MHC-GRX9900/RXD9

SERVICE MANUAL
MHC-GRX9900/RXD9 are composed of following models. As for the service manual, it is issued for each component model, then, please refer to it.
US Model AEP Model UK Model

MHC-RXD9

E Model

MHC-GRX9900

COMPONENTS MODEL NAME FOR MHC-GRX9900/RXD9
MHC-GRX9900 EXCEPT E, EA COMPACT DISC DECK RECEIVER SYSTEM SPEAKER SYSTEM E, EA MHC-RXD9 HCD-RXD9 SS-RXD9
HCD-GRX9900 SS-GRX9900 SS-GRX9900G
PARTS LIST(ACCESSORIES & PACKING MATERIALS)
Part No. 1-475-572-11 1-475-572-41 1-501-374-11 1-501-659-41 1-501-804-11 1-558-848-11 3-865-601-11 3-865-601-21 3-865-601-31 3-865-601-41 3-865-601-51 3-865-601-61 3-865-601-71 3-865-601-81 3-865-601-91 3-865-602-11 3-865-603-11 3-865-603-21 3-865-603-31 3-865-603-41 Description COMMANDER, STANDARD (RM-SR5)(SILVER) COMMANDER, STANDARD (RM-SR5B)(BLACK) ANTENNA,LOOP(AM) ANTENNA (FM) (US, CIS ,E) ANTENNA (FM) (AEP, UK, G, AED) CORD, SPEAKER (3m) MANUAL, INSTRUCTION (ENGLISH) MANUAL, INSTRUCTION (FRENCH) (EA) MANUAL, INSTRUCTION (SPANISH) (MX, AR) MANUAL, INSTRUCTION (FRENCH, SPANISH) (AEP, E, MY, SP) MANUAL, INSTRUCTION (CHINESE) MANUAL, INSTRUCTION (ARABIC) MANUAL, INSTRUCTION (GERMAN) MANUAL, INSTRUCTION (DUTCH, ITALIAN, PORTUGUESE) MANUAL, INSTRUCTION (POLISH, RUSSIAN) MANUAL, INSTRUCTION (DANISH, FINNISH, SWEDISH) MANUAL, INSTRUCTION (CZECH) MANUAL, INSTRUCTION (HUNGARIAN) MANUAL, INSTRUCTION (TURKISH) MANUAL, INSTRUCTION (GREEK)
Abbreviation AED : North European AR : Argentine EA : Saudi Arabia G : German MX : Mexican MY : Malaysia SP : Singapore
3-866-397-21 MANUAL, INSTRUCTION (ENGLISH, FRENCH, SPANISH, GERMAN, SWEDISH, RUSSIAN) (FOR SS-RXD9 : AEP, UK) 4-210-254-01 CUSHION (FOOT) (FOR SPEAKER) 4-991-151-21 COVER, BATTERY (FOR RM-SR5) (SILVER) 4-991-151-41 COVER, BATTERY (FOR RM-SR5B) (BLACK)
MINI Hi-Fi COMPONENT SYSTEM

MICROFILM

Sony Corporation

9-928-865-11

Home Audio Company
99D001682-1 Printed in Japan 1999.4 Published by Quality Assurance Dept.

http://getMANUAL.com

HCD-GRX9900/RXD9

SERVICE MANUAL

US Model AEP Model UK Model

HCD-RXD9

E Model

HCD-GRX9900

HCD-GRX9900/RDX9 are the Amplifier, CD player, Tape Deck and Tuner section in MHC-GRX9900/RXD9.
Photo: HCD-RXD9 (US model)
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism CD Section CD Mechanism Type Base Unit Name Optical Pick-up Name Tape deck Section Model Name Using Similar Mechanism Tape Transport Mechanism Type
NEW CDM38LH-5BD32L BU-5BD32L KSS-213D/Q-NP NEW TCM-230AWR2

SPECIFICATIONS

Amplifier section US model: E models: The following measured at AC 120, 220, 240 V 50/60 Hz DIN power output (rated) 200 + 200 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 250 + 250 watts (6 ohms at 1 kHz, 10% THD) Continued on next page
AEP and UK models: DIN power output (rated)
120 + 120 watts (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 150 + 150 watts (8 ohms at 1 kHz, 10% THD) Music power output (reference) 275 + 275 watts (8 ohms at 1 kHz, 10% THD)
MINI Hi-Fi COMPONENT SYSTEM

MICROFILM

Specifications (continued)
Inputs MD/VIDEO (AUDIO) IN: (phono jacks) MIX MIC: (phone jack) voltage 450 mV/250mV, impedance 47 kilohms sensitivity 1 mV, impedance 10 kilohms
3 Band type: Saudi Arabia model: MW: SW: Other models: MW:
531 - 1,602 kHz (with the interval set at 9 kHz) 5.95 - 17.90 MHz (with the interval set at 5 kHz) 531 - 1,602 kHz (with the interval set at 9 kHz) 530 - 1,710 kHz (with the interval set at 10 kHz) 5.95 - 17.90 MHz (with the interval set at 5 kHz) AM loop antenna External antenna terminal 450 kHz
Outputs MD OUT: voltage 250 mV, (phono jacks) impedance 1 kilohms PHONES: accepts headphones of 8 ohms (stereo phone jack) or more SPEAKER: E models: accepts impedance of 6 to 16 ohms Other models: accepts impedance of 8 to 16 ohms SUPER WOOFER (GRX9900/RXD9: US models): Voltage 1 V, impedance 1 kilohm CD player section System Laser Laser output
SW: Antenna Antenna terminals Intermediate frequency
Frequency response Wavelength Signal-to-noise ratio Dynamic range CD OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 600 nm Output Level -18 dBm Tape player section Recording system Frequency response (DOLBY NR OFF)
Compact disc and digital audio system Semiconductor laser (=780nm) Emission duration: continuous Max. 44.6 W* *This output is the value measured at distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 2 Hz - 20 kHz (0.5 dB) 780 -790 nm More than 90 dB More than 90 dB
General Power requirements US model: AEP and UK models: Mexican model: Other models:
120 V AC, 60 Hz 230 V AC, 50/60 Hz 120 V AC, 50/60 Hz 120 V, 220 V, or 230 - 240 V AC, 50/60 Hz Adjustable with voltage selector
Power consumption US model: AEP and UK models: Other models: Dimensions (w/h/d)
170 watts 180 watts 240 watts Approx. 395 mm (131/8 141/4 155/8 in.)
4-track 2-channel stereo 40 - 13,000 Hz (3 dB), using Sony TYPE I cassette 40 - 14,000 Hz (3 dB), using Sony TYPE II cassette
Mass US model: AEP and UK models: Other models: Supplied accessories:
Tuner section FM stereo, FM/AM superheterodyne tuner
Approx. 10.6 kg (23 lb 6 oz.) Approx. 10.8 kg Approx. 12.2 kg AM loop antenna (1) Remote Commander (1) Batteries (2) FM lead antenna (1) Speaker cords (2) Front speaker pads (8)
Design and specifications are subject to change without notice.
FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency
87.5 - 108.0 MHz FM lead antenna 75 ohm unbalanced 10.7 MHz

MODEL Argentine and 120 V AC Area in E models Saudi Arabia model Singapore and Malaysia models Mexican model AEP, UK, German and North European models CIS model US model 240 V AC Area in E model
PART No. 4-214-457-0 4-214-457-1 4-214-457-2 4-214-457-3 4-214-457-5 4-214-457-6 4-214-457-7 4-214-457-8
HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF.
1 Remove the Cover. (Refer to page 8)
3 Pull-out the disc tray. 2 Turn the cam to the direction of arrow.
NOTE FOR INSTALLATION (ROTARY ENCODER)
BU cam Note:When attaching the Base unit, Insert the section A into the groove of BU cam.

Section A Groove

Note:When attaching the BU cam, engage the Rotary encoder switch as shown in the figure.

SECTION 2 GENERAL

LOCATION OF CONTOROLS Front Panel
This section is extracted from instruction manual.
Rear Panel CD DIGITAL OUT terminal 2 VIDEO (AUDIO) IN jack 3 FM COAXIAL ANTENNA terminal (RXD9: AEP and UK models) FM ANTENNA terminal (GRX9900/RXD9: US models) 4 MD IN/OUT jack 5 SUPER WOOFER jack (GRX9900/RXD9: US models) 6 SPEAKER terminal 7 AM ANTENNA terminal 8 VOLTAGE SELECTOR switch (GRX9900: 120 V AC Area in E, 240 V AC Area in E, Saudi Arabia, Singapore, Malaysia, Argentine models)

SECTION 3 DISASSEMBLY

Note: Follow the disassembly procedure in the numerical order given.
6 case 2 screw (case3 TP2) (3 12) 1 five screws (BVTT3 8)
3 two screws (case3 TP2) (3 8) 5 4
2 screw (case3 TP2) (3 12)
3 two screws (case3 TP2) (3 8)

LOADING PANEL ASSY

3 loading panel assy
A 1 Turn the cam-in the direction of the arrow A. 2 Pull-out the disc tray.

FRONT PANEL SECTION

1 wire (flat type) (15 core) (32 cm) (CN303)
5 screw (BVTT3 10) 4 lug 2 screw (BVTT2.6 5) 7 front panel section

5 screw (BVTP3 10)

4 lug 3 two washers
2 screw (BVTT2.6 5) 1 wire (flat type) (23 core) (CN501) 6 three screws (BVTT3 6) 1 wire (flat type) (17 core) (CN304)
CD MECHANISM DECK SECTION (CDM38LH-5BD32L)

Notes: Always move the optical pick-up to most inside track when exiting from this mode. Otherwise, a disc will not be unloaded. Do not run the sled motor excessively, otherwise the gear can be chipped.
[Aging Mode] This mode can be used for operation check of CD section and tape deck section. CD section and tape deck section work in parallel. If an error occurred: The aging operation stops only an error occurred sections and display then status. If no error occurs: The aging operation continues repeatedly. Procedure: 1. Set disc in DISC1 tray. 2. Load the tapes into the decks A and B respectively. 3. Press the [PLAYMODE] button to set the ALL DISCS mode, and press the [REPEAT] button to REPEAT off. 4. Press the [FUNCTION] button to select the function CD. 5. Press three buttons of p , [ENTER/NEXT], and [DISCSKIP/ EX-CHANGE] simultaneously. 6. The aging mode is activated, if the indicator of disc tray number on the fluorescent indicator tube is blinking. 7. To exit from the aging mode, press the 1/u button to turn the power OFF and operate the cold reset. (Refer to the MC Cold Reset) 1. Display at the Aging Mode Display operating state of CD section and tape deck section alternately. If an error occurred, stop display which that section. 2. CD Section Display at the aging mode is the same as the normal operation. The sequence during the aging mode is following as below. Aging mode sequence (CD section) :
Display at an error occurred 1) Display of the error count (1) Press three buttons of p , [ENTER/NEXT], and [CDSYNC] simultaneously. (2) Display of the error count following as below. Display

EMC**EDC**

Notes: EMC**: The number of mechanical error. EDC** : The number of no disc error after chucking the disc.
2) Display of mechanical error Display

E**M##$$&&

Notes: ** : The number of mechanical error.(00 is latest one) (Press the [PLAYMODE] button to changes next error display) ## : Not used. $$ : Loading error. (Second figure is not used) D : The error in the midst of close at the except mechanical trouble. E : The error in the midst of open at the except mechanical trouble. C : The error in the midst of chuck up at the except mechanical trouble. F : The error in the midst of EX-open at the except mechanical trouble. &&: Loading error. (Second figure in not used) 1:The error in the midst of chuck up. 2:The error in the midst of chuck down. 3:Time up of EX-open 4:Time up of EX-close.

Turn the disc tray

3) Display of no disc error

Disc1 chucking

Display

TOC read

E**D##$$&&
Notes: ** : The number of mechanical error.(00 is latest one) (Press the [REPEAT] button to changes next error display) ##: 01: Focus error 02: GFS error 03: Set up error $$: 00: No disc error when does not chucking retry. 02: No disc error when chucking retry to completion. &&: The state when judged no disc error. (Second figure is not used) 1:Stop 2:Set up 3:TOC read 4:Access 5:Play 6:Pause 7:Manual search (Play) 8:Manual search (Pause)
Play track1 for 2 seconds
Play last track for 2 seconds
3. Tape Deck Section The sequence during the aging mode is following as below. If an error occurred, stop display that step. Aging mode sequence (Tape deck section) :
Rewind the tape A and B TAPE A AG-1 Shut off FWD play the tape A TAPE A AG-minutes Fast forward the tape A TAPE A AG-3 Shut off or 20 seconds REV play the tape A TAPE A AG-minutes Rewind the tape A TAPE A AG-5 Shut off FWD play the tape B TAPE B AG-minutes Fast forward the tape B TAPE B AG-3 Shut off or 20 seconds REV play the tape B TAPE A AG-minutes Rewind the tape B TAPE B AG-5 Shut off
Note: TAPE * AG-* is display of each step.
SECTION 5 MECHANICAL ADJUSTMENTS
Precaution 1. Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers 2. Demagnetize the record/playback head with a head demagnetizer. 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage unless otherwise noted. Torque Measurement
Mode FWD FWD back tension REV REV back tension FF/REW FWD tension REV tension Torque meter CQ-102C CQ-102C CQ-102RC CQ-102RC CQ-201B CQ-403A CQ-403R Meter reading 31 to 71 g cm (0.43 0.98 oz inch) 2 to 6 g cm (0.03 0.08 oz inch) 31 to 71 g cm (0.43 0.98 oz inch) 2 to 6 g cm (0.03 0.08 oz inch) 71 to 143 g cm (0.99 1.99 oz inch) 100 g or more (3.53 oz or more) 100 g or more (3.53 oz or more)
SECTION 6 ELECTRICAL ADJUSTMENTS

DECK SECTION

0 dB=0.775 V
1. Demagnetize the record/playback head with a head demagnetizer. 2. Do not use a magnetized screwdriver for the adjustments. 3. After the adjustments, apply suitable locking compound to the parts adjust. 4. The adjustments should be performed with the rated power supply voltage unless otherwise noted. 5. The adjustments should be performed in the order given in this service manual. (As a general rule, playback circuit adjustment should be completed before performing recording circuit adjustment.) 6. The adjustments should be performed for both L-CH and RCH. 7. Switches and controls should be set as follows unless otherwise specified. 8. Set to the DOLBY NR OFF. 9. Set to the test mode. (1) Press the 1/u button to turn the power ON. (2) Select the function TAPE A or B. (3) Press the button of p , [ENTER/NEXT], and [DISC3] simultaneously, to set the tape deck test mode and blink the indicator of disc tray number on the fluorescent indicator tube. (4) To exit from the test mode, press the 1/u button. Test Tape

ERROR CORRECTOR

SERIAL IN INTERFACE

DIGITAL FILTER, NOISE SHAPER

PWM & INTEGRATOR

AOUT1 AOUT2

AIN1 AIN2 BUFFER

LOUT1 LOUT2

(Page 23)

F 10 10
F I-V AMP DIGITAL CLV SUBCODE PROCESSOR SERVO AUTO SEQUENCER SERVO INTERFACE DIGITAL OUT EMPH WFCK GFS SQSO SQCK DOUT SCLK COUT SSTP TO MIRR/DFCT/ FOK DETECTOR CLOCK GENERATOR XTAI TIMING LOGIC XTAO X101 16.9344MHz

E 6 11

E I-V AMP

TRACKING ERROR AMP

CPU INTERFACE XLON HOLD SW OPTICAL PICK-UP (KSS-213D/Q-NP) LASER DIODE AUTOMATIC POWER CONTROL Q101 LD LDON XRST SCOR 20 DATA XLAT CLOK 7 SENS 8 MDP S101 (LIMIT) ON : When the optical pick-up is inner position.
60 IC381 CD DIGITALOUT OPTICAL OPTICAL TRANSCEIVER IC381

APC LD AMP

APC PD AMP
FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE IC102
33 SQ-CLK 32 SQ-DATA 19 SCOR

DISC-SENS 60

LEVEL SHIFT Q701
DISC IN DETECT SENSOR IC703

M101 (SPINDLE)

CH4OUTF CH4OUTR MOTOR DRIVE CH4SIN 25
56 SENSE 37 CD-CLK 58 XLT 35 CD-DATA 57 HOLD S801 (OPEN/CLOSE DET) CLOSE DIGITAL SERVO PROCESSOR IC101 (2/2) OUT-OPEN 71 SYSTEM CONTROLLER (CD MECHANISM CONTROL) IC501 (1/4) ENCENCENCFOK 24 MIRR 22 DFCT 23 LOAD-OUT 66 LOAD-IN TO SERVO INTERFACE XRST TBL-L 63 TBL-R 65 DISC TRAY TURN MOTOR DRIVE IC6 IN1 IN2 OUT1 OUT3 ROTARY ENCODER S811 OPEN TBL-SENS 61 DISC TRAY SENSOR IC702
TE FE RFDC A/D CONVERTER SE M102 (SLED)
CH3OUTF CH3OUTR MOTOR DRIVE

CH3FIN CH3RIN

FOCUS/TRACKING/SLED PWM GENERATOR
2-AXIS DEVICE (FOCUS) (TRACKING)
11 CH2OUTF CH2OUTR CH2FIN COIL DRIVE CH2RIN CH1OUTF CH1OUTR COIL DRIVE CH1FIN CH1RIN 2

SRDR TFDR TRDR FFDR FRDR

FOCUS/TRACKING/SLED SERVO DSP

DISC TRAY ADDRESS DETECT

MIRR/DFCT/ FOK DETECTOR
DISC TRAY SLIDE MOTOR DRIVE IC2 FIN RIN MOTOR DRIVE OUT1 OUT4

M801 (DISC TRAY SLIDE)

MUTE 20 05

MOTOR DRIVE

M701 (DISC TRAY TURN)
SIGNAL PATH : CD PLAY (ANALOG OUT) : CD PLAY (DIGITAL OUT)
BLOCK DIAGRAM TAPE DECK Section
DECK PROCESS DECK A/B SELECT, PB/REC EQ AMP, DOLBY NR AMP, ALC, AMS IC301 HP101 (PLAYBACK) L-CH PB EQ AMP (DECK A) IC611 RV311 R-CH R-CH PB LEVEL (L) (DECK A) AIN (L) BIN (L) 120 R-CH DOLBY PASS 70 DOLBY NR AMP CIRCUIT PB OUT (L) 40 PB-L
SIGNAL PATH : PLAYBACK (DECK A) : PLAYBACK (DECK B) : RECORD
REC OUT (L) L.P.F. ROUT (L) ALC RIN (L) ALC (L) ALC IN (L) EQ IN (L) REC EQ AMP EQ OUT (L) 36
HRPE101 (1/2) (RECORD/PLAYBACK) L-CH
31 PB EQ AMP (DECK B) IC601 RV301 PB LEVEL (L) (DECK B)
BIAS (N) BIAS (C) BIAS (M)

BIAS CONTROL CIRCUIT

BUFFER MAOUT MSIN AMS CIRCUIT MSOUT 26
A 120/70 B NORM/CROM ALC ON/OFF PB A/B NORM/HIGH BIAS ON/OFF RM ON/OFF NR ON/OFF REC/PB/PASS LM ON/OFF
RV301 REC LEVEL (L) (DECK B) REC-L

Circuit Boards Location

TRANS board
Note on Printed Wiring Board: X : parts extracted from the component side. Y : parts extracted from the conductor side. p : parts mounted on the conductor side. : internal component. b : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.) Caution: Pattern face side: (Side B) Parts face side: (Side A)

SUB TRANS board (RXD9)

CD SW board

TUNER PACK

Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated.
Indication of transisitor.
Q B C E These are omitted.

MAIN board PANEL board

C Q B E These are omitted.
MOTOR (TURN) board SENSOR board BD board CONNECTOR board

MOTOR (SLIDE) board

AUDIO board

LEAF SW board

PRINTED WIRING BOARD BD Board
See page 28 for Circuit Boards Location.

TP(GND)

TP(VC)

TP(RF)

TP (AGCCON)

TP(FE) TP(TE) TP(FE1)

(Page 43)

21 , , 31

Semiconductor Location (Side A)
Ref. No. Q101 Location C-3

KSS-213D/Q-NP

Semiconductor Location (Side B)
Ref. No. IC101 IC102 IC103 Location C-2 B-1 B-1
7-7. SCHEMATIC DIAGRAM BD Board
See page 65 for Waveforms. See page 66 for IC Block Diagrams.

(Page 45)

Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : CD STOP ( ) : CD PLAY
The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
7-8. PRINTED WIRING BOARDS CD MOTOR Section
See page 28 for IC Circuit Boards Location.

DISC TRAY SLIDE

DISC TRAY TURN

1-658-577-

(DISC TRAY ADDRESS DETECT)
7-9. SCHEMATIC DIAGRAM CD MOTOR Section
See page 67 for IC Block Diagrams.

CLOSE OPEN

MTZJ-T-72

(DISC TRAY SLIDE)

DISC TRAY TURN DISC IN DETECT SENSOR DISC TRAY SENSOR
DISC TRAY TURN MOTOR DRIVER

LEVEL SHIFT

Voltages are dc with respect to ground under no-signal conditions. no mark : CD STOP
PRINTED WIRING BOARD AUDIO Board
SCHEMATIC DIAGRAM AUDIO Board
See page 68 for IC Block Diagram.

(PLAYBACK)

PB EQ AMP (DECK A)

PB LEVEL (L) (DECK A)

PB LEVEL (R) (DECK A)

PB EQ AMP (DECK B)

7-17. SCHEMATIC DIAGRAM MAIN Board (3/4)

(Page 46) (Page 47)

(Page 51)

(Page 62)

(Page 64)

(Page 58)

(Page 40)
(Page 42) Voltages are dc with respect to ground under nosignal (detuned) conditions. no mark : TUNER (FM/AM) ( ) : CD PLAY { } : TAPE PLAYBACK (DECK A) [ ] : TAPE PLAYBACK (DECK B) : RECORD
SCHEMATIC DIAGRAM MAIN Board (4/4)
See page 65 for Waveforms.
Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM) ( ) : CD PLAY { } : TAPE PLAYBACK (DECK A) [ ] : TAPE PLAYBACK (DECK B) : RECOARD

(Page 48)

Ref. No. D601 D608 D609 D611 D612 D613 D614 D615 D619 D620 D621 D622 D623 D624 D625 D626 D631 D632 D633 D634 D636 IC601 IC602 IC603 IC604 IC711 IC712 Q601 Q602 Q603 Q604 Q605 Q607 Q608 Q610 Q611 Q612 Q613 Q614 Q615 Q616 Q620 Location F-6 C-9 C-2 C-6 C-7 C-5 C-4 E-4 D-3 E-1 G-6 G-4 G-7 E-5 E-4 E-7 D-6 D-5 D-8 D-7 F-8 B-5 B-9 B-7 F-5 E-8 G-8 F-6 F-6 F-6 A-10 A-10 B-2 C-9 B-7 B-7 B-7 B-7 B-7 B-8 B-8 A-10
PRINTED WIRING BOARDS PANEL/CD SW Board
Ref. No. D801 D802 D803 D804 Location A-7 A-6 A-4 A-10
7-20. SCHEMATIC DIAGRAM PANEL (1/3)/CD SW Board See page 68 for IC Block Diagrams.

(Page 59)

(Page 57)
Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM)
7-21. SCHEMATIC DIAGRAM PANEL (2/3) Board See page 65 for waveform.

(Page 50) (Page 56)

(Page 60)
SCHEMATIC DIAGRAM PANEL (3/3) Board
See page 68 for IC Block Diagrams.

(Page 55)

7-23. PRINTED WIRING BOARD TRANS Board See page 28 for Circuit Boards Location. 7-24. SCHEMATIC DIAGRAM TRANS Board
Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
Ref. No. D971 D972 D973 (Page 43) (Page 43) Q971 Location G-2 G-1 G-1 G-1
7-25. PRINTED WIRING BOARD SUB TRANS Board (RXD9) See page 28 for Circuit Boards Location.
7-26. SCHEMATIC DIAGRAM SUB TRANS Board (RXD9)
Ref. No. D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 IC11 Q11 Q12 Q13 Q14 Q15 Q16 Q17 Location C-2 C-2 C-1 C-2 C-2 E-3 D-2 D-2 D-2 D-2 D-2 D-1 D-1 D-3 E-2 D-2 D-2 D-1 D-1 D-1 D-1

*2 Disc tray slide motor (M801) control Mode Clockwise H L Brake L L Terminal LOAD-OUT (pin ^) LOAD-IN (pin ^) Stop L L Table In L H Table Out H L Brake H H
*1 Disc tray turn motor (M701) control Mode Terminal TBL-L (pin ^) TBL-R (pin ^) Stop H H Counterclockwise L H

Pin No. 100

Pin Name CAPM-CNT2 CAPM-CNT1 CAP-M-H/L AMS-IN TC-MUTE R/P-PASS NR-ON/OFF REC-MUTE BIAS EQ-H/N PB-A/B ALC-ON/OFF B-PLAY-SW A-PLAY-SW A-HALF B-HALF B-SHUT A-SHUT SOFT-TEST HEADPHONE MUTE KEY/CD ADJ MODEL-IN AVSS SPEC-IN AVREF AVCC TC-RELAY
I/O O O O I O O O O O O O O I I I I I I O O I I I I O
Description Capstan motor (M1) drive signal output terminal H active *3 Capstan motor (M1) drive signal output terminal H active *3 High/normal speed selection signal output of the capstan motor (M1) L: normal speed, H: high speed Whether a music is present or not from HA12215F (IC301) is detected at automatic music sensor L: music is present, H: music is not present Line muting on/off selection signal output to the HA12215F (IC301) L: muting off, H: muting on Recording/playback/pass selection signal output to the HA12215F (IC301) L: recording mode, H: pass, Hi-z: playback mode Dolby NR on/off selection signal output to the HA12215F (IC301) L: dolby off, H: dolby on Recording muting on/off selection signal output to the HA12215F (IC301) L: muting on, H: muting off Recording bias on/off selection signal output to the HA12215F (IC301) L: bias off, H: bias on Normal/high speed selection signal output to the HA12215F (IC301) L: normal speed, H: high speed Deck-A/B selection signal output to the HA12215F (IC301) L: deck-A, H: deck-B Automatic limiter control signal output to the HA12215F (IC301) L: limiter on Detection input from the deck- B play detect switch (S1002) H: deck-B play Detection input from the deck- A play detect switch (S1001) H: deck-A play Detection input from the deck-A cassette detect switch (S1003) L: cassette in, H: no cassette Detection input from the deck-B half detect switch (S1006) Shut off detection signal input from the deck-B side reel pulse detector (IC1002) Shut off detection signal input from the deck-A side reel pulse detector (IC1001) Output terminal for the software test (open) Muting on/off control signal output terminal L: muting on Not used (open) Setting terminal for the CD adjustment mode Not used (open) Destination setting terminal Ground terminal (for A/D conversion) Setting terminal for the version Reference voltage (+5V) input terminal (for A/D conversion) Power supply terminal (+5V) (for A/D conversion) Recording/playback select signal output to the REC/PB switch (IC602) L: playback, H: recording

*3 Capstan motor (M1) control Mode Terminal CAPM-CNT1 (pin &) CAPM-CNT2 (pin &) Stop L L Forward Direction L H Reverse Direction H L Brake H H
PANEL BOARD IC601 TMP88CS76F-6004 (FLUORESCENT INDICATOR TUBE DRIVER, KEY CONTROL) Pin No. 11 Pin Name SIRCS JOG-A LED SCK LED LAT LED DATA PAD LAT L SEL JOG-B VOL-A VOL-B KEY0 I/O I I O O O O O I I I I Description Remote control signal input from the remote control receiver (IC602) Jog dial pulse input from the rotary encoder (S601 JOG) (A phase input) Serial data transfer clock signal output to the LED driver (IC604) Serial data latch pulse signal output to the LED driver (IC604) Serial data output to the LED driver (IC604) Not used (open) LED selection signal output terminal Jog dial pulse input from the rotary encoder (S601 JOG) (B phase input) Jog dial pulse input from the rotary encoder (S602 VOLUME) (A phase input) Jog dial pulse input from the rotary encoder (S602 VOLUME) (B phase input) Key input terminal (A/D input) (S625 to S630) REC PAUSE/START, HI-DUB, CD SYNC, LOOP, DISPLAY, SPECTRUM ANALYZER keys input Key input terminal (A/D input) (S611 to S624) SYNC BASS, SYNC EQ, KARAOKE PON/MPX, NON-STOP, SURROUND, DBFB, ENTER/NEXT, + ), 0, GROOVE, FLASH, REPEAT STEREO/MONO, PLAY MODE DOLBY NR, EDIT DIRECTION TUNER MEMORY keys input Key input terminal (A/D input) (S637 to S641 and S801 to S807) TIMER SELECT, P FILE MEMORY, GEQ CONTROL, FILE SELECT, EFFECT, I/u, (STANDBY) POWER SAVE DEMO, DISC 1/2/3, DISC SKIP EX-CHANGE, keys input Key input terminal (A/D input) (S642 to S650) TUNER/BAND, ( P CD, p, ( TAPE B, 9 TAPE B, ( TAPE A, 9 TAPE A, FUNCTION, CLOCK/TIMER SET keys input LED drive signal output for the left side illumination display (D608) H: LED on Spectrum analyzer drive (super low frequency) signal input from the spectrum analyzer bandpass filter (IC603) (for 40 Hz) Spectrum analyzer drive (low frequency) signal input from the spectrum analyzer band-pass filter (IC603) (for 100 Hz) Spectrum analyzer drive (low and middle frequency) signal input from the spectrum analyzer band-pass filter (IC603) (for 400 Hz) Spectrum analyzer drive (middle and high frequency) signal input from the spectrum analyzer band-pass filter (IC603) (for 2 kHz) Spectrum analyzer drive (high frequency) signal input from the spectrum analyzer band-pass filter (IC603) (for 6 kHz) Spectrum analyzer drive signal input from the spectrum analyzer band-pass filter (IC603) (for VACS, non-stop signal) LED drive signal output for the right side illumination display (D609) H: LED on Wakeup control signal output to the system controller (IC501) H active Ground terminal Ground terminal (for A/D conversion) Reference voltage (+5V) input terminal (for A/D conversion) Power supply terminal (+5V) Grid drive signal output to the fluorescent indicator tube (FL601) Grid drive signal output to the fluorescent indicator tube (FL601) Power supply terminal (+5V) Grid drive signal output to the fluorescent indicator tube (FL601) Grid drive signal output to the fluorescent indicator tube (FL601) Segment drive signal output to the fluorescent indicator tube (FL601)

< VARIABLE RESISTOR > RV301 RV351 1-238-600-11 RES, ADJ, CARBON 10K 1-238-600-11 RES, ADJ, CARBON 10K < RELAY > RY401 1-755-168-11 RELAY < THERMISTOR > TH831 1-807-796-11 THERMISTOR < TERMINAL > TM401 TM401 1-537-240-31 TERMINAL BOARD (CHECKER PIN) (SPEAKER) (GRX9900/RXD9: US) 1-694-302-11 TERMINAL BOARD (CHECKER PIN) (SPEAKER) (EXCEPT GRX9900/RXD9: US) < VIBRATOR > X601 1-567-098-41 VIBRATOR, CRYSTAL (32.768kHz) X613 1-781-107-21 VIBRATOR, SERAMIC (16MHz) ************************************************************ * * 1-658-578-11 MOTOR (SLIDE) BOARD ******************* < CAPACITOR > C801 C804 C805 1-162-306-11 CERAMIC 1-162-306-11 CERAMIC 1-126-964-11 ELECT < CONNECTOR > * CN801 1-568-947-11 PIN, CONNECTOR 9P < DIODE > D801 D804 D805 8-719-921-48 DIODE MTZJ-T-72-5.6C 8-719-911-19 DIODE 1SS119 8-719-911-19 DIODE 1SS119 < IC > IC801 8-759-274-09 IC BA6286N < RESISTOR > R801 1-249-401-11 CARBON < SWITCH > S801 1-762-527-11 SWITCH, ROTARY (OPEN/CLOSE DET) 47 5% 1/4W 0.01uF 0.01uF 10uF 20% 20% 20% 16V 16V 50V
20% 10% 20% 20% 20% 10% 10% 20%
1-126-157-11 ELECT 1-163-031-11 CERAMIC CHIP 1-124-589-11 ELECT

20% 20%

Ref. No. C634 C701 Part No. Description 0.01uF 0.001uF 5% 10% Remark 50V 50V (RXD9) Ref. No. D608 D609 D611 D612 D613 D614 D615 D619 D620 D622 D623 D624 D625 D626 D631 D632 D633 D634 D636 D701 C718 C719 C720 C721 C722 1-162-294-31 CERAMIC 1-126-160-11 ELECT 1-161-494-00 CERAMIC 1-162-305-11 CERAMIC 1-136-495-11 FILM 0.001uF 10% 50V (GRX9900: EA) 1uF 20% 50V (GRX9900: EA) 0.022uF 25V (GRX9900: EA) 0.0068uF 30% 16V (GRX9900: EA) 0.068uF 5% 50V (GRX9900: EA) 47uF 0.1uF 47uF 0.01uF 2.2uF 0.001uF 47PF 10uF 470PF 0.1uF 2.2uF 47PF 0.01uF 10uF 100PF 2.2uF 0.1uF 0.01uF 0.01uF 20% 16V (GRX9900: EA) 5% 50V (GRX9900: EA) 20% 16V (GRX9900: EA) 50V 20% 50V 10% 5% 20% 10% 20% 50V 50V 16V 50V 50V Part No. 8-719-074-27 8-719-074-24 8-719-071-41 8-719-071-44 8-719-071-41 8-719-071-41 8-719-063-93 8-719-056-13 8-719-073-47 8-719-057-97 8-719-057-97 8-719-063-93 8-719-063-93 8-719-057-97 8-719-058-03 8-719-058-03 8-719-058-03 8-719-058-03 8-719-063-93 Description Remark 1-130-483-00 FILM 1-163-009-11 CERAMIC CHIP LED SELUIE10CXM-LC (ILLUMINATION) LED SELUD10CXM-LC (ILLUMINATION) LED SELS5923C-TP15 (SYNC EQ) LED SELS5223C-TP15 (EFFECT) LED SELS5923C-TP15 (SYNC BASS L) LED SELS5923C-TP15 (SYNC BASS H) LED SLR325VC-N-T32 (NON-STOP) LED SML79423C-TP15 (^ CD) LED SML72923C-TP15 (REC PAUSE/START) LED SEL5923A-TP15 (+ )) LED SEL5923A-TP15 ( 0) LED SLR325VC-N-T32 (JOG DIAL) LED SLR325VC-N-T32 (ENTER/NEXT) LED SEL5923A-TP15 (GROOVE) LED SEL5423E-TP15 (9 TAPE B) LED SEL5423E-TP15 (( TAPE B) LED SEL5423E-TP15 (9 TAPE A) LED SEL5423E-TP15 (( TAPE A) LED SLR325VC-N-T32 (TIMER SELECT)

C702 C703 C704 C711 C712

1-163-009-11 CERAMIC CHIP 1-163-038-00 CERAMIC CHIP 1-163-031-11 CERAMIC CHIP 1-162-294-31 CERAMIC 1-162-305-11 CERAMIC

0.001uF

50V (RXD9) 0.1uF 25V 0.01uF 50V 0.001uF 10% 50V (GRX9900: EA) 0.0068uF 30% 16V (GRX9900: EA) 1uF 0.068uF 0.47uF 0.47uF 0.15uF 20% 50V (GRX9900: EA) 5% 50V (GRX9900: EA) 20% 50V (GRX9900: EA) 20% 50V (GRX9900: EA) 5% 50V (GRX9900: EA)

C713 C714 C715 C716 C717

1-126-160-11 ELECT 1-136-495-11 FILM 1-124-465-00 ELECT 1-124-465-00 ELECT 1-1136-167-00 FILM
8-719-976-99 DIODE DTZ5.1B (GRX9900: EA) < GROUND TERMINAL >
1-537-770-21 TERMINAL BOARD, GROUND < COIL >

FB601 FB602

1-414-234-22 INDUCTOR CHIP 0uH 1-414-234-22 INDUCTOR CHIP 0uH < FLUORESCENT INDICATOR TUBE >
C723 C724 C725 C731 C732 C733 C734 C735 C736 C737 C738 C739 C740 C741 C742 C743 C747 C782 C783
1-124-589-11 ELECT 1-136-165-00 FILM 1-124-589-11 ELECT 1-163-031-11 CERAMIC CHIP 1-124-257-00 ELECT 1-163-009-11 1-163-109-00 1-126-157-11 1-163-005-11 1-124-463-00 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT
1-517-831-31 INDICATOR TUBE, FLUORESCENT < IC >
IC601 IC602 IC603 IC604 IC711 IC712
8-759-589-13 8-749-011-05 8-759-083-77 8-759-342-19 8-759-496-40
TMP88CS76F-6004 GP1U28X BA3830F NJU3716M-T2 M65850FP (GRX9900: EA)
8-759-636-55 IC M5218AFP < JACK >
1-124-257-00 ELECT 1-163-109-00 1-163-031-11 1-126-157-11 1-163-251-11 1-124-257-00 1-163-038-00 1-163-031-11 1-163-031-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP < CONNECTOR >
20% 50V (GRX9900: EA) 5% 50V 50V 20% 16V 5% 50V 20% 50V 25V 50V 50V

J701 J711

1-785-569-11 JACK (SMALL TYPE) 1-785-569-11 JACK (SMALL TYPE) < SHORT >
JR501 JR502 JR503 JR504 JR505 JR506 JR507 JR509 JR510 JR511 JR512 JR513
1-216-296-00 1-216-296-00 1-216-295-00 1-216-295-00 1-216-295-00 1-216-295-00 1-216-295-00 1-216-296-00 1-216-296-00 1-216-296-00
SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT SHORT

* CN601

1-568-865-11 SOCKET, CONNECTOR 23P < DIODE >
8-719-058-24 DIODE RB501V-40TE-17
1-216-296-00 SHORT 1-216-296-00 SHORT
Ref. No. JR514 JR515 JR516 JR517 Part No. Description Remark Ref. No. R634 R635 R636 R637 R638 R639 R640 R641 R642 R649 R650 R651 R652 R653 R654 R655 R656 R657 R658 R659 R660 R661 R662 R663 R664 R672 R673 R674 R675 R676 R677 R678 R680 R681 R682 R683 R684 R685 R688 R689 R691 R692 R693 R694 R695 R696 R697 R698 R699 R701 Part No. 1-216-073-00 1-216-077-00 1-216-073-00 1-216-035-00 1-216-037-00 1-216-041-00 1-216-043-91 1-216-045-00 1-216-049-11 1-216-073-00 1-216-035-00 1-216-037-00 1-216-041-00 1-216-043-91 1-216-045-00 1-216-073-00 1-216-035-00 1-216-037-00 1-216-041-00 1-216-043-91 1-216-045-00 1-216-049-11 1-216-051-00 1-216-055-00 1-216-059-00 1-216-049-11 1-216-089-00 1-216-049-11 1-216-073-00 1-216-089-00 1-216-089-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-073-00 1-216-057-00 1-216-097-00 1-216-097-00 1-216-097-00 1-216-097-00 1-216-097-00 1-216-097-00 1-216-097-00 1-216-057-00 1-216-057-00 1-249-401-11 Description METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP CARBON 10K 15K 10K 680 1K 10K 680 10K 680 1K 1.2K 1.8K 2.7K 1K 47K 1K 10K 47K 47K 10K 10K 10K 10K 10K 10K 10K 10K 2.2K 100K 100K 100K 100K 100K 100K 100K 2.2K 2.2K 47 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1-216-296-00 SHORT 1-216-296-00 SHORT 1-216-295-00 SHORT 1-216-296-00 SHORT < COIL > L601 L602 1-412-029-11 INDUCTOR CHIP 10uH 1-412-032-11 INDUCTOR CHIP 100uH < TRANSISTOR > Q601 Q602 Q603 Q604 Q605 Q607 Q608 Q610 Q611 Q612 Q613 Q614 Q615 Q616 Q620 8-729-118-00 8-729-118-00 8-729-119-78 8-729-119-76 8-729-119-78 8-729-900-36 8-729-900-36 8-729-900-74 8-729-900-74 8-729-900-74 8-729-900-74 8-729-900-74 8-729-900-74 8-729-900-74 8-729-119-76 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR < RESISTOR > R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R611 R612 R613 R614 R616 R619 R620 R621 R622 R623 R624 R625 R626 R627 R628 R629 R630 R631 R632 R633 1-216-025-00 1-216-073-00 1-216-025-00 1-216-025-00 1-216-073-00 1-216-017-00 1-216-111-00 1-216-111-00 1-216-097-00 1-216-073-00 1-216-097-00 1-216-017-00 1-216-085-00 1-216-113-00 1-216-121-00 1-216-043-91 1-216-073-00 1-216-073-00 1-216-035-00 1-216-037-00 1-216-041-00 1-216-043-91 1-216-045-00 1-216-049-11 1-216-051-00 1-216-055-00 1-216-059-00 1-216-061-00 1-216-065-00 1-216-069-00 RES, CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP RES, CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP RES, CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES, CHIP METAL CHIP 100 10K 10K 47 390K 390K 100K 10K 100K 47 33K 470K 1M 560 10K 10K 680 1K 1.2K 1.8K 2.7K 3.3K 4.7K 6.8K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 2SB1116-L 2SB1116-L 2SC403SP-51 2SA1175-HFE 2SC403SP-51 DTC124ES DTC124ES DTC143TS DTC143TS DTC143TS DTC143TS DTC143TS DTC143TS DTC143TS 2SA1175-HFE

#11 7-628-254-15 SCREW +PS 2.6X6 #12 7-685-880-09 SCREW +BVTT 4X6 (S) ************************************************************ ACCESSORIES & PACKING MATERIALS ******************************* 1-475-572-11 COMMANDER, STANDARD (RM-SR5)(SILVER) 1-475-572-41 COMMANDER, STANDARD (RM-SR5B) (BLACK) 1-501-374-11 ANTENNA, LOOP (AM) (GRX9900/RXD9: AEP, UK) 1-501-659-41 ANTENNA (FM) (GRX9900/RXD9: CIS) 1-501-804-11 ANTENNA (FM) (RXD9: AEP, UK, G, AED) 3-865-601-11 MANUAL, INSTRUCTION (ENGLISH) (GRX9900/RXD9: AEP, UK, CIS) 3-865-601-21 MANUAL, INSTRUCTION (FRENCH) (GRX9900: EA) 3-865-601-31 MANUAL, INSTRUCTION (SPANISH) (GRX9900: MX, AR)
! 108 ! 108 ! 108 ! 109 ! 109
1-575-653-11 1-783-531-11 1-783-941-21 1-569-007-11 1-569-008-21
1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (RXD9: UK) 1-233-545-11 TUNER PACK (FM/AM) (GRX9900: MY, SP, MX, AR) 1-233-546-11 TUNER PACK (FM/MW/SW) (GRX9900: E3, EA) 1-693-443-11 TUNER PACK (FM/AM) (RXD9: AEP, UK, G, AED) 1-693-444-11 TUNER PACK (FM/MW/LW) (RXD9: CIS)
3-865-601-41 MANUAL, INSTRUCTION (FRENCH, SPANISH) (GRX9900: E2, E3, MY, SP/RXD9: AEP) 3-865-601-51 MANUAL, INSTRUCTION (CHINESE) (GRX9900: E3, MY, SP) 3-865-601-61 MANUAL, INSTRUCTION (ARABIC) (GRX9900: E3, EA) 3-865-601-71 MANUAL, INSTRUCTION (GERMAN) (RXD9: AEP, G) 3-865-601-81 MANUAL, INSTRUCTION (DUTCH, ITALIAN, PORTUGUESE) (RXD9: AEP) 3-865-601-91 MANUAL, INSTRUCTION (POLISH, RUSSIAN) (RXD9: AEP, CIS) 3-865-602-11 MANUAL, INSTRUCTION (DANISH, FINNISH, SWEDISH) (RXD9: AED) 3-865-603-11 MANUAL, INSTRUCTION (CZECH) (RXD9: AEP) 3-865-603-21 MANUAL, INSTRUCTION (HUNGARIAN) (RXD9: AEP) 3-865-603-31 MANUAL, INSTRUCTION (TURKISH) (RXD9: AEP) 3-865-603-41 MANUAL, INSTRUCTION (GREEK) (RXD9: AEP) 4-210-254-01 CUSHION (FOOT) (GRX9900/RXD9: AEP, UK) 4-991-151-21 COVER, BATTERY (FOR RM-SR5) (SILVER) 4-991-151-41 COVER, BATTERY (FOR RM-SR5B) (BLACK)

Sony Corporation

9-928-866-11

Home Audio Company

99D0582-1 Printed in Japan 1999. 4 Published by Quality Assurance Dept.