3-867-384-31(1)

Micro Satellite System

Operating Instructions Mode demploi
SA-VE705 SA-VE702 SS-V703

1999 Sony Corporation

WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

SA-VE705/ SA-VE702

Table of Contents
Hooking up the system.. 4 Positioning the speakers. 7 Listening to the sound (SA-VE705 and SA-VE702 only). 9 Adjusting the sound.. 10 Precautions.. 11 Troubleshooting.. 12 Specifications.. 12

About this manual

The instructions in this manual are for SA-VE705, SA-VE702, and SS-V703 Sony Micro Satellite Systems.
Differences between the systems
SA-VE705 The SA-VE705 is 5.1 channel speaker system consisting of two front speakers, two rear speakers, one center speaker, and one subwoofer. It supports Sony Digital Cinema Sound, Dolby* Pro Logic, and Dolby Digital, and is thus geared towards the enjoyment of movies. SA-VE702 Consisting of two front speakers and one subwoofer, the SA-VE702 is suited for the enjoyment of music. SS-V703 This system consists of two rear speakers and one center speaker. It can be combined with the SA-VE702 to produce a system that is equal to the SA-VE705.
* Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY, the double-D symbol ;, PRO LOGIC and Dolby Digital (AC-3) are trademarks of Dolby Laboratories Licensing Corporation.
Number of speakers in each system
Speaker Model name SA-VE705 SA-VE702 SS-V1 Front Rear Center Subwoofer
Note to customers who own only the SS-V703 (and not the SA-VE702)
To enjoy Dolby Digital, five speakers and one subwoofer must be provided. We recommend that the SS-V703 be used in combination with the SA-VE702 (sold separately). If you use another speaker system instead of the SA-VE702, that system should be as similar as possible in specifications and identical in size to the SS-V703.
Any difference in operation is clearly indicated in the text, for example, SA-VE705 only.

Hooking up the system

Connect the speaker system to the speaker output terminals of an amplifier. Make sure power to all components (included the subwoofer) is turned off before starting the hook-up. This manual explains three connection configurations (A, B, and C). See the configuration for your particular speaker system.
Hookup A (For the 5.1 channel)
This configuration is used when the amplifier is connected to a DVD player, LD player, VCR or other video devices.
Front (Right) Subwoofer Center* Front (Left)

LINE IN

WOOFER OUT

CENTER

Rear (Right)* * SS-V703 (when used in combination with the SA-VE702)

Rear (Left)*

Attach the satellite speakers (front, rear, and center speakers) to the supplied speaker stands for positioning. For details, see Positioning the front (and rear) speakers on page 7 and Positioning the center speaker (SA-VE705 and SS-V703 only) on page 8.
Terminal (jack) connections

loosen

tighten
Hookup B (For the 5.1 channel)
Try this configuration instead of Hookup A in the following situations: When there are no jacks on the amplifier for a subwoofer. When you want stronger bass sound from the subwoofer.
Front (Right) Center* Front (Left)

Subwoofer

e E E e

Amplifier

SPEAKER SPEAKER IN OUT

Terminal connections

continued
Hooking up the system (continued) Hookup C (For the 2.1 channel SA-VE702 only)
This configuration is used when the amplifier is connected to a CD player, MD deck, cassette deck, or other audio devices. For customers who have purchased the optional SS-V703, see Hookup A or Hookup B.
Front (Right) Front (Left)
Attach the front speakers to the supplied speaker stands for positioning. For details, see Positioning the front (and rear) speakers on page 7.
Make sure the plus (+) and the minus () terminals on the speakers are matched to the corresponding the plus (+) and the minus () terminals on the amplifier. Be sure to tighten the screws of the speaker terminals securely since loose screws may become a source of noise. Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short-circuit. Do not connect the subwoofer to the amplifiers CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital). No bass will output from the subwoofer if you do. For details regarding the connections on the amplifier side, refer to the manual that was provided with your amplifier.
It is convenient to remember that all striped wires are minus () in polarity and should be connected to the minus () speaker terminals.

Positioning the speakers

Location of each speaker
Center* Subwoofer Front (Left) Front (Right)
Movies are best enjoyed in a room that produces no echoes (as in one with surrounding curtains). Music (especially classical music) is best enjoyed in a room that produces some echo. Adjust the height of the front speakers so that it corresponds with the center of the TV screen, as illustrated below.
Positioning the front (and rear) speakers
Attach the front (and rear) speakers to supplied speaker stands and place them at their optimum locations. For details on the location of the front (and rear) speakers, see Location of each speaker on this page.

Rear* (Left)

Rear* (Right)
* SS-V703 (when used in combination with the SA-VE702)
Detach the plate from the stand.
Each speaker should face the listening position. Better surround effect will result if all speakers are set at the same distance from the listening position. Place the front speakers at a suitable distance to the left and right of the television. Place the subwoofer on either side of the television. Place the center speaker on the top-center of the TV set. The placement of rear speakers greatly depends on the configuration of the room. The rear speakers may be placed on both sides of the listening position A or behind the listening position B.
Pass the speaker cord into the hole on the back of the stand and out from the hole at the center of the stand.
Positioning the speakers (continued)
Positioning the center speaker
(SA-VE705 and SS-V703 only)
Attach the center speaker to the supplied speaker stand and place it on a top of the TV set. For optimum listening enjoyment, the speaker should face directly towards the listener. Adjust the angle of the speaker stand for that purpose.
Separate the speaker cord, then secure the cord to the speaker stand with the plate.
Connect the speaker cord to the speaker terminal.
The cord should be pressed into the groove in the stand.
Using the supplied hex wrench, two screws, and washers, secure the speaker to the stand.
Do not remove the supplied speaker grille from the speaker while attaching the speaker to the speaker stand. Do not touch or press tweeters cover on the center of the speaker.

Listening to the sound

(SA-VE705 and SA-VE702 only)
Operation panel on the subwoofer

LEVEL MODE

MOVIE MUSIC

ON/ STANDBY

ON/STANDBY indicator
First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing the program source.
Turn on the amplifier and select the program source. Press ! on the subwoofer.

The ON/STANDBY indicator on the subwoofer lights up green.
Adjust the angle of the speaker stand.
Loosen the two screws under the base to adjust the angle. Then tighten them again afterwards.

Play the program source.

Power turns on and off automatically Auto power on/off function
When the subwoofer is on (i.e, the ON/STANDBY indicator lights up green) and there is no signal input for a few minutes, the ON/STANDBY indicator changes to red and the subwoofer enters power saving mode. While in this mode a signal is input to the subwoofer, the subwoofer automatically turns on (auto power on/off function). To turn this feature off, slide the POWER SAVE switch on the rear panel to OFF. POWER SAVE

AUTO OFF

Screws
The optional speaker stands
For greater flexibility in the positioning of the speakers, use the optional WS-FV10 (floor stand), WS-TV10 (TV stand), or WS-WV10 (wall mount bracket) speaker stand (available only in certain countries).
If you turn down the volume level of the subwoofer too low, the auto power on/off function may activate, causing the subwoofer to enter power saving mode.

WS-FV10

WS-TV10

WS-WV10

Adjusting the sound
Slight adjustments to the system can enhance your sound enjoyment.
Setting your amplifier for Dolby Digital*
If your amplifier is connected internally or externally with a Dolby Digital processor, you should use the some setup menus in the amplifier to specify the parameters of your speaker system. See the table below for the proper settings. For details on the setting procedure, refer to the manual that was provided with your amplifier.
* To enjoy Dolby Digital, five speakers and one subwoofer must be provided.

Adjusting the subwoofer

When Hookup A is used (Speaker setup menu)
For Front speakers Center speaker Rear speakers Subwoofer Set to SMALL SMALL SMALL ON (or YES)
Set MODE according to the program source as follows:
Source DVD, LD, video cassette or other video source MD, CD, cassette tape or other audio source MODE MOVIE MUSIC

(Other setup menu)

Menu LFE* MIX BASS BOOST** Set to 10 dB ON
Rotate LEVEL to adjust the volume.
Set the volume level to suit the program source.
* Low Frequency Effect **A function that reinforces the bass sound
When Hookup B is used (Speaker setup menu)
For Front speakers Center speaker Rear speakers Subwoofer Set to LARGE SMALL SMALL OFF (or NO)
Some amplifier functions for enhancing the sound may cause distortion in the subwoofer. If such distortion occurs, turn off those functions. To enjoy high-quality sound, do not turn the subwoofer volume too high. To increase the bass sound from the subwoofer, connect the system using Hookup B (see page 5).

Menu LFE MIX BASS BOOST Set to 10 dB ON

Precautions

On safety
Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. (SA-VE705 and SA-VE702 only) Unplug the system from the wall outlet if it is not to be used for an extended period of time. To disconnect the cord, pull the cord by grasping the plug. Never pull the cord itself. (SA-VE705 and SA-VE702 only) Should any liquid or solid object fall into the system, unplug the systems power cord and have the system checked by qualified personnel before operating it any further. AC power cord must be changed only at the qualified service shop. (SA-VE705 and SA-VE702 only)
If you encounter color irregularity on a near by TV screen
This speaker system is magnetically shielded to allow it to be installed near a TV set. However, color irregularities may still be observed on certain types of TV sets.
If color irregularity is observed.
c Turn off the TV set once, then turn it on again after 15 to 30 minutes.
If color irregularity is observed again.
c Place the speakers further away from the TV set. c Keep magnets and other sources of magnetic fields away from the speaker system since they may cause color irregularities on your TV screen.

If howling occurs

Reposition the speakers or turn down the volume on the amplifier.

On placement

Do not place the speakers in an inclined position. Do not place the speakers in locations that are: Extremely hot or cold Dusty or dirty Very humid Subject to vibrations Subject to direct sunlight

On operation

Do not drive the speaker system with a continuous wattage exceeding the maximum input power of the system. If the polarity of the speaker connections are not correct, the bass tones will be weak and the position of the various instruments obscure. Contact between bare speaker wires at the speaker terminals may result in a short-circuit. Before connecting, turn off the amplifier to avoid damaging the speaker system.

On cleaning

Clean the speaker cabinets with a soft cloth lightly moistened with a mild detergent solution or water. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any questions or problems concerning your speaker system, please consult your nearest Sony dealer.

Troubleshooting

Should you encounter a problem with your speaker system, check the following list and take the indicated measures. If the problem persist, consult your nearest Sony dealer. There is no sound from the speaker system. Make sure all the connections have been correctly made. Make sure the volume on the amplifier has been turned up properly. Make sure the program source selector on the amplifier is set to the proper source. Check if headphones are connected. If they are, disconnect them. There is distortion in the subwoofer sound output. (SA-VE705 and SA-VE702 only) Check if any sound-enhancing functions have been activated on the amplifier. If they have, turn them off. There is hum or noise in the speaker output. Make sure all the connections have been correctly made. Make sure none of the audio components are positioned too close to the TV set. The sound has suddenly stopped. Make sure all the connections have been correctly made. Contact between bare speaker wires at the speaker terminals may cause a short-circuit.

Specifications

SS-MS7 (front, center, and rear speakers)
Speaker system Speaker units Tweeter: Woofer: 2 way, magnetically shielded 1.9 cm (3/4 in.), dome type 5 cm (2 in.) 2, balanced drive type Bass reflex 8 ohms
Enclosure type Rated impedance Power handling capacity Maximum input power: 140 W Sensitivity level 87 dB (1 W, 1 m) Frequency range 120 Hz - 40,000 Hz Dimensions (w/h/d) When attached speaker grilles: Approx. 130 mm (3 1/3/1/8 in.) each When attached to supplied speaker stand: Approx. 141 mm (3 7/1/5/8 in.) each, (Front (and rear) speakers) Approx. 144 mm (6 3/1/3/4 in.), (Center speaker: pointed upwards) Approx. 141 mm (6 3/3/5/8 in.), (Center speaker: pointed downwards) Mass When attached speaker grilles: Approx. 1.3 kg (2 lb 14 oz) each When attached to supplied speaker stand: Approx. 1.4 kg (3 lb 1 oz) each, (Front (and rear) speakers) Approx. 1.4 kg (3 lb 1 oz), (Center speaker)
SA-WMS7 (subwoofer) (SA-VE705 and SA-VE702 only)
Active subwoofer, magnetically shielded Speaker unit Woofer: 20 cm (8 in.), cone type Enclosure type Advanced SAW type Practical maximum output 120 W Reproduction frequency range 24 Hz - 150 Hz Inputs LINE IN (input pin jack) SPEAKER IN (input terminals) Outputs LINE OUT (output pin jack) SPEAKER OUT (output terminals) General Power requirements USA and Canada: 120 V AC, 60 Hz Europe: 220 - 230 V AC, 50/60 Hz Others: 220 - 240 V AC, 50/60 Hz Power consumptions 80 W Dimensions (w/h/d) Approx. 470 mm (9 1/18 5/8 in.), including front grille Mass Approx. 17 kg (37 lb 8 oz) System Speaker system
SS-V703 Speaker stands (for the rear speakers) (2) Speaker stand (for the center speaker) (1) Screws (for the speaker stands) (6) Washers (for the speaker stands) (6) Plates (for the rear speaker stands) (2) Speaker grilles (3) Hex wrench (1) Speaker connecting cords, 2.5 m (8 ft 2 1/2 in.) (1) Speaker connecting cords, 10 m (32 ft 9 3/4 in.) (2)
Design and specifications are subject to change without notice.

Supplied accessories

SA-VE705 Speaker stands (for the front and rear speakers) (4) Speaker stand (for the center speaker) (1) Screws (for the speaker stands) (10) Washers (for the speaker stands) (10) Plates (for the front and rear speaker stands) (4) Speaker grilles (5) Hex wrench (1) Audio connecting cord (1) Speaker connecting cords, 2.5 m (8 ft 2 1/2 in.) (5) Speaker connecting cords, 10 m (32 ft 9 3/4 in.) (2) SA-VE702 Speaker stands (for the front speakers) (2) Screws (for the speaker stands) (4) Washers (for the speaker stands) (4) Plates (for the front speaker stands) (2) Speaker grilles (2) Hex wrench (1) Audio connecting cord (1) Speaker connecting cords, 2.5 m (8 ft 2 1/2 in.) (4)

SS-V703

SERVICE MANUAL
The SS-V703 is the set of speakers system that consists of three pieces of the SS-MS7 speakers sysytem which is supplied with the SA-VE702. For the SS-MS7, refer to the Service Manual SA-VE702/VE705/WMS7/ SS-MS7(9-928-978-XX)
AEP Model UK Model E Model

PARTS LIST

Part No. Description Remark
ACCESSORIES & PACKING MATERIALS ******************************** 1-791-467-11 CORD, SPEAKER(10m) 1-791-467-21 CORD, SPEAKER(2.5m) 3-867-384-23 MANUAL, INSTRUCTION(GERMAN, SPANISH, DUTCH, SWEDISH, ITALIAN, POLISH, PORTUGUESE, RUSSIAN, FINNISH, DANISH, CHINESE ) 3-867-384-31 MANUAL, INSTRUCTION(ENGLISH, FRENCH) 4-222-421-01 SCREW(5x18), HEXAGON SOCKET * 4-985-459-01 X-4951-969-1 X-4952-023-1 X-4952-024-1 WRENCH, HEXAGON SHAFT FRAME ASSY, GRILLE STAND (V) ASSY STAND (H) ASSY

MICRO SATELLITE SYSTEM

MICROFILM

Sony Corporation

9-929-039-11
Home Audio Division Company
99K001668-1 Printed in Japan 1999.11 Published by Quality Assurance Dept.