Information in this document is subject to change without notice. Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. The word Bluetooth and the Bluetooth logo are trademarks of Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and combinations thereof , 3DNow!, are trademarks of Advanced Micro Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation.Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations thereof are trademarks of Transmeta Corporation in the USA and other countries. Graffiti, HotSync, PalmModem, and Palm OS are resistered trademarks, and the Hotsync logo and Palm are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola are trademarks of Motrora, Inc. Other Motrola products and services with (R) mark like Dragomball are the trademarks of Motrola, Inc. All other names of systems, products and services in this manual are trademarks or registered trademarks of their respective owners. In this manual, the (TM) or (R) mark are not specified.
Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the operating and the service instructions. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. CAUTION: The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100C (212F) or incinerate. Dispose of used battery promptly. Keep away from children. CAUTION: Changing the back up battery. Overcharging, short circuiting, reverse charging, multilation or incineration of the cells must bi avoided to prevent one or more of the following occurrences; release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature. If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and instructions
Labels and stamps on the cabinet, chassis, and components identify areas requiring special precautions. Be sure to observe these precautions, as well as all precautions listed in the operating manual and other associated documents.
4. Inspect after completing service
After servicing, inspect to make sure that all screws, components, and wiring have been returned to their original condition. Also check the area around the repair location to ensure that repair work has caused no damage, and confirm safety.
2. Use designated parts only
The sets components possess important safety characteristics, such as noncombustibility and the ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the 0 mark, which appears in circuit diagrams and parts lists, denotes components that have particularly important safety functions; be extra sure to use only the designated components.

5. When replacing chip components.
Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged by heat.
6. When handling flexible print boards.
The temperature of the soldering-iron tip should be about 270C. Do not apply the tip more than three times to the same pattern. Handle patterns with care; never apply force.
3. Always follow the original design when mounting parts and routing wires
The original layout includes various safety features, such as inclusion of insulating materials (tubes and tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and clamped so as to keep it away from hot or high-voltage parts. When mounting parts or routing wires, therefore, be sure to duplicate the original layout.
Caution: Remember that hard disk drives are easily damaged by vibration. Always handle with care.

Confidential 2

PCG-C1MW/C1MWP (AM)

TABLE OF CONTENTS

Section

Page (to 1-2)

CHAPTER 1. BLOCK DIAGRAM. 1-1
CHAPTER 2. FRAME HARNESS DIAGRAM. 2-1

(to 2-2)

CHAPTER 3. EXPLODED VIEWS AND PARTS LIST
3-1. 3-2. 3-3. 3-4. Main Section... 3-1 LCD Section... 3-3 Port Assy Section... 3-5 Accessories... 3-6 (to 3-7)
History of the changes is shown as the Revision History at the end of this data.

Confidential 3

CHAPTER 1. BLOCK DIAGRAM
ModeBitRom microchip 93LC56BT DDRSDRAM 256Mb; 4 128MB

CPU Transmeta Crusoe(TM)

TM5800 867MHz

(AD11)

TDM CN 30P SDRAM DIMM CN

1010 000x

PCI Debug CN AD 25

PCI Bus (3.3V)

Inverter CN 6P CN 6P BT,HDD, BATT, PWR STNDBY LED BT CN

IDE(Primary) 50P CN

i.LINK TI TSB43AB 22PDT

AD20 REQ0, GNT0

PC Card RICOH R5C475II (CSP144)

AD29 REQ2,GNT2

MPEG2 Encoder Fujitsu MB86393

AD21 REQ5,GNT5

Graphics ATI RAGEMobility M6(A22)

AD23 REQ3,GNT3

LAN Realtek RTL8100BL

AD22 REQ4,GNT4

LAN CN VGA CN
Serial/Parallel for Debug 24P CN

i.LINK CN

PC Card CN

7 CN 40P CN 40P

L/ROUT COMP OUT

AV out CN USB CN1

South Bridge ALi

M1535+ A1-D

South AD18 IDE AD27 USB1 AD31 USB2 AD26 PMU AD28 AUDIO AD17 MODEM AD19

SM Bus2

Rominfo

AC LINK

PI2C MDC CN 30P AC'97 Yamaha YMF6 VIDEO Decoder Philips SAA7115

0100 001x

3 LCD 1280 x 1

L/RIN COMP IN

AV IN CN
MDC CN 30P MODEM Ambit T60M283.00

CNX-147

X-Bus (5V)
RTC bq3285LD BIOS ROM 2MB MBM29F016A JIG CN 50P Port80 H8Crisis

RJ11 CN

Clock Gen IMI IMIC9716IBTD

CAM Module SD23

0110 000x USB2
MIC CN HP CN Bus SW MS JIG CN 4MB Flash

LPC I/ F (3.3V)

MS, NUM, CAPS, SCRL LED PWR, CAM, BT SW JOG SW

SWX-83

CAM CN Sometaro CXD401 ATF Analog Devices ADM1030

0101 110x

SUMIRE2(Built-in MG-D) TI F741580GGB-TEB

EC/KBC

Keyboard CN SPKR CN x 2 HITACHI H8S 2149

I/O Exp O2micro OZ998

1001 100x

Bus SW

CAM CN MS CN

USB CN0

SM Bus1 SM Bus0 BATT CN Battery

0001 011x

MBX-69

Confidential

1-1 1-2 (END) PCG-C1MW/C1MWP (AM)
CHAPTER 2. FRAME HARNESS DIAGRAM

LCD HOUSING ASSY MIC

IFX-166 BOARD
From board to connector (direct connection) Harness (with connectors on both ends) Harness (soldering on either end)

LITHIUM ION BATTERY PACK

INVERTER HARNESS

INVERTER UNIT

CN2602

LCD UNIT

MODEM CARD

POWER BUTTON

JOG DIAL

CAMERA SHUTTER

SWX-83 BOARD SIDE A

Side R

2 CNCN1211 HARNESS (DC JACK) MODULAR HARNESS

LCD HARNESS

NICKEL HYDROGEN BATTERY

CN5300 CN1 50

MODULAR JACK

Side L

CN1700 i.LINK DC OUT
HARNESS (MDC TO CNX) CN1 FLEXIBLE FLAT CABLE DC IN CN2100

CN1600

PC CARD

PC CARD CONNECTOR

MBX-69 BOARD SIDE A

CN1202

CN1203

MBX-69 BOARD SIDE B

FLEXIBLE PRINT PWB (FOR HDD)

CN1213

PORT REPLICATOR PCGA-PRC1
J3231 MIC IN J3230 HEADPHONE OUT

KEY BOARD UNIT

2 DC FAN (WITH HEATSINK)

7 CN1204 8

FLEXIBLE PRINT PWB 1 CNCN12 12

CNX-177 BOARD SIDE A

CN1214
FLEXIBLE FLAT CABLE CN1 CN1 CN1

HDD 30GB

EXTENSION MEMORY MODULE PCGA-MM128T

IFX-168 BOARD SIDE A

SWX-84 BOARD SIDE A

MEMORY STICK

SPEAKER Lch

SPEAKER Rch

2-1 2-2 (END) PCG-C1MW/C1MWP (AM)
The mechanical parts with no reference number in the exploded views are not supplied. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. When the same reference numbers are written down in the list, please use the one listed in the first place as the main part.

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
Ref.No. Part No. 1 4-655-327-1-544-951-4-643-073-4-641-838-A-8067-402-A 1-823-467-11 4-655-318-01 X-4623-996-2 X-4623-814-7 4-655-346-01 4-655-314-01 1-476-762-61 4-655-460-01 A-8066-887-A 1-793-100-11
Description RETAINER, SPEAKER LOUD SPEAKER SHEET (SPEAKER), ADHESIVE CUSHION (SP) MOUNTED PWB SWX-84 CABLE, FLEXIBLE FLAT 8P WINDOW, MS ESCUTCHEON (MS) SUB ASSY SUB ASSY PALMREST (B) BUTTON, POWER LENS (KEYBOARD), LED ENCODER (ROTARY) BUTTON, CAPTURE COMPLETE PWB IFX-168 CONNECTOR, USB
Ref.No. Part No. 16 1-823-465-A-8067-126-A 18 1-823-466-11 * 19 4-656-219-1-476-912-* 65 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 X-4623-997-1 1-763-741-11 4-654-350-01 A-8067-483-A 4-655-344-02 1-793-637-31 6-701-830-01 4-658-557-01 4-655-345-01 4-655-333-02 1-761-457-11 4-655-326-01 1-961-397-11 1-468-624-11 1-761-449-11 4-655-311-01 1-761-452-11 A-8059-344-A 1-961-370-11 4-643-040-11 4-643-041-11 4-658-021-01 1-961-414-11 A-8067-232-A 1-694-760-21 1-694-760-31 X-4623-882-2 X-4623-815-2 4-636-934-01 4-635-956-01 4-650-469-01 4-655-339-01 4-659-658-01 4-659-659-01 4-659-656-02 4-659-657-01 4-659-774-01 4-659-683-02 4-645-941-11 4-661-192-02 4-639-112-31 4-657-192-01 4-645-214-01 4-645-214-21 3-930-461-11 4-656-239-01 7-628-253-35 4-641-726-61 4-635-301-01 4-659-702-01 4-644-637-21
Description FFC 12P SWX-83 NON-BT ASSY (S) CABLE, FLEXIBLE FLAT 16P HEAT SINK KEYBOARD UNIT (US) ESCUTCHEON (L) SUB ASSY FAN, DC (WITH HEAT SINK) SHEET (CPU), THERMAL MBX-69 2290U ASSY (S) SHEET (PC CARD), INSULATING CONNECTOR, PC CARD (EJECTOR) IC M463S1654CT1-L7A SHEET (FAN), INSULATING SHEET (BOTTOM), INSULATING COVER, BATTERY CONNECTOR CARD, MODEM OFF, STAND HARNESS (MDC TO CNX) BATTERY, VANADIUM-LITHIUM PWB, FLEXIBLE PRINT BRACKET, HDD PWB, FLEXIBLE PRINT (FOR HDD) ASSY HDD 30GB (T, 20, F) (S) HARNESS (DC POWER) COVER (L), MAIN COVER (R), MAIN SHEET (MODULAR), INSULATING HARNESS (MODEM) COMPLETE PWB CNX-177 JACK, SMALL TYPE (HEAD PHONE) JACK, SMALL TYPE (MIC) ESCUTCHEON (R) SUB ASSY CABINET SUB ASSY, BOTTOM SPACER (SPRING) SPRING (B), COMPRESSION COIL FOOT LID, MEMORY CUSHION (HDD) GASKET (IFX) SHEET (MBX), INSULATING CUSHION (MDC) CUSHION (FAN) SHEET (MS), BLIND GASKET (RING) GASKET (SPEAKER) SCREW M2X4 SCREW, TAPPING, SPECIAL (2X3) GRIP, M2 (2X3) GRIP, M2 (2X5.5) SCREW (DIA. 1.4X3.5),PRECISION M2 SCREW (2X3) SCREW +PS 2X8 SCREW (M2), SPECIAL HEAD (2X5) SCREW M3X4 SCREW (M2 (EG)), +PS (2X4) GRIP, M2 EG (2X7)

3-1. Main Section

BA 8 B A B B10 qa qf 0 qg H 24 B7 BBC B4 D 1 BE 5 C 7 qf B1 B1 BB7 B11 G 55 B11 BF qa B1 qh 7 B3 qg 0 B11 G I qs B4 BK 58 H E 5 J F D qs B8 B9 J qh qd K B9 qd B10 37
3-1 3-2 PCG-C1MW/C1MWP (AM)

3-2. LCD Section

Ref.No. Part No. 101 X-4623-818-X-4623-812-4-646-976-4-643-078-A-8067-128-A 114 115
115 (*1) 116 C 114 B15 B(*2) 111 B14 A BB BB 117 C BB13 D A BD
Description COVER SUB ASSY, HINGE BEZEL SUB ASSY (B), LCD CUSHION (LATCH) RUBBER (UNDER), BLIND LCD 8.9WSXGA ASSY (S) INVERTER UNIT INVERTER HARNESS (6PIN) LCD HARNESS HINGE (L) PLATE (CAMERA), ORNAMENTAL COVER SUB ASSY, CAMERA HOLDER, RING RING, FOCUS SHEET (CAMERA), PROTECTION CCD BCX-SD23 ASSY (S) NUT PLATE HINGE (C) BEARING (C) CABINET, CAMERA DETECTOR PLATE (SMALL), GROUND LATCH SPRING, COMPRESSION LENS (HOUSING), LED MICROPHONE, ELECTRET CONDENSER HOUSING SUB ASSY (B) IFX-166 NON-BT ASSY (S) SHEET (CAMERA), ESD SHEET (KEL), ADHESIVE CUSHION (HOUSING) SHEET (EMI), HINGE SHEET (IFX-166), INSULATING (C1MW).LABEL (ID) (C1MWP).LABEL (ID) SHEET, LCD GRIP, M2 (2X5.5) M2 SCREW (2X3) SCREW M2 (NE) (2X6) SCREW M2 (NE) (2X4) SCREW (M2.6),CROSS (HOLE) BIND SCREW (1.7X3), TAPPING
1-476-913-11 1-961-294-11 1-961-422-12 4-655-335-01 4-655-343-01 X-4623-813-1 4-655-341-01 4-655-336-01 4-656-886-01 A-8067-127-A 4-655-347-01 4-655-334-01 4-655-445-01 4-655-323-01 4-655-330-02 4-656-052-01 4-655-340-01 4-656-237-01 4-655-316-13 1-542-472-11 X-4623-816-5 A-8067-124-A 4-660-539-01 4-661-726-02 4-659-134-01 4-659-655-01 4-659-652-03 4-663-885-01 4-663-885-11 4-667-078-01 4-645-214-21 4-656-239-01 4-653-582-21 4-653-582-31 4-645-497-21 3-318-382-31

128 137

B4 B6 B12 B13 B14 B15

104 B12

101 105
*1 Do not dismantle the CCD BCX-SD23 assy (Ref. 115). For example, removing the connector. the focus ring (Ref. 113), align markings of *2 When mounting of gear) and groove of focus ring. camera (side
If disintegrated, do not turn focus ring (Ref. 113). Focus adjustment is off.
3-3 3-4 PCG-C1MW/C1MWP (AM)

3-3. Port Assy Section

Ref.No. Part No. 201 4-655-763-4-655-758-02 * 203 4-655-760-A-8066-914-A 205 1-794-548-11 * B16 B17 B18 4-656-128-01 1-823-344-13 4-655-761-01 4-656-127-02 X-4624-077-2 4-655-762-01 4-659-565-01 4-659-666-01 7-685-105-14 4-635-966-01 4-639-112-01
Description FOOT, RUBBER CABINET (LOWER) PLATE, CONNECTOR COMPLETE PWB CNX-147 CONNECTOR, USB (A) BRACKET CABLE, I/F HOLDER, CONNECTOR ESCUTCHEON (CONNECTOR) CABINET (UPPER) SUB ASSY LABEL, CONNECTOR SHEET (PORT REPLICATOR) GASKET TAPPING +P 2X8 NON-SLIT SCREW (HEX) SCREW M2X4

213 B18

B18 208

203 B17

202 B16

201 B16 B16 201

3-5 PCG-C1MW/C1MWP (AM)

3-4. Accessories

301 312

Ref.No. Part No.

Description ACCESSORIES ***********

Power Cord

i Link Connecting Cable
1-757-562-31 1-757-673-12 4-655-329-01 1-476-942-31 A-8067-449-A 1-823-439-11 4-657-363-01 X-4625-087-1 4-665-258-01
CORD, POWER CORD, CONNECTION CAP (IN BAG), SENSOR ADAPTOR, AC BP51A/L (U) ASSY (S) PORT ASSY CORD, I LINK CONNECTION CLAMP STAND ASSY QUICK START, 2290U LOOK AT EXPLODED VIEWS OF THE PART **********************************

AV Connecting Cable

PCGA-CRWD2

Spare Cap (for Stick)

AC Adaptor

Battery Pack

CD-RW/DVD-ROM Drive (PCGA-CRWD2)

Port Replicator

*Refer to 3-3. Port Assy Section
* The CD-RW/DVD-ROM Drive itself does not have the Part No. Refer to the PCGA-CRWD2 Service manual (9-874566-01). Because only the 312 i Link Connection Card is required for connection with a computer, the Following parts are not supplied with the CD-RW/DVD-ROM drive. 1-476-940-21 1-757-562-31 1-790-763-21 4-663-161-11 4-663-751-11 3-6 ADAPTOR, AC CORD, POWER CORD, CONNECTION MANUAL, INSTRUCTION MANUAL, INSTRUCTION (FIRST)
3-7 (END) PCG-C1MW/C1MWP (AM)
PCG-C1MW/C1MWP (AM) List of PCG-C1 Series for American Area (As of June, 2002)
PCG-C1XS PCG-C1VN PCG-C1VP PCG-C1VPK PCG-C1MV PCG-C1MV/M PCG-C1MVP PCG-C1MVP/M PCG-C1MW PCG-C1MWP

Service Manual Parts No.

9-872-053-11 9-872-126-11 9-874-422-11

9-874-449-01

9-874-577-01
: Additional Model American Area : North, Central and South Americas
This manual and the constituent data may not be replicated, copied nor reprinted in whole or in part without prior written authorization of Sony Corporation.

Sony Corporation

English 2002F0500-1
2002 Sony Corporation Published by Sony EMCS VAIO-GSC [SNT]

Revision History

Suffix -01 Ver. Ver. 1 Date 2002.06.24 First Edition Contents QM No.

<Remarks>

[Confidential] PCG-C1MW/C1MWP (AM)