Do not block or cover this ventilation opening. For ventilation, leave a space of at least 10 cm from the wall.
Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) Choose the country in which you are going to operate the TV, 3) check how to connect optional equipment to your TV, 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu).

Language

Select language
Connect the TV plug to the mains socket (220-240V AC, 50Hz) The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.
English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski

Language Select language

English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski English Nederlands Franais Italiano Deutsch Trke Espaol Portugus Polski
Press the V, v, B or b buttons on the remote control to select your language, then press the OK button to confirm your selection. From now on all the menus will appear in your chosen language.
The Country menu appears automatically. Press the v or V button to select the country in which you are using the TV. Press the OK button to confirm your selection. If the country in which you want to use the TV set does not appear in the list, select off instead of a country. To avoid wrong teletext characters for cyrillic languages we recommend selecting Russia country if your own country does not appear in the list.
Country Select country Off Ireland Nederland Belgi/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera

continued.

A diagram will appear showing you how to connect a wide range of equipment to your TV set. Follow the instructions and finally press the OK button to remove the picture and continue the automatic process. After the automatic tuning process has finished and the optional equipment has been connected at this stage, we recommend you follow the instructions explained on the section "Connection Guide" on page 17 to get the optimum settings related with the optional equipment.

Please connect your equipment according to this chart
5 The Auto Tuning menu appears on the screen. Press the OK

button to select Yes.

Do you want to start automatic tuning? Yes No
6 The TV starts to automatically search and store all
available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the v or V button and OK to store the channels. If no channels were found during the auto tune process, a message appears automatically on the screen asking you to connect the aerial. Check the aerial connection (refer to page 9). Press the OK button to restart the auto tuning process.
Auto Tuning Programmes found: 4
No channel found. Please connect aerial Confirm
After all available channels are captured and stored, the Programme Sorting menu automatically appears on the screen enabling you to change the order in which the channels are stored.

Programme Sorting

a) If you wish to keep the broadcast channels in the tuned order,

go to step 8.

TVE TVE2 TV3 C33 C27 C58 S02 S06
b) If you wish to store the channels in a different order:

1 Press the

v or V button to select the programme number with the channel (TV Broadcast) you wish to move. Press the b button. v or V button to select the new programme number position for your selected channel (TV Broadcast). Press the OK button to store.
the order of the other channels.
Programme Sorting TVE TVE2 TV3 C33 C27 C58 S02 S06

2 Press the

3 Repeat steps b)1 and b)2 if you wish to change
8 Press the MENU button to remove the menu from the screen
Your LCD TV is now ready for use
Introducing and Using the Menu System
Your LCD TV uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
To switch on the menu screens: Press the MENU button to switch the first level menu on.

Conventional 4:3 picture size, full picture information.
Compromise between 4:3 and 16:9 picture size.
ZOOM: Widescreen format for letterbox movies.
For 16:9 broadcast. Full picture information.
In SMART, ZOOM and 14/9 modes, parts of the top and bottom of the screen are cut off. Press v or V to adjust the position of the image on the screen (e.g. to read subtitles). Only "WIDE" and "4/3" modes can be selected for an RGB signal connected to the PC connector. According to the format of diffussion, black bands can always appear whatever the selected mode.
AV3 OUTPUT This option allows you to select the source to be output from the Scart connector 3/ S 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connector 1/ 1, 2/ 2 or front connectors S 4 or 4 and 4. If your VCR supports SmartLink, this procedure is not necessary. To do this: Once you have entered into the "Features" menu as it is explained in the previous page and after selecting the option, press OK. Then press v or V to select the desired output signal: TV AV1 AV2 AV4 AUTO to output the aerial source. to output sources connected to 1/ 1. to output sources connected to 2/ 2. to output sources connected to 4 or S 4 and 4. to output the signal that is being viewed on the TV.
If you select AUTO, the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the AV3 Output to TV for correct unscrambling. CONNECTION GUIDE Even you have already connected the external equipment to the TV set, it is important for you to follow the instructions of this menu. If you proceed in this way, you will get the optimum picture settings related with the optional equipment. To do this:
1 Once you have entered the "Features" menu as it is explained in the previous page and after selecting the option, press OK. Next press v or V to chose the equipment you want to connect
among the available: SAT (satellit), Decoder, DVD, GAME, VIDEO or DVD rec. (DVD recorder). Next press b to select the equipment chosen (equipment selected also can be deleted by pressing B). Once you have selected all the equipment to be connected, press v or V to select "Confirm" and press OK.
2 A new menu will appear showing you on which Scart connector of the rear of the TV should be
connected each equipment. Please connect each equipment according to this information to get the optimum picture setting of the optional equipment.

3 Once you have connected the optional equipment, press B or b to select "OK" and finally press
the OK button of the remote control.
We strongly recommend you to follow our connection proposals, but in case you do not agree press B or b to select No and next press the OK button. A new menu appears on the screen in which you can assign the connections according to your preferences.
RGB CENTRING This option is only available if an RGB source has been connected to the TV. This option allows you to readjust the horizontal position of the picture in case you need to do it when connecting an RGB source. To do this: Once you have entered the "Features" menu as it is explained in the previous page and while watching an RGB source select the RGB Centring option and press OK. Then press v or V to adjust the centre of the picture between 5 and +5. Finally press OK to confirm and store.

The Set Up Menu

The Set Up menu allows you to alter various options on this TV. To do this: Press the MENU button and press v three times to select , then press OK to enter this menu. Next press v or V to select the desired option and press OK. Finally read below how to operate into each option.
Set Up Language Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset
LANGUAGE This option allows you to select the language that menus are displayed in. To do this: After selecting the option, press OK and then proceed in the same way as in step 2 of the section "Switching On the TV and Automatically Tuning" on page 10.
COUNTRY This option allows you to select the country in which you wish to operate the TV set. To do this: After selecting the option, press OK and then proceed in the same way as in step 3 of the section "Switching On the TV and Automatically Tuning" on page 10.
AUTO TUNING This option allows you to automatically search for and store all available TV channels. To do this: After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of the section Switching On the TV and Automatically Tuning on page 11.
PROGRAMME SORTING This option allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press OK and then proceed in the same way as in the step 7 of the section Switching On the TV and Automatically Tuning on page 11.
PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: 1 Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press v or V to select the programme number with the channel you wish to name. Next press OK.

With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word End on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. For a blank, select " " on the screen and press OK.
AV PRESET This option allows you to: a) Designate a name to the external equipment you have connected to the input sockets of the TV set.
To do this: Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press v or V to select the input source you wish to name: AV1, AV2 or AV3 for the rear Scarts, AV4 for front connectors and AV5 for the PC input connector. Next press OK twice. A label automatically appears in the label column: a) If you want to use one of the predefined labels, press v or V to select the desired label and finally press OK. The total predefined labels are: VIDEO, DVD, CABLE, GAME, CAM (camcorder), SAT (satellite) or PC (only for the AV5). b) If you want to set a different label, select Edit and press OK. Then, with the first element highlighted, press v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word End on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. For a blank, select " " on the screen and press OK.
b) Change the input sound level of the optional equipment connected.
To do this: Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option press OK, then press v or V to select the input source you want to alter the input sound level: AV1, AV2 or AV3 for the rear Scarts, AV4 for front connectors and AV5 for the PC input connector. Next press twice b to highlight the Sound Offset column. Finally press OK and v or V to alter the input sound level between -9 and +9.

MANUAL PROGRAMME PRESET This option allows you to:
a) Preset channels or the VCR channel one by one to the programme order of your choice.

To do this:

1 Once you have entered the Set Upmenu as it is explained on page 18 and after selecting the "Manual
Programme Preset" option, press OK. Next with Programme option highlighted press OK. Press v or V to select which programme number you want to preset the channel on (for VCR, select programme number 0). Then press B.
The following option is only available depending on the country you have selected in the Country menu. After selecting the System option, press OK. Then press v or V to select the TV Broadcast system (B/G for western European countries, D/K for eastern European countries, L for France or I for United Kingdom). Then press B.
After selecting the Channel Number option, press OK. Next press v or V to select the channel tuning ("C" for terrestrial channels or "S" for cable channels). Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press b and v or V to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: Once you have entered the Set Upmenu as it is explained on page 18 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press OK. Then, with the first element highlighted, press v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word End on the screen and finally press OK to turn off the menu from the screen. To correct the letter, select "%" on the screen to go back and press OK. For a blank, select " " on the screen and press OK.

NexTView*

*(depending on availability of service). NexTView is an on-screen electronic programme guide, providing you with programme information for different broadcasters. When looking for information you can search by theme (sports, art, etc.) or date. If wrong characters appear when viewing NexTView, use the menu system to enter the Language menu (see page 18) and select the same language as the NexTView is broadcasted.

Displaying NexTView

Select a broadcast channel providing a NexTView service. In this case the indication NexTView is displayed as soon as data is available. To see NexTView service you have two different types of NexTView interface. These depend on the % of available data: a) Programme List interface: Whilst you are watching TV, and after the indication NexTView (coloured white) is displayed on the screen, press the button on the remote control to watch the Programme List interface (see fig. 1). b) Overview interface: Whilst you are watching TV, and after more than 50% of NexTView data is available (100% data may not be available depending on the area) the indication NexTView (coloured black) is displayed on the screen. Press the button on the remote control to watch the Overview interface (see fig. 2).
To navigate through NexTView: Press B or b to move left or right. Press v or V to move downwards or upwards. Press OK to confirm a selection. If you have selected a programme, press OK to get more information on the selected programme. To switch NexTView off, press the

www.tvmovie.de

15:30 AttrText16 AttrText16 AttrText16 AttrText16 AttrText16 AttrText16 14:55 Thu 12 Jun 14:36 16:00
button on the remote control. Overview interface (fig. 2):
Praesentiert von Ihrer Programmzeitschr 15:00 Thu 12 14:30 Auf schlimmer undewig AttrText Baywatch AttrText Benny Hill AttrText Perry Mason The Osbournes AttrText Segeln: Louis Vuitton Cup AttrText Twilight Zone AttrText Perry Mason Tue 17 Jun RTL2
Programme List interface (fig. 1):
Praesentiert von Ihrer Programmzeitschr Thu 12 15:00 14:30 AttrText AttrText AttrText AttrText AttrText AttrText Perry Mason Tue 17 Jun RTL2

Thu 12 Jun 14:36 16:00

14:55 - 16:30
Krimiserie - Der Fall mit dem mittelmass

General Categories

General categories

Programmme list 2 Date:

Press the red button of the remote control to display the date screen, you can select the desired date by pressing

Categories:

v or V. Next press OK to confirm.
Press the blue button of the remote to display the icons (see below the Icons key) for different themes. Next press v or V to select the desired icon and finally press the OK button to confirm.

Hi-Fi speakers

To enjoy Dolby Virtual sound effect through your audio equipment
Place the speakers of your equipment in front of your listening position and beside the TV set, keeping a distance of 50 cm between each speaker and the TV set. Then by using the menu system, select the menu Sound Adjustment. Next select Dolby Virtual on the Sound Effect option (see page 14).

Your sitting position

Viewing pictures from equipment connected to the TV
Connect your equipment to the designated TV socket, as indicated in the previous page. Switch on the connected equipment. To watch the picture of the connected equipment, press the input symbol appears on the screen.

Symbol Input Signals

button repeatedly until the correct
Audio / video input signal through the Scart connector G RGB input signal through the Scart connector G. This symbol appears only if an RGB source has been connected. Audio / video input signal through the Scart connector F. RGB input signal through the Scart connector F. This symbol appears only if an RGB source has been connected. Audio/video input signal through the Scart connector E. S Video Input signal through the Scart connector E. This symbol appears only if an S Video source has been connected. Video input signal through the phono socket B and Audio input signal through C. S Video Input signal through the front S Video input jack A and Audio signal through C. This symbol appears only if an S Video source has been connected. RGB input signal through the PC connector H and I. button on the remote control to return to the normal TV picture.

Press the

For Mono Equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or S 4 input signal using the instructions above. Next, refer to the Sound Adjustment section of this manual and set Dual Sound option to A on the sound menu screen (see page 14).
Remote Control Configuration for VCR or DVD
In its default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the remote control needs to be configured. fig. 3 To do this: Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have more than one code, enter the first code number. A small label is added inside the battery door to allow you to record your brand codes.

For the best picture quality, try to position the TV set so that you can view the screen from within the areas shown below.

Horizontal viewing area

KF-42 S KF-50 X300K: 1.8 SX30 m and 0K KF-60 SX30 : 1.8 m a more n 0K: 2.2 m d more and m ore
(Optimum viewing position)

Vertical viewing area

KF-42 S KF-50 X300K: 1. 8 ma SX30 nd 0K KF-60 SX30 : 1.8 m a more nd mo 0K: 2.2 m and m re ore

Replacing the lamp

When the lamp becomes dark or the picture colour is not normal or the lamp indicator replace with a new lamp. on the TV set flashes, Only use the lamp XL-2100E for replacement. If you use another lamp, it may cause damage to the TV set. Do not remove the lamp except when replacing it. Before replacing the lamp, turn off the power and disconnect the power cord. Replace the lamp only after it becomes cool. The front glass of the lamp remains at least 100 C (212 F) even after the power has been turned off for 30 minutes. Do not place the old lamp in proximity to children or flammable material. Do not get the old lamp wet, or insert objects inside the lamp. It may cause the lamp to explode. Do not place the old lamp near easily flammable objects, as this may cause fire. Also, do not put your hand inside the lamp compartment, as you may be burned. Attach the new lamp securely. If it is not securely attached, the picture may become dark. Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass become dirty, the picture quality may deteriorate or the lamp life may shorten. Attach the lamp cover firmly. If it is not firmly attached, the power will not turn on. When the lamp burns out, a noise is audible. This does not indicate damage to the TV set. Consult your nearest Sony service center to obtain a new lamp. Always remember to dispose of used lamps in an evironmentally friendly way.
Turn off the power and disconnect the power cord. If you start changing the lamp without disconnecting the power cord, the standby indicator Disconnect the power cord to continue changing the lamp. Replace the lamp 30 minutes or more after the power is turned off to allow it to cool. Prepare the new lamp.

on the TV set flashes.

Loosen the two screws placed on the left and right corner of the rear of the TV with an object such as a coin.
Remove the front panel. Remove the front panel without moving the TV set
Grasp the left and right side of the front panel with your fingers and pull it forward. Be careful not to catch your fingernails.
Loosen the screw with an object such as a coin and remove the lamp cover.
Loosen the two screws and pull out the lamp.
Loosen two screws with the hexagon key supplied.
Pull out the lamp by the handle.
The lamp is still extremely hot immediately after the power is turned off. Be careful that you dont touch the front glass or surrounding area of the lamp or the glass of the lamp compartment.

Attach the new lamp. Replace the new lamp securely in the lamp receptacle and fasten the screws tightly using the hexagon key supplied. Attach the lamp cover. Fasten the screw tightly with an object such as a coin. Attach the front panel. Attach the front panel by pushing left and right side into place. Next, fast again the two screws plaeed on the left and right corner of the rear of the TV.

Technical Specifications

TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL SECAM, NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 Rear Terminals AV1 1/ 1 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. AV2 2/ 2 21-pin Scart connector (CENELEC standard) including audio / video input, RGB input, monitor audio/video output. Power Consumption: 210 W Standby Power Consumption:
Dimensions (w x h x d) : KF-42SX300K: approx. 1200 x 820 x 370 mm. KF-50SX300K: approx. 1376 x 923 x 442 mm. KF-60SX300K: approx. 1618 x 1062 x 542 mm. Weight: KF-42SX300K: approx. 29.5 kg. KF-50SX300K: approx. 37.5 kg. KF-60SX300K: approx. 48.5 kg. Accessories supplied: 1 Remote Control (RM-906) 2 Batteries (IEC designated, AAA size). 1 PC input cable. 1 Hexagon key. 2 Brackets. 2 Screews. 1 Cleaning Cloth. Other features: Digital Comb Filter (High resolution). Teletext, Fastext, TOPtext. NexTView. SmartLink. TV system autodetection. Dolby Virtual. BBE Digital. NICAM. PAP. ACI (Auto Channel Installation). Auto Format.
AV3 3/ S 3 Panel System: 21-pin Scart connector LCD (Liquid Crystal Display) (CENELEC standard) panel. including audio / video input, S video input, selectable audio / Projected picture size: video output and SmartLink KF-42SX300K: 42 inches (approx. interface. 107 cm measured diagonally). KF-50SX300K: 50 inches (approx. audio outputs (Left/Right) 127 cm measured diagonally). - phono jacks KF-60SX300K: 60 inches (approx. 153 cm measured diagonally). PC audio input - minijack. PC PC input.
Front Terminals S 4 S Video input 4 pin DIN 4 video input phono jack 4 audio input phono jacks headphones jack Sound Output: 2 x 20 W (music power) 2 x 10 W (RMS) Woofer: 30 W (music power) 15 W (RMS)
Design and specifications are subject to change without notice. This instruction manual has been printed on: Ecological Paper - Totally Chlorine Free

Wrong characters appear when viewing NexTView. Snowy picture when viewing a TV channel.

Problem

Solution PAP navigation is only possible in TV mode, please check that Media Selector is set to TV. Be sure you are ponting it towards the remote control receiver (see page 8). Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD). If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on page 26. Replace the batteries. Contact your nearest Sony service centre. Turn the TV off. Turn the TV on again, if the lamp indicator is still lit then replace the internal lamp. For details refer to pages 28 and 29.
v, V, B and b buttons do not work in PAP mode.
Remote control does not function.
The standby indicator flashes. The lamp indicator TV set is lit.
on the TV on front of the

Personal Computer

Problem If no picture is displayed and the NO SYNC message appears on the screen. Solution Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets. Check that the 15-Dsub video input connectors pins are not bent or pushed in. Personal Computer output format Check that the output signal format of the Personal computer is set to the corresponding format for the television. In case it is not, adjust the resolution and refresh rate to the corresponding signal (refer to page 31). Problems caused by the connected computer The computer is in power saving mode. Try pressing any key on the computer keyboard. Check that the computers power is "on". Check that the computers keyboard is properly connected. Check that the graphic board is completely seated in the proper bus slot. In case of a notebook PC, check that the monitor signal is set to the external output, and the signal is correctly output to the television. Some picture lines are not correctly displayed. Blurred letters or vertical lines or shade or noise is visible in detailed patterns. The Startup or the Setting screens of the Personal Computer cannot be displayed. Using the menu system, select the "Picture Adjustment" menu and adjust the "Lines Correction" option between -20 and +20 (see page 13). Small letters, check or mesh patterns cannot be accurately displayed. In this case, increase the size of the fonts and/or reduce the mesh pattern brightness. Depending on the PC, the Startup or Setting screens may not be displayed due to the output format of the image. These screens can be displayed on the monitor of the Personal Computer.
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.

Sony. , .

, : . . 1,2. . , , , , . .

......3 ....4

SONY 001, 029, 030, 036, 037, 038, 039, 040, 041, 042, 043, 044, 053, 054, 055 AIWA 021 AKAI 032 DENON 018, 027, 020, 002 GRUNDIG 009, 028, 023, 024, 016, 003 HITACHI 025, 026, 015, 004, 035 JVC 006, 017 KENWOOD 008 LG 015, 014, 034 LOEWE 009, 028, 023, 024, 016, 003 MATSUI 013, 016 ONKYO 022, 033 PANASONIC 018, 027, 020, 002, 045, 046, 047 PHILIPS 009, 028, 023, 024, 016, 003, 031 PIONEER 004, 050, 051, 052 SAMSUNG 011, 014 SANYO 007 SHARP 019, 027 THOMSON 012 TOSHIBA 003, 048, 049 YAMAHA 018, 027, 020, 002

, , , .

KF-4 2S KF-5 X300K: 1. 0S KF-6 X300K: 8 1.8 0SX3 00K: 2.2
KF - 4 2S KF-5 X300K: 1.8 0SXKF - 6 0SX3 0K: 1.8 00K: 2.2
, , , . XL-2100E. . . , . , . 100 C (212 F) 30 . , . -. , . ,. . . . , . . . . . . . Sony. , .
. , , . . 30 , . . , .

. , .

. , .

. - , .

. , . . . . , . , .
: : B/G/H, D/K, L, I : PAL SECAM, NTSC 3.58, 4.43 ( ) : VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 : LCD (). : KF-42SX300K: 42 ( 107 ). KF-50SX300K: 50 ( 127 ). KF-60SX300K: 60 ( 153 ). AV1 1/ 1 21- scart- ( CENELEC ) / , RGB, / . AV2 2/ 2 21- Scart- ( CENELEC) / , RGB, / . AV3 3/ S 3 21- Scart- ( CENELEC) / , S video, / SmartLink. (/ ) - "" - minijack. PC. : 210 , : 1 ( x x ): KF-42SX300K: 1200 x 820 x 370 KF-50SX300K: 1376 x 923 x 442 KF-60SX300K: 1618 x 1062 x 542 : KF-42SX300K: 29.5 KF-50SX300K: 37.5 KF-60SX300K: 48.5 , : 1 (RM-906) 2 ( IEC, AAA) 1 . 1 . 2. 2. 1 . : ( ). Teletext, Fastext, TOPtext. NexTView. SmartLink. . Dolby Virtual. BBE Digital. NICAM. PAP ( "Picture And Picture = ). ACI ( "Auto Channel Installation" = ). .
Made in Spain Printed in Spain Sony Spain S. A. Pol. Ind. Can Mitjans s/n 08232 Vildecavalls (Barcelona) Spain . . / 08232 , ,
S 4 S Video 4 DIN 4 "" 4 "" : 2 x 20 ( ) 2 x 10 (RMS) : 30 ( ) 15 (RMS)

. : -

: : 31,4 - 48,4. : 59 - 61. : 1024 x -768.

( x ) () ()

( ), . . . , TV .

, ( ), . , Scart-.

" " "" (. 13). , , (. 25).
+ . , " " " " "." (. 14). , . " " "" (. 13).

, , , . . .

. .

, Scart- .

"" (.18) , . , , , , . "" (.18) , NexTView. " " () (. 20). " "" "B." (. 13). , "" " AV3" "TV" (. 17). , scart- 2/ 2.