Memory Stick USB Reader/Writer

Operating Instructions

MSAC-US40

English

Before operating the unit, please read this manual thoroughly, and retain it for future reference.
For the Customers in the U.S.A.
If you have any questions about this product, you may call: Sony Customer Information Service Center, 1-800-222-7669 (SONY). The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name : SONY Model : MSAC-US40 Responsible Party : Sony Electronics lnc. Address : 16530 Via Esprillo, San Diego CA 92127 U.S.A. Telephone number : 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The specified USB cable (supplied) must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For the customers in Canada
This class B digital apparatus complies with Canadian ICES-003.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again.
Notice for customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61,70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Program2005, 2007 Sony Corporation Documentation2007 Sony Corporation , Memory Stick, MagicGate Memory Stick, Memory Stick Duo, , MagicGate Memory Stick Duo, Memory Stick PRO, , Memory Stick PRO Duo, , Memory , Memory Stick Micro, Stick PRO-HG Duo, , M2, , MagicGate, , OpenMG, , SonicStage and are registered trademarks or trademarks of Sony Corporation. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Adobe and Adobe Reader are registered trademarks or trademarks of Adobe Systems, Inc. in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. CD and music-related data from Gracenote, Inc., copyright 2000-2004 Gracenote. Gracenote CDDBR Client Software, copyright 2000-2004 Gracenote.This product and service may practice one or more of the following U.S.Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192,#6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Services supplied and/or device manufactured under license for following Open Globe, Inc. United States Patent 6,304,523. Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the Powered by Gracenote logo are trademarks of Gracenote. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. All other trademarks and registered trademarks are trademarks of their respective holders. and are not mentioned in each case in this manual.

Select the CD-ROM which contains the language you prefer, when installing SonicStage CP software.
This CD-ROM contains the following software and file: Device Driver Memory Stick Formatter (for Windows OS) SonicStage CP software Operating Instructions (PDF) (1) Memory Stick media is not included.
Memory Stick media (not supplied) types that can be used with this unit
Memory Stick media types Memory Stick (without MagicGate) Memory Stick (with MagicGate) MagicGate Memory Stick Memory Stick PRO Memory Stick Duo (without MagicGate) Memory Stick Duo (with MagicGate) MagicGate Memory Stick Duo Memory Stick PRO Duo Memory Stick PRO-HG Duo Memory Stick Micro (M2)* Sony does not guarantee this unit to operate with all kinds of Memory Stick media. It has been checked to operate with any Memory Stick media up to 8 GB (MSX-M8GS) (as of July, 2007). Check the following URL to see which kinds of Memory Stick media the unit supports. Memory Stick media updates/releases can be found on our Web Site: http://www.sony.net/memorystick/supporte/ This unit does not support 8-bit parallel transfer of Memory Stick PROHG Duo media. This unit supports 4-bit parallel transfer. MagicGate is a content protection technology developed by Sony. Data that requires content protection, such as music data, is only recordable and readable using Memory Stick media with MagicGate on a MagicGate compatible device. Data reading/writing speeds vary according to the combination of your Memory Stick media and device. * When using Memory Stick Micro media with this unit, insert the Memory Stick Micro media into Memory Stick Micro Adaptor (MSACMMD, MSAC-MMS/not supplied). PNote
Formatting a MagicGate compatible Memory Stick media containing data will delete all the data, including music data. Be careful not to delete important data accidentally. Sony accepts no responsibility for data loss.

System requirements

Recommended Windows OS environment
OS Windows 2000: Windows 2000 Professional Service Pack 4 or later Windows XP: Windows XP Home Edition Service Pack 2 or later/ Windows XP Professional Service Pack 2 or later/Windows XP Media Center Edition 2004 Service Pack 2 or later/Windows XP Media Center Edition 2005 Service Pack 2 or later Windows Vista: Windows Vista Home Basic/Windows Vista Home Premium/Windows Vista Business/Windows Vista Ultimate * The operating systems mentioned above must be installed on the computer when shipped from the factory. * Operation is not guaranteed for upgraded operating systems even if they are among those mentioned above. * Not compatible with Windows 98. * Not compatible with Windows 2000 Professional Service Pack 1/ Service Pack 2/Service Pack 3. CPU: Pentium III 450 MHz or faster (Pentium III 800 MHz or faster for Windows Vista) processor RAM: 128 MB or more (512 MB or more for Windows Vista) Required hard disk space: 400 MB or more (Required space varies according to your version of the Windows OS.) CD-ROM drive Sound board (A sound board is required to use SonicStage CP software.) USB port (This unit supports Hi-Speed USB (USB 2.0).) Display: High Color (16-bit) or higher, pixels or more (pixels or more recommended.)

Recommended Mac OS environment
OS: Mac OS 9.2.2/X (v10.2-10.4) * The operating systems mentioned above must be installed on the computer when shipped from the factory. * Operation is not guaranteed for upgraded operating systems even if they are among those mentioned above. RAM: 64 MB or more Hard disk: 50 MB or more available hard-disk space USB port (This unit supports Hi-Speed USB (USB 2.0).) PNote
SonicStage CP software is not compatible with the Mac OS. If you are using a Mac OS, it is not possible to transfer music data that requires copyright protection.

When using Windows OS

The following restrictions apply when SonicStage CP software is used in a Windows OS environment. Installation should take place after you log on as an Administrator. For how to log on using the Administrator account, see the manual provided with your computer. When using the software, log on as an Administrator. Service Pack 2 or later should be installed when running SonicStage CP software in a Windows XP environment.
When using this unit on a computer with Service Pack 4 of Windows 2000 installed
When starting Windows with your computer on or when rebooting Windows, always be sure to first remove the USB cable that is connecting this unit to your computer. The unit may not be recognized by your computer if Service Pack 4 of Windows 2000 is installed and you: 1. Start Windows OS with your computer on or reboot while this unit is connected to your computers USB port. 2. Unplug and plug in the USB cable that is connecting the unit to your computer after starting Windows. tThis unit will cease to be recognized by your computer. If the USB cable is not unplugged, these issues will not occur.
On System Restore of Windows XP/Windows Vista When using the Windows XP or Windows Vista, executing the System Restore item in System Tools may make it impossible to play back the songs managed by SonicStage CP software. Therefore, be sure to back up the song data managed by SonicStage CP software before you execute System Restore. After System Restore has been executed, the backed-up data can be restored and the songs managed by SonicStage CP software can then be played back. For how to back up data, see the Help information for SonicStage CP software. PNote

An error dialog appears if playback of song data is impeded following execution of System Restore. In this case, follow the instructions displayed on the screen.
Supplied software for Windows OS
The supplied Windows CD-ROM contains the following software programs.

Device driver

It is necessary to install the device driver before you use this unit. For how to install the device driver, see page 15.
Memory Stick Formatter (Windows OS)
This is a software program for formatting (initializing) of Memory Stick media. Formatting media deletes all the data recorded. In order to maintain the compatibility of Memory Stick media when using it with compatible products, always use this software when formatting Memory Stick media on this unit. PNote
Formatting Memory Stick media to which data has already been written will delete the existing data. Be careful not to delete important data by mistake.
SonicStage CP software (Windows OS)
SonicStage CP software is music management software for enjoying music. With SonicStage CP software, you can enjoy music sources such as music CDs, etc., or you can import music into the hard disk of your PC for a complete management of your collection. Furthermore, music data that has been imported into the hard disk of your PC can also be transferred to Memory Stick media so that they can be enjoyed outside the PC environment. PNotes
SonicStage CP software is not supported by the Mac OS. If you are currently using different version of SonicStage software, other than SonicStage CP software, install the device driver from the CD-ROM.
About the Operating Instructions and Help
About the Operating Instructions on the CDROM
For details on how to use this unit, see these Operating Instructions. Adobe Reader from Adobe Systems Incorporated is required to view PDF files. For details on how to use Adobe Reader, see the online Help manual for Adobe Reader.
About the Help (When Using Windows OS)

The following applications feature separate online Help manuals. SonicStage CP software Memory Stick Formatter For details on how to use each of the application software programs, see the respective Help manuals. How to use the Help manuals is described as follows.

Screen view

Left frame

Right frame

Left frame Contents or Keywords are displayed here. Right frame Displays explanations. Clicking underlined parts in the text displays related explanations.
Installing supplied software on your computer (When Using Windows OS)
Follow the instructions below to install the software before you connect this unit to your computer. PNotes
Do not install the software with the unit connected to your computer. Some OS may automatically complete a part of the installation. If you click the [Driver] button in the install launcher window, the device driver, Memory Stick Formatter and Operating Instructions (PDF) are installed on your computer.

Turn on your computer.

At this point, do not connect this unit to your computer. Close all running applications. To install the device driver, you must log on with Administrator rights.
Insert the supplied CD-ROM into the CD-ROM drive on your computer.
The Installer launcher starts up automatically. To install a driver, click the [Driver] button in the menu.
Carefully read the License Agreement, and then click the [Agree] button.
When you click the [Agree] button, installation of the driver starts.
Click the [Next] button as prompted on the screen. When you click [Finish], the driver installation is completed. Following this, installation of the Memory Stick Formatter starts.
Select the language on the [Choose Setup Language] screen, then click the [Next] button. Follow the instructions on the screen and click [Next].
When you click [Finish], installation of Memory Stick Formatter is completed.
To use Memory Stick Formatter, select [Start] [All Programs] [Memory Stick Utility] [Memory Stick Formatter].
Following this, installation of the Operating Instructions (PDF file) is performed automatically.
When installation of the Operating Instructions is completed, the application selection screen returns. To end installation of the software at this point, click [Exit]. If you do so, SonicStage CP software will not be installed. To view the Operating Instructions, select [Start] [All Programs] [Sony Memory Stick Reader Writer] [MSAC-US40 Instructions Manual].
Installing SonicStage CP software on your computer
Do as follows to install SonicStage CP software.
Click the [SonicStage] button in the menu.
Select your region in the region selection dialog box, and click the [Next] button. Click the [Install SonicStage] button. Carefully read the License Agreement, and then click the [Yes] button. Select the folder in which you want to install SonicStage CP software.

To change the folder suggested for the installation, click the [Browse] button and then select the folder. When the storage destination folder is decided, click the [Next] button.
Click the [Done] button. Restart your computer.
Be sure to connect this unit only after you have restarted your computer.
Connecting this unit to your computer
Connect the USB port on this unit to a USB port on your computer using the special USB cable supplied.
USB port USB port A connector Mini-B connector

Access lamp

On the USB cable
A connector: This is plugged into the USB port on the computer. Any ports can be used if the computer is provided with multiple USB ports. Mini-B connector: This is plugged into the USB port on this unit.
Firmly insert the Mini-B connector of the USB cable into the USB port on this unit as far as it will go. Plug the A connector of the USB cable into a USB port on your computer.
The Found New Hardware Wizard starts up and the unit is recognized by your computer. When using a computer with multiple USB ports, do not connect other devices, with the exception of a standard mouse and keyboard, to USB ports at the same time as this unit. For details, see Recommended ways for connecting this unit on page 19.
Recommended ways for connecting this unit
The operation of this unit has been confirmed when connected to the computer in either of the following ways. When this unit is connected to a USB port on the computer main unit, and nothing is connected to other USB ports on the computer main unit. When, on a computer with a USB keyboard and mouse as standard equipment, the USB keyboard is connected to one of the USB ports on the computer main unit, and this unit is connected to another USB port on the computer main unit with the supplied USB cable. PNotes
When two or more USB devices are connected to one computer, and both are used simultaneously, operation of this unit is not guaranteed depending on the USB devices. Operation is not guaranteed if this unit is connected via the cable to the keyboard or USB hub. Not all operations are guaranteed on all computers, even when running under the recommended environment. Make sure to use the specified USB cable (supplied) to connect this unit to your computer.
Confirming that connections are completed

Turn on your computer. Insert Memory Stick media to this unit and connect the USB port on this unit with a USB port on the computer main unit using the special USB cable supplied.
See page 18 for how to connect this unit and your computer.
Driver installation starts automatically and the driver is installed on the computer. When driver installation is completed, a drive icon of this unit appears on the desktop and this unit can now be used.
The drive icon of this unit is not displayed on the desktop when Memory Stick media is not inserted to this unit.
Removing this unit from your computer or removing Memory Stick media from this unit
Close the software used by this unit. Confirm that the access lamp is not blinking. Drag the drive icon of this unit to the Trash icon.
Alternatively, place the drive icon of this unit in the selected state and select Eject from the Special menu in the upper left of the screen.
Remove this unit from your computer or remove Memory Stick media from this unit.
The access lamp lights when you insert Memory Stick media into the unit. This blinking indicates that the data on the Memory Stick media is being accessed. Never remove the Memory Stick media turn off the computer or unplug the USB cable while the access lamp is blinking. Doing so may damage the data on the Memory Stick media. Unplugging the USB cable or removing the Memory Stick media in this unit, without performing the operations above, may cause damage to the Memory Stick media. Unplug the USB cable or remove the Memory Stick media after performing these operations. Sony will not be liable for any damage caused as a result of not following the instructions above.
About SonicStage CP software
SonicStage CP software is music management software for enjoying music. With SonicStage CP software, you can enjoy listening to music sources such as music CDs, etc., or you can import music into the hard disk of your PC for a complete management of your collection. Furthermore, music data that has been imported into the hard disk of your PC can also be transferred to Memory Stick media so that they can be enjoyed outside the PC environment.

Using SonicStage CP software to listen to various music sources
SonicStage CP software enables you to play back the following music sources with simple operations: Music files on a media or Memory Stick media connected to the USB port of your computer. (The Memory Stick media can be connected to the USB port via this unit.) Music CD Music files on your PC Music files provided by Internet music distribution services (EMD services)
Creating a music database by importing music from various music sources
SonicStage CP software uses the music database My Library to manage music files that are stored in your PC. Music files can be imported into My Library from various music sources using the following methods: Record tracks from a music CD into My Library. Import music files already existing on your PC into My Library. Download music files from an Internet music distribution service and import them into My Library.
Transferring imported music data to another device or Memory Stick media for listening outside the PC environment
Music files imported into the hard disk (My Library) of your PC can be transferred to Memory Stick media. Music files transferred to the Memory Stick media can be played outside the PC environment using devices such as portable audio player, etc. For various uses of SonicStage CP software, please refer to the SonicStage CP software Help. PNote There are some WAV format, MP3 format and WMT compatible music files that cannot be imported depending on sampling rate, etc. For details concerning music files that cannot be imported, please refer to Importable Files in SonicStage CP software Help.
Before using SonicStage CP software
Before using SonicStage CP software, please read the following cautionary items.
Cautions concerning launching SonicStage CP software and other OpenMG compatible software
Do not launch SonicStage CP software and other OpenMG compatible software (software capable of running/managing OpenMG format files) simultaneously. Doing so may cause music files stored on the PC hard disk or devices/media to be damaged, and rendered unusable.
Cautions concerning using SonicStage CP software and other software at the same time
Please note the following when running SonicStage CP software and other software at the same time. When recording tracks from a music CD using SonicStage CP software do not run other software capable of music CD playback. Recording of the music CD may not perform properly. When running other software while playing back music files using SonicStage CP software, the sound may pause momentarily.

Cautions when running Windows XP/Windows Vista system tool System Restore
Running System Restore, a system tool built in Windows XP and Windows Vista, may cause a malfunction in management data resulting in all recorded or imported files to become unusable. In order to prevent the loss of important music data, use the SonicStage CP software backup tool to backup music data before running System Restore on your system. After using System Restore, saved music data can be made to play back by restoring with the SonicStage CP software back up tool. For the use of the SonicStage CP software backup tool, please refer to the SonicStage CP software Help.
Restrictions imposed by the copyright protection
The SonicStage CP software employs OpenMG Sony-developed copyright protection technology to safeguard the copyright of music content. It enables you to enjoy a wide range of music via online music distribution services. The number of times you can record or play back may be restricted due to the copyright protection of music content. What you record are for personal enjoyment only. Copyright laws prohibit other forms of use without the permission of the copyright holder.
Launching SonicStage CP software
From the [Start] button of Windows, click [All Programs] [SonicStage] [SonicStage].
SonicStage CP software is launched and the main window appears. PTips When using Windows 2000 OS, launch SonicStage CP software by clicking from the [Start] button of Windows: [Programs] [SonicStage] [SonicStage]. SonicStage CP software can also be launched by: Double clicking a SonicStage icon on the desktop if displayed. Double click music files associated for playback on SonicStage CP software using Windows Explorer, etc. For various uses of SonicStage CP software, please refer to the SonicStage CP Help.
Formatting (initializing) of Memory Stick media
Formatting erases all data on the Memory Stick media and returns the media to its initial factory setting. Format the Memory Stick media using the supplied Memory Stick Formatter software. Operation on a Handycam or other Memory Stick media compatible products is not guaranteed for Memory Stick media formatted on a computer without the use of the Memory Stick Formatter software program. For the details on how to use the Memory Stick Formatter, refer to the manual supplied with the Memory Stick Formatter. You can download the Memory Stick Formatter at the following Web Site. http://www.sony.net/memorystick/supporte/ PNote
If you format Memory Stick media that contains recorded data, the already recorded data will be deleted. Be careful not to inadvertently delete important data.
Insert Memory Stick media into this unit. Start Memory Stick Formatter. After confirming that the drive is selected on which the Memory Stick media is recognized to have been mounted, click [Start format].

Formatting begins.

Never remove this unit from the computer while formatting the Memory Stick media. The data on the Memory Stick media may be damaged.
Precautions for use of Memory Stick media

How to affix labels

Recording, editing and deleting are prevented when the write-protect switch is set to the LOCK position. B Use a pointed object to move the write-protect switch on the Memory Stick Duo media. (Some of Memory Stick (Memory Stick Duo) media are not equipped with a write-protect switch.) Never remove the Memory Stick media while the access lamp is blinking (while data is being read/written). Data may be corrupted in the following cases. If the Memory Stick media is removed or the power of this main unit is turned off while the access lamp is blinking (while data is being read/written) When used in a location subject to static electricity or electrical noise Always backup important data. Sony does not accept liability for damage of the data. Data protected by MagicGate copy protection can only be used with a MagicGate compatible Memory Stick media. Do not affix any label other than those specially provided to the Memory Stick media. C When affixing labels, affix these at the designated positions. Labels should not protrude from the edges of the Memory Stick media. Do not apply excessive force when writing in the memo area of Memory Stick Duo media. When transporting or storing Memory Stick media place it in the supplied storage case. Do not touch the connector section with fingers or metallic objects. A Do not bend, drop or subject the Memory Stick media to strong impacts. Do not attempt to disassemble or modify the Memory Stick media.
Do not allow the Memory Stick media to come in contact with liquids. Do not use or store the Memory Stick media in the following environments: Where the temperature is too high (in a car with closed windows during summer, in direct sunlight, near a heater, etc.) Humid or corrosive locations
Uninstalling (Deleting) the software
After logging on as Administrator, perform the procedure described below. For how to log on as Administrator, see the manual for the computer that you are using.

Windows 2000

Click [Start] [Settings] [Control Panel]. Double-click the Add/Remove Programs icon. Select the software to be removed (SonicStage, Memory Stick Formatter) from the list of Currently installed programs, and then click [Change/Remove].
The selected software programs are uninstalled.

Windows XP

Click [Start] [Control Panel]. Click the Add or Remove Programs icon. Select the software to be removed (SonicStage, Memory Stick Formatter) from the list of Currently installed programs, and then click [Remove].

Windows Vista

Click [Start] [Control Panel]. Click the Uninstall a program icon. Select the software to be removed (SonicStage, Memory Stick Formatter) from the list of Uninstall or change a program. and then click [Uninstall].

Troubleshooting

Symptom The Memory Stick icon (Removable disk) is not displayed. Cause/Solution Media is not connected correctly. t Connect correctly. (Page 18) In addition to this unit, another device is connected to the USB port on the computer. t Disconnect other USB devices than this unit. Or turn off the power and reboot. The driver is not installed or is installed improperly. t Install (or remove and re-install, as necessary) the driver from the supplied CD-ROM. (Page 15) No Memory Stick media inserted. t Insert Memory Stick media.
The Memory Stick media cannot be accessed from Explorer or My Computer. The access lamp is not on when Memory Stick media is inserted.
Music data can no longer be used on the computer.
Foreign matter adhering to the connector section of the Memory Stick media. t Check whether dust or dirt is adhering to the connector section of the Memory Stick media. Remove any foreign matter and reinsert the Memory Stick media. The System Restore function found in Windows XP/Windows Vista have been executed. (Page 11) t When you have backup data, restore the backup data to the computer. For how to use the backup tool, see the Help manual for SonicStage CP software.

Specifications

Interface: Hi-Speed USB (USB 2.0)

General

Operating voltage Power consumption External dimensions
Mass Operating conditions
DC 5 V (supplied via USB cable) Max. 500 mA (during operation) Max. 0.5 mA (PC suspend time) Approx. 39 mm 18 mm 86 mm (1 9/16 23/1/2 in.) (Width Height Depth) Approx. 28 g (1 oz.) (not including Memory Stick media) Temperature 0 C to 40 C (32 F to 104 F) Humidity 20 % to 80 % (condensation not allowed)
Design and specifications are subject to change without notice. If you have any questions/comments related to this product, please visit our Customer Support website at http://www.sony.net/memorystick/supporte/

LIMITED WARRANTY

SONY ELECTRONICS INC. (for U.S. sales) or SONY OF CANADA LTD. (for Canadian Sales) (SONY) warrants this product against defects in material or workmanship for the time periods and as set forth below. Pursuant to this Limited Warranty, SONY will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, refurbished means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies. Term: For a period of one year from the original date of purchase of the product, SONY will, at its option, repair or replace with new or refurbished product or parts, any product or parts determined to be defective. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided AS IS unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software. Instructions: To obtain warranty service, you must deliver the product, freight prepaid, in either its original packaging or packaging affording an equal degree of protection to the SONY authorized service facility specified. It is your responsibility to backup any data, software or other materials you may have stored or preserved on your unit. It is likely that such data, software, or other materials will be lost or reformatted during service and SONY will not be responsible for any such damage or loss. A dated purchase receipt is required. For specific instructions on how to obtain warranty service for your product, product support, online knowledge database, frequently asked questions and free updates via the Internet: Visit SONYs Web Site: www.sony.com/service Or call the Sony Customer Information Service Center 1-800-222SONY
Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original Limited Warranty period or for ninety (90) days, whichever is longer. Any parts or product replaced under this Limited Warranty will become the property of SONY. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use; it does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, misuse, limitations of technology, or modification of or to any part of the SONY product. This Limited Warranty does not cover SONY products sold AS IS or WITH ALL FAULTS or consumables (such as fuses or batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the country of purchase, either the United States of America or Canada. LIMITATION ON DAMAGES: SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state or jurisdiction to jurisdiction. In the United States contact: Sony Customer Information Service Center, 12451 Gateway Blvd., Fort Myers, FL 33913; www.sony.com/service; or (800) 222-7669 (SONY). In Canada contact: Sony of Canada Ltd. 115 Gordon Baker Road, Toronto, Ontario M2H 3R6

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Sony Memory Stick Reader/Writer (MSAC-US40)
Memory Stick Reader/Writer

Price details:

Price excl. VAT: 23.09 Eco fees: 0.00 VAT 21 %: 4.85
PDF generated on: 9 June, 2011

Product details:

Product code: MSAC-US40 EAN: 0027242670853 Manufacturer: Sony

27.94

* VAT included Thanks to Memory Stick Reader/Writer US40, all users can simply plug in a high capacity Memory Stick Media, then transfer pictures, music and data direct from PC. Features: - Supports Memory Stick, MagicGate Memory Stick, Memory Stick PRO, Memory Stick PRO High Speed, Memory Stick Duo, Memory Stick PRO Duo, and Memory Stick PRO High Speed Duo. - Transfer rate : 480Mbps Max. (USB 2.0 High Speed). Main specifications:

Data transmission

Write speed: Read speed: 10.8 MB/s 10.9 MB/s USB 2.g 39 x 18 x 86 mm

Connectivity

Interface type:

Weight & dimensions

Weight: Dimensions W x D x H:
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.