Trinitron

II I II I I I I II

Color TV

II I I I I I J I I I I I II I I I

I II ! II

Operating

Instructions

KV-13M20 KV-13M 30 KV-13M31
KV-14R20 KV-14R20C KV-14RD1
KV-20S20 KV-20S30 KV-2OV60 '.

KV-21SD1

1996 by Sony Corporation
TOp_event fire or shock hazard, do not expose the IV to rain or moisture.
11an_ liquid t)r _oJid object falls into the TV, unplug it and have it checked by qualified personnel before operating it further. Unplug the TV from the wall outlet if you are not going to use it for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself. For more safety information, see the IMPORTANT SAFEGUARDS leaflet packed with your TV. Protecting the W To prevent internal heat build-up, do not block the ventilation openings. Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. Note on Caption Vision This television receiver provides display of television closed captioning in accordance with 15.119 of the FCC rules. Note to CATV System Installer Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Use of this television for other than private viewing of programs broadcast on UHF or VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcaster/cable company and/or program owner.
_o usE_SE_VhCE_LE PARTSN_I_L L "Lf LF_ E_WICING S TO_AUFIEO_VlCEpE S nSON_LL
to alert the user to the J his _} _nbol is intended presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. intended to alert the This symbol is user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION When using TV games, computers, and similar products with your TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the screen for long periods of time at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. These types of imprints are not covered by your warranty because they are the result ot misuse. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority this equipment. to operate
Safety Precautions Operate the TV only on 120 V AC (Except KV-14R20C, 21R20C, 21RS20C, 21RS30C). Operate the TV only on 220 V AC (KV-14R20C, 21R20C, 21RS20C, 21RS30C only). One blade of the power plug is wider than the other for safety purposes and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Owner's Record Record the model and serial numbers located on the rear of the TV in the spaces below. Refer to them if you call your Sony dealer regarding this product. Model Number:

Serial Number:

3 m= system with your TV. Outdoor antennas or cable TV systems usually provide the best picture quality. o m Q. O
Connecting an Indoor, Outdoor or Cable Antenna
Connect your antenna antenna terminal. A

VHF only VHF/UHF

or cable to the TV's VHF/UHF

coaxial cable VHF/UHF

75-ohm
If you cannot connect your antenna or cable directly to the TV antenna terminal, follow one of the diagrams below. B

VHF only or UHF only or VHF/UHF Antenna (see Specifications connector on page 16 far models) 30g-ohm twin lead cable

coaxial

"'

VHF/UHF)

_ 300-ohm

_ twin lead cable

(not supplied)
Connecting to a Cable TV System Through a Cable Box

]111111

If your cable system requires connection as shown below.
use of a cable box, make the

Cable box e

Connecting
See your VCR instructions to set up the VCR. After connecting the VCR to the TV, you will be able to do the following: s Watch video tapes a Record one TV program while viewing another
Check the model number of your TV and select the appropriate connection diagram.
Notes If your cable system requires use of a Cable Box, install it between the antenna cable and the VCR. For a monaural VCR, connect the audio output of the VCR to AUDIO L (MONO) on the TV. Connect your S-Video cable (KV-20V60 only) to the S-VIDEO input on the TV. S-Video will override your standard video input, providing the most stable picture. S-Video does not provide audio output.

Ji!"

!ilia'

Antenna Cable

. , L(_

,,,,k n.a Cable _

VHFI1JHF OUT

S-V_DEO

s-vmeo v,e_o,IN I@@@l
_ AUDIO (black) t--'_ _ V _/ "( AUDIO-R (red) AUDIO-L (white)
AUD_O-R AUDIO-L VIDEO t t
AUDIO (black) _ VV V 1 (not supplied) | AUDIO-R (red) / l AUDIO-L (white) VIDEO (yellow) _ VIDEO (yellow)
AUD}O-R AUD_O-L WDEO (Rear of'rv) J
VIDEO (ye''ow) Video Cable VIDEO (yellow)
Formodels with menD inputs
Video Cable (not supplied) |
For models with stereo inputs

a Camcorder

KV-13M30, 13M31, 20530, 20V60, 21RS30C only Use this connection to view a video tape from a camcorder.

VIDEO 2 INPUT

ToOtpute

<ye,,ow)J k l

J_ VIDEO _
AUDIO R (red) AUDIO L (white)
"K C bleC.oyu.p, Ied) j

Notes , For a monaural camcorder, connect the audio output of the camcorder to AUDIO L (MONO) on the TV. If you are connecting your camcorder to a monaural TV (KV-13M30, 13M31 only), plug the audio connector into the AUDIO input on the TV. You can also connect a camcorder to inputs on the rear of the TV (all models).

an Audio System

KV-20S30, 20V60, 21RS30C only To listen to TV audio through a separate stereo system, connect the TV as shown below. See page 11 to switch to the external speakers.
VIDEO 1 IN 0-AUDIO-L{MDNO) VIDEO R (red)

I AUDIO OUT I

AUDIO IN L

System

OUT L (white) Audio Cable (not supplied) (white) L__.___.J
ll_structions in this manual alt, bas__,d usill_ the lcmotc on control. You can also use the controls on the TV.
The menu illustrations are from KV-20M20. When features found on other models are discussed, the manual lists the models covered by that specific set of menus.
Note The menu disappears 90 seconds after you press a button, or immediately after you press MENU. Refer to separate instructions for remote control pre-programming (KV-20V60 only).

Inserting

Batteries
Insert two size AA (R6) batteries (supplied) by matching the + and - on the batteries to the + and - inside the battery compartment. With normal use, the batteries should last for approximately six months. Model shown is RM-Y116. RM-Y117 uses one battery.
Notes Remove the batteries to avoid possible damage from battery leakage if you will not be using the remote control for an extended period of time. Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or where the humidity is high.
Changing the Menu Language
Except Canadian models If you want to view the menus in Spanish, menu language. 1 Press MENU. MENU The Main menu appears. you can change the

_ITEXT IpENd_ ISH : COl

Press _+ or V- to move the cursor (1_) to ENGLISH and press RETURN. ENGLISH turn red. will
Press A+ or V- to select ESPANOL and press RETURN. ESPAIqOL will turn green.

4 Press MENU to return

t""$_ R) (
VIDEO AJUSTES _/TET: _ESPANOL

to the TV program.

Note Some parts of the Spanish menus will appear in English.

Setting

Cable IV On or Off
If you have connected the TV to a cable TV system, set CABLE to ON. If not, set CABLE to OFF. 1 Press MENU. 2 3
Move the cursor to SET UP and press RETURN. to CABLE and (_ET UP /'CABLE:

I | | I I

Move the cursor press RETURN.
AUTO PROGRAM CHANNEL ERASEIAOO CHANNEL BLOCK CHANNEL GUIDE _MENU
Press A+ or V- to select ON or OFF. Press RETURN. Press MENU to return to the TV program.

GET UP ,CABLE: OFF AUTO PROGRAM CHANNEL ERABE/AOC CHANNEL BLOCK CHANNEL GUIDE DMENU
If the screen is black, the TV is set to a video input and you cannot select CABLE. Press TV/VIDEO until a channel number appears, then follow steps 1-6.

Auto Programming

Your Channels

III I II I I

TV channels can be preset easily. First, you can store all the receivable channels automatically. Later, you can erase unwanted channels or add additional channels.
Notes If the TV is set to VIDEO, you cannot run AUTO PROGRAM. Press TV/VIDEO on the remote control until a channel number appears. It is usually best to preset channels during the day when the greater number of channels are broadcasting. Press MENU. MENU The Main menu appears.
, IOEO SET UP Fc_]ITEXT: C[I ENGLISH Use _I _ Exit_

(R) _._( L)_ I

Press A+ or V- on the remote control to move the cursor (1_)to SET UR Press RETURN. The SET UP menu appears.

'SET UP ,CABLE:

AUTO PROGRAM CHANNEL BLOCK CHANNEL GUIDE CHANNEL ERASEIADD _MENU
Press A+ or V- to move the cursor to AUTO PROGRAM and press RETURN. AUTO PROGRAM appears on the screen and the TV starts scanning and presetting channels. When all of the receivable channels are stored, AUTO PROGRAM disappears.
Note AUTO PROGRAM will tune in all of the channels in your area, including some with weak or scrambled signals. They will appear fuzzy on the screen. You can erase them using CHANNEL ERASE/ADD, Pressing any button on the remote control while AUTO PROGRAM is scanning and presetting channels will cause AUTO PROGRAM to stop.

Erasing

or Adding

Channels

After you run AUTO I_I{OGRAM, you call erase unnecessary channels or add new ones.
3 Press MENU. Press _+ or V- to select SET UP and press RETURN. Press _+ or V- to select and press RETURN. CHANNEL ERASE/ADD

_._( f_'x_n) L)_ [

/SET UP bCHANNEL ERASE/ADO
CHANNEL GUIDE _MENU CHANNEL ON BLOCK CABLE : Llsev_I _j_] Exit_ Channel to be erased AUTO PROGRAM
TO erase or add a channel: (1) (2) Press CH +/-or 0-9 to select the channel you want to erase or add. Press A+ or V- to select ERASE or ADD.

""1

Use (0-9) or (CH+I-) [ to select the chattel[

(3) Press RETURN.

use'_ _ A+ F

Exit J _

If you are erasing a channel, the "-" symbol appears next to the channel number. If you are adding a channel, the '%" symbol appears next to the channel number. To erase or add other channels, repeat step 4. Press MENU to return to the TV program.

the cable TV channel with the
Note If you erase or add a VHF or UHF channel, same number is also erased or added.

5"

Press POWER

Note If VIDEO appears.

to turn

TV on.

appears

on the screen,

II31:L) st) th,d a _hamlcl

numbc_

Selecting

a Channel Directly

a channel.

Press 0-9 to select

The channel will change after 2 seconds, or you can press ENTER for immediate selection.

JIJJILLUI[ [ J[[Jl [

Scanning Through Channels
Press CH +/- until the channel want appears. you CH

Jumping Quickly Between

Press JUMR The TV switches from the current channel switches

Two Channels

JUMP (-4"1 -) that back
channel to the previous you watched. Pressing Note JUMP again

to the first channel.

You can only jump to channels the last channel you scanned.

you have selected

with the 0-9 keys, or ba_ k to

Adjusting

the Volume
Press VOL +/- to adjust the volume.

UOLUME llllIllllll..

Muting

the Sound

MUTING on the screen. ('_
Press MUTING. MUTING To restore MUTING appears
the sound, press again, or press VOL +.

Displaying

Un-Scr_:_:n

Intormdtlon

Use the DISPLAY key to check the TV's Display settings. 1 Press DISPLAY. DISPLAY The channel number will be displayed. The TV will also display the MTS mode if SAP, MAIN, or MONO are selected (KV-20S20, 20S21, 20S30, 20V60, 21RS20, 21RS20C, 21RS30C, 21SD1 only). The MTS mode display disappears after 4 seconds.

XDS ON will appear

on the screen. If XDS

_ _o_ w_ r,_ _. s_

(Extended Data Service) is broadcasting, information will then appear on the screen (except KV-13M20, 14PM1, 14R20, 14R20C, 14RD1) 3 Press DISPLAY again.
CC1 ON (if selected) will appear on the screen for a few seconds. Captions will then appear at the top or bottom of the screen. To turn off Caption Vision or XDS display, press DISPLAY again until DISPLAY OFF appears.

about Caption Vision.

Note See page 13 for more information

Watching Video Tapes

Press TV/VIDEO until the correct video input appears.

TV/VIDEO

Press PLAY on your VCR to view Press TV/VIDEO to return

the video

the Sleep Timer

[I IlII

The sleep timer allows shut off automatically. 1
tile TV to stay on for a length

of time and then

Press SLEEPuntil the time you want appears. Each time you press SLEEP, the display moves between 30, 60, 90, and OFF. SLEEP appears one minute before the TV shuts off. To cancel the sleep timer, press SLEEPagain until SLEEPOFF appears, or turn off the TV.

(_ SLEEP

[ SLEEP 30

the Video Settings

hue, color, brightness, and sharpness of any
You can adjust tile picture, TV image. 1 Press MENU. 2
UIOEO l I,, PICTURE 111111111111,,,I HUE. I,,,,,,,,/ COLOR IIIIIII I. BR II_qTNESS ll111II I. 5t-_SS IIIIIIl,,,-,,, i :)MENU |
Move the cursor (1_)to VIDEO and press RETURN.

u_',I _

E_t _J I
feature that you want to adjust _'_m) PICTUREIHILIIIIIII.,, COLOR JiIIIIl,-,,,and press RETURN. _:_ _ HUE. I. See the Adjustable Items chart for a _,.T.J(L_\_ _-BRII_-iTNESSIIIIlll _SS IIIIIII. ,,. Press A+ or V- to select the make. lUIOE0 list of the adjustments you can _ DMENU V

Use _. _] Exit F_----I

A< I'0
Press _+ or V- to adjust the setting of the selected feature and press RETURN. The new setting appears VIDEO menu. in the
BR l GHTNESS lllllllllllllIlllllllll..
To adjust other video settings, repeat steps 3 and 4. Press MENU to return to the TV program.

ADJUSTABLEITEMS

iiii i i i ii ii. , i i ii tt it ,, i i
Item PICTURE HUE COLOR BRIGHTNESS SHARPNESS
Press A+ (R) to Increase the contrast Increase the green tones Increase color intensity Brighten Sharpen the picture the picture
Press _7-(L)to Decrease the contrast

Decrease Decrease Darken

the green tones color intensity the picture

Soften the picture

Restoring the factory video settings 1 To restore the factory video settings, press RESET while the VIDEO menu is displayed. All the settings except PICTURE are restored to factory settings.

ii!iii:iii ii ,::

Stereo or Bilingual

Programs (MlS)

II _z.. _lRlII
KV-20520, 20S21, 20S30, 20V60, 21PS1, 21R520, 21R520C 21R530C, 21SD1 only. Menus shown are for KV-20S20. The Multichannel TV Sound (MTS) feature allows you to enjoy stereo sound (MAIN), Second Audio Programs (SAP), or monaural sound (MONO) when available. 1 Press MENU. Move the cursor to AUDIO and press RETURN. Move the cursor to MTS and press RETURN. Press A+ or _7- to select MAIN, SAP, or MONO. Press MENU to return to the TV program. (_t(R) _ _'_ _TJ(

AUDIO P MTS: MAIN

_MENU Llse v _ _] Exit _]

Choose MAIN SAP MONO

Note The sound
To Listen to stereo sound. Listen to bilingual Reduce

of non-SAP

and other programs. poor stereo broadcasts.

when SAP is selected.

noise during

programs

may be muted
the Speaker Switch (SPEAKER)
KV-2OS30, 201/'60,21R530C only. You can listen to the TV sound through your TV and a separate stereo sytem, or switch off the TV speakers to listen to TV sound only through the stereo. 1

Press MENU.

Move the cursor to AUDIO and press RETURN.

MTS: MAIN

Move the cursor to SPEAKER and press RETURN.
If you select will appear. Out Speaker Press A+ or
OFF, VARIABLE and FIXED See step 5 of "Changing Audio Volume". V- to select ON or OFF.

AUD I0

Press MENU to return to the TV program.

Choose ON

To Listen to the sound from the TV, or through separate stereo system. through external audio system speakers the TV and a

ont'y.

Changing Audio Out Speaker Volume
KV-20530, 201/50, 21RS30C only. You can control the volume of the TV program when you play the TV sound through a separate stereo system. 1 Press MENU. 2 Move the cursor to AUDIO and press RETURN. Move the cursor to SPEAKER and press RETURN. Press A+ or _7- to set SPEAKER to OFF and press RETURN. 11
Move the cursor to FIXED or VARIABLE and press RETURN. 6 Your selection will turn yellow. Press MENU to return to the TV program. To Adjust the volume Adjust the volume with your stereo. through the TV.

AUOIO bUARIABLE FIXED

use_l_

Exit_]

Choose FIXED VARIABLE
Set the volume on your stereo low when switching avoid overloading your external speakers.

front VAR to FIXED to

Turning on Surround
KV-ZOV60 only Use this feature to listen to TV audio 3 4

in Surround

Sound mode.
Move the cursor (1_)to AUDIO and press RETURN. Move the cursor to SURROUND and AUDIO TREBLE I1111/I. press RETURN. BASS I111111. BALANCE '"'"1. Press A+ or _7- to set Surround MTS: MAIN _SURROUND: OFF ON or OFF. SPEAKER: ON Press MENU to return to the TV program.

D MENU Use_{_Exit_

Treble, Bass, and Balance
KV-2OV60 only 1 Press MENU. Move the cursor (1_) to AUDIO and press RETURN. Move the cursor to TREBLE, BASS, or BALANCE and press RETURN.
AUB i0 _, TREBLE BASS BALANCE MTS: MAIN SURROUND: SPEAKER: D MENU Use _ _ {_Z_
illil[I. II/llll. ,",,'l,,"',,' OFF ON Exit_

Choose

TREBLE BASS BALANCE 6

Increase Increase Change

or decrease or decrease the balance
high pitched low pitched between

sounds. sounds.

speakers.
Press Z_+or _7- to increase or decrease the setting. Press RETURN to make other audio adjustments. Press MENU to return to the TV program.
Restoring the Factory Audio Settings 1 To restore the factory audio settings, press RESET while the AUDIO menu is displayed.
Blocking Out a Channel (CHANNEL BLOCK)
This feature allows channels.

3 Press MENU. Move Move

you to prevent

children

from watching

selected

the cursor to SET UP and press RETURN. the cursor to CHANNEL BLOCK and press RETURN.

IVbove the uuJ>o_

to I or 2 a;id press

RETURN.

CHANNEL BLOCK I. CH___ 2. CH___ DMENU
Press A+ or q- to select the channel that you want to block. Press RETURN. Repeat steps 4 and 5 to enter the second channel that you want to block. Press MENU to return to the TV program.
CHANNEL BLOCK ,I. CH I0 2. CH___ _MENU Select Usevi_ the channel. Exit_
If you switch to the blocked channel, BLOCKED screen is black and the sound is muted. To cancel a CHANNEL BLOCK setting Follow steps 1-4 above. Press RESET.

appears.

a Caption Vision Option

Caption Vision options include CC1, 2, 3, and 4, or TEXT1, 2, 3, and 4. CC1, 2, 3, and 4 show a caption or printed version of the dialog or sound effects of a program. CC1 will be the setting for most programs. TEXT1, 2, 3, and 4 show text information on half of the screen. This text is not usually related to the program. 1 Press MENU.
Press z_+ or _select [CC/TEXT: press RETURN. to CC1] and
uI_0 SET UP b Fff_ ITET: CCl ENBLISH Usev l _ Exit_
Press A+ or _7- to select the caption type (CC1, 2, 3, 4, or TEXT1, 2, 3, or 4) and press RETURN. Press MENU to return to the TV program. To view Caption Vision, press DISPLAY several times until CC1, 2, 3, 4, or TEXT1, 2, 3, 4 ON is displayed, if broadcasting. The caption will appear in a few seconds. To turn off Caption Vision, press DISPLAY until DISPLAY OFF appears.
Notes Captions disappear for a few seconds when you press the MUTING button. Captions may appear with a white box or other errors if you have poor reception of the channel.

Customizing

(CHANNEL
the Channel Number Buttons

GUIDE)

You can assign up to 12 of your favorite channels to CHANNEL GUIDE locations and switch to them with the CHANNEL GUIDE.
3 Press MENU. Press Z_+ or V- to select Press A+ or V- to select SET UP and CHANNEL press RETURN, GUIDE and press RETURN.
o Pre_ i_i- IURN again to move the cursor to the number pad.

CHANNEL GUIDE I

Q @ @ ,--I (9 _MENUl @ I
Press _+ or V- to select a number on the CHANNEL GUIDE (the button number will turn red) and press RETURN. The turns red.

"CHQNNEL

@ @@

,'--- I _MENU I I

Buttons 0-9, DISPLAY (D) and ENTER (E) are available for CHANNEL GUIDE access. 6 Press A+ or V- to select the channel that you want to assign to that button, and press RETURN. The TV will switch to that channel.

_CHANNEL GUIDE l

@@@_la

_MENU l

u_e[_ _

I Exit iN)]J _

Repeat steps 5-7 to set other channels. Press MENU to return to the current TV program.
To remove a CHANNEL GUIDE setting 1 Repeat steps 1-6 to select the channel that you want to remove. 2 Press RESET.

Using the CHANNEL GUIDE

I I I II I II I
Press CH GUIDE. The CHANNEL button numbers assigned to them. GU1DE shows and the channels

CHANNEL

Os @14 -----

1o -------

13 -------
Press 0-9, DISPLAY or ENTER on the remote control to switch to the channel you want to view. without selecting
To cancel the CHANNEL GUIDE display a channel, press CH GUIDE again.
Listening with Headphones

or an Earphone

Plug the headphones or earphone into the jack on the front of the TV. Using headphones will turn off the sound to the TV speakers.

Notes To prevent hearing damage due to sudden or prolonged excessive volume, do not set the volume too high while listening. If your TV is monaural, the monaural sound will be heard from both headphones,

5; ILL

It yt_u ,uc h,_ m_ ,_ plobiem witJl ) t)_tJ 1 , try the _u_:_tion_ below. If the problem persists, contact your nearest Sony dealer.
Problem No picture, no sound
Suggestion Make sure the power cord is connected. Check the TV/VIDEO setting: when watching TV, set to TV; when watching video tapes, set to VIDEO (page 9). Try another channel. It could be station trouble. Adjust PICTURE in the VIDEO menu (page 10). Adjust BRIGHTNESS in the VIDEO menu (page 10). Check the antenna and/or cable connections (page 3).
Poor or no picture, good sound

Good picture, no sound

Press MUTING so that MUTING disappears from the screen (page 8). Check that MTS is set to MAIN or MONO (page 11 ). Make sure SPEAKER is set to ON in the AUDIO men u (page only). 11 ). (KV-20S30, 20V60, 21RS30C

No color

Adjust COLOR in the VIDEO menu (page Make sure that a black and white program not being broadcast.

10). is

Only snow appears on the screen
Check the CABLE setting in the SET UP menu (page 6). Check the antenna and/or cable connections (page 3). Make sure the channel is currently broadcasting. Adjust the antenna. Move the TV away from sources of electrical noise such as computers, microwaves, and hair-dryers. Use a highly directional outdoor antenna or a cable. This problem is often caused by reflections from nearby mountains or tall buildings. Make sure CABLE is OFF in the SET UP menu (page 6). Use AUTO PROGRAM to add channels that are not presently in the memory (page 6). Make sure CABLE

Dotted lines or stripes

Double images or ghosts
Cannot receive higher number channels (UHF) when using an antenna Cable stations don't seem to work

is ON in the SET UP menu

(page 6). Use AUTO PROGRAM to add channels that are not presently in the memory (page 6). Batteries could be _,veak. Replace them (page 5). Make sure the TV's power cord is securely connected to a wall outlet. Move the T 3-4 feet away from fluorescent lights.
Remote control does not operate

The TV needs

Clean the TV with a soft dry cloth.Never use strong solvents such as thinner or benzine, w\x'lch nxig_ 4_wxage '_he t_.w_shof _\-_e_binet,
For all models (except as notedj Television system Channel coverage Antenna
Picture Power tube requirements
American IV st,. _dard VHF: 2-13/UHF: 14-69/CA1 _,: t-_25 75-ohm external antenna terminal k_r VHF/UHF

Trinitron tube 21R20C,

120 V, 60 Hz 220 V, 50/60 Hz (KV-14R20C, 21RS20C, 21RS30C only)

Supplied

accessories
Size AA (R6) batteries (2) Antenna connector (except KV-20M20, 20b20, 20S21, 20S30, 20V60) Remote control RM-Y116 (1) Remote control RM-Y117 (1) (KV-20V60 only) Antenna dipole (except KV-20M20, 20S20, 20S21, 20S30, 20V60) Antenna dipole 20S30, 20V60) 13M31, 14PMI, (KV-20M20, 20S20, 20S21,

Optional

accessory 13M30,
KV-f3M20, Screen size Inputs

14R20, 14R20C, 14RD1

13 in., 14 in. 1 video, 1 audio (KV-13M20, 14PM1, 14R20, 14R20C, 14RD1 only) 2 video, 2 audio (KV-13M30, 13M31 only)

Speaker Power

output consumption
2W 75 W when in use 6 W in standby 8 W in standby (KV-14R20C only) 358 x 342 x 401 mm (14 1/8 x 131/2 x 15 3/4 in.) 10 kg (22 Ibs)
Dimensions (W/H/D) Mass KV-2OM20, Screen size Inputs Speaker Power output consumption 21PMI,
21R20, 21R20C, 20 in., 21 in. I video, 2W 1 audio
90 W when in use 6 W in standby 8 W in standby (KV-21R20C only) 522 x 477 x 471.7 mm (20 I/2 x 18 3/4 x 18 1/2 in.) 21.3 kg (46 lbs, 13 oz)

Dimensions (W/H/D) Mass

KV-2OS20, 20521, 20530, 201160,21P51, 21R$20, 21R520C, 21R530C 215D1
Screen size Inputs/outputs 20 in., 21 in. i video, I audio (KV-20S20, 20S2t, 21PS1, 21RS20, 21RS20C, 21SD1 only) 2 video, 2 audio (KV-20S30, 21RS30C only) S-Video (KV-20V60 only) Variable Audio Out (KV-20S30, 20V60, 21RS30C only) 2W+2W 90 W when in use 7 W in standby 8 W in standby (KV-21RS20C, 522 ((21 x 477 x 471.7 1/2 x 18 3/4 x x 464 x 468.8 5/8 x 18 1/4 x

Speaker

output

Power consumption

21RS30C only)

Dimensions (W/H/D)

mm (except KV-20V60) 181/2 in.) (except KV-20V60) mm (KV-20V60 only) 18 1/2 in.) (KV-20V60 only)
Mass Design and specifications Sony Corporation
21.4 kg (47 lbs) (except KV-20V60) 23.4 kg (51 Ibs, 8 oz) (KV-20V60 only) are subject to change without notice.

Printed in U.S.A.