Reviews & Opinions
Independent and trusted. Read before buy Sony KLV-S26a10E!

Sony KLV-S26a10E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony KLV-S26a10e Monitor, size: 4.4 MB
Related manuals
Sony KLV-S26a10e Installation Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony KLV-S26a10EAbout Sony KLV-S26a10E
Here you can find all about Sony KLV-S26a10E like manual and other informations. For example: review.

Sony KLV-S26a10E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony KLV-S26a10E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony KLV-S26a10E photo ]

Video review

Sony Bravia KLV S26A10 fail D:

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
9400Nørresundby 1:26am on Thursday, October 21st, 2010 
I am incredibly happy with my sony bravia that I purchased last Christmas. I think that the display is incredible and has really vivid colours. I purchased my Sony Bravia about 6 months ago after my Samsung TV went ka-put. The first thing about it is how light it is, because it is so slim.
Thaidog 8:18am on Thursday, August 26th, 2010 
Terrible shelf life. Worse customer support. I had never purchased such an expensive TV as the KLVS26A10 in my life. High Quality, High Price I have owned the 26" Bravia for about a year and the only con is the price. I paid $1000 for it.
Niko 1:47am on Saturday, August 21st, 2010 
After months of searching for a 26 inch LCD TV, I finally decided on the Sony KLV26A10. Beautiful design, nice size for small apartment. I agree with what the other reviewers have written. I really like the quality of this set - very heavy for an LCD. Extremely good picture in Hi-Def even though displayed in native 1366 x 768.
Tolmandary 10:17pm on Saturday, July 17th, 2010 
Quality, value, clarity of picture - absolutely incredible! None Video Humming sounds Great picture quality, fantastic viewing angle. Constant humming noise during operation. Poor warranty policy and terrible customer service.
MgFrobozz 9:40am on Friday, May 14th, 2010 
Good picture quaility and good price point No PIP and design a bit dated Maybe because I was comparing the picture against a plasma television.
ahoeppner 9:43pm on Wednesday, April 28th, 2010 
Beware! I would be very wary about purchasing this TV! I did not buy mine from Amazon, but I did buy this model 2 years ago. It was an investment.
marcanth 3:30am on Tuesday, April 6th, 2010 
Just settle down and enjoy This is an awesome TV with an unbelievably good picture. Just settle down and enjoy This is an awesome TV with an unbelievably good picture. SONY TV Another fine example of Sony technology,excellent picture and sound.
ciaran_mcgloin 8:11pm on Wednesday, March 17th, 2010 
Good screen, does the job perfectly I brought it so I could use one screen for my PC, to watch tv on & most importantly to plug my Playstation2 into.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\00USCOVER.fm 01US02WAR-UC.book Page 1 Wednesday, June 1, 2005 4:07 PM

masterpage:Right

2-589-826-13(1)

LCD Color TV

Operating Instructions

KLV-S19A10 KLV-S23A10

2005 Sony Corporation

KLV-S26A10 KLV-S32A10

KLV-S19A10/KLV-S23A10/KLV-S26A10/KLV-S32A10 2-589-826-13(1)
G:\SONY\03 TV\834494S KLV-S19-32A10_EN\0601_EN\2589826131\2589826131 KLVS19-32A10_US\01US02Cov2.fm 01US02WAR-UC.book Page 2 Wednesday, June 1, 2005 4:07 PM
masterpage:3 columns Right

Owners Record

The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. Serial No.

Contacting Sony
If, after reading these operating instructions, you have additional questions related to the use of your Sony TV, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or 1-877-899-SONY (7669) (Canadian residents only).
G:\SONY\03 TV\834494S KLV-S19-32A10_EN\0601_EN\2589826131\2589826131 KLVS19-32A10_US\01US02WAR.fm 01US02WAR-UC.book Page 3 Wednesday, June 1, 2005 4:07 PM

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Declaration of Conformity
Trade Name: SONY Model: KLV-S19A10/KLV-S23A10/ KLV-S26A10/KLV-S32A10 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR

PRECAUCION

RIESGO DE CHOQUE ELECTRICO NO ABRIR
If any liquid or solid object should fall inside the cabinet, unplug the TV immediately and have it checked by qualified service personnel before operating it further. If you will not be using the TV for several days, disconnect the power by pulling the plug itself. Never pull on the cord. For details concerning safety precautions, see Important Safety Instructions on page 4 and Important Safeguards on page 5. The TV should be installed near an easily accessible power outlet. To prevent internal heat buildup, do not block the ventilation openings. Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. Avoid operating the TV at temperatures below 5C (41F). If the TV is transported directly from a cold to a warm location, or if the room temperature changes suddenly, the picture may be blurred or show poor color due to moisture condensation. In this case, please wait a few hours to let the moisture evaporate before turning on the TV. To obtain the best picture, do not expose the screen to direct illumination or direct sunlight. It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the TV in a room where the floor and walls are not of a reflective material.

Installing

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

NOTIFICATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s s s Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

To prevent electric shock, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Use the following Sony appliance(s) only with the following WALL-MOUNT BRACKET. Use with other WALL-MOUNT BRACKET may cause instability and possibly result in injury. SONY APPLIANCE MODEL NO. KLV-S19A10 KLV-S23A10 KLV-S26A10 KLV-S32A10 SONY WALL-MOUNT BRACKET MODEL NO. SU-WL11 (KLV-S19A10) SU-WL31 (KLV-S23A10/KLV-S26A10/ KLV-S32A10)

Note on Caption Vision

This TV provides display of TV closed captioning in accordance with 15.119 of the FCC rules.
For Customers in the United States
If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

For Customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Safety

s s Operate the TV only on 120 V-240 V AC. Use the AC power cord specified by Sony and suitable for the voltage where you use it. The plug is designed, for safety purposes, to fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.

To Customers

Sufficient expertise is required for installing the specified product. Be sure to subcontract the installation to Sony dealers or licensed contractors and pay adequate attention to safety during the installation.

(Continued)

G:\SONY\03 TV\834494S KLV-S19-32A10_EN\0601_EN\2589826131\2589826131 KLVS19-32A10_US\01US02WAR.fm 01US02WAR-UC.book Page 4 Wednesday, June 1, 2005 4:07 PM
This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance (http://www.eiae.org).
Important Safety Instructions
1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Do not hang anything on the unit. The unit may fall from the stand or wall-mount bracket, causing damage or serious injury. s s

AC power cord

Unplug the AC power cord when moving the unit. Do not move the unit with the AC power cord plugged in. It may damage the AC power cord and result in fire or electric shock. Do not allow anything to rest on or roll over the power cord, and do not place the unit where the power cord is subject to wear or abuse.

Antennas

Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. s s
If the unit has been subjected to excessive shock by being dropped, or the cabinet has been damaged. If the unit does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. When the unit exhibits a distinct change in performance, it indicates need for service.

HDMI (High-Definition Multimedia Interface) Component video (480i/480p/720p/1080i) S VIDEO Composite video RF/Coaxial

L-AUDIO-R

When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure Auto YC in the Setup settings is set to On to view the S VIDEO input (see page 61).
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 18 Wednesday, June 1, 2005 4:07 PM

Basic Connections

Cable System or VHF/UHF Antenna System
Cable or VHF only or VHF/UHF
75-ohm coaxial cable Rear of TV VHF/UHF jack
From the Channel settings, select Cable On or Cable Off for your type of input signal.
A ferrite core is factory attached to the supplied 75-ohm coaxial cable. Do not detach the ferrite core from the coaxial cable. The ferrite core is attached to one end of (not the center of) the supplied 75-ohm coaxial cable. When connecting the cable to the TV, insert the end with the ferrite core into the VHF/UHF jack.
Cable Box/Digital Cable Box
z The supplied remote control can be programmed to operate your cable box (see Programming the Remote Control on page 34). z To change channels using the cable box, set your TV to channel 3 or 4 depending on the cable box channel output. z If you will be controlling all channel selection through your cable box, consider using the Channel Fix feature to set your TV to channel 3 or 4 (see page 53).
Use this hookup if: s You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels, and s You do not intend to hook up any other audio or video equipment to your TV. 1 Connect the coaxial connector from your cable service to the cable boxs IN jack. 2 Using the supplied 75-ohm coaxial cable, connect the cable boxs OUT jack to the TVs VHF/UHF jack.
Cable 75-ohm coaxial cable Rear of TV VHF/UHF jack

IN jack Cable box

OUT jack
Also, set Cable to On in the Channel settings (see page 53).
Notes on Using This Connection

To Do This. Do This.

Use the cable box/digital cable box Set up the remote control to operate the cable box/digital cable box Activate the remote control to operate the cable box/digital cable box Control cable box/digital cable box functions with the remote control Prevent the accidental switching of TV channels
Tune the TV to the channel the cable box is set to and then use the cable box to switch channels. Program the remote control. See Programming the Remote Control on page 34. Press SAT/CABLE (FUNCTION). See Operating a Cable Box on page 36. When using the cable box, you need the TV to stay on the channel the cable box is set to. You can use the TVs Channel Fix feature to lock in a specific channel. For details, see Using the Channel Settings on page 53.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 19 Wednesday, June 1, 2005 4:07 PM

Satellite Receiver and Cable/Antenna
This scenario shows a SAT Box connected through the video inputs and the Cable/Antenna connected through the VHF/UHF input. Satellite signals are selected by the SAT Box through the video inputs while TV signal is selected by the TV tuner.
To connect a satellite receiver
z If you connect the Digital Satellite Receiver with component video cables, see page 20.
1 Connect the satellite antenna cable to the satellite receivers satellite

input jack.

2 Use an A/V and S VIDEO cables to connect the satellite receivers 3 4
AUDIO and S VIDEO output jacks to the TVs AUDIO and S VIDEO input jacks (VIDEO 1 or 3). Connect the supplied 75-ohm coaxial cable from the antenna to the TVs VHF/UHF input jack. Run the Initial Setup program, as described in Setting Up the Channel List on page 30.
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
Satellite antenna cable 75-ohm coaxial cable

VHF/UHF

Satellite Receiver
Rear of TV S VIDEO cable S VIDEO VIDEO (yellow) AUDIO-L (white) A/V cable AUDIO-R (red)
S VIDEO VIDEO L (MONO) AUDIO 1 VIDEO IN R 3 Y PB PR L AUDIO R HD/DVD IN
Press WEGA GATE to select the Satellite input (Video 1, 2 or 3) in the External Inputs list. or Press TV/VIDEO repeatedly to select the satellite receiver input (Video 1, 2 or 3). Set up the remote control to operate the satellite You must program the remote control. See Programming the receiver Remote Control on page 34. Activate the remote control to operate the Press SAT/CABLE (FUNCTION). satellite receiver Control satellite receiver functions with the See Operating a Satellite Receiver on page 36. remote control Label video inputs to easily identify equipment See the instructions for setting up Label Video Inputs on page 61. connected to the TV Watch the satellite receiver
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 20 Wednesday, June 1, 2005 4:07 PM

HD Equipment

z If your equipment has an HDMI or DVI connector, see page 26.
Disconnect all power sources before making any connections.
1 Using a component video cable, connect your equipments YPBPR
output jacks to the TVs YPBPR input jacks. Use the HD/DVD IN 4 connections.
Component video (YPBPR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,280 dots 768 lines (KLV-S19A10) and 1,366 dots 768 lines (KLV-S23A10, KLV-S26A10 and KLVS32A10).
2 Using an audio cable, connect your equipments AUDIO output jacks to
the TVs AUDIO input jacks.

1 Use a DVI to HDMI adapter or cable to connect the devices DVIHDTV output connector to the TVs HDMI IN connector on the right side panel.
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound when a DVI to HDMI adapter is used. Do not connect a PC to the TVs HDMI input. Use the PC IN (RGB IN) connector instead when connecting a PC. Connecting the TV
2 Use an Audio cable to connect the devices AUDIO output jacks to the
TVs AUDIO input jacks on the right side panel.
DVI-HDTV-Equipped Device Right side of TV
DVI to HDMI adapter or cable
AUDIO-R (red) Audio cable AUDIO-L (white)
Press WEGA GATE to select the DVI-HDTV-equipped input (Video 5) in the External Inputs list. or Press TV/VIDEO repeatedly to select the DVI-HDTV-equipped device input (Video 5). See the instructions for setting up Label Video Inputs on page 61.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 28 Wednesday, June 1, 2005 4:07 PM

Personal Computer

To connect a PC (personal computer)
z When connecting to an Apple Macintosh computer, use the supplied HD15-HD15 cable to connect PC IN of the TV to video output connector of the computer. For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15HD15 cable. z If the picture is noisy, flickering or not clear adjust the Phase and Pitch in the Screen Settings on page 52.
If you connect your PC to the TV, you can watch your personal computers display on the TV. When your PC is connected to the TV with the supplied HD15-HD15 cable and optional audio cable, you can view and listen to the PCs video and audio output on the TV.

To PC IN (RGB IN) jack

Y PB PR L AUDIO R 3 HD/DVD IN

To PC AUDIO IN jack

AUDIO 1 VIDEO IN R
HD15-HD15 cable (analog RGB, supplied)
Audio cable (optional: stereo mini jack)

To D-Sub output terminal

Audio output terminal

Watch the PC

Press WEGA GATE to select the PC input (Video 6) in the External Inputs list. or Press TV/VIDEO repeatedly to select the PC input (Video 6). See the instructions for setting up Label Video Inputs on page 61.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 29 Wednesday, June 1, 2005 4:07 PM

Camcorder or PlayStation

For easy connection to a camcorder or PlayStation, the TV has left side A/V input jacks. If you prefer, you can connect the camcorder to the TVs rear A/V input jacks.

To connect a camcorder or PlayStation
Use an A/V and S VIDEO cables to connect the camcorder or PlayStation AUDIO and S VIDEO output jacks to the TVs AUDIO and S VIDEO input jacks (VIDEO 2) on the left side of panel.
If your camcorder is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. If you have a mono camcorder, connect its audio output jack to the TVs L MONO audio input jack.
PlayStation Camcorder Left side of TV
S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red)

To S VIDEO jack

To A/V output jack

S VIDEO cable A/V cable

Watch the camcorder or PlayStation
Press WEGA GATE to select the camcorder or game input (Video 2) in the External Inputs list. or Press TV/VIDEO repeatedly to select the camcorder or game input (Video 2). See the instructions for setting up Label Video Inputs on page 61.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US04INS.fm 01US02WAR-UC.book Page 30 Wednesday, June 1, 2005 4:07 PM
Setting Up the Channel List
After you finish connecting your TV, you need to run Initial Setup, which automatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel settings (see page 53).
The Auto Program feature does not apply for installations that use a cable box. The factory default setting for channel selection is Cable On. For antenna connections, run the Auto Program again after selecting Cable Off from the settings.

Using Initial Setup

To run Initial Setup the first time you turn on your TV
1 Press POWER to turn on the TV.
The Initial Setup screen appears.
2 Press V or v to select the on-screen display language. Then press
The message First please connect cable/antenna appears.
By default, Auto Program is set to scan cable TV channels.
3 Press CH + to start Auto Program.
Auto Program automatically creates a list of receivable channels. When finished, the lowest numbered channel is displayed. When all the receivable channels are stored, the Show/Hide Channels settings appear.
To scan available VHF/UHF antenna channels instead of the cable TV channels
1 Select Settings in WEGA GATE, then go to Channel settings. 2 Set Cable to Off. 3 Start Auto Program by pressing CH +.

You can reduce the power consumption of the TV.

POWER SAVING

Power Saving : Standard Power Saving : Reduced Power Saving : Picture Off
To cancel the Power Saving mode
Press POWER SAVING repeatedly until Power Saving: Standard appears.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US05REM.fm 01US02WAR-UC.book Page 40 Wednesday, June 1, 2005 4:07 PM

Using the Sleep Function

You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes).
z If you turn the TV off, and then turn it on again, the Sleep timer returns to Sleep Off. z TV will turn off soon appears one minute before the TV shuts off. This message may not appear if you are performing other operations in the settings. z You can set the Sleep timer to on using the Clock/Timers settings. Select Sleep in the Clock/Timers settings, then set it to 15, 30, 45, 60, 90 or Off.

Sleep : Off

Sleep : 15 Sleep : 30 Sleep : 45 Sleep : 60 Sleep : 90
While the Sleep timer is activated, the TIMER LED on the TV lights up in red.
To cancel the Sleep timer
Press SLEEP repeatedly until Sleep Off appears or turn the TV power to off then turn on the TV again.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US05REM.fm 01US02WAR-UC.book Page 41 Wednesday, June 1, 2005 4:07 PM
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US06USI.fm 01US02WAR-UC.book Page 42 Wednesday, June 1, 2005 4:07 PM

Overview of WEGA GATE

WEGA GATE provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. When you press the WEGA GATE button, you can perform basic TV operation: your favorite channels, watching TV, images from external equipment or setting menus.
1 Press WEGA GATE on the remote.

WEGA GATE

RETURN
WEGA GATE control panel appears.
Favorites TV List External Inputs

Settings

Show your Favorite Channels

Select:

Press V/v to highlight the item. Press to select.

Press WEGA GATE to exit.

G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US06USI.fm 01US02WAR-UC.book Page 43 Wednesday, June 1, 2005 4:07 PM
The WEGA GATE screen gives you access to the following items:

Icon Description

The Favorites feature lets you select programs from a list of up to 8 favorites channels that you specify. For details, see page 44.
Favorites The TV List feature lets you select TV programs from a list of channel labels. You can assign a label to the channel. For details, see page 45. Introducing WEGA GATE

G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 52 Wednesday, June 1, 2005 4:07 PM
z 4:3 Default and Overscan are not available for PC Input. Option Description

Overscan

z The setting of V Center and H Center can be between 50 and + 50 for PC input.
z H Center feature is useful if TV is connected to game equipment.
z Adjust Phase and Pitch with Wide Mode set to Normal.
Displays a standard size picture. Allows you to adjust the viewable picture area size. This is useful for viewing ticker tape or banners at the top or bottom of the screen. Not available for PC input. V Center Allows you to move the position of the picture up and down in (Vertical Center) the window. Available only in Wide Zoom and Zoom modes. Press V/v and press to choose a correction between +10 and 10 (Zoom mode), and +10 and 10 (Wide Zoom mode). H Center Allows you to move the position of the picture left and right in (Horizontal the window. This function allows for horizontal adjustment of Center) the picture being displayed. Adjust after Pitch to fine tune overall sharpness. Phase Available only for PC input. Pitch Adjust uneven sharpness on screen. Available only for PC input. Reset Clear Wide Mode, V Center, H Center, Phase and Pitch adjustments you made to the factory settings. Available only for PC input.

Normal +1/+2

PC Input Signal Compatibility Chart
Resolution Signals VGA Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) 31.5 37.9 37.5 31.5 35.2 37.9 46.9 48.1 31.0 48.4 56.47.4 47.8 60.3 47.7 Vertical frequency (Hz) VESA standard *

*: Corresponding to the VGA signal
This TV does not support Sync on Green or Composite Sync. If a signal other than in the above chart is input, it may not be displayed properly or may not be displayed as you set. Using the Vertical frequency (Hz) of the personal computer at 60 is recommended.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 53 Wednesday, June 1, 2005 4:07 PM
Using the Channel Settings
To select the Channel settings 1. Press 2. Select WEGA GATE Settings
Channel Favorite Channels Cable: On On Channel Fix: Off Off Auto Program: Show/Hide Channels Label Channels

3. Highlight Channel

To exit the Channel settings, press
Selecting Channel Options
z Also, you can access the Favorite Channels list on the WEGA GATE control panel.
The Channel settings includes the following options: To highlight an option and to change settings, press VvB b. Press to confirm the selection.

TV Lock: Select Country: Change Password Off Off Child Youth Young Adult Custom

3. Highlight Parent

Use 0-9 on the remote control to enter a four-digit password. The first time you create a password, confirm the password by entering it again. The Parent settings options appear. To exit the Parent settings, press.
You need your password for any future access into the Parent settings. If you lose your password, see Lost password. on page 64.

Selecting Parent Options

z If you are not familiar with the Parental Guideline rating system, you should select Child, Youth, or Young Adult to help simplify the rating selection. To set more specific ratings, select Custom.
The Parent settings includes the following options: To change settings, press VvB b. Press to confirm the selection.
Lock Off Turn ratings on/off and select a Child rating system
Parental lock is off. No programs are blocked from viewing.
z For descriptions of Child, Youth, and Young Adult ratings, see page 56.
Maximum ratings permitted are: s US: TV-Y, TV-G, G s Canada: C, G, TV-Y, TV-G Youth Maximum ratings permitted are: s US: TV-PG, PG s Canada: C8+, PG, 8ans+, TV-PG Young Adult Maximum ratings permitted are: s US: TV-14, PG-13 s Canada: 14+, 13ans+, TV-14 Custom Select to set ratings manually. s US: See page 56 for details. s Canada: See page 57 for details. Select to use USA ratings (see page 56). Select to use Canadian ratings (see page 57).
Select Country Change Password

U.S.A. Canada

For changing your password.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 56 Wednesday, June 1, 2005 4:07 PM
US Models: Selecting Custom Rating Options
z The Content-Based Ratings are linked to the level of the Age-Based Rating. For example, a program with an AgeBased Rating of TV-PG V (Violence) rating may contain moderate violence, while a TV-14 V (Violence) rating may contain more intense violence. z To ensure maximum blocking capability, set the Age-Based Ratings. z If you block unrated TV programs, be aware that the following types of programs may be blocked: programs broadcast from another country, emergency broadcasts, political programs, sports, news, public service announcements, religious programs and weather.

For US models, the Custom Rating menu includes the following options. For Canadian models, see page 57.

Movie Rating

G PG PG-13 R
All children and General Audience. Parental Guidance suggested. Parental Guidance for children under 13.
Restricted viewing, parental guidance is suggested for children under 17. NC-17 and X No one 17 or under allowed. TV Rating Block programs by their rating, content or both Age-Based Ratings TV-Y All children. TV-Y7 TV-G TV-PG TV-14 Directed to children age 7 and older. General Audience. Parental Guidance suggested. Parents Strongly cautioned.
TV-MA Mature Audience only. Content-Based Ratings FV D L S Unrated Block programs or movies that are Block broadcast without a rating V Allow Fantasy Violence. Suggestive Dialogue. Strong Language. Sexual situations. Violence. Allows programs and movies that are broadcast without a rating. Blocks all programs and movies that are broadcast without a rating.

Viewing Blocked Programs

You can view blocked programs by entering the password. Press ENT when tuned to a blocked program, then enter the password. This temporarily switches off Parent. To reactivate the Parent settings, turn off the TV. When the TV is turned on again, your Parent settings are reactivated.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 57 Wednesday, June 1, 2005 4:07 PM
Canadian Models: Selecting Custom Rating Options
For Canadian models, the Custom Rating menu includes the following options. For US models, see page 56.

English Rating

C C8+ G PG 14+ 18+
All children. Children 8 years and older. General programming. Parental Guidance. Viewers 14 and older. Adult programming. General programming. Not recommended for young children. Not recommended for ages under 13. Not recommended for ages under 16. Using the Settings

French Rating

G 8ans+ 13ans+ 16ans+

U.S.A. Rating

18ans+ Programming restricted to adults. See US Models on page 56 for details.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 58 Wednesday, June 1, 2005 4:07 PM
Using the Clock/Timers Settings
To Select the Clock/Timers settings 1. Press 2. Select WEGA GATE Settings
Clock/Timers Sleep: Timer 1: Timer 2: Current Time Off Off 15 Off minutes 30 Off minutes 45 minutes 60 minutes 90 minutes

3. Highlight Clock/Timers
To exit the Clock/Timers settings, press
Selecting Clock/Timers Options
The Clock/Timers settings includes the following options: To highlight an option and to change settings, press VvB b. Press to confirm the selection.
Set the time in minutes (15 minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes, or Off) that you want the TV to remain on before shutting off automatically. You can use the Timers to program the TV to turn on and off and tune to a specific channel at two scheduled viewing times. Timer 1 and Timer 2 are not available to be set until you set the Current Time. 1 Press V/v to highlight Timer 1 or Timer 2. To set the timer, press b or. 2 Press V/v to highlight one of the following options, then press. Set On Off Select to set the Timer by day, time, duration, and channel. Select to turn on the timer. Select to turn off the Timer. (Your previous settings are saved.)
z To return to the Timer settings after programming one of the Timers or current time, press B.

Timer 1 Timer 2

z Timer will be set to Off when: Auto Program is executed Channel Fix is set the AC power cord is disconnected and then reconnected to turn the TV on and the Current Time is displayed as --:-- --.
If you selected Set in step 2, press V/v to set the day(s), hour, minute, duration, and channel number. Press or b to confirm each setting and move to the next setting. Press B to go back to the previous setting and select On to turn on the timer. TIMER LED on the front panel will light, indicating the timer has been set. Press WEGA GATE to exit Settings.
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US07MEN.fm 01US02WAR-UC.book Page 59 Wednesday, June 1, 2005 4:07 PM

Current Time

Select to set the current time (day, hour, minute, and AM/PM).
Press to select Current Time. Press V/v to set the current time (day, hour, minute, and AM/PM). Press or b to confirm each setting and move to the next setting. Press B to go back to the previous setting. Press WEGA GATE to exit Settings.

VIDEO IN 1/2/3:

S VIDEO (4-pin mini DIN): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative C: 0.286 Vp-p (Burst signal), 75 ohms VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (100% modulation) Impedance: 47 kilohms

Power consumption:

In use: KLV-S19A10: 95 W KLV-S23A10: 110 W KLV-S26A10: 120 W KLV-S32A10: 155 W KLV-S19A10: Less than 1.3 W KLV-S23A10/KLV-S26A10/ KLV-S32A10: Less than 1 W

In standby:

HD/DVD IN 4:
YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms Signal format: 480i, 480p, 720p, 1080i AUDIO: 500 mVrms (100% modulation) Impedance: 47 kilohms

Dimensions (W/H/D):

KLV-S19A10: (with stand) 218 mm (18 1/7/5/8 inches) (without stand) 84 mm (18 1/3/3/8 inches) KLV-S23A10: (with stand) 218 mm (22 3/3/5/8 inches) (without stand) 89 mm (22 3/1/5/8 inches) KLV-S26A10: (with stand) 309 mm (3/1/4 inches) (without stand) 90 mm (3/5/8 inches) KLV-S32A10: (with stand) 309 mm (31 1/12 1/4 inches) (without stand) 99 mm (31 1/1/inches)

HDMI IN 5:

HDMI: Video: 480i, 480p, 720p, 1080i Audio:Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits 500 mVrms (100% modulation) Impedance: 47 kilohms

AUDIO:

AUDIO OUT:
500 mVrms (100% modulation) More than 1 Vrms at the maximum volume setting (Variable) More than 500 mVrms (Fixed)

PC IN 6:

D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Compatibility Chart on page 52

PC AUDIO INPUT:

Stereo mini jack, 0.5 Vrms, 1 kilohm
G:\SONY\03 TV\834494S KLV-S1932A10_EN\0601_EN\2589826131\2589826131 KLVS1932A10_US\01US08OTH.fm 01US02WAR-UC.book Page 66 Wednesday, June 1, 2005 4:07 PM

Other Information Mass:

KLV-S19A10: (with stand) 9.9 kg (21 lb. 14 oz.) (without stand) 6.3 kg (13 lb. 15 oz.) KLV-S23A10: (with stand) 12.3 kg (27 lb. 2 oz.) (without stand) 8.7 kg (19 lb. 3 oz.) KLV-S26A10: (with stand) 16.6 kg (36 lb. 10 oz.) (without stand) 12.8 kg (28 lb. 4 oz.) KLV-S32A10: (with stand) 20.5 kg (45 lb. 4 oz.) (without stand) 16.7 kg (36 lb. 14 oz.)

Supplied accessories:

Remote control RM-YA001 (1) Size AA batteries (2) 75-ohm coaxial cable (1) AC power cord (1) AC power adaptor (1) (KLV-S19A10 only) HD15-HD15 cable (1) Support belt (1), securing screw (1) and wood screw (1) Operating Instructions (1) Quick Setup Guide (1) Leaflet (Installing the Wall-Mount Bracket, KLV-S19A10 only) (1) Warranty Card (1)

doc1

AVERTISSEMENT!! ATTENTION AUX COMPOSANTS RELATIFS LA SCURIT!! LES COMPOSANTS IDENTIFIS PAR UNE TRAME ET UNE MARQUE ! SONT CRITIQUES POUR LA SCURIT. NE LES REMPLACER QUE PAR UNE PICE PORTANT LE NUMRO SPECIFI. LES RGLAGES DE CIRCUIT DONT LIMPORTANCE EST CRITIQUE POUR LA SCURIT DU FONCTIONNEMENT SONT IDENTIFIS DANS LE PRSENT MANUEL. SUIVRE CES PROCDURES LORS DE CHAQUE REMPLACEMENT DE COMPOSANTS CRITIQUES, OU LORSQUUN MAUVAIS FONCTIONNEMENT EST SUSPECT.
LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The limit indication is 0.75 V, so analog meters must have an accurate lowvoltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOMs that are suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)
To Exposed Metal Parts on Set

0.15 F

AC Voltmeter (0.75 V)

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

TABLE OF CONTENTS

1. SELF-DIAGNOSIS FUNCTION.. 1-1 2. DISASSEMBLY.. 2-1
2-1. KLV-S26A10/S32A10.. 2-1-1. STAND ASSY REMOVAL. 2-1-2. REAR CABINET ASSY REMOVAL.. 2-1-3. H1E BOARD REMOVAL.. 2-1-4. VESA BRACKET ASSY REMOVAL. 2-1-5. SIDE BRACKET ASSY AND S1 TOP SHIELD REMOVAL. 2-1-6. G2 AND H2 BOARDS REMOVAL. 2-1-7. GE2 BOARD REMOVAL.. 2-1-8. A2G BOARD REMOVAL.. 2-1-9. BG BOARD REMOVAL.. 2-1-10. H3 BOARD AND SPEAKER REMOVAL. 2-1-11. LCD PANEL REMOVAL.. 2-2. KLV-S40A10... 2-2-1. STAND ASSY REMOVAL. 2-2-2. REAR CABINET ASSY REMOVAL.. 2-2-3. H1E BOARD REMOVAL.. 2-2-4. VESA BRACKET ASSY REMOVAL. 2-2-5. SIDE BRACKET ASSY AND S1 TOP SHIELD REMOVAL. 2-2-6. H2 BOARD REMOVAL. 2-2-7. G3 BOARD REMOVAL. 2-2-8. A2G BOARD AND GE2 BOARD REMOVAL. 2-2-9. BG BOARD REMOVAL.. 2-2-10. H3 BOARD AND SPEAKER REMOVAL. 2-2-11. LCD PANEL REMOVAL.. 2-1 2-1 2-1 2-2 2-2 2-3 2-3 2-4 2-4 2-5 2-5 2-6 2-7 2-7 2-7 2-8 2-8 2-9 2-9 2-10 2-10 2-11 2-11 2-12

6. EXPLODED VIEWS.. 6-1

3 Four screws (+PSW 5x16)

2 Hinge cover

4 Stand assy
2-1-2. REAR CABINET ASSY REMOVAL

1 Ten screws (+B M4x6)

2 One screw (+BVTP 3x10) 1 Eight screws (+PSW 4x10)

2 One screw (+BVTP 3x10)

3 Rear cabinet assy (26G)
3 Rear cabinet assy (32G)

KLV-S32A10

2-1-3. H1E BOARD REMOVAL
3 Button shield 4 H1E board

2 Three screws (B2)

5 Multi button 1 Button cover
2-1-4. VESA BRACKET ASSY REMOVAL

1 Two screws (+B M4X6)

1 Four screws (+PSW 4X10)

2 VESA bracket assy (26)

2 VESA bracket assy (32)
2-1-5. SIDE BRACKET ASSY AND S1 TOP SHIELD REMOVAL
3 Five screws (+BVTT 3X6) 1 Two screws (+BVTT 3X6) 2 Side bracket assy (G) 4 S1 top shield (UL)
Harness with connector (LVDS)
2-1-6. G2 AND H2 BOARDS REMOVAL

5 Six screws (+BVTT 3X6)

3 Two screws (+BVTP 3X10) 4 H2 board 1 Two screws (+BVTT 3X6)

6 G2 board

2 Side jack holder assy (G)

7 Tapping card spacer

2-1-7. GE2 BOARD REMOVAL
1 Three screws (+BVTT 3X6) 2 GE2 board

2-1-8. A2G BOARD REMOVAL

4 Two screws (+BVTT 3X6) 5 AC bracket 6 Two screws (+B M4X6) 7 Three screws (+BVTP 4X12)
7 Three screws (+BVTP 4X12)

8 Hinge support (32)

6 One screw (+PSW 4X10) 3 A2G board 2 Six screws (+BVTT 3X6) 8 Hinge support (26) 1 Coaxial cable

2-1-9. BG BOARD REMOVAL

3 Five screws (+BVTT 3X6) 2 Connector assy 49P

4 BG board

5 One screw (+BVTT 3X6)

6 S1 main shield (U)

1 Two screws (HEX)
2-1-10. H3 BOARD AND SPEAKER REMOVAL
1 One screw (+PWH 4x16 : KLV-S26A10) (+BVTP 4x25 : KLV-S32A10) 2 Speaker plate assy
3 One screw (+PWH 4x16 : KLV-S26A10) (+BVTP 4x25 : KLV-S32A10)
qa One screw (+BVTP 3X10) qs H3 board

5 Speaker

4 Speaker plate assy 6 One screw (+PWH 4x16 : KLV-S26A10) (+BVTP 4x25 : KLV-S32A10) 8 One screw (+PWH 4x16 : KLV-S26A10) (+BVTP 4x25 : KLV-S32A10) 7 Speaker plate assy

9 Speaker plate assy

0 Speaker
2-1-11. LCD PANEL REMOVAL
1 Four screws (+B M4x6 : KLV-S26A10) (+PSW 5x8 : KLV-S32A10)
2 Eight screws (+BVTP 4X12)
2 Four screws (+BVTP 4X12)

2 One screw (+BVTP 4X12)

3 LCD bracket assy
5 Harness with connector (LVDS) 6 Connecter assy 14P

4 LCD panel

2-2. KLV-S40A10
2-2-1. STAND ASSY REMOVAL
1 Four screws (+PSW 5X16)

2 Stand assy

2-2-2. REAR CABINET ASSY REMOVAL
2 Seven screws (+BVTP 3X10) 1 Eight screws (+PSW 4X10)

3 Rear cabinet assy (40G)

2-2-3. H1E BOARD REMOVAL

3 Shield, button 4 H1E board
1 Button block assy 5 Multi button
2-2-4. VESA BRACKET ASSY REMOVAL

1 Two screws (+BVST 3X6)

4 Four screws (+BVST 4X8) 2 G shield assy (TOP) 5 VESA barcket assy(40)L 3 One screw (+PSW 5X12) 6 One screw (+PSW 5X12) 7 VESA support(40) 0 VESA barcket assy(40)R 8 One screw (+PSW 5X12)
qd Four screws (+BVTP2 4X12)
9 Four screws (+BVST 4X8)
qs VESA support(40) qf Under cover(40)

qa One screw (+PSW 5X12)

2-2-5. SIDE BRACKET ASSY AND S1 TOP SHIELD REMOVAL
3 Six screws (+BVST 3X6) 1 Two screws (+BVST 3X6) 4 S1 top shield (UL) 2 Side bracket assy (G)

2-2-6. H2 BOARD REMOVAL

3 Two screws (+BVTP 3X10) 4 H2 board 1 Two screws (+BVST 3X6) 2 Holder side jack (G) assy

2-2-7. G3 BOARD REMOVAL

2 Two screws (+KTT 3X10) 3 AC inlet (with noise filter) 1 One screw (+PSW 4X8)
4 Seven screws (+BVST 3X6)

5 G3 board

2-2-8. A2G BOARD AND GE2 BOARD REMOVAL
2 Five screws (+BVST 3X6)
4 Three screws (+BVTT 3X6) 5 GE2 board 3 A2G board

1 Coaxial cable

2-2-9. BG BOARD REMOVAL
2 Five screws (+BVTT 3X6) 3 Connector assy 49P
4 BG board 5 One screw (+BVST 3X6) 6 S1 main shield (U)
2-2-10. H3 BOARD AND SPEAKER REMOVAL
1 Two screws (+PWH 4X16) 5 One screw (+BVTP 3X10) 2 Speaker 6 H3 board 3 Two screws (+PWH 4X16)

4 Speaker

2-2-11. LCD PANEL REMOVAL
1 Five screws (+BVTP2 4X12)

2 Speaker

1 Six screws (+BVTP2 4X12)
2 LCD bracket assy 1 Five screws (+BVTP2 4X12) 4 Conector assy 14P
5 Harness with connector (LVDS)

3 LCD panel

SECTION 3 ADJUSTMENTS

3-1. Signal Adjustment

Service adjustments to this model can be performed using the supplied remote Commander RM-EA002 or RM-ED002. How to enter into the Service Mode 1. 2. Turn on the power to the TV set and enter into the stand-by mode. Press the following sequence of buttons on the Remote Commander.
3-2. White Balance Adjustment
3-2-1. White Balance adjustment (H/L) 1. Select AV1. 2. Change the TV to Custom Mode and set the following registers by sending TT54.
COLORTONE U_PIC_OFFSET NEUTRAL MAX MAX OFF 0 OFF STANDARD

(ON SCREEN DISPLAY)

(DIGIT 5)

(VOLUME +) (TV)

U_BRT_OFFSET U_COLOR_OFFSET COLOR_EMH CONTRAST BRIGHTNESS COLOR HUE SHARPNESS BACKLIGHT AUTO NR BLACK_ST TABLE LIGHT SENSOR POWER SAVING

3-2-4. SECAM White Balance adjustment (C/O) 1. Select AV0. 2. Change the TV to Custom Mode and set the following registers by sending TT54.

3-3. TEST TEST MODE

Test Test Mode is available in Service Mode, OSD TT appears. The functions described below are available by selecting the two numbers. To release Test Test mode, press 00 or switch the TV set into Stand-by mode.
99 'T T ' m o d e o f f P ic tu r e m a x im u m P ic tu r e m in im u m Set Volum e to 35% Set Volum e to 50% Set Volum e to 65% Set Volum e to 80% A g e in g m o d e S h ip p in g C o n d itio n Picture level 50% Factor y M ode toggle (on/off) U D e s tin a tio n A E P D e s tin a tio n C B A m o d e to g g le ( O N /O F F ) GA Destination CHINA Destination E C S m o d e to g g le ( O N /O F F ) S e t B C N c h a n n e ls p r e s e t F IL M O D E to g g le ( O N /O F F ) S e t IN Y c h a n n e ls p r e s e t R e - in itia lis e N V M S e le c t D u a l S o u n d A S e le c t D u a l S o u n d B S e le c t D u a l S o u n d M o n o S e le c t D u a l S o u n d S te r e o S e t N V M a s n o n - v ir g in S e t N V M a s v ir g in PAL Auto adjustm ent RG B Auto adjustm ent SECAM Auto adjustm ent W B In it c o n d itio n s Watchdog toggle R e s e t a ll c h a n n e l a tte n u a tio n s NTSC Auto adjustment Toggle Digital m ode flag A M fro m b a s e b a n d (A F R IC ) s e t " s e ttin g s M SP Auto Carrier M ute function enable/disable S e t " s e ttin g s S e t " s e ttin g s S e t " s e ttin g s S e t " s e ttin g s B a la n c e to c e n te r p o s itio n Volum e m aximum Volum e m inimum B a la n c e fu ll le ft B a la n c e fu ll r ig h t Digital BER display D ig ita l S e r v ic e m e n u D ig ita l c o lo u r b a r o u tp u t fr o m D E N C T S C I p a th th ro u g h D i g i t a l t u n e r p ow e r d ow n S w itc h b e tw e e n tw o d ig ita l S W b a n k s Local keys test D ig ita l s h ip p in g c o n d itio n s L E D te s t I2S / analogue audio used for Digital sound D i g i t a l D e bu g o u p u t : E n a bl e / D i s a bl e D i g i t a l 6 o u t p u t E n a bl e / D i s a bl e Digital Auto Reset function Enable / Disable Display Error and Working Tim e m enu
3. Input SECAM CVBS 20 IRE Full Field Signal to AV1. 4. Adjust CutOff registers: SECAM_OFFSET_RC (R cutoff) SECAM_OFFSET_BC (B cutoff) Low light (Cut Off) adjustment value (9300K-0MPCD)
SECTION 4 TROUBLESHOOTING
Check whether the 1 (standby) indicator is flashing in red.

When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing.
For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.
Press 1 on the TV (top side) to switch it off, disconnect the AC power cord, and inform your dealer or Sony service center of how the indicator flashes (duration and interval).
When it is not flashing 1 Check the items in the tables, below. 2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

Problem
No picture (screen is dark) and no sound No picture
C ause/Remedy Check the power cord, antenna, and VCR connection. The TV is not turned on. Press 1 on the TV (top side). If the 1 (standby) indicator lights up in red, press "/1. The picture off feature is activated. (The (Picture Off/Sleep Timer) indicator lights up in green.) Press any button except for 2 +/-, "/1, %, 9 to cancel the picture off feature. Check that the optional equipment is on and press / repeatedly until the correct input symbol is displayed on the screen. Check the connection between the optional equipment and the TV. Check if any connected optional equipment is installed in front of the TV or beside the TV. When installing optional equipment, leave some space between the optional equipment and the TV. When changing programs or selecting Text, turn off any equipment connected to the video input jack on the rear of the TV. Broadcast signals are too strong. Turn off or disconnect the booster if it is in use. Check antenna/cable connections. Check the antenna location and direction. Contact a Sony dealer for advice. Broadcast signals are reflected by nearby mountains or building. Use the fine tuning (Fine) function (page 35). Otherwise, use a highly direction antenna. Use of a booster is inappropriate. Turn off or disconnect the booster if it is in use. The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 15). Channel presetting is inappropriate or incomplete. Perform Manual Program in the Set Up menu to preset the channel again (page 34). The antenna type is inappropriate. Check the antenna type (VHF/UHF). Contact a Sony dealer for advice. The antenna direction needs adjustment. Adjust the antenna direction. Contact a Sony dealer for advice. Signal transmission is low. Try using a booster.

No picture or no menu information from equipment connected to the video input jack Distorted picture
Double images or ghosting
Snowy picture and noisy sound
Only snow and noise appear on the screen Picture (dotted lines or stripes) noise
C ause/Remedy Check if the antenna is broken or bent. Check if the antenna has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Keep the TV away from electrical noise sources such as cars, motorcycles, or hair-dryers, etc. Make sure that the antenna is connected using the antenna cable (supplied). Keep the antenna cable away from other connecting cables. Do not use a 300-ohm twin lead cable as interference may occur. Adjust the antenna direction for the minimum interference. Contact a Sony dealer for advice. Select Manual Program in the Set Up menu and adjust Fine to obtain better picture reception (page 35). Select NR (Noise Reduction) in the Picture menu to reduce the noise in the picture (page 25). Video head interference. Keep your VCR away from the TV. Leave a space of 30 cm between your VCR and the TV to avoid noise. Avoid installing your VCR in front of the TV or beside the TV. The TV system setting is inappropriate. If the sound of all the channels are noisy, perform Auto Program in the Set Up menu to preset the channel again (page 32). If the sound of some channels is noisy, select the channel, then perform Manual Program in the Set Up menu, and select the appropriate TV system (TV System) (page 34). The volume level is too low. Press 2 + to increase the volume level. The sound is muted. Press %, or 2 + to cancel the muting. The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. Select Reset in the Picture menu to return to the factory settings (page 25). The color intensity setting is too low. Select Color in the Picture menu to adjust the color intensity (page 24). The antenna direction needs adjustment. Adjust the antenna direction. Contact a Sony dealer for advice. There is interference from external sources, e.g., heavy machineries, broadcast station nearby. Use the fine tuning (Fine) function (page 35). Check the connection of the Y, PB/CB, PR/CR jacks of / 1, 2. / 1, 2 are firmly seated Make sure that the Y, PB/CB, PR/CR jacks of in their respective jacks.
Picture noise when viewing a TV channel
Stripe noise during playback/ recording of a VCR Good picture, but noisy sound
Good picture, but no sound
Some tiny black points and/or bright points on the screen No color on programs No color
Lines moving across the TV scree No color or irregular color when viewing a signal from the Y, PB/CB, PR/CR jacks of / 1, 2

No sound, but good picture Noisy sound High is selected in Audio Filter when you use Mono. Stereo broadcast sound switches on and off, or is distorted; The sound switches between stereo and monaural frequently No sound from the computer
C ause/Remedy Press 2 +/ or % (Mute). Check that TV Speakers is set to On in the Features menu (page 29). See the Picture (dotted lines or stripes) noise cause/remedy on page 41. Set to Low. The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 15). Adjust the antenna direction for the minimum interference. Contact a Sony dealer for advice. Signal transmission is low. Try using a booster. Otherwise, use the fine tuning (Fine) function (page 35). Check the connection of the audio cable (page 36).

General

The TV turns off automatically (the TV enters standby mode) Some input sources cannot be selected The remote does not function The wide screen mode changes spontaneously when Auto Wide is On
C ause/Remedy Check if the Sleep function is activated (page 31). Power Saving is set to On when a PC is connected. Select AV Preset in the Set Up menu and cancel Skip of the input source (page 34). Replace the batteries. During a transition between two programs, the TV detects the optimum wide screen mode. During this period, an irregular wide screen mode may appear. The wide mode is switched automatically according to the revised signal with a Wide ID signal. The Auto Wide feature stops working temporarily when you press , and resumes after a while. To fix in the manually selected wide screen mode, set Auto Wide to Off in the Screen menu (page 28). Your area may not be able to receive Teletext. Teletext is displayed only in the area that is covered by Teletext services. The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 15). The antenna direction needs adjustment. Adjust the antenna direction. Contact a Sony dealer for advice. Signal transmission is too low. Try using a booster. Using the fine tuning (Fine) function may improve the picture (page 35). Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with your TV. For details, see the instruction manual supplied with the video game software. Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. This is the same static discharge that is felt when touching metal door handles or car doors especially when the air is dry, for example in winter. This does not indicate a malfunction.

KLV-S26A10 56

ASSY, BUTTON MULTI (26G) (KLV-S26A10) X-2067-375-1 BUTTON, MULTI ASSY (32G) (KLV-S32A10) * A-1128-518-A H1E MOUNT 4-908-792-41 SCREW (B2) 4-660-752-01 TAPE (LCD) X-2067-415-1 HOLDER SIDE JACKG ASSY * A-1133-348-A 2-320-333-01 X-2055-719-1 4-099-816-11 * 4-091-098-02 H2 MOUNT SCREW +B M4X6 BRACKET SIDE ASSY (G) TAPE (SP C2) GASKET (F) (KLV-S26A10)

X-2067-370-1

61 #1 #5 #6
4-088-215-01 7-685-647-79 7-682-962-09 7-685-871-01
GASKET (13X13) (KLV-S32A10) SCREW +BVTP 3X10 TYPE2 IT-3 SCREW +PSW 4X10 (KLV-S32A10) SCREW +BVTT 3X6 (S)
KLV-S26A10/S32A10 6-1-3. CHASSIS-2

KLV-S32A10 102

* A-1161-869-A G2 COMPL * 4-650-917-01 SPACER, TAPPING CARD (KLV-S32A10) * A-1132-757-A A2G COMPL 2-320-333-01 SCREW +B M4X6 * 4-098-165-01 CLAMPER (KLV-S26A10) 1-819-594-11 2-596-649-01 1-831-401-11 * A-1163-007-A AC INLET (WITH NOISE FILTER) +KTT 3X10 (S TYPE) CABLE, COAXIAL GE2 MOUNT

#5 #6 #7 #8

7-682-962-09 7-685-871-01 7-685-661-79 7-682-663-09
SCREW +PSW 4X10 SCREW +BVTT 3X6 (S) SCREW +BVTP 4X12 TYPE2 N-S SCREW +PSW 4X12
KLV-S26A10/S32A10 6-1-4. CHASSIS-3

KLV-S26A10

155 KLV-S26A10 153

153 KLV-S32A154

1-910-020-96 2-586-173-01 4-088-215-01 4-635-966-01 A-1154-534-A
CONNECTOR ASSY 49P SHEET A, RADIATION GASKET (13X13) (KLV-S26A10) SCREW (HEX) BG COMPL

7-685-871-01

SCREW +BVTT 3X6 (S)
KLV-S26A10/S32A10 6-1-5. CHASSIS-4

KLV-S32A207

203 204
1-830-355-21 * 4-098-165-01 1-910-016-34 1-910-022-14 1-826-063-21 1-826-042-11
2-580-642-01 4-302-404-03
HARNESS WITH CONNECTOR (LVDS) CLAMPER (KLV-S26A10) CONNECTOR ASSY 14P (KLV-S32A10) CONNECTOR ASSY 14P (KLV-S26A10) LOUDSPEAKER (4.2X15CM) (KLV-S26A10) LOUDSPEAKER (5X15CM) (KLV-S32A10) SCREW +BVTP2 4X25 (KLV-S32A10) TAPPING SCREW (+PWH 4X16) (KLV-S26A10)

* * * *

2-515-684-01 A-1133-349-A 2-629-956-01 4-098-165-01 7-685-647-79 7-685-871-01
GUIDE, LIGHT SENSOR H3 MOUNT A2E BRACKET CLAMPER SCREW +BVTP 3X10 TYPE2 IT-3 SCREW +BVTT 3X6 (S)
KLV-S26A10/S32A10 6-1-6. LCD PANEL

257 254

#7 #7 #7

256 255

251 252
X-2067-420-1 X-2067-411-1 1-805-871-21 1-805-870-21
2-320-333-01 4-660-752-01 * 4-094-278-01
BEZEL ASSY (26G) (KLV-S26A10) BEZEL ASSY (32G) (KLV-S32A10) LCD PANEL(26INCH WXGA+TFT) (KLV-S26A10) LCD PANEL(32INCH WXGA+TFT) (KLV-S32A10) SCREW +B M4X6 TAPE (LCD) SHEET, HOLD (KLV-S32A10)

BEZEL ASSY (40G) LCD PANEL SCREW, +BVTP2 4X12 SCREW, +PSW M4X8
6-3. PACKING MATERIALS (KLV-S26A10)
* 2-638-438-01 2-636-571-11 2-636-572-21 X-2055-287-2 2-593-320-02
SPACER MANUAL, INSTRUCTION GUIDE, QUICK SET UP BAG ASSY, RUDDER LOCK SCREW, CION (M6X18) SCREW,WOOD +R 3.1X13 POWER-SUPPLY CORD CABLE, ANTENNA (WITH FILTER) CABLE ASSY (15PDSUBCONNECTORX2) BOARD, TOP
1-479-524-11 2-638-439-01 4-377-015-01 2-638-440-01 2-638-436-01
REMOTE COMMANDER (RM-SA003) CUSHION (UPPER) BAG,PROTECTION CUSHION (LOWER) INDIVIDUAL CARTON
606 7-621-853-! 1-830-877-1-769-175-1-830-686-* 2-638-437-01
6-4. PACKING MATERIALS (KLV-S32A10)

662 664

* 2-638-443-01 2-636-571-11 2-636-572-21 X-2055-287-2 7-621-853-30
SPACER MANUAL, INSTRUCTION GUIDE, QUICK SETUP BAG ASSY, RUDDER LOCK SCREW, WOOD +R 3.1X13 SCREW, COIN (M6X18) POWER SUPPLY CORD SET CABLE, ANTENNA (WITH FILTER) CABLE ASSY (15PDSUBCONNECTORX2) BOARD, TOP
1-479-524-11 2-638-444-01 4-377-015-01 2-638-445-01 2-638-441-01
REMOTE COMMANDER (RM-SA003) CUSHION (UPPER) BAG, PROTECTION CUSHION (LOWER) INDIVIDUAL CARTON
656 2-593-320-! 1-830-877-1-769-175-1-830-686-* 2-638-442-01
6-5. PACKING MATERIALS (KLV-S40A10)

707 708

711 714
X-2102-511-1 2-593-320-02 2-580-663-01 2-659-712-01 2-636-571-11 2-636-572-21 2-651-192-11
BAG ASSY, RUDDER LOCK SCREW, CION (M6X18) SCREW, WOOD 3.8X20 BOARD,TOP MANUAL, INSTRUCTION GUIDE, QUICK SET UP MANUAL (WALL MOUNT INSTRUCTION) CORD, POWER CABLE, ANTENNA (WITH FILTER) CABLE ASSY (15PDSUBCONNECTORX2)
1-479-524-11 2-651-139-01 2-651-128-01 2-632-670-01 2-651-140-01
REMOTE COMMANDER (RM-SA003) CUSHION (UPPER) INDIVIDUAL CARTON BAG, POROTECTION CUSHION (LOWER) TRAY JOINT
* 2-651-129-01 * 4-081-035-01
708 ! 1-830-877-1-769-175-1-830-686-11
SECTION 7 ELECTRICAL PARTS LIST
All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. RESISTORS All resistors are in ohms F : nonflammable
Les composants identifis par la marque ! sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. When indicating parts by reference number, please include the board name.

No. 73 74

Board GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2 GE2
Type CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CONNECTOR CONNECTOR CONNECTOR DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE FUSE FUSE FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD IC IC IC IC IC IC COIL

No. 1405 1406

Type DIODE DIODE DIODE DIODE DIODE DIODE DIODE FUSE FERRITE BEAD FERRITE BEAD FUSE HOLDER FUSE HOLDER IC IC IC IC IC IC IC COIL COIL COIL COIL COIL COIL COIL PHOTO COUPLER PHOTO COUPLER PHOTO COUPLER PHOTO COUPLER PHOTO COUPLER PHOTO COUPLER TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR
Ref. No. D6505 D6506 D6509 D6510 D6511 D6512 D6513 F6000 FB6100 FB6101 FH6000 FH6001 IC6100 IC6200 IC6300 IC6301 IC6402 IC6502 IC6503 L6000 L6001 L6201 L6202 L6300 L6500 L6502 PH6000 PH6100 PH6300 PH6400 PH6402 PH6501 Q6100 Q6101 Q6400 Q6401 Q6402 Q6403 Q6404 Q6500 Q6501 Q6502 Q6503 Q6504 R6001 R6002 R6003 R6004 R6014 R6016 R6101 R6102 R6103 R6104 R6105 R6106 R6107 R6108 R6109 R6110 R6111 R6114 R6116 R6117 R6118 R6119 R6122 R6123 R6127 R6200 R6201 R6203 R6204 R6205
Part No. 8-719-054-59 8-719-054-59 6-500-108-01 6-500-137-01 8-719-081-97 8-719-081-97 8-719-081-97 1-576-867-11 1-410-397-21 1-410-397-21 1-533-223-11 1-533-223-11 6-706-852-01 8-759-682-42 6-600-279-01 8-759-682-42 8-759-682-42 6-704-815-01 8-759-682-42 1-456-678-11 1-456-678-11 1-406-971-21 1-406-971-21 1-414-934-21 1-457-039-12 1-456-982-11 6-600-187-01 6-600-187-01 6-600-187-01 6-600-187-01 6-600-187-01 6-600-187-01 6-551-297-01 6-551-297-01 8-729-804-41 8-729-120-28 8-729-023-22 8-729-026-49 8-729-120-28 6-551-336-01 8-729-820-90 8-729-804-41 8-729-026-49 8-729-120-28 1-240-938-91 1-240-251-11 1-247-752-11 1-216-829-11 1-215-859-00 1-243-681-71 1-249-385-11 1-202-933-61 1-218-823-11 1-218-871-11 1-218-760-11 1-218-760-11 1-218-760-11 1-208-836-11 1-208-834-11 1-218-863-11 1-218-873-11 1-211-969-11 1-216-009-91 1-216-009-91 1-216-833-11 1-216-833-11 1-245-315-71 1-218-847-11 1-216-857-11 1-216-821-11 1-216-821-11 1-216-829-11 1-218-843-11 1-218-865-11
Description DIODE FSF05A60 DIODE FSF05A60 DIODE EP05FA20 DIODE BAT54HT1 DIODE MMDL914T1 DIODE MMDL914T1 DIODE MMDL914T1 FUSE 4A 250V FERRITE 1.1UH FERRITE 1.1UH FUSE HOLDER 0A 0V FUSE HOLDER 0A 0V IC CXD9841M IC MM1431ATT IC STR-A6169 IC MM1431ATT IC MM1431ATT IC FA5501N-TE1 IC MM1431ATT LINE FILTER COIL LINE FILTER COIL INDUCTOR 10UH INDUCTOR 10UH INDUCTOR 10UH INDUCTOR 110UH INDUCTOR 295UH PHOTO COUPLER PC123Y22JOOF PHOTO COUPLER PC123Y22JOOF PHOTO COUPLER PC123Y22JOOF PHOTO COUPLER PC123Y22JOOF PHOTO COUPLER PC123Y22JOOF PHOTO COUPLER PC123Y22JOOF TRANSISTOR 2SK3568(LBS1SONY.Q TRANSISTOR 2SK3568(LBS1SONY.Q TRANSISTOR 2SB1122-S TRANSISTOR 2SC1623-L5L6 TRANSISTOR 2SD2114K TRANSISTOR 2SA1037AK-T146-R TRANSISTOR 2SC1623-L5L6 TRANSISTOR 2SK3934(LBS1SONY.Q TRANSISTOR 2SD1621-ST TRANSISTOR 2SB1122-S TRANSISTOR 2SA1037AK-T146-R TRANSISTOR 2SC1623-L5L6 METAL 1.5M 5% 0.5W CEMENTED 6.8 5% 10W CARBON 1K 5% 1/2W METAL CHIP 4.7K 5% 1/10W METAL OXIDE 22 5% 1W METAL OXIDE 33 5% 1W CARBON 2.2 5% 1/4W FUSIBLE 0.1 10% 1/2W METAL CHIP 100 0.5% 1/10W METAL CHIP 10K 0.5% 1/10W METAL CHIP 220K 0.5% 1/10W METAL CHIP 220K 0.5% 1/10W METAL CHIP 220K 0.5% 1/10W METAL CHIP 180K 0.5% 1/10W METAL CHIP 150K 0.5% 1/10W METAL CHIP 4.7K 0.5% 1/10W METAL CHIP 12K 0.5% 1/10W METAL CHIP 10 0.5% 1/10W RES-CHIP 22 5% 1/10W RES-CHIP 22 5% 1/10W METAL CHIP 10K 5% 1/10W METAL CHIP 10K 5% 1/10W METAL OXIDE 0.1 5% 2W METAL CHIP 1K 0.5% 1/10W METAL CHIP 1M 5% 1/10W METAL CHIP 1K 5% 1/10W METAL CHIP 1K 5% 1/10W METAL CHIP 4.7K 5% 1/10W METAL CHIP 680 0.5% 1/10W METAL CHIP 5.6K 0.5% 1/10W

No. 1553 1554

Board G2 G2 G2 G2 G2 G2 G2 G2 G2 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3
Type RESISTOR RELAY RELAY TRANSFORMER TRANSFORMER TRANSFORMER THERMISTOR VARISTOR VARISTOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR
Ref. No. R6557 RY6003 RY6004 T6100 T6101 T6300 TH6300 VD6000 VD6001 C6002 C6004 C6005 C6006 C6102 C6103 C6104 C6106 C6107 C6108 C6109 C6110 C6113 C6114 C6115 C6116 C6117 C6118 C6119 C6120 C6121 C6122 C6123 C6124 C6125 C6126 C6127 C6128 C6129 C6130 C6131 C6132 C6133 C6134 C6135 C6136 C6137 C6139 C6140 C6141 C6300 C6301 C6304 C6305 C6306 C6307 C6308 C6309 C6312 C6313 C6314 C6316 C6317 C6318 C6320 C6321 C6400 C6401 C6403 C6404 C6420 C6421 C6422 C6423 C6424
Part No. 1-218-823-11 1-755-418-12 1-755-418-12 1-443-589-11 1-443-588-11 1-443-313-21 1-803-586-41 1-805-479-21 1-805-479-21 1-165-531-11 1-165-529-31 1-119-886-51 1-119-886-51 1-104-760-11 1-115-350-51 1-115-350-51 1-115-339-11 1-107-823-11 1-115-350-51 1-115-350-51 1-165-531-11 1-112-024-21 1-162-927-11 1-112-188-11 1-162-964-11 1-163-021-91 1-162-962-11 1-119-886-51 1-128-526-11 1-163-037-11 1-107-889-11 1-115-339-11 1-163-021-91 1-115-339-11 1-115-416-11 1-104-760-11 1-100-613-81 1-100-613-81 1-163-145-00 1-100-613-81 1-100-613-81 1-135-361-11 1-135-361-11 1-135-361-11 1-162-964-11 1-163-021-91 1-107-903-11 1-112-188-11 1-115-416-11 1-115-350-51 1-115-350-51 1-107-680-91 1-107-974-11 1-107-905-11 1-102-228-00 1-107-903-11 1-162-964-11 1-107-910-11 1-107-826-11 1-119-886-51 1-128-949-31 1-107-826-11 1-128-526-11 1-162-964-11 1-162-964-11 1-162-970-11 1-104-653-11 1-107-902-11 1-107-826-11 1-163-037-11 1-107-906-11 1-163-037-11 1-162-970-11 1-162-964-11

Description CERAMIC CHIP 0.01UF 10.00% 50V CERAMIC CHIP 0.01UF 10.00% 25V CERAMIC CHIP 0.001UF 10.00% 50V CERAMIC CHIP 0.01UF 10.00% 50V CERAMIC CHIP 0.01UF 10.00% 50V ELECT 4.7UF 20% 50V ELECT 47UF 20% 25V ELECT 4.7UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V ELECT 1UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V ELECT 100UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V CERAMIC CHIP 0.01UF 10.00% 25V CERAMIC CHIP 0.001UF 10.00% 50V CAP, METALIZED PET FILM 1.0MF CERAMIC CHIP 0.01UF 10.00% 25V ELECT 4.7UF 20% 50V ELECT 47UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V CERAMIC CHIP 0.001UF 2% 50V ELECT 10UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V FILM 0.22UF 5.00% 50V ELECT 47UF 20% 25V CERAMIC 220PF 5.00% 1KV CERAMIC 220PF 5.00% 1KV FILM 47000PF 3% 800V CERAMIC CHIP 0.01UF 10.00% 25V ELECT 1800UF 20% 25V ELECT 1800UF 20% 25V ELECT 1800UF 20% 25V CERAMIC CHIP 0.001UF 10.00% 50V CERAMIC CHIP 0.001UF 10.00% 50V CERAMIC CHIP 0.001UF 10.00% 50V CERAMIC CHIP 0.001UF 10.00% 50V CAP, METALIZED PET FILM 0.47MF CERAMIC CHIP 0.01UF 10.00% 25V ELECT 4.7UF 20% 50V ELECT 47UF 20% 50V CERAMIC CHIP 0.001UF 2% 50V ELECT 10UF 20% 50V CERAMIC CHIP 0.1UF 10.00% 50V CERAMIC CHIP 0.001UF 10.00% 50V FILM 0.22UF 5.00% 50V CERAMIC CHIP 0.01UF 10.00% 25V ELECT 47UF 20% 25V ELECT 100UF 20% 50V CERAMIC 220PF 5.00% 1KV CERAMIC 220PF 5.00% 1KV FILM 0.027UF 3% 1KV ELECT 47UF 20.00% 50V ELECT 10UF 20.00% 100V CERAMIC CHIP 0.047UF 10.00% 16V ELECT 1000UF 20% 35V ELECT 1500UF 20% 25V ELECT 2200UF 20% 16V ELECT 4.7UF 20% 100V CERAMIC CHIP 0.001UF 10.00% 50V PIN, CONNECTOR (PC BOARD) 3P PIN, CONNECTOR (PC BOARD) 14P PLUG, CONNECTOR 5P PIN, CONNECTOR (PC BOARD) 9P PIN, CONNECTOR (PWB) 8P DIODE MMDL914T1 DIODE RM11C DIODE MMDL914T1 DIODE DTZ-TT11-6.8B DIODE D15XB60 DIODE MMDL914T1 DIODE BAT54HT1 DIODE RM11C DIODE MM3Z7V5T1 DIODE BAT54HT1
Remarks-1 Remarks-2 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10 KLV-S40A10

No. 1981 1982

Board G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 G3
Type RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR VARIABLE RESISTOR RELAY RELAY TRANSFORMER TRANSFORMER TRANSFORMER TRANSFORMER TRANSFORMER TRANSFORMER VARISTOR VARISTOR
Ref. No. R6605 R6607 R6610 R6611 R6700 R6701 R6702 R6703 R6704 R6705 R6706 R6707 R6709 R6710 R6711 R6712 R6713 R6714 R6716 R6717 R6718 R6720 R6721 R6722 R6723 R6800 R6802 R6803 R6804 R6806 R6807 R6808 R6809 R6810 R6811 R6812 R6813 R6817 R6818 R6819 R6820 R6821 R6822 R6823 R6838 R6839 R6840 RV6100 RY6002 RY6004 T6100 T6101 T6300 T6700 TH6300 TH6420 VD6001 VD6002
Part No. 1-218-865-11 1-218-847-11 1-216-857-11 1-216-857-11 1-249-393-11 1-202-933-61 1-218-868-11 1-208-840-11 1-208-840-11 1-218-877-11 1-216-821-11 1-218-823-11 1-212-865-00 1-249-393-11 1-212-865-00 1-218-827-11 1-216-833-11 1-216-833-11 1-249-393-11 1-216-361-00 1-216-857-11 1-208-830-11 1-208-830-11 1-208-830-11 1-208-830-11 1-216-295-91 1-216-821-11 1-249-377-11 1-216-864-11 1-216-821-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-249-393-11 1-216-793-11 1-216-821-11 1-218-847-11 1-218-875-11 1-218-863-11 1-216-841-11 1-216-857-11 1-216-857-11 1-216-857-11 1-247-752-11 1-240-251-11 1-216-833-11 1-227-703-91 1-755-418-12 1-755-418-12 1-443-463-11 1-443-463-11 1-443-313-21 1-443-819-11 1-803-586-11 1-809-789-71 1-805-479-21 1-805-479-21
Description METAL CHIP 5.6K 0.5% 1/10W METAL CHIP 1K 0.5% 1/10W METAL CHIP 1M 5% 1/10W METAL CHIP 1M 5% 1/10W CARBON 10 5% 1/4W FUSIBLE 0.1 10% 1/2W METAL CHIP 7.5K 0.5% 1/10W METAL CHIP 270K 0.5% 1/10W METAL CHIP 270K 0.5% 1/10W METAL CHIP 18K 0.5% 1/10W METAL CHIP 1K 5% 1/10W METAL CHIP 100 0.5% 1/10W FUSIBLE 22 5% 1/4W CARBON 10 5% 1/4W FUSIBLE 22 5% 1/4W METAL CHIP 150 0.5% 1/10W METAL CHIP 10K 5% 1/10W METAL CHIP 10K 5% 1/10W CARBON 10 5% 1/4W METAL OXIDE 0.22 5% 2W METAL CHIP 1M 5% 1/10W METAL CHIP 100K 0.5% 1/10W METAL CHIP 100K 0.5% 1/10W METAL CHIP 100K 0.5% 1/10W METAL CHIP 100K 0.5% 1/10W SHORT CHIP 0 METAL CHIP 1K 5% 1/10W CARBON 0.47 5% 1/4W SHORT CHIP 0 METAL CHIP 1K 5% 1/10W SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 CARBON 10 5% 1/4W METAL CHIP 4.7 5% 1/10W METAL CHIP 1K 5% 1/10W METAL CHIP 1K 0.5% 1/10W METAL CHIP 15K 0.5% 1/10W METAL CHIP 4.7K 0.5% 1/10W METAL CHIP 47K 5% 1/10W METAL CHIP 1M 5% 1/10W METAL CHIP 1M 5% 1/10W METAL CHIP 1M 5% 1/10W CARBON 1K 5% 1/2W CEMENTED 6.8 5% 10W METAL CHIP 10K 5% 1/10W RES, CERMET VAR 1K RELAY (AC POWER) RELAY (AC POWER) CONVERTER TRANSFORMER (PIT) CONVERTER TRANSFORMER (PIT) TRANSFORMER, CONVERTER (SBT) CONVERTER TRANSFORMER (PIT) THERMISTOR, NTC THERMISTOR, POSITIVE VARISTOR VARISTOR

 

Tags

CY-PA4003U CMT-LX20I NV-DV10000 Color Vtech 6042 KDC-8021 - 2001 Yamaha 115 TE-2000 Emgeton C1 PX-110 NV-HS870 MS1944JL Yamaha MU80 5600GT X-540 PDP-508XD MM-ZB7 Kodak Z980 SLV-SE220D RP614V2 Online Addenda AW1051T IRC3580I PW80-2000 Class 270 OPH 1004 E3100 Coder 1 Miniportrait 403 Photo 890 Gpsmap60CX KE-W50a10E WIT 61 Review D-E666 WMR100A XJR1300-2004 TL-WN310G DCC 900 Samsung N220 KX-TW500GR EQ-500U ER8312B Experience Phase TWO BD-HP21 VL-Z7 EWT12420W - 1992 CK-1W RD2765 W705A MC115T96 Fondue SET FAX-B150 SL-PJ37 MI-sport V2 Porto CD34 GA-880GA-ud3H VE538 Factor PC WAS700 TA-VE910 SAT M2 KDL-40W5100 PLV-Z2 LVP-X390U S5 IS PMA-250SE RH1757 1098 S Servers K900FX SGH-A727 SP 500 HM251HI Nanosynth Nokia 7260 SPH-M800 CX16NF HT-THQ22 932GW Router Type 320 KX-P3626 CZ-21M203N 421 WS GR-B399PQA Controller 2 250 Chronographwithdate ICF-CD855V Fantasy 2000 Triax 10 VFW 332 Easyshare CD50 EAX1300 SC-VK62D V-U8070NBJ

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101