v V OK. , .
Language Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset

Set Up

, . : , OK 2 " " . 10.
, . : , OK 3 " " . 10.
. : , OK " " . 10.
, ( ) . : , OK 7 " " . 11.

, ( ). :

"", , OK, v V , , , . OK. OK v, V, B b, , OK. , v, V, B b, "," OK . - "%", OK. " " OK.

a) , .

"" , , OK, v V, , : AV1, AV2 AV3 Scart- , AV4 AV5 . , OK. :

a) , v V

OK. : VIDEO, DVD, CABLE (), , CAM (, SAT () PC ( AV5).
b) , . OK. , , v, V, B b , OK. , v, V, B b, ""
OK . - "%", OK. " " OK. b) . : "" , , OK, v V, , : AV1, AV2 AV3 Scart- , AV4 AV5 . b, . OK v V, -9 +9.
: a) . : 1 "" , . 18 ". ", OK. , OK. v V, , ( "0"). B.
, "". , OK. v V (B/G , D/K , L I ). B.
, OK. v V ("C" "S" ). . , b v V . , OK . .
b) , . : "" , . 18 ". ", OK. , PROG +/-, , , . , OK. , , v V, B b, , OK. , v, V, B b, OK . - "%", , OK. , " " OK. c) . ( ) , , . : (), , "" , .18 , ". ", OK. A b. v V, -15 +15. OK . d) , PROG +/-. : "" , . 18 ". ", OK. , PROG +/-, , . , , , b. v V, . OK . , , "." "." e) (, -) 3/ S 3 . , Scart- , "" : "" , . 18 ". ", OK. b. v V, . OK . , , "." "."

L/G/S/I 4 S 4 . , " " , " " " " "" (. 14).

DVD

Sony, DVD Sony Sony. DVD ( Sony) . 3 : 3- , DVD . , , . . , (VCR ( ) DVD) (. 1).
, , 6 , (VCR DVD) (. 2.). , VCR DVD, , DVD (. ) (. 3). , . . 2

DVD .

, , . .
, , , , : VCR ( ), TV DVD.
SONY (VHS) 301, 302, 303, 308, 309,362 SONY (BETA) 303, 307, 310 SONY (DV) 304, 305, 306 AIWA 325, 331, 351 AKAI 326, 329, 330 DAEWOO 342, 343 GRUNDIG 358, 355, 360, 361, 320, 351, 366 HITACHI 327, 333, 334 JVC 314, 315, 322, 344, 352, 353, 354, 348, 349 LG 332, 338 LOEWE 358, 355, 360, 361, 320, 351 MATSUI 356, 357 ORION 328 PANASONIC 321, 323 PHILIPS 311, 312, 313, 316, 317, 318, 358, 359, 363, 364 SAMSUNG 339, 340, 341, 345 SANYO 335, 336 SHARP 324 THOMSON 319, 350, 365 TOSHIBA 337
SONY 001, 029, 030, 036, 037, 038, 039, 040, 041, 042, 043, 044, 053, 054, 055 AIWA 021 AKAI 032 DENON 018, 027, 020, 002 GRUNDIG 009, 028, 023, 024, 016, 003 HITACHI 025, 026, 015, 004, 035 JVC 006, 017 KENWOOD 008 LG 015, 014, 034 LOEWE 009, 028, 023, 024, 016, 003 MATSUI 013, 016 ONKYO 022, 033 PANASONIC 018, 027, 020, 002, 045, 046, 047 PHILIPS 009, 028, 023, 024, 016, 003, 031 PIONEER 004, 050, 051, 052 SAMSUNG 011, 014 SANYO 007 SHARP 019, 027 THOMSON 012 TOSHIBA 003, 048, 049 YAMAHA 018, 027, 020, 002

, , , .

KF-4 2S KF-5 X300K: 1. 0S KF-6 X300K: 8 1.8 0SX3 00K: 2.2
KF - 4 2S KF-5 X300K: 1.8 0SXKF - 6 0SX3 0K: 1.8 00K: 2.2
, , , . XL-2100E. . . , . , . 100 C (212 F) 30 . , . -. , . ,. . . . , . . . . . . . Sony. , .
. , , . . 30 , . . , .

. , .

. , .

. - , .

. , . . . . , . , .
: : B/G/H, D/K, L, I : PAL SECAM, NTSC 3.58, 4.43 ( ) : VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 : LCD (). : KF-42SX300K: 42 ( 107 ). KF-50SX300K: 50 ( 127 ). KF-60SX300K: 60 ( 153 ). AV1 1/ 1 21- scart- ( CENELEC ) / , RGB, / . AV2 2/ 2 21- Scart- ( CENELEC) / , RGB, / . AV3 3/ S 3 21- Scart- ( CENELEC) / , S video, / SmartLink. (/ ) - "" - minijack. PC. : 210 , : 1 ( x x ): KF-42SX300K: 1200 x 820 x 370 KF-50SX300K: 1376 x 923 x 442 KF-60SX300K: 1618 x 1062 x 542 : KF-42SX300K: 29.5 KF-50SX300K: 37.5 KF-60SX300K: 48.5 , : 1 (RM-906) 2 ( IEC, AAA) 1 . 1 . 2. 2. 1 . : ( ). Teletext, Fastext, TOPtext. NexTView. SmartLink. . Dolby Virtual. BBE Digital. NICAM. PAP ( "Picture And Picture = ). ACI ( "Auto Channel Installation" = ). .