Reviews & Opinions
Independent and trusted. Read before buy Sony MHC-RG295!

Sony MHC-RG295

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony MHC-RG295, size: 990 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony MHC-RG295About Sony MHC-RG295
Here you can find all about Sony MHC-RG295 like manual and other informations. For example: review.

Sony MHC-RG295 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony MHC-RG295 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony MHC-RG295 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
scottjumps 11:47am on Thursday, April 15th, 2010 
We are very pleased with our new equipment, it replaces a unit that although old now cost twice as much money when purchased. good volume and noise. Very good value for money. Quite big and heavy
labello 7:44pm on Thursday, April 8th, 2010 
Disappointed As a woman living alone, I bought this, and was so pleased with myself that I put it together and got it to work - however. Disappointed As a woman living alone, I bought this, and was so pleased with myself that I put it together and got it to work - however.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

2-899-690-14 (1)
Mini Hi-Fi Component System

Operating Instructions

MHC-RG595/RG495/RG295

2007 Sony Corporation

WARNING
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
To prevent re, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And dont place lighted candles on the apparatus. To prevent re or shock hazard, do not place objects lled with liquids, such as vases, on the apparatus. Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. Do not install the appliance in a conned space, such as a bookcase or built-in cabinet. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, re or the like. This appliance is classied as a CLASS 1 LASER product. This marking is located on the rear exterior. Dont throw away the battery with general house waste, dispose of it correctly as chemical waste.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Ofce, your household waste disposal service or the shop where you purchased the product. Applicable accessories: Remote commander The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelnger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is tted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362, (i.e., marked with or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
Note on power cord plug shapes (Saudi Arabian model only)
For AC 220 V wall sockets:
1 Make the appropriate voltage setting
on the system. (only for models with a voltage selector) BF) is securely attached to the power cord. (The 13 A 3-pin plug is attached when shipped from the factory.)
2 Make sure that the 13 A 3-pin plug (Type
For AC 127 V wall sockets:
1 Make the appropriate voltage setting 2 Remove the 13 A 3-pin plug using a

screwdriver.

on the system. (only for models with a voltage selector)
3 Attach the supplied parallel blade plug

(Type A).

Table of Contents
Guide to parts and controls.. 5

Others

Troubleshooting. 21 Messages.. 23 Precautions.. 24 Specications.. 26

Getting Started

Hooking up the system securely. 8 Setting the clock.. 10

Basic Operations

Playing a CD/MP3 disc.. 11 Listening to the radio.. 12 Playing a tape.. 13 Using optional audio components. 14 Adjusting the sound.. 14 Changing the display.. 15

AUDIO IN jack (page 14)

Connect to an audio component.
Unit: VOLUME control (page 11, 12, 13, 14)
Turn to adjust the volume.
(stop) button (page 11, 12, 13)

Press to stop playback.

/ (go back/go forward) button (page 11)
Press to select a track or le.
Remote: VOLUME +/ button (page 11, 12, 13, 14)
Press to adjust the volume.

EQ BAND button (page 19)

Press to select the frequency band.
Unit: TUNING +/ button (page 12) Remote: +/ (tuning) button (page 12)
Press to tune in the desired station.
ENTER button (page 10, 16, 17, 20)
Press to enter the settings.
Sound buttons (page 14, 19) Unit: GROOVE button, SURROUND button Remote: EQ button
Press to select the sound.
REPEAT/FM MODE button (page 11, 12)
Press to listen to a disc, a single track or le repeatedly. Press to select the FM reception mode (monaural or stereo).
(open/close) button (page 11)
Press to insert and eject a disc.
Battery compartment lid (page 10) CLEAR button (page 16)
Press to delete a pre-programmed track.

DISC button (page 11)

Press to select a disc. Press to switch to the CD function from other function.
Unit: DISC SKIP/EX-CHANGE button (page 11)
Press to select a disc. Press to exchange a disc while playing.
TUNER MEMORY button (page 17)
Press to preset the radio station.
Remote: DISC SKIP button (page 11)

Press to select a disc.

PLAY MODE/TUNING MODE button (page 11, 12, 13)
Press to select the play mode of a CD, MP3 or tape. Press to select the tuning mode.
Remote sensor (page 21) CLOCK/TIMER SELECT button (page 20) CLOCK/TIMER SET button (page 10, 19)
Press to set the clock and the timers.

SLEEP button (page 19)

Press to set the Sleep Timer.
Hooking up the system securely
When carrying this system
1 Remove all discs to protect the CD mechanism. 2 Press CD to select the CD function. 3 Hold down on the unit, and press / on
the unit until STANDBY appears.

AM loop antenna

4 After LOCK appears, unplug the power cord.
Subwoofer (MHC-RG595/RG495 only)
Place the subwoofer vertically to obtain a better bass reproduction. Also, position the subwoofer: on a solid oor where resonance is unlikely to occur. at least a few centimeters away from the wall. away from the center of the room or place a bookshelf against a wall, to avoid generating a standing wave.

FM lead antenna (Extend it horizontally.) or Brown side for other regions White side for North American model Solid (Red/)

Speakers and subwoofer

Attach the supplied speaker pads to the bottom of the front speakers and subwoofer to prevent slipping. Front speaker for all models, Subwoofer for MHC-RG495
Subwoofer Striped (Black/)

Front speaker (right)

Subwoofer for MHC-RG595

Solid (Red/)

Antennas
Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords to avoid picking up noise.
Insert only the stripped portion of the cord.
Striped (Black/) Front speaker (left)
For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Connect the power cord to a wall socket. The demonstration appears in the display. If the plug does not t the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).

* Saudi Arabian model: V

Wall socket

To use the remote

Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side rst, matching the polarities shown below.
Setting the clock 1 Press / (on/standby) to turn

on the system.

With normal use, the batteries should last for about six months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion.

Press CLOCK/TIMER SET.

If the current mode appears on the display, press / repeatedly to select CLOCK SET and then press ENTER.
Press / repeatedly to set the hour, and then press ENTER. Use the same procedure to set the minutes.
When you turn off the system after setting the clock, the clock display appears instead of the demonstration display. The clock settings are lost when you disconnect the power cord or if a power failure occurs.

Other operation

To Pause playback Press (or on the unit). To resume play, press the button again. . +/. / (or turn the MULTI JOG dial on the unit).

Playing a CD/MP3 disc 1 Select the CD function.

Press CD.

Stop playback Select a folder on an MP3 disc Select a track or le

Place a disc.

Press on the unit, and place a disc with the label side up on the disc tray.
To insert additional discs, press DISC SKIP to rotate the disc tray. To close the disc tray, press on the unit again. Do not force the disc tray closed with your nger, as this may damage the unit.

Start playback.

Press (or on the unit).

Adjust the volume.

Press VOLUME +/ (or turn the VOLUME control on the unit).
Find a point in a Hold down / track or le during playback, and release the button at the desired point. Select Repeat REPEAT repeatedly Play until REP or REP1 appears. Select a disc DISC SKIP (or DISC on the unit) in stop mode. Switch to CD DISC on the function from unit (Automatic Source other function Selection). Exchange other EX-CHANGE on the discs while unit. playing

To change the play mode

Press PLAY MODE repeatedly while the player is stopped. You can select normal play (ALL DISCS for all discs or 1 DISC for a disc or * for all MP3 les in the folder on the disc), shufe play (ALL DISCS SHUF or 1 DISC SHUF or SHUF*), or program play (PGM).
* When playing a CD-DA disc, (SHUF) Play performs the same operation as 1 DISC (SHUF) Play.

Notes on Repeat Play

All tracks or les on a disc are played repeatedly up to ve times. You cannot select REP and ALL DISCS SHUF at the same time. REP1 indicates that a single track or le is repeated until you stop it.
Listening to the radio 1 Select FM or AM.
Press TUNER/BAND repeatedly.
Notes on playing MP3 discs
Do not save other types of les or unnecessary folders on a disc that has MP3 les. Folders that have no MP3 les are skipped. MP3 les are played back in the order that they are recorded onto the disc. The system can only play MP3 les that have a le extension of.MP3. If there are les on the disc that have the.MP3 le extension, but that are not MP3 les, the unit may produce noise or may malfunction. The maximum number of: folders is 150 (including the root folder). MP3 les is 255. MP3 les and folders that can be contained on a single disc is 300. folder levels (the tree structure of les) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all.

Select the tuning mode.

Press TUNING MODE repeatedly until AUTO appears.
Tune in the desired station.
Press +/ (or TUNING +/ on the unit). Scanning stops automatically when a station is tuned in, and then TUNED and STEREO (for stereo programs) appear. When you tune in a station that provides RDS services, the station name appears on the display (European model only).
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. A disc with a mixed CD format is recognized as a CDDA (audio) disc.
To stop automatic scanning

Press .

To tune in a station with a weak signal
If TUNED does not appear and the scanning does not stop, press TUNING MODE repeatedly until AUTO and PRESET disappear, and then press +/ (or TUNING +/ on the unit) repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo station
Press FM MODE repeatedly until MONO appears to turn off stereo reception.
Playing a tape 1 Select a tape deck. 2

Insert a tape.

To Pause playback Press (or on the unit). To resume play, press the button again. . /. PLAY MODE repeatedly until RELAY appears.
Press TAPE (or TAPE A/B on the unit) repeatedly. Press PUSH on the unit, and insert the TYPE I (normal) tape into the cassette holder with the side you want to play facing forward. Make sure there is no slack in the tape to avoid damaging the tape or the tape deck. Press PUSH on the unit again to close the cassette holder.
Stop playback Rewind or fast forward Select Relay Play*
* After the playback of the front side of deck A, deck B plays the front side, and then stops.
Press (or on the unit). Do not eject the tape during playback or recording, as this may cause irreparable damage to the tape and cassette holder.
Using optional audio components 1 Connect additional audio 4 5

Adjusting the sound

To add a sound effect
To Reinforce the bass and create a more powerful sound Set the surround effect Press GROOVE on the unit repeatedly until GROOVE appears. SURROUND on the unit repeatedly until SURR appears.
component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Turn down the volume.
Press VOLUME (or turn the VOLUME control on the unit towards ).
Select the AUDIO IN function.
Press AUDIO IN on the unit.
Start playing the connected component. Adjust the volume.
Select the preset EQ repeatedly. To sound effect cancel, press EQ repeatedly until EQ OFF appears.
To turn on the subwoofer (MHC-RG595/ RG495 only)
Press SUBWOOFER on the unit repeatedly until SUB ON appears. The SUBWOOFER indicator on the unit lights up. If you later disconnect the subwoofer, repeat the procedure until SUB OFF appears. The volume of the subwoofer is linked to the front speakers.

Changing the display

To Change the illumination pattern around the VOLUME control Change information on the display* Change Display mode (See below.) Press ILLUMINATION on the unit repeatedly.
Notes on the display information
The following are not displayed; total playing time for a CD-DA disc depending on the play mode. total playing time for an MP3 disc. remaining playing time for an MP3 le. The following are not displayed correctly; elapsed playing time of an MP3 le encoded using a VBR (variable bit rate). folder and le names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. The following are displayed; ID3 tag information for MP3 les when ID3 version 1 and version 2 tags are used. up to 30 characters of ID3 tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols ( $ % ( ) * , . / < = > @ [ \ ] _ ` { | } ! ? ^).
DISPLAY repeatedly when the system is turned on. DISPLAY repeatedly when the system is turned off.
* For example, you can view CD/MP3 disc information, such as the track or le number or folder name during normal play, or the total playing time while the player is stopped.
The system offers the following display modes. Display mode Demonstration When the system is off1), The clock display is replaced by lighting and ashing of the display window. The clock is displayed. The display is turned off to conserve power. The timer and clock continue to operate.
Clock Power Saving Mode2)
The STANDBY indicator on the unit lights up when the system is off. When the system is in Power Saving Mode, the following functions are unavailable: setting the clock. changing the AM tuning interval (except for European and Saudi Arabian models). turning on the system by pressing the function buttons (for example, CD ). changing the CD power manage function. resetting the system to factory settings.
Creating your own CD program

(Program Play)

Use buttons on the remote to create your own program.
Repeat steps 3 through 5 to program additional tracks or les, up to a total of 25 tracks or les. To play your program of tracks or les, press .
The program remains available until you open the disc tray. To play the same program again, press .

To cancel Program Play

Press CD to select the CD function. Press PLAY MODE repeatedly until PGM appears while the player is stopped. Press DISC SKIP repeatedly to select a disc. Press / repeatedly until the desired track number appears.
When programming MP3 les, press +/ repeatedly to select the desired folder, and then select the desired le.
Press PLAY MODE repeatedly until PGM disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR while the player is stopped.

For Manual Recording:

Load a recordable tape into deck B with the side you want to record facing forward, and then press TAPE A/B repeatedly to select TAPE B. Prepare the recording source.
For CD Synchro Recording: Press CD to select the CD function.
Press REC PAUSE/START , and then start playing the desired recording source. If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise.

To stop recording

Press . Notes
Recording stops if you change to a different function. You cannot eject the disc during CD Synchro Recording.
Load the disc you want to record, and press DISC SKIP repeatedly to select the disc. When recording a folder from an MP3 disc, press PLAY MODE on the remote repeatedly to select , and then press +/ repeatedly to select the desired folder. To record only your favorite CD tracks or MP3 les in your desired order, perform steps 2 to 6 of Creating your own CD program (page 16).
Select the desired source to record.
Creating your own sound effect
You can raise or lower the levels of specic frequency ranges, and then store the setting as USER in the memory.

Using the Timers

The system offers three timer functions. You cannot activate both the Play Timer and the Rec Timer at the same time. If you use either with the Sleep Timer, the Sleep Timer has priority. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select AUTO, the system automatically turns off after the current disc or tape stops or in 100 minutes. Do not select AUTO during Synchro Recording of a tape. Play Timer: You can wake up to CD, tape or tuner at a preset time.
Select the audio emphasis you want for your basic sound using EQ, and SURROUND and GROOVE on the unit. Press EQ BAND repeatedly to select a frequency band, and then turn the MULTI JOG dial on the unit to adjust the frequency level. Repeat this for each band you want to adjust.
Frequency band Frequency level
Rec Timer: You can record a preset radio station at a specied time. Use buttons on the remote to control the Play Timer and the Rec Timer. Make sure you have set the clock.

Hold down EQ until COMPLETE appears.
The setting is stored in the memory.
Prepare the sound source.
Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specic CD track or MP3 le, create your own program (page 16).

Play Timer

To call up the personal sound effect, press EQ repeatedly until USER appears.

Rec Timer

To cancel the sound effect
Tune in the preset radio station (page 17).
Press EQ repeatedly until EQ OFF appears.
Press / repeatedly to select PLAY SET or REC SET, and then press ENTER.
ON appears, and the hour indication ashes.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press / repeatedly until PLAY SELECT or REC SELECT appears, and then press ENTER.
Set the time to start playing or recording.

To cancel the timer

Press / repeatedly to set the hour, and then press ENTER. The minute indication ashes. Use the procedure above to set the minutes.
Repeat the same procedure as above until TIMER OFF appears, and then press ENTER.

To change the setting

Start over from step 1. Tips
The Play Timer setting remains as long as the setting is not canceled manually. The volume is reduced to minimum during the Rec Timer. The Rec Timer is canceled automatically after the Rec Timer has been activated.
Use the same procedure as in step 4 to set the time to stop playing or recording. Select the sound source or prepare the tape.
Press / repeatedly until the desired sound source appears, and then press ENTER. The display shows the timer settings.
Load a recordable tape into deck B. The display shows the timer settings.
Press / to turn off the system.
The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer and the Rec Timer will not play or record.

Troubleshooting

1 Make sure the power cord and speaker
cords are correctly and rmly connected. and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer.
The remote does not function. Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from uorescent lights. Point the remote at the systems sensor. Move the remote closer to the system.
2 Find your problem in the checklist below,

CD/MP3 player

The sound skips, or the disc will not play. Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the rst track. Press PLAY MODE repeatedly until both PGM and SHUF disappear to return to normal play.
If the STANDBY indicator ashes Immediately unplug the power cord, and check the following item. If your system has a voltage selector, is the voltage selector set to the correct voltage? Are the + and speaker cords shortcircuited? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the back of the system? After the STANDBY indicator stops ashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer.

General

The display starts ashing as soon as you plug in the power cord even though you have not turned on the system. Press DISPLAY twice while the system is off. The demonstration disappears. Sound comes from one channel, or the left and right volumes are unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. Sound lacks bass. Check that the striped (or solid) cord is connected to the speakers (or +) jack correctly. Severe hum or noise. Move the system away from sources of noise. Connect the system to a different wall socket. Install a noise lter (available separately) to the power cord.
Starting playback takes more time than usual. The following discs take a longer time to start playback.
a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been nalized (a disc to which data can be added). a disc that has many folders.
Severe hum or noise, or stations cannot be received. (TUNED or STEREO ashes on the display.) Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. Connect a commercially available external antenna. Turn off nearby electrical equipment.

Tape deck

The sound exhibits excessive wow or utter or dropout. Clean the capstans and pinch rollers. Also, clean and demagnetize the tape heads. See Precautions for details (page 24).
To reset the system to factory settings
If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use buttons on the unit to reset the system to its factory default settings.
To change the AM tuning interval
1 Disconnect and reconnect the power
cord, and then turn on the system.

Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/MP3 les) Discs that this system CANNOT play CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet or multisession CD-R/CD-RW recorded in multisession that have not ended by closing the session CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is nalized incorrectly Discs containing les other than MPEG 1 Audio Layer-3 (MP3) les Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Notes on discs Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.
On safety The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualied personnel before operating it again. AC power cord must be changed only at the qualied service shop. On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.

Other models: MHC-RG495 The following are measured at AC 120, 127, 220, 240 V 50/60 Hz Front speaker Power output (rated): 95 W + 95 W (at 6 , 1 kHz, 1% THD) RMS output power (reference): 155 W + 155 W (per channel at 6 , 1 kHz, 10% THD) Subwoofer RMS output power (reference): 155 W (at 6 , 80 Hz, 10% THD) MHC-RG295 The following are measured at AC 120, 127, 220, 240 V 50/60 Hz Power output (rated): 95 W + 95 W (at 6 , 1 kHz, 1% THD) RMS output power (reference): 155 W + 155 W (per channel at 6 , 1 kHz, 10% THD) Inputs: AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms Outputs: PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms SUBWOOFER OUT (MHC-RG595/ RG495 only): accepts impedance of 6 to 16 ohms

CD player section

System: Compact disc and digital audio system Laser: Semiconductor laser (=790 nm) Emission duration: continuous Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB

Tape deck section

Recording system: 4-track 2-channel, stereo Frequency response: 50 13,000 Hz (3 dB), using Sony TYPE I cassettes Wow and utter: 0.15% W. Peak (IEC), 0.1% W. RMS (NAB), 0.2% W. Peak (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner FM tuner section: Tuning range: 87.5 108.0 MHz (50 kHz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10.7 MHz AM tuner section: Tuning range European and Saudi Arabian models: 531 1,602 kHz (with 9 kHz tuning interval) Other models: 530 1,710 kHz (with 10 kHz tuning interval) 531 1,602 kHz (with 9 kHz tuning interval) Antenna: AM loop antenna, external antenna terminal Intermediate frequency: 450 kHz

Speaker

European model: MHC-RG595 Front speaker SS-RG595 for MHC-RG595 Speaker system: 3-way, 3-unit, bass-reex type Speaker units: Subwoofer 13 cm, cone type, Woofer 13 cm, cone type, Tweeter 5 cm, horn type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 235 mm Mass: Approx. 3.8 kg net per speaker Subwoofer SS-WG595 for MHC-RG595 Speaker system: Dual cone type Speaker units: Woofer 20 cm, cone type, Passive radiator 25 cm Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 330 mm Mass: Approx. 7.2 kg
MHC-RG495 Front speaker SS-RG595 for MHC-RG495 Speaker system: 3-way, 3-unit, bass-reex type Speaker units: Subwoofer 13 cm, cone type, Woofer 13 cm, cone type, Tweeter 5 cm, horn type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 235 mm Mass: Approx. 3.8 kg net per speaker Subwoofer SS-WG495 for MHC-RG495 Speaker system: Bass-reex type Speaker units: Woofer 20 cm, cone type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 325 mm Mass: Approx. 5.8 kg MHC-RG295 Front speaker SS-RG595/SS-RG295* for MHCRG295 (* UK model only) Speaker system: 3-way, 3-unit, bass-reex type Speaker units: Subwoofer 13 cm, cone type, Woofer 13 cm, cone type, Tweeter 5 cm, horn type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 235 mm Mass: Approx. 3.8 kg net per speaker Other models: MHC-RG495 Front speaker SS-RG495A for MHC-RG495 Speaker system: 3-way, 3-unit, bass-reex type Speaker units: Subwoofer 13 cm, cone type, Woofer 13 cm, cone type, Tweeter 5 cm, horn type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 235 mm Mass: Approx. 3.8 kg net per speaker Subwoofer SS-WG495A for MHC-RG495 Speaker system: Bass-reex type Speaker units: Woofer 20 cm, cone type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 325 mm Mass: Approx. 5.8 kg

MHC-RG295 Front speaker SS-RG495A for MHC-RG295 Speaker system: 3-way, 3-unit, bass-reex type Speaker units: Subwoofer 13 cm, cone type, Woofer 13 cm, cone type, Tweeter 5 cm, horn type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 235 mm Mass: Approx. 3.8 kg net per speaker
Mass (excl. speakers) European model: MHC-RG595: Approx. 9.5 kg MHC-RG495: Approx. 9.5 kg MHC-RG295: Approx. 9.3 kg Other models: MHC-RG495: Approx. 9.5 kg MHC-RG295: Approx. 9.3 kg Supplied accessories: Remote Commander (1), R6 (Size AA) batteries (2), AM loop antenna (1), FM lead antenna (1), Speaker pads MHC-RG595/ RG495 (12), MHC-RG295 (8) Design and specications are subject to change without notice.
Standby power consumption: 0.5 W Halogenated ame retardants are not used in the certain printed wiring boards. Halogenated ame retardants are not used in cabinets.
Power requirements European model: AC 230 V, 50/60 Hz Australian model: AC V, 50/60 Hz Saudi Arabian model: AC 120 127, 220 or V, 50/60 Hz, Adjustable with voltage selector Other models: AC 120, 220 or V, 50/60 Hz, Adjustable with voltage selector Power consumption European model: MHC-RG595: 205 watts 0.5 W (in Power Saving Mode) MHC-RG495: 245 watts 0.5 W (in Power Saving Mode) MHC-RG295: 185 watts 0.5 W (in Power Saving Mode) Other models: MHC-RG495: 245 watts 0.5 W (in Power Saving Mode) MHC-RG295: 200 watts 0.5 W (in Power Saving Mode) Dimensions (w/h/d) (excl. speakers): Approx. 412.3 mm

Printed in China

 

Tags

E5945B NV-MX5 Fire-30 47LH3000 LQ-2680K GX212 B89090-5 GR-D270 NV-VJ62PN RE-39NZ43RB Polaroid A930 TS-W1201C IC-U82 V9 ZW5000Y8 DPF-D75 WD-80150TUP AW2092F-1 PCG-R505JSK Absynth 5 5970 VFD Juno-stage GC4422 Ryobi 990R RP-54NA20P FOR Xbox 10330 PLC-SU32 Samsung L878 Review X5075 Argos Kdsh1000E-KD-sh1000 VSA-D802S I915GAE MZ-RH910 X-700 HT-C9950W W6400 VGN-SZ330p-B Singer 97-2 Zoom 607 Dect 221 GXT600 Matrix 12 YST-SW90 DVD4000 OHM120-224602A EWR10D5 Nokia 1662 Silhouette 1994 HMD-A230 AOC IF23 PRO 8100 F19424 KEH-P3600R YP-T5H DEH-P2600R Deere 9030 Imagerunner 2520 KDC-7027 BHF1000 SMW 5020 SMV63M00 MS-6570E TH-42PZ85B Shutter Lens 1150C KDC-BT40U 5008MG 29DH55N Nav III LA26C450e1M D-fire 01 KX-TG5776 SW65ASP DNX5260BT EUR7702110 32PW9767 12 PCG-F250 XVM-F65WL M2R32-MVP MHC-GRX5 Pentax KM WF203ANS Converter SM-352B B20CS50SNW NP-N220 Plantronics K100 Yellow ZWS2125W KDL-32BX300 Discovery 640 Generation PTS 10 LQ-680 2 7 P-304 LCD2010X VGN-A517B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101