Reviews & Opinions
Independent and trusted. Read before buy Sony MDR-RF925R!

Sony MDR-RF925R

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Sony MDR-RF925R, size: 396 KB
Related manuals
Sony MDR-RF925r Annexe 1
Sony MDR-RF925rk Annexe 1
Sony MDR-RF925RK

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony MDR-RF925RAbout Sony MDR-RF925R
Here you can find all about Sony MDR-RF925R like manual and other informations. For example: review.

Sony MDR-RF925R manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony MDR-RF925R please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony MDR-RF925R photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
vincent the Producer 4:25pm on Friday, September 3rd, 2010 
walk around headphones I like them just fine the cord is too long to cope with but all else is good
kmccombs 12:12am on Thursday, August 26th, 2010 
SONY MDR V150 STUDIO MONITOR HEADPHONES Choosing the right set of headphones to meet ones specific needs is not as simple as it used to... A good set of headphones are going to compliment your listening lifestyle and help you experience all the hidden sounds of your favorite music.
bear454 7:52pm on Thursday, June 24th, 2010 
"I have purchased two sets of the Dynamic Stereo Headphones MDR-V150. I really like the sound of the music with the headphones. "These are not really that portable, while they were light weight. the cord got caught on everything, and it was at an odd length. "There good headphones but sometimes it sounds a little unclear. I bough these headphones two days ago .
richman 12:34pm on Thursday, April 15th, 2010 
Why buy a pair for 10x the price? Maybe my ears are not "audiophile quality", but these headphones sound great. Exceelent Sound and Comfort These provide excellent sound, comfort and they are fairly durable. A very good sound experience for the price. Sound is nice, painful to wear I find the sound quality on these headphones to be nice, but they are very uncomfortable to wear.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

3-100-340-11(2)

N Getting started
Wireless Stereo Headphone System
Operating Instructions Mode demploi

Unpacking

Check that you have the following items: The headphones (1)
Rest the headphones on the transmitter so that the transmitters POWER/CHARGE indicator lights in red.
Please place the headphones on the transmitter so that the triangle arrow would be matched. If the headphones are not properly placed, it will not be charged. Charging will take about 16 hours, after which the POWER/CHARGE indicator will go off.

Headphones

Notes on Batteries
Do not charge a dry battery. Do not carry a dry battery together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects. If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage or corrosion.
Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Sending RF signals from the transmitter
The transmitter starts sending RF signals automatically when it detects an audio signal from the connected equipment. If it does not detect an audio signal for more than about 10 minutes, the transmitter will stop sending RF signals, and the POWER/CHARGE indicator will turn off. When the transmitter receives an audio signal again, it starts sending the RF signals, and the POWER/CHARGE indicator will light up green again. If the audio signal is very weak, the transmitter does not send RF signals. If the transmitter is connected to a headphone jack, make sure the volume of the equipment connected is set to 5 - 6 or higher. You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal.

N Additional information

Precautions
If the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet by holding the plug. Do not pull on the cord. Do not leave the wireless stereo headphone system in a location subject to direct sunlight, heat or moisture.

Polarity of the plug

Checking the remaining battery power
Pull up the self-adjusting band and check the POWER indicator located on the right housing. The battery is still serviceable when the indicator lights in red. Charge the rechargeable battery or install new dry batteries if the POWER indicator light dims, flashes, or the sound becomes distorted or noisy.
When the transmitter is placed on or near a TV, it may pick up a noise. In such a case, place the transmitter away from the TV. If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise.
Notes on headphones To reduce the risk of hearing damage
Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

The transmitter (1)

The rechargeable nickel-metal hydride battery should be replaced with new one when they last only half the expected time after a proper recharging. The rechargeable battery type BP-HP550-11 is not commercially available. You can order the battery from the store where you purchased this system, or at your nearest Sony dealer.

N Operating the system

The headphones automatically turn off when they are taken off Auto power on/off function
Do not pull up the self-adjusting band when not in use, as this will consume the battery power.

MDR-RF925RK MDR-RF970RK

AC power adaptor (1)

Listening to a program

Before listening
To reduce the risk of hearing damage, first lower the volume.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. If you have any questions or problems concerning the system that are not covered in this manual, please consult your nearest Sony dealer. Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.

POWER/CHARGE indicator

Transmitter

2007 Sony Corporation

Printed in China
About the charging method of the system

English

For the customers in the USA and Canada RECYCLING NICKEL METAL HYDRIDE BATTERIES
Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries.
Connecting cord (1) (phono plugs y stereo miniplug), 1 m
This system employs a contactless charge method that requires no terminals by the electromagnetic induction.
Setting up the transmitter 1 Connect the transmitter to audio/video

equipment.

Select one of the hookups below depending on the jack type: A To connect to a headphones jack
Transmitter To INPUT A jacks

Selfadjusting band

Turn on the audio/video equipment connected to the transmitter.
If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted.
Do not leave any metallic objects (coin, clip, etc.) near the transmitters charging point. The transmitter and the metal might become hot and it is dangerous.

Charging point

If hiss is heard, move closer to the transmitter. You may hear some noise when you disconnect the AC power adaptor from the transmitter before turn off the headphones.

Troubleshooting

No sound/Muffled sound
, Check the connection of the audio/video equipment or the AC power adaptor. , Check that the audio/video equipment is turned on. , Turn up the volume on the connected audio/ video equipment, if the transmitter is connected to the headphones jack. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The muting function is activated. Use the headphones near the transmitter. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Remove the headphones from the transmitter.
The transmitters POWER/CHARGE indicator lights up green.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Connect AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in AC power adaptor, disconnect it from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like.
Unimatch plug adaptor (1) (stereo mini jack y stereo phone plug) (MDR-RF970RK only)
Noise Reduction process (MDR-RF970RK only)
The transmitter unit compresses the audio signal and converts it to RF signal. The headphones unit converts the received RF signal to an audio signal and decompresses it. This process reduces noise picked up during transmission.

Transmitter unit

dynamic range
Rechargeable nickel-metal hydride battery BP-HP550-11 (1)
Do not leave any objects susceptible to magnetism (cash cards, floppy disks with magnetic coding, etc.) near the system. Exposure to the transmitters electromagnetic field may render them unusable.

3 CHANNEL

R DC IN 12V

L INPUT

Headphones unit

RF transmission

input signal

output signal

Right channel (red)
Left channel (white) Transmitter

decompression

noise level (low)

compression

Welcome!
Thank you for purchasing the Sony MDR-RF925RK/ RF970RK Wireless Stereo Headphone System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Some features are: Wireless transmission lets you enjoy TV or music without the restriction of a cord High fidelity sound reproduction Enhanced clarity of sound with minimal transmission noise by use of noise reduction technology (MDR-RF970RK only) Easy connection to TV and Audio system equipment Up to 150 feet reception range Hassle-free recharging by simply placing headphones on the transmitter base station; headphones charge via electromagnetic induction Convenient volume adjustment on the headphones Comfortable fit with adjustable headband and complete coverage of the ear Headphones automatically turn on when placed over the head and turn off when removed, saving battery power

Charging the supplied rechargeable battery
The supplied rechargeable nickel-metal hydride battery is not charged from the first time you use it. Be sure to charge it before use. To charge the headphones, place them on the transmitter.
Connecting cord (supplied) Rechargeable battery
Select the radio frequency with the CHANNEL selector switch.

Information

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/
Lines of magnetic force Transmitter Unimatch plug adaptor (MDR-RF970RK: supplied) To headphones jack (Stereo phone jack)
1 The transmitter unit compresses the audio signals dynamic range, then converts it to RF signal. 2 Noise may occur due to long distance transmission, etc. 3 The headphones unit converts the RF signal to an audio signal. 4 Noise may occur during conversion. 5 Decompression of the audio signals dynamic range reduces the noise level and improves the S/N (signal-to-noise) ratio.

Distortion

, If the transmitter is connected to the headphones jack, turn down the volume on the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.
Press the PUSH button of the left housing to open the battery compartment lid.
The battery compartment lid comes off.
Do not place a radio near the system. A noise may be heard from the radio. In such a case, change the angle of the radio or move away from the system so that a noise is not heard.
To headphones jack (Stereo mini jack) WALKMAN*, TV, etc.

Put on the headphones.

When you put on the headphones, the headphones power turns on automatically. The POWER indicator on the right housing glows red. Be sure to put the right housing R on your right ear and the left housing L on your left ear. Wear the headphones vertically on your head so that auto power on function is properly activated.
The effective areas of the transmitter
The optimum distance is up to approximately 150 feet without the system picking up some interference. However, the distance may vary depending on the surroundings and environment. If the system picks up some noise within the above mentioned distance, reduce the distance between the transmitter unit and the headphones, or select another channel.

Declaration of Conformity
Trade Name: Model No.: SONY MDR-RF925R MDR-RF970R (Headphones Unit) Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 USA 858-942-2230
When the transmitters POWER/CHARGE indicator does not light up red
Check if the right and left headphones are rested on the transmitter correctly. Remove the headphones and replace them on the transmitter again so that the POWER/CHARGE indicator lights in red.
B To connect to LINE OUT or REC OUT
Responsible Party: Address: Telephone No.:

PUSH button

To recharge the headphone battery after use
Insert the supplied rechargeable nickelmetal hydride battery into the battery compartment matching the 3 terminal on the battery to the 3 mark in the compartment.
Do not use rechargeable battery other than the supplied one.

To INPUT B jack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Place the headphones on the transmitter after use. Since the built-in timer recognizes when charging is complete, there is no need to remove the headphones from the transmitter after charging.
Notes on receiving performance
This system utilizes very high frequency signals in the 900 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the reception range or cause interference. Inside a building with walls containing steel beams. An area with many steel file cabinets, etc. An area with many electrical appliances capable of generating electromagnetic fields. The transmitter is placed on a metal instrument. An area facing a roadway. Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. Noise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways.
The transmitter automatically stops sending RF signals while charging the battery. This system is designed to charge only the supplied rechargeable battery type BP-HP550-11 for safety. Note that other types of rechargeable batteries cannot be charged with this system. If dry batteries are installed, they cannot be charged. Do not attempt to use the supplied BP-HP550-11 rechargeable battery for other components. They are for use with this system only. Charge in an environmental temperature of between 0 C and 40 C (between 32 F and 104 F).

3 CHANNEL R DC IN 12V A L INPUT B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
Set the channel to that of the transmitter with the selector (or button) on the right housing of the headphones.
A MDR-RF925RK Select the channel to that of the transmitter with the TUNING selector on the right housing of the headphones. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.
When you use the headphones inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. Even within the signal reception area, there are some spots (dead spots) where the RF signal cannot be received. This characteristics is inherent to RF signals, and does not indicate malfunction. By slightly moving the transmitter, location of the dead spot can be changed.

Loud background noise

, Move closer to the transmitter. As you move away from the transmitter, more noise is likely to be heard. , If the transmitter is connected to the headphones jack, turn up the volume of the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Replacing the ear pads

The ear pads are replaceable. If the ear pads become dirty or worn out, replace them as illustrated below. The ear pad is not commercially available. You can order replacements from the store where you purchased this system, or at your nearest Sony dealer.

Connecting cord (supplied)
Close the battery compartment lid.
1Insert the tab into the hole at the upper left. 2Close the lid until it clicks.

Charging and usage hours

Approx. charging hours*hour 16 hours*2 Approx. usage time*1
MDR-RF925RK MDR-RF970RK 60 minutes*minutes*hours*hours*3

Left channel (white)

VOLUME control

TUNING selector

3 VOLUME
Remove the old ear pad by pulling it out of the groove on the housing.

Specifications

General
Carrier frequency 915.5 MHz, 916.0 MHz, 916.5 MHz Channel Ch1, Ch2, Ch3 Modulation FM stereo Frequency response MDR-RF925R: 20 20,000 Hz MDR-RF970R: 10 22,000 Hz
To LINE OUT or REC OUT jacks
*1 at 1 kHz, 1 mW+1 mW output *2 hours required to fully charge an empty battery *3 Time stated above may vary, depending on the temperature or conditions of use.

Stereo system, VCR, etc.

Using the headphones with dry batteries (sold separately)
Connect the supplied AC power adaptor to the transmitter.
Commercially available (size AAA) dry batteries can also be used to power the headphones. Install the batteries in the same manner as described in steps 1 through 3 of Charging the supplied rechargeable battery. When dry batteries are installed, the battery charge function will not be activated.
* WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation.
B MDR-RF970RK Press the TUNING button briefly for automatic tuning of the headphones. If you do not receive a clear audio signal, press it again. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.
Place the new ear pad on the driver unit.
Hang the edge of the ear pad on one side of the driver units groove edge, then turn the edge of ear pad around the driver unit as illustrated below. When the ear pad is securely inserted into the groove, adjust the ear pad to the vertical position.
Transmitter TMR-RF925R, RF970R
Power source DC 12 V: supplied AC power adaptor Audio input Phono jacks, stereo mini jack Dimensions Approx. 96 mm (8 5/1/7/8 in) (w/h/d) Mass Approx. 220 g (7.77 oz)
For the customers in Canada
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

doc1

3-100-340-11(2)

N Getting started
Wireless Stereo Headphone System
Operating Instructions Mode demploi

Unpacking

Check that you have the following items: The headphones (1)
Rest the headphones on the transmitter so that the transmitters POWER/CHARGE indicator lights in red.
Please place the headphones on the transmitter so that the triangle arrow would be matched. If the headphones are not properly placed, it will not be charged. Charging will take about 16 hours, after which the POWER/CHARGE indicator will go off.

Headphones

Notes on Batteries
Do not charge a dry battery. Do not carry a dry battery together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects. If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage or corrosion.
Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Sending RF signals from the transmitter
The transmitter starts sending RF signals automatically when it detects an audio signal from the connected equipment. If it does not detect an audio signal for more than about 10 minutes, the transmitter will stop sending RF signals, and the POWER/CHARGE indicator will turn off. When the transmitter receives an audio signal again, it starts sending the RF signals, and the POWER/CHARGE indicator will light up green again. If the audio signal is very weak, the transmitter does not send RF signals. If the transmitter is connected to a headphone jack, make sure the volume of the equipment connected is set to 5 - 6 or higher. You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal.

N Additional information

Precautions
If the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet by holding the plug. Do not pull on the cord. Do not leave the wireless stereo headphone system in a location subject to direct sunlight, heat or moisture.

Polarity of the plug

Checking the remaining battery power
Pull up the self-adjusting band and check the POWER indicator located on the right housing. The battery is still serviceable when the indicator lights in red. Charge the rechargeable battery or install new dry batteries if the POWER indicator light dims, flashes, or the sound becomes distorted or noisy.
When the transmitter is placed on or near a TV, it may pick up a noise. In such a case, place the transmitter away from the TV. If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise.
Notes on headphones To reduce the risk of hearing damage
Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

The transmitter (1)

The rechargeable nickel-metal hydride battery should be replaced with new one when they last only half the expected time after a proper recharging. The rechargeable battery type BP-HP550-11 is not commercially available. You can order the battery from the store where you purchased this system, or at your nearest Sony dealer.

N Operating the system

The headphones automatically turn off when they are taken off Auto power on/off function
Do not pull up the self-adjusting band when not in use, as this will consume the battery power.

MDR-RF925RK MDR-RF970RK

AC power adaptor (1)

Listening to a program

Before listening
To reduce the risk of hearing damage, first lower the volume.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. If you have any questions or problems concerning the system that are not covered in this manual, please consult your nearest Sony dealer. Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.

POWER/CHARGE indicator

Transmitter

2007 Sony Corporation

Printed in China
About the charging method of the system

English

For the customers in the USA and Canada RECYCLING NICKEL METAL HYDRIDE BATTERIES
Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries.
Connecting cord (1) (phono plugs y stereo miniplug), 1 m
This system employs a contactless charge method that requires no terminals by the electromagnetic induction.
Setting up the transmitter 1 Connect the transmitter to audio/video

equipment.

Select one of the hookups below depending on the jack type: A To connect to a headphones jack
Transmitter To INPUT A jacks

Selfadjusting band

Turn on the audio/video equipment connected to the transmitter.
If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted.
Do not leave any metallic objects (coin, clip, etc.) near the transmitters charging point. The transmitter and the metal might become hot and it is dangerous.

Charging point

If hiss is heard, move closer to the transmitter. You may hear some noise when you disconnect the AC power adaptor from the transmitter before turn off the headphones.

Troubleshooting

No sound/Muffled sound
, Check the connection of the audio/video equipment or the AC power adaptor. , Check that the audio/video equipment is turned on. , Turn up the volume on the connected audio/ video equipment, if the transmitter is connected to the headphones jack. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The muting function is activated. Use the headphones near the transmitter. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.
Remove the headphones from the transmitter.
The transmitters POWER/CHARGE indicator lights up green.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Connect AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in AC power adaptor, disconnect it from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like.
Unimatch plug adaptor (1) (stereo mini jack y stereo phone plug) (MDR-RF970RK only)
Noise Reduction process (MDR-RF970RK only)
The transmitter unit compresses the audio signal and converts it to RF signal. The headphones unit converts the received RF signal to an audio signal and decompresses it. This process reduces noise picked up during transmission.

Transmitter unit

dynamic range
Rechargeable nickel-metal hydride battery BP-HP550-11 (1)
Do not leave any objects susceptible to magnetism (cash cards, floppy disks with magnetic coding, etc.) near the system. Exposure to the transmitters electromagnetic field may render them unusable.

3 CHANNEL

R DC IN 12V

L INPUT

Headphones unit

RF transmission

input signal

output signal

Right channel (red)
Left channel (white) Transmitter

decompression

noise level (low)

compression

Welcome!
Thank you for purchasing the Sony MDR-RF925RK/ RF970RK Wireless Stereo Headphone System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Some features are: Wireless transmission lets you enjoy TV or music without the restriction of a cord High fidelity sound reproduction Enhanced clarity of sound with minimal transmission noise by use of noise reduction technology (MDR-RF970RK only) Easy connection to TV and Audio system equipment Up to 150 feet reception range Hassle-free recharging by simply placing headphones on the transmitter base station; headphones charge via electromagnetic induction Convenient volume adjustment on the headphones Comfortable fit with adjustable headband and complete coverage of the ear Headphones automatically turn on when placed over the head and turn off when removed, saving battery power
Charging the supplied rechargeable battery
The supplied rechargeable nickel-metal hydride battery is not charged from the first time you use it. Be sure to charge it before use. To charge the headphones, place them on the transmitter.
Connecting cord (supplied) Rechargeable battery
Select the radio frequency with the CHANNEL selector switch.

Information

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/
Lines of magnetic force Transmitter Unimatch plug adaptor (MDR-RF970RK: supplied) To headphones jack (Stereo phone jack)
1 The transmitter unit compresses the audio signals dynamic range, then converts it to RF signal. 2 Noise may occur due to long distance transmission, etc. 3 The headphones unit converts the RF signal to an audio signal. 4 Noise may occur during conversion. 5 Decompression of the audio signals dynamic range reduces the noise level and improves the S/N (signal-to-noise) ratio.

Distortion

, If the transmitter is connected to the headphones jack, turn down the volume on the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Press the PUSH button of the left housing to open the battery compartment lid.
The battery compartment lid comes off.
Do not place a radio near the system. A noise may be heard from the radio. In such a case, change the angle of the radio or move away from the system so that a noise is not heard.
To headphones jack (Stereo mini jack) WALKMAN*, TV, etc.

Put on the headphones.

When you put on the headphones, the headphones power turns on automatically. The POWER indicator on the right housing glows red. Be sure to put the right housing R on your right ear and the left housing L on your left ear. Wear the headphones vertically on your head so that auto power on function is properly activated.
The effective areas of the transmitter
The optimum distance is up to approximately 150 feet without the system picking up some interference. However, the distance may vary depending on the surroundings and environment. If the system picks up some noise within the above mentioned distance, reduce the distance between the transmitter unit and the headphones, or select another channel.
Declaration of Conformity
Trade Name: Model No.: SONY MDR-RF925R MDR-RF970R (Headphones Unit) Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 USA 858-942-2230
When the transmitters POWER/CHARGE indicator does not light up red
Check if the right and left headphones are rested on the transmitter correctly. Remove the headphones and replace them on the transmitter again so that the POWER/CHARGE indicator lights in red.
B To connect to LINE OUT or REC OUT
Responsible Party: Address: Telephone No.:

PUSH button

To recharge the headphone battery after use
Insert the supplied rechargeable nickelmetal hydride battery into the battery compartment matching the 3 terminal on the battery to the 3 mark in the compartment.
Do not use rechargeable battery other than the supplied one.

To INPUT B jack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Place the headphones on the transmitter after use. Since the built-in timer recognizes when charging is complete, there is no need to remove the headphones from the transmitter after charging.
Notes on receiving performance
This system utilizes very high frequency signals in the 900 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the reception range or cause interference. Inside a building with walls containing steel beams. An area with many steel file cabinets, etc. An area with many electrical appliances capable of generating electromagnetic fields. The transmitter is placed on a metal instrument. An area facing a roadway. Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. Noise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways.

The transmitter automatically stops sending RF signals while charging the battery. This system is designed to charge only the supplied rechargeable battery type BP-HP550-11 for safety. Note that other types of rechargeable batteries cannot be charged with this system. If dry batteries are installed, they cannot be charged. Do not attempt to use the supplied BP-HP550-11 rechargeable battery for other components. They are for use with this system only. Charge in an environmental temperature of between 0 C and 40 C (between 32 F and 104 F).
3 CHANNEL R DC IN 12V A L INPUT B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
Set the channel to that of the transmitter with the selector (or button) on the right housing of the headphones.
A MDR-RF925RK Select the channel to that of the transmitter with the TUNING selector on the right housing of the headphones. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.
When you use the headphones inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. Even within the signal reception area, there are some spots (dead spots) where the RF signal cannot be received. This characteristics is inherent to RF signals, and does not indicate malfunction. By slightly moving the transmitter, location of the dead spot can be changed.

Loud background noise

, Move closer to the transmitter. As you move away from the transmitter, more noise is likely to be heard. , If the transmitter is connected to the headphones jack, turn up the volume of the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Replacing the ear pads

The ear pads are replaceable. If the ear pads become dirty or worn out, replace them as illustrated below. The ear pad is not commercially available. You can order replacements from the store where you purchased this system, or at your nearest Sony dealer.
Connecting cord (supplied)
Close the battery compartment lid.
1Insert the tab into the hole at the upper left. 2Close the lid until it clicks.

Charging and usage hours

Approx. charging hours*hour 16 hours*2 Approx. usage time*1
MDR-RF925RK MDR-RF970RK 60 minutes*minutes*hours*hours*3

Left channel (white)

VOLUME control

TUNING selector

3 VOLUME
Remove the old ear pad by pulling it out of the groove on the housing.

Specifications

General
Carrier frequency 915.5 MHz, 916.0 MHz, 916.5 MHz Channel Ch1, Ch2, Ch3 Modulation FM stereo Frequency response MDR-RF925R: 20 20,000 Hz MDR-RF970R: 10 22,000 Hz
To LINE OUT or REC OUT jacks
*1 at 1 kHz, 1 mW+1 mW output *2 hours required to fully charge an empty battery *3 Time stated above may vary, depending on the temperature or conditions of use.

Stereo system, VCR, etc.

Using the headphones with dry batteries (sold separately)
Connect the supplied AC power adaptor to the transmitter.
Commercially available (size AAA) dry batteries can also be used to power the headphones. Install the batteries in the same manner as described in steps 1 through 3 of Charging the supplied rechargeable battery. When dry batteries are installed, the battery charge function will not be activated.
* WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation.
B MDR-RF970RK Press the TUNING button briefly for automatic tuning of the headphones. If you do not receive a clear audio signal, press it again. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.

Place the new ear pad on the driver unit.
Hang the edge of the ear pad on one side of the driver units groove edge, then turn the edge of ear pad around the driver unit as illustrated below. When the ear pad is securely inserted into the groove, adjust the ear pad to the vertical position.
Transmitter TMR-RF925R, RF970R
Power source DC 12 V: supplied AC power adaptor Audio input Phono jacks, stereo mini jack Dimensions Approx. 96 mm (8 5/1/7/8 in) (w/h/d) Mass Approx. 220 g (7.77 oz)
For the customers in Canada
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

To DC IN 12V jack

Transmitter To an AC outlet AC power adaptor (supplied)

Battery life

(Using Sony alkaline batteries LR03/AM-4 (N))
Model MDR-RF925RK MDR-RF970RK Approx. hours*hours*hours*2

TUNING button

TUNING
Headphones MDR-RF925R, RF970R

VOLUME

*1 at 1 kHz, 1 mW+1 mW output *2 Time stated above may vary, depending on the temperature or conditions of use.
Power source Supplied rechargeable nickel-metal hydride battery BP-HP550-11 or commercially available (size AAA) dry batteries Mass Approx. 300 g (10.59 oz) incl. Battery
Design and specifications are subject to change without notice.

Franais

N Prparatifs

Dballage

Vrifiez que vous disposez des accessoires suivants :
Placez le casque sur le transmetteur de manire que lindicateur POWER/CHARGE du transmetteur sallume en rouge.
Placez le casque sur le transmetteur de faon ce quil saligne sur le repre triangulaire. Si le casque nest pas install correctement, il ne sera pas charg. La charge dure environ 16 heures, lissue desquelles lindicateur POWER/CHARGE steint.

Casque

Dure de vie de la pile
(Avec des piles alcalines Sony LR03/AM-4 (N))
Modle MDR-RF925RK MDR-RF970RK Dure approximative*heures*heures*2
Branchez ladaptateur secteur fourni dans le transmetteur.

AVERTISSEMENT

Afin de rduire les risques dincendie ou de choc lectrique, nexposez pas cet appareil la pluie ni lhumidit.
Pour rduire les risques dincendie ou dlectrocution, ne placez pas de rcipients remplis de liquides (vases, etc.) sur lappareil. Pour viter tout risque dlectrocution, nouvrez pas le coffret. Ne confiez les rparations qu un technicien qualifi. Raccordez ladaptateur secteur une prise murale facilement accessible. Si ladaptateur secteur ne fonctionne pas normalement, dbranchez-le immdiatement de la prise murale. Ninstallez pas lappareil dans un espace restreint, comme une bibliothque ou un meuble encastr. Nexposez pas la pile une chaleur excessive comme la lumire directe du soleil, au feu ou dautres sources de chaleur.

 

Tags

Projectors VGN-FW21ZR EB-1730W SW80010-M ZAN1210 CD2350S B2031A CS 2150 CD1501B 53 KX-TCD445 ZCV782 Machine RFX-300 VGN-NS21s S Nikon D200 P-661HW 480SXU DVR-RT500 CQ-C9901N 2 5 FW870C Iden I860 KDL-32EX500 CLP-1001 HMS1000TVE 29PT9020 12 LGD435 LS-J0962HL X-MAX 250 Singer 42 Software W710I Travelmate 5730 Impreza P1 Oregon 550 Beretta 92 RS261mdbp KX-F3550BS DMC-GH1K CD2352S-19 CR-2020 ERZ36700X8 About SET 1200 ED KD-G342 A8S-x-SE Jose Mp41 Motorola W362 BMW 320 HT-C555 CDA-9856 Boardwalk Iriver T20 XRS 9640 DVR-XD09 GT5 0C VSX-515-S Aspire-5050 PS-3000 Nokia 1203 11471 47SL9000 VGN-NS11m S Samsung ST45 FL411CN VGN-NW Soundstation 2W 29PT5606 Motorokr Z6 1000 QX Review KDL-22EX302 S5 77C Aopen MX34 Strobe Mkii NAD C542 DV-563A GP 40 E835 S Dvcr-B200 Waht-SD1 PLA2200 SV-SD710 MP 6500 KDL-46NX711 WS-210S HW-C1270tve-F 171SPF M-3030 Doro BM50 Infocus IN34 CN 3656 220 CDI 26LB75 Me II 42RV625D KIP713W Micro 101MR Rome-total WAR CS5200

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101