Sony MHC-GTZ4, size: 2.0 MB
Here you can find all about Sony MHC-GTZ4 like manual and other informations. For example: review.
Sony MHC-GTZ4 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony MHC-GTZ4 please write about it to help other people.
[ Report abuse or wrong photo | Share your Sony MHC-GTZ4 photo ]
sony genezi mhc gtz4 i
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Mini HI-FI Component System
Operating Instructions MHC-GTZ5 MHC-GTZ4 / GTZ4i MHC-GTZ3 / GTZ3i MHC-GTZ2 / GTZ2i LBT-GTZ4i
2009 Sony Corporation
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. CAUTION The use of optical instruments with this product will increase eye hazard.
Notice for the customers in the United States Owners Record
The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.
Except for the customers in the United States
This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety Instructions
1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
Notice for customers: The following information is only applicable to equipment sold in countries applying EU Directives.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
The MHC-GTZ2 / GTZ2i consists of: Unit HCD-GTZ2 / GTZ2i Speaker System European model only Front speakers SS-GTZ3M Other models Front speakers SS-GTZ3 The LBT-GTZ4i consists of: Unit HCD-GTZ4i Speaker System Front speakers SS-GTZ4A Subwoofer SS-WGZ3A
Table of Contents
About this manual.6 Guide to parts and controls..8
Creating your own program. 33 Program Play Presetting radio stations. 34 Using the Radio Data System (RDS). 35 (European model only) Creating your own sound effect.. 35 Singing along.. 36 Using the Timers.. 36
Hooking up the system securely..14 Setting the clock..16
Playing an AUDIO CD/MP3 disc...17 Listening to the radio..19 Transferring onto an USB device..20 Listening to music of an USB device..25 Playing the iPod..28 (MHC-GTZ4i/GTZ3i/GTZ2i and LBT-GTZ4i only) Using optional audio components..30 Adjusting the sound.30 Changing the display.31
Troubleshooting. 39 Messages.. 45 Precautions.. 47 Specifications.. 48 Compatible USB devices with this system.. 52 Compatible iPod models with this system.. 54
Guide to parts and controls
This manual mainly explains operations using the unit, but the same operations can also be performed using the buttons on the remote having the same or similar names.
Unit Front view
1 wg wf wd ws wa 6
7 w; ql *qk qg qj
9 q; qa qs qd
* MHC-GTZ5, MHC-GTZ4 / GTZ4i, MHC-GTZ3 / GTZ3i and LBT-GTZ4i only.
1 "/1 (on/standby) (pages 16, 39, 45) Press to turn on the system. The STANDBY indicator lights up when the system is turned off. B Display (page 31) C REC TIMER (page 38) Press to set the Recording Timer. D PRESET EQ (pages 30, 35), GROOVE (page 30), SURROUND (page 30) Press to select a sound effect. EQ BAND (page 35) Press to select the frequency band. E MASTER VOLUME (pages 17, 25, 28, 30, 31, 39) Turn to adjust the volume. F +/ (select folder) (pages 17, 26) Press to select a folder. m/M (rewind/fast forward) (pages 17, 26) Hold down to find a point in a track or file. N (play) (pages 17, 25, 28, 33, 34, 40, 43) Press to start playback. X (pause) (pages 17, 26, 29) Press to pause playback. x (stop) (pages 17, 22, 26) Press to stop playback.
TUNING +/ (page 19) Press to tune in the station you want.
./> (go back/go forward) (pages 17, 26, 33) Press to select a track or file. G CD (pages 16, 17, 33) Press to select the CD function. TUNER/BAND (page 19) Press to select the TUNER function. Press to select the FM or AM band.
1 "/1 (on/standby) (page 16) Press to turn on the system. B EQ (page 30, 35) Press to select a preset EQ effect. C DISC SKIP/USB SELECT (pages 17, 27, 33) Press to select a disc. Press to select the USB device connected to the USB A or B port. D TIMER MENU (pages 16, 37, 38) Press to set the clock and the timers.
H FUNCTION +/ (pages 19, 22, 23, 25, 26, 30, 33) Press to select a function. I VOLUME +/* (pages 17, 19, 25, 28, 30, 37) Press to adjust the volume.
* The VOLUME + button has a tactile dot. Use the tactile dot as a reference when operating the system.
Remote RM-AMU053 (Other models)
qg qf qd qs
J O RETURN (pages 18, 26) Press to return to the parent folder. Press to exit search mode. Press to return to previous menu of the iPod. K TUNER MEMORY (page 34) Press to preset the radio station. L PLAY MODE/TUNING MODE (pages 19, 27, 33, 34) Press to select the play mode of an AUDIO CD, MP3 disc or an optional USB device. Press to select the tuning mode. M REPEAT/FM MODE (pages 17, 20, 26) Press to listen to a disc, an USB device, a single track or file repeatedly. Press to select the FM reception mode (monaural or stereo). N SLEEP (page 36) Press to set the Sleep Timer. O DISPLAY (pages 16, 31, 35, 39) Press to change the information on the display.
qa q; 8
1 "/1 (on/standby) (pages 16, 37) Press to turn on the system. B CLOCK/TIMER SELECT (pages 38, 45) CLOCK/TIMER SET (pages 16, 37) Press to set the clock and the timers. C REPEAT/FM MODE (pages 17, 20, 26) Press to listen to a disc, an USB device, a single track or file repeatedly. Press to select the FM reception mode (monaural or stereo).
D USB (pages 22, 23, 25, 26, 33) Press to select the USB function. CD (pages 16, 17, 33) Press to select the CD function. TUNER/BAND (page 19) Press to select the TUNER function. Press to select the FM or AM band. FUNCTION (pages 22, 30) Press to select a function. E./> (go back/go forward) (pages 16, 17, 26, 33, 37) Press to select a track or file. m/M (rewind/fast forward) (pages 17, 26) Press to find a point in a track or file. +/ (tuning) (page 19) Press to tune in the station you want. N (play) (pages 17, 25, 28, 33, 34, 40, 43) Press to start playback. X (pause) (pages 17, 26, 29) Press to pause playback. x (stop) (pages 17, 19, 22, 26) Press to stop playback. F ENTER (pages 16, 33, 37) Press to enter the settings. G DISC SKIP/USB SELECT (pages 17, 27, 33) Press to select a disc. Press to select the USB device connected to the USB A or B port.
H +/ (select folder) (pages 17, 26) Press to select a folder. I VOLUME +/* (pages 17, 19, 25, 28, 30, 37) Press to adjust the volume.
J EQ (page 30, 35) Press to select a preset EQ effect. K CLEAR (page 34) Press to delete the last step from the program list. L TUNER MEMORY (page 34) Press to preset the radio station. M PLAY MODE/TUNING MODE (pages 19, 27, 33, 34) Press to select the play mode of an AUDIO CD, MP3 disc or an optional USB device. Press to select the tuning mode. N DISPLAY (pages 16, 31, 35, 39) Press to change the information on the display. O SLEEP (page 36) Press to set the Sleep Timer.
GROOVE 3 REC ST AUTO TUNED
If TUNED does not light up and scanning does not stop, see To tune in a station with a weak signal below.
4 Press VOLUME +/ to adjust the
To stop automatic scanning
To tune in a station with a weak signal
Transferring onto an USB device
You can transfer music from a sound source to an optional USB device by connecting it to the B port on the unit. The audio format of files transferred by this system is MP3. For transferring from USB A to USB B you can also transfer WMA and AAC file. When transferring from audio files, the file size is the same as the original file. See Compatible USB devices with this system (page 52) for a list of USB devices that can be connected to this system. (MHC-GTZ4i / GTZ3i / GTZ2i and LBT-GTZ4i only) You cannot transfer the music to the iPod which is connected to the B port. USB transferring and erasing is disabled while the disc tray is open.
1 Press TUNING MODE repeatedly
until AUTO and PRESET disappear from the display.
2 Press +/ repeatedly to tune in the
station you want. You can also use TUNING +/ on the unit.
To reduce static noise on a weak FM stereo station
Press FM MODE on the remote repeatedly until MONO lights up in the display. There will be no stereo effect, but the reception will improve.
CD-USB Synchronized Transfer
You can easily transfer an entire disc onto an USB device.
1 Connect a transferable USB
device to the shown below. B port as
When the USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. Refer to the operating instructions supplied with the USB device to be connected for details on the operation method.
2 Press CD, then load the disc you
want to transfer.
3 Select the track or MP3 file you
want to transfer, then start play.
4 Press REC TO
USB while the selected track or MP3 file is being played back.
3 Press PLAY MODE on the
Playback a single Press REPEAT on the file repeatedly3) remote repeatedly (Repeat Play) during playback until REP 1 lights up in the display.
Select a folder
Select USB device
Press USB A to select the USB device which is connected to the A port. Press USB B to select the USB device which is connected to the B port. Press USB SELECT on the remote repeatedly to select the USB A or USB B which is connected to the A or B port.
1 USB SHUF* (Shuffle Play)
The audio files on the USB device you have selected in random order. The audio files in the folder on the USB device you have selected in random order. The tracks or files on all disc in the order you want them to be played back (see Creating your own program on (page 33).
SHUF* (Shuffle Play)
Switch to USB Press USB A or USB B function from (Automatic Source another source Selection). and start playback automatically
playing an VBR (variable bit rate) audio file, the system may resume playback from a different point. 2) When or SHUF is selected. 3) Playback repeatedly until you stop it.
Notes on the USB device
You cannot change the play mode during playback. Some time may be needed to start playback when: the folder structure is complex. the memory capacity is excessive. When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. Do not connect the system and the USB device through an USB hub. With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. This system does not necessarily support all the functions provided in a connected USB device. The playback order for the system may differ from the playback order of the connected digital music player. Be sure to turn off the system before removing the USB device. Removing the USB device while the system is turned on may corrupt the data on the USB device.
ALL USB (Normal Play) 1 USB (Normal Play)
The audio files on all USB devices in original order. The audio files on the USB device you have selected in original order. The audio files in the folder on the USB device you have selected in original order.
ALL USB SHUF* The audio files on all USB devices in random (Shuffle Play) order.
Pause playback Scroll up/down the iPod menus Choose the select item
Press X during playback. Press V/v repeatedly on the remote. Press ENTER (or b or on the remote).
B or X.m or >M
. or >
Select a track or Press.m or chapter of >M (or./> on audiobook/ the remote) repeatedly. podcast Fast forward or Hold down.m or fast rewind Play >M (or m/M on the remote) during playback, then release it at the point you want. Return to the previous menu item Press TOOL MENU or B or O RETURN on the remote. You can return to the previous menu or select a menu of the iPod. Note You can confirm menu and item selections on the iPod screen during operation.
TOOL MENU or MENU O RETURN or B on the remote ENTER (or on the remote) Center button.
Press and hold V or v on the remote has the similar function of turning the Click Wheel on the iPod clockwise or counterclockwise.
To use the system as a battery charger
You can use the system as a battery charger for the iPod when the system is on. The charging begins when the iPod is connected to the USB ports. The charging status appears in the iPod screen. For details, see the operating instructions of your iPod.
To stop charging the iPod
Remove the iPod. When the system is turned off, the charging is stopped.
Using optional audio components 1 Connect an optional audio
component to the PC IN L/R jacks using an audio cord (not supplied).
Adjusting the sound
To add a sound effect
2 Turn MASTER VOLUME (or
press VOLUME on the remote) to turn down the volume.
Reinforce the bass and create a more powerful sound Select the surround effect
Press GROOVE repeatedly until GROOVE1) or Z-GROOVE1) lights up in the display. Press SURROUND repeatedly until SURROUND lights up in the display. Press PRESET EQ (or EQ on the remote) repeatedly. To cancel, press PRESET EQ (or EQ on the remote) repeatedly until FLAT appears.
3 Press to select PC function.
Press FUNCTION (RM-AMU053) or FUNCTION +/ (RM-AMU054) repeatedly.
Select a preset sound effect
4 Start playing the connected
5 Turn MASTER VOLUME (or
Enhance the Press OPTIONS and turn sound quality of OPERATION DIAL to the audio file2) select MP3 BOOSTER+, then press ENTER. Turn OPERATION DIAL to select AUTO, then press ENTER.3)
The volume switches to power mode and the equalizer curve changes. 2) This feature is only available during USB and CD function. 3) BOOSTER lights up in the display when the MP3 BOOSTER+ effect is activated.
2 For audio files only
Turn OPERATION DIAL to select the folder you want, then press ENTER.
the track or file you want.
The program step number appear in the display.
1 Tune in the station you want
(see Listening to the radio (page 19)).
2 Press TUNER MEMORY.
A preset number flashes in the display. The stations are stored from preset number 1.
Cancel Program Play
When playback is stopped, press PLAY MODE on the remote repeatedly until PGM disappear from the display. Press CLEAR on the remote when playback is stopped.
Delete the last step from the program list Notes
3 Press +/ repeatedly to select
the preset number you want. If another station is already assigned to the selected preset number, the station is replaced by the new station.
(For CD function only) The program list is cleared when you eject the disc. (For USB function only) The program list is cleared when you: perform the erase operation. remove the USB device from the A port or B port. switch the USB memory select.
4 Press ENTER (RM-AMU053) or
(RM-AMU054). COMPLETE appears in the display. The station is stored.
5 Repeat steps 1 through 4 to
store other stations. You can preset up to 20 FM and 10 AM stations.
The program you made remains in the systems memory even after it has been played back. Press N to play back the same program again. If --.-- appears instead of the total playing time during programming, this means: the total playing time has exceeded 100 minutes. you have programmed an audio file. the current disc is DATA-CD or USB.
6 To call up a preset radio station,
press TUNING MODE repeatedly until PRESET lights up in the display, and then press +/ repeatedly to select the preset number you want.
Using the Radio Data System (RDS)
(European model only) What is the Radio Data System?
Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features such as station name. RDS is available only on FM stations.*
RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
Creating your own sound effect
You can raise or lower the levels of specific frequency ranges and then store up to the user equalizer in the memory.
1 Press EQ BAND repeatedly to
select a frequency band and then turn OPERATION DIAL to adjust the equalizer level. Repeat this for each band you want to adjust.
REC ST AUTO TUNED
2 Press ENTER (RM-AMU053) or
(RM-AMU054). USER EQ appears and the setting is stored in the memory.
Receiving RDS broadcasts
Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display.
To call up the user equalizer setting
Press PRESET EQ (or EQ on the remote) repeatedly until USER EQ appears.
To cancel the sound effect
Press PRESET EQ (or EQ on the remote) repeatedly until FLAT appears.
To check the RDS information
While receiving an RDS station, press DISPLAY repeatedly. RDS information appears on the display.
You can sing along with any audio source that play back on this system.
Using the Timers
The system offers three timer functions. You cannot activate both the Play Timer and the Recording Timer at the same time. If you use either with the Sleep Timer, the Sleep Timer has priority.
1 Turn MIC LEVEL to MIN to turn
down the microphone volume level.
2 Connect an optional microphone
to the MIC jack on the unit.
You can fall asleep to music. This function works even if the clock is not set. Press SLEEP on the remote repeatedly.
3 Start playing the music. 4 Turn MIC LEVEL to adjust the
microphone volume. If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone. After you have finished, disconnect the microphone from the MIC jack on the unit.
Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: 90MIN t 80MIN t 70MIN t t 10MIN t OFF
Check the remaining time
Press SLEEP once.
Change the time to Press SLEEP repeatedly turn off to select the time you want. Cancel the Sleep Timer Press SLEEP repeatedly until SLEEP OFF appears in the display.
OVER CURRENT appears.
You are using an unsupported USB device. See Compatible USB devices with this system (page 52) for the supported device types. The USB device was disconnected or the power was turned off during transferring. Delete the partiallytransferred file, and transfer again. If this does not fix the problem, the USB device may be broken. Refer to the USB device operating instruction on how to deal with this problem. Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again.
Audio files or folders on the USB device cannot be erased.
A problem has been detected with the level of electrical current from the A port or B port. Turn off the system and remove the USB device from the A port or B port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer.
The USB device is not connected correctly. Turn off the system and reconnect the USB device, then turn on the system and check if USB A or USB B lights up in the display.
There is noise, skipping, or distorted sound.
Check if the USB device is writeprotected. The USB device was disconnected or the power was turned off during the erase operation. Delete the partiallyerased file. If this does not fix the problem, the USB device may be broken. Refer to the USB device operating instruction on how to deal with this problem.
Are you using a supported USB device?
Turn off the system and reconnect the USB device, then turn on the system. The music data itself contains noise, or the sound is distorted. Noise may have entered during the transferring process. Delete the file, and try transferring again.
The USB device cannot be connected into the A port or B port.
The USB device is being connected backwards. Connect the USB device in the correct orientation.
If you connect an unsupported USB device, the following problems may occur. See Compatible USB devices with this system (page 52) for the supported device types. The USB device is not recognized. File or folder names are not displayed on this system. Playback is not possible. The sound skips. There is noise. A distorted sound is output. Transferring stops before it is finished.
READING is displayed for an extended time, or it takes a long time before playback starts.
Play does not start from the first file.
Set the play mode to normal play mode.
Audio file cannot be played back.
The reading process can take a long time in the following cases. There are many folders or files on the USB device. The file structure is extremely complex. The memory capacity is excessive. The internal memory is fragmented. Thus, we recommend following these guidelines. Total folders on USB device: 1000 or less Total files per folder: 150 or less Total files on USB device: 3000 or less
The data stored in the USB device may have been corrupted, perform the transferring again. The character code that can be displayed by this system are as follows: Upper cases (A to Z) Numbers (0 to 9) Symbols (< > * +, ? / [ ] \ _) Other characters may not be displayed correctly.
The USB device is not recognized.
MP3 files in MP3 PRO format cannot be played back. Some AAC files may not be played back correctly. WMA files in Windows Media Audio Lossless and Professional format cannot be played back. USB device formatted with file systems other than FAT16 or FAT32 are unsupported.* In case multiple partitions exist in USB device that is being used, files may not be played. Playback is possible up to 8 levels. The number of folders has exceeded 1000. The number of files in a folder has exceeded 150. The number of files in a USB device has exceeded 3000. Files that are encrypted or protected by passwords, etc. cannot be played back.
* This system supports FAT16 and FAT32, but some USB device may not support all of these FAT. For details, refer to the operating instruction of each USB device or contact the manufacturer.
Turn off the system and reconnect the USB device, then turn on the system. Connect the supported USB device (page 52). The USB device does not work properly. Refer to the USB device operating instruction on how to deal with this problem.
Play does not start.
Turn off the system and reconnect the USB device, then turn on the system. Connect the supported USB device (page 52). Press N to start play.
Make sure the iPod is connected securely. Make sure the iPod is playing music. Adjust the volume. Depending on the contents of the iPod, it may take time to start playback. You are using an unsupported iPod. See Compatible iPod models with this system (page 54) for the supported device types.
The sound is distorted.
Meter display is turned off.
Reduce the volume. Set the EQ setting of the iPod to Off or Flat.
The iPod can not be charged.
Make sure the iPod is connected securely.
MTR POINTER and M-BACKLIGHT are set to OFF in the OPTIONS menu. Select other settings. Meter mode is set to METER OFF. Press METER MODE on the unit repeatedly to select other modes.
1 Select the AM band, and then turn
off the system.
2 While holding down ENTER, press
"/1. The system turns on automatically and AM 9K STEP or AM 10K STEP appears. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
To reset the system to factory settings
If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode.
1 Disconnect and reconnect the
power cord, and then turn on the system.
2 Press x, ENTER, and "/1 at the
same time. COLD RESET appears in the display. All user-configured settings, such as preset radio stations, timer, and the clock, are reset to factory setting.
DATA ERROR: You tried to play a file that is not playable. DEVICE ERROR: The USB device could not be recognized or an unknown device is connected (page 42). DEVICE FULL: The memory of the USB device is full. FATAL ERROR: The USB device was removed during transferring or erase operation, and may have been damaged. FOLDER FULL: You cannot transfer onto the USB device because the number of folders have reached its maximum. NO DEVICE: The USB device is not connected. NO MEMORY: External device is not inserted in mobile phone. NO STEP: All of the programmed steps have been erased. NO TRACK: No playable file is loaded in the system. NOT IN USE: You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED: An unsupported USB device is connected, or the USB device is connected to this system through a hub.
OVER CURRENT: An over current was detected. PROTECTED: The USB device is writeprotected. PUSH STOP: You tried to perform an operation that can be performed only when the system is stopped. READING: The system is reading information of the USB device. Some buttons are not available. REC ERROR: Transferring did not start, stopped partway, or otherwise could not be performed (page 41). STEP FULL: You tried to program more than 25 steps. TRACK FULL: You cannot transfer onto the USB device because the number of files have reached its maximum.
Discs that this system CAN play
AUDIO CD CD-R/CD-RW (audio data/MP3 files)
Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. AC power cord must be changed only at the qualified service shop.
Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the unit, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.
WF8508NMW8 Fishmark 320 FC6842 01 EHD60020P 82P L14820 M5025 MFP Us950 AG-EZ1 WT1485CW DMR-HS2 ORA-ITO C6112 SGH-I640V EW1220N 32FD9944 01S FC9171 CPJ-100 SC91840-6I Sound DS24 HT-DDW760 SGH-Z500V Bluechart 249RP-PS Digimax 202 DC-300A II VR1000 DVD-SH897 MDP 1600 Rayline TA6 Computer 28161 Chronicles Sup 012R AVR-4310ciavc-4310 KR-V8090 KDC-X491 HCD-CP11 Fujifilm A180 BH-905 RDA-7 1 ALL-IN-ONE LW22N23N Easyshare C875 Cinema V10 IC-2100-T Quadra ETH-305 TX-SE500 Nikon Scan P5B-E M 201 TT 6044 CP-X445W DP4700 Crossover GPS VGN-FZ21M Inkjet 2600 DTB-21S6 YDP-131-YDP-213 PSC 2175 Navigon 1400 Review ML-1910 TXP42S10E SGH-T201G VC6200 Gr-dv500 DMC-FX33 Peugeot 607 Q1245V T5500 F40760 HK695 Lrbn20514ST HT362ST Combo MX310 F900B-fb990g-ul- Pilot MS-3443A Alcatel-lucent 4003 Yamaha WX7 BT530 DP6850- Drive N800C Enchante Macro AVR 80 NV-DS30EG GP120CE Strip 20DMO Removal Tool DW333K LE-40R81B Motorola 66 Nikon F75 Z800EXR Infiniti I30 Control
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101