Here you can find all about Sony MHC-GT444 like manual and other informations. For example: .
Sony MHC-GT444 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony MHC-GT444 please write about it to help other people. [ Report abuse or wrong photo | Share your Sony MHC-GT444 photo ]
Sony MHC-GT444, size: 1.7 MB
Sony MHC-GT444 Annexe 1
Sony MHC-GT444 Annexe 2
Sony Genezi MHC GT444
User reviews and opinions
|dc40894||4:50pm on Sunday, June 27th, 2010|
|good overall easy to use,small and compact yet easy to see dissapointed it did not fit into a new docking station. The product performs exactly as described - the sound quality (and quantity!) is fantastic.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Mini Hi-Fi Component System
Operating Instructions MHC-GT555BP/GT555 MHC-GT444BP/GT444 MHC-GT222BP/GT222 MHC-GT111BP/GT111 LBT-ZT4
2008 Sony Corporation
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss. CAUTION The use of optical instruments with this product will increase eye hazard.
Notice for the customers in the United States Owners Record
The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.
The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
M DISC SKIP/EX-CHANGE (pages 15, 17, 28, 30) Press to select a disc. Press to exchange a disc while playing. N PHONES jack Connect the headphones. O LBT-ZT4 only AUDIO INPUT jack (page 25) Other models AUDIO INPUT L/R jacks (page 25) Connect to an audio component (Portable audio player, etc.). P (USB) indicator Lights up in red when transferring to the connected optional USB device or when erasing audio files or folders. (USB) port (pages 19, 20, 22, 36) Connect an optional USB device. Q MIC jack (page 31) Connect an optional microphone. MIC LEVEL (page 31) Turn to adjust the microphone volume. R Disc tray (pages 17, 38) S Z OPEN/CLOSE (page 17) Press to insert or eject a disc. T REC TO USB (pages 19, 20) Press to transfer onto the connected optional USB device.
U DISC (page 17) Press to select a disc. Press to switch to the CD function from other function. V MASTER VOLUME (pages 17, 18, 22, 24, 25) Turn to adjust the volume. W OPERATION DIAL (pages 17, 20, 23, 26, 31, 33) Turn to select a setting in the OPTIONS menu. Turn to select a track, file or folder. X PRESET EQ (pages 26, 31), GROOVE (pages 26, 31), SURROUND (page 26) Press to select a sound effect. EQ BAND (page 31) Press to select the frequency band. Y Display (page 26) Z Tape deck (pages 24, 30) wj z (record) (page 30) Press to record onto a tape. B (play) (pages 24, 30) Press to start tape playback.
* The B button has a tactile dot. Use the tactile dot as a reference when operating the system.
m/M (rewind/fast forward) (page 24) Press to rewind/fast forward a tape.
x Z (stop/eject) (pages 24, 30) Press to stop tape playback. Press to insert or eject a tape. X (pause) (pages 24, 30) Press to pause tape playback.
D TIMER MENU (pages 16, 32, 33) Press to set the clock and the timers. E
V/v/b/B (pages 16, 32)
Press to select the settings. (pages 16, 28, 32) Press to enter the selection. F TOOL MENU Press to select the menu of the component connected to the DIGITAL MEDIA PORT adapter. G./> (go back/go forward) (pages 17, 23, 28) Press to select a track or file. +/ (select folder) (pages 17, 23, 28) Press to select a folder. +/ (tuning) (page 18) Press to tune in the station you want. m/M (rewind/fast forward) (pages 17, 23) Press to find a point in a track or file.
3 Press PLAY MODE repeatedly in
stop mode to select the play mode. The play mode automatically changes to normal play mode, if you start transferring in shuffle play mode, repeat play mode or in program play mode (when no tracks or MP3 files are programmed). For details about the play mode, see To change the play mode (page 18).
4 Press REC TO
on the unit.
USB, SYNC and REC light up in the display. Then, transferring starts when DONT REMOVE appears in the display. When the transferring is completed, the disc and the USB device stop automatically.
CD-USB Synchronized Transfer
You can easily transfer an entire disc onto an USB device.
1 Connect a transferable USB
device to the (USB) port as shown below.
Transferring a single track or MP3 file during playback (REC1 Transferring)
You can easily transfer the track or MP3 file that is currently being played back onto an USB device.
device to the the unit. (USB) port on
3 Select the track or MP3 file you
want to transfer, then start play.
When the USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. Continued l
USB on the unit while the selected track or MP3 file is being played back.
To create a new MP3 file
Press REC TO USB on the unit. NEW TRACK appears in the display. If you press REC TO USB again after a few seconds, NOT IN USE appears in the display and a new MP3 file cannot be created.
USB and REC light up in the display. Then, transferring starts from the beginning of the track or file when DONT REMOVE appears in the display. When the transferring is completed, the disc continues to play.
To transfer sound from a microphone
Transferring from a sound source other than disc (Analog Transferring)
You can easily transfer from a tape, tuner, optional audio component or component connected to the DIGITAL MEDIA PORT adapter onto an USB device.
1 Press FUNCTION (RM-AMU006)
or FUNCTION +/ (RM-AMU008) repeatedly (or press TAPE on the unit) to select the TAPE function, and do not start playing any tape.
device to the the unit. transfer. For tape, insert a tape. For tuner, tune in the station you want to transfer. (USB) port on
2 Press REC TO USB on the unit. 3 Start singing or speaking into the
2 Select the source you want to 3 Start play back the source. 4 Press REC TO USB on the unit.
USB and REC light up in the display. Then, transferring starts when DONT REMOVE appears in the display.
A new MP3 file is created automatically after approximately 1 hour of transferring. Transferring stops automatically when you change the function or tuner band.
To select the playback source or transferring destination on a Sony Ericsson mobile phone
When listening to music from a Sony Ericsson mobile phone or when transferring music from this system to the mobile phone, you can select the playback source or transferring destination as follows: internal memory of the mobile phone. external memory (such as Memory Stick, etc.).
1 Connect the mobile phone to the
(USB) port on the unit.
2 Press OPTIONS on the unit in
To stop transferring
3 Turn OPERATION DIAL on the
unit to select USB SELECT.
4 Press ENTER on the unit.
The drive name of the mobile phone appears in the display but varies depending on the specification of the mobile phone.
TransferFolder name File name ring source MP3 REC15) AUDIO CD Same as the transferring source2) TRACK0014)
5 Turn OPERATION DIAL on the
unit to select the drive you want.
6 Press ENTER on the unit. 7 Start playback of the audio files
in the selected drive of the mobile phone or start transferring.
TransferFolder name File name ring source FM AM TAPE AUDIO DMPORT
TUFM0013) TRACK0014) TUAM0013) TAPE0013) EXAU0013) EXDP0013)
To remove the USB device
to select the USB
2 Hold down x in stop mode until
NO DEVICE appears.
3 Remove the USB device.
Folder and file generation rules
When transferring to an USB device, a MUSIC folder is created directly below the ROOT. Folders and files are generated within this MUSIC folder as follows according to the transferring method and source.
CD-USB Synchronized Transfer1)
TransferFolder name File name ring source MP3 Same as the transferring source2)
In Program Play mode, the folder name is PGM_xxx, and the file name depends on the transferring source (AUDIO CD or MP3 disc). 2) Up to 32 characters of the name are assigned. 3) Folder numbers are assigned serially thereafter. 4) File numbers are assigned serially thereafter. 5) A new file is transferred in the REC1 folder each time REC1 Transferring is performed.
AUDIO CD CDDA0013) TRACK0014)
Do not connect the system and the USB device through an USB hub. When transferring from an AUDIO CD, the tracks are transferred as 128 kbps MP3 files. When transferring from an MP3 disc, MP3 files are transferred with the same bit rate as the original MP3 files. When transferring from a source other than disc, the files are transferred as 128 kbps MP3 files. While transferring from an MP3 disc, no sound is output. CD-TEXT information is not transferred in the created MP3 files. If you cancel the transferring partway, an MP3 file is created up to the point when the transferring was stopped. Transferring stops automatically if: the USB device runs out of space during transferring. the number of audio files on the USB device reaches the limit for the number that the system can recognize. the function or tuner band is changed. Up to 999 audio files or 997 folders can be transferred on a single USB device. The maximum number of audio files and folders may vary depending on the audio file and folder structure. If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or file. Do not remove the USB device during transferring or erase operations. Doing so may corrupt the data on the USB device or damage the USB device itself. You cannot eject the disc, select another disc, track or file, pause playback or find a point in the track or file during CD-USB Synchronized Transfer or REC1 Transferring.
X (or NX on the unit). To resume play, press the button again.
x. To resume play,
press N (or press NX on the unit).1) To cancel resume play, press the button twice and check that RESUME disappears from the display.
When the USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. Do not connect the system and the USB device through an USB hub. With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. If the system is turned off during Resume Play mode, when the system is turned on again playback starts from the beginning of the audio file. This system does not necessarily support all the functions provided in a connected USB device. The playback order for the system may differ from the playback order of the connected digital music player. Do not save other types of files or unnecessary folders on an USB device. Folders that have no audio files are skipped. The maximum number of audio files and folders on an USB device that can be recognized by this system is 999 (including ROOT and MUSIC folder). The maximum number of audio files and folders may vary depending on the file and folder structure. The system can play the following format of audio files: MP3 with file extension.mp3. AAC with file extension.m4a. Windows Media Audio (WMA) with file extension.wma. If the audio files have the above file extension but are not the respective formats, the system may produce noise or may malfunction. Compatibility with all MP3, AAC or WMA encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. You cannot erase audio files and folders in shuffle play mode or program play mode. If the folder to be erased does not contain MP3/AAC/WMA files or contains sub folders, these are not erased. The Program Play setting is erased when the erase operation is performed.
Playing a tape
Use the controls on the tape deck for this operation.
1 Select the TAPE function.
Press FUNCTION (RM-AMU006) or FUNCTION +/ (RM-AMU008) repeatedly (or press TAPE on the unit).
2 Insert a tape.
Press x Z, and insert a TYPE I (normal) tape into the tape holder with the side you want to play facing up. Make sure there is no slack in the tape to avoid damaging the tape or the tape deck. Press the tape deck lid on the unit to close the tape holder.
Press CD (RM-AMU006) or press FUNCTION +/ (RM-AMU008) repeatedly (or press CD on the unit) to select the CD function. Load the disc you want to record, and press DISC SKIP repeatedly to select the disc. To select the play mode, press PLAY MODE repeatedly in stop mode (see To change the play mode (page 18)). To record your favorite CD tracks or MP3 files in the order you want, perform steps 2 to 6 of Creating your own program (page 28).
Creating your own sound effect
You can raise or lower the levels of specific frequency ranges or select the surround effect, and then store the setting as USER EQ in the memory. Use the buttons on the unit for this operation.
You can sing along by connecting an optional microphone.
1 Turn MIC LEVEL on the unit to
MIN to turn down the microphone volume level.
2 Connect an optional microphone
to the MIC jack on the unit.
1 Press PRESET EQ or GROOVE
repeatedly to select the audio emphasis you want for your basic sound.
3 Start playing the music. 4 Turn MIC LEVEL on the unit to
adjust the microphone volume. If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone. After you have finished, disconnect the microphone from the MIC jack on the unit.
2 Press EQ BAND repeatedly to
select a frequency band or surround effect setting, and then turn OPERATION DIAL to adjust the equalizer level or select the surround effect you want. Repeat this for each band you want to adjust.
REC ST AUTO TUNED
3 Press ENTER.
USER EQ appears and the setting is stored in the memory.
To call up the personal sound effect
Press PRESET EQ repeatedly until USER EQ appears.
To cancel the sound effect
Press PRESET EQ repeatedly until FLAT appears.
1 Prepare the sound source. Using the Timers
The system offers three timer functions. You cannot activate both the Play Timer and the Recording Timer at the same time. If you use either with the Sleep Timer, the Sleep Timer has priority.
Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 28).
You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select AUTO, the system automatically turns off after the disc stops or after 100 minutes in CD function. after the USB device stops or after 100 minutes in USB function. after 100 minutes in other functions. Do not select AUTO during CD-TAPE Synchro Recording, CD-USB Synchronized Transfer, or during the erase operation.
The system will not turn off automatically at the preset time when you perform the erase operation in USB function. play a tape. record onto a tape.
Tune in the preset radio station (page 29).
2 Press CLOCK/TIMER SET
(RM-AMU006) or TIMER MENU (RM-AMU008).
3 Press./> (RM-AMU006)
or v/V (RM-AMU008) repeatedly to select PLAY SET or REC SET, and then press ENTER (RM-AMU006) or (RM-AMU008). ON appears, and the hour indication flashes.
4 Set the time to start playing or
recording. Press./> (RM-AMU006) or v/V (RM-AMU008) repeatedly to set the hour, and then press ENTER (RM-AMU006) or (RM-AMU008). The minute indication flashes. Use the procedure above to set the minutes.
Play Timer/Recording Timer
Make sure you have set the clock.
5 Use the same procedure as in
step 4 to set the time to stop playing or recording.
You can wake up to disc, tuner or optional USB device at a preset time.
You can transfer music from a preset radio station into an USB device at a specified time.
6 Select the sound source or
prepare the USB device.
To activate or check the timer again
RM-AMU006: Press CLOCK/TIMER SELECT, press./> repeatedly until PLAY SELECT or REC SELECT appears, and then press ENTER. RM-AMU008: Press TIMER MENU to select TIMER SELECT, then press. Press v/V repeatedly until PLAY SELECT or REC SELECT appears, and then press. Unit: Press REC TIMER, turn OPERATION DIAL until REC SELECT appears, and then press ENTER.
Press./> (RM-AMU006) or v/V (RM-AMU008) repeatedly until the sound source you want appears, and then press ENTER (RM-AMU006) or (RM-AMU008). The display shows the timer settings.
Connect a transferable USB device to the (USB) port on the unit. The display shows the timer settings.
7 Press "/1 to turn off the system.
To set the Recording Timer using the controls on the unit (REC TIMER)
To cancel the timer
Repeat the same procedure as above until TIMER OFF appears, and then press ENTER (RM-AMU006 or on the unit) or (RM-AMU008).
Play does not start from the first track.
The display starts flashing as soon as you plug in the power cord even though you have not turned on the system.
Press PLAY MODE repeatedly until both PGM and SHUF light off in the display to return to normal play.
Press DISPLAY once while the system is turned off. The demonstration disappears.
Starting playback takes more time than usual.
Transferring to an USB device results in an error.
The following MP3 discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders.
You cannot start transferring to an USB device.
The following problems may have occurred. The USB device is full. The number of audio files and folders on the USB device has reached the upper limit. The USB device is write-protected.
Transferring is stopped before it is finished.
You are using an unsupported USB device. See Compatible USB devices with this system (page 45) for the supported device types. The USB device was disconnected or the power was turned off during transferring. Delete the partiallytransferred file, and transfer again. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual on how to deal with this problem. Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again.
Audio files or folders on the USB device cannot be erased.
You are using an unsupported USB device. See Compatible USB devices with this system (page 45) for the supported device types. The USB device is not formatted correctly. Refer to the USB device operation manual on how to format. Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again. If the transferring and erase operations are repeated multiple times, the file structure within the USB device becomes complex. Refer to the USB device operation manual on how to deal with this problem.
Check if the USB device is writeprotected. The USB device was disconnected or the power was turned off during the erase operation. Delete the partiallyerased file. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual on how to deal with this problem.
Are you using a supported USB device?
If you connect an unsupported USB device, the following problems may occur. See Compatible USB devices with this system (page 45) for the supported device types. The USB device is not recognized. File or folder names are not displayed on this system. Playback is not possible. The sound skips. There is noise. A distorted sound is output. Transferring stops before it is finished. Continued l
OVER CURRENT appears.
A problem has been detected with the level of electrical current from the (USB) port. Turn off the system and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer.
There is no sound.
Send the audio files to the USB device again, as the audio files stored in the USB device may have been corrupted. The character codes that can be displayed by this system are numbers and alphabet only. Other characters are not displayed correctly.
The USB device is not recognized.
The USB device is not connected correctly. Turn off the system and reconnect the USB device, then turn on the system and check if USB MEMORY lights up in the display.
There is noise, skipping, or distorted sound.
Turn off the system and reconnect the USB device, then turn on the system. Connect the supported USB device (page 45). The USB device does not work properly. Refer to the USB device operation manual on how to deal with this problem.
Play does not start.
Turn off the system and reconnect the USB device, then turn on the system. The music data itself contains noise, or the sound is distorted. Noise may have entered during the transferring process. Delete the file, and try transferring again.
The USB device cannot be connected into the (USB) port.
Turn off the system and reconnect the USB device, then turn on the system. Connect the supported USB device (page 45). Press N (or NX on the unit) to start play.
Play does not start from the first file.
Set the play mode to normal play mode.
Audio file cannot be played back.
The USB device is being connected backwards. Connect the USB device in the correct orientation.
READING is displayed for an extended time, or it takes a long time before playback starts.
The reading process can take a long time in the following cases. There are many folders or files on the USB device. The file structure is extremely complex. The memory capacity is excessive. The internal memory is fragmented. Thus, we recommend following these guidelines. Total folders on USB device: 100 or less Total files per folder: 100 or less
MP3 files in MP3 PRO format cannot be played back. Some AAC files may not be played back correctly. WMA files in Windows Media Audio Lossless and Professional format cannot be played back. USB device formatted with file systems other than FAT16 or FAT32 (Cluster size 512 byte 32 kbyte) are unsupported.* If you use partitioned USB device, only audio files on the first partition can be played. Playback is possible up to 8 levels. The number of folders has exceeded 997.
The number of files in a folder has exceeded 999. Files that are encrypted or protected by passwords, etc. cannot be played back.
1 Select the AM band, and then turn
off the system.
2 While holding down ENTER, press
"/1. The system turns on automatically and AM 9K STEP or AM 10K STEP appears. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
To reset the system to factory settings
If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use the buttons on the unit for this operation.
1 Disconnect and reconnect the
power cord, and then turn on the system.
2 Press x, ENTER, and "/1 at the
same time. COLD RESET appears in the display. All user-configured settings, such as preset radio stations, timer, and the clock, are reset to factory setting.
DATA ERROR: You tried to play a file that is not playable. DEVICE ERROR: The USB device could not be recognized or an unknown device is connected (page 35).
DEVICE FULL: The memory of the USB device is full. FATAL ERROR: The USB device was removed during transferring or erase operation, and may have been damaged. FOLDER FULL: You cannot transfer onto the USB device because the number of folders have reached its maximum. NO STEP: All of the programmed steps have been erased. NO TRACK: No playable file is loaded in the system. NOT IN USE: You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED: An unsupported USB device is connected, or the USB device is connected to this system through a hub. OVER CURRENT: An over current was detected. PROTECTED: The USB device is writeprotected. PUSH STOP: You tried to perform an operation that can be performed only when the system is stopped. REC ERROR: Transferring did not start, stopped partway, or otherwise could not be performed (page 35). REMOVED: The USB device has been removed. STEP FULL: You tried to program more than 25 steps. TRACK FULL: You cannot transfer onto the USB device because the number of files have reached its maximum. USB READING: The system is reading information of the USB device. Some buttons are not available.
Discs that this system CAN play
AUDIO CD CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
CD-ROM CD-R/CD-RW other than those recorded in AUDIO CD format or MP3 format conforming to ISO 9660 Level 1/Level 2, Joliet in the expansion format CD-R/CD-RW recorded in multisession that have not ended by closing the session CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer-3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.
The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. AC power cord must be changed only at the qualified service shop.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.
To prevent a tape from being accidentally recorded over
Break off the tapes overwrite protection tab from side A or B as illustrated.
Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the unit, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.
MHC-GT555BP/MHC-GT555 Brazilian model only The following are measured at AC 127 or 220 V 50/60 Hz Front speaker RMS output power (reference): 150 W + 150 W (at 6 , 1 kHz, 10% THD) Subwoofer RMS output power (reference): 190 W (at 6 , 100 Hz, 10% THD) Other models The following are measured at AC 120, 127, 220, V 50/60 Hz Front speaker Power output (rated): 110 W + 110 W (at 6 , 1 kHz, 1% THD) RMS output power (reference): 200W + 200 W (per channel at 6 , 1 kHz, 10% THD) Subwoofer RMS output power (reference): 190 W (at 6 , 100 Hz, 10% THD)
MHC-GT111BP/MHC-GT111 Brazilian model only The following are measured at AC 127 or 220 V 50/60 Hz RMS output power (reference): 100 W + 100 W (at 6 , 1 kHz, 10% THD) Other models The following are measured at AC 120, 127, 220, 230 240V 50/60 Hz Power output (rated): 60 W + 60 W (at 6 , 1 kHz, 1% THD) RMS output power (reference): 100 W + 100 W (per channel at 6 , 1 kHz, 10% THD) LBT-ZT4 The following are measured at AC 120 V 60 Hz Front speaker RMS output power (reference): 180 W + 180 W (per channel at 6 , 1 kHz, 10% THD) Subwoofer RMS output power (reference): 180 W (at 6 , 100 Hz, 10% THD) Inputs AUDIO INPUT (LBT-ZT4 only): sensitivity 800 mV, impedance 47 kilohms AUDIO INPUT L/R (other models): voltage 250 mV, impedance 47 kilohms MIC: sensitivity 1 mV, impedance 10 kilohms (USB) port: Type A DMPORT (LBT-ZT4 only) Outputs PHONES: accepts headphones of 8 or more FRONT SPEAKER: accepts impedance of 6 SUBWOOFER (MHC-GT555BP/ MHC-GT555/MHC-GT444BP/ MHC-GT444/LBT-ZT4 only): accepts impedance of 6
Supported bit rate MP3 (MPEG 1 Audio Layer-3): kbps, VBR WMA: kbps, VBR AAC: kbps Sampling frequencies MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz WMA: 44.1 kHz AAC: 44.1 kHz Transfer speed Full-Speed Supported USB device Mass Storage Class Maximum current 500 mA
CD player section
System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6 W * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 88 dB
Tape deck section
Recording system: 4-track 2-channel, stereo
FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range: North American and Brazilian models: 87.5 108.0 MHz (100 kHz step) Other models: 87.5 108.0 MHz (50 kHz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10.7 MHz
Singer 5050 FX-95MS MC-806BLR GTX285-htdi-1GD3 MDS-SE9 2400MP Samsung S630 Joybee 150 MC-3080NW Inkjet 2300 GPS 500 Easy 270 MZ-E900 16589 W TWE-119D GA200 MM-N4 Dtca8 TX-P46s20E ZS-E5 CS-21M21ZQQ CD 950 CDX-525RF Xtreamer PRO Turntable Cdgt1 RDR-HX780 9200SE M15 HD DSC-H50 B Drive Fatal1TY-AA8XE EH-2511 CF 50 Cooker TCP50G25 PS50Q96HD ICF-C713 GR-S592GC CTK-480 Vp300 ICA-107W S7600 LAC-M8400R Celesta Software DTR-2 BQ-330 VSX-D511-K HR7774 Easycontrol 8 VRX8271 TX-P50x10Y CT-29Q12IP Dmczs6 Notebooks Urei 1603 372XP 32PW9309 KHM 10 Logicom FX40 PEG-T665C WD-1280FDI PT-LC75E Satellite L25 EMP-7700 Express SL-PS670A Leica R4S 5 1 DSC-HX5 R-408JW Rocz407 Aqua Plus DV-656A KD-SH707 ESQ-1 TX-SR404 RDR-HX1080 X-UN7 ML-1520P Aspire T620 DCR412W CVA-1000E Kxtg6441 DRU-530A DI9512 Spektrum DX6I Light 740 Live ASR-X PRO DVD729-001 WI 62 Macro DP-2010E KDL-40NX800 PT1800 Pro 76 Facile MDX-C5100
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101