Reviews & Opinions
Independent and trusted. Read before buy Sony PMC-DR50L!

Sony PMC-DR50L

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony PMC-DR50L, size: 1.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony PMC-DR50LAbout Sony PMC-DR50L
Here you can find all about Sony PMC-DR50L like manual and other informations. For example: review.

Sony PMC-DR50L manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony PMC-DR50L please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony PMC-DR50L photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 11. Page 1 of 1. Average Rating:
davidwon 7:47pm on Sunday, October 31st, 2010 
Hi, bought ZVW and it is going great. Although I urgently need accessories. Cases (leather and silicon), cradle dock, screen savers and remote.
costicapreotu 4:43am on Thursday, October 21st, 2010 
I got this in today, from New Jersey to Massachusetts took under 24 hours and I had 3 day delivery, Awesome timing NewEgg. Plays most xvid/divx files and MP3s. Does NOT play files encoded with AC3 audio.
chainsawed 3:43pm on Thursday, October 14th, 2010 
Like it! I really like this Zen 60gig. My wife and I put a ton of songs and SNL videos on it. Awesome Looks great, battery lasts basically a full day, extremely easy to use, great features. Worked good... for a while When i bought my zen i knew i wanted to get a case for it, so i bought this one, the factory creative one.
Rai 5:05pm on Sunday, October 10th, 2010 
soudn quality very solid graphic vey good user friendly no tv recording hope creative will make a firmware to make video recording
pjman 9:41pm on Wednesday, October 6th, 2010 
Can be used with Media Player, the Creative Vision Explorer, or their included software. The built in radio lacks range. While maybe a bit pricey at ~$400, the Vision W is a great little player. It plays the standard music files (MP3, WMA, etc.) with album art support.
bibon 1:32pm on Friday, October 1st, 2010 
Hi, bought ZVW and it is going great. Although I urgently need accessories. Cases (leather and silicon), cradle dock, screen savers and remote. Superb for videos and movies, easy drag-and-drop style and massive screen for subtitles. Good for subtitles A bit slow when fast-forwarding files Superb for videos and movies, easy drag-and-drop style and massive screen for subtitles. Good for subtitles A bit slow when fast-forwarding files
kubak 11:53pm on Tuesday, September 21st, 2010 
Track details. dont buy ipod...buy creative however, despite its wide video format support. Creative Zen Vision W 60 GB is an awesome digital media player. This device can be use to play movies. Compatibility, ZEN VISION W from Creative Sync Manager Sync Outlook tasks and contacts, such as databases, into a Personal Address Book Service.
Firebrand 10:19pm on Monday, August 2nd, 2010 
I have owned the Vision for 2 months now. I have been most satisfied with the player. Although I considered getting something a little smaller.
stuart 6:31pm on Friday, June 11th, 2010 
great video quality.in-built speakers none It comes with a super sharp multi-angle widescreen,a intergrated speaker that speaks loudly,features packed! The package comes even with a charger.
MikeGay 10:56am on Sunday, May 2nd, 2010 
The best player for videos. This is the best video player that I have ever owned. I absolutely love it. The screen display is terrific.
rlindau 10:08am on Thursday, March 11th, 2010 
I got the Vision almost six years ago, and it...  Sturdy, good sound quality, excellent screen resolution Bulky, heavy. I got the Vision almost six years ago, and it only now is starting to break down. As a clumsy person.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

PMC-DR50L/DR70L

SERVICE MANUAL

Ver 1.0 1999.09

AEP Model UK Model E Model

Tourist Model

PMC-DR50L

Photo : PMC-DR70L

TAPE Section CD Section
Model Name Using Similar Mechanism Tape Transport Mechanism Type Model Name Using Similar Mechanism MD Mechanism Type Optical Pick-up Type
NEW MF-PMCDR50 NEW KSM-213CCP KSS-213C

SPECIFICATIONS

Continued on page 2
PERSONAL COMPONENT SYSTEM

MICROFILM

5-5. SCHEMATIC DIAGRAM MAIN SECTION (1/3)
Refer to page 74 for IC Block Diagram.

r Waveforms

MAIN SECTION (1/3)

1.5Vp-p

VOLT/DIV : 0.5 V AC TIME/DIV : 5 msec

556mVp-p

4.332MHz
VOLT/DIV : 0.2 V AC TIME/DIV : 50 nsec
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. : internal component. U : B+ Line. H : adjustment for repair. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM ( ) : MW < > : LW Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. F : FM f : MW L : LW
5-6. SCHEMATIC DIAGRAM MAIN SECTION (2/3)
Refer to page 74 for IC Block Diagrams.
Refer to page 45 for Waveforms.
Refer to page 45 for Notes.
5-7. SCHEMATIC DIAGRAM MAIN SECTION (3/3)

MAIN SECTION (2/3)

60Vp-p
ATT : 1/10 VOLT/DIV : 1V AC TIME/DIV : 5 sec

15Vp-p

Q301 C
VOLT/DIV : 5 V AC TIME/DIV : 5 sec
Note on Schematic Diagram Main Section (2/3) : Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. H : adjustment for repair. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : COMMON (REC) ( ) : PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. F : FM E : PB a : REC J : CD
Note on Schematic Diagram Main Section (3/3) : Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Signal path. F : FM c : digital out
5-9. SCHEMATIC DIAGRAM CD SECTION
Refer to page 75 -76 for IC Block Diagrams.
Refer to page 55 for Waveforms.
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : CD STOP ( ) : CD PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. J : CD c : digital out
5-10. SCHEMATIC DIAGRAM CONTOROL SECTION

(CD SECTION)

Waveforms CONTROL SECTION

(PLAY MODE)

1.0 1.5Vp-p

4.8Vp-p

32.768kHz

IC701 # (RFO)

VOLT/DIV : 0.5 V AC TIME/DIV : 1 sec

IC801 $

VOLT/DIV : 1V AC TIME/DIV : 10 sec

2.5Vp-p

0.6Vp-p

IC(FEO)

VOLT/DIV : 1 V AC TIME/DIV : 1 msec
VOLT/DIV : 0.5V AC TIME/DIV : 50 nsec

0.7Vp-p

IC701 $ (TO)
VOLT/DIV : 20mV AC TIME/DIV : 1 msec

875mVp-p

0.1162MHz 8.6 sec

IC751 @ (PCO)

VOLT/DIV : 0.5 V AC TIME/DIV : 5 sec

4.7Vp-p

22.85 sec

IC751 #, $ (LRCK)

VOLT/DIV : 1 V AC TIME/DIV : 5 sec

271mVp-p

16.9344MHz

IC751 & (XTAO)

VOLT/DIV : 0.1V AC TIME/DIV : 20 nsec
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : RADIO (COMMON) ( ) : CD < > : REC [ ] : PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms.
5-13. SCHEMATIC DIAGRAM AMP SECTION
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. 2 : nonflammable resistor. Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. U : B+ Line. Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Signal path. F : FM
5-15. SCHEMATIC DIAGRAM WOOFER AMP SECTION (DR70L ONLY)
Refer to page 76 for IC Block Diagram.
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Signal path. F : FM

PCMDI 42

MIC I/EX

SENSE TIMING PULSE WIDTH

22 10k

19 LOGIC

16 10k
VCC OUT NOISE FILTER MUTING GND NFB IN

IC305 BA338

IC701 CXA1992BR

37 VEE 36

6k 10k

MONITOR AMP 7dB

MONITOR AMP 6k 7dB 10k

3 PRE AMP

PD2 IV AMP F. BIAS 40

COMPARATOR

PD1 IV AMP VCC
RF SUMMING AMP 26 APC VEE IIL TTL 24 SENS1 SENS2
VDD 61 SYSM 62 PWM SERIAL-IN INTERFACE 40 LRCKI 39 LRCK 38 ASYO 37 ASYI

S B+ TAPE Q R F.F.

AVSS 63 LASER POWER CONTROL OVER SAMPLING DIGITAL FILTER AVDD 64 EFM DEMODULATOR ASYMMETRY CORRECTOR

10k 10k

TAPE BUF AMP A1 10k

BUF AMP B1

BUF AMP B2
F IV AMP VCC E IV AMP IFB2 IFB3 IFB4

VCC VCC

BUF AMP A2 10k 10k 10k MUTE

MIC AMP1 COMPARATOR

FE AMP

C. OUT

EXCK SBSO SCOR

DOUT C4M XTSL C2PO

IC Block Diagrams MAIN SECTION (2/3) IC301 TA2068N
IC Block Diagrams CD SECTION

IC751 CXD2589Q

36 BIAS 35 RF
VEE IFB5 IFB1 IFB6 DFCT VEE LEVEL S VEE VEE FO. BIAS WINDOW COMP. TRK. GAIN WINDOW COMP. E-F BALANCE WINDOW COMP. FOH FOL TGH TGL BALH BALL ATSC TZC FZC FOK 22 VCC MIRR IIL TTL DATA 23 XRST AOUT1 AIN1 LOUT1 AVSS XVDD XTAI 3rd-ORDER NOISE SHAPER

NAB AMP1

26dB REC AMP1 DET

26dB REC AMP2 2.1

NAB AMP2 10k

BAL2 BAL3 BAL4

VEE TOG1 TOG2 TOG3 TOG4 GND 44

34 AVDD

33 CLTV TIMING LOGIC SUB CODE PROCESSOR PWM ERROR CORRECTOR 16K RAM DIGITAL PLL 32 AVSS 31 FILI 30 FILO

REF AMP

TTL IIL CC1

MIC NF

LPFI 46

XTAO 71

IIL DATA REGISTER, INPUT SHIFT REGISTER, ADDRESS DECODER, SENS SELECTOR, OUTPUT DECODER VCC
XVSS 72 DIGITAL OUT D/A INTERFACE

29 PCO

ATSC 48
VCC AVSS 73 OSC 28 VCTL 27 V16M

IC302 BH3854AFS

FILTER LATCH DVN2 BVO2 DATA OUT2 TVO2 VREF BIN2 TIN2 CLK NF2 IN2 VC BC TC TZC 49
ATSC WINDOW COMP. DFCT TM1 TRACKING PHASE COMPENSATION

27 TONE

17 TDFCT 50

TZC COMP.

DFCTO IFB1-6 FS1-4 BAL1-4 TOG1-4

TG1-2 TM1-7 PS1-4

ISET LOUTAINAOUTAVDD 77 CLOCK GENERATOR 26 VCKI 25 VPCO 24 TESTEST
VCC VCC VR MATRIX SURROUND VR FZC 52 TONE DFCT 1 AGND 2 INNFBVNBINBVOTINTVOOUTVCC 11 SC 12 PORTPORTPORTPORTDGND FZC COMP. FS4 VEE 1 FEO 2 FEI 3 FDFCT 4 FGD 5 FLB 6 FE_O 7 FE8 SRCH 9 TGU 10 TGFSET 12 TEFS2 Charge up FSET TG2 CONTROL VC 51 VCC VEE FOCUS PHASE COMPENSATION VCC FS1 TG1 TM4

VCC 16 SLO

15 TM7 TM3 VEE VEE TMTM2

AVSS 78 XRST 79

CPU INTERLACE SERVO AUTO SEQUENCER

22 PWMI DIGITAL CLV 21 MDP

SL+ VDD 80

LMUTE RMUTE

4 SQCK

5 SQSO

6 SENS

7 DATA

8 XLAT

9 CLOK

10 SEIN

11 CNIN

12 DATO

13 XLTO

14 CLKO

15 SPOA

16 SPOB

17 XLON

18 FOK

19 VDD

20 VSS

13 TEO

IC651 TA8409S

IC702 BA6898FP

VREFI SPIN GND VCC VCC

IC Block Diagrams WOOFER AMP SECTION

22 VCC

21 VCC

STANDBY BLOCK

VREF BLOCK

IC601 TDA2052

LEVEL SHIFT
T. S. D. REGULATOR, BIAS, T. S. D. MONITOR LEVEL SHIFT D 1

DRIVER MUTE

MUTE/ ST-BY 2

MUTE/ STANDBY

VEE IN1+ IN IN2+

LEVEL SHIFT D 3

HEAT CUT OFF BLOCK
SPO 1 INVCC 3 OUTNC 5 GND 6 VS 7 OUTVREF 9 IN1

doc1

PMC-DR50L/DR70L

SERVICE MANUAL

Ver 1.0 1999.09

AEP Model UK Model E Model

Tourist Model

PMC-DR50L

Photo : PMC-DR70L

TAPE Section CD Section
Model Name Using Similar Mechanism Tape Transport Mechanism Type Model Name Using Similar Mechanism MD Mechanism Type Optical Pick-up Type
NEW MF-PMCDR50 NEW KSM-213CCP KSS-213C

SPECIFICATIONS

Continued on page 2
PERSONAL COMPONENT SYSTEM

MICROFILM

TABLE OF CONTENTS

Specifications... 1

4. ADJUSTMENTS
4-1. Mechanical Adjustments.. 20 4-2. Electrical Adjustments... 20
1. SERVICE NOTE... 3 2. GENERAL... 4 3. DISASSEMBLY
3-1. Case(bottom), Cover ASSY, Top. 6 3-2. CD ASSY... 7 3-3. Main Board, Jack Board.. 7 3-4. Tray... 8 3-5. ASP Board... 8 3-6. Belt... 9 3-7. Motor Board, Loding Motor (M651). 9 3-8. Optical Pick-up Block.. 10 3-9. Mechanism Deck.. 10 3-10. TC RF Board, Head Relay Board, Capstan/Reel Motor (M160).. 11 3-11. Control Board... 11 3-12. Display Board.. 12 3-13. DSP Board, CPU board.. 12 3-14. VOL Board... 13 3-15. Cabinet, Wood, Cabinet (R) Bottom.. 13 3-16. Speaker (R-CH) (SP101).. 14 3-17. Power Board... 14 3-18. AMP Board, AMP IC Board.. 15 3-19. Speaker Board... 15 3-20. Cabinet, Wood, Cabinet (L) Bottom. 16 3-21. Speaker (L-CH) (SP201).. 16 3-22. Power Transfomer Board.. 17 3-23. SP Main Board, SP AMP IC Board. 17 3-24. AC Outlet Board, SP Jack Board.. 18 3-25. Cabinet (SWF) Bottom.. 18 3-26. Speaker (SP601), Cabinet, Front.. 19 3-27. LED Board, Volume Board.. 19

5. DIAGRAMS

5-1. Explanation of IC Terminals.. 5-2. Block Diagrams CD, Tuner Section .. 5-3. Block Diagrams Tape, Main Section.. 5-4. Printed Wiring Boards Main Section.. 5-5. Schematic Diagram Main Section (1/3) . 5-6. Schematic Diagram Main Section (2/3) . 5-7. Schematic Diagram Main Section (3/3) . 5-8. Printed Wiring Boards CD Section . 5-9. Schematic Diagram CD Section .. 5-10. Schematic Diagram Control Section . 5-11. Printed Wiring Boards Control Section . 5-12. Printed Wiring Boards AMP Section . 5-13. Schematic Diagram AMP Section .. 5-14. Printed Wiring Boards Woofer AMP Section . 5-15. Schematic Diagram Woofer AMP Section . 71

6. EXPLODED VIEWS

6-1. Case Section... 6-2. Control Section.. 6-3. CD Mechanism Section.. 6-4. Mechanism Deck Section -1.. 6-5. Mechanism Deck Section -2.. 6-6. CD Optical Pick-up Section.. 6-7. Speaker (R-CH) Section... 6-8. Speaker (L-CH) Section (DR50L Only).. 6-9. Speaker (L-CH) Section (DR70L Only).. 6-10. Super Woofer Section (DR70L Only).. 85 86
7. ELECTRICAL PARTS LIST.. 87

SECTION 1 SERVICE NOTE

Information For customers in Europe NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe more than 30 cm away from the objective lens.
This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located at the bottom of the player. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. Notes on chip component replacement Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat.

LASER DIODE AND FOCUS SEARCH OPERATION CHECK 1. Close the Tray for CD. 2. Press CD ^ button. 3. Confirm the laser diode emission while observing the objecting lens. When there is no emission, Auto Power Control circuit or Optical Pick-up is broken. Objective lens moves up and down once for the focus search. ABOUT THE EXTENSION CABLE JIG Extention cable jigs (1-792-164-11 and 1-792-165-11) are necessary when repair this unit.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
Jig (19 core) (1-792-165-11)
Jig (20 core) (1-792-164-11)
Main board (CN804) ASP board (CN702)

SECTION 2 GENERAL

LOCATION AND FUNCTION OF CONTROLS

MAIN UNIT

! 5 ! ! ! ! ! ! 2 1
1 VOLUME +, buttons 2 CD tray 3 Timer buttons STANDBY SLEEP CLOCK TIMER DISPLAY 4 Display window 5 OPERATE button 6 RDS button (Headphones) Jack 8 DIR MODE button 9 COUNTER RESET button ! TAPE operation buttons r/P (rec/pause) DUBBING 0, ) (FF, REW) , (play) (stop)
! PLAY MODE, MONO/ST ISS button ! ENTER/MEM, PGM SET button ! =() , +(+) TUNE TIME SET button ! LINE IN button ! SUMER TIME button ! MEGA BASS button ! SOUND button ! 6 CD OPEN/CLOSE button ! RADIO operation buttons PRESET + BAND PRESET @ CD operation buttons (play/pause) (stop) @ SNOOZE button @ Remote sensor

Remote commander

1 DISPLAY button
DISPLAY TA SEARCH OPERATE
2 TA SEARCH button 3 OPERATE button 4 Number buttons 5 MEGA BASS button

CD/RADIO

6 VOLUME +, buttons 7 SOUND button 8 CD operation buttons =, +(AMS, search)

MODE RADIO VOL MEGA/BASS

( (play) P (pause) p (stop) 9 TAPE operation buttons p (stop) , (play) r/P (rec/pause) 0, ) (FF, REW) ! RADIO operation buttons TUNE + TUNE BAND ! MODE button

HOOKING UP THE SYSTEM

(PMC-DR50L) (PMC-DR70L)

SECTION 3 DISASSEMBLY

The equipment can be removed using the following procedure.
Case(bottom) CD ASSY Main board, Jack board Tray ASP board
Belt Optical pick-up block
Main unit Motor board, Loading motor (M651) Cover ASSY, top Mechanism deck Control board Cabinet, wood Cabinet (R) bottom Cabinet, wood Cabinet (L) bottom Cabinet (SWF) bottom TC RF board, Head relay board, Capstan/reel motor (M160) Display board VOL board DSP board, CPU board

2 Wire, parallel (18 core)

CPU board

Holder, Display PC board
3 Wire, parallel (19 core)

Display board

3-13. DSP BOARD, CPU BOARD
4 Wire, parallel (14 core)

2 Support

Screws (+BVTT 2.6x8)
5 Wire, parallel (18 core)
6 Wire, parallel (19 core)
Holder, Display PC board Display board

3-14. VOL BOARD

1 Claws

Panel ASSY, front

Case (top)

VOL board

3 Screws (+BVTT 2.6x8)
< SPEAKER UNIT (R-CH) >
3-15. CABINET, WOOD, CABINET (R) BOTTOM

2 Screws (+P 4x16)

Cabinet, Wood

Cabinet (R) bottom

Sponge, back board Note : Change a Sponge, back board (3-042-179-01) for a new article when remove the cabinet (R) bottom.

1 Screws (+P 4x16)

3-16. SPEAKER (R-CH) (SP101)

4 Screws

Stand, Grill

2 Screws (+BVTT 4x10) 3

Cabinet, Wood Speaker (SP101)
Sub panel (R) ASSY Stand, Grill Speaker grill ASSY

2 Screws (+BVTT 4x10)

3-17. POWER BOARD

Power board

Bracket, Transfomer

1 Screws (+P 4x10)

3-18. AMP BOARD, AMP IC BOARD

3 Screws (3x10) 4

AMP board

1 Screws (+BVTT 3x12)

AMP IC board

3-19. SPEAKER BOARD

Speaker board
4 Screws (+BVTT 3x8) 6 Screws (+BVTT 3x8)

2 Screws (+BVTT 3x8)

Cord with connector Stopper, wire
Cord, AC Stopper, cord Airtight clipper Bracket
< SPEAKER UNIT (L-CH) > (DR70L)
3-20. CABINET, WOOD, CABINET (L) BOTTOM
Cabinet (L) bottom Sponge, back board Note : Change a Sponge, back board (3-042-179-01) for a new article when remove the cabinet (L) bottom.
3-21. SPEAKER (L-CH) (SP201)

Speaker (SP201)

Sub panel (L) ASSY Stand, Grill Speaker grill ASSY
3-22. POWER TRANSFOMER BOARD
Power transformer board Bracket, Transfomer
3-23. SP MAIN BOARD, SP AMP IC BOARD

SP AMP IC board

1 Screw

SP main board

Cabinet (L) bottom

1 Screws (+BVTT 3x8)

3-24. AC OUTLET BOARD, SP JACK BOARD

3 Screws (+BVTT 3x8)

AC outlet board

6 Screw (+BVTT 3x8)

SP jack board Cord, AC Board (L) back Bracket
Stopper, cord Airtight clipper
< SUPER WOOFER UNIT > (DR70L)
3-25. CABINET (SWF) BOTTOM

Cabinet (SWF) wood

Cabinet (SWF) bottom
3-26. SPEAKER (SP601), CABINET, FRONT

Speaker (SP601)

4 Screws (+P 4x16)
3 Pull up a airtight clipper. 5

Cabinet, front

3-27. LED BOARD, VOLUME BOARD
1 Hang thread in a circumuference of Knob ASSY, VOL, and pull it up

4 Screws (+PWH 3x10)

Volume board Thread

3 Nut and waher

LED board

Chassis (SWF) sub

6 Screws (+BVTT 3x8)
Knob ASSY, VOL Cabinet, front

SECTION 4 ADJUSTMENTS

4-1. MECHANICAL ADJUSTMENTS

TAPE RECORDER SECTION

PRECAUTION
Record/Playback/Erase Head Azimuth Adjustment Procedure : 1. Mode : FWD playback
test tape P-4-A100 (10kHz, 10dB) level meter 47k set LINE OUT (JK301)
1. Clean the following parts with a denatured-alcohol-moistened swab : record/playback/erase head pinch roller rubber belts capstan 2. Demagnetize the record/playback head with a head demagnetizer. 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage unless otherwise noted. Torque Measurement
Torque Forward Forward Back Tension Reverse Reverse Back Tension FF/REW Torque Meter CQ-102C CQ-102C CQ-102RC CQ-102RC CQ-201B Meter Reading 36 to 61 g cm (0.5 to 0.84 oz inch) 2 to 6 g cm (0.028 to 0.083 oz inch) 36 to 61 g cm (0.5 to 0.84 oz inch) 2 to 6 g cm (0.028 to 0.083 oz inch) 61 to 143 g cm (0.85 to 1.98 oz inch)
2. Turn the adjustment screw for the maximum output levels. If these levels do not match, turn the adjustment screw until both of output levels match together within 1dB.
L-CH peak within output 1 dB level

within 1 dB

Screw position

R-CH peak

screw position L-CH peak R-CH peak

Tape Tension Measurement

Mode FWD REV Tension Meter CQ-403A CQ-403A Meter Reading more than 100g (more than 3.53 oz) more than 100g (more than 3.53 oz)
3. Phase Check Mode : FWD playback
test tape P-4-A100 (10kHz, 10dB) Osilloscope
4-2. ELECTRICAL ADJUSTMENTS
TAPE RECORDER SECTION 0dB = 0.775V
47k LINE OUT (JK301) screen pattern
1. The adjustnemts should be performed in the order in the service manual. (As a general rule playback circuit adjustment should be completed beforeming recording circuit adjustment.) 2. The adjustments should be performed for bothe L-CH and RCH unless otherwise indicated. Standard Intput Level
Input terminal source impedance input signal level LINE IN 10k 0.5V (3.8dB)

in phase 45 good

4. Change the reverse playback mode and repeat the step 1 to 3. 5. After the adjustment, lock the adjustment screw with suitable locking compound. Adjustment Location : record/playback/erase head

5-8. PRINTED WIRING BOARDS CD SECTION
Refer to page 25 for Circuit Boards Location.
Ref. No. IC651 IC701 IC702 IC751 Q701 Q751 Q752 Q753 Q754 Q755 Location F-4 B-4 E-1 C-9 C-1 D-11 C-11 B-10 B-9 D-10

[DSP BOARD]

(RFO) (VC)

[ASP BOARD]

J701(5V) R710
J770 R793 R757 R758 R759 R760

C723 C721

R740 R741 R742

C717 R720 R722

R709 R711 R707 C715

J734 R717

J733 (TEO)
J731 (VC) C705 C726 J730 (5V)

C708 R712 C710

C722 R732 R718

J706 C725

CPU BOARD CN806 (Page 60)

CN752 CN754

X65 61

R753 J774 R761 J775 C761

R764 R763

R704 J732

C737 R727
R790 C783 R785 R783 R781 CNC785 R787 E C B R789 E C B

Q755 R799 Q751

C788 C787

15 C30 C45 50

C781 J765

C740 R716 R714 CN5

C733 C714 R733 J707

C713 C716

J729 (5V)

C738 J709 6

1-676-293-

C763 J754

R767 C762

R768 R769 J755 J756

R771 J758

M701 SLED MOTOR

1 S701 (LIMIT)
MAIN BOARD CN302 (Page 37)

R797 R798

15 RC731

R747 R744

1-676-104-

C25 22

CA20 15

C736 J725

M702 SPINDLE M MOTOR
JACK BOARD CN313 (Page 35) M651 LOADING MOTOR
OPTICAL PICK-UP KSS-213C F

J651 J652

R652 L651

CN651 C651 1

Note on Printed Wiring Boards: Note: X : parts extracted from the component side. b : Pattern from the side which enables seeing.
S651 (CD TRAY) CLOSE OPEN

[MOTOR BOARD]

1-676-294-
5-9. SCHEMATIC DIAGRAM CD SECTION
Refer to page 75 -76 for IC Block Diagrams.
Refer to page 55 for Waveforms.
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : CD STOP ( ) : CD PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. J : CD c : digital out

5-10. SCHEMATIC DIAGRAM CONTOROL SECTION

(CD SECTION)

Waveforms CONTROL SECTION

(PLAY MODE)

1.0 1.5Vp-p

4.8Vp-p

32.768kHz

IC701 # (RFO)

VOLT/DIV : 0.5 V AC TIME/DIV : 1 sec

IC801 $

VOLT/DIV : 1V AC TIME/DIV : 10 sec

2.5Vp-p

0.6Vp-p

IC(FEO)

VOLT/DIV : 1 V AC TIME/DIV : 1 msec
VOLT/DIV : 0.5V AC TIME/DIV : 50 nsec

0.7Vp-p

IC701 $ (TO)
VOLT/DIV : 20mV AC TIME/DIV : 1 msec

875mVp-p

0.1162MHz 8.6 sec

IC751 @ (PCO)

VOLT/DIV : 0.5 V AC TIME/DIV : 5 sec

4.7Vp-p

22.85 sec

IC751 #, $ (LRCK)

VOLT/DIV : 1 V AC TIME/DIV : 5 sec

271mVp-p

16.9344MHz

IC751 & (XTAO)

VOLT/DIV : 0.1V AC TIME/DIV : 20 nsec
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : RADIO (COMMON) ( ) : CD < > : REC [ ] : PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms.
5-11. PRINTED WIRING BOARDS CONTOROL SECTION
MAIN BOARD CN304 (Page 37) 11 JACK BOARD CN304 (Page 35) 12
Ref. No. D801 D802 D809 D810 D811 Location B-3 B-3 D-7 D-11 D-8 D-9 D-10 D-9 D-9 D-10 E-8 E-9 E-10 E-9 E-9 E-10 D-8 D-9 D-10 D-9 D-9 D-10 B-9

[CPU BOARD]

RB5 CNCNCNCN18

[CONTROL BOARD]

D896 C896
J851 L803 Q896 E C B 1 Q807 B C E 5 Q806 B C E CN304 Q808 E C B 1
MAIN BOARD CN811 (Page 37)

J811 J812

R824 C823
5 RA805 C805 C807 RA804 7
MAIN BOARD CN812 (Page 37)

S828 ENTER/MEM PGM SET

S827 PLAY MODE MONO/ST ISS

R809 R808

C824 J806

Ref. No. D401 D402 D403 D404 D501 D502 D503 D504 IC309 Q401 Location E-3 E-2 F-4 E-2 F-7 E-7 E-7 E-7 A-3 E-4
CN514 R184 R283 R284 C184 J511 R383 C181 C387 R182 C385 pC388 C381 RCR381 C386 C281 R282 R281 J501 CN3 CN5 CCN513

[AMP IC BOARD]

18 CNJ10 C1 IC309 C282 CN513 1

[POWER BOARD]

T501 POWER TRANSFORMER

1-676-252-

[AMP BOARD]

C + SP101 SPEAKER R-CH

C285 J513
* NOT REPLACEABLE: BUILT IN TRANSFORMER

CN503 1

CN503 POWER OUT TO MAIN UNIT
5 J520 CND404 C409 R404 RC407 C408
JACK BOARD CN311 (Page 35)

D504 C504 D503 C503

6 C411
5 C412 C406 Q401 E C B J521
D502 C405 C502 D501 D403 C501

CNP501 AC IN

D402 C401

D401 C404

1-676-253-

1-676-255-

[SPEAKER BOARD]
CN1 CN510 C186 C286 J503 J502 R502 C506 R503

1-676-254H

L SIGNAL INPUT JK502

SPEAKER OUT L-CH JK501

Note: X : parts extracted from the component side. p : parts mounted on the conductor side. b : Pattern from the side which enables seeing.
5-13. SCHEMATIC DIAGRAM AMP SECTION
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. 2 : nonflammable resistor. Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. U : B+ Line. Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Signal path. F : FM
5-14. PRINTED WIRING BOARDS WOOFER AMP SECTION (DR70L ONLY)
Ref. No. D601 D602 D603 D604 D606 D607 D608 D609 D610 LED611 IC601 Q601 Q602 Q603 Q604 Q605 Q606 Q607 Q608 Q609 Q610 Q611 Q612 Q613 Q615 Location F-9 F-10 F-10 F-11 B-5 B-6 B-6 E-6 D-5 D-3 D-8 B-5 C-5 C-6 C-4 D-5
L-CH SPEAKER UNIT (DR70L)

[SP MAIN BOARD]

R652 D606 R653 Q612 B C E C619 R626 B C E Q615 R638 C616
[POWER TRANSFORMER BOARD]

T601 POWER TRANSFORMER

CNC669 5

Q601 B C E

R650 C609

D607 D608

C614 R622 R620 E C B Q607
R617 Q606 C612 R645 R646 R615 C641 C611 R616 C610 Q602 R651 C617 B C E
J606 R609 R608 C606 J602 Q605 R606 C698 C603
C-6 C-7 B-7 E-5 B-6 E-4 B-6 D-4 B-6

WOOFER UNIT (DR70L)

B C E J608

[SP AMP IC BOARD]

[LED BOARD]

LED611 LEVEL D

J607 CNCNICCN604 C2

R607 C605 R654 C620

J603 Q611 S D G CNR634 C633 5
CND609 R647 R636 R637 R601

[VOLUME BOARD]

1-676-248+

R655 CN2

[SP JACK BOARD]

1-676-2491 CN611 5

4 CN613

1-676-256G

1-676-250-

P601 (VOLUME IN)

SP601 SPEAKER (WOOFER)
WOOFER OUT 4 IMPEDANCE USE 6 JK604

SPEAKER IN L-CH

VR601 LEVEL

SP201 SPEAKER L-CH

KH603 1

1-676-257-

CA602 C601

Q613 D S G

J605 R602

CN606 F602 F603

1-676-42511 (11)

[AC OUTLET BOARD]

JK602 VOLUME OUT WOOFER

JK601 SIGNAL IN BASS

JK605 AC OUTLET MAX 50W (UNSWITCHED) AC230V ~50Hz

1-676-251-

5-15. SCHEMATIC DIAGRAM WOOFER AMP SECTION (DR70L ONLY)
Refer to page 76 for IC Block Diagram.
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. U : B+ Line. Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : FM Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Signal path. F : FM

PCMDI 42

MIC I/EX

SENSE TIMING PULSE WIDTH

22 10k

19 LOGIC

16 10k
VCC OUT NOISE FILTER MUTING GND NFB IN

IC305 BA338

IC701 CXA1992BR

37 VEE 36

6k 10k

MONITOR AMP 7dB

MONITOR AMP 6k 7dB 10k

3 PRE AMP

PD2 IV AMP F. BIAS 40

COMPARATOR

PD1 IV AMP VCC
RF SUMMING AMP 26 APC VEE IIL TTL 24 SENS1 SENS2
VDD 61 SYSM 62 PWM SERIAL-IN INTERFACE 40 LRCKI 39 LRCK 38 ASYO 37 ASYI

S B+ TAPE Q R F.F.

AVSS 63 LASER POWER CONTROL OVER SAMPLING DIGITAL FILTER AVDD 64 EFM DEMODULATOR ASYMMETRY CORRECTOR

10k 10k

TAPE BUF AMP A1 10k

BUF AMP B1

BUF AMP B2
F IV AMP VCC E IV AMP IFB2 IFB3 IFB4

VCC VCC

BUF AMP A2 10k 10k 10k MUTE

MIC AMP1 COMPARATOR

FE AMP

C. OUT

EXCK SBSO SCOR

DOUT C4M XTSL C2PO

IC Block Diagrams MAIN SECTION (2/3) IC301 TA2068N
IC Block Diagrams CD SECTION

IC751 CXD2589Q

36 BIAS 35 RF
VEE IFB5 IFB1 IFB6 DFCT VEE LEVEL S VEE VEE FO. BIAS WINDOW COMP. TRK. GAIN WINDOW COMP. E-F BALANCE WINDOW COMP. FOH FOL TGH TGL BALH BALL ATSC TZC FZC FOK 22 VCC MIRR IIL TTL DATA 23 XRST AOUT1 AIN1 LOUT1 AVSS XVDD XTAI 3rd-ORDER NOISE SHAPER

NAB AMP1

26dB REC AMP1 DET

26dB REC AMP2 2.1

NAB AMP2 10k

BAL2 BAL3 BAL4

VEE TOG1 TOG2 TOG3 TOG4 GND 44

34 AVDD

33 CLTV TIMING LOGIC SUB CODE PROCESSOR PWM ERROR CORRECTOR 16K RAM DIGITAL PLL 32 AVSS 31 FILI 30 FILO

REF AMP

TTL IIL CC1

MIC NF

LPFI 46

XTAO 71

IIL DATA REGISTER, INPUT SHIFT REGISTER, ADDRESS DECODER, SENS SELECTOR, OUTPUT DECODER VCC
XVSS 72 DIGITAL OUT D/A INTERFACE

29 PCO

ATSC 48
VCC AVSS 73 OSC 28 VCTL 27 V16M

IC302 BH3854AFS

FILTER LATCH DVN2 BVO2 DATA OUT2 TVO2 VREF BIN2 TIN2 CLK NF2 IN2 VC BC TC TZC 49
ATSC WINDOW COMP. DFCT TM1 TRACKING PHASE COMPENSATION

27 TONE

17 TDFCT 50

TZC COMP.

DFCTO IFB1-6 FS1-4 BAL1-4 TOG1-4

TG1-2 TM1-7 PS1-4

ISET LOUTAINAOUTAVDD 77 CLOCK GENERATOR 26 VCKI 25 VPCO 24 TESTEST
VCC VCC VR MATRIX SURROUND VR FZC 52 TONE DFCT 1 AGND 2 INNFBVNBINBVOTINTVOOUTVCC 11 SC 12 PORTPORTPORTPORTDGND FZC COMP. FS4 VEE 1 FEO 2 FEI 3 FDFCT 4 FGD 5 FLB 6 FE_O 7 FE8 SRCH 9 TGU 10 TGFSET 12 TEFS2 Charge up FSET TG2 CONTROL VC 51 VCC VEE FOCUS PHASE COMPENSATION VCC FS1 TG1 TM4

VCC 16 SLO

15 TM7 TM3 VEE VEE TMTM2

AVSS 78 XRST 79

CPU INTERLACE SERVO AUTO SEQUENCER
22 PWMI DIGITAL CLV 21 MDP

SL+ VDD 80

LMUTE RMUTE

4 SQCK

5 SQSO

6 SENS

7 DATA

6-5. MECHANISM DECK SECTION-2 (MF-PMCDR50)

226 227

230 206

217 216

HRPE101
Ref. No. Part No. 3-029-573-01 3-029-576-01 3-029-574-01 3-029-575-01 3-029-608-01 3-029-617-01 3-029-607-01 3-029-570-01 3-029-604-01 3-029-616-01 3-938-941-01 3-034-598-01 3-029-606-01 3-029-609-01 3-029-580-01 Description LEVER (HD) PINCH, ROLLER PINCH (R), CAP PINCH (L), CAP SPRING SCREW SPRING FRAME (HD) SPRING SCREW SCREW (A) SPRING, AZIMUTH SPRING SPRING LEVER (ST) Remark Ref. No. * 229 * 230 Part No. 3-029-577-01 3-029-578-01 3-029-602-01 3-029-579-01 3-029-624-01 3-029-582-01 3-029-615-01 3-029-581-01 3-029-603-01 3-029-585-01 3-029-584-01 3-029-610-01 3-029-586-01 1-673-339-11 Description PLATE (D) REEL, CAP SPRING REEL, GEAR WASHER BRAKE, LEVER SCREW GUIDE (C) SPRING ARM(SW) ARM(CS) SPRING CHASSIS, MECHANISM HEAD RELAY BOARD Remark

3-029-614-01 SCREW

231 3-029-583-01 FRAME (A) HRPE1011-500-601-11 HEAD, REC/PB (RECORD/PLAYBACK/ERASE)
6-6. CD OPTICAL PICK-UP SECTION (KSM-213CCP)

not s upplied

252 256

(including M702) M702

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. 253 ! Part No. 2-626-908-01 2-627-003-02 2-626-907-02 8-848-483-05 X-2626-202-1 Description Remark Ref. No. 256 M701 Part No. Description Remark
SHAFT, SLED GEAR (B) (RP) GEAR (A) OPTICAL PICK-UP KSS-213C MOTOR SHASSIS ASSY (MB) (INCLUDING M702) (SPINDLE)
3-713-786-51 SCREW +P 2X3 X-2625-769-1 MOTOR GEAR ASSY (MB) (INCLUDING GEAR) (SLED)
6-7. SPEAKER (R-CH) SECTION

311 312

SP101 not supplied #14 #9 #9

#14 not supplied

315 301
#12 not supplied #13 #13 #15

314 317

#10 #10

318 302

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Remark Ref. No. * 312 * 313 * ! 318 ! F501 SP101 ! T501 Part No. 1-676-255-11 3-042-179-01 3-042-178-01 1-792-188-11 1-791-929-11 3-042-186-01 3-042-181-01 1-532-505-11 1-529-581-11 Description POWER BOARD SPONGE, BACK BOARD FOOT, RUBBER CORD WITH CONNECTOR CORD, AC STOPPER, WIRE STOPPER, CORD FUSE,TIMELUG (T5AL/250V) SPEAKER (15W) (R-CH) Remark

D814 D815 D816 D821 D822

D823 D824 D825 D826 D831

D832 D833 D834 D835 D836

1-247-807-11 CARBON 1-249-399-11 CARBON < SWITCH >
S809 S810 S811 S812 S813 S814 S815 S816 S817 S818 S819 S820 S821
1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11
SWITCH, TACT (TAPE )) SWITCH, TACT (TAPE 0) SWITCH, TACT (DUBBING) SWITCH, TACT (r/P) SWITCH, TACT (COUNTER RESET) SWITCH, TACT (DIR MODE) SWITCH, TACT (RDS) SWITCH, TACT (OPERATE) SWITCH, TACT (CD ) SWITCH, TACT (CD )
< JACK > JK151 1-793-855-11 JACK, HEADPHONE (2) < TRANSISTOR > Q806 Q807 Q808 8-729-049-00 TRANSISTOR 2SA733P 8-729-049-00 TRANSISTOR 2SA733P 8-729-119-78 TRANSISTOR 2SC403SP-51
1-771-839-11 SWITCH, TACT (PRESET - ) 1-771-839-11 SWITCH, TACT (BAND) 1-771-839-11 SWITCH, TACT (PRESET + )
Ref. No. S822 S823 S824 S825 S826 S827 S828 Part No.
Description Remark Ref. No. C850 C851 C852 C853 C854 C855 C856 C857 C858 C859 C860 C865 Part No. 1-102-106-00 1-102-106-00 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 1-102-106-00 1-102-106-00 Description CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 100PF 100PF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 100PF 100PF 100PF 0.1uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 50V 50V 16V 16V 16V 16V 16V 16V 50V 50V 50V 50V
1-771-839-11 SWITCH, TACT (TAPE ) 1-771-839-11 SWITCH, TACT (TAPE ) 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 1-771-839-11 SWITCH, TACT (TAPE ) SWITCH, TACT (TUNE TIME SET +) SWITCH, TACT (TUNE TIME SET =) SWITCH, TACT (PLAY MODE MONO/ST ISS) SWITCH, TACT (ENTER/MEM PGM SET)
S829 1-771-839-11 SWITCH, TACT (LINE IN) S830 1-771-839-11 SWITCH, TACT (SOUND) S831 1-771-839-11 SWITCH, TACT (MEGA BASS) S832 1-771-839-11 SWITCH, TACT (SUMMER TIME) S833 1-771-839-11 SWITCH, TACT (6 CD OPEN/CLOSE) ************************************************************** * A-3323-381-A CPU BOARD, COMPLETE ******************** < CAPACITOR > C802 C803 C805 C807 C808 C809 C810 C811 C812 C813 C814 C815 C816 C817 C818 C819 C820 C821 C822 C823 C824 C825 C826 C827 C828 C829 C831 C832 C833 C834 C835 C836 C837 C838 C839 C845 C846 C847 C848 C849 1-102-106-00 1-164-095-11 1-164-095-11 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-137-399-11 1-137-399-11 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-102-106-00 1-164-095-11 1-124-907-11 1-164-097-11 1-128-956-11 1-104-666-11 1-164-097-11 1-124-472-11 1-162-206-31 1-162-206-31 1-162-211-31 1-162-211-31 1-164-095-11 1-164-095-11 1-162-201-31 1-162-201-31 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 1-164-095-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC FILM FILM CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC ELECT CERAMIC DOUBLE LAYER ELECT CERAMIC ELECT CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 100PF 0.01uF 0.01uF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 0.1 0.1 100PF 100PF 100PF 100PF 100PF 100PF 0.01uF 10uF 0.022uF 0.33uF 220uF 0.022uF 470uF 20PF 20PF 33PF 33PF 0.01uF 0.01uF 12PF 12PF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 50V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50V 100V 100V 50V 50V 50V 50V 50V 50V 16V 50V 5.5V 10V

< FUSE > ! F601 !F602 ! F603 1-532-501-11 FUSE,TIMELUG (T0.8AL/250V) 1-532-465-11 FUSE,TIMELUG (T3.15AL/250V) 1-532-465-11 FUSE,TIMELUG (T3.15AL/250V) < TRANSFORMER > ! T601 1-435-239-11 TRANSFORMER, POWER **************************************************************

50V 50V 50V

1-676-425-11 SP AMP IC BOARD (DR70L) *************** 3-042-199-01 SHEET, MICA < IC >
IC601 8-759-072-99 IC TDA2052 ************************************************************** * 1-676-250-11 SP JACK BOARD (DR70L) ************* < CONNECTOR > CN611 1-779-693-11 CONNECTOR (WIRE HOLDER) 5P <JACK > JK601 JK602 JK604 1-794-074-11 RCA JACK (SIGNAL IN BASS) 1-794-075-11 LINE JACK (VOLUME OUT WOOFER) 1-694-657-11 SPEAKER TERMINAL (WOOFER OUT, SPEAKER IN L-CH) < RESISTOR > R635 1-249-413-11 CARBON 470 5% 1/4W ************************************************************** * A-3322-400-A SP MAIN BOARD, COMPLETE (DR70L) ************************ < CAPACITOR > C601 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 C613 C614 C615 1-137-399-11 1-126-233-11 1-126-233-11 1-124-907-11 1-126-963-11 1-124-903-11 1-130-493-00 1-104-666-11 1-130-493-00 1-136-899-11 1-124-907-11 MYLAR ELECT ELECT ELECT ELECT ELECT MYLAR ELECT MYLAR MYLAR ELECT 0.1uF 22uF 22uF 10uF 4.7uF 1uF 0.068uF 220uF 0.068uF 0.47uF 10uF 1uF 4.7uF 4.7uF 100V 50V 50V 50V 50V 50V 50V 25V 50V 50V 50V 50V 50V 50V
< FUSE > ! F501 1-532-505-11 FUSE, TIME LUG (T5AL/250V) < LINE FILTER > ! LF501 1-411-910-11 TRANSFORMER, LINE FILTER (LFT) < TRANSFORMER > ! T501 1-453-339-11 TRANSFORMER, POWER
************************************************************** * 1-676-249-11 POWER TRANSFORMER BOARD (DR70L) ************************** 1-533-233-31 HOLDER, FUSE < CAPACITOR > C661 C662 C663 C664 C665 C666 1-101-005-00 1-101-005-00 1-101-005-00 1-101-005-00 1-101-005-00 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 22000PF 22000PF 22000PF 22000PF 22000PF 22000PF 50V 50V 50V 50V 50V 50V
20% 20% 20% 20% 20% 5% 20% 5% 5% 20% 20% 20% 20%
1-101-005-00 CERAMIC < CONNECTOR >

* CN606 * CN607

1-793-897-11 CONNECTOR (BASE, TOP) 2P 1-793-897-11 CONNECTOR (BASE, TOP) 2P
1-124-903-11 ELECT 1-126-963-11 ELECT 1-126-963-11 ELECT
Ref. No. C616 C617 C618 C619 C620 C621 C623 C626 C627 C633 C640 C641 C668 C669 C697 C698 C699 CA602 Part No. Description 22uF 1uF 1000uF 0.47uF 10uF 0.47uF 1uF 0.1uF 470uF 100uF 220uF 220uF 4700uF 4700uF 1uF 1uF 1uF 33PF 20% 20% 20% 20% 20% 20% 20% Remark 50V 50V 35V 50V 50V 50V 50V 100V 25V 16V 25V 25V 35V 35V 50V 50V 50V 50V Ref. No. R609 R610 R611 R612 R613 R614 R615 R616 R617 R618 R619 R620 R621 R622 R623 R625 R626 ! R627 R628 R630 R631 R632 R633 R634 R636 R637 R638 R640 R641 R642 R645 R646 R647 R650 R651 R652 R653 Part No. Description 15K 100K 470 10K 2.2K 10K 10K 4.7K 470K 470K 470K 4.7K 47K 470K 2.2K 2.2K 10K 10 1.5K 2.2K 330 2.2K 3.3K 470 4.7K 1.2K 1M 1K 27K 100K 22K 18K 22K 1K 1K 1-126-233-11 ELECT 1-124-903-11 ELECT 1-126-972-11 1-124-902-00 1-124-907-11 1-124-902-00 1-124-903-11 1-137-399-11 1-124-480-11 1-104-665-11 1-104-666-11 1-104-666-11 1-119-938-11 1-119-938-11 1-136-177-00 1-136-177-00 1-136-177-00 ELECT ELECT ELECT ELECT ELECT MYLAR ELECT ELECT ELECT ELECT ELECT ELECT MYLAR MYLAR MYLAR 1-249-431-11 CARBON 1-247-879-11 CARBON 1-249-413-11 1-247-855-11 1-247-839-11 1-247-855-11 1-247-855-11 1-247-847-11 1-247-895-00 1-247-895-00 1-247-895-00 1-247-847-11 1-247-871-11 1-247-895-00 1-247-839-11 1-247-839-11 1-247-855-11 1-212-857-00 1-247-835-11 1-247-839-11 1-249-411-11 1-247-839-11 1-247-843-11 1-249-413-11 1-247-847-11 1-249-418-11 1-247-903-00 1-249-417-11 1-249-434-11 1-247-879-11 1-247-863-11 1-249-432-11 1-247-863-11 1-249-409-11 1-249-409-11 1-249-417-11 1-249-417-11 CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON FUSIBLE CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON

 

Tags

F-150 Tankor Trucker FX600 Network Kxtg6583 XV-DV535 Vega2 XH-A1 Dvdr3570H 58 TC7114 Icemaker Laguna EW-7318USG CDX-C4840R TS0GSJ35u-EU DI2510 2003-90 Ideacentre B310 Ideacentre B305 MZ-G750 RX-V2092 Nuvi 270 Skoda Yeti Server Ktris245FBW F-204RDS 195499 Multifonctions FW830C Incident Prima 111 Platinum RT-52SZ30RB Oregon 450T MP 3010 STR-DE695 JX40 Jx50 CTK-496 DS14DFL Hw6515 DAC-10 114 EQ 42PC3DV-UD SR8000 LWT-32000C HD7812 NV-GS11 Terminal PC Review HR-S7700 AL1731 UE-40C6530 IC-AT100 - 09 MCM239D Stylistic 3500 SRP-350 XM-1502SX VF-16 HD4407 LTV-27W7 HD HS 8565 DCR412BLS 400 SUB Ferrari 1000 441360 DV2C6bew XAA Xr-20 HBH-PV705 WR 300 CE340NF Cyber 9 MIM 2330 CDX-2700 Bonne Paye GR-313SSF TL-WR941N RM4270L DVR-210 DVD-C450 190TW9FB Xv-n44 C 182 Back Plus Abit BW7 Ericsson T29 DPF 7901 LW22A13W 3720C ID 2 T280I DCR-HC21E Colibri 25 Colour Roland A-50 GL565 755DFX E845 S Asus SK8N Amarys 200

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101