: AD value of the remote commander Key (hexadecimal OO to FF)

BOvr Bful Rtry

Stat Adre BEmp
3. When each key on the set and on remote commander is pressed, its name is displayed on the LCD. (The operated position is displayed for 4 seconds after the slide switch is operated. If any other key is pressed during this display, the remote commander LCD switches to its name display) Example1: When > key on the set is pressed:

###### 0 00

:Total play/record errors(hex.) :Counter of sound skip check each item(hex.) ###### :6-digit address where sound was skipped last(hex.) R
Example2: When N > key on the remote commander is pressed:
4. When all the keys on the set and on the remote commander are considered as OK, the following displays are shown for 4 seconds. Example1: When the keys on the set are considered as OK:

SET OK

Example2: When the keys on the remote commander are considered as OK:

RMC OK

5. When all keys were checked or if the upper panel is opened, the key check mode quits and the test mode (display check mode) comes back.
MZ-G750/R700 SECTION 5 ELECTRICAL ADJUSTMENTS

5-1. Outline

In this set, automatic adjustment of CD and MO can be performed by entering the test mode (see page 12). However, before starting automatic adjustment, the memory clear, power supply adjustment, and laser power check must be performed in the manual mode. A key having no particular description in the text, indicates a set key. For the LCD display, the LCD display on the set is shown. Setting method of NV reset 1. Select the manual mode of the test mode, and set item number 021NV Reset (see page 13).

2. Press the X key.

5-2. Precautions for Adjustment
1. Adjustment must be done in the test mode only. After adjusting, release the test mode. 2. Use the following tools and measuring instruments. Test CD disc TDYS-1 (Part No. : 4-963-646-01) SONY MO disc available on the market Digital voltmeter Laser power meter LPM-8001 (Part No. : J-2501-046-A) Thermometer (using the Temperature Correction) 3. Unless specified otherwise, supply DC 3V from the DC IN 3V jack (J601). 4. Switch position HOLD switch.. OFF

Pin No. 98

Pin Name AVD2 AVS2 ADRB SE TE DCHG APC DSPVDD0 DSPVSS0 XTSL DIN1 DOUT DAPWMLP DAPWMLN DAPWMRP DADT ADDT LRCK XBCK FS256 MVCI DSPVDD1 ADFG F0CNT DIFVDD0 DIFVSS0 APCREF LDDR TRDR TFDR FFDR FRDR MCUVDD1 FGIN FS4 SPRD/SPDU/RTG0 SPFD/SPVS/PWM3 SPDV/RTG1 SPDW/RTG2 DSPVDD2 DSPVSS1 SPCU SPCV SPCW SRDR SFDR SLDV
I/O I I I I I I O O O O O I O O O I I O O O O O O O I O O O O O I I I O O O
Description Power supply terminal (for the analog) (+2.4 V) Ground terminal (for the analog) A/D converter the lower limit voltage input (fixed at L in this set) Sled error signal input terminal Not used (fixed at L) Tracking error signal input from RF amp (IC501) Connecting analog power supply of the low impedance (fixed at H in this set) Error signal input for the laser automatic power control Not used (fixed at H) Power supply terminal (for DSP block) (+1.5 V) Ground terminal (for DSP block) Input terminal for the frequency set up of the system clock L: 45.1584 MHz, H: 22.5792 MHz (fixed at L in this set) Input terminal of the record system digital audio signal Output terminal of the playback system digital audio signal Not used (open) D/A converter PWM output (L-CH right phase) Not used (open) D/A converter PWM output (L-CH reverse phase) Not used (open) D/A converter PWM output (R-CH right phase) Not used (open) Audio data output Not used (open) Data signal input from the external A/D converter (IC301) L/R sampling block signal (44.1 kHz) output to the external A/D converter (IC301) Bit clock signal (2.8224 MHz) output to the external A/D converter (IC301) 11.2896 MHz clock signal output to the external A/D converter (IC301) Vibrate input for the digital in PLL from the external VCO Power supply terminal (for DSP block) (+1.5 V) Not used (fixed at L)
ADIP duplex FM signal (20.kHz) input from RF amp (IC501) Filter cut off control signal output Not used Power supply terminal (for DSP I/F) (+2.3 V) Ground terminal (for DSP I/F) Control signal output to the reference voltage generation circuit for the laser automatic power control PWM signal output for the laser automatic power control Not used (open)
Tracking servo drive PWM signal output () to the motor driver (IC551) Tracking servo drive PWM signal output (+) to the motor driver (IC551) Focus servo drive PWM signal output (+) to the motor driver (IC551) Focus servo drive PWM signal output () to the motor driver (IC551) Power supply terminal (for the microcomputer block) (+1.5 V) FG signal input terminal for the spindle servo Not used (open) 176.4 MHz clock signal output to the power control (IC601, IC901) Spindle servo drive PWM signal output terminal () to the motor driver (IC551) Spindle servo drive PWM signal output (+) Spindle motor drive control signal output (V)/RTG output 1 to the motor driver (IC551) Spindle motor drive control signal output (W)/RTG output 2 to the motor driver (IC551) Power supply terminal (for DSP block) (+1.5 V) Ground terminal (for DSP block) Spindle motor drive comparison signal input (U) from the motor driver (IC551) Spindle motor drive comparison signal input (V) from the motor driver (IC551) Spindle motor drive comparison signal input (W) from the motor driver (IC551) Sled servo drive PWM signal output () to the motor driver (IC551) Sled servo drive PWM signal output (+) to the motor driver (IC551) Sled motor drive signal output (V) to the motor driver (IC551)/drive control signal output (1)

Pin No. 243 244

Pin Name (XAVLS), (SOUND 1, 2) XHOLD SW (SYCN REC) NC PROTECT FLASHVDD FLASHVSS SLD MON VLON SLEEP FFCLR CHG GAIN CHG (TUN REG ON) XHP STBY MIFVDD3 MIFVSS2 TEST2 NC
I/O I I I O I I O O O O O O O O
Description Not used (open) HOLD switch input terminal L: hold ON, H: hold OFF SYNCHRO REC switch input terminal L: OFF, H: ON Not used (open)
Not used (open) Detection input terminal of the record check claw from the protect detection switch (S803) L: recording possible condition, H: protect Power supply terminal (for the internal FLASH ROM) (+2.4 V) Ground terminal (for the internal FLASH ROM) Sled servo monitor signal input from the motor driver (IC551) Power supply control signal output for the laser diode drive to the power control (IC901) System sleep control signal coutput to the power control (IC901) H: sleep ON Input latch output for the start switching to the power control (IC901) Charge gain control signal output to the power control (IC601) Charge ON/OFF control signal output to the power control (IC601) Not used (open) Headphone standby signal output to the headphone amp (IC302) Power supply terminal (for the microcomputer I/F block) (+2.3 V) Ground terminal (for the microcomputer I/F block) Input terminal for the main test (normally open) Not used (open) H: charge ON
6-2. BLOCK DIAGRAM SERVO SECTION
MD MECHANISM (1/2) M603 OVER WRITE HEAD UP/DOWN
MOTOR FLEXIBLE (1/2) BOARD
MAIN BOARD (1/3) SERVO SECTION
HD DRV+ 10 HD DRV 9 CN502(1/2) OVER WRITE HEAD DRIVE Q604,605 RF AMP,FOCUS/TRACKING ERROR AMP ICVREF SYSTEM CONTROL (1/2) 25 VREF HD DRV+ HD DRV HB HA EFM PRE DRIVER EFM CLK HI-BRIDGE PRE DRIVER VRECIN4 VRECO B+ OVER WRITE HEAD DRIVE IC601(1/2)

HR601 OVER WRITE HEAD

Signal path : PLAYBACK : REC(ANALOG IN) : REC(DIGITAL IN)
OPTICAL PICK-UP BLOCK (LCX-4R) 6 Iy Ix Jx 9

OUTA 41 OUTB 38

SW RECON OE
IY IX JX JY A B C D RF OUT PEAK /BOTM PEAK BOTM ABCD FE TE TPP/WPP

198 197

MODE3 MODE2 MODE1

X MIC DET J302

OUTL OUTA BEEP F23 REFERENCE VOLTAGE SWITCHING Q301

SDO0 SCK0

16 PDN

CDTI 13 CCLK 14 CSN 15

CLOCK DIVIDER

OUT R OUTB BEEP

RVDD DTCK KEY-R RGND

MUTING

BEEP VREF IN 13

STANDBY

18 SYSTEM CONTROL /POWER SECTION

203 204

RMC DTCK 142
XOPT CTL XJAC DET OPT DET

XCS NV

25 SYSTEM CONTROL /POWER SECTION

SDISI0 SDOSO0 SCKSCK0

SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR 16M BIT D-RAM IC801(2/3)

XHP STBY

XMIC DET

XCS ADA

XPD ADA

RMC KEY

SDI0 SDO0 SCK0

X801 45.1584MHz

EEPROM IC804

DI SK XCS

6-4. BLOCK DIAGRAM SYSTEM CONTROL / POWER SECTION
MAIN BOARD (3/3) SYSTEM CONTROL/POWER SECTION
G750 Q1007 R700 R920 R1036 R700
RMC KEY FS4 CLK SEL FFCLR SLEEP VLON WK DET/PLAY(G750) REC KEY HALF LOCK SW AUDIO SECTION 19 R1028 S805 (HALF LOCK) R700
SDO0 SCK0 SYSTEM CONTROLLER IC801(3/3)
VRMC XWK3 CLK CLK SEL FFCLR SLEEP VLON XWK1 XWK2 XWK4 VAIFON VSTB VB VC VLD VL REGULATOR BANDGAP REFERENCE STEP-UP PRE DRIVER & PWM VL D902 L902
SYSTEM CONTROL POWER CONTROL IC901
VB HEADPHONE AMP(IC302), MOTOR/COIL DRIVER(IC551) B+
G750 R1029 SERVO SECTION CN8 SWITCH & LCD MODULE UNIT 16 SDO0 SCK0 RST STB CS XWK1 R1027 R700 REC R1040 PLAY R1031 STOP R1032 GDVDD VIF B+ RESET SWITCH Q801 VIF B+ VB B+ PAUSE KEY SET KEY1 SET KEY2 XHOLD SW R700 R1046 VC DC-DC CONVERTER IC1006 MIC DETECT Q1008 GLCD RST AUX 206 LCD STB 205 XCS LCD TSB MST VDD 141 D1002 R700 R1024 V+ MIC AMP (IC303) B+ CLK VREF L801 AVDD 21 D1003 VB Q1010 VG VC B+ AUDIO SECTION R1025 Q1009 R700 VL MON/STOP(G750) 15

VL LASER APC CIRCUIT B+

SWITCHING REGULATOR
VD SYSTEM CONTROLLER(IC801) B+
DTC25 DTC1 VDFB 39 VD 44 VIFFB 38 VIF 42

12 LL905

STEP-UP DC/DC CONVERTER
VIF A/D CONVERTER(IC301), RF AMP(IC501) SYSTEM CONTROLLER(IC801) EEPROM(IC804) B+ VA A/D CONVERTER(IC301), SYSTEM CONTROLLER(IC801) B+ VC REMOTE CONTROL CIRCUIT B+

SERIES PASS REGULATOR

41 D904 35
VG MOTOR/COIL DRIVER(IC551) POWER CONTROL (IC601) B+

AUDIO SECTION VL PWM 164

PAUSE SET KEY1 SET KEY2 HOLD
VC REGULATOR SWITCH VOUT SWITCHING REGULATOR RESET SIGNAL GENELATOR DTC1 STEP-UP PRE DRIVER & PWM L1 L1 VC

X MIC DET

22 NOISE FILTER NOISE FILTER G750 VC D1004

INM2 RF2 INM1 RFI XRST

D32 28

VC PWM 165

S806 OPEN/CLOSE DETECT S803 PROTECT DETECT SL801 (TEST) VIF B+

170 OPEN CLOSE SW XRST 8

47 CRST

230 PROTECT

3 XTEST
VB L1002 L1001 D1001 Q1003 Q1006 Q1005 Q1001 CONVERTER IC1003 VOLTAGE DETECT IC1002 Q1004 Q1002 VOLTAGE DETECT IC1005 VOLTAGE DETECT IC1004

AP568 AP583

IC1002

TP1004 C822

C1004 R1008 R1007

R1022 R1017

C1002 R1005

8 RB553

C557 C558 C559

IC1005

IC1004

FB804 R815 FB802 R831 4

TP333 (D-IN) TP332 (DGND) TP331 (DVCC)

5 L801 AP586 G750

15 AP587

TP1001 R700

G750 C830
J301(1/2) LINE IN (OPTICAL)

) : MZ-G750 only

S C818

8 C823

R1025 R1030
AP502 TP336 TP337 TP338 C554 TP343 TP341 C529 C553 C556 C555

C810 C811

R807 C827

AP556 1

AP550 C561 AP558

C522 AP557 AP555 CN501

OPTICAL PICK-UP BLOCK (LCX-4R)

TP512 B C E Q501

10 TPTP519

TP() TP(+) R519 R700

L301 R1024 C204

L502 L501

R521 TP902(VL) C904
S806 (OPEN/CLOSE DETECT) TP345

R834 R839

20 TP518

R920 C913 C909 C910 C912

J302(1/2) C630

TP311 TP312 TP316

(RVCC) (DTCK) (KEY-R)
R907 R1035 R908 R921 R1036 TP901(VC) R914

R700 R910

TP306 L902 TP307 R105 C316

R700 R909

TP313 TP314 (RGND)

C606 C632

R603 C605 R619 R602

R611 R610

R609 L602 TP603 C628

C604 C919

TP912 (GND)
J601 TP315 TP317 1-679-26411 (11)

G D S C603 C624 R601

Semiconductor Location (SIDE B) Ref. No. D101 D201 D301 D602 D605 D606 D608 D901 D902 D903 (D1001) (D1005) IC301 IC302 IC303 IC501 IC601 IC801 IC805 IC901 (IC1006) Q301 Q302 Q602 Q604 Q605 Q801 (Q1001) (Q1003) (Q1006) (Q1007) (Q1009) ( Location I-11 J-11 H-12 I-9 I-5 I-2 J-2 I-8 G-9 H-8 D-3 H-3 E-9 H-11 F-10 F-7 I-4 F-4 E-6 H-8 I-2 H-10 D-10 I-6 I-2 I-2 H-5 C-3 D-4 D-5 H-7 H-4

S803 (PROTECT DETECT) 2

RECHARGEABLE (NICKEL CADMIUM) NC-WMAA 1.2V 1400mAh

C631 TP602

MOTOR FLEXIBLE BOARD MAIN BOARD (SIDE B)
AP585 AP564 AP581 AP580 C340 C321

1-679-372- 11

MD MECHANISM G750

D1001 Q1003

R1014 S

C1006 C1005

L1004 G
(XJDET) J301(2/2) LINE IN (OPTICAL) C326

R317 C325 (AGND)

RB551 RB552

7 AP903 1

OUTPUT SW VC VG DC IN VB 43 BATM 44 CHARGE MONITOR X2/X4 DC IN CHGSW 45 CHARGE CONTROL DC IN RS INP2 INM2 RF49 BATTERY CHARGER & REGULATOR DC IN HI-BRIDGE PRE DRIVER VG3 CONTROL VC

OUTPUT SW

CHARGE PUMP 1 VC VREF BUFFER VC2

28 C1H 27 C1L

EFM PRE DRIVER
26 VCVREF 24 CVREF 23 GND 22 DW BT 21 DW TP 20 RF1 VC VC AMP 19 INMINP1 VG2 VC PWM VG 16 VREC SET-UP DOWN PRE DRIVER VIO SW 17 DTC

CONTROL

DCIN 50 CHGMON 51
VC DC IN DC IN BANDGAP DC IN DETECT SYSTEM
SVREF 52 GND 53 GAIN 54 CHG 55 DREG 56

LEVEL SHIFT VIO 7

SW RECON OE CLK RI FI EFM

OUTPUT SW VC 9

15 VRECO2

VRECO1

XPC18A32FCR2

VC OUT L1 NC PGND1 PGND1

42 NC 43 VD 44 VC2 45

34 OUTPUT SW

OUTPUT SW VC VG

SERIES PASS REGULATOR VA

SERIES PASS REGULATOR VD
SERIES PASS REGULATOR VIF POWER SWITCH 1

27 RFINM1

VC STEP-UP PRE DRIVER PWM

25 DTC1

XRST 46 CRST 47 RSTREF 48
OUTPUT SW VC 24 DTC2 BANDGAP REFERENCE +

23 RFINM2

VREF 49 VB VC PWM VB 50 GND 51 VC VSTB VC VB POWER SWITCH 2 CLKSEL VAIFON FFCLR SLEEP CLK 56 SYSTEM CONTROL VSTB OUTPUT SW STEP-UP PRE DRIVER VG VG VG VG

21 PWM1

20 PWM2 VB VB VC VG 19 VG 18 LG 17 PGNDLNC

START-UP

AK5354VT
16 PDN CONTROL REGISTER I/F 15 CSN 14 CCLK 13 CDTI 12 LRCK CLOCK DIVIDER LINIPGA RINAUDIO I/F CONTROLLER 11 MCLK 10 BCLK ADC HPF 9 SDTO
LINRINVCON 5 AGND 6 VA 7 VD 8 VA VD VCON

TA2131FL

BST SW
18 PW SW TCMT 19 VCC 20 IN R 21

17 MT SW

16 BST SW

15 BEEP

13 V REF 12 VREF 11 LPF1

ADD 10 NF1 BST1

IN L 22

VREF IN

9 LPF2
OUTB BEEP 23 OUTA BEEP 24

8 NFBST BST AGC

PW GND

AGC IN

MZ-G750/R700 SECTION 7 EXPLODED VIEWS
NOTE: The mechanical parts with no reference number in the exploded views are not supplied. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. -XX and -X mean standardized parts, so they may have some difference from the original one. Color Indication of Appearance Parts Example : KNOB, BALANCE (WHITE). (RED) R R Parts Color Cabinets Color Accessories and packing materials are given in the last of this parts list. Abbreviation CET : East European & CSI model EE : East European model FR : French model HK : Hong Kong model JE : Tourist model CND : Canadian model AUS : Australian model AR : Argentina model CH : Chinese model TW : Taiwan model KR : Korean model The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.

7-1. PANEL SECTION

Ref. No. 7 7
Part No. X-3380-472-1 X-3380-473-1 X-3380-474-1 X-3380-475-1 4-218-233-17 3-222-892-01 3-222-893-01 1-476-305-11 1-804-198-11 3-318-382-91

Description

Remark

Ref. No. 8

Part No.
PANEL (S-S) ASSY, UPPER (SILVER) (R700) PANEL (L-S) ASSY, UPPER (BLUE) (R700) PANEL (Y-S) ASSY, UPPER (YELLOW) (R700) PANEL (GM-S) ASSY, UPPER (GRAY) (G750) SCREW (1.7), MI SPRING (HOLD), TORSION SPRING (REC), TENSION LCD MODULE (G750) LCD MODULE (R700) SCREW (1.7X2.5), TAPPING
X-3380-464-1 PANEL (S1) ASSY, LOWER (SILVER) (R700:US,CND,E,AUS,JE,AR,HK,CH,TW,KR) X-3380-465-1 PANEL (S2) ASSY, LOWER (SILVER) (R700:AEP,UK,EE,FR) X-3380-466-1 PANEL (L1) ASSY, LOWER (BLUE) (R700:US,E,AUS,JE,AR,HK,CH,TW,KR) X-3380-467-1 PANEL (L2) ASSY, LOWER (BLUE) (R700:AEP,UK,EE,FR) X-3380-468-1 PANEL (Y1) ASSY, LOWER (YELLOW) (R700:US,E,HK,TW,KR) X-3380-469-1 PANEL (Y2) ASSY, LOWER (YELLOW) (R700:AEP,UK,EE,FR) X-3380-470-1 PANEL (GM1) ASSY, LOWER (GRAY) (G750:US,E,AUS,JE,HK,KR) X-3380-471-1 PANEL (GM2) ASSY, LOWER (GRAY) (G750:AEP,UK,CET,FR)
8 3-222-917-01 BUTTON (OPEN) (GRAY).(SILVER,YELLOW, GRAY) 3-222-917-11 BUTTON (OPEN) (BLUE).(BLUE) 8 8

7-2. CHASSIS SECTION

MT-MZR700-172
Ref. No. * 53 * 53 * 53 * 53

Ref. No. 60

Part No. 3-222-780-01 4-218-233-09 3-335-797-01 3-318-382-01 3-222-837-01
Description SPRING, TORSION SCREW (1.7), MI SCREW (M1.4X2), TOOTHED LOCK SCREW (1.7X3), TAPPING SPRING, BATTERY COIL
X-3379-555-1 CHASSIS ASSY, SET 3-222-779-01 SPRING (OPEN), TENSION A-3323-650-A MAIN BOARD, COMPLETE (R700:CND,AEP,UK,E, AUS,EE,JE,FR,AR,HK,CH,TW,KR) A-3323-652-A MAIN BOARD, COMPLETE (G750:AEP,UK,E,AUS, CET,JE,FR,HK,KR) A-3323-694-A MAIN BOARD, COMPLETE (R700:US) A-3323-703-A MAIN BOARD, COMPLETE (G750:US)
3-222-838-01 ARM X-3379-899-1 CASE ASSY, BATTERY
7-3. MD MECHANISM DECK SECTION (MT-MZR700-172)

103 106

B B A A

104 108

114 109

M601 M602

113 109
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.

Ref. No. 113

Part No. X-3379-515-1 3-224-779-01 4-963-883-42 X-3379-514-1 4-222-218-02 4-222-223-01 4-222-226-01 4-222-222-01 3-338-645-31 X-3380-408-1

Description HOLDER ASSY SPRING, THRUST DETENT SCREW (M1.4), PRECISION PAN CHASSIS ASSY GEAR (HD) SHAFT, SUB SPRING (EJECT), TENSION GEAR (RACK) WASHER (0.8-2.5) CHASSIS ASSY, GEAR

Ref. No. M601

Part No. 1-679-372-11 4-963-883-31 4-222-216-01 4-222-208-01 4-222-204-01 4-222-203-02 X-3379-508-1 3-049-336-01 3-222-544-01 8-835-706-01
Description FLEXIBLE BOARD SCREW (M1.4), PRECISION PAN GEAR (SA) GEAR (SB) BEARING (N)
SCREW, LEAD SERVICE ASSY, OP (LCX-4R) SPRING (S), RACK GEAR (HA) MOTOR, DC SSM18A/C-NP (SPINDLE) (WITH TURNTABLE)
3-222-545-01 GEAR (HB) 4-224-885-01 SCREW (M1.2X1.5) 4-222-215-01 GEAR (HC)

M602 M603

1-763-399-11 MOTOR, DC (SLED) (WITH GEAR) 1-763-400-21 MOTOR, DC (OVER WRITE HEAD UP/DOWN)

MZ-G750/R700 MAIN

NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL:Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F:nonflammable CAPACITORS uF : F COILS uH : H
SECTION 8 ELECTRICAL PARTS LIST
Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. SEMICONDUCTORS In each case, u : , for example: uA. : A. uPA. : PA. uPB. : PB. uPC. : PC. uPD. : PD. Abbreviation CET : East European & CSI model EE : East European model FR : French model HK : Hong Kong model JE : Tourist model CND : Canadian model AUS : Australian model AR : Argentina model Remark Ref. No. C307 C308 C309 C310 C311 C312 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C330 C331 C332 C334 C335 C336 C340 C501 C502 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C518 C519 Part No. 1-125-777-11 1-107-820-11 1-119-923-11 1-125-777-11 1-125-777-11 1-125-889-11 1-135-259-11 1-125-837-11 1-135-201-11 1-104-847-11 1-131-862-11 1-164-943-11 1-135-151-21 1-125-777-11 1-131-862-11 1-135-259-11 1-135-259-11 1-164-937-11 1-164-937-11 1-164-937-11 1-107-820-11 1-164-937-11 1-135-259-11 1-125-777-11 1-135-259-11 1-164-933-11 1-125-777-11 1-164-874-11 1-127-772-11 1-164-940-11 1-164-940-11 1-164-943-11 1-127-772-11 1-127-772-11 1-164-938-11 1-164-940-11 1-164-850-11 1-164-850-11 1-125-777-11 1-164-850-11 1-107-819-11 1-125-777-11 1-125-777-11 1-127-760-11 1-164-940-11 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. When indicating parts by reference number, please include the board. CH : Chinese model TW : Taiwan model KR : Korean model Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP TANTALUM CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.047uF 0.1uF 0.1uF 2.2uF 10uF 1uF 10uF 22uF 47uF 0.01uF 4.7uF 0.1uF 47uF 10uF 10uF 0.001uF 0.001uF 0.001uF 0.1uF 0.001uF 10uF 0.1uF 10uF 220PF 0.1uF 100PF 0.033uF 0.0033uF 0.0033uF 0.01uF 0.033uF 0.033uF 0.0015uF 0.0033uF 10PF 10PF 0.1uF 10PF 0.022uF 0.1uF 0.1uF 4.7uF 0.0033uF 10% 10% 10% 10% 10% 20% 10% 20% 20% 20% 10% 20% 10% 20% 20% 20% 10% 10% 10% Remark 10V 16V 10V 10V 10V 10V 6.3V 6.3V 4V 4V 4V 16V 4V 10V 4V 6.3V 6.3V 16V 16V 16V 16V 16V 6.3V 10V 6.3V 16V 10V 16V 10V 16V 16V 16V 10V 10V 16V 16V 16V 16V 10V 16V 16V 10V 10V 6.3V 16V

Ref. No. * * * *

A-3323-650-A MAIN BOARD, COMPLETE (R700:CND,AEP,UK,E, AUS,EE,JE,FR,AR,HK,CH,TW,KR) A-3323-652-A MAIN BOARD, COMPLETE (G750:AEP,UK,E,AUS, CET,JE,FR,HK,KR) A-3323-694-A MAIN BOARD, COMPLETE (R700:US) A-3323-703-A MAIN BOARD, COMPLETE (G750:US) ********************* 3-222-837-01 SPRING, BATTERY COIL 3-318-382-01 SCREW (1.7X3), TAPPING < CAPACITOR > C101 C101 C102 C104 C105 C106 C110 C111 C112 C113 C116 C117 C118 C201 C201 1-107-823-11 CERAMIC CHIP 1-125-889-11 CERAMIC CHIP 1-164-942-11 CERAMIC CHIP 1-135-868-11 TANTAL. CHIP 1-115-467-11 CERAMIC CHIP 1-164-937-11 1-125-837-11 1-164-874-11 1-125-837-11 1-131-862-11 1-164-937-11 1-125-891-11 1-164-939-11 1-107-823-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.47uF 2.2uF 10% 16V
(US) 10% 10V (EXCEPT US) 0.0068uF 10% 16V 220uF 20% 2.5V 0.22uF 10% 10V 0.001uF 1uF 100PF 1uF 47uF 0.001uF 0.47uF 0.0022uF 0.47uF 2.2uF 10% 10% 5% 10% 20% 10% 10% 10% 10% 16V 6.3V 16V 6.3V 4V 16V 10V 16V 16V (US)
10% 20% 10% 20% 10% 10% 5% 10% 10% 10% 10% 10% 10% 10% 10% 0.5PF 0.5PF 10% 0.5PF 10% 10% 10% 10% 10%
1-125-889-11 CERAMIC CHIP
10% 10V (EXCEPT US) 10% 20% 10% 10% 10% 5% 10% 20% 10% 10% 16V 2.5V 10V 16V 6.3V 16V 6.3V 4V 16V 10V 16V 4V 16V 10V 16V
C202 C204 C205 C206 C210 C211 C212 C213 C216 C217 C218 C301 C302 C305 C306
1-164-942-11 1-135-868-11 1-115-467-11 1-164-937-11 1-125-837-11 1-164-874-11 1-125-837-11 1-131-862-11 1-164-937-11 1-125-891-11 1-164-939-11 1-131-862-11 1-107-820-11 1-135-149-21 1-107-820-11
CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP
0.0068uF 220uF 0.22uF 0.001uF 1uF 100PF 1uF 47uF 0.001uF 0.47uF
0.0022uF 10% 47uF 20% 0.1uF 2.2uF 20% 0.1uF
Ref. No. C521 C522 C523 C524 C527 C529 C530 C551 C552 C553 C554 C555 C556 C557 C558 C559 C561 C601 C602 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 C613 C614 C615 C616 C618 C619 C621 C622 C623 C624 C627 C628 C629 C630 C631 C632 C633 C801 C802 C803 C804 C805 C806 C807 Part No. 1-125-777-11 1-125-777-11 1-125-837-11 1-135-259-11 1-119-923-11 1-115-169-11 1-164-939-11 1-125-837-11 1-125-837-11 1-104-912-11 1-104-912-11 1-135-211-11 1-135-211-11 1-127-772-11 1-127-772-11 1-127-772-11 1-125-777-11 1-164-943-11 1-125-777-11 1-128-964-11 1-164-943-11 1-164-937-11 1-164-874-11 1-164-874-11 1-125-777-11 1-131-862-11 1-104-851-11 1-135-259-11 1-135-259-11 1-125-777-11 1-125-777-11 1-137-760-11 1-125-777-11 1-125-777-11 1-125-777-11 1-164-943-11 1-110-569-11 1-131-862-11 1-115-169-11 1-125-777-11 1-164-943-11 1-164-874-11 1-113-690-11 1-126-246-11 1-135-259-11 1-125-777-11 1-125-777-11 1-164-943-11 1-164-943-11 1-125-777-11 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP TANTALUM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CAP-CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP TANTALUM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 1uF 10uF 0.047uF 10uF 0.0022uF 1uF 1uF 3.3uF 3.3uF 6.8uF 6.8uF 0.033uF 0.033uF 0.033uF 0.1uF 0.01uF 0.1uF 100uF 0.01uF 0.001uF 100PF 100PF 0.1uF 47uF 10uF 10uF 10uF 0.1uF 0.1uF 100PF 0.1uF 0.1uF 0.1uF 0.01uF 47uF 47uF 10uF 0.1uF 0.01uF 100PF 220uF 220uF 10uF 0.1uF 0.1uF 0.01uF 0.01uF 0.1uF 0.047uF 0.047uF 10PF 10% 10% 10% 20% 10% 20% 10% 10% 10% 20% 20% 20% 20% 10% 10% 10% 10% 10% 10% 20% 10% 10% 5% 5% 10% 20% 20% 20% 20% 10% 10% 5% 10% 10% 10% 10% 20% 20% 20% 10% 10% 5% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 0.5PF Remark 10V 10V 6.3V 6.3V 10V 6.3V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 10V 10V 10V 10V 16V 10V 6.3V 16V 16V 16V 16V 10V 4V 10V 6.3V 6.3V 10V 10V 100V 10V 10V 10V 16V 6.3V 4V 6.3V 10V 16V 16V 4V 4V 6.3V 10V 10V 16V 16V 10V 10V 10V 16V Ref. No. C808 C809 C810 C811 C812 C813 C814 C815 C816 C817 C818 C819 C820 C821 C822 C823 C825 C826 C827 C828 C830 C901 C902 C903 C904 C905 C906 C907 C908 C909 C910 C911 C912 C913 C914 C915 C917 C918 C919 C920 C921 C922 C924 C926 C1002 Part No. 1-164-850-11 1-135-259-11 1-125-837-11 1-125-837-11 1-164-943-11 1-125-891-11 1-164-935-11 1-131-862-11 1-125-777-11 1-125-889-11 1-125-777-11 1-127-772-11 1-127-772-11 1-131-862-11 1-125-777-11 1-107-820-11 1-164-874-11 1-115-467-11 1-117-919-11 1-125-777-11 1-125-777-11 1-115-169-11 1-115-169-11 1-128-964-11 1-119-749-11 1-125-777-11 1-164-943-11 1-125-889-11 1-125-777-11 1-164-937-11 1-164-937-11 1-135-259-11 1-164-937-11 1-164-941-11 1-125-777-11 1-125-777-11 1-125-777-11 1-125-889-11 1-135-259-11 1-135-259-11 1-125-777-11 1-164-937-11 1-164-937-11 1-115-169-11 1-125-777-11 Description CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM TANTALUM TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CERAMIC CHIP 10PF 10uF 1uF 1uF 0.01uF 0.47uF 470PF 47uF 0.1uF 2.2uF 0.1uF 0.033uF 0.033uF 47uF 0.1uF 0.1uF 100PF 0.22uF 10uF 0.1uF 0.1uF 10uF 10uF 100uF 33uF 0.1uF 0.01uF 2.2uF 0.1uF 0.001uF 0.001uF 10uF 0.001uF 0.0047uF 0.1uF 0.1uF 0.1uF 2.2uF 10uF 10uF 0.1uF 0.001uF 0.001uF 10uF 0.1uF 0.5PF 20% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 20% 10% Remark 16V 6.3V 6.3V 6.3V 16V 10V 16V 4V 10V 10V 10V 10V 10V 4V 10V 16V 16V 10V 6.3V 10V 10V 6.3V 6.3V 6.3V 4V 10V 16V 10V 10V 16V 16V 6.3V 16V 16V 10V 10V 10V 10V 6.3V 6.3V 10V 16V 16V 6.3V 10V (G750) 6.3V (G750) 16V (G750) 6.3V (G750) 6.3V (G750)

< FUSE > F801 1-576-439-21 FUSE (SMD) (0.25A) < FERRITE BEAD > FB301 FB301 FB302 FB303 FB304 FB801 FB802 FB803 1-216-864-11 1-500-329-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT 0 INDUCTOR, FERRITE BEAD (R700) SHORT 0 SHORT 0 SHORT 0 (G750)
1-410-389-31 INDUCTOR CHIP 47uH (G750) 1-414-521-11 INDUCTOR 10uH (G750) < TRANSISTOR >
1-414-226-11 INDUCTOR, FERRITE BEAD 1-216-864-11 SHORT 0 1-216-864-11 SHORT 0
8-729-037-52 TRANSISTOR 2SD2216J-QR(TX).SO
@ Replacement of CXD2671-204GA (IC801) used in this set requires a special tool. Therefore, it cannot be replaced.
Ref. No. Q302 Q501 Q601 Q602 Q603 Q604 Q605 Q801 Q1001 Q1002 Q1003 Q1004 Q1005 Q1006 Q1007 Q1008 Q1009 Q1010 Part No. 8-729-046-49 8-729-922-10 8-729-046-45 8-729-046-44 8-729-053-71 8-729-046-43 8-729-046-42 8-729-429-44 8-729-052-37 8-729-013-60 8-729-051-50 8-729-037-52 8-729-037-52 8-729-051-50 8-729-905-35 Description FET FDV304P TRANSISTOR 2SA1577-QR FET SI2302DS-T1 TRANSISTOR ZDT6718TA FET TS8K1TB FET HAT2051T-EL FET HAT2050T-EL TRANSISTOR XP1501 FET XP151A13A0MR (G750) TRANSISTOR RN1110-TE85L (G750) FET XP152A12C0MR (G750) TRANSISTOR 2SD2216J-QR(TX).SO (G750) TRANSISTOR 2SD2216J-QR(TX).SO (G750) FET XP152A12C0MR (G750) TRANSISTOR 2SC4081-R (G750) Remark Ref. No. R317 R318 R319 R501 R505 R507 R517 R519 R521 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R611 R613 R619 R620 R621 R624 R801 R802 R803 R804 R805 R806 R807 R808 R809 R810 R812 R813 R814 R815 R816 R817 R821 R822 R823 R824 R825 R828 R829 R830 R831 R834 R835 R836 Part No. 1-218-941-11 1-218-953-11 1-218-953-11 1-218-971-11 1-208-703-11 1-218-953-11 1-208-691-11 1-218-977-11 1-218-446-11 1-218-989-11 1-218-981-11 1-218-977-11 1-219-724-11 1-242-996-11 1-218-949-11 1-218-945-11 1-218-983-11 1-219-724-11 1-218-990-11 1-218-990-11 1-218-957-11 1-218-990-11 1-218-965-11 1-218-965-11 1-216-797-11 1-218-981-11 1-208-927-11 1-208-927-11 1-218-959-11 1-218-959-11 1-218-951-11 1-218-929-11 1-218-965-11 1-218-977-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-929-11 1-218-990-11 1-218-990-11 1-218-977-11 1-218-981-11 1-218-953-11 1-218-945-11 1-218-959-11 1-202-974-11 1-208-691-11 1-208-691-11 1-218-989-11 1-218-990-11 Description RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP SHORT SHORT RES-CHIP SHORT RES-CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT SHORT SHORT RES-CHIP SHORT SHORT RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP SHORT 100 1K 1K 33K 6.8K 1K 2.2K 100K 1 1M 220K 100K 1 0.220 330K 0 2.2K 0 10K 10K 10 220K 47K 47K 3.3K 3.3K 10K 100K 100K 220K 1K 220 3.3K 3.3M 2.2K 2.2K 1M 0 22K 330K 0 5% 5% 5% 5% 0.5% 5% 0.5% 5% 5% 5% 5% 5% 1% 1% 5% 5% 5% 1% Remark 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/4W 1/4W 1/16W 1/16W 1/16W 1/4W

R1027 R1028 R1029 R1030 R1031 R1032 R1033
1-218-990-11 1-218-990-11 1-218-990-11 1-218-979-11
SHORT SHORT SHORT RES-CHIP
0 150K 10K 47K 1M 0 47K 0 470K
1-218-990-11 SHORT 1-218-990-11 SHORT 1-208-707-11 METAL CHIP 1-208-927-11 METAL CHIP 1-218-989-11 RES-CHIP 1-218-990-11 SHORT 1-219-724-11 METAL CHIP 1-218-990-11 SHORT 1-218-973-11 RES-CHIP 1-218-990-11 SHORT 1-218-985-11 RES-CHIP

0.5% 0.5% 5%

1-208-699-11 METAL CHIP 1-208-707-11 METAL CHIP 1-218-979-11 RES-CHIP 1-218-989-11 RES-CHIP 1-208-715-11 METAL CHIP 1-218-969-11 1-208-715-11 1-208-695-11 1-208-939-11 1-218-961-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP
0.5% 0.5% 5% 5% 0.5% 5% 0.5% 0.5% 0.5% 5%
1/16W 1/16W (R700) 1/16W (R700) 1/16W (G750) 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750) 1/16W (G750)
R1034 R1035 R1036 R1039 R1040 R1042 R1046 R1047
R1005 R1006 R1007 R1008 R1009
1-218-977-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-985-11 METAL CHIP 1-208-947-11 METAL CHIP 1-208-935-11 METAL CHIP

100K 10K 470K 330K 100K

5% 5% 0.5% 0.5% 0.5%

1-218-989-11 RES-CHIP

< NETWORK RESISTOR > RB551 RB552 RB553 RB801 1-233-959-21 1-233-973-11 1-233-967-11 1-233-973-11 RES, NETWORK (CHIP TYPE) 470 RES, NETWORK (CHIP TYPE) 100K RES, NETWORK (CHIP TYPE) 10K RES, NETWORK (CHIP TYPE) 100K < SWITCH >
R1010 R1011 R1014 R1016 R1017
1-216-857-11 METAL CHIP 1-208-935-11 METAL CHIP 1-220-398-11 RES-CHIP 1-218-977-11 RES-CHIP 1-208-683-11 METAL CHIP

1M 100K 1.5M 100K 1K

5% 0.5% 5% 5% 0.5%

S803 S805 S806

1-762-805-21 SWITCH, PUSH (1 KEY) (PROTECT DETECT) 1-771-868-11 SWITCH, PUSH (1 KEY) (HALF LOCK) 1-762-805-21 SWITCH, PUSH (1 KEY) (OPEN/CLOSE DETECT) < FILTER >
1-416-405-21 FILTER, CHIP EMI (COMMON MODE) < THERMISTOR >

R1018 R1019 R1021

1-208-699-11 METAL CHIP 1-243-975-11 METAL CHIP 1-220-398-11 RES-CHIP

4.7K 4.7M 1.5M

0.5% 5% 5%

1-533-817-21 THERMISTOR < VIBRATOR >
X801 1-795-024-11 VIBRATOR, CRYSTAL (45.1584MHz) *************************************************************

Ref. No.

Description MISCELLANEOUS ***************

114 M601 M602

1-476-305-11 1-804-198-11 1-679-372-11 8-835-706-01
LCD MODULE (G750) LCD MODULE (R700) FLEXIBLE BOARD MOTOR, DC SSM18A/C-NP (SPINDLE) (WITH TURNTABLE) 1-763-399-11 MOTOR, DC (SLED) (WITH GEAR)
M603 1-763-400-21 MOTOR, DC (OVER WRITE HEAD UP/DOWN) ************************************************************* ACCESSORIES & PACKING MATERIALS ******************************** 0 1-418-028-12 1-418-784-11 1-418-785-12 1-476-275-11 1-476-277-11 1-476-278-11 1-476-279-11 1-476-303-11 1-476-304-11 1-476-304-31 ADAPTOR, AC (AC-MZR55) (R700:E,JE) ADAPTOR, AC (AC-MZR55) (CH) ADAPTOR, AC (AC-MZR55) (AR) ADAPTOR, AC (AC-MZR55) (AEP,CET,EE,FR) ADAPTOR, AC (AC-MZR55) (UK,HK) ADAPTOR, AC (AC-MZR55) (AUS) ADAPTOR, AC (AC-MZR55) (US,CND,TW) REMOTE CONTROL UNIT (RM-MZ47) (R700) REMOTE CONTROL UNIT (RM-MZ1T) (G750:US) REMOTE CONTROL UNIT (RM-MZ1T) (G750:E,AUS,JE,HK,KR)
3-223-666-71 MANUAL, INSTRUCTION (ENGLISH, TRADITIONAL CHINESE,KOREAN) (R700:E,JE,HK,TW,KR) 3-223-666-81 MANUAL, INSTRUCTION (ENGLISH, SIMPLIFIED CHINESE) (R700:CH) 3-223-666-91 MANUAL, INSTRUCTION (ENGLISH, TRADITIONAL CHINESE) (R700:E) 3-223-667-11 MANUAL, INSTRUCTION (ENGLISH) (G750:US,AEP,UK,AUS,CET) 3-223-667-21 MANUAL, INSTRUCTION (FRENCH) (G750:AEP,FR) 3-223-667-31 MANUAL, INSTRUCTION (GERMAN,DUTCH, ITALIAN) (G750:AEP) 3-223-667-41 MANUAL, INSTRUCTION (PORTUGUESE, SPANISH) (G750:AEP,E,JE) 3-223-667-51 MANUAL, INSTRUCTION (SWEDISH,FINNISH) (G750:AEP) 3-223-667-61 MANUAL, INSTRUCTION (RUSSIAN, HUNGARIAN,POLISH,CZECH,SLOVAKIAN) (G750:CET) 3-223-667-71 MANUAL, INSTRUCTION (ENGLISH, TRADITIONAL CHINESE,KOREAN) (G750:E,JE,HK,KR) 3-223-667-81 MANUAL, INSTRUCTION (ENGLISH, TRADITIONAL CHINESE) (G750:E) 3-228-300-01 CASE, BELT CLIP CARRYING (CND,AEP,UK, CET,EE,FR) 8-953-304-90 RECEIVER MDR-E805SP SET (CND,AEP,UK,E, AUS,CET,EE,FR,JE,AR,HK,CH,TW,KR) 8-953-774-90 RECEIVER, EAR MDR-G051SP/B0 SET (G750:US) 8-953-776-91 RECEIVER, EAR MDR-026SP/S SET (R700:US)

Operating Guide for Sony MZ-R70
Portable MiniDisc Player/Recorder
MiniDisc is a highly compact recordable digital audio format. The durable 2.5 discs are re-recordable almost indefinitely. The playback controls are essentially similar to those of a CD player; this document focuses on recording and editing.

1. 2. 3. 4. 5. 6. 7.

Display Window END SEARCH Button OPEN Button Volume TRACK MARK Button HOLD Switch SYNCHRO RECORD Switch 8. Power Supply Input 9. PAUSE 10. STOP 11. TRACK Search 12. MENU Button 13. ENTER Button 14. Battery Compartment 15. MIC Input 16. Line/Optical Input 17. Headphones Jack 2 18. RECORD Switch 19. Headphones Jack 1 20. PLAY Button
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39.
Play Mode Indicator Level Meter REMAIN Indicator MONO Indicator Mega Bass Indicator Battery Life Indicator Disc Rotation Indicator SYNCH Record Indicator REC Indicator Time Display Character Information Display VOL +/- Buttons DELETE Button HOLD Switch PLAY and TRACK Search Button STOP/ENTER Button PAUSE /CAPS Button T MARK Button EDIT Button
The Sony MZ-R70 can record from an optical digital, analog, or microphone source. Optical uses a Mini-TOS plug, while the line and mic inputs use standard 1/8 plugs. If you are using a microphone with an XLR output, be sure to get an XLR to 1/8 adapter plug, available from Media Loan. To record optically, you must have a digital source with an optical output, such as a CD player. In optical recording, the level and track marks are set automatically.

Start Recording

1. Connect your source (mic, CD, etc.) 2. Press the OPEN Button (3). 3. Insert a disc (label side up) and close the cover. 4. Silde the RECORD switch (18) to the right. The unit will begin recording immediately. NOTE: To ensure that you begin recording at the end of the previous recording press the END SEARCH Button (2) before you record.
To adjust record settings, hold the PAUSE Button (9) and slide the RECORD Switch (18) to the right. More on record settings below.

Hold Function

The HOLD Switch (6), located on the bottom of the unit, is used to disable the buttons on the unit. When the HOLD Switch is activated none of the controls on the unit will respond. If you activate the HOLD Switch on the remote (34), none of the controls on the remote will respond. Neither switch affects the other device.
Media Loan The Library Group The Evergreen State College
http://www.evergreen.edu/media
Recycled & Recyclable
(360)867-6253 Olympia, WA 98505

MZ-R70/8/11/2002/MT

Adjusting Settings
All settings on the MZ-R70 are accessed through a system of menus. To access the menu, press the ENTER Button (13) and scroll through using the MENU Button (12). When the setting you want appears in the display, press the ENTER Button (13). You are now in a sub-menu for that group of settings. Continue to scroll using the MENU Button (12) and select using the ENTER Button (13). Most settings can be adjusted using the remote, however, you still have to see the display. Settings Menu MENU (12) to scroll through EDIT Display Name Erase LapTime RecRemain 1Remain AllRemain No Repeat All Repeat 1 Repeat Shuffle ENTER (13) to select Enter a name for the Disc/Track Erase Disc/Track Elapsed Time In record mode, how much time is available to record In playback mode, how much time remains in current track Time remaining after current location Normal Repeat All Tracks Repeat 1 Track Play Tracks in Random Order

PlayMode

Record Settings
RecVolume Auto Automatic Record Level Adjust Mono Recording (RecPause Only) Manual Manual Record Level Adjust MiniDiscs can be recorded in either stereo or mono. Mono recording RecMode Mono Record in Mono Stereo Record in Stereo allows twice as much time on a disc, but many professional MiniDisc MegaBass Off No Mega Bass players are not compatible with Bass1 Mega Bass level 1 mono recordings (professional decks Bass2 Mega Bass level 2 play mono discs at double speed). AVLS Off/On Hearing Protection/Volume Limiter To set mono recording: Beep Off/On Signal Beep 1. Hold the PAUSE Button (9) and slide the RECORD RecPosi FrHere Begin recording at current location Switch (18) to the right to arm FrEnd Begin recording at end of disc record-standby mode. SyncRec Off/On Synchro Recording On 2. Press the ENTER Button (13) to enter the settings menu. 3. Use the MENU Button (12) to scroll through the menu until Mono REC flashes in the display, then press ENTER (13). (To switch back to stereo recording, press ENTER (13) while Stereo REC flashes in the display.) 4. Press PAUSE (9) to begin recording.

Adjusting the Record Level Manually The MZ-R70 generally adjusts the record level automatically. You can set the level manually if necessary but only when the unit is in record-standby mode. 1. Hold the PAUSE Button (9) and slide the RECORD Switch (18) to the right to arm record-standby mode. 2. Press the ENTER Button (13) to enter the settings menu. 3. Use the MENU Button (12) to scroll through the menu until RecVolume flashes in the display, then press ENTER (13). 4. Press the MENU Button (12) until Manual REC flashes in the display, then press ENTER (13). (To switch back to automatic control, press the MENU Button (12) until Auto REC flashes in the display, then press ENTER (13).) 5. While playing the source, observe the Level Meter (22) in the display. Adjust the record level using the MENU (12) or TRACK Search (11) Buttons until the level meter reaches around -12 dB indicated by the mark above the display window. If the source is too high, lower the record level until the level meter just barely reaches the mark above the display. 6. Prepare or cue your source, then press the PAUSE Button (9) to start recording.

Editing

With MiniDiscs, dividing, combining, erasing, moving, and naming tracks are all edits that can be performed within the recorder unit. After edits are complete the unit will record the new information to the disc, indicated by TOC Edit flashing in the display. The lid will lock during editing and will not open until after TOC Edit disappears from the display. Do not move or jog the unit or remove power while TOC Edit is displayed. Moving a Track Dividing Tracks 1. While playing the track you want to move, press ENTER To place a track mark while a disc is playing, recording, or (13) so that EDIT flashes in the display. Press ENTER paused, press the T MARK Button (5). The T MARK Button on (13) again so that :Name flashes in the display. The the remote (38) functions only while recording. unit will play the track repeatedly. 2. Use the MENU Button (12) to scroll through the menu until Combining Tracks : Move flashes in the display, then press ENTER (13). To erase a track mark: The display will now show something like MV 003 -- 003. 1. Pause the track with the track mark you want The first number correlates to the track to be moved. to erase. 3. Use the MENU Button (12) to select the destination track 2. Press the TRACK SEARCH Button (11) back number. Example MV 003 -- 002, where you want to slightly to go to the beginning of the track. MARK move track 3 to track 2. To cancel the move, press the appears in the display for two seconds. STOP Button (10). 3. Press the T MARK Button (5). MARK OFF appears 4. Press ENTER (13) to complete the track move. in the display and the two tracks are combined.

Operating Guide for Sony MZ-R700
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
11. 12. 13. 14. 15. 16. 17.
REC MODE Button OPEN Button T MARK Button END SEARCH Button PAUSE Button VOL +/- Button DC IN 3V Jack Headphones Jack RECORD Switch MENU Button PLAY Button TRACK SEARCH Button STOP/CHARGE Button Display Window ENTER Button Battery Compartment LINE IN (OPTICAL) Jack MIC Jack HOLD Swtich Character Information Display
18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.
Play Mode Indication Time Display Battery Indication Mega Bass Indication Level Meter Record Mode Indication SYNC-REC Indication RECORDING Indication REC REMAIN/REMAIN DISC Indication /PLAY SEARCH Button STOP/ENTER Button PAUSE Button EDIT Button VOL +/- Buttons Headphone Jack HOLD Switch T MARK Button DELETE Button
The Sony MZ-R70 can record from an optical digital, analog, or microphone source. Optical uses a Mini-TOS plug, while the line and mic inputs use standard 1/8 plugs. If you are using a microphone with an XLR output, be sure to get an XLR to 1/8 adapter plug, available from Media Loan. To record optically you must have a digital source with an optical digital output such as a CD player. In optical recording the level and track marks are set automatically.
1. Connect your source (mic, CD, etc.) 2. Press the OPEN Button (2). 3. Insert a disc (label side up), and close the cover. 4. Silde the RECORD switch (9) to the right, the unit will begin recording immediately. NOTE: To ensure that you begin recording at the end of the previous recording, press the END SEARCH Button (4) before you record.
To adjust record settings, hold the PAUSE Button (5) and slide the RECORD Switch (9) to the right. More on record settings below.
The HOLD Switch (16) is used to disable the buttons on the unit. When the HOLD Switch is activated (orange will be visible), none of the controls on the unit will respond. If you activate the HOLD Switch on the remote (34), none of the controls on the remote will respond. Neither switch affects the other device.
All settings on the MZ-R700 are accessed through a system of menus. To access the menu, press the ENTER Button (12) and scroll through using the MENU Button (10). When the setting you want appears in the display, press the ENTER Button (12). You are now in a sub-menu for that group of settings. Continue to scroll using the MENU Button (10) and select using the ENTER Button (12). Most settings can be adjusted using the remote, however, you still have to see the display.
Settings Menu MENU (12) to scroll through EDIT Display Name Erase
ENTER (13)to select Enter a name for the Disc/Track Erase Disc/Track Elapsed Time In record mode, how much time is available to record In playback mode, how much time remains in current track Time remaining after current location Normal Repeat All Tracks Repeat 1 Track Shuffle Repeat No Mega Bass Mega Bass level 1 Mega Bass level 2

LapTime RecRemain 1Remain AllRemain Normal All Repeat 1 Repeat Shuf.Rep Off Bass1 Bass2

BASS (Mega Bass)

Mono Recording MiniDiscs can be recorded in either stereo AVLS Off/On Hearing Protection Volume Limiter or mono (LP, or Long Play, is also available, Beep Off/On Signal Beep but has significantly reduced sound quality and is not recommended). Mono recording Rec-Posi FromHere Begin recording at current location allows twice as much time on a disc, but (Record Position) FromEnd Begin recording at end of disc many professional MiniDisc players are not SYNC-R Off/On Synchro Recording compatible with mono or LP recordings (professional decks may play mono discs at double speed). To set mono recording, press the REC MODE Button (1) repeatedly until the display reads MONO. Adjusting the Record Level Manually The MZ-R700 generally adjusts the record level automatically. You can set the level manually if necessary but only when the unit is in record-standby mode. 1. Hold the PAUSE Button (5) and slide the RECORD Switch (9) to the right to arm record-standby mode. 2. Press the ENTER Button (12) to enter the settings menu. 3. Use the MENU Button (10) to scroll through the menu until RecVolume flashes in the display, then press ENTER (12). 4. Press the MENU Button (10) until Manual REC flashes in the display, then press ENTER (12). (To switch back to automatic control, press the MENU Button (10) until Auto REC flashes in the display, then press ENTER (12).) 5. While playing the source, observe the Level Meter (22) in the display. Adjust the record level using the MENU Buttons (10) until the level meter reaches around -12 dB indicated by the mark above the display window. If the source is too high, lower the record level until the level meter just barely reaches the mark above the display. 6. Prepare or cue your source, then press the PAUSE Button (5) to start recording.
With MiniDiscs, dividing, combining, erasing, moving, and naming tracks are all edits that can be performed within the recorder unit. After edits are complete, the unit will record the new information to the disc, indicated by TOC Edit flashing in the display. The lid locks during editing and will not open until after TOC Edit disappears from the display. Do not move or jog the unit or remove power while TOC Edit is displayed. Dividing Tracks To place a track mark while a disc is playing, recording, or paused, press the T MARK Button (3). The T MARK Button on the remote (35) functions only while recording. Combining Tracks To erase a track mark: 1. Pause the track with the track mark you want to erase. 2. Press the TRACK SEARCH Button (10) back slightly to go to the beginning of the track. MARK appears in the display for two seconds. 3. Press the T MARK Button (3). MARK OFF appears in the display and the two tracks are combined. Moving a Track 1. While playing the track you want to move, press ENTER (12) so that EDIT flashes in the display. Press ENTER (12) again so that :Name flashes in the display. The unit will play the track repeatedly. 2. Use the MENU Button (10) to scroll through the menu until : Move flashes in the display, then press ENTER (12). The display will now show something like MV 003 -- 003. The first number correlates to the track to be moved. 3. Use the MENU Button (10) to select the destination track number. Example MV 003 -- 002, where you want to move track 3 to track 2. To cancel the move, press the STOP Button (10). 4. Press ENTER (12) to complete the track move.