LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Sony RHT-G 550 (RHTG550.CEL)

Price details:

Price excl. VAT: 555.74 Eco fees: 0.33 VAT 21 %: 116.77
PDF generated on: 10 June, 2011

Product details:

Product code: RHTG550.CEL EAN: 4905524551259 Manufacturer: Sony

672.84

* VAT included / Main specifications:
Product is discontinued. You can not order it anymore.
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.

Surround Function

Enjoying the surround effect.29

BRAVIA Sync Features

What is BRAVIA Sync?.32 Preparing for the BRAVIA Sync.32 Enjoying Blu-ray Disc/DVD.34 (One-Touch Play) Enjoying the TV sound from the stand..35 (System Audio Control) Turning off the stand, TV and the connected components.36 (System Power Off) Using the power saving function.36
Do not lean on or hang from the TV when the TV is placed on the stand.
The TV may fall from the stand causing an accident resulting in serious injury or death.
Do not allow children to climb on the stand or crawl between the shelves.
If children climb on the stand or get between the shelves, serious injury or death can result if the stand topples over.
Do not hold the base when moving the stand.
When you move Top shelf the stand, hold the lower part of the top shelf. If you hold the base as in the illustration, there is a risk that the plinth section may detach and the stand may fall.
Do not move the stand with the TV or other equipment installed on it.
Be sure to remove the TV and other equipment when moving the stand. If you fail to do so, the stand may lose balance and topple over resulting in serious injury.
Do not allow the AC power cord (mains lead) or the connecting cable to be pinched between the TV and the stand.
The AC power cord (mains lead) or the connecting cable may be damaged resulting in fire or electric shock. When moving the stand, be careful not to trap the AC power cord (mains lead) or the connecting cable under the stand.

CAUTION

Do not place any heated objects such as a hot pan or a kettle on the stand.
It may cause damage to the stand.

Notes on installation

Be careful not to pinch your hand or fingers between the TV and the stand. To prevent the stand from distorting, observe the following: Install the stand on a solid and flat surface. If you install the stand on a soft surface such as a mat, first lay a board under the stand. Do not install the stand in a place subject to direct sunlight or near a heater. Do not install the stand in a hot or humid place, or outdoors. Moving the stand requires two people or more. Move the stand only after removing the TV and the connected components. If you fail to do so, the TV may fall from the stand resulting in serious injury. When you move the stand, hold the lower part of the top shelf. Be careful not to pinch your fingers when moving the stand.
Do not step on the stand.
You may fall and cause injury.
This stand is only for the specified TV.
Confirm whether this stand is mentioned as a supported product in the operating instructions of the TV.

COAXIAL

ANTENNA

Rear of the stand

Tighten the cable tie by pulling its end.

To unbind the cable tie

Push the lever of the cable tie. While pushing the lever, pull the cable tie from the slit.
To remove the cable tie from the rear of the stand
Pinch the two tabs of the cable tie. While pinching the tabs, pull off the cable tie.
Connecting components with HDMI jacks
We recommend that you connect components to the stand using an HDMI cable. With HDMI, you can easily enjoy both high quality sound and high quality images. However, you cannot enjoy the TVs sound from the stand only with HDMI connection; it is necessary to connect the audio output of the TV to the audio input of the stand using an optical cable (or an audio cord*) in order to listen to the TVs sound from the stand. By connecting Sony BRAVIA Synccompatible components using HDMI cables, BRAVIA Sync Features makes operations simpler (page 32). Connect the AC power cord (mains lead) after you have finished connecting all components to the stand.
TV monitor, projector, etc. Audio signal Audio/video signal

Audio/video signal

Satellite tuner, cable television tuner, etc.
DVD player (recorder), etc.
Blu-ray Disc player (recorder), PlayStation 3, etc.
: Signal flow A HDMI cable (not supplied) B Optical cable (supplied) * An audio cord (not supplied) can be used when the TV does not have DIGITAL OPTICAL OUTPUT.
When the Control for HDMI function of this stand is set to on, even if the stand is turned off (active standby mode), the HDMI signal will be sent from the connected component to the TV via the HDMI connection. You can enjoy image and sound of the component on the TV.
The HDMI jack has priority when you connect the component to the stand using INPUT OPT, INPUT COAX and HDMI together. The INPUT OPT jack has priority when you connect both the audio output of the TV to the INPUT OPT and INPUT ANALOG jack of the stand.
Notes on HDMI connections
Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p images may not be displayed properly. Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. Check the setup of the connected component if the image is poor or sound does not come out of a component connected via the HDMI cable. Audio signals (sampling frequency, bit length, etc.) sent from an HDMI jack may be suppressed by the connected component. Sound may be interrupted when the sampling frequency or the number of channels of audio output signals from the playback component is switched. When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output. In this case, check the specification of the connected component. We do not recommend using an HDMI-DVI conversion cable. When TV, FM, AM, or DMPORT is selected for the input source of the stand, video signals via the HDMI input jack (SAT/CATV, DVD, BD) that was selected last time are output from the HDMI TV OUT jack.

Enjoying other components
Enjoying Blu-ray Disc, DVD, PlayStation 2 or PlayStation 3
Turn on the TV. Turn on the Blu-ray Disc/DVD player (recorder), PlayStation 2 or PlayStation 3, and then turn the stand on. Press INPUT SELECTOR + or repeatedly until BD or DVD appears in the front panel display. Change the TV input.

Play back the disc.

Enjoying a satellite tuner or cable television tuner

Turn on the TV.

Even if you play back Dolby True HD, Dolby Digital Plus or DTS-HD with a connected component compatible with these sound formats, the stand accepts Dolby Digital or DTS. When you play back these high-quality sound formats, set the connected component to output the sound in multi channel PCM, if possible.
Turn the satellite/cable television tuner and stand on. Press INPUT SELECTOR + or repeatedly until SAT/CATV appears in the front panel display. Change the TV input.
Enjoying a connected component through DMPORT connection
Press INPUT SELECTOR + or repeatedly until DMPORT appears in the front panel display. Start playback of the connected component.
Adjust the volume by pressing VOLUME +/.
You can enjoy optimum sound quality from portable audio components in any sound field except for STANDARD, joining the effect of Portable Audio Enhancer.
When you connect the video output jack of the DIGITAL MEDIA PORT adapter to the video input jack of the TV, set CTRL: HDMI to OFF in the AMP menu of the stand (page 34). The images of a component connected to the DIGITAL MEDIA PORT adapter will not be played on the TV if CTRL: HDMI is set to ON. To enjoy the sound of a component without displaying the images when CTRL: HDMI is set to ON, turn off the TV first and then reset the power of the stand. If you turn on this stand first and then turn off the TV, all components connected to the TV will be turned off because of the Control for HDMI function.
A preset number appears in the front panel display.
Presetting radio stations
You can preset 20 FM stations and 10 AM stations. Before tuning, make sure to turn down the volume to minimum.
Press X/x to select the preset number you want.
Complete! appears in the front panel display, and the station is stored.

C, X, x, c,

TUNING +/
Press MENU. Repeat 2 to 8 to store other stations.

To change the preset number

Restart from step 3.

Press INPUT SELECTOR + or repeatedly until FM or AM appears in the front panel display. Press and hold TUNING + or until the auto scanning starts.
Scanning stops when the system tunes in a station. TUNED and ST (for stereo program) light up in the front panel display. MONO lights up for a monaural program.
Press MENU. Press X/x repeatedly until Memory? appears in the front panel display.

Listening to the radio

Preset radio stations in the stands memory first (see Presetting radio stations (page 25)).
For automatic tuning, press and hold TUNING + or. Automatic tuning stops when the stand tunes in a station. To stop automatic tuning manually, press TUNING + or.
If an FM program is noisy
If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.
INPUT SELECTOR +/ DISPLAY C, X, x, c,
Press MENU. Press X/x repeatedly until FM Mode? appears in the front panel display, then press or c. Press X/x to select MONO.
STEREO: Stereo reception. MONO: Monaural reception.

PRESET +/ TUNING +/

The setting is made.

Press MENU.

To improve reception, reorient the FM wire antenna (aerial) (supplied).
Press INPUT SELECTOR + or repeatedly until FM or AM appears in the front panel display.
The last received station is tuned in.
Press PRESET + or repeatedly to select the preset station.
Each time you press the button, the stand tunes in one preset station.

To turn off the radio

Press "/1 to turn off the stand. To change to another function, press INPUT SELECTOR + or.
To listen to non-preset radio stations
Use manual or automatic tuning in step 2. For manual tuning, press TUNING + or repeatedly.

Naming preset stations

You can enter a name for a preset station. These names (for example, XYZ) appear in the front panel display when a station is selected. Note that no more than one name can be entered for each preset station.
You can check the frequency in the front panel display by pressing DISPLAY repeatedly (page 28).
You cannot enter a name for preset station of the Radio Data System (RDS) (page 28).
Press PRESET + or repeatedly to select the preset station you want to create an index name for. Press MENU. Press X/x repeatedly until Name In? appears in the front panel display.

Create a name by using C/X/x/c.
Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name.
If you enter a wrong character
Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character.
Complete! appears in the front panel display, and the station name is stored.
Viewing the station name or frequency in the front panel display
When the stand is set to FM or AM, you can check the frequency using the front panel display.

Press DISPLAY.

Using the Radio Data System (RDS)
What is the Radio Data System?
The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. RDS is available only for FM stations*.
* Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
Each time you press DISPLAY, the station name and the frequency alternate in the front panel display.
The station name is displayed if you have entered a name for a preset station. The frequency in the front panel display switches to the station name after several seconds.

Receiving RDS broadcasts

Simply select a station from the FM band.
When you tune in a station that provides RDS services, the frequency in the front panel display switches to the station name*.
* If an RDS broadcast is not received, a station name will not appear in the front panel display.
RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak.
When a station name is displayed, you can check the frequency by pressing DISPLAY repeatedly.
Enjoying the surround effect
Selecting the sound field
This stand can create multi channel surround sound. You can select one of stands optimized preprogrammed sound fields.

SOUND FIELD +/

Press SOUND FIELD +/.
The present sound field appears in the front panel display.
Each time you press the SOUND FIELD +/ button, the display changes cyclically as follows: STANDARD y MOVIE y DRAMA y NEWS y SPORTS y GAME y MUSIC y JAZZ y CLASSIC y ROCK y POP y LIVE y FLAT y STANDARD.

Available sound fields

Suitable source Sound field Effect

All Video source

STANDARD MOVIE* DRAMA* NEWS* SPORTS* GAME* MUSIC*

Suits various sources. Recreates powerful and realistic sound, along with clear dialog. Best suited for TV dramas. Produces the announcers voice clearly. Produces the play-by-play commentary clearly and realistic sound with surround effects, such as cheering, etc. Produces powerful and realistic sound, best suited for playing video games. Best suited for music programs or music videos on Blu-ray Discs/ DVDs. Recreates the atmosphere of a jazz club. Recreates the atmosphere of a classical concert. Produces powerful sound, best suited for listening to rock music. Produces uplifting sound, best suited for listening to pop music. Recreates the atmosphere of a live performance. Plays all music in stereo without any effects.

Music source

JAZZ CLASSIC ROCK POP LIVE FLAT
* These sound fields are not available when DMPORT is selected by pressing INPUT SELECTOR.
You can set a different sound field for each input source. The sound field default setting for DMPORT is FLAT, and for other sources STANDARD. When DMPORT is selected by pressing INPUT SELECTOR, the center speaker produces no sound. Some speakers will not produce sound depending on the input signal, such as monaural programmes. The center speaker produces no sound in any sound field suitable for a music source. If you press the THEATRE button on a Sony TV remote when CTRL: HDMI is set to ON, the sound field changes to MOVIE (some Sony TVs excluded).
Enjoying the sound at low volume (NIGHT mode)
You can enjoy sound effects and to hear the dialog clearly even at a low volume level using this function. This function is useful for enjoying sound at night.

Press NIGHT.

To cancel the night mode, press NIGHT again.
You can listen to Dolby Digital sound at low volume by using AUDIO DRC (page 40).

What is BRAVIA Sync?

By connecting Sony components that are compatible with the BRAVIA Sync with an HDMI cable (not supplied), operation is simplified as below: One-Touch Play: When you play back a component such as a Blu-ray Disc/DVD player (recorder), the TV turns on automatically and switches to the appropriate HDMI input. System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers of the stand. System Power Off: When you turn off the TV, the stand and the connected components are also turned off simultaneously. BRAVIA Sync is compatible with a Sony TV, Blu-ray Disc/DVD player, AV amplifier, etc., with the Control for HDMI function. CONTROL FOR HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface).

Preparing for the BRAVIA Sync
To use the BRAVIA Sync, set the Control for HDMI function to on for the connected component. When you connect a Sony TV with the Control for HDMI function, the Control for HDMI function for the stand and the connected component can be set simultaneously by setting Control for HDMI function of the TV.

AMP MENU C, X, x, c,

The Control for HDMI function will not operate correctly in the following cases:
When you connect this stand to a component which does not correspond with the Control for HDMI function. When you connect the stand and components using other than HDMI connection. We recommend that you connect this stand to products featuring BRAVIA Sync.
Make sure that the stand is connected to the TV and the connected components (which should be compatible with the Control for HDMI function) using HDMI cables (not supplied). Turn on the stand, the TV and the connected components. Select the input of the stand connected to the component you want to watch (SAT/CATV, DVD, BD), and switch the HDMI input of the TV, so that an image from the connected component is displayed.
Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component.
Display the list of the HDMI components on the TV menu, and set the Control for HDMI function to on for connected components.
If you add or reconnect the component
Perform steps of Preparing for the BRAVIA Sync and If SCANNING or COMPLETE does not appear after performing the steps above again.
The Control for HDMI function for the stand and the connected component is simultaneously set to on. During the setting, SCANNING appears in the front panel display. After you finish the setting, COMPLETE appears in the front panel display. Wait until the setting is complete.
For details on setting the TV and the connected components, refer to their operating instructions.
If SCANNING or COMPLETE does not appear after performing the steps above
Set the Control for HDMI function to on for the stand and the connected component individually.
During the setting of the Control for HDMI function for the stand, the System Audio Control function does not work. If the Control for HDMI function for the connected component cannot be set simultaneously by setting CONTROL FOR HDMI of the TV, set the Control for HDMI function using the menu of the connected component. For details on setting the TV and the connected components, refer to their operating instructions.
The default setting of the Control for HDMI function of the stand is ON.
Press AMP MENU. Press X/x repeatedly until SET HDMI appears, then press or c. Press X/x repeatedly until CTRL: HDMI appears, then press or c. Press X/x to select ON. Press AMP MENU.

The AMP menu turns off. The Control for HDMI function is set to on.
Set the Control for HDMI function of the connected component to on.
For details on setting the connected component, refer to its operating instructions.
Select the input of the stand connected to the component you want to use the Control for HDMI function for (SAT/ CATV, DVD, BD), and repeat step 6.
Setting the Control for HDMI function to off
Set the Control for HDMI function to off when you connect components not compatible with the BRAVIA Sync, or that do not have HDMI jacks, etc.
Enjoying Blu-ray Disc/DVD

(One-Touch Play)

Play back a connected component.
The TV turns on automatically and switches to the appropriate HDMI input.
Even if the stand is turned off (active standby mode), the HDMI signal will be sent from the connected component to the TV via the HDMI connection. You can enjoy image and sound of the component on the TV.
Depending on the TV, the start of the content may not be output.
Press AMP MENU. Press X/x repeatedly until SET HDMI appears, then press or c. Press X/x to select CTRL: HDMI, then press or c. Press X/x to select OFF. Press AMP MENU.

The AMP menu turns off.

Enjoying the TV sound from the stand

(System Audio Control)

You can enjoy the TV sound from the speakers of the stand by means of a simple operation. For details, refer to the operating instructions of the TV.
Using the Volume Limit function
When the System Audio Control function is active, and the output method changes from the TV speaker to the stand speaker automatically, loud sound may be output depending on the volume level setting of the stand. You can prevent this by limiting the maximum volume level.
Press AMP MENU. Press X/x repeatedly until SET HDMI appears, then press or c. Press X/x repeatedly until VOL LIMIT appears, then press or c. Press X/x to select the maximum volume level you want.
The maximum volume level changes as follows: MAX y 49 y 48. 2 y 1 y MIN

Press AMP MENU.

This function is available only when the Control for HDMI function is set to on. This function is not available when the output method changes from the stand speaker to the TV speaker.
Press ?/1 to turn on the stand.
The sound is output from the speaker of the stand. The sound is output from the TVs speaker when you turn the stand off.
When the TV is turned on before this stand is turned on, the TV sound will not be output for a moment. When you connect a TV that does not have the System Audio Control function, the System Audio Control function does not work.
We recommend that you set the maximum volume level to a little lower than the volume you usually listen to. Regardless of the maximum volume level you set, the VOLUME +/ button of the stand and the remote is operable. If you do not want to limit the maximum volume level, select MAX.

You can adjust the volume and turn off the sound of the stand using the TV remote.
Turning off the stand, TV and the connected components

(System Power Off)

When you turn the TV off by using the POWER button on the TVs remote, the stand and the connected components turns off automatically.
Using the power saving function
If a BRAVIA Sync-compatible TV is connected to the stand, and the stand is in active standby mode, if the TV is turned off, HDMI signal transmission stops, and power consumption is reduced.
If the TV is turned off and enters standby mode, the power consumption of the stand will be reduced when the power saving function is on.
Depending on the status, the connected components may not be turned off. For details, refer to the operating instructions supplied with the connected components.
Press AMP MENU. Press X/x repeatedly until SET HDMI appears, then press or c. Press X/x to select POWER SAVE, then press or c. Press X/x to select the setting.
ON: Reduces power consumption in active standby mode. HDMI signal transmission occurs only when the TV is on. OFF: No reduction. HDMI signal transmission occurs continuously even if the stand is turned off (active standby mode).
The power saving function may not work for some TVs compatible with the BRAVIA Sync. In this case, set POWER SAVE to OFF. Depending on your components, it may take time before image or sound is output.
Press AMP MENU to turn off the AMP menu.
Settings and adjustments using the amplifier menu

Using the AMP menu

You can set the following items with AMP MENU on the remote. The default settings are underlined.
These settings are retained even if you disconnect the AC power cord (mains lead).
The following pages show details for each setting.
SET HDMI* CTRL: HDMI VOL LIMIT** POWER SAVE** DUAL MONO MAIN SUB MAIN/SUB ON OFF AUDIO DRC MAX STD OFF ON OFF OFF, 10M, 20M,. 80M, 90M ON OFF MAX, 49, 48,.. 2, 1, MIN ON OFF

A/V SYNC

* See BRAVIA Sync Features (page 32). ** This setting appears only when CTRL: HDMI is set to ON.
Press AMP MENU to turn on the AMP menu. Press C/X/x/c repeatedly to select the item and the setting.
Enjoying multiplex broadcast sound (DUAL MONO)
You can enjoy multiplex broadcast sound when the stand receives an AC-3 multiplex broadcast signal.
Adjusting the delay between the sound and the image (A/V SYNC)
You can delay the sound using this function when the image is slower than the sound.
To receive AC-3 signal, you need to connect a digital satellite tuner to the stand with an optical cable or coaxial cable, and set the digital output mode of the digital satellite tuner to AC-3.
INPUT SELECTOR RETURN CENTER SUBWOOFER PRESETAMP MENU NIGHT DIMMER PRESET+ MENU
Press AMP MENU. Press X/x repeatedly until DUAL MONO appears, then press or c. Press X/x to select the sound you want.

If PROTECTOR and PUSH POWER appears alternately in the front panel display.
Press VOLUME + and check the volume level. Press MUTING or VOLUME + to cancel the muting function. Press SOUND FIELD +/ and check the selected sound field. Depending on the source, the sound effect of the speakers may be less noticeable.
Sound lags behind the TV image.
Set A/V SYNC to OFF when A/V SYNC is set to ON.
Press ?/1 to turn off the stand, and check the following item after STANDBY disappears. Is anything blocking the ventilation holes of the stand? After checking the above item and fixing any problems, turn on the stand. If the cause of the problem cannot be found even after checking the above item, consult your nearest Sony dealer.
Dolby Digital or DTS multi-channel sound is not reproduced.

Connected components

There is no sound or only a very low-level sound no matter which component is selected.
Check that the playing Blu-ray Disc, DVD, etc., is recorded in Dolby Digital or DTS format. When connecting the Blu-ray Disc, DVD player, etc., to the digital input jacks of this stand, check that audio setting (settings for the audio output) of the connected component.
The surround effect cannot be obtained.
Check that this stand and components are connected correctly and securely. Check that both this stand and the selected component are turned on. Check that the volume is not set to the minimum level. Press MUTING to cancel the muting function.
There is no sound from the selected component.
Depending on the digital signal, the surround processing may not work (page 29). To check the input signal, press INPUT SELECTOR on the stand and select the input again. When the input is switched, the input signal type appears in the front panel display. If 2.0ch or 1.0ch appears, the sound source is stereo or monaural, and does not
Check that the component is connected correctly to the audio input jacks for that component. Check that the cords are fully inserted into the jacks on both the component and this stand. Check that the component is selected correctly.
Sound is interrupted or there is noise.
Check Formats supported by this stand (page 45).
No image appears on the TV.
Check that the TV and this stand are connected correctly and securely. Check that the TV is selected correctly. Set the TV to the appropriate input mode. Check the HDMI connection. Check that the cords are fully inserted into the jacks on both the component and this stand.
The sound is output from both the stand and the TV.
If the Control for HDMI function is set to off, or the selected component is not compatible with the Control for HDMI function, turn off the sound of the stand or the TV.
The System Power Off function does not work.

Control for HDMI

If you experience any of the following difficulties while using the BRAVIA Sync, use this troubleshooting guide to help you remedy the problem.

The Control for HDMI function does not work.
Change the setting of the TV to turn connected components off automatically when you turn off the TV. For details, refer to the operating instructions of the TV.
The stand is turned off when you turn off the TV.
Check the HDMI connection (page 13). Make sure CTRL: HDMI is set to ON in the AMP menu. Make sure the connected component is compatible with the Control for HDMI function. Check the Control for HDMI settings on the connected component. Refer to the operating instructions supplied of the connected component. If you change the HDMI connection, connect/disconnect the AC power cord (mains lead), or there is a power failure, repeat the procedures of BRAVIA Sync Features (page 32). If you connect/disconnect the AC power cord (mains lead), wait 15 seconds or more and then use this stand. The stand may not work correctly if you select a component that is not compatible with the Control for HDMI function on the TV side.
No sound is output from the stand and TV speaker.
When the Control for HDMI function is on, the System Power Off function is active, and the stand is turned off when you turn off the TV.
An image does not appear on the TV.
Check whether HDMI IN and HDMI OUT are connected in reverse.
When the stand is in standby mode, there is no image or sound on the TV.
When the stand is in standby mode, image and sound are output from the HDMI component selected the last time you turned off the stand. If you are enjoying another component, play the component and perform the One-Touch Play operation, or turn on the stand to select the HDMI component you want to enjoy. Make sure POWER SAVE is set to OFF in the AMP menu if you connect components not compatible with the BRAVIA Sync to the stand (page 36).
Check the volume of the stand and the TV. Select the input of the stand correctly. Check HDMI OUT on the connected components are connected correctly and securely.
The remote does not function.

Specifications

Point the remote at the remote sensor on the stand. Remove any obstacles in the path between the remote and the stand. Replace both batteries in the remote with new ones, if they are weak. Make sure you select the correct input on the remote.
The volume turns down when the output method changes from the TV speaker to the stand speaker.
The Volume Limit function is working. For details, see Using the Volume Limit function (page 35).
If the stand still does not operate properly after performing the above measures, reset the stand as follows:
Use buttons on the stand for the operation.
Press ?/1 to turn on the power. Press ?/1 while pressing INPUT SELECTOR and VOLUME.
COLD RESET appears and the stand is reset. AMP menu, sound field, etc., return to the default settings.

Dimensions: mm (approx.)

S-Force PRO Front Surround

S-Master

S-Master is an all-digital amplifier technology developed by Sony, which effectively minimizes the occurrence of sound fragmentation and jitter, delivering superb dialog clarity and faithful reproduction of the original sound. The compact amplifier section supports a higher power efficiency and improved thermal performance.

x.v.Colour

x.v.Colour (x.v.Color) enables the more faithful reproduction of various colors such as the brilliant colors of flowers and the turquoise blue of the southern ocean. x.v.Color is a promotion name given to the products that have the capability to realize a wide color space based on the xvYCC specifications and is a trademark of Sony Corporation. xvYCC is an international standard of the technical specifications of the extended-gamut color space for video signals. The color gamut of xvYCC is wider than the one of sRGB that is used with the current television system.
A/V SYNC 39 AMP menu 38 AUDIO DRC 40
Satellite tuner connecting 13, 15 Setting 9 S-Force PRO Front Surround 7 Sleep timer 41 Sound field 29
Blu-ray Disc player (recorder) connecting 13
DIGITAL MEDIA PORT connecting 17 DISPLAY 27, 40 DUAL MONO 39 DVD player (recorder) connecting 13, 15

NIGHT mode 31

PlayStation 3 connecting 13
Radio 26 Radio stations 25 Remote before use 8 operating 21
Sony Corporation Printed in Malaysia