Sony LBT-XG500 Manual
Sony LBT-XG500, size: 280 KB
Sony LBT-XG500 Annexe 1
Here you can find all about Sony LBT-XG500 like manual and other informations. For example: review.
Sony LBT-XG500 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony LBT-XG500 please write about it to help other people. [ Report abuse or wrong photo | Share your Sony LBT-XG500 photo ]
User reviews and opinions
|jperez||6:47am on Thursday, October 21st, 2010|
|Annoying intermittent thump Bought this to replace my Bose noise cancelling headphones whose headband broke. Sounds like a whisper at full volume I recently drove myself, after a lot of careful consideration.|
|explosive||10:24am on Tuesday, October 19th, 2010|
|None Comfortable,Compact,Durable,Good Value,Great Sound,Lightweight Cord Too Short,Too Much Ambient Noise Great use when in an airplane. Cuts out engine noise and babies crying Easy To Set Up,Easy To Use,Fast,Powerful|
|ksclarke||11:30pm on Tuesday, September 7th, 2010|
|This is wonderful, especially in airplanes. I noticed a few other passengers using the same. Comfortable,Compact,Durable,Good Value,Great Sound.|
|Corhnoliosanchez||1:54pm on Friday, June 11th, 2010|
|Worth every penny. Bought these for a long haul flight to Australia. Cancelled out engine and cabin noise brilliantly. Good sound quality.|
|pedrugo||5:11am on Thursday, May 27th, 2010|
|over-priced Not much better - if at all - than the MDR NC60, which is now much less than half the price. Good but at a price I fly long haul quite regularly and felt the price was worth the investment considering what you pay for a business class ticket t... Sony MDR- NC500 does exactly what it says on the can I purchased the NC500 as a replacement for the Sony NC6 that I purchased back in 2004.|
|pfulford||9:43pm on Tuesday, April 20th, 2010|
|Consumer Reports Was Wrong On This One I am a big believer in Consumer Reports. Not so great on an airplane Just like others have written, I experienced a "pressure wave" when using these on an airplane.|
|zorci||8:08pm on Friday, April 2nd, 2010|
|I read the reviews here before I bought them ... I deeply regret selling my Bose QuietComfort ... None. Totally disappointing experience.|
|johann_p||1:39am on Tuesday, March 16th, 2010|
|I use this product with my i-pod and with my computer. Comfortable","Compact","Compact size","Durable","Fits good","Good Bass","Good for travel". The Sony MDR-NC500D Digital Noise Cancelling Headphones and one of the best set of noise cancelling headphone I have experienced.|
|mcleanross||8:52am on Wednesday, March 10th, 2010|
|These are just great I had used a friends Bose noise canceling headphones on a plane one time and wanted a pair to use when i travel or just want to get away.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Compact Hi-Fi Stereo System
Operating Instructions Owners Record
The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
LBT-XG700 LBT-XG500 LBT-XG80 LBT-XG60
2001 Sony Corporation
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. To prevent fire, do not Cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And dont place lighted candles on the apparatus. To prevent fire or shock hazard, do not place vases on the apparatus. Dont throw a battery, dispose it as the injurious wastes.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
NOTICE FOR THE CUSTOMERS IN THE U.S.A. NOTICE FOR THE CUSTOMERS IN CANADA CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the customers in North America
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ENERGY STAR is a U.S.
registered mark. As an ENERGY STAR partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This stereo system is equipped with the Dolby B-type noise reduction system*. * Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY and the double-D symbol ; are trademarks of Dolby Laboratories Licensing Corporation.
The use of optical instruments with this product will increase eye hazard.
Table of Contents
Main unit.. 4 Remote control.. 5
Adjusting the sound.. 18 Selecting the audio emphasis effect. 18 Selecting the surround effect.. 18 Making a personal audio emphasis file Personal File.. 19
Hooking up the system. 6 Inserting two size AA (R6) batteries into the remote.. 8 Setting the time.. 8 Saving the power in standby mode. 8
Changing the spectrum analyzer display.. 20 Singing along: Karaoke.. 20 Playing a guitar. 21 Enhancing video game sound Game Sync. 21 Falling asleep to music Sleep Timer.. 21 Waking up to music Daily Timer.. 22
ws wa w; ql qk qj qh qg qf q; qa qs qd
AMS./>, PRESET+/ 5 (9,13,14,15) CD N wa (9) CHECK 8 (10) CLEAR 7 (10) DECK A N ql (15) DECK B N qk (15) DISC SKIP 1 (9,10,17) FILE SELECT ON/OFF qf (18) FILE SELECT F/f qg (11) FLASH qs (11) FUNCTION qa (7,9,10,16,17,23,24) LOOP qh (11) MD N qj MD X 0 MD x 9 SLEEP 2 (21) TUNER/BAND w;(12,16) VOL +/ qd (9,13)
@/x4 m/M 6 X ws
Hooking up the system
Do the following procedure 1 to 4 to hook up your system using the supplied cords and accessories.
FM antenna Right speaker AM loop antenna Left speaker
1 Connect the speakers.
2 Connect the FM/AM antennas.
Connect the speaker cords to the SPEAKER jacks as below.
Insert only the stripped portion.
Set up the AM loop antenna, then connect it.
Red/Solid (3) Black/Stripe (#)
Jack type A Extend the FM lead antenna horizontally. AM loop antenna
Keep the speaker cords away from the antennas to prevent noise.
Jack type B Extend the FM lead antenna horizontally. AM loop antenna
CO A FM XIAL 75
3 For models with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage.
120V 220V 230~240V
Notice for customers in the United Kingdom
The AC power cord has been fixed temporarily on the rear panel with the plug band for shipment. Unlock the plug band to remove the plug.
4 Connect the power cord to a wall outlet.
The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with the adaptor).
When carrying this system
Do the following to protect the CD mechanism.
1 Make sure that all discs are removed from
2 Press FUNCTION repeatedly until CD
3 Hold down LOOP and then press ?/1 until
4 Unplug the AC power cord.
Before connecting the Front speaker
Stick the supplied front speaker pads to the bottom of the front speakers to stabilize the speakers and prevent them from slipping.
Inserting two size AA (R6) batteries into the remote
Saving the power in standby mode
Press POWER SAVE/DEMO (STANDBY) when the power is off. Every time you press the button, the system switches as follows:
Power Saving Mode y Demonstration The system is turned on/off by pressing ?/1.
When the remote no longer operates the system, replace both batteries with new ones.
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
?/1 indicator lights up even in the Power Saving Mode. The timer works in the Power Saving Mode. Everytime you press DISPLAY when the power is off, the display changes as follows: Demonstration y Clock
You cannot set the time in the Power Saving Mode.
Setting the time
1 Turn on the system. 2 Press c/CLOCK SET.
When you set the time for the first time, skip to the step 5.
To cancel the Power Saving Mode
Press POWER SAVE/DEMO (STANDBY) to show the demonstration.
3 Press v/V repeatedly to select SET
4 Press ENTER/NEXT. 5 Press v/V repeatedly to set the hour. 6 Press ENTER/NEXT.
The minute indication flashes.
7 Press v/V repeatedly to set the minute. 8 Press ENTER/NEXT.
The clock starts working.
If youve made a mistake or want to change the time, start over from step 1.
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.
CD Other Operations
Loading the CD
1 Press PUSH OPEN.
The front cover opens.
Stop playback Pause
Press x. Press HX (or X on the remote). Press again to resume play. During play or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go backward) (or press AMS.( to go forward) or AMS> (to go backward) on the remote). Press and hold M or m during playback, and release at the desired point. Press DISC 1~5 or DISC SKIP (or DISC SKIP on the remote). Press DISC 1~5 or HX (or CD N on the remote) (Automatic Source Selection). Press REPEAT during playback until REPEAT or REPEAT1 appears. REPEAT: For all the tracks on the CD. REPEAT1: For a single track only. To cancel playing repeatedly, press REPEAT until REPEAT or REPEAT1 disappears. Press PUSH OPEN. Turn VOLUME (or press VOL +/ on the remote).
2 Place a CD with the label side up on the
When you play a CD single, place it on the inner circle of the tray.
Select a track
To insert additional discs, press DISC SKIP to rotate the disc tray.
Find a point in a track
3 Close the front cover.
Select a CD
Playing the CD
Normal Play/Shuffle Play/Repeat Play
This unit lets you play the CD in different play modes.
Disc number in the playing position Track number Elapsed time
Switch to CD function from another source
Play repeatedly (Repeat Play)
DOLBY NR OFF
1 Press FUNCTION repeatedly until CD
Remove the CD Adjust the volume
2 Press PLAY MODE repeatedly until the
mode you want appears.
Select To play
ALL DISCS 1 DISC ALL DISCS SHUFFLE 1 DISC SHUFFLE PROGRAM
All CDs in the disc tray continuously. The CD you selected in the original order. The tracks on all CDs in random order. The tracks on the CD you selected in random order. The tracks on all CDs in the order you want them to be played (see Programming the CD tracks on page 10).
You can change the CD in the loading position during playback of the CD in the playing position.
3 Press HX (or CD N on the remote).
Playing CDs without interruption
You can play CDs without pausing between tracks.
Cancel Program Play
PLAY MODE repeatedly until PROGRAM, ALL DISCS SHUFFLE or 1 DISC SHUFFLE disappears. CHECK on the remote repeatedly. After the last track, CHECK END appears. CLEAR on the remote in stop mode. CHECK on the remote repeatedly until the number of the track to be erased lights up, then press CLEAR. 1 Press DISC SKIP to select a CD. 2 Turn the jog dial to select a track. 3 Press PLAY MODE. x once in stop mode or twice while playing.
Check the program
appears, then load a CD.
2 Press NON STOP so that the indicator
on this button lights up.
Clear a track from the end Clear a specific track in stop mode
3 Press HX.
To cancel Non-Stop Play
Press NON STOP so that the indicator on this button goes off.
Add a track to the program in stop mode
Programming the CD tracks
You can make a program of up to 32 tracks from all the CDs in the order you want them to be played.
Clear the entire program
4 Press TUNER MEMORY.
The next available preset number flashes in the display. The stations are stored from preset number 1.
5 Press ENTER.
COMPLETE appears and the station is stored.
6 Repeat steps 1 to 5 to store other
stations. To tune in a station with a weak signal
The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.
Press TUNING MODE repeatedly until MANUAL appears in step 2, then press +/ to tune in the station.
Listening to the radio
Preset radio stations in the tuner's memory first (see Presetting radio stations on page 12).
Using the Radio Data System (RDS)
(For European model only) What is the Radio Data System?
Each time you press this button, the tuning mode changes cyclically as follows: MANUAL t AUTO t PRESET
Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display and location of stations by program type. RDS is available only on FM stations*.
3 Press +/ (or PRESET +/ on the
remote) to tune in the preset station you want.
Preset number* Frequency
RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they all provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
* When only one station is preset, ONE PRESET appears.
Receiving RDS broadcasts
Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears.
To check the RDS information
Turn off the radio Adjust the volume
Press ?/1. Turn VOLUME (or press VOL +/ on the remote).
Each time you press DISPLAY, the display changes cyclically as follows: Station name* t Frequency t Program type* t Clock display t Effect status
* If the RDS broadcast is not received, the station name and program type may not appear in the display.
To listen to non-preset radio stations
Press TUNING MODE repeatedly in step 2 until MANUAL appears, then press +/ to tune in the desired station.
When an FM program is noisy, press STEREO/MONO so that MONO appears. There will be no stereo effect, but the reception will improve. To improve broadcast reception, reorient the antennas.
Using the Radio Data System (RDS) (continued)
Locating a station by program type (PTY)
You can locate a station you want by selecting a program type. The tuner tunes in the type of programs currently being broadcast from the RDS stations stored in the tuners preset memory. The types of programs include NEWS, AFFAIRS (current news), INFORMATION, SPORT, EDUCATION (education programs), DRAMA, CULTURE, SCIENCE, VARIED (interviews, games and comedy), POP, ROCK , EASY MUSIC (Easy listening), L.CLASSICAL (Classical music, such as instrumental, vocal, and choral works), S.CLASSICAL, OTHER MUSIC (music, such as rhythm and blues and reggae), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY (country music), NATION (nation's popular music), OLDIES, FOLK, DOCUMENTARY (investigative features), ALARM TEST (test signal for emergency broadcast), ALARM-ALARM (emergency broadcast), and NONE (any programs not defined above).
1 Press PTY while listening to the radio. 2 Press +/ to select the program type
SEARCH and the selected program type are shown alternately in the display. When the tuner receives a program, the preset station number flashes.
4 Press +/ to continue searching for the
station number you want.
5 Press ENTER while the preset station
number you want is flashing. To stop the search while it is in progress
Loading a tape
1 Press A EJECT Z or Z B EJECT. 2 Insert a tape in deck A or B with the
side you want to play facing forward.
Insert with the side you want to play/record facing forward.
The deck stops automatically after repeating the sequence five times. You can fast-forward or rewind the tape, regardless of the selected source. When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that DOLBY NR B appears.
Searching for the beginning of a track (AMS)
During playback, press. or > repeatedly for the number of songs you want to skip forward (or backward). The search direction, + (forward) or (back), and number of songs being skipped (1~9) appear.
Example: searching forward 2 songs
Playing a tape
You can play any type of tape. TYPE I (normal), TYPE II (CrO2), or TYPE IV (metal). The deck automatically detects the tape type.
1 Load a recorded tape. 2 Press DIRECTION repeatedly to select
g to play one side. Select j to play both sides. Select RELAY (Relay Play)* to play both decks in succession.
3 Press H.
Press h to play the reverse side. The tape starts playing.
* Relay Play always follow this cyclic sequence: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side)
The AMS function may not operate correctly under the following circumstances: When the unrecorded space between songs is less than 4 seconds long. When the unit is placed near a television.
Stop play Pause (deck B only) Fast-forward Rewind Remove the cassette
Press x. Press X. Press again to resume play. Press M or m in stop mode. Press m or M in stop mode. Press A EJECT Z (or Z B EJECT).
Recording to a tape
CD Synchro Recording/High Speed Dubbing/Recording Manually/ Program Edit
You can record from a CD, tape or radio. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.
Steps Recording from a CD (CD Synchro Recording) Recording from a tape (High-Speed Dubbing) Recording Manually
Insert a recordable tape into deck B. Press FUNCTION repeatedly until CD appears. Press FUNCTION repeatedly until TAPE appears. Press FUNCTION or TUNER/BAND repeatedly until the source or band you want to record appears. Insert the CD/tape, or tune to the station you want to record. Press z REC.
Insert the CD you want to record. Press CD SYNC.
Insert the tape you want to record into deck A. Press H SPEED DUB.
DECK B stands by for recording. To reduce the hiss noise in low level high frequency signals, press DOLBY NR so that DOLBY NR B appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. Press X.
Recording starts. Start playing the source to be recorded.
To stop recording
When you want to record on the reverse side, press h after pressing z REC so that the indicator on the h button (for the reverse side) lights up green. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. For recording from the tape: If you set the direction to j when the tapes you use have different lengths, the tapes in each deck
8 Press X.
6 Insert a recordable tape into deck B. 7 Turn off the power.
When the recording starts, the volume level is set to the minimum.
Press x on the deck B and the CD player to stop recording.
Check the setting
To check the required tape length for recording a CD, press EDIT so that EDIT flashes after you have loaded a CD and switched function to CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).
Press TIMER SELECT. Press v/V to select SEL REC. Then, press ENTER/NEXT. To change the setting, start over from step 1. Press TIMER SELECT. Press v/V to select TIMER OFF. Then, press ENTER/NEXT.
Cancel timer operation
You cannot use Tape Select Edit for discs containing over 20 tracks. You cannot use this function when Program Play mode has been set. After clearing the entire program, follow the above procedure.
The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Timer recording will not be made. When you use the Sleep Timer, Daily Timer and Timer recording will not turn on the system until the Sleep Timer turns it off. Recording starts from the front side.
Adjusting the sound
To reinforce lower bass sound (SUPER WOOFER)
Selecting the audio emphasis effect
Selecting the preset effect from the music menu
Press SUPER WOOFER. Each time you press this button, the super woofer level display changes cyclically as follows: SUPER WOOFER FLAT t LOW t HIGH
To select the super woofer mode
Press DIRECT EQUALIZER button you want. The preset effect name appears. See the chart Music menu options.
Select USER FILE Cancel the effect
P.FILE FLAT (or FILE SELECT ON/OFF on the remote).
Press SUPER WOOFER MODE while the super woofer is on. Each time you press this button, the super woofer mode display changes as follows: MODE MOVIE y MODE MUSIC
For a powerful sound (GROOVE)
Music menu options
SUR appears if you select an effect with surround effects.
Press GROOVE. The volume switches to power mode, the equalizer curve changes, and the indicator on the GROOVE button lights up. Press GROOVE again to return to the previous volume.
SALSA REGGAE SAMBA TANGO MOVIE DANCE JAZZ ROCK GAME GUITAR
standard music sources
Canceling the Groove mode cancels the equalizer curve and super woofer level. Adjust the equalizer settings to obtain the desired effect.
soundtracks and special listening situations
Selecting the surround effect
Every time you press the button, the display changes as follows: SURROUND ON (SUR Y SURROUND OFF )
Making a personal audio emphasis file
You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the systems memory. Later, you can call up an audio pattern when playing a favorite tape, CD, or radio program. Before operating, first select the basic audio emphasis you want for your sound.
1 Press b/B to select the frequencies,
then press v/V to adjust the level.
ALL DISC S
2 Press ENTER/NEXT.
This setting is automatically stored as P.FILE. Any settings previously stored at this memory location are erased and replaced by the new settings.
To call up the personal file
If you choose another audio emphasis, the adjusted sound effect is lost. To retain the adjusted sound effect, press P.FILE.
Changing the spectrum analyzer display
Press SPECTRUM ANALYZER.
Each time you press the button, the display changes cyclically as follows: IMAGE ILLUMINATION t IMAGE t NORMAL ILLUMINATION t NORMAL
Singing along: Karaoke
You can sing along with any stereo CD or tape by turning down the singers voice. You need to connect an optional microphone.
With some songs, vocals may not be canceled when you select MIX GUITAR/KARAOKE. During MIX GUITAR/KARAOKE, equalizer and surround settings cannot be changed. If you select a sound effect, the karaoke mode is canceled. The instrumental sound may be reduced as well as the singers voice when the sound is recorded in monaural. The singers voice may not be reduced when: only a few instruments are playing. a duet is being played. the source has strong echoes or chorus. the singers voice deviates from the center. the voice on the source is singing in high soprano or tenor.
Check the remaining time Change the time to turn off Cancel the Sleep Timer function
SLEEP to select the time you want. SLEEP repeatedly until SLEEP OFF appears.
Playing a guitar with this unit may cause distortion or howling. To avoid this, do the followings: Move the guitar away from the speakers. Turn down the guitar volume.
Enhancing video game sound
You can enjoy the sound effect of video games.
1 Connect a video game player (see
Connecting MD deck/VCR/camcorder/ video game on page 23).
2 Press GAME at the right side corner on
the front panel (see qa, Parts Identification on page 4).
Waking up to music
You can wake up to music at a preset time every day. Make sure you have set the clock (see Setting the time on page 8).
Press TIMER SELECT and then press v/V to select DAILY, then press ENTER/NEXT. Start from step 1. Press TIMER SELECT and then v/V to select OFF, then press ENTER/NEXT.
Change the setting Cancel the timer operation
1 Prepare the music source you want to
CD: Load a CD. To start from a specific track, make a program (see Programming the CD tracks on page 10). Tape: Load a tape with the side you want to play facing forward. Radio: Tune in the preset station you want (see Presetting radio stations on page 12).
When you use the Sleep Timer, Daily Timer and Timer recording will not turn on the system until the Sleep Timer turns it off.
The power turns on 15 seconds before the preset time.
2 Adjust the volume. 3 Press c/CLOCK SET.
SET appears and DAILY flashes in the display.
4 Press v/V repeatedly to select
DAILY, then press ENTER/NEXT.
ON appears and the hour digits flash in the display.
5 Set the time to start playback.
Press v/V repeatedly to set the hour, then press ENTER/NEXT. The minute indication starts flashing. Press v/V repeatedly to set the minute, then press ENTER/NEXT. The hour indication flashes again.
6 Set the time to stop playback following
7 Press v/V repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T t TAPE PLAY T
8 Press ENTER/NEXT.
The start time, stop time, and the music source appear, then the original display appears.
9 Turn off the power.
To Do This
Connecting MD deck/VCR/ camcorder/video game
To the audio To the audio To the audio outputs of your inputs of your outputs of your MD deck MD deck VCR
Make a digital recording from CD to MD Listen to the connected MD deck Listen to the connected VCR Listen to the sound from the connected camcorder or video game
Connect the optical cable.
Press FUNCTION repeatedly until MD appears. Press FUNCTION repeatedly until VIDEO appears. Press FUNCTION repeatedly until GAME appears or press GAME at the right side corner on the front panel.
If sound is distorted when you connect your VCR to the VCR input jack of the unit, connect your VCR to the MD input jack instead. Be sure to match the color of the plugs and the connectors.
To the digital input of your MD deck
To the video input of your TV
To the video output of your VCR
To the video output of your video game
To the audio outputs of your video game
Connecting a turntable/ mixer
(mixer for European, North American, and Mexican models only)
To the outputs To the inputs of To the audio outputs of your mixer your mixer of your turntable
You can also record the sound produced by the mixer onto a tape.
Using a turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may produce the distortion or howling. To avoid this, do the following: 1 Keep some distance from speakers and the turntable. 2 Stop using the surround effect. 3 Install the speakers or the turntable on a firm and stable surface. 4 Press SUPER WOOFER repeatedly until the indicator on this button goes off. Replace the jumpers when the mixer is not in use. Otherwise, no sound will be heard. Be sure to connect the jumpers from the RETURN jack to the SEND jack of the unit. Two jumpers are pre-installed connecting the DJ MIX RETURN and SEND jacks.
Listen to the connected turntable Listen to the connected mixer
Press FUNCTION repeatedly until PHONO appears. 1 Remove the jumper from the unit. 2 Connect the SEND jack of the unit to the IN jack of the mixer with an optional cable. 3 Connect the RETURN jack of the unit to the OUT jack of the mixer with an optional cable. 4 Press FUNCTION repeatedly until CD appears.
On operating voltage
Before operating the unit, check that the operating voltage of your unit is identical with the voltage of your local power supply.
Discs with non- standard shapes (e.g., heart, square, star) cannot be played on this unit. Do not use such discs.
Cleaning the cabinet
Notes on CDs
Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents. Do not expose the CD to direct sunlight or heat sources.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette.
If you run into any problem using this unit, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
There is no guitar sound.
Turn VOLUME or GUITAR LEVEL to adjust the guitar volume. Make sure the guitar is connected to the GUITAR jack correctly. Select MIX GUITAR/KARAOKE by pressing MIX GUITAR/KARAOKE.
There is severe hum or noise.
A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR.
0:00 (or 12:00 AM) flashes in the display.
The display starts flashing as soon as you plug in the power cord even though you havent turned on the power.
A power interruption occurred. Set the clock and timer settings again.
The timer does not function.
Refer to demonstration (see page 7, step 4).
The clock setting is canceled.
Set the clock correctly.
DAILY and REC do not appear when you press the c/CLOCK SET button.
The power cord is disconnected or a power failure occurs. Redo Setting the time (on page 8). If you have set the timer, redo Waking up to music (on page 22) and Timer-recording radio programs (on page 17).
The radio presetting/timer setting is canceled.
Set the timer correctly. Set the clock.
The remote does not function.
The power cord is disconnected or a power failure occurs for longer than half a day. Redo Presetting radio stations (on page 12).
sensitivity 250 mV, impedance 1 kilohms accepts headphones of 8 ohms or more voltage 250 mV impedance 1 kilohm voltage 250 mV impedance 1 kilohm
accepts impedance of 4 to 16 ohms LBT-XG700/XG500/XG60: accepts impedance of 6 to 16 ohms * European, North American, and Mexican models only
CD player section
System Compact disc and digital audio system Laser Semiconductor laser (=780nm), Emission duration: continuous Wavelength nm Frequency response 2 Hz 20 kHz (0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB CD OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Wavelength: 660 nm Output level 18 dBm
North American and European models: SS-XG500 for LBT-XG500 Speaker system 3-way BUILT IN SW, bass-reflex type Speaker units Super Woofer/Woofer: 17 cm/17 cm, cone type Tweeter: 2.5 cm, horn type Rated impedance 6 ohms Dimensions (w/h/d) Approx. 330 mm (North American model) Approx. 375 mm (European model) Mass Approx. 9 kg net per speaker (North American model) Approx. 10 kg net per speaker (European model) Other models speaker SS-XG60 for LBT-XG60 Speaker system 3-way BUILT IN SW, bass-reflex type, magnetically shielded type Speaker units Super Woofer/Woofer: 17 cm/17 cm, cone type Tweeter: 2.5 cm, horn type Rated impedance 6 ohms Dimensions (w/h/d) Approx. 375 mm Mass Approx. 10 kg net per speaker SS-XG700/XG80 for LBT-XG700/XG80 Speaker system 3-way BUILT IN SW, bass-reflex type, magnetically shielded type Speaker units Super Woofer: 22 cm, cone type Woofer: 20 cm, cone type Tweeter: 2.5 cm, horn type Rated impedance SS-XGohms SS-XGohms Dimensions (w/h/d) Approx. 435 mm Mass Approx. 16 kg net per speaker
Tape player section
Recording system Frequency response (DOLBY NR OFF) Wow and flutter 4-track 2-channel stereo 40 13,000 Hz (3 dB), using Sony TYPE I cassette 40 14,000 Hz (3 dB), using Sony TYPE II cassette 0.15% W.Peak (IEC) 0.1% W.RMS (NAB) 0.2% W.Peak (DIN)
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range North American models: Other models: Antenna Antenna terminals Intermediate frequency
AM tuner section
87.5 108.0 MHz (100 kHz step) 87.5 108.0 MHz (50 kHz step) FM lead antenna 75 ohm unbalanced 10.7 MHz
530 1,710 kHz (with the interval set at 10 kHz) 531 1,710 kHz (with the interval set at 9 kHz) European and Middle Eastern models: 531 1,602 kHz (with the interval set at 9 kHz) Other models: 531 1,602 kHz (with the interval set at 9 kHz) 530 1,710 kHz (with the interval set at 10 kHz) Antenna AM loop antenna Antenna terminals External antenna terminal Intermediate frequency 450 kHz
Enjoy music, photos and video from your iPod while it charges Versatile functionality for playing content from CDs, DVDs, and USB drives 7 LCD screen lets you enjoy photo and video content in crystal clear resolution Take the party up a notch with Karaoke Mode A booming 360 Watts (180 W x 2) gives your gaming a boost Control your favorite music from across the room with the included remote
7 diagonal LCD Screen Play your iPod video, slide show. DVD3 or view a photo
8cm Disc (CD): Yes MP3: Yes
Tray Type: 3 Disc Tray
3-Disc CD/DVD player Play music or video from CD's, DVD's, iPod, and USB. Versatility Charge, play and control your , play a the radio or record and playback from the USB port. iPod 1 CD 2 , listen to
Nomal mode: All Disc; 1 Disc; Shuffle mode: 1 Disc; 1 Folder Program mode: Yes Repeat: Yes
MP3 File name: Yes ID3Tag Ver.1.1: Yes ID3Tag Ver.2.0: Yes
Sound performance 360 Watts (180 W x 2) and Karaoke feature allows you to sing along to your favorite tunes.
Type of Use: Shelf System Tray Type: 3 Disc with Exchange and Lock Disc Capacity: 3 Disc Tray
Speaker Front Speaker
System: 3-way Hybrid Dual Woofer Tweeter Unit: Xross Emission Horn, 5cm Speaker Terminal Main/Speaker: Push/Pig tail Length of Supplied cable(m): 2m Subwoofer Unit: 13cm x 1 Rated Impedance: 6 ohms
CD Play Mode(s): Normal; Shuffle; Program; Repeat Station Preset(s): 30 (10 AM, 20 FM) Equalizer: 3 Band
Station Preset(s): 20 (FM); 10 (AM) Tuner Type: FM/AM External FM/AM Antenna: Yes (75 ohm)
Micro Sound Station Audio
CD Play Mode(s): Normal; Shuffle; Program; Repeat
Dolby Digital Decoding: Yes DTS 96/24 Decoding: Yes
USB Memory Decoding Format for Sound (Playback)
MP3: Yes WMA: Yes AAC: Yes
Power Save Mode: Yes
Erase: 1 Folder; 1 Track
Display: 7" LCD display
Encoding Format for Sound (Record)
Output Power: 360W Total Battery Type: AA / Manganese (x2) (remote)
Nomal mode: Yes (Only 1 MEMORY) Shuffle mode: Yes ( 1 FOLDER) Repeat: Yes Resume: Yes
Progressive Scan: NTSC
Inputs and Outputs
Digital Audio Output(s): 1 (OPT) Headphone Input(s): 1 Composite Video Output(s): 1 USB Port(s): 1
Normal mode: Yes REC 1: Yes
CD: Yes MP3CD: Yes Tuner: Yes Audio Line IN (Analog): Yes iPod: Yes (Analog) Tape: Yes
Micro Sound Station Power
Battery Type: AA / Manganese (x2) (remote)
Analog Audio Input(s): 1
CD: x2.5 MP3CD: x20 (MAX) Tuner: x1 Audio Line IN (Analog): x1 iPod: x1
Equalizer: 3 Band
Timer: Rec/Play/Sleep (Tuner Time); Play/Sleep (CD Timer); Play/Sleep (USB Timer) Demo Mode: Yes VACS: Yes
MP3 File name: Yes ID3Tag Ver. 1.1: Yes ID3Tag Ver. 2.0: Yes
Display Type: 7" LCD display
Tape Player Mechanism
Recordable deck (A/B): Yes
Bass Boost function: GROOVE/Z-GROOVE Graphic Equalizer: 3 Band Preset EQ: 9 Programable EQ setting (User EQ): Yes EQ Edit: Yes
Weight: Main Unit: 25 lbs. Speaker: 10.6 lbs. Measurements: Main Unit: 8.2 12.8 17.3 inches Speakers: 9.9 13.7 10.4 inches
Tuner: Yes USB: Yes iPod1: Yes
"AA" Batteries (Manganese) x2 RM-AMU054 Remote Commander x 1 AM loop antenna x 1 FM lead antenna x 1 Video cord x 1 Speaker foot x 8 UPC Code: 027242757097 1. Compatible with iPod touch, iPod Nano 3rd generation, iPod classic, iPod Nano 2nd generation, iPod 5th generation, iPod Nano 1st generation, iPod 4th generation, iPod mini. 2. Not all files may play back due to file variations. Playback depends on recording conditions. 3. DVD media/formats are not universally compatible. 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony is a trademark of Sony. iPod is a trademark of Apple Computers, Inc. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice. Nonmetric weights and measures are approximate and may vary.
Headphone Input(s): Yes (3.5mm) Audio Line IN: 1 (analog) Mic: In (x 2)/Volume (x 2)/ Echo
Power Illuminator (color): 6 (Blue)
Power Output - Front (RMS 10%THD): 180W x 2 Power Output - Sub woofer (RMS): 180W x 2
DVD, VCD, CD Player D/A Converter
Decoding Format for Sound
CD: Yes CD-R: Yes CD-RW: Yes
Please visit the Dealer Network for current information at www.sony.com/dn Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 1.800.222.7669 www.sony.com Last Updated: 08/13/2009
Wide View P50542 SX-KN2600 4650 EN Vision HX2415 Enhwi-N2 KX-CL500 Uk HS-56W Octave KX-TG6432 Latitude X200 Asus P505 Lexmark X543 SL-CT790 CD-GT1 Mkii Ixus 50 Yamaha RX11 It 2000 WL-1600USB Zanussi T513 Grail KIP712W Iden I860 LA32B350 XPS510 MIO P550 CDP-CX260 KDC-7024 KD-G332 DC593W 42PD6600 Alesis BRC KX-TG8220FR RX-E100R LE40A557 567 Sa600 DAV-DZ820KW Autopilot Logitech Z-10 E-TEN M810 30V Date Gloss 60 28PT4475 58 TXP46G15E WRT54GX2 L1246EL SA-510 TI-30XS DUO-V39 M9050 MFP Edition Aficio 6010 BMW 318I Roland RS-9 Software Desktop 800 DV-18S-A WDH-928 CDA-7865R AFX-1000 Combo-Z IC-746PRO VGN-FE11M Kodak C913 RO200 DRU-820A YSP-1000 W3910 Review LE46C650l1W WL-500GP GTO507C Lexmark T420 DMC-LZ1EG CT-W205R WF-611STP Tecra 8000 Kudm24SE Asus P5A Repair Travelmate 2450 OHH60-71116C SF-515 VP-D352 KH 6519 32PW8505-12S DE Luxe RTS-E10T CVP-98-CVP-96-cvp-600 AEG-electrolux Z55 NV-DS5EG Touch Powershot A560 AJ-D455 LH-D6230 23 KW AL 1404 CDX-GT320
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101