COLOR MONITOR SERVICE MANUAL
CHASSIS NO. : CL-42 FACTORY MODEL: LHS74P, LHS74PM
MODEL: SDM-HS74, SDM-HS74P

CAUTION

BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CONTENTS

SPECIFICATIONS... 2 PRECAUTIONS.. 3 TIMING CHART...4 OPERATING INSTRUCTIONS.. 5 WIRING DIAGRAM.. 6 BLOCK DIAGRAM... 7 DESCRIPTION OF BLOCK DIAGRAM.8 ADJUSTMENT.. 10 TROUBLESHOOTING GUIDE.. 11 EXPLODED VIEW...17 REPLACEMENT PARTS LIST.19 SCHEMATIC DIAGRAM... 22

SPECIFICATIONS

1. LCD CHARACTERISTICS Type : TFT Color LCD Module Active Display Area : 17 inch(337.92(H) x 270.336(V)) Size : 358.5(W) x 296.5(H) x 17.0(D) Pixel Pitch : 0.264 (Per one triad) x 0.264 Color Depth : 16.2M Colors Electrical Interface : LVDS Operating Mode : Normally White Backlight Unit : 4-CCFL (Cold Cathode Fluorescent Lamp) 2. OPTICAL CHARACTERISTICS 2-1. Viewing Angle by Contrast Ratio 10 Left : -60 min., -70(Typ) Right : +60 min., +70(Typ) Top :+60 min., +70(Typ) Bottom : -60min., -70(Typ) 2-2. Luminance 2-3. Contrast Ratio : 75(min), 80(Typ) : 250(min), 450(Typ) 5. POWER SUPPLY 5-1. Power : AC 100~240V, 50/60Hz , 1.0A 5-2. Power Consumption
MODE POWER ON (NORMAL) STAND-BY SUSPEND DPMS OFF POWER S/W OFF H/V SYNC VIDEO POWER CONSUMPTION LED COLOR ON/ON OFF/ON ON/OFF OFF/OFF ACTIVE OFF OFF OFF -
less than 45 W less than 1 W less than 1 W less than 1 W less than 1 W
GREEN AMBER AMBER AMBER OFF
6. ENVIRONMENT 6-1. Operating Temperature: 5C~35C (41F~95F) (Ambient) 6-2. Relative Humidity : 10%~80% (Non-condensing) 6-3. MTBF : 50,000 Hours(Typ) 30,000 Hours(Min) 7. DIMENSIONS (with TILT/SWIVEL) Width Depth Height : 367 mm (14.49'') : 215 mm (8.46'') : 410 mm (16.14'')
3. SIGNAL (Refer to the Timing Chart) 3-1. Sync Signal Type : Separate Sync 3-2. Video Input Signal 1) Type 2) Voltage Level a) Color 0, 0 b) Color 7, 0 c) Color 15, 0 3) Input Impedance
: R, G, B Analog : 0~0.70 V( 5%) : 0 Vp-p : 0.35 Vp-p : 0.7 Vp-p : 75
8. WEIGHT (with TILT/SWIVEL) Net. Weight Gross Weight : 5.7 kg (12.57 lbs) : 8.3 kg (18.30 lbs)
3-3. Operating Frequency Horizontal : 28 ~ 80kHz Vertical : 48 ~ 75Hz 4. Max. Resolution Analog Digital
: 1280 x 1024 / 75Hz : 1280 x 1024 / 60Hz
Signal Connector Pin Assignment
DVI-D Connector Pin 15 Signal (DVI-D)
T. M. D. S. Data2T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. D. S. Data3T. M. D. S. Data3+ +5V Power Ground (return for +5V,

H. Sync. and V. Sync.)

Pin 24

Signal (DVI-D)

Hot Plug Detect T. M. D. S. Data0T. M. D. S. Data0+ T. M. D. S. Data0/5 Shield T. M. D. S. Data5T. M. D. S. Data5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. Clock-
T. M. D. S. (Transition Minimized Differential Signaling)

PRECAUTION

WARNING FOR THE SAFETY-RELATED COMPONENT. There are some special components used in LCD monitor that are important for safety. These parts are marked on the schematic diagram and the replacement parts list. It is essential that these critical parts should be replaced with the manufacturers specified parts to prevent electric shock, fire or other hazard. Do not modify original design without obtaining written permission from manufacturer or you will void the original parts and labor guarantee.

WARNING

BE CAREFUL ELECTRIC SHOCK ! If you want to replace with the new backlight (CCFL) or inverter circuit, must disconnect the AC adapter because high voltage appears at inverter circuit about 650Vrms. Handle with care wires or connectors of the inverter circuit. If the wires are pressed cause short and may burn or take fire.
TAKE CARE DURING HANDLING THE LCD MODULE WITH BACKLIGHT UNIT. Must mount the module using mounting holes arranged in four corners. Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel. Protect the module from the ESD as it may damage the electronic circuit (C-MOS). Make certain that treatment persons body are grounded through wrist band. Do not leave the module in high temperature and in areas of high humidity for a long time. The module not be exposed to the direct sunlight. Avoid contact with water as it may a short circuit within the module. If the surface of panel become dirty, please wipe it off with a softmaterial. (Cleaning with a dirty or rough cloth may damage the panel.)

Please use only a plastic screwdriver to protect yourself from shock hazard during service operation.

TIMING CHART

<< Dot Clock (MHz), Horizontal Frequency (kHz), Vertical Frequency (Hz), Horizontal etc. (s), Vertical etc. (ms) >> Mode
H/V Sort Sync Polarity Dot Clock Frequency Total Period Video Active Time Front Porch Sync Duration (E) (A) (C) (D) Back Porch (F) Blanking time (B) Resolution
H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V H V
+ ++ + + + + + + + + + + + + + + + + + +
28.350 25.175 30.240 31.500 31.505 36.000 40.000 50.000 49.500 57.285 65.000 75.000 78.750 80.000 108.000 100.000 92.940 105.590 46.200 108.000 108.000 135.000
31.500 70.156Hz 31.469 59.940Hz 35.00 66.667Hz 37.50 75.0Hz 35.162 59.901Hz 35.156 56.250Hz 37.879 60.317Hz 48.077 72.188Hz 46.875 75.0Hz 49.727 74.553Hz 48.363 60.004Hz 56.476 70.069Hz 60.023 75.029Hz 60.241 74.927Hz 67.500 75.000Hz 68.681 75.062Hz 61.795 65.950Hz 71.732 76.068Hz 31.216 50.026Hz 60.000 60.000Hz 63.981 60.020Hz 79.976 75.025Hz

1688 1066

1280 1024

248 38

408 42
720x400 70Hz 640x480 60Hz 640x480 65Hz 640x480 75Hz 720x480 60Hz 800x600 56Hz 800x600 60Hz 800x600 72Hz 800x600 75Hz 832x624

(MAC16)

75Hz 1024x768 60Hz 1024x768 70Hz 1024x768 75Hz 1024x768

(MAC19)

75Hz 1152x864 75Hz 1152x870

(MAC21)

75Hz 1152x900 66Hz 1152x900 75Hz 1170x584 50Hz 1280x960 60Hz 1280x1024 60Hz 1280x1024 75Hz

E D B A

OPERATING INSTRUCTIONS

FRONT / REAR VIEW

1. (Power) switch and indicator To turn the display on or off, press the (power) switch upward. The power indicator lights up in green when the display is turned on, and lights up in orange when the monitor is in power saving mode.
2. MENU button This button displays or closes the main menu. 3. buttons These buttons function as the buttons when selecting the menu items and making adjustments.
4. OK button This button selects the item or executes the settings in the menu. 5. button This button is used to change the brightness of the screen.

6. AC IN connector Connect the power cord (supplied). 7. DVI-D input connector (digital RGB) This connector inputs digital RGB video signals that comply with DVI Rev.1.0. 8. HD15 (RGB) input connector (analog RGB) This connector inputs analog RGB video signals (0.7 Vp-p, positive) and SYNC signals. DDC (Display Data Channel) is a standard of VESA.

WIRING DIAGRAM

Connector Assy P/N: 6631T11016W Connector Assy P/N: 6631T20023L

3.3V 2.5V

EEPROM*1 (EDID)

MST9131B

D-Sub X1
ADC OSD DVI Rx Pre-Amp PLL

EEPROM (System)

Scaling

LVDS Tx

DVI(TMDS)

EEPROM (EDID) 3.3V

Regulator

BLOCK DIAGRAM

5V 12V

Filter

Inverter Output (4Lamp)

LAMP Connector

MTV412PLCC
DESCRIPTION OF BLOCK DIAGRAM
1. Video Controller Part & Display Data Transmitter Part. This part amplifies the level of video signal for the digital conversion and converts from the analog video signal to the digital video signal using a pixel clock. The pixel clock for each mode is generated by the PLL. The range of the pixel clock is from 25MHz to 135MHz. This part consists of the Scaler, LVDS Tx, TMDS Rx, Reset IC. The Scaler gets the video signals which were converted analog to digital, interpolates input to 1280 x 1024 resolution signal and outputs 8-bit R, G, B signal to transmitter. Especially pre-amp / ADC / Video controller/ Transmitter are merged to one chip MST9131A by MST. This part transmit digital signal from the Scaler to the receiver of module. 2. Power Part This part consists of the one 3.3V and one 2.5 regulators to convert power which is provided 5V by LIPS Board. In particular, 5V is provided for LCD Panel. There is also 12V which is for Audio power. Also, 5V is converted 3.3V and 2.5V by regulator. Converted power is provided for IC in the main board. 3. System Controller (Microprocessor) Circuit 1) Microprocessor (U501) distinguishes polarity and frequency by calculating horizontal and vertical sync input from signal source. 2) Microprocessor (U501) carries out power control by sending power-down trigger signal to each IC. 3) Microprocessor (U501) communicates with EEPROM (704), and MST9131A (U201) through IIC or 8 bit bus line. It is enable to control and communicate each devices. 4) Microprocessor (U501) let User adjust screen by OSD function.

LIPS Board Block Diagram

50 ~ 60Hz HVDC 100KHz

EMI COMPONENTS

INPUT RECTIFIER AND FILTER

ENERGY TRANSFER

OUTPUT RECTIFIER AND FILTER

5V GND

LINE 100 ~ 240V

PWM CONTROL CIRCUIT

PHOTOCOUPLER ISOLATION

SIGNAL COLLECTI ON

PRIMARY

SECONDARY

Operation description_LIPS
1. EMI components. This part contains of EMI components to comply with global marketing EMI standards like FCC, VCCI CISPR, the circuit included a line-filter, across line capacitor and of course the primary protection fuse. 2. Input rectifier and filter. This part function is for transfer the input AC voltage to a DC voltage through a bridge rectifier and a bulk capacitor. 3. Energy Transfer. This part function is transfer the primary energy to secondary through a power transformer. 4. Output rectifier and filter. This part function is to make a pulse width modulation control and to provide the driver signal to power switch, to adjust the duty cycle during different AC input and output loading condition to achive the dc output stablize, and also the over power protection is also monitor by this part. 5. Photo-Coupler isolation. This part function is to feed back the dc output changing status through a photo transistor to primary controller to achieve the stabilized dc output voltage. 6. Signal collection. This part function is to collect the any change from the dc output and feed back to the primary through photo transistor.

- 10 -

ADJUSTMENT
Windows EDID V1.0 User Manual Operating System: MS Windows 98, 2000, XP Port Setup: Windows 98 => Doesnt need setup Windows 2000, XP => Need to Port Setup. This program is available for LCD Monitor only. 1. Port Setup a) Copy UserPort.sys file to c:\WINNT\system32\drivers folder b) Run Userport.exe 2. EDID Read & Write 1) Run WinEDID.exe
2) Edit Week of Manufacture, Year of Manufacture, Serial Number a) Input User Info Data b) Click Update button c) Click Write button
c) Remove all default number d) Add 300-3FF
e) Click Start button. f) Click Exit button.

- 11 -

SERVICE OSD
1) Turn off the power switch button. 2) Press DOWN, POWER key. 3) Shows the service OSD menu. That menu is located in down side of main menu. 4) The service OSD menu contains additional menus as described below. a) COLOR TEMP : Adjust R/G/B color values of contrast and brightness in 9300K, 6500K, user color mode. b) INITIAL EEPROM : Initialize the EEPROM values(24C08). c) CLEAR ETI : Initialize the used time of monitor. d) AGING : Select aging mode.(On/Off) e) WHITE BALANCE AUTO : Allows you to set the R/G/B offset and gain value automatically. MANUAL : Allows you to set the R/G/B offset and gain value manually. f) DEFAULT TIMING : Select the resolution timing of the signal. Sub menus are 1152x864(VESA standard timing) and 1152x870(MAC computer timing). g) MODULE : Select the LCD module attached to this monitor.

Video Signal Generator IBM Compatible PC

PARALLEL PORT

RS 23 2C

Control Line

Power inlet (required)
5V ON 4.7K 4.7K 4.7K 74LS06 74LS06

S MO NI

Power Select Switch (110V/220V) Power LED

E ST Switch

F V-Sync On/Off Switch (Switch must be ON.)
Figure 1. Cable Connection

- 12 -

TROUBLESHOOTING GUIDE

1. NO POWER

NO POWER (POWER INDICATOR OFF)
CHECK J705 VOLTAGE PIN 5, 6, 8(5V) PIN 1, 2(12V)? YES
CHECK POWER BOARD, AND FIND OUT A SHORT POINT AS OPENING EACH POWER LINE
CHECK U501 PIN 8 Voltage (5V) ? YES
CHECK 5VS LINE (OPEN CHECK) NO PROBLEM
CHECK KEY CONTROL CONNECTOR ROUTINE
IS U201 PIN94 (3.3V), PIN85(2.5V) VOLTAGE REPEATED AS PULSE SHAPE ? YES
CHECK IIC LINE CONNECTION (U501, U502)
CHECK U201 VCC, X501 XTAL CHECK

- 13 -

2. NO RASTER
NO RASTER (OSD IS NOT DISPLAYED)
CHECK J705 PIN 5, 6, 8(5V) PIN 1, 2(12V)? YES

CHECK LIPS

CHECK J705 PIN 9 5V? YES
CHECK MICOM INV ON/OFF PORT.
CHECK J705 PIN 10 5V? YES
1. CONFIRM BRIGHTNESS OSD CONTRL STATE. 2. CHECK MICOM DIM-ADJ PORT
CHECK PULSE AS CONTACTING SCOPE PROBE TO CAUTION LABEL. (CONTACT PROBE TO CAUTION LABEL. CAN YOU SEE PULSE AT YOUR SCOPE?
REPLACE CCFL LAMP IN THE LCD MODULE

- 14 -

3. NO RASTER (OSD IS NOT DISPLAYED) MST9131B
U201 POWER PIN 72, 82, 94(3.3V) PIN 64, 85 (2.5V)? YES U501 PIN11, 12 OSCILLATE AS 12MHZ?
CHECK U803 (2.5V REGULATOR), CHECK U804 (3.3V REGULATOR)
1. CHECK PIN11, 12 SOLDERING CONDITION 2. CHECK X501 3. TROUBLE IN U501
U501 PIN41 IS 48KHz H-SYNC? PIN42 IS 60Hz V-SYNC? IS PULSE APPEARED AT SIGNAL PINS? AT MODE 12?
CHECK CONNECTION LINE FROM D-SUB TO U501
YES TROUBLE IN CABLE OR LCD MODULE

- 15 -

4. TROUBLE IN DPM

TROUBLE IN DPM

CHECK R734, R741 (INPUT-1)SYNC. R732, R755 (INPUT-2)SYNC.
CHECK PC PC IS NOT GOING INTO DPM OFF MODE

CHECK U501 PIN 24 (0V) ?

TROUBLE IN SIGNAL CABLE

TROUBLE IN PC

- 16 -

EXPLODED VIEW

GENESS

13 4-2

EXPLODED VIEW PARTS LIST

Ref. No. Part No.

3091TKL061K 1 3091TKL061L 3091TKL061N 3091TKL061M 6304FCI005B 2 6304FAU012A 6304FAU010B 3 3809TKL085C 3809TKL085B 4-1 3043TKK109A 3043TKK109C 4-3043TKK115B 3043TKK115C 6871TST540B 4951TKS165B 6 4951TKS165A 4951TKS165D 7 4950TKK583A 4950TKK487A 10 3550TKK301B 3550TKK301G 6631T11016W 6871TPT285C 6871TPT285A 3313TL7047B 11 3313TL7047A 3313TL7047E 12 4815TKK040A 3550TKK302L 3550TKK302M 13 - 3550TKK302P 3550TKK302N 3550TKK302Q 16 3846TKK058B 3846TKK062B 6620K00002G 6631T20023L

Description

CABINET ASSEMBLY, HS94 SONY 3090TKL061A BLUE - Europe, U.S.A/CANADA-SDM-HS74 CABINET ASSEMBLY, HS74 SONY 3090TKL061A BLACK - U.S.A/CANADA-SDM-HS74, SDM-HS74P CABINET ASSEMBLY, HS74P SONY 3090TKL061A BLACK SPRAY - Europe, Japan - SDM-HS74P CABINET ASSEMBLY, HS74P SONY 3090TKL061A SILVER SPRAY - Europe, Japan,U.S.A/CANADA-SDM-HS74P LCD(LIQUID CRYSTAL DISPLAY), M170E5-L05 CHIMEI TFT COLOR 300NITS 16MS TCO-03 TN SXGA - Europe-SDM-HS74 LCD(LIQUID CRYSTAL DISPLAY), M170EN05V5 AU TFT COLOR SXGA 250NIT GEN5-Europe, U.S.A/CANADA-SDM-HS74 LCD(LIQUID CRYSTAL DISPLAY), M170EN06-V2(AR COATING), AU TFT COLOR LVDS SXGA 16MS - SDM-HS74P BACK COVER ASSEMBLY, HS74 3808TKL084A BLACK-SDM-HS74P, U.S.A/CANADA-SDM-HS74 BACK COVER ASSEMBLY, HS74 3808TKL084A DARK BLUE -SDM-HS74 TILT SWIVEL ASSEMBLY, SONY_HS17. - SDM-HS74 TILT SWIVEL ASSEMBLY, SONY HS74P.- SDM-HS74P TILT SWIVEL ASSEMBLY, HS74 3550TKK304C _NT - SDM-HS74 TILT SWIVEL ASSEMBLY, HS74P 3550TKK304C.- SDM-HS74P PWB(PCB) ASSEMBLY,SUB, LHS74/94(P)M CONTROL TOTAL SONY CL-55 METAL ASSEMBLY, FRAME HS74 CMO_L05 - SDM-HS74 METAL ASSEMBLY, FRAME HS74 AUO_V5 - SDM-HS74 METAL ASSEMBLY, FRAME HS74 AUO EN06 V2 - SDM-HS74P METAL, FIX CONNECTOR CMO 17 OX73 METAL, FIX CONNECTOR-AU SIDE LS71K COVER, LHS73K PIECE BACK DARK BLUE - SDM-HS74 COVER, LHS73K PIECE BACK BLACK - SDM-HS74(USA/CANADA), SDM-HS74P CONNECTOR ASSEMBLY, 30P-30P H-H 200MM UL20276 AWG30 LOX73L/LOX93L PWB(PCB) ASSEMBLY,POWER, HS74 CMO, HS94 LPL/AUO POWER TOTAL POWERNET PWB(PCB) ASSEMBLY,POWER, HS74 AUO 2X4PIN POWER TOTAL POWERNET MAIN TOTAL ASSEMBLY, LHS74M - AGRDR SONY CL-43 - SDM-HS74 , CMO MAIN TOTAL ASSEMBLY, LHS74/94PM _ AUO SONY CL-42 - SDM-HS74 MAIN TOTAL ASSEMBLY, LHS74PM AURDR SONY CL-42 - SDM-HS74P, AUO SHIELD ASSEMBLY, REAR HS74 COVER, HS74 BACK DECO BLUE- SDM-HS74 COVER, HS74 BACK DECO BLACK- U.S.A/CANADA-SDM-HS74 COVER, HS74P BACK DECO BLACK SPRAY - Europe, Japan-SDM-HS74P COVER, HS74P BACK DECO SILVER SPRAY- Europe, Japan, U.S.A/CANADA-SDM-HS74P COVER, HS74P BACK DECO BLACK- U.S.A/CANADA-SDM-HS74P MARK, PIECE BADGE(AL),SONY-HS73-BK(3-704-176-51) MARK, PIECE BADGE SONY NO6.0(AL) 4-095-995-21 GREY SOCKET(CIRC),POWER, HUAJIE,SA-4S-008-2-AA(180MM),JST,17" SONY AC UNIVERSAL NOPIN BLACK CONNECTOR ASSEMBLY, 11P-11P H-H 160MM UL1061 AWG26 TWI LOS93L (JST HOUSING)

- 18 -

REPLACEMENT PARTS LIST
CAUTION: BEFORE REPLACING ANY OF THESE COMPONENTS, READ CAREFULLY THE SAFETY PRECAUTIONS IN THIS MANUAL. * NOTE : S SAFETY Mark AL ALTERNATIVE PARTS

*S *AL LOC. NO.

PART NO.
DATE: 2004. 06. 02. DESCRIPTION / SPECIFICATION
*S *AL LOC. NO. C733 C734 C735 C737 C738 C739 C740 C745 C746 C747 C760 C761 C762 C801 C802 C803 C804 C809 C810 C817 C818 C819 C820 C821 C822 C823 C828 C829 C831 C832
PART NO. 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CZZTAT005B 0CK104CK56A 0CK105CD56A 0CH3103K516 0CH3104K566 0CK105CD56A 0CC102CK41A 0CK105CD56A 0CC102CK41A 0CZZTAT005B 0CK104CK56A 0CK103CK51A 0CZZTAT005B 0CK103CK51A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CH3103K516 0CZZTAT005B 0CZZTAT005B
DATE: 2004. 06. 02. DESCRIPTION / SPECIFICATION 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 RJ4-16V101MX ELNA 16V 100UF 2 0.1UF 1608 50V 10% R/TP X7R 1UF 1608 10V 10% R/TP X7R 10000PF 50V 10% B(Y5P) 2012 R 0.1UF 50V 10% X7R 2012 R/TP 1UF 1608 10V 10% R/TP X7R 1000PF 1608 50V 5% R/TP NP0 1UF 1608 10V 10% R/TP X7R 1000PF 1608 50V 5% R/TP NP0 RJ4-16V101MX ELNA 16V 100UF 2 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y5 RJ4-16V101MX ELNA 16V 100UF 2 0.01UF 1608 50V 10% R/TP B(Y5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 10000PF 50V 10% B(Y5P) 2012 R RJ4-16V101MX ELNA 16V 100UF 2 RJ4-16V101MX ELNA 16V 100UF 2

MAIN BOARD CAPACITORS

C204 C205 C206 C207 C208 C209 C210 C211 C213 C214 C215 C216 C217 C218 C219 C220 C221 C222 C223 C224 C225 C226 C227 C230 C231 C232 C233 C240 C251 C500 C501 C502 C503 C504 C505 C506 C512 C513 C516 C703 C707 C708 C709 C710 C711 C712 C713 C714 C727 C730 C731 C732 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK104CK56A 0CH3104K566 0CH3104K566 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK104CK56A 0CK104CK56A 0CZZTAT006A 0CC101CK41A 0CC101CK41A 0CC330CK41A 0CC101CK41A 0CC101CK41A 0CC180CK41A 0CC100CK41A 0CH3104K566 0CK104CK56A 0CC680CK41A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK104CK56A 0CC101CK41A 0CC101CK41A 0CK105CD56A 0CC101CK41A 0CC680CK41A 0CK103CK51A 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R RV2-16V100MU-R ELNA 16V 10UF 100PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 33PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 18PF 1608 50V 5% R/TP NP0 10PF 1608 50V 5% R/TP NP0 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 68PF 1608 50V 5% R/TP NP0 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.01UF 1608 50V 10% R/TP B(Y5 0.1UF 1608 50V 10% R/TP X7R 100PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 1UF 1608 10V 10% R/TP X7R 100PF 1608 50V 5% R/TP NP0 68PF 1608 50V 5% R/TP NP0 0.01UF 1608 50V 10% R/TP B(Y5

DATE: 2004. 06. 02. DESCRIPTION / SPECIFICATION 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K 1/10W 5 D.R/TP 4.7K 1/10W 5 D.R/TP 10K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 3.3K OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 3.3K OHM 1/10 W 5% 1608 R/TP 4.7K 1/10W 5 D.R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 470 OHM 1/10 W 5% 1608 R/TP 470 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 10K OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 75 OHM 1/10 W 5% 1608 R/TP 75 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 75 OHM 1/10 W 5% 1608 R/TP 68 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 22 OHM 1/10 W 5% 1608 R/TP
U201 U502 U702 U703 U802 U803 U804 0IPRPM3011C 0IMMRSS040C 0IMMRSG036A 0IMMRSG036A 0TFVI80023A 0IPMGFA003E 0IPMGK2001B "MST9131B-LF MSTAR 128P,LQFP T" S524A60X51(SCT0) SAMSUNG ELEC "M24C02-WMN6T SGS-THOMSON 8P,S" "M24C02-WMN6T SGS-THOMSON 8P,S" VISHAY SI3865DV R/TP TSOP-FAN1086-1.5A FAIRCHILD SOT252 AIC1117A-33CYTR(BS33) AIC SOT

COILs & COREs

L801 L802 L803 6210TCE001S 6210TCE001S 6210TCE001S HU-1M2012-121 CERATECH 2012MM HU-1M2012-121 CERATECH 2012MM HU-1M2012-121 CERATECH 2012MM

TRANSISTOR

Q502 Q503 Q504 Q505 Q506 Q701 Q702 Q703 Q704 0TR390409AE 0IKE704200H 0TR390409AE 0TR390409AE 0TR390409AE 0TR390409AE 0TR390409AE 0TR390409AE 0TR390409AE FAIRCHILD KST3904(LGEMTF) TP KIA7042AP TO-92 TP 4.2 VOLT. FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP FAIRCHILD KST3904(LGEMTF) TP

RESISTORs

R201 R202 R203 R207 R208 R209 R210 R220 R240 R501 R502 R503 R504 R505 R507 0RJ0472D677 0RJ0472D677 0RJ0472D677 0RJ3900D677 0RJ0472D677 0RJ0472D677 0RJ0472D677 0RJ4701D677 0RJ3900D677 0RJ4701D677 0RJ4701D677 0RJ4701D677 0RJ4701D677 0RJ4701D677 0RJ4701DOHM 1/10 W 5% 1608 R/TP 47 OHM 1/10 W 5% 1608 R/TP 47 OHM 1/10 W 5% 1608 R/TP 390 OHM 1/10 W 5% 1608 R/TP 47 OHM 1/10 W 5% 1608 R/TP 47 OHM 1/10 W 5% 1608 R/TP 47 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 390 OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP

- 20 -

*S *AL LOC. NO. R729 R730 R731 R733 R734 R740 R741 R742 R744 R745 R747 R748 R749 R750 R751 R752 R763 R764 R765 R766 R772 R773 R774 R775 R776 R777 R783 R784 R785 R811 R812 R813 R814 R815 R816 R841 R842 R843 R844 R845 R847 R848 R849 R850 R851 R852 R853 R854 R855 R856 R859 R860 R861 R862 R863
PART NO. 0RJ0222D677 0RJ1000D677 0RJ4700D677 0RJ1001D677 0RJ4701D677 0RJ1001D677 0RJ4701D677 0RJ0000D677 0RJ4701D677 0RJ1001D677 0RJ4701D677 0RJ1001D677 0RJ1000D677 0RJ1001D677 0RJ1001D677 0RJ1001D677 0RJ4701D677 0RJ4701D677 0RJ0332D677 0RJ0332D677 0RJ0102D677 0RJ0102D677 0RJ0102D677 0RJ0102D677 0RJ0102D677 0RJ0102D677 0RH0472D622 0RH0472D622 0RJ1001D677 0RJ2202D677 0RJ2001D677 0RJ2202D677 0RJ5600D677 0RH0000D622 0RH0000D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0472D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622 0RH0332D622
DATE: 2004. 06. 02. DESCRIPTION / SPECIFICATION 22 OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 470 OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP "0 OHM 1/10 W 5% 1608 R/TP"- SDM-HS74, CMO 4.7K OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 100 OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 1K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 4.7K OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 33 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 10 OHM 1/10 W 5% 1608 R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 1K OHM 1/10 W 5% 1608 R/TP 22K OHM 1/10 W 5% 1608 R/TP 2K OHM 1/10 W 5% 1608 R/TP 22K OHM 1/10 W 5% 1608 R/TP 560 OHM 1/10 W 5% 1608 R/TP 0 1/10W P-TYPE TAPPING 0 1/10W P-TYPE TAPPING 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 47 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP 33 1/10W 5 D.R/TP