Press the button of the component on the Commander that you want to operate. Point the Commander directly at the component. Press the button for the function you want to use. See Remote Button Descriptions for complete descriptions of the buttons on the Commander.

Control de un componente

Operao de um componente
Presione la tecla del telemando correspondiente al componente que desee controlar. Apunte con el telemando hacia el componente. Presione la tecla correspondiente a la funcin que desee utilizar. Con respecto a la descripcin completa de las teclas del telemando, consulte Descripcin de las teclas del telemando.
Carregue na tecla do componente no telecomando que deseja operar. Aponte o telecomando directamente ao componente. Carregue na tecla de funo que deseja utilizar. Consulte Descrio das teclas do telecomando quanto descrio completa das teclas no telecomando.
Remote Button Descriptions (ill. C)

Troubleshooting

If youre having problems setting up or using the Remote Commander:
When setting up the Commander, carefully go through the procedures described under Setting Up the Commander. If the code thats listed first for your component doesnt work, try all the codes listed for your component in the order in which theyre listed. If all the codes fail to work (or if your component is not listed in this manual), try using the procedures under Searching for the Correct Code. Check that youre aiming the Commander directly at the component, and that there are no obstructions between the Commander and the component. Make sure the batteries youre using are not worn out, and that theyre inserted correctly. Check that the component has infrared remote capability. For example, if your component didnt come with a remote, it probably isnt capable of being controlled by a Remote Commander.

Operating a TV (a)

1 To use for operating a Sleep function on TV (works only for TV with a Sleep function). 2 To change the input mode. 3 To change the channel. For example, to go to channel 5, press 0 and 5 (or, press 5 and ENT). You can also change the channel with CH +/. 4 To display the current channel on TV. 5 To work as the JUMP, FLASHBACK or CHANNEL RETURN button, depending on the TVs manufacturer. 6 channel up: + channel down: 7 To turn on and off a TV. 8 To change channels using with buttons. For example, to go to channel 5, press 5 and ENT. You can also change the channel with CH +/. 9 volume up: + volume down: ! To mute volume on TV. Press again to turn muting off. ! To operate a TV.