MHC-GRX80/RXD8/RXD8S HCR-GRX80/RXD8S

SERVICE MANUAL

MHC-GRX80/RXD8/RXD8S is composed of following models. As for the service manual, it is issued for each component model, then, please refer to it.

AEP Model

MHC-RXD8/RXD8S

UK Model

MHC-RXD8
COMPONENT MODEL NAME FOR MHC-GRX80/RXD8/RXD8S.
GRAY E, EA3 COMPACT DISC DECK RECEIVER SYSTEM FRONT SPEAKER SYSTEM SURROUND SPEAKER SYSTEM SS-GRX80G SS-SR125G MHC-GRX80 SILVER E HCD-GRX80 EXCEPT E, EA3 HCD-RXD8 HCD-RXD8S MHC-RX8 MHC-RXD8S

E Model Australian Model

MHC-GRX80

SS-GRX80B

SS-GRX80

SS-RXD8

SS-RXD8S SS-SR125

SS-SR125

HCR-GRX80 is composed of HCD-GRX80 and SS-SR125/125G. HCR-RXD8S is composed of HCD-RXD8S and SS-SR125.

SPECIFICATIONS

General Power requirements European models: 230 V AC, 50/60 Hz Australian models: 230 - 240 V AC, 50/60 Hz Israeli and Thai models: 220 V AC, 50/60 Hz Mexican models: 120 V AC, 50/60 Hz Other models: 120 V, 220 V or 230 - 240 V AC, 50/60 Hz. Adjustable with voltage selector. Power wnsumption MHC-GRX80: 190 watts MHC-RXD8/RXD8S: 200 watts Supplied accessories
Abbreviation G : German model EA3 : Saudi Arabia model EA4 : Israel model MX : Mexican model SP : Singapore model TW : Taiwan model AR : Argentine model TH : Thai model
AM loop antenna (1) Remote Commander (1) Batteries (2) FM lead antenna (1) Speaker cords : (4) for MHC-GRX80/RXD8S (2) for MHC-RXD8 Front speaker pads (8) Design and specifications are subject to change without notice. Ref.No. Part No. Description Remark 3-865-609-61 MANUAL, INSTRUCTION (POLISH, RUSSIAN) (AEP, CIS) 3-865-610-11 MANUAL, INSTRUCTION (CZECH) (AEP) 3-865-610-21 MANUAL, INSTRUCTION (HUNGARIAN) (CIS) 3-865-610-31 MANUAL, INSTRUCTION (TURKISH) (CIS) 3-865-610-41 MANUAL, INSTRUCTION (GREEK) (CIS) 3-865-611-11 3-865-611-21 3-866-468-11 4-210-254-01 4-991-151-21 MANUAL, INSTRUCTION (ENGLISH) (EA4) MANUAL, INSTRUCTION (THAI) (TH) MANUAL, INSTRUCTION (FRENCH) (EA3) CUSHION (FOOT) COVER, BATTERY (FOR RM-SR8)

PARTS LIST

Ref.No. Part No. Description ACCESSORIES & PACKING MATERIALS ******************************** 1-475-571-11 1-475-571-21 1-501-374-11 1-501-659-41 1-501-804-11 COMMANDER, STANDARD (RM-SR8) COMMANDER, STANDARD (RM-SR8B) ANTENNA, LOOP ANTENNA (FM) (GRX80) ANTENNA (FM) (RXD8/RXD8S) Remark
3-865-608-11 MANUAL, INSTRUCTION (ENGLISH) (EXCEPT EA4, TH, G) 3-865-608-21 MANUAL, INSTRUCTION (FRENCH, EA3) 3-865-608-31 MANUAL, INSTRUCTION (SPANISH)(AEP, AR, MX) 3-865-608-41 MANUAL, INSTRUCTION (FRENCH, SPANISH) (AEP, E, SP) 3-865-608-51 MANUAL, INSTRUCTION (CHINESE) (E, SP, TW) 3-865-608-61 3-865-608-71 3-865-609-31 3-865-609-41 MANUAL, INSTRUCTION (ARABIC) (E, EA3) MANUAL, INSTRUCTION (PORTUGUESE) (AEP) MANUAL, INSTRUCTION (GERMAN) (AEP, G) MANUAL, INSTRUCTION (DUTCH, ITALIAN, PORTUGUESE) (AEP) 3-865-609-51 MANUAL, INSTRUCTION (DANISH, FINNISH, SWEDISH)(AEP)
4-991-151-31 COVER, BATTERY (FOR RM-SR8B)
MINI Hi-Fi COMPONENT SYSTEM

MICROFILM

Sony Corporation

9-928-827-11

Home A&V Products Company
99B001671-1 Printed in Japan 1999.2 Published by Quality Assurance Dept. (Shinagawa)

http://getMANUAL.com

4. SERVICE MODE.. 11 5. MECHANICAL ADJUSTMENTS. 14 6. ELECTRICAL ADJUSTMENTS. 14
8. EXPLODED VIEWS 7. DIAGRAMS
7-1. Circuit Boards Location.. 18 7-2. Block Diagrams CD Section... 19 Deck Section... 21 Main Section... 23 Main Power/Sub Power Section.. 25 Display Section... 27 7-3. Printed Wiring Board BD (CD) Section .. 31 7-4. Schematic Diagram BD (CD) Section . 33 7-5. Printed Wiring Board Main Section .. 35 7-6. Schematic Diagram Main (1/4) Section . 37 7-7. Schematic Diagram Main (2/4) Section . 39 7-8. Schematic Diagram Main (3/4) Section . 41 7-9. Schematic Diagram Main (4/4) Section . 43 8-1. Case Section.. 73 8-2. Chassis Section.. 74 8-3. Front Panel Section... 75 8-4. CD Mechanism Deck Section-1 (CDM38LH-5BD32L). 76 8-5. CD Mechanism Deck Section-2 (CDM38LH-5BD32L). 77 8-6. Base Unit Section (BU-5BD32L).. 78 8-7. TC Mechanism Section-1 (TCM230AWR1/230PWR1). 79 8-8. TC Mechanism Section-2 (TCM230AWR1/230PWR1). 80
9. ELECTRICAL PARTS LIST.. 81

SECTION 1 SERVICING NOTE

HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF

1 Remove the Case.

3 Pull-out the disc tray. 2 Turn the cam to the direction of arrow.
Note for Installation (ROTARY ENCODER)
Note:When attaching the Base unit, Insert the section A into the groove of BU cam.

BU cam

Section A Groove
Note:When attaching the BU cam, engage the Rotary encoder switch as shown in the figure.
CD-TEXT This unit is provided with a simple CD-TEXT display function. The CD-TEXT contents of 20 tracks are displayed on the fluorescent display tube. Since the function is simple, some special characters may not be displayed, or may be displayed as other characters.

SECTION 2 GENERAL

Front Panel
LOCATION OF PARTS AND CONTROLS
1/u (Power) button and indicator DEMO (STANDBY) POWER SAVE button (RXD8/RXD8S) DEMO button (STANDBY) (GRX80) DISC 1 button and indicator DISC 2 button and indicator DISC 3 button and indicator DISC SKIP/EXCHANGE button (Eject) button Disc tray EDIT DIRECTION/TUNER MEMORY button PLAY MODE/DOLBY NR/PTY button (RXD8/RXD8S) PLAY MODE/DOLBY NR button (GRX80) REPEAT/STEREO/MONO button p button ^ (CD) button and indicator TUNER/BAND button NON-STOP button and indicator KARAOKE PON/MPX button SYNC EQ button 18 SYNC BASS button 19 REC PAUSE/START button and indicator 20 DBFB button 21 SURROUND button 22 HI DUB button 23 CD SYNC button 24 VOLUME knob 25 PHONES jack 26 ENTER/NEXT button and indicator 27 ) + button and indicator 28 JOG/0x) dial and indicator 29 GROOVE button and indicator button and indicator 31 AUTO BPM button and indicator 32 PAD B button and indicator 33 PAD A button and indicator 34 MIX MIC jack 35 FLASH button 36 LOOP button 37 JAM button and indicator 38 LEVEL button 39 MIX button 62 MIC LEVEL knob BEAT SPEED button BEAT SELECT button BEAT ON/OFF button and indicator P FILE MEMORY button GEQ CONTROL button FILE SELECT EFECT button ( (B deck) button and indicator 9 (B deck) button and indicator ( (A deck) button and indicator 9 (A deck) button and indicator FUNCTION button SYNC BASS H indicator SYNC BASS L indicator SYNC EQ indicator EFECT indicator Remote sensor DISPLAY button SPECTRUM ANALYZER button CLOCK/TIME SET button TIMER SELECT button and indicator Display Window

This section is extracted from instruction manual.

SECTION 3 DISASSEMBLY

Note: Follow the disassembly procedure in the numerical order given.

3-1. LOADING PANEL

3 Loading panel
2 Pull-out the disc tray.
1 Turn the cam to the direction of arrow.

3-2. FRONT PANEL

9 Flat type wire (CN303) 2 Screw (BVTT3x6) 8 Flat type wire (CN304)

Lead wire

6 Screw (BVTT3x6)
0 Front panel 5 Screw (BVTT3x6) 1 Screw (BVTT3x6) 7 Flat type wire (CN501) 4 Screw (BVTT3x6) 3 Screw (BVTT3x6)
3-3. CASSETTE LID AND TAPE MECHANISM

9 Tape mechanism

Portion A
8 Three screws (BVTP2.6x8)
6 Spring 7 Two screws (BVTP2.6x8)
3 Cassette holder (R) assembly 4 Cassette holder (L) assembly

5 Spring

Portion C
2 Release (Refer to order No. 1)

Portion B

1 Release
3-4. CD SW BOARD AND PANEL BOARD
3 CD SW board 1 Three screws (BVTP2.6x8)
2 Three screws (BVTP2.6x8)

8 Flat type wire (CN601)

4 Knob (Jog) 6 Nut 9 Four screws (BVTP2.6x8) 0 Five screws (BVTP2.6x8) 7 Nut 5 Knob (Vol) ! Panel board ! Five screws (BVTP2.6x8)

3-5. DISC TRAY

(Perform after removing the front panel.) Note:When installing the Disc tray, pull around the flat type wire to pass through the claw A and claw B, as shown in the figure.
3 Flat type wire (8 core)

4 Two claws

2 Pull-out the disc tray. 5 Remove the disc tray.

Claw B Claw A

1 Turn the cam the direction of arrow.

SECTION 4 SERVICE MODE

MC Cold Reset The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Press three buttons p , ENTER/NEXT , and 1/u simultaneously. 2. COLD RESET is displayed on the fluorescent display tube and reset is executed. CD Delivery Mode This mode moves the pick-up to the position durable to vibration. Use this mode when returning the set to the customer after repair. Procedure: 1. Press 1/u button to turn the set ON. 2. Press LOOP button and 1/u button simultaneously. 3. A message LOCK is displayed on the fluorescent indicator tube, and the CD delivery mode is set. MC Hot Reset This mode resets the set with the preset data kept stored in the memory. The hot reset mode functions same as if the power cord is plugged in and out. Procedure: 1. Press three buttons p , ENTER/NEXT , and DISC 1 simultaneously. 2. The fluorescent indicator tube becomes blank instantaneously, and the set is reset. Sled Servo Mode This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the pick-up. Procedure: 1. Press 1/u button to turn the set ON. 2. Press three buttons p , ENTER/NEXT , and simultaneously. 3. The Sled Servo mode is selected, if CD is blanking on the fluorescent indicator tube. 4. With the CD in stop status, When the 0 AMS ) knob is rotated in the clockwise direction, the pick-up moves outside. When rotated counterclockwise, it moves inside. 5. To exit from this mode, perform as follows: 1) Move the pick-up to the most inside track. 2) Execute MC cold reset. (Press the three buttons p , ENTER/NEXT , and 1/u button simultaneously.) Note: Always move the pick-up to most inside track when exiting from this mode. Otherwise, a disc will not be unloaded. Do not run the sled motor excessively, otherwise the gear can be chipped. Change-over of AM Tuner Step between 9kHz and 10kHz A step of AM channels can be changed over between 9kHz and 10kHz. Procedure: 1. Press 1/u button to turn the set ON. 2. Select the function TUNER, and press TUNER/BAND button to select the BAND AM. 3. Press 1/u button to turn the set OFF. 4. Press ENTER/NEXT and 1/u buttons simultaneously, and the display of fluorescent indicator tube changes to AM 9k STEP or AM 10k STEP, and thus the channel step is changed over. LED and Fluorescent Indicator Tube All Lit, Key Check Mode Procedure: 1. Press three buttons p , ENTER/NEXT , and DISC 2 simultaneously. 2. LEDs and fluorescent indicator tube are all turned on. Press DISC 2 button, and the key check mode is activated. 3. In the key check mode, the fluorescent indicator tube displays K 0 V0 J0. Each time a button is pressed, Kvalue increases. However, once a button is pressed, it is no longer taken into account. J Value increases like 1, 2, 3. if rotating 0 AMS ) knob in + direction, or it decreases like 0, 9, 8. if rotating in - direction. V Value increases like 1, 2, 3. if rotating VOLUME knob in + direction, or it decreases like 0, 9, 8. if rotating in - direction. 4. To exit from this mode, press three buttons in the same manner as step 1, or disconnect the power cord.

Insert the WS-48B into deck B. Press the ( button of deck B. Press the HI DUB button and play the tape at double speed. Adjust RV1001 of the LEAF SW board so that the reading of the frequency counter becomes Hz. 5. Press the HI DUB button and play the tape at normal speed. 6. Adjust RV1002 of the LEAF SW board so that the reading of the frequency counter becomes Hz. Adjustment Location: LEAF SW board Sample Value of Wow and flutter W.RMS (JIS) less than 0.3% (test tape: WS-48B) Playback Level Adjustment (Deck A, Deck B) Procedure: Mode: Playback
test tape P-4-L300 (315Hz, 0dB) set level meter

Reverse

Foward

MD OUT

Deck A is RV311 (L-CH) and RV411 (R-CH), deck B is RV301 (L-CH) and RV401 (R-CH) so that adjustment within the following adjustment level. Adjustment level: CN301 playback level: 301.5 to 338.3 mV (8.2 to 7.2 dB) level difference between the channels: within 0.5 dB Adjustment Location: AUDIO board
Adjustment Location [LEAF SW BOARD]
RV1001(High Speed) RV1002(Normal Speed)

RV1002

RV1001
Record Bias Adjustment (Deck B) Procedure: INTRODUCTION When set to the test mode performed in Tape Speed Adjustment, when the tape is rewound after recording, the REC memory mode which rewinds only the recorded portion and playback is set. This REC memory mode is convenient for performing this adjustment. During recording, the input signal FUNCTION will automatically switch to VIDEO. (After recording, press the 0 button without stopping will return to the position where recording was started.) 1. Press FUNCTION button to select VIDEO. (This step is not necessary if the above test mode has already been set.) 2. Insert a tape into deck B, press the r REC button, and then press the ( button to start recording. 3. Mode: Record
VIDEO (AUDIO) IN 1) 315 Hz } 50 mV (23.8 dB) 2) 10 kHz AF OSC 600 attenuator set blank tape CS-123
Record Level Adjustment (Deck B) Procedure: INTRODUCTION When set to the test mode performed in Tape Speed Adjustment, when the tape is rewound after recording, the REC memory mode which rewinds only the recorded portion and playback is set. This REC memory mode is convenient for performing this adjustment. During recording, the input signal FUNCTION will automatically switch to VIDEO. (After recording, press the 0 button without stopping will return to the position where recording was started.) 1. Press FUNCTION button to select VIDEO 1. (This step is not necessary if the above test mode has already been set.) 2. Insert a tape into deck B, press the r REC button, and then press the ( button to start recording. 3. Mode: Record

VIDEO/IN (AUDIO) L MD IN L

(Page 27)

J191 SUPER WOOFER

MD/VIDEO (AUDIO) OUT L

DECK SECTION

(Page 22)

RELAY A SHUT B SHUT B HALF/REC A/REC B A HALF A PLAY B PLAY PB A / B NORM/HIGH BIAS ON/OFF RM ON/OFF NR ON/OFF REC/PB PASS CAPM CNT1 CAPM CNT2 ALC ON/OFF LM ON/OFF CAP M H/L A TRG B TRG MS OUT ST L RDS DATA RDS INT ST-DOUT ST-DIN STEREO TUNED ST CE ST-MUTE ST-CLK L CH TBL. L TBL. R SCOR TRAY SENS HOLD SENS X RST CD CLK CD DATA DISC SENS SQ CLK SQ DATA X LAT OUT-OPEN ENC-1 ENC-2 ENC-3 LD IN LD OUT
TC RELAY A SHUT B SHUT B HALF A HALF A PLAY SW B PLAY SW PB A/B EQ H//N BIAS REC MUTE NR ON/OFF R/PB PASS
BASS FRQ. 44 DBFB H/L 7 LINE MUTE 6 F RELAY 3 WAKE UP 18 ST-BY LED/CLOCK OUT 39 IIC DATA 30 IIC CLK 29 TIMER LED 26 RESET 12 RESET SWITCH Q501 AC CUT 22 (CHECK) MUTE SW Q508

MUTE SW Q509

MUTE Q192 F RELAY
75 CAPM CNTCAPM CNTALC TC MUTE CAP M H/L A TRG B TRG AMS IN 493-LAT 493-DATA 493-CLK MASTER CONTROL IC501

POWER SECTION

3 RESET ICD503 +5.6V

(Page 25)

FM/AM TUNER TUNER UNIT IS SUPPLED AS THE ASSEMBLED BLOCK
54 ST DIN 50 STEREO 51 TUNED 52 ST CE 49 ST MUTE 53 ST DOUT 55 ST CLK 66 TBL L TBL R SCOR T SENS HOLD SENS XRST CD CLK CD DATA DISC SENS SQ CLK SQ DATA XLT OUT OPEN ENC1 ENC2/DISC-LED ENC3/UP-SW LOAD IN LOAD OUT RXD8, RXD8S

X-OUT 13 X-IN 15

X613 16MHz

XC-IN 10 XC-OUT 11

X601 32.768KHz

RY-SW 36

POWER 2 CD POWER 5 FL SW 42 STBY RELAY 43
POWER ON/OFF CD POWER FL SW ON/OFF STANDBY RELAY ON/OFF STK MUTE

(Page 20)

R CH: Same as L ch SIGNAL PATH : FM : CD : PB : REC : VIDEO/MD Abbreviation EA3 : Saudi Arabia model.

STK MUTE 1

22 RDS DATA 21 RDS INT

PROTECTOR 27

PROTECTOR
MAIN POWER/SUB POWER SECTION

F RELAY

TM402 SURROUND SPEAKER THERMAL DET Q831, 832 THP831 Lch RY401 RELAY DRIVE Q435, 436, 431 FAN MOTOR DRIVER Q401, 402 Rch

Pin No. 92 93, 100

Pin Name STEREO TUNED ST-CE ST-DOUT ST-DIN ST-CLK SENS HDLD XLT XRST DISC-SENS T-SENS VCC TBL-L VSS TBL-R LOAD-OUT LOAD-IN ENC 3/UP-SW ENC 2/DISC-LED ENC 1 OUT-OPEN B-TRG A-TRG CAP-M-COT2 CAP-M-COT1 CAP-M-H/L AMS-IN TC-MUTE R/PB/PAS NR-ON/OFF REC-MUTE BIAS EQ-H/N PB-A/B ALC B-PLAY-SW A-PLAY-SW A-HALF B-HALF B-SHUT A-SHUT SOFT-TEST KEY/CD-ADJ MODEL IN AVSS SPEC-IN VREF AVCC TC-RELAY
I/O I I O O I O I O O O I I O O O O I I I O O O O O O I O O O O O O O O I I I I I I O I I I I O
Function Stereo detection for tuner Tuned detection for tuner Tuner chip enable output Tuner data output Tuner data input Tuned clock output BD Condition signal input Mode hold signal output CD latch signal output CD reset signal output Slit sensor of disc table input CD table detection signal input Power supply (+5V) Table motor control output Ground Table motor control output Loading motor control signal output
Disc tray address detect encoder input Loading out detection signal output Trigger motor control output Capstan motor control 1(-) signal output Capstan motor control 2(-) signal output Capstan motor H/L speed select signal output Connected to ground TC mute ON/OFF selection output REC/PB/PASS selection output NR ON/OFF signal output REC mute ON/OFF selection output Bias ON/OFF selection output Equalizer H/N select output PB Deck A/Deck B select output ALC ON/OFF output Deck B play detect Deck A play detect Deck A cassette detect Deck B cassette detect B Deck reel pulse detector A Deck reel pulse detector Software test port CD adjust point port Version select signal input Ground Version select signal input Analog reference voltage input Analog power supply REC/PB head selection output for IC602
IC601 DISPLAY CONTROL (TMP88CS76F-6000) Pin No. 11 to to 42 to to Pin Name SIRCS JOG A L/P SCK LED LA L/P DAT PAD LA L SEL JOG B VOL A VOL B KEY 0 to KEY 3 GRADATION L S LOW (F01) BPF 1 (F02) BPF 2 BPF 3 BPF 4 ALL B (L+R) GLADATION R/WAKE UP VSS I/O VASS VAref VDD I/O G 18 to G 5 VDD VFT G 4 to G 1 S 1 to S 22 VKK VDD for CPU X IN VSS for CPU X OUT RESET CH for PAD BUSY for PAD TEST IIC DATA IIC CLK I O O O I O I O O I O O Ground Ground Analog reference voltage input Power supply (+5V) FL gride signal output Power supply (+5V) FL gride signal output FL segment signal output Power supply (-30V) Power supply (+5V) Xtal (12.5MHz) Ground Xtal (12.5MHz) Reset signal input from main controller Channel signal output for PAD Busy signal output for PAD Connected ground Not used (to ground) Data output for IC501 Clock output for IC501 Not used (to ground) I/O I I O O O O O I I I I O O O O O O I O Function Remote commander signal input Rotary encoder (S601) pulse input LED/PAD clock output LED latch output LED/PAD data output PAD latch output LED select signal Rotary encoder (S601) pulse input Rotary encoder (S602) pulse input Key input LED gradation signal (left) Sptctrum analyzer input (Super low flegency) (40Hz) Sptctrum analyzer input (100Hz) Sptctrum analyzer input (400Hz) Sptctrum analyzer input (2KHz) Sptctrum analyzer input (6KHz) Sptctrum analyzer input (all band) LED gradation signal (right)/WAKE UP signal

SECTION 8 EXPLODED VIEWS

NOTE: Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Hardware (# mark) list and accessories and packing materials are given in the last of this parts list. Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) Cabinets color Abbreviation G : German model EA3 : Saudi Arabia model EA4 : Israel model MX : Mexican model E2 : Without SW tuner model E3 : With SW tuner model SP : Singapore model TW : Taiwan model AUS : Australian model AR : Argentine model TH : Thailand model The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.

8-1. CASE SECTION

CDM38LH-5BD32L

Front panel #2

#1 not supplied

#1 #1 #1

Including Panel board (Ref No. 118)

not supplied

Ref. No. * 3 * 4 * 5
Part No. 4-996-716-01 3-363-099-41 3-363-099-71 3-363-099-01 3-363-099-11 4-214-452-01 4-215-753-01 1-233-545-11 1-233-545-14
Description HOLDER (CDM) SCREW (CASE 3 TP2)(GRAY) SCREW (CASE 3 TP2)(SILVER) SCREW (CASE 3 TP2)(GRAY) SCREW (CASE 3 TP2)(SILVER)

Remark

Ref. No. 7

Part No.

Description
1-233-546-13 ENCAPSULATED COMPONENT (E3,EA3,SP,TW) 1-693-443-11 4-951-620-01 X-4950-953-1 X-4950-978-1 X-4950-979-1 TUNER UNIT (AEP,UK,G,CIS) SCREW (2.6x8), +BVTP PANEL ASSY, LOADING (RXD8S) PANEL ASSY, LOADING (GRX80)(SILVER) PANEL ASSY, LOADING (GRX80)(GRAY)
CASE (SILVER) CASE (GRAY) TUNER UNIT (EA4,TH) ENCAPSULATED COMPONENT (E2,AR,MX,AUS)
X-4950-981-1 PANEL ASSY, LOADING (RXD8)

8-2. CHASSIS SECTION

not supplied #4

#2 (RXD8/RXD8S)

not supplied T11

#2 #2 #2 #2 #2

T951 #3 #3 #3 M901
58 (EA3,SP,MY) 58 (UK) 58 (E3)
(E2,E3,MX,TH) 59 (AEP,UK,G,CIS,SP,MY,HK,TW,EA3,EA4)
#2 not supplied not supplied

59 (AR)

59 (AUS)
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. * * * * 53 Part No. 4-965-822-01 1-672-474-11 A-4417-639-A A-4417-648-A A-4417-652-A A-4417-668-A A-4417-671-A A-4417-676-A 1-783-570-11 1-769-977-11 Description Remark Ref. No. ! 59 * 60 * 61 * 61 * * 61 * 61 * 61 * * * * * 61 Part No. Description Remark
FOOT TRANS BOARD MAIN BOARD, COMPLETE (RXD8/RXD8S) MAIN BOARD, COMPLETE (GRX80:EA3) MAIN BOARD, COMPLETE (GRX80:E3,SP,TW) MAIN BOARD, COMPLETE (GRX80:E2,AR,MX) MAIN BOARD, COMPLETE (GRX80:AUS) MAIN BOARD, COMPLETE (GRX80:EA4,TH) WIRE (FLAT TYPE)(19 CORE) WIRE (FLAT TYPE)(13 CORE) (GRX80:E2,E3,AR,MX,AUS,EA4,TH)

1-783-941-21 CORD, POWER (AR) A-4417-646-A SUB TRANS BOARD, COMPLETE (RXD8/RXD8S) 4-214-451-01 PANEL, BACK (GRX80:E2,AR) (Malaysia PRODUCT) 4-214-451-11 PANEL, BACK (GRX80:EA3) 4-214-451-21 4-214-451-31 4-214-451-41 4-214-451-51 4-214-451-61 4-214-451-71 4-214-451-81 4-214-451-91 4-215-165-01 4-215-165-21 4-215-165-31 4-217-515-21 4-217-515-31 1-773-042-11 1-763-072-11 PANEL, BACK (GRX80:SP) PANEL, BACK (GRX80:MX)(Indonesia PRODUCT) PANEL, BACK (GRX80:MX)(Malaysia PRODUCT) PANEL, BACK (GRX80:AUS) PANEL, BACK (GRX80:TW) PANEL, BACK (GRX80:E2) PANEL, BACK (GRX80:EA4,TH) PANEL, BACK (GRX80:E3) PANEL, BACK (RXD8)(Indonesia PRODUCT) PANEL, BACK (RXD8S) PANEL, BACK (RXD8)(Malaysia PRODUCT) PANEL, BACK (GRX80:E3) PANEL, BACK (GRX80:EA3) WIRE (FLAT TYPE)(17 CORE) FAN, D.C.

* 53 * 53 * 55

* 58 ! 59 ! 59 ! 59 ! 59
1-773-009-11 WIRE (FLAT TYPE)(15 CORE) (150mm) (GRX80:EA3,SP,TW/RXD8/RXD8S) 1-773-024-11 WIRE (FLAT TYPE)(15 CORE) (320mm) 3-703-244-00 BUSHING (2104), CORD (AEP,UK,G,CIS,EA3,SP,AR,TW,AUS) 3-703-571-11 BUSHING (S)(4516), CORD (E2,E3,MX,EA4,TH) 1-569-007-11 ADAPTOR, CONVERSION 2P (E3) 1-569-008-21 1-770-019-11 1-575-651-11 1-575-653-11 1-690-608-11 ADAPTOR, CONVERSION 2P (EA3,SP,TW) ADAPTOR, CONVERSION PLUG 3P (UK) CORD, POWER (AEP,UK,G,CIS,EA3,SP,TW) CORD, POWER (E2,E3,MX,TH) CORD, POWER (AUS)
* 61 * 61 * M901 ! T11 ! T951 ! T951
1-433-591-11 TRANSFORMER, POWER (RXD8/RXD8S) 1-433-556-11 TRANSFORMER, POWER (GRX80) 1-433-557-11 TRANSFORMER, POWER (RXD8/RXD8S)
1-783-721-11 CORD, POWER (EA4)

8-3. FRONT PANEL SECTION

not supplied FL601

117 116

Supplied with S601

109 109

Supplied with S602

105 110

#5 #5 #11 not supplied

TCM230AWR1 TCM230PWR1

Ref. No. 113
Part No. X-4950-697-1 X-4950-976-1 X-4950-698-1 X-4950-977-1 4-214-760-11 4-214-761-11 4-214-775-11 4-214-383-11 4-214-383-51 4-214-384-11 4-214-384-51 4-219-087-01 4-951-620-01 4-210-045-02 4-988-663-01
Ref. No. 113 * * 117 * 118 * 118 * 118 * 119 * 120 * FL601
HOLDER (L) ASSY, CASSETTE (SILVER) HOLDER (L) ASSY, CASSETTE (GRAY) HOLDER (R) ASSY, CASSETTE (SILVER) HOLDER (R) ASSY, CASSETTE (GRAY) CATCHER (A), PUSH CATCHER (B), PUSH SPRING, PUSH CATCHER RETURN KNOB (JOG)(SILVER) KNOB (JOG)(GRAY) KNOB (VOL)(SILVER) KNOB (VOL)(GRAY) SPRING, TENSION SCREW (2.6X8), +BVTP DAMPER FOOT (FELT)

X-4950-701-1 PANEL ASSY, FRONT (GRX80:EA3)(GRAY) X-4950-706-1 PANEL ASSY, FRONT (RXD8/RXD8S) X-4950-980-1 PANEL ASSY, FRONT (GRX80:E3)(GRAY) A-4417-663-A 4-214-385-11 4-214-385-51 1-773-223-11 4-214-439-11 CD SW BOARD, COMPLETE KNOB (MIC)(SILVER) KNOB (MIC)(GRAY) WIRE (FLAT TYPE)(25 CORE) HOLDER, FL TUBE
A-4417-643-A PANEL BOARD, COMPLETE (RXD8/RXD8S) A-4417-650-A PANEL BOARD, COMPLETE (GRX80:EA3) A-4417-660-A PANEL BOARD, COMPLETE (EXCEPT GRX80:EA3/RXD8/RXD8S) 4-214-736-11 HOLDER (L)(LED) 4-214-737-11 HOLDER (R)(LED) 4-214-738-11 INDICATOR (ILLUMINATION 1) 4-951-620-01 SCREW (2.6X8), +BVTP 1-517-831-11 INDICATOR TUBE, FLUORESCENT
4-962-708-71 EMBLEM (4-A), SONY X-4950-696-1 PANEL ASSY, FRONT (GRX80:E2,SP,AR,TW,MX,AUS,EA4,TH)(SILVER)
8-4. CD MECHANISM DECK SECTION-1 (CDM38LH-5BD32L)

206 204

Ref. No. 205 * 206
Part No. 4-981-789-01 4-977-945-01 X-4946-665-1 4-977-943-01 4-977-956-01
Description BRACKET, YOKE TRAY (TURN) SHAFT ASSY, WORM BELT (TURN) (1.2) WHEEL, WORM

Ref. No. * M701

Part No. 4-988-162-01 4-977-941-01 1-658-576-11 4-934-376-01
Description ROLLER BEARING (WORM) SENSOR BOARD SHAFT (ROLLER)
1-658-577-11 MOTOR (TURN) BOARD
4-981-187-01 COLLAR (WORM) 4-977-944-01 TRAY (SLIDE) A-4672-004-A MOTOR ASSY
8-5. CD MECHANISM DECK SECTION-2 (CDM38LH-5BD32L)

251 253

252 255

#7 not supplied

259 266

268 261

BU-5BD32L S811

265 251

Ref. No. * 261 * 262 Part No. 4-917-583-71 4-977-954-01 4-977-953-01 4-977-955-01 4-977-942-01 X-4946-667-1 1-452-925-21 1-776-042-11 1-658-575-11 4-900-743-01 Description BRACKET, YOKE PULLEY (SL) GEAR (SL-A) GEAR (SL-B) BELT (SL) (1.4) CAM ASSY, BU MAGNET ASSY WIRE (FLAT TYPE) (8 CORE) CONNECTOR BOARD SPRING, COMPRESSION Remark Ref. No. * 271 S811 M801 Part No. Description Remark 4-982-447-01 SPRING (BU), COMPRESSION 4-951-620-41 SCREW (2.6), +BVTP X-4949-570-1 HOLDER (BU) ASSY 4-989-494-01 4-989-492-11 4-989-819-02 4-989-491-01 4-993-142-21 SCREW (SLIDER), STEP SLIDER (38) SPRING, TENSION COVER, LENS PULLEY (L), PRESS
4-985-672-01 SCREW (+PTPWHM2.6), FLOATING 1-658-578-11 MOTOR (SLIDE) BOARD
4-900-718-01 BRACKET (ADJUSTMENT) 1-473-335-11 ENCODER, ROTARY A-4672-004-A MOTOR ASSY (SLIDE)
8-6. BASE UNIT SECTION (BU-5BD32L)

309 303

M101 M102

307 308

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. ! 305 Part No. 8-820-020-02 1-769-069-11 4-917-567-01 4-951-940-01 4-917-565-01 Description OPTICAL PICK-UP KSS-213D/Q-NP WIRE (FLAT TYPE) (16 CORE) GEAR (M) INSULATOR (BU) SHAFT, SLED Remark Ref. No. 306 * 309 M101 M102 Part No. 4-917-564-01 A-4724-486-A 4-951-620-01 3-713-786-51 X-4917-523-3 Description GEAR (P), FLATNESS BD BOARD, COMPLETE SCREW (2.6X8), +BVTP SCREW +P 2X3 MOTOR ASSY (SPINDLE) Remark
X-4917-504-1 MOTOR ASSY (SLED)
8-7. TC MECHANISM SECTION-1 (TCM230AWR1/230PWR1)
*NOTE: Two types of parts which are not interchangeable are available for the Head deck (A) ASSY and Head deck (B) ASSY. When replacing the parts, refer to the following figure, and use the appropriate part.
Parts with P mark: 230PWR2 Parts without P mark: 230AWR2

403 407

HRPE101
Ref. No. * 409 Part No. 3-376-464-11 3-911-116-21 3-016-574-11 X-3374-156-4 X-3374-155-4 3-016-564-01 3-016-565-01 3-026-892-01 A-2007-731-A Description SCREW(+PTT 2.6X6),GROUND POINT RIVET, PUSH SPRING (HEAD), TENSION PINCH LEVER (REV) ASSY PINCH LEVER (FWD) ASSY BASE (PINCH LEVER FWD) BASE (PINCH LEVER REV) SPRING (CASSETTE), LEAF AUDIO BOARD, COMPLETE Remark Ref. No. HP101 HP101 Part No. Description Remark
3-016-573-01 LEVER (EJECT PREVENTION R) 3-032-810-02 3-016-572-01 3-032-809-02 A-2056-681-A A-2056-681-B SPRING (R), TORSION LEVER (EJECT PREVENTION L) SPRING (L), TORSION DECK (A) ASSY, HEAD (230AWR2)(*NOTE) DECK (A) ASSY, HEAD (230PWR2)(*NOTE)
HRPE101 A-2056-682-A DECK (B) ASSY, HEAD (230AWR2)(*NOTE) HRPE101 A-2056-682-B DECK (B) ASSY, HEAD (230PWR2)(*NOTE)
8-8. TC MECHANISM SECTION-2 (TCM230AWR1/230PWR1)
*NOTE: Two types of parts which are not interchangeable are available for the mechanical block assembly. When replacing the parts, refer to the following figure, and use the appropriate part. Parts with P mark: 230PWR2 Parts without P mark: 230AWR2

461 451

455 452

459 464

1-216-077-00 1-216-097-91 1-216-077-00 1-216-085-00 1-216-073-00 1-216-049-91 1-216-073-00 1-216-061-00 1-216-121-91 1-216-025-91 1-216-121-91 1-216-121-91 1-216-073-00 1-216-001-00 1-216-049-91 1-216-041-00 1-216-073-00 1-216-097-91 1-216-033-00 1-216-103-00 1-216-103-00 1-216-069-00 1-216-001-00 1-216-001-00 1-216-111-00
METAL CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
15K 100K 15K 33K 10K 1K 10K 3.3K 1M 100 1M 1M 10K 10 1K 470 10K 100K 220 180K 180K 6.8K 390K 150K
5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W

5% 10% 5%

1-216-101-00 METAL CHIP
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
Ref. No. R161 R162 R171 R172 R173 R181 R182 R183 Part No. 1-216-308-00 1-216-101-00 1-216-078-00 1-216-073-00 1-216-077-00 1-216-078-00 1-216-073-00 1-216-077-00 Description METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP < NETWORK > RN101 RN102 1-233-576-11 RES, CHIP NETWORK 100 1-233-576-11 RES, CHIP NETWORK 100 4.7 150K 16K 10K 15K 16K 10K 15K 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W

Ref. No. S807 Part No.

CONNECTOR

LEAF SW

1-762-875-21 SWITCH, KEYBOARD ()
************************************************************** * 1-658-575-11 CONNECTOR BOARD ***************** < CONNECTOR > * CN701 CN702 1-568-946-11 PIN, CONNECTOR 8P 1-750-413-11 CONNECTOR, FFC/FPC 8P < TRANSISTOR > Q701 8-729-900-80 TRANSISTOR DTC114ES < RESISTOR >
< SWITCH > S101 1-572-085-11 SWITCH, LEAF (LIMIT IN SW) < VIBRATOR > X101 1-767-408-21 VIBRATOR, CRYSTAL (16.9344MHz) ************************************************************** ************************************************************** * * A-4417-663-A CD SW BOARD, COMPLETE ********************* < DIODE > C1001 D801 D802 D803 D804 8-719-056-13 DIODE SML79423C-TP15 (DISC 1, DISC IN/PLAY) 8-719-056-13 DIODE SML79423C-TP15 (DISC 2, DISC IN/PLAY) 8-719-056-13 DIODE SML79423C-TP15 (DISC 3, DISC IN/PLAY) 8-719-063-93 DIODE SLR325VC-N-T32 ((STANDBY) POWER SAVE/DEMO) < RESISTOR > R801 R802 R803 R804 R805 R806 R807 R808 R809 R810 R811 R812 R813 R814 1-216-049-91 1-216-051-00 1-216-055-00 1-216-059-00 1-216-061-00 1-216-065-91 1-216-069-00 1-216-022-00 1-216-029-00 1-216-022-00 1-216-029-00 1-216-022-00 1-216-029-00 1-216-043-91 RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP < SWITCH > S801 S802 S803 S804 S805 S806 1-762-875-21 SWITCH, KEYBOARD (1/u) 1-762-875-21 SWITCH, KEYBOARD ((STANDBY) POWER SAVE/DEMO) 1-762-875-21 SWITCH, KEYBOARD (DISC 1) 1-762-875-21 SWITCH, KEYBOARD (DISC 2) 1-762-875-21 SWITCH, KEYBOARD (DISC 3) 1-762-875-21 SWITCH, KEYBOARD (DISC SKIP/EX-CHANGE) 1K 1.2K 1.8K 2.7K 3.3K 4.7K 6.8K 560 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1-107-716-11 ELECT < CONNECTOR > CN1001 1-568-860-11 SOCKET, CONNECTOR 17P CN1001 1-784-459-11 CONNECTOR, FFC/FPC 17P < DIODE > D1001 D1002 8-719-911-19 DIODE 1SS119 8-719-911-19 DIODE 1SS119 < HOLDER > * DM1001 1-784-581-11 HOLDER, CABLE (2.5MM PITCH) 4P < IC > IC1001 IC1002 8-749-014-38 IC PHOTO INTERRUPTER SG-264 8-749-014-38 IC PHOTO INTERRUPTER SG-264 < TRANSISTOR > Q1001 8-729-029-56 TRANSISTOR DTA144ESA < RESISTOR > R907 R1001 R1002 R1003 R1004 R1005 R1006 R1007 R1008 1-247-879-11 1-249-409-11 1-249-409-11 1-249-414-11 1-247-834-11 1-247-818-11 1-247-864-11 1-247-856-00 1-249-417-11 CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON 100K 560 1.3K 300 24K 11K 1K 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W F 1/4W F 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F 33uF 20% 10V A-2007-732-A LEAF SW BOARD, COMPLETE ************************ < CAPACITOR > R703 R704 R705 1-249-435-11 CARBON 1-249-429-11 CARBON 1-249-417-11 CARBON 33K 10K 1K 5% 5% 5% 1/4W 1/4W 1/4W F

CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON < RELAY >
10K 10K 1K 10K 100 1K 100
5% 5% 5% 5% 5% 5% 5% 5% 5%
1/4W 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F 1/4W
************************************************************** * A-4417-646-A SUB TRANS BOARD, COMPLETE (RXD8/RXD8S) ************************** < CAPACITOR > ! T11 C11 C12 C13 C14 C15 C16 ! C21 1-126-768-11 1-161-494-00 1-126-933-11 1-126-968-11 1-164-159-11 ELECT CERAMIC ELECT ELECT CERAMIC 2200uF 0.022uF 100uF 100uF 0.1uF 100uF 0.01uF 20% 20% 20% 16V 25V 16V 50V 50V 35V 250V C971 < CONNECTOR > C972 CN11 1-564-321-00 PIN, CONNECTOR 2P ! RY11
1-755-276-11 RELAY, POWER < TRANSFORMER > 1-433-591-11 TRANSFORMER, POWER
************************************************************** * 1-672-474-11 TRANS BOARD *********** < CAPACITOR > 1-128-563-11 ELECT 1-126-960-11 ELECT 100uF 1uF 20% 20% 100V (GRX80) 50V (GRX80)
1-126-948-11 ELECT 1-113-925-11 CERAMIC

20% 20%

Ref. No. C973 Part No. Description 47uF 20% Remark 35V (GRX80) Ref. No. ! R953 Part No. Description 0.1 Remark 5% 1/4W F (RXD8/RXD8S) 5% 5% 5% 5% 5% 1/4W F (GRX80) 2W F (GRX80) 1/10W (GRX80) 1/10W (GRX80) 1/10W (GRX80) 1/10W (GRX80) 1/10W (GRX80) 1/10W (GRX80) 1-126-947-11 ELECT 1-219-119-81 FUSIBLE
< CONNECTOR > CN901 * CN901 CN902 CN951 1-564-524-11 1-564-527-11 1-785-329-11 1-564-321-00 PLUG, CONNECTOR 9P (RXD8/RXD8S) PLUG, CONNECTOR 12P (GRX80) PIN, CONNECTOR (LIGHT ANGLE) 3P (GRX80) PIN, CONNECTOR 2P (GRX80) < DIODE >
! R953 R971 R972 R973 R974
1-219-120-11 FUSIBLE 1-216-455-11 METAL OXIDE 1-216-085-00 METAL CHIP 1-216-073-00 METAL CHIP 1-216-025-91 RES,CHIP

0.33K 10K 100

D971 D972 D973
8-719-024-99 DIODE 11ES2-NTA2B (GRX80) 8-719-056-97 DIODE UDZ-TE-17-27B (GRX80) 8-719-056-74 DIODE UDZ-TE-17-3.0B (GRX80) < FUSE >

R975 R976 R977

1-216-025-91 RES,CHIP 1-216-085-00 METAL CHIP 1-216-085-00 METAL CHIP

100 33K 33K

5% 5% 5%
! F951 ! F952 ! F953 ! F961 ! F962 ! F963 ! F964
1-532-506-31 FUSE (T6.3AL/250V) (GRX80:E2,E3,EA3,SP,AR,TW,MX) 1-532-465-31 FUSE (3.15A/250V) (GRX80:E2,E3,EA3,SP,AR,TW,AUS,EA4,TH) 1-532-465-31 FUSE (3.15A/250V) (GRX80:E2,E3,EA3,SP,AR,TW,AUS,EA4,TH) 1-532-505-31 FUSE (T5AL/250V)(GRX80) 1-532-505-31 FUSE (T5AL/250V)(GRX80) 1-533-949-31 FUSE, CYLINDRICAL (T8AL/250V)(RXD8/RXD8S) 1-533-949-31 FUSE, CYLINDRICAL (T8AL/250V)(RXD8/RXD8S) < FUSE HOLDER >

< SWITCH > S951 1-771-291-11 SWITCH, POWER (VOLTAGE SELECTOR) (GRX80:E2,E3,EA3,SP,AR,TW) < TRANSFORMER > ! T951 ! T951 1-433-556-11 TRANSFORMER, POWER (GRX80) 1-433-557-11 TRANSFORMER, POWER (RXD8/RXD8S)
************************************************************** FH951 FH952 FH953 FH954 FH955 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,MX) 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,MX) 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,EA4,TH) 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,EA4,TH) 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,AUS) 1-533-233-21 HOLDER, FUSE (GRX80:E2,E3,EA3,SP,AR,TW,AUS) 1-533-233-21 HOLDER, FUSE (GRX80) 1-533-233-21 HOLDER, FUSE (GRX80) 1-533-233-21 HOLDER, FUSE (GRX80) 1-533-233-21 HOLDER, FUSE (GRX80) 1-533-233-21 1-533-233-21 1-533-233-21 1-533-233-21 HOLDER, FUSE (RXD8/RXD8S) HOLDER, FUSE (RXD8/RXD8S) HOLDER, FUSE (RXD8/RXD8S) HOLDER, FUSE (RXD8/RXD8S) < TRANSISTOR > Q971 8-729-048-52 TRANSISTOR 2SA1932(TP)(GRX80) < RESISTOR > ! R951 ! R951 ! R952 ! R952 1-219-120-11 FUSIBLE 1-219-122-91 FUSIBLE 1-219-120-11 FUSIBLE 1-219-122-91 FUSIBLE 0.15 0.33 0.15 0.33 1/4W F (GRX80) 5% 1/4W F (RXD8/RXD8S) 5% 1/4W F (GRX80) 5% 1/4W F (RXD8/RXD8S) 5% ! FL601 HP101 HP101 8-820-020-02 1-769-069-11 1-517-831-11 A-2056-681-A A-2056-681-B OPTICAL PICK-UP KSS-213D/Q-NP WIRE (FLAT TYPE) (16 CORE) INDICATOR TUBE, FLUORESCENT DECK (A) ASSY, HEAD (230AWR2) DECK (A) ASSY, HEAD (230PWR2) MISCELLANEOUS ************* 58 ! 59 ! 59 ! 59 ! 59 ! 258 1-233-545-11 1-233-545-14 1-233-546-13 1-693-443-11 1-783-570-11 1-769-977-11 1-773-009-11 1-773-024-11 1-569-007-11 1-569-008-21 1-770-019-11 1-575-651-11 1-575-653-11 1-690-608-11 1-783-721-11 1-783-941-21 1-773-042-11 1-773-223-11 1-452-925-21 1-776-042-11 TUNER UNIT (EA4,TH) ENCAPSULATED COMPONENT (E2,AR,MX,AUS) ENCAPSULATED COMPONENT (E3,EA3,SP,TW) TUNER UNIT (AEP,UK,G,CIS) WIRE (FLAT TYPE)(19 CORE) WIRE (FLAT TYPE)(13 CORE) WIRE (FLAT TYPE)(15 CORE)(150mm) WIRE (FLAT TYPE)(15 CORE)(320mm) ADAPTOR, CONVERSION 2P (E3) ADAPTOR, CONVERSION 2P (EA3,SP,TW) ADAPTOR, CONVERSION PLUG 3P (UK) CORD, POWER (AEP,UK,G,CIS,EA3,SP,TW) CORD, POWER (E2,E3,MX,TH) CORD, POWER (AUS) CORD, POWER (EA4) CORD, POWER (GRX80:AR) WIRE (FLAT TYPE)(17 CORE) WIRE (FLAT TYPE)(25 CORE) MAGNET ASSY WIRE (FLAT TYPE) (8 CORE)
FH956 FH961 FH962 FH963 FH964 FH965 FH966 FH967 FH968
HRPE101 A-2056-682-A DECK (B) ASSY, HEAD (230AWR2) HRPE101 A-2056-682-B DECK (B) ASSY, HEAD (230PWR2)