Sony MHC-RXD5 Manual
Sony MHC-RXD5, size: 794 KB
Sony MHC-RXD5 Annexe 2
Sony MHC-RXD5 Annexe 1
Sony MHC-RXD5 Annexe 3
Here you can find all about Sony MHC-RXD5 like manual and other informations. For example: review.
Sony MHC-RXD5 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony MHC-RXD5 please write about it to help other people. [ Report abuse or wrong photo | Share your Sony MHC-RXD5 photo ]
Wie a Sony MHC RXD5 (part 2)
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Deck B stands by for recording.
If you want to record from the reverse side, press TAPE B 9 to light its indicator after pressing REC PAUSE/START in step 4. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. To record non-preset stations, use + and in step 2 to tune in the desired station manually. When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that DOLBY NR appears after pressing REC PAUSE/START in step 4. If noise is heard while recording from the radio, move the respective antenna to reduce the noise.
p =+ 0) DECK A ( DECK B (
Playing a tape (continued)
Pressing TAPE A (or TAPE B) ( or 9 when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) ( or 9 (Automatic Source Selection). When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that DOLBY NR appears.
Press 6 and insert a recorded tape in deck A or B.
With the side you want to play facing forward
Press DIRECTION repeatedly to select A to play one side. Select * to play both sides.
To play both decks in succession, select RELAY (relay play).**
Searching for the beginning of a track (AMS*)
During playback, turn the jog dial the same direction as the 9 or ( indicator to go forward. Turn the opposite direction to go back. (Or press = or + on the remote.) The search direction, + (forward) or (back), and number of songs being skipped (1~9) appear in the display.
Example: searching forward 2 songs
Press TAPE A (or TAPE B) ( (DECK A (or DECK B) ( on the remote).
Press TAPE A (or TAPE B) 9 to play the reverse side. (Press DECK A (or DECK B) ( again on the remote to play the reverse side.) The tape starts playing.
* AMS (Automatic Music Sensor)
The AMS function may not operate correctly under the following circumstances: When the unrecorded space between songs is less than 4 seconds long. If completely different information is recorded on the left and right channels. When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.)
* The deck stops automatically after repeating the sequence five times. ** Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side).
To Stop play Fast-forward Rewind Adjust the volume Do this Press p. Press 0 or ). Press 0 or ). Turn VOLUME +/ (or press VOL +/ on the remote).
Remove the cassette Press 6.
Recording from a tape
You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted.
To stop dubbing
When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side. If you set DIRECTION to when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. You dont have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A.
Press 6 and insert a recorded tape in deck A and a blank tape in deck B.
With the side you want to play/record facing forward
Using the CD display
You can check the remaining time of the current track or that of the CD. When a CD TEXT disc is loaded, you can check the information stored on the disc, such as the titles or artist names.
/ Press DISPLAY.
Each time you press the button during normal playback or in the stop mode, the display changes as follows:
During normal playback
n Playing time on the current track Remaining time on the current track Remaining time on current CD (1 DISC mode) or --.-- display (ALL DISCS mode) Title name of the current track* Clock display (for eight seconds) Effect name or EFFECT ON (OFF)
In the stop mode
n Title name of the CD* Artist information* Total number of tracks and total playing time Clock display (for eight seconds) Effect name or EFFECT ON (OFF)
* With CD TEXT discs only ( certain characters cannot be displayed ). When the CD contains more than 20 tracks, CD TEXT is not displayed from track 21 on.
Playing the CD tracks repeatedly
This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play.
/ Press REPEAT during playback
until REPEAT appears in the display.
Repeat Play starts. Do the following procedure to change the repeat mode.
To repeat All the tracks on the current CD All the tracks on all CDs Only one track Press PLAY MODE repeatedly until 1 DISC appears in the display. PLAY MODE repeatedly until ALL DISCS appears in the display. REPEAT repeatedly until REPEAT 1 appears in the display while playing the track you want to repeat.
To cancel Repeat Play
Press REPEAT so that REPEAT or REPEAT 1 disappears from the display.
Playing the CD tracks in random order
You can play all the tracks on one CD or all CDs in random order.
(Power) DISC 1~3
To cancel Shuffle Play
Press PLAY MODE repeatedly until SHUFFLE or PROGRAM disappears from the display. The tracks continue playing in their original order.
To select a desired CD
Press DISC 1~3. Tips
You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select SHUFFLE. To skip a track, turn the jog dial clockwise (or press + on the remote).
Press FUNCTION repeatedly until CD appears in the display, then place a CD. Press PLAY MODE repeatedly until 1 DISC SHUFFLE or ALL DISCS SHUFFLE appears in the display.
ALL DISCS shuffles all the CDs in the player. 1 DISC shuffles the CD whose DISC indicator is green.
Press CD (P.
All the tracks play in random order.
Programming the CD tracks
You can make a program of up to 32 tracks from all the CDs in the order you want them to be played.
Press FUNCTION repeatedly until CD appears in the display, then place a CD. Press PLAY MODE repeatedly until PROGRAM appears in the display. Press one of the DISC 1~3 buttons to select a CD. Turn the jog dial until the desired track appears in the display.
Total playing time (including selected track)
The track is programmed. The program step number appears, followed by the total playing time.
You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
Place a CD and insert a blank tape into deck B. Press FUNCTION repeatedly until CD appears in the display. Press PLAY MODE repeatedly until PROGRAM appears in the display. Press one of the DISC 1~3 buttons to select a CD. Turn the jog dial until the desired track appears in the display.
2 3, DOLBY NR 8
To program additional tracks to be recorded on side A, repeat steps 4 to 6.
Skip step 4 to select tracks from the same disc.
Press P on the remote to insert a pause at the end of side A.
P appears in the display and the total playing time resets to 0.00 in the display.
Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B.
Selecting tape length automatically
Tape Select Edit
You can check the most suitable tape length for recording a CD. Do the following steps before recording.
10 Press CD SYNC.
Insert a CD. Press FUNCTION repeatedly until CD appears in the display. Press EDIT once, so that EDIT flashes.
The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively.
11 Press DIRECTION repeatedly to
select A to record on one side. Select (or RELAY) to record on both sides.
12 Press REC PAUSE/START.
You cannot use Tape Select Edit for discs containing over 20 tracks. You cannot use this function after programming. In order to use this function, you must first cancel the program by pressing PLAY MODE repeatedly until PROGRAM or SHUFFLE disappears from the display.
To check the order
Press CHECK on the remote repeatedly. After the last track, CHECK END appears.
To cancel Program Edit
Press PLAY MODE repeatedly until PROGRAM or SHUFFLE disappears from the display. Tip
When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that DOLBY NR appears after pressing CD SYNC.
Looping part of a CD
With the loop function, you can repeat part of a CD during playback. This lets you create original recordings.
Flashing part of a CD
With the flash function, you can flash the CD sound during playback. This lets you create original recordings.
Press FILE SELECT.
The last effect chosen appears in the display.
Use the jog dial (or press./> on the remote) to select the preset you desire.
The preset name appears in the display. See the chart Music menu options.
To cancel the effect
Press ON/OFF on the remote repeatedly so that EFFECT OFF appears in the display.
Music menu options
SUR appears if you select an effect with surround effects.
ROCK POP JAZZ DANCE SOUL ACTION ROMANCE DRAMA SPORTS FLAT
Standard music sources
Soundtracks and special listening situations Listening without effects
Changing the spectrum analyzer display
You can enjoy changing the display while listening to the music.
Selecting the surround effect
You can enjoy the surround effect.
/ Press SURROUND to turn the
surround effect on or off.
Every time you press the button, the display changes as follows:
n SURROUND ON (SUR SURROUND OFF (off) )
/ Press SPECTRUM ANALYZER.
Every time you press the button, the display changes as follows: IMAGE PATTERN NORMAL PATTERN
When you choose other sound effects, the surround effect will be canceled.
Using the Radio Data System (RDS)
(For European model only) What is the Radio Data System?
Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features like station name display and location of stations by program type. RDS is available only on FM stations.* Note
RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
To check the RDS information
Each time you press DISPLAY, the display changes as follows: n Station name* Frequency Program type* Clock display Effect name or EFFECT ON (OFF)
* If the RDS broadcast is not received, the station name and program type may not appear in the display.
Locating a station by program type (PTY)
You can locate a station you want by selecting a program type. The unit tunes in the type of programs currently being broadcast from the RDS stations stored in the tuners preset memory.
You can wake up to music at a preset time every day. Make sure you have set the clock (see Step 2: Setting the time).
/ Press SLEEP on the remote.
Every time you press the button, the minute display (the turn-off time) changes as follows: AUTO n 90min n 80min n 70min n n 10min n OFF n AUTO
When you choose SLEEP AUTO
The power turns off when the current CD or tape finishes playback (for up to 100 minutes).
To check the remaining time
Press SLEEP once.
3 4,5,6, 2 7,8
Prepare the music source you want to play.
CD: Insert a CD. To start from a specific track, make a program (see Programming the CD tracks). Tape: Insert a tape with the side you want to play facing forward. Radio: Tune in the preset station you want (see Step 3: Presetting radio stations).
To change the time to turn off
Select the time you want by pressing SLEEP.
To cancel the Sleep Timer function
Press SLEEP repeatedly until SLEEP OFF appears.
Adjust the volume. Press CLOCK/TIMER SET.
SET DAILY 1 appears.
Turn jog dial to select DAILY 1 (or 2), then press ENTER/NEXT.
ON appears and the hour digits flash in the display.
To check the setting
Press TIMER SELECT and turn the jog dial to select the respective mode (DAILY 1 or DAILY 2), then press ENTER/NEXT. To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to select TIMER OFF, then press ENTER/ NEXT. Tip
The power turns on 15 seconds before the preset time.
Set the time to start playback.
Turn jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing.
Turn jog dial to set the minute, then press ENTER/NEXT. The hour indication flashes again.
Set the time to stop playback following the above procedure. Turn jog dial until the music source you want appears.
The indications change as follows: n TUNER CD PLAY N n TAPE PLAY N
The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time and the music source, appears, then the original display appears.
Turn off the power.
Timer-recording radio programs
To timer-record, you must preset the radio station (see Step 3: Presetting radio stations) and set the clock (see Step 2: Setting the time) beforehand.
Set the time to start recording.
Turn the jog dial to set the hour, then press ENTER/NEXT. The minute indication starts flashing.
Turn the jog dial to set the minute, then press ENTER/NEXT. The hour indication flashes again.
Set the time to stop recording following the above procedure.
The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., TUNER FM 5), then the original display appears.
Insert a recordable tape. Turn off the power.
When the recording starts, the volume level is set to the minimum.
Press TIMER SELECT and turn the jog dial to select REC, then press ENTER/NEXT. To change the setting, start over from step 1.
To cancel the timer operation Tune in the preset radio station (see Listening to the radio). Press CLOCK/TIMER SET.
SET DAILY 1 appears. Press TIMER SELECT and turn the jog dial to select TIMER OFF, then press ENTER/ NEXT. Note
If the power is on at the preset time, the recording will not be made.
Turn jog dial to select REC, then press ENTER/NEXT.
Connecting audio components
Select one of the following two connections, depending on the equipment to be connected and method of connecting. Refer to the instructions of each component.
Connecting an MD deck for analog recording
Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until MD appears.
Connecting an MD deck for digital recording
You can record from CD into the MD deck digitally by connecting an optical cable.
To the audio output of the MD deck
To the audio input of the MD deck
To the DIGITAL IN jack of the MD deck
When you connect a Sony MD deck, you can use the MD (, P, and p buttons on this units remote to perform play, pause, and stop operations.
Optical Cover Holder
If you cannot select MD even when you have pressed FUNCTION, press while holding down FUNCTION when the power is turned off. VIDEO will be switched to MD. To return to VIDEO do the same procedure.
Keep the optical cover at the slot provided.
Connecting audio components (continued)
Connecting a VCR
Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, hold down FUNCTION and press when the power is turned off. This switches the MD function to VIDEO. Once you enable the VIDEO function, just press FUNCTION repeatedly until VIDEO appears.
To the audio output of the VCR
Connecting a super woofer speaker
(except for European model)
You can connect an optional super woofer speaker.
To super woofer
If the sound is distorted or too loud when selecting VIDEO, or you want to switch back to MD, repeat the operation described above for switching to MD.
Connecting external antennas
Connect the external antenna to improve the reception.
Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Jack type A
Connect the optional FM external antenna. You can also use the TV antenna instead. Jack type A
Insulated wire (not supplied)
75-ohm coaxial cable (not supplied)
IEC standard socket connector (not supplied)
On operating voltage
Before operating the unit, check that the operating voltage of your unit is identical with the voltage of your local power supply.
Notes on CDs
Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Unplug the unit from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Never pull the cord itself. Should any solid object or liquid fall into the component, unplug the unit and have the component checked by qualified personnel before operating it any further. The AC power cord must be changed only at the qualified service shop.
Cleaning the cabinet
Use a soft cloth slightly moistened with mild detergent solution.
To save a tape permanently
To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.
Place the unit in a location with adequate ventilation to prevent heat build-up in the unit. Do not place the unit in an inclined position. Do not place the unit in locations where it is; Extremely hot or cold Dusty or dirty Very humid Vibrating Subject to direct sunlight
Tab of side B
Tab of side A Side A Break off the cassette tab of side A
If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the unit will not operate properly. Remove the CD and leave the unit turned on for about an hour until the moisture evaporates. When you move the unit, take out any discs. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. However, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape.
Tape type: CrO2/METAL
Before placing a cassette in the tape deck
Take up any slack in the tape. Otherwise the tape may get entangled in the parts of the tape deck and become damaged.
If you run into any problem using this unit, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
When using a tape longer than 90 minutes
The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding etc. frequently. The tape may get entangled in the tape deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. When the tape heads become dirty; the sound is distorted there is a decrease in sound level the sound drops out the tape does not erase completely the tape does not record Make sure to clean the tape heads before you start an important recording or after playing an old tape. Use separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette.
The display starts flashing as soon as you plug in the power cord even though you havent turned on the power (demonstration mode). For MHC-RXD5/R550: Press DISPLAY when the power is turned off. If the unit is in the Power Saving Mode, press POWER SAVE/ DEMO (STANDBY). For MHC-GRX30/GRX30J: Press DEMO (STANDBY) when the power is turned off. The demonstration mode appears automatically the first time you plug in the power cord or if there is a power outage. The clock setting is canceled. The power cord is disconnected or a power failure occurs. Redo Step 2: Setting the time. If you have set the timer, also redo Waking up to music and Timer-recording radio programs. The radio presetting/timer setting is canceled. The power cord is disconnected or a power failure occurs for longer than half a day. Redo Step 3: Presetting radio stations. There is no sound. Rotate VOLUME clockwise. The headphones are connected. Insert only the stripped portion of the speaker cord into the SPEAKER jack. Inserting the vinyl portion of the speaker cord will obstruct the speaker connections.
Severe hum or noise (TUNED or STEREO flashes in the display). Adjust the antenna. The signal strength is too weak. Connect the external antenna. A stereo FM program cannot be received in stereo. Press REPEAT STEREO/MONO so that MONO disappears.
If other troubles not described above occur, reset the system as follows:
1 Unplug the power cord. 2 Plug the power cord back in. 3 Press p, ENTER/NEXT, and same time. 4 Press to turn on the power.
The unit is reset to factory settings. All the settings you made, such as the preset stations, clock, and timer are cleared. You should set them again.
AUDIO POWER SPECIFICATIONS: (USA models only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION with 6 ohm loads both channels driven, from 70-20,000 Hz; rates 60 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. Amplifier section
Canadian model: Continuous RMS power output (reference) 60 + 60 watts (6 ohms at 1 kHz, 10% THD) Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 30 W) European model: DIN power output (rated) 60 + 60 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 80 + 80 watts (6 ohms at 1 kHz, 10% THD) Music power output (reference) 140 + 140 watts (6 ohms at 1 kHz, 10% THD) Other models: The following measured at AC 110, 220 V 50/60 Hz DIN power output (rated) 60 + 60 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 80 + 80 watts (6 ohms at 1 kHz, 10% THD) The following measured at AC 120, 240 V 50/60 Hz DIN power output (rated) 70 + 70 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 100 + 100 watts (6 ohms at 1 kHz, 10% THD)
Inputs MD/VIDEO (AUDIO) IN: voltage 450 mV/250 mV, (phono jacks) impedance 47 kilohms MIX MIC: sensitivity 1 mV, (phone jack) impedance 10 kilohms Outputs MD/VIDEO (AUDIO) OUT: (phono jacks) voltage 250 mV impedance 1 kilohms PHONES: accepts headphones of 8 (stereo mini jack) ohms or more SPEAKER: accepts impedance of 6 to 16 ohms SUPER WOOFER (except for European model): voltage 1V, impedance 1 kilohm
CD player section
Compact disc and digital audio system Laser Semiconductor laser (=780nm) Emission duration: continuous Laser output Max. 44.6 W* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response 2 Hz 20 kHz (0.5 dB) Wavelength nm Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB CD OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 660 nm Output Level 18 dBm System
Tape player section
Recording system Frequency response (DOLBY NR OFF) 4-track 2-channel stereo 40 13,000 Hz (3 dB), using Sony TYPE I cassette 40 14,000 Hz (3 dB), using Sony TYPE II cassette 0.15% W.Peak (IEC) 0.1% W.RMS (NAB) 0.2% W.Peak (DIN)
Wow and flutter
FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 108.0 MHz FM lead antenna 75 ohm unbalanced 10.7 MHz
AM tuner section Tuning range 2 Band type: North American models: 530 1,710 kHz (with the interval set at 10 kHz) 531 1,710 kHz (with the interval set at 9 kHz) European models: 531 1,602 kHz (with the interval set at 9 kHz) Other models: 531 1,602 kHz (with the interval set at 9 kHz) 530 1,710 kHz (with the interval set at 10 kHz) 3 Band type: Middle Eastern models: MW: 531 1,602 kHz (with the interval set at 9 kHz) SW: 5.95 17.90 MHz (with the interval set at 5 kHz) Other models: MW: 531 1,602 kHz (with the interval set at 9 kHz) 530 1,710 kHz (with the interval set at 10 kHz) SW: 5.95 17.90 MHz (with the interval set at 5 kHz) Antenna AM loop antenna Antenna terminals External antenna terminal Intermediate frequency 450 kHz
SS-RXD5 for MHC-RXD5 (North American model) SS-GRX30 for MHC-GRX30 SS-GRX30G for MHC-GRX30 (Middle Eastern model) SS-GRX30J for MHC-GRX30J Speaker system Speaker units Woofer: Center Tweeter: Super Tweeter: Nominal impedance Dimensions (w/h/d) Mass 3-way, 3-unit, bass-reflex type 15 cm, cone type 5 cm, cone type 2 cm, ceramic type 6 ohms Approx. 220 x 340 x 265 mm (85/8 x 133/8 x 107/16 in.) Approx. 3.8 kg net per speaker (8 lb. 4 oz.)
Power requirements North American models: European models: Australian models: Mexican models: Thailand models: Other models: Power consumption U.S.A. models: Canadian model: European models: Other models: Dimensions (w/h/d) Mass : 120 V AC, 60 Hz 230 V AC, 50/60 Hz 230 - 240 V AC, 50/60 Hz 120 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz 110 - 120 V or 220 - 240 V AC, 50/60 Hz 130 watts 110 watts 130 watts 110 watts Approx. 280 x 340 x 380 mm (11 x 133/8 x 15 in.) Approx. 9.5 kg (21 lb.) AM loop antenna (1) Remote commander (1) Batteries (2) FM lead antenna (1) Front speaker pads (8) Speaker cords (2) (for European model only)
SS-RXD5S for MHC-RXD5 (European model) SS-R550 for MHC-R550 (European model) Speaker system Speaker units Woofer: Tweeter: Super Tweeter: Nominal impedance Dimensions (w/h/d) Mass 3-way, 3-unit, bass-reflex type 17 cm, cone type 5 cm, cone type 2 cm, dome type 6 ohms Approx. 220 x 340 x 280 mm (85/8 x 133/8 x 11 in.) Approx. 4.0 kg net per speaker (8 lb. 10 oz.)
Design and specifications are subject to change without notice.
Adjusting the audio emphasis 28 the sound 27 the volume 11, 13, 16 Antennas 5, 39 Automatic Source Selection 11, 14, 16
Saving recordings 40 Selecting the audio emphasis 28 Setting the time 6 Shuffle Play 20 Sleep Timer 34 Sound adjustment 27 Speakers 4, 38 Station name 31
Normal Play 10 Non-Stop Play 22
One Touch Play 11, 14, 16
Playing a CD 10 a preset radio station 13 tracks in random order (Shuffle Play) 20 a tape 15 tracks in the desired order (Program Play) 21 tracks repeatedly (Repeat Play) 19 Presetting radio stations 7 Preset Tuning 13 Program Edit 24 Program Play 21 Protecting recordings 40 PTY 30
T, U, V, W, X, Y, Z
Tape deck 15, 23 Timer falling asleep to music 34 timer recording 36 waking up to music 34 Troubleshooting 41 Tuner 7, 13 Tuning interval 8, 44
CD player 10, 18 CD Synchro Recording 12 Clock setting 6 Connecting. See Hooking up
Daily Timer 34 Display 18, 29
Radio Data System 30 Radio stations presetting 7 tuning in 13 Recording a CD 12, 24 a radio program 14 a tape 17, 23 timer recording 36 Repeat Play 19 Resetting the system 43
H, I, J
Hooking up optional components 37 the antennas 5, 39 the power 5 the speakers 4 the system 4
Printed in Malaysia
MHC-GRX30/GRX30J/R550/RXD5 are composed of following models. As for the service manual, it is issued for each component model, then, please refer to them.
US Model Canadian Model
AEP Model UK Model
COMPONENT MODEL NAME
MHC-GRX30 MHC-GRX30J MHC-R550 HCD-GRX30J HCD-R550 MHC-RXD5 HCD-RXD5 SS-RXD5 (US, CND) SS-RXD5S (EXCEPT US, CND)
COMPACT DISC DECK RECEIVER SYSTEM SPEAKER SYSTEM
HCD-GRX30 SS-GRX30 SS-GRX30G (EXCEPT (E3, EA) E3, EA)
Part No. Description ACCESSORIES & PACKING MATERIALS ******************************** 1-475-572-11 COMMANDER, STANDARD (RM-SR5)(GRX30:EXCEPT E3,EA,RXD5) 1-475-572-41 COMMANDER, STANDARD (RM-SR5B)(GRX30:E3,EA,GRX30J,R550) 1-501-374-11 ANTENNA,LOOP (GRX30,GRX30J,US,CND,CIS) 1-501-843-21 ANTENNA,LOOP (AEP, UK,G,AED) 1-501-804-11 ANTENNA (FM)(AEP,UK,G,AED,CIS) 1-501-659-41 ANTENNA (FM)(GRX30,GRX30J,US,CND) 3-866-375-11 MANUAL, INSTRUCTION (ENGLISH) (EXCEPT AEP,UK,G,AED,TH,KR) 3-866-375-21 MANUAL, INSTRUCTION (FRENCH) (CND,E2,E3,SP,EA) 3-866-375-31 MANUAL, INSTRUCTION (SPANISH) (E2,E3,SP,MX,AR) 3-866-375-41 MANUAL, INSTRUCTION (CHINESE) (E3,SP,TW) 3-866-375-51 3-866-375-61 3-866-375-71 3-866-386-11 3-866-386-21 MANUAL, INSTRUCTION (ARABIC) (E3,EA) MANUAL, INSTRUCTION (KOREAN) (KR) MANUAL, INSTRUCTION (ENGLISH,THAI) (TH) MANUAL, INSTRUCTION (ENGLISH) (AEP,UK,CIS) MANUAL, INSTRUCTION (FRENCH,SPANISH,PORTUGUESE) (AEP) Remark Part No. Description Remark
3-866-391-51 MANUAL, INSTRUCTION (GREEK)(CIS) 3-866-391-61 MANUAL, INSTRUCTION (ENGLISH,FRENCH) (GRX30J) 3-866-391-71 MANUAL, INSTRUCTION (SPANISH,CHINISE) (GRX30J:E,JE) 3-866-391-81 MANUAL, INSTRUCTION (ARABIC) (GRX30J:EA,JE) 3-866-391-91 MANUAL, INSTRUCTION (RUSSIAN,KOREAN,PORTUGUESE) (GRX30J:JE) 4-991-151-21 COVER,BATTERY (FOR RM-SR5) 4-991-151-31 COVER,BATTERY (FOR RM-SR5B)
AED AUS CND EA G E2 E3 : North European : Australian : Canadian : Saudi Arabia : German : Central and South America : Middle and Near East JE SP TH TW KR AR : Tourist : Singapore : Thai : Taiwan : Korea : Argentina
3-866-386-31 MANUAL, INSTRUCTION (DUTCH,ITALIAN) (AEP) 3-866-386-41 MANUAL, INSTRUCTION (DANISH,FINNISH,SWEDISH) (AED) 3-866-386-51 MANUAL, INSTRUCTION (GERMAN) (AEP,G) 3-866-391-11 MANUAL, INSTRUCTION (POLISH,RUSSIAN) (CIS) 3-866-391-21 MANUAL, INSTRUCTION (CZECH) (CIS) 3-866-391-31 MANUAL, INSTRUCTION (HUNGARIAN) (CIS) 3-866-391-41 MANUAL, INSTRUCTION(TURKISH) (CIS)
MINI Hi-Fi COMPONENT SYSTEM
Home A&V Products Company
99C001689-1 Printed in Japan 1999.3 Published by Quality Assurance Dept. (Shinagawa)
TXP50X10Y LP725 F-series Dinovo LM700 Rx-7020 DVD625 021 ZFV1006 GCF399buqa KX-TGA243B RH398H DMR-BS850EB HX-DU010EC Optio P80 RB-890 4170AF Black DES-802 CDX-646X 27850 ART SLA1 DVD-SH893A BZD 40 68206 PXA-H900 Razrwire Lavamat1100 WD-80290NP Modem HP-1300E SC-HT290 MT 975 P1224 Optio W30 MY215X CQ-DFX683N WV-BW1 Bros WII NEX-5 Mcbr170WMD Cowon V5 Base-V20X MQ802-MQ1202-mq1602 2 0 Trouble XR-5800RV CCD-TRV59E 6005 RS W2252TG-PF Kart 64 Flash 4 0 1000 B 6275I Cdma A4115H Z1285 Macaron DR-07 Holga 120 KD-LX3 V-clic 29DH55N Studio 5 Profile DMC-GF1 Edition M105-S3004 Travelmate-2700 CS-HE9GKE CQ-C7300N X3 2005 Abit AN8 LCT3226 RM-VL900 Review -upright- NS-P240 LN23R51BX Aspire-1610 FO-P510 RM-V20T Discovery 4 0 M7500 TX510FN Syncmaster 740B 10000 VA FB163-A0P CH20-64500 Punto Rev 1 NAD C540 PSS-380 MN-100-L- DS10A Artista 730E Racing WD-1245FHB IC-02E DA-60mkii DMC-LZ5
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101