On copyrights

4-156-955-11 (1)
The map and POI data may contain copyrighted material. Copyrighted data on a Memory Stick Duo should be used within the limits of the copyright law. Do not violate the previsions of the copyright law. Microsoft, Windows, Windows Vista and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Memory Stick, , Memory Stick Duo, , Memory Stick PRO Duo, , Memory Stick Micro (M2), MagicGate, , nav-u and are trademarks of Sony Corporation. MagicGate is a generic name of a copyright protection technology, developed by Sony Corporation. All other trademarks are trademarks of their respective owners. V-Trac Information in France is provided by Mediamobile company. Trafc Information in the UK is provided by ITIS Holdings Plc. NAVTEQ. All Rights Reserved. Austria Bundesamt fr Eich- und Vermessungswesen Belgium Trafc Information is provided by the Ministerie van de Vlaamse Gemeenschap and the Ministrie de lEquipement et des Transports. Croatia, Estonia, Latvia, Lithuania, Poland, Slovenia EuroGeographics France source: @ IGN2009-BD TOPO Germany Die Grundlagendaten wurden mit Genehmigung der zustndigen Behrden entnommen Great Britain Based upon Crown Copyright material. Greece Copyright Geomatics Ltd. Hungary Copyright 2003; Top-Map Ltd. Italy La Banca Dati Italiana stata prodotta usando quale riferimento anche cartograa numerica ed al tratto prodotta e fornita dalla Regione Toscana. Norway Copyright 2000; Norwegian Mapping Authority

On trademarks

Operating Instructions GB

Bedienungsanleitung

Map Update Disc

Operating Instructions

Mode demploi

Gebruiksaanwijzing

Istruzioni per luso

Portugal

Source: IgeoE Portugal Spain Informacin geogrca propiedad del CNIG Sweden Based upon electronic data National Land Survey Sweden. Switzerland Topograsche Grundlage: Bundesamt fr Landestopographie.

Manual de instrucciones

Customer Support Portal
If you have any questions or for the latest support information on navigation, visit the website below: http://www.navu.sony-europe.com/support

NVD-U13E NVD-U13R

2009 Sony Corporation Printed in Japan

Sony Corporation

Printed in Japan

Notes on use

System requirements
OS: Windows XP/Windows Vista Hard Disk space: 2 GB or more (NVD-U13E) 512 MB or more (NVD-U13R) DVD-ROM drive USB port Monitor: 1,dots Internet connection for access to the support website
Before you update/add the maps on the navigation unit
Update the navigation unit to the latest software Check the latest software on the following website: http://www.navu.sony-europe.com/support Install the PC connection software on your computer For Windows XP users: If ActiveSync is not installed in your computer, install by either of the following methods: Insert the disc supplied with the navigation unit into your computer, select your language, then click Install ActiveSync to install the software. For Windows Vista users: Download Windows Mobile Device Center 6.1 or later from the Microsoft support site, if not already installed.
Notes The screenshots in this manual may differ depending on the disc. If you replace the old maps on the navigation unit using this disc, you will not be able to recover the old maps later. Sony cannot be responsible for any loss of personal content, such as Address Book during the update process as certain aspects may not be compatible with the updated content. Please take a few moments to write down your Address Book for safekeeping, in case they are lost as a result of the update. For Memory stick details, refer to the Quick Start Guide supplied with the navigation unit excluding NV-U71T/U51. Set your computer to not enter sleep mode while transferring the map data.

Connecting the navigation unit to your computer

For NV-U71T/U51 users:

1 Switch off the main power by sliding the POWER switch of the
navigation unit to the OFF position.

POWER OFF ON

POW OFF ER ON
2 Connect the navigation unit to the power supply with the 3 Connect the navigation unit to your computer using the 4 Switch on the main power by sliding the POWER switch of the
navigation unit to the ON position.
Wait until your computer has detected the navigation unit. For NV-U93T/U92T/U83/U82/U73T/U72T/U53/U52 users:
supplied AC adapter. supplied USB cable.
1 Connect the navigation unit to your computer using the
supplied USB cable, then turn the navigation unit on.
Setting up the PC connection software on your computer

For Windows XP users:

Connecting appears on the navigation unit display, and Set Up a Partnership appears on your computer display.
1 Select No. 2 Click Next.

For Windows Vista users:

Connecting appears on the navigation unit display, and the setup screen of the Device display appears on your computer.
1 Select Connect without setting up your device.
Note The language on the displays in this step differs depending on your computer.

Starting the application

1 Insert the disc into your computer, then select your language.
Freeing up free space on the navigation unit
As map data volume increases, free space on the navigation unit is necessary. Before installing the map, delete unnecessary language data from the navigation unit.
1 Select Delete languages from the Main Menu. 2 Select an unused language, and then click.
Selecting where to place the map data
1 Select Transfer New Maps from the Main Menu. 2 Select nav-u Internal Memory.
Note The transfer destination can be set only to nav-u Internal Memory, and the existing map data will be replaced.
For NV-U93T/U92T/U83/U82/U73T/U72T/U53/U52 users:
1 Select Transfer New Maps from the Main Menu. 2 Select the transfer destination of the map data.
Note The existing map data will be replaced when you select nav-u Internal Memory.
3 If the transfer destination is set as Memory Stick on PC, select
the drive corresponding to the Memory Stick.

Tip You can add the map data to a Memory Stick without any change to the map data in the internal memory of the navigation unit.
Selecting the maps to add/remove
1 Check the map(s) that you want to add, and uncheck any 2 Click
map(s) you want to remove.
The conrmation display appears.

3 Click OK.

Addition or removal of the map starts.
Notes The display differs depending on the model, etc. Addition/removal time differs depending on the computer performance or map type. (For example, it takes approximately 8 hours to transfer the map of Europe A to the navigation unit.) Due to the nature of the updated, highly-detailed map content, the area may be different from the map data used now. If you cannot select the map, refer to Freeing up free space on the navigation unit (page 5).
Completing the map addition/removal
The addition/removal of the map is completed when the above message is displayed.
1 Click OK. 2 Click Exit to quit the application.
For NV-U71T/U51 users: Turn off the navigation unit by the POWER switch on its bottom, and disconnect the cables. Turn on the navigation unit again. For NV-U93T/U92T/U83/U82/U73T/U72T/U53/U52 users: Disconnect the cables to use the navigation unit.

Important Q & A

Does your Address Book and Home Address data remain after the update? In many cases this data will remain, however, some data may generate an error message as a result of the updated map data. In this case, you will need to delete the particular Address Book and re-register it with the revised map data installed. Prior to updating your navigation unit, please make a note of all Address Book for safekeeping. Can previous map data be restored after updating the navigation unit? Cannot be restored to the factory default map of the navigation unit. I cannot set the destination registered in Address Book. What should I do? You may have selected a destination out of the range of the selected map. Conrm whether the selected destination is within the range of the selected map data. The destination may not be set even within the range of the selected map, since the map data was updated. If the selected destination is within the range of the selected map, register the destination point again. I cannot use a saved route. What should I do? You may have selected a route out of the range of the selected map. Conrm whether the selected route is within the range of the selected map data. The route may no longer be set within the range of the selected map, since the map data was updated. If the selected route is within the range of the selected map, register the route again. What should be done if a cable gets disconnected during the update process? Cancel the process, reconnect the cable and start over.