PCG-GRZ530

SERVICE MANUAL

Ver 1-2002K

For American Area

US Model CanadianModel

Revision History

Lineup : PCG-GRZ530

e id f

al ti n
Design and specifications are subject to change without notice.

NOTEBOOK COMPUTER

9-876-035-01
Information in this document is subject to change without notice. Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. The word Bluetooth and the Bluetooth logo are trademarks of Bluetooth SIG, Inc. AMD, the AMD logo, other AMD product names and combinations thereof are trademarks of Advanced Micro Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation. Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations thereof are trademarks of Transmeta Corporation in the USA and other countries. Graffiti, HotSync, PalmModem, and Palm OS are resistered trademarks, and the Hotsync logo and Palm are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola are trademarks of Motrora, Inc. Other Motrola products and services with (R) mark like Dragomball are the trademarks of Motrola, Inc. All other names of systems, products and services in this manual are trademarks or registered trademarks of their respective owners. In this manual, the (TM) or (R) mark are not specified.
Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the operating and the service instructions. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. CAUTION: The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100C (212F) or incinerate. Dispose of used battery promptly. Keep away from children. CAUTION: Changing the back up battery. Overcharging, short circuiting, reverse charging, multilation or incineration of the cells must be avoided to prevent one or more of the following occurrences; release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature. If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and instructions
Labels and stamps on the cabinet, chassis, and components identify areas requiring special precautions. Be sure to observe these precautions, as well as all precautions listed in the operating manual and other associated documents.
4. Inspect after completing service
After servicing, inspect to make sure that all screws, components, and wiring have been returned to their original condition. Also check the area around the repair location to ensure that repair work has caused no damage, and confirm safety.
2. Use designated parts only
The sets components possess important safety characteristics, such as noncombustibility and the ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the 0 mark, which appears in circuit diagrams and parts lists, denotes components that have particularly important safety functions; be extra sure to use only the designated components.

5. When replacing chip components.
Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged by heat.
6. When handling flexible print boards.
The temperature of the soldering-iron tip should be about 270C. Do not apply the tip more than three times to the same pattern. Handle patterns with care; never apply force.
3. Always follow the original design when mounting parts and routing wires
The original layout includes various safety features, such as inclusion of insulating materials (tubes and tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and clamped so as to keep it away from hot or high-voltage parts. When mounting parts or routing wires, therefore, be sure to duplicate the original layout.
Caution: Remember that hard disk drives are easily damaged by vibration. Always handle with care.
ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PISES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPMENTS PUBLIS PAR SONY.

Confidential 2

PCG-GRZ530 (AM)

TABLE OF CONTENTS

Section Title Page
CHAPTER 1. BLOCK DIAGRAM. 1-1

(to 1-2)

CHAPTER 2. FRAME HARNESS DIAGRAM. 2-1

(to 2-2)

CHAPTER 3. EXPLODED VIEWS AND PARTS LIST.. 3-1
3-1. Main Section... 3-2 3-2. LCD Section Made by HI .. 3-5 3-3. Connector Section (CH Type Only).. 3-7 (to 3-8)

CHAPTER 4. OTHERS... 4-1

4-1. Replacing the CPU... 4-1 1. Removing the CPU... 4-1 2. Installing the CPU.. 4-1 (to 4-1)
History of the changes is shown as the Revision History at the end of this data.

Confidential 3

CHAPTER 1. BLOCK DIAGRAM

Chipset : Intel 845MZ

200MHz Memory Bus (DDR1600) CLKGEN IM I 9870GT D
Pentium 4 Processor 512K L2 B 478pins uFCPGA

CN1801 CN3501

INVERTER

CN1301

CN1501

CN9301

CN1112

2 CN1601 30

MBX-75 Board (Side-A)

LCD HARNESS

CN2007

CN8521

MODEM CARD

IEEE 1394 i.LINK

CN3101

CN2901

CN4602

CN4601

CN4611

MEMORY STICK

PC CARD CONNECTOR

CN1202

CN9001

VIF-22 Board (Side-A)

DC FAN

CN3103

IFX-203 Board (Side-A)

CN1901

SPEAKER

CN6002 1

CN3001

143 144

CN6001

1 CN2008 20

CN2201

SWX-118 Board (Side-A)

CN2301

HARD DISK

CN8002

CN3102

CN8001

NICKEL HYDROGEN BATTERY

KEY BOARD Combination DRIVE

CN7501

FLEXIBLE PWB

CN7502

CNX-182 Board (Side-A)

HARNESS (10P)

RAM PC133 SO-DIMM 256MB

CN8402

CN7001

SWX-119 Board (Side-B)

CN8802
2nd BATTERY PACK (OPTION)

PWS-22 Board (Side-B)

TOUCH PAD

BATTERY PACK

LEX-40 Board (Side-A)

JOG DIAL

From board to connector (direct connection) Harness (connector at both end) Harness (soldered at one end) Connectors soldered on board and appearing on the panel
2-1 2-2 (END) PCG-GRX530 (AM)
CHAPTER 3. EXPLODED VIEWS AND PARTS LIST
Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. When two or more parts are shown in parallel, use the part described first as the main part. The parts marked $ are the High Value Modules. The parts marked # are the parts on which barcode label is attached. The indication [CH] is used for identification of part type. Regarding the boards of this model, the discrete parts on the boards cannot be replaced. However, Some connectors can be replaced.
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.

3-1 PCG-GRZ530 (AM)

3-1. Main Section
Ref.No. *7 ** * 64 Part No. 4-667-050-01 1-796-166-21 X-4625-237-1 4-667-053-01 4-667-062-01 9-885-028-59 4-653-795-01 4-667-061-01 4-667-037-01 A-8067-680-A $ 8-458-828-72 $ # A-8067-678-A $ 4-667-033-01 A-8067-766-A $ # 4-668-304-01 1-815-594-41 4-655-960-11 4-667-068-01 1-761-606-11 4-667-067-01 6-600-116-01 6-600-167-01 X-4625-305-1 X-4625-501-1 6-703-633-01 4-654-119-01 A-8067-682-A $ X-4625-238-1 A-8112-576-A $ 4-671-611-01 4-670-396-01 4-653-761-01 4-667-060-01 1-824-997-11 A-8067-767-A $ X-4625-234-1 4-667-066-01 X-4625-239-1 9-885-028-60 A-8067-679-A $ 4-668-294-01 4-667-052-01 4-668-299-01 X-4625-307-1 X-4625-235-1 X-4625-232-1 4-654-606-01 A-8067-442-A $ 1-529-878-31 4-667-038-01 1-823-099-11 A-8067-684-A $ 1-827-082-11 4-668-301-01 4-668-302-01 1-477-580-21 # 4-667-074-01 A-8112-366-A $ # 4-653-801-11 4-653-799-11 Description ESCUSHION TP PAD, TOUCH HOUSING (PALM REST) ASSY ESCUSHION JOG PLATE GND GT T/P FPC [CH].BUTTON HOLDER BRACKET JOG SPEAKER HOLDER L GT1 SWX-119 BD ASSY(S) RW DRIVE CRX810E-VN GT1 CNX-182 BD ASSY(S) CASE BAY GT+ MBX-75 BD ASSY(S) SHEET DRIVE CONNECTOR PC CARD (EJECT RIGHT) [CH].SHEET PC CARD BRACKET PALMREST R CARD, MODEM BRACKET PALMREST L IC M470L3224DT0-CB0 (DDR200 SO-DIMM 256MB) IC MT8VDDT3264HDG-265B3 (DDR200 SO-DIMM 256MB) BRACKET KEYBOARD ASSY BLACKET IO ASSY IC RK80532PC056512SL6GS (P4 2.4GHz) [CH].PLATE DC GT1 VIF-22 BD ASSY(S) ASSY SHIELDING PALMREST STH HEAT SINK ASSY (2) GT+ SHEET HEATSINK1 SHEET COPPER(PLATE HEATSINK) [CH].CAP ETHERNET BRACKET ILINK FFC (20P) GT+ PWS-22 BD ASSY(S) ASSY (DOOR MDC) BRACKET (PHONE) ASSY LATCH DETECTOR HARNESS, 2PIN GT1 LEX-40 BD ASSY(S) FOOT DOOR DOOR DOOR ASSY FRONT BATTERY BATTERY SPRING IO ASSY DOOR DIMM Ref.No. 110 B1 B2 B3 B4 B6 B7 B8 B10 B11 B12 B13 B14 B15 B17 Part No. X-4625-233-1 X-4625-236-1 4-654-379-12 4-668-288-01 1-756-038-11 4-642-711-11 4-671-241-01 4-668-310-01 4-666-521-01 4-668-305-01 4-668-313-01 4-654-837-01 4-654-380-31 X-4625-306-1 4-668-300-01 X-4625-163-1 4-668-306-01 4-668-307-01 4-668-308-01 4-668-312-01 4-668-297-01 4-668-295-01 4-668-296-01 4-669-868-01 4-671-612-01 4-671-609-01 4-671-610-01 4-671-208-01 4-671-203-01 4-671-204-01 4-671-205-01 4-671-206-01 4-671-207-01 4-671-608-01 4-654-387-01 4-641-726-41 4-669-867-01 4-639-112-01 4-635-301-01 4-635-966-01 4-656-703-01 4-654-386-01 4-654-385-01 4-661-107-01 4-644-899-01 4-654-811-01 7-622-205-05 4-641-726-81 Description ASSY DOOR HDD HOUSING BOTTOM ASSY COVER (PORT) CUSHION PALM BATTERY NICKEL HYDROGEN [CH].SHEET (BATTERY), ADHESIVE CAPTON TAPE (W19X20) (1) SHEET THERMAL (STH) GASKET (LAN) LENS COVER (B) SHEET HDD ICON SHEET SHEET BAY BOARD [CH].CAP BAY PLATE HEATSINK ASSY SHEET BEZEL SHEET SHEET SHEET ATI CMB (C) ASSY PORT DIMM MINI PCI

SHEET DIMM SIDE INSULATOR MB SHIELDING FAN INLET SPONGE1 FAN INLET SPONGE2 FAN INLET SPONGE 3 GT+ SHEET HEATSINK2 GT+ MOS PAD R GT+ MOS PAD L SHEET SPEAKER R SHEET SHIELDING PALMREST SHEET KB1 SHEET KB2 SHEET HOUSING BOTTOM BOARD DOCKING GT+ GASKET HEATSINK SCREW (MBX) SCREW (M2), SPECIAL HEAD SCREW(M2X4), SPECIAL HEAD SCREW M2X4 SCREW M3X4 SCREW (HEX) SCREW M2 SPACER (PWS) SPACER (VIF) STAND OFF M2X5 SCREW (M2), 0 NUMBER P3 KIND SCREW M3 NUT (M2 TYPE2), HEXAGON SCREW (M2), SPECIAL HEAD
ASSY HOOD KEYBOARD SHEET (MS) COMPLETE PWB IFX-203(2240) SPEAKER (2.8CM) SPEAKER HOLDER R CABLE, FLEXIBLE FLAT GT1 SWX-118 BD ASSY(S) FFC 12PIN (120) SHEET PWS1 SHEET PWS2 KEY BOARD UNIT (US) BASE DISPLAY HDD (MK3018GAS-30GB) (S) [CH].SHEET HDD [CH].BRACKET HDD
1 Use the CAPTON TAPE. 2 When removing STH HEAT SINK ASSY, a JIG is required. For more information, refer to Dessembly & Assembly Guide.

3-2 PCG-GRZ530 (AM)

1 B2 Y E W 21 F X 72 D BB2 B 70 G Supplied with 4 B3 A BJ 5 BB BB(Refer to page 3-6.) 79 B13 B8 BB45 BBR B2 N H 62 B96 B14 B6 B3 U BZ 94 B4 B4 B2 B2 B2 B3 Q K 34 L J BI X F 33 W 32 T 101 BB3 B15 BO 29 (*2) 52 B9 B(*1) D 50 B17 H Z N L O S BB3 G B2 U T B23 B2 P BBB17 B17 B10 Q BB11 B11 BV 98 P B7 BB7 I E Y V 61 B2 BB2 S M A B18 K B12 R B2 M B84 B2

3-3 3-4 PCG-GRZ530 (AM)

3-2. LCD Section Made by HI

Ref.No. 206

B18 223
Part No. 4-666-090-01 X-4625-183-3 4-667-073-01 4-666-091-01 4-666-340-01 4-639-623-11 4-666-253-01 4-666-430-03 A-8067-507-A $ # 4-666-429-03 1-961-757-13 4-666-339-02 X-4625-151-1 1-476-316-31 X-4625-152-1 X-4625-182-2 4-666-088-01 4-666-955-01 4-669-751-01 4-670-672-01 4-641-726-81 4-641-726-61 4-664-453-21
Description COVER SCREW LOWER HOUSING (BZEL15) ASSY COVER HINGE COVER SCREW UPPER LATCH HONTAI SPRING (LATCH), COIL SHIELD DISPLAY BRACKET LCD 15 (L) ASSY LCD 15HI AP2(S) BRACKET LCD 15 (R) LCD HARNESS LATCH BUTTON HINGE LEFT INVERTER UNIT HINGE RIGHT HOUSING (DISPLAY15) ASSY FILAMENT TAPE (W19X20) (1) CUSHION LATCH CUSHION BEZEL FILAMENT TAPE (W19X50) (1) LABEL (ID) (U) SPACER BEZEL SCREW (M2), SPECIAL HEAD SCREW (M2), SPECIAL HEAD SCREW(M2X4), SPECIAL HEAD

Ref.No. Part No.

Description ACCESSORIES ************ ADAPTOR, AC BP2NX SNT(U)ASSY(S) CORD, POWER WEIGHT SAVER (Refer to page 3-3.) QUICK (START) SPECIFICATIONS SHEET

201 B19

* * 214 * * B17 B18 B19

0803 804

1-477-206-32 $ A-8112-427-A $ # 1-757-562-21 4-653-768-02 4-669-754-01 4-669-779-01

AC Adaptor (1)

Power Cord (1)
226 B17 C B211 G H B18 225

Battery Pack (1)

Weight Saver (1)

1 Use the FILAMENT TAPE.

A 224(1) C B 208 G F E D 212 B17
NOTE : Set the DIP switch on the MBX-75 board (Main board) to match with the LCD that is used in this computer.
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
The upper position where ON indication is shown is the ON position. The lower position is the OFF position.

ON/OFF 1 1

0 : ON

1: OFF

D F E A 218 217

221(1)

3-5 3-6 PCG-GRZ530 (AM)
3-3. Connector Section (CH Type only)

Ref.No. 901

Part No.

Description

1-817-023-11 [CH].CONNECTOR, USB

USB connector

1-779-745-21 [CH].JACK, DC

DC IN connector

X-4625-501-1 [CH].BRACKET IO ASSY

I/O Bracket

Among the parts that are used on the boards of this model, only the connectors that are show in the list can be replaced. (The parts other that the specified connectors cannot be replaced.)
3-7 3-8 (END) PCG-GRZ530 (AM)
CHAPTER 4. OTHERS 4-1. Replacing the CPU

1. Removing the CPU

1 Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion comes to the lock release position. 2 Pull the CPU gently upward to lift it out of the CPU socket.

1 CPU Lock position 2

Lock release position

CPU socket

2. Installing the CPU
1 Align the triangle reference mark of the CPU with that of the CPU socket and insert all the pins of the CPU to the corresponding holes of the CPU socket. 2 Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion comes to the lock position.
2 CPU Lock release position Reference marks

Lock position

NOTE: Rotate a flat-blade screwdriver to the lock position securely. If not, the operation of the CPU may become unstable.
4-1 (END) PCG-GRZ530 (AM)
List of PCG-GRZ Series (As of November, 2002)

Model Name

Service Manual Part No.

This manual and the constituent data may not be replicated, copied nor reprinted in whole or in part without prior written authorization of Sony Corporation.

Sony Corporation

English 2002K1600-Sony Corporation Published by Sony EMCS VAIO-GSC [SNT]

Suffix

Ver. 1

2002.11.14 First Edition

Contents

QM No.

< Remarks >
[Confidential] PCG-GRZ530 (AM)

External DVD RW Drive

Includes Click to DVD software, i.LINK connector cable and upright stand. DVRW1 - Max speeds: CD read 24X, CD write 16X, CD rewrite 10X, DVD read 8X, DVD write 1X, DVD rewrite 1X. DDRW1 - Max speeds: CD read 24x, CD write 16x, CD rewrite 8x, DVD read 5x, DVD-R/RW write 1x, DVD+R/RW 2x.

Carrying Cases

Model: CCB CCR5 CCP1 CCP2 CCGX CCQ1 Exterior size: 14 x 10.8 x 3.x 12 x 5 12.5 x 15.75 x 8.x 20 x 9.x 13.5 x x 15 x 10 Computer size: 11.8 x 9.3 x 1.x 10.6 x 2.x 11.5 x x 11.5 x x 11.5 x x 11.5 x 2

Memory Modules

With more memory, run multiple applications quickly so your computer can work as fast as you do.
Sony VAIO Notebook Accessories

USB Devices

Just plug the accessory into USB port, and it is ready to use.

Fall Launch 2003

External DVD-RW Drive
PCGA-DDRW1 PCGA-DVRW1 $599.99*

Neoprene Case

PCGA-CCN1S $22.99*

PCGA-CCN2 $19.99*

PCGA-CCN3 $22.99*

Carrying Case

PCGA-CCB $49.99*

PCGA-CCR5 $69.99*

Notebook Backpack

PCGA-CCP1 $69.99*

Sport Backpack

PCGA-CCP2 $79.99*

PCGA-CCGX $129.99*

Roller Case

PCGA-CCQ1 $179.99*

512MB Memory

PCGAMM512U $499.99*

256MB Memory

PCGAMM256T $399.99*

USB Floppy Drive

PCGA-UFD5 $79.99*

USB Keyboard

PCGA-UKB1 $39.99*

USB Mobile Optical Mouse

PCGA-UMS3/V , PCGA-UMS3/S $39.99*

USB Optical Mouse

PCGA-UMS5 $39.99*

Wireless Optical Mouse

PCGA-WMS5 $59.99*

USB Bluetooth adapter

PCGA-BA1/A $99.99*

AC Adapter

PCGA-XXX $99.99* AC19V3 AC19V3 AC19V4 AC19V4 AC19V3 AC19V4 AC19V4 AC16V

Series Model #

GR GRZ GRS GRV GRX
PCG-GRX770/690/670/650 PCG-GRX600, GRX500 series BTO PCG-GRV680/670 PCG-GRV550 PCG-GRS150, PCG-GRS100/ PCG-GRS700 series PCG-GRZ610/630/660 PCG-GRZ530 PCG-GR300, GR200, GR100 series, BTO PCG-GRT260G, 270G, 240G, 200 CTO/BTO PCG-GRT190, 170, 150, 100 CTO/BTO PCG-GRT160 PCG-GRT100 series PCG-FX300, FX200, FX100 series PCG-FX210, 215 PCG-FXA63, FXA50, FXA40, FXA30 series PCG-FR130 PCG-FRV30, FRV20 series PCG-NVR23, NV100 series, BTO PCG-Z1A, Z1RA, Z1VA series PCG-R505G, R505E, R505D series PCG-R505J, T series PCG-V505D, V505B, V505A series PCG-VX89,88/P PCG-TR2A , TR1A series PCG-SRX99/P, SRX87/P PCG-C1MWP, C1MV/C/P
Integrated Integrated Integrated Integrated on on on on GRX690 and GRX670 selected models GRV680 GRZ8

3 4 6

8

AC19V7 AC19V7 AC19V7 AC19V7 AC19V1 AC19V1 AC19V1 AC19V3 AC19V7 AC19V3 AC16V6 AC19V3 AC19V1 AC16V6 AC16V3 AC16V6 AC16V3 AC16V4
C1 SR TR VX V505 R505 Z1 NV FRV FR FXA
GRT150 Only Exclude DVD RW integrated models 14, 15 only 15 only
only 10 Included on GRXIntegrated on some V505B, V505D models
* Prices are suggested retail prices Compatible with XP models only

AC Adapters

An extra AC adapter gives you more freedom. Keep one at home and one at the office so you always have one on hand.
Port Replicator/Docking Station
The PRGX1 offers PS/2, 10/100Base-TX, 2 USB, parallel, serial, VGA, DC in, S-video out, AV composite output, and audio in/out connections. DSM5 and DSM51 are mobile docking station with integrated CDRW/DVD combo drive. The PRV1 and PRZ1 offer 100Base-T Ethernet, 3 USBs, parallel, VGA and DVI-D ports. The PRGR2 includes DC-in, 2 USB, PS/2, Serial, L 10/100BASE-TX, VGA, s-Video, AV-out (TV & Line-out), and Line-in. The PRGT1 includes DC in, 2 USB, RJ-45 Ethernet, VGA output, PS/2 keyboard and mouse, serial, parallel, S-video out, Line-in, Line-out, Video out.

802.11g WIRELESS LAN

Provides up to 54 Mbps data transfer rate. Connectivity between Access Point and PC Card is 320 feet and up to 16 PCs. Microsoft Windows 98SE, Millennium Edition, 2000 Professional and XP compatible. Backward compatible with 802.11b products.

802.11a WIRELESS LAN

Provides up to 54 Mbps data transfer rate. Connectivity between Access Point and PC Card is 150 feet and up to 16 PCs. Microsoft Windows, Millennium Edition, 2000 Professional and XP compatible. Enjoy high quality video streaming with VAIO Media software!

Batteries

Get high capacity lithium-ion to provide you with more power while on the go. Insert a second battery (model numbers per chart) in the multibay of selected series to provide you with double the battery life.

802.11b WIRELESS LAN

Provides up to 11 Mbps data transfer rate. Connectivity between Access Point and PC Card is 150 feet and up to 16 PCs. Microsoft Windows 98SE, Millennium Edition, 2000 Professional and XP compatible. Compatible with 802.11g products.

802.11b

802.11a / b

802.11g

802.11a
USB Visual Communication Camera Series Model #

PCGA-UVC11 $89.99*

External Speakers

PCGA-SP1 $79.99*

Std. Capacity Battery

PCGABP51A/L $149.99*

Double Capacity Battery

PCGABP52A/L $299.99*

Quad Capacity Battery

PCGA-BP54/L $399.99*

Std. Battery

Large Capacity Battery

PCGA-BP3T $349.99*

PCGA-XXXX $499.99*

SlimDock Docking Station
PCGA-DSM5, PCGA-DSM51 $599.99*

Port Replicator

PCGA-XXXX $199.99* PRGX1 PRGX1 PRGX1

Wireless LAN PC Card

PCWA-C150S $89.99*
Wireless LAN Dual PC Card

PCWA-C700 $149.99*

Wireless LAN Router Access Point

PCWA-AR300 $199.99*

Wireless LAN Ethernet Converter

PCWA-DE50 $199.99*

Wireless LAN Access Point

PCWA-A500 $399.99*

PCWA-C500 $179.99*
PCGA-BP2NX PCGA-XXXX $249.99* $299.99*
PCWA-C300S PCWA-DE30 $99.99* $159.99*

2 2

PRGR2 PRGR2 PRGR2 PRGR1 or PRGR2 PRGT1 PRGT1 PRGT1 PRGT1 PRFX1

BP71A BP71A BP71A

BP2V BP2R BP2R BP2V BP2S/HI BP2T BP2S/HI BP4V BP4R BP4R BP4V BP4S Included Included in J Series PRV1 PRZ1

Integrated

Integrated Integrated
Prices are suggested retail prices Compatible with XP models only