Reviews & Opinions
Independent and trusted. Read before buy Sony STR-DE585!

Sony STR-DE585

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony STR-DE585 Home Cinema Amplifier, size: 862 KB
Related manuals
Sony STR-DE585 Annexe 2
Sony STR-DE585 Annexe 3
Sony STR-DE585 Annexe 1

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony STR-DE585About Sony STR-DE585
Here you can find all about Sony STR-DE585 like manual and other informations. For example: .

Sony STR-DE585 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony STR-DE585 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony STR-DE585 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
Bob_G 8:17pm on Thursday, November 4th, 2010 
This is my very first receiver. However my expectations are beated. This is my very first receiver. However my expectations are beated. This is an excellent reciever for the price, except for one major flaw. There is no way to adjust the volume for the front left and right channels.
mein 3:23am on Monday, October 25th, 2010 
Just replaced this with an Onkyo This reciever was fine for a while but then I lost the dolby processing, the center channel started dropping out.
derf04060507 8:17am on Saturday, September 11th, 2010 
5.1 but how??? I bought this amplifier over a month ago but it is only now that I have realised how to get true surround sound.
vvume 3:58am on Thursday, April 22nd, 2010 
Absolutely Love it This receiver is a dream. It produces amazing sound quality with MANY options for different effects.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

NOW DEMONSTRATION MODE IF OU FINISH DEMONSTRATION LEASE PRESS POWER KEY WHILE HIS MESSAGE APPEARS IN THE ISPLAY THANK YOU
o cancel the demonstration -ess I/& to turn the receiver off while the above essage is being displayed. The next time you m the receiver on, the demonstration will not spear. o view the demonstration old down SET UP and press I/& to turn on the wer. otes Running the demonstration will clear the receivers memory. For details on what will be cleared, see Clearing the receivers memory on page 15. There will be no sound when the demonstration mode is activated. You cannot cancel demonstration if you did not press I/& while the above message is being displayed. To cancel demonstration after the above message appears, press lK!I twice to activate the demonstration again. Then, press I/& while the above message is being displayed.
Tip The instructions in this manual describe the controls on the receiver. You can also use the controls on the supplied remote if they have the same or similar names as those on the receiver. For details on the use of your remote, see l pages 38-44 for RM-PP506 (STR-DE585 area code CA only) l pages 45-48 for RMJJ306 (except for STR-DE585 area code CA)

Illustration

number

How to use this

Use this page to find the location of buttons that are mentioned in the text.

Name of button/part

NAME t

& (35) t

Reference page

/ ALPHABETICAL

A.DEC (23-25) AM (Except for models of area code CEL, CEK) (30,31) BASS +/(29, 54) CDa(21) CINEMA STUDIO EX A. B, C (23. 24) Di ital Cinema Sound (indicator) 12 $ (23) DIMMER (22) DISPLAY (22,33, S I ) (22) Display DVD/LD (2 1)
FM MODE (Models of area code CEL, CEK only) a, (Except for models of area code CEL, CEK) Es (31) (21) INPUT MODE IR (receptor) & (38,45, 51) LEVEL (20, 27,55)
MASTER VOLUME (20,49) MD/TAPE (21) MEMORY (30,32) MENU +I(16, 27, 35.36) MENU <I> (16,27, 35, 36) MODE (24,50) MULTI CHANNEL DECODING (indicator) (Exe t for STR-DE485E) d7 (21) MULTI CH IN (Except for STR-DE485E) (21) (2 I, 49) MUTING

q q q q

PRESETiPTY SELECT +l(Models of area code CEL, CEK only) (32, 33) PRESET TUNING +/- (Except for models of area code CEL, CEK) (32,53) PTY (Models of area code CEL, CEK only) (33) SET UP (4, 16, 36, 54) SHIFT (32) SLEEP (STR-DE485E only@

SURR T-Z

(27,54)
TREBLE +I(29,54) TUNER (2 I, 30-32, 35) (3 I) TUNING +/VIDEO I (21) VIDEO 2 (21)
BUTTON ENTER j (35) FM (Except for models of area code CEL, CEK) (30,3 1) FM/AM (Models of area code CEL, CEK only) (30, 3 1)

DESCRIPTIONS

NAME (35) PHONES (jack)

I/b (power) 30,53)

(4, 15,20, 29,
Audio cord (not supplied)
White (L) Red (R) White (L) Red (R)

Audio/video

cord (not supplied)
Yellow (video) White (l-/audio) Red (R/audio) Yellow (video) White (L/audio) Red (R/audio)
Video cord (not supplied)
Yellow (video) a~= Yellow (video)
Optical digital cord (not supplied)

Black v 1m Black

Coaxial digital cord (not supplied)

Orange ayn Orange

Monaural audio cord (not supplied)

Black m Black

Before you get started
Turn off the power to all components before making any connections. Do not connect the AC power cord until all of the connections are completed.
Be sure to make connections firmly to avoid hum and noise. When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
When you connect optical digital cords, insert the cord plugs straight in until they click into place. Do not bend or tie the optical digital cord.

utannahadkups

AM loop antenna (supplied) FM wire antenna* (supplied) ,

t _ ~,j;&:. >)

:.The shapeof the connector varies dependingon the areacode.

on antenna

hookups
- To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible.

CD player

DVD or LD player

TV monitor

Note on video component hookups
You can connect your TVs audio output jacks to the VIDEO 2 AUDIO IN jacks on the receiver and apply sound effects to the audio from the TV. In this case,do not connect the TVs video output jack to the VIDEO 2 VIDEO IN jack on the receiver. If you are connecting a separateTV tuner (or satellite tuner), connect both the audio and video output jacks to the receiver as shown above.

Required

Speaker cords (not supplied)

Monaural

audio cord (not supplied)

Black -YD Black

1 Front speaker

1Surroumlspeaker

1 / Surrou;f;peaker

Center speaker

Speaker system hookup (continued)
Twist the stripped ends of the speakercords about 10 mm (2/3 inch). Be sure to match the speaker cord to the appropriateterminal on the components: + to + and -to -. If the cords are reversed,the sound will be distorted and will lack bass. If you use speakerswith low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
Stripped cords are touching each other due to excessive removal of insulation. After connecting all the speakers, and AC power a test tone to check that speakers are connected For details on outputting see page 20. components, cord, output all the correctly. a test tone,

To avoid speakers

short-circuiting
Short-circuiting of the speakers may damage the receiver. To prevent this, make sure to take the following precautions when connecting the speakers. Make sure the stripped ends of each speaker cord does not touch another speaker terminal, the stripped end of another speaker cord, or the metal parts of the receiver.
If no sound is heard from a speaker while outputting a test tone or a test tone is output from a speaker other than the one whose name is currently displayed on the receiver, the speaker may be short-circuited. If this happens, check the speaker connection again.
Examples of poor cord speaker

conditions

of the

damaging

Make sure that you turn down the volume before you turn off the receiver. When you turn on the receiver, the volume remains at the level you turn off the receiver.
Stripped speaker cord is touching speaker terminal.

another

Performinginitial setup operations
Once you have hooked up the speakersand turned on the power, clear the receivers memory. Then specify the speakerparameters (size, position, etc.) and perform any other initial setup operations necessaryfor your system.
Tip To check the audio outputduring settings (to set up while outputting sound). check the connection the (page 20).

Performing operations

initial
Before using your receiver for the first time, adjust SET UP parametersso that the receiver correspondto your system. For the adjustable parameters,seethe table on page 54. Seepages 16-20 for speakersettings and pagesfor other settings 36-31.

Clearing memory

the receivers
Before using your receiver for the first time, or when you want to clear the receivers memory, do the following. This procedure is not necessaryif the demonstration activates when you turn on the power.

1 Turn

off the receiver.
2 Hold down I/C!l for 5 seconds.
The demonstration starts (page 4) and all of the following items are reset or cleared: All preset stations are reset or cleared. All sound field parametersare reset to their factory settings. All index names(of preset stations and program sources)are cleared. All SET UP parametersare reset to their factory settings. The sound field memorized for each program source and preset stations are cleared. The master volume is set to VOL MIN.

l l l l l l

For the best possible surround sound, all speakersshould be the samedistance from the listening position (0). However, the receiver lets you place the center speakerup to 1.5 meters (5 feet) closer (0) and the surround speakersup to 4.5 meters (15 feet) closer (@) to the listening position. The front speakerscan be placed from 1.Oto 12.0 meters (3 to 40 feet) from the listening position (0). You can place the surround speakerseither behind you or to the side, dependingon the shapeof your room (etc.).
When placing surround speakers to your side

% $ P c f 1 I f Q ;p 3

continued
Multi channel surround setup (continued)
When placing surround speakers behind you
The setting for Micro Satellite Speaker(MICRO SP.) has been programmedto optimize the sound balance. If you use Sonys Micro Satellite Speakers,select MICRO SP.

Caution

When you use Micro Satellite Speakersand the speakersize is set to LARGE, you may not obtain the correct soundstage. The speakermay also be damagedat high volume position.

Specifying parameters

the speaker

1 Press SET UP.

Do not place the center speakerfarther away from the listening position than the front speakers.
2 Press MENU < or MENU > to select the parameter you want to adjust. 3 Press MENU + or MENU -to setting you want. 4 select the

Normal Satellite

Speaker and Micro Speaker
Select NORM. SP. MICRO SP.
The setting is enteredautomatically.

Repeat steps 2 and 3 until you have set all of the parameters that follow. settings Initial setting LARGE LARGE; LARGE: YES
5.0 m (16 ft.):::: 5.0 m (16 ft.)*<: 3.5 m (I 1 ft.);

If vou are usina

Normal Speakers Micro Satellite Speakers

Initial

The speakersize and the sub woofer selection has beenpreset to NORM. SP. You can adjust the speakersize and sub woofer selection when you select NORM. SP. (pages 17-18) To select MICRO SP., turn off the power, then turn on again while pressing LEVEL. (To reset to NORM. SP., do the sameprocedure.) When you select MICRO SP., the speakersize and sub woofer selection has beenconfigurated as follows:
Speaker FRONT CENTER SURROUND SUB WOOFER Settings SMALL SMALL SMALL YES
Parameter :a :a (FRONT) ;@ (CENTER) :&.& (SURROUND).I ^.I @$ (SUB WOOFER) S.W. XXX ;$tJ e@ DIST. Xx.X m (ft.)** :@ DIST. Xx.X m (ft.)** I. ;@ @ DIST. Xx.X m (ft.)**.~

BEHD. LOW

You can set this parameteronly when you select NORM. SP. a* Models of areacode U, CA only.
You cannot changethe configuration if you select MICRO SP.

n Front speaker size (ia

@) If you connect large speakers that will effectively reproduce bass frequencies, select LARGE. Normally, select LARGE.

W Surround

speaker size (<a
If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select SMALL to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to SMALL, the center and surround speakers are also automatically set to SMALL (unless previously set to NO).
If you connect large speakers that will effectively reproduce bass frequencies, select LARGE. Normally, select LARGE. However, if the front speakers are set to SMALL, you cannot set the surround speakers to LARGE. If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select SMALL to activate the bass redirection circuitry and output the surround channel bass frequencies from the sub woofer or other LARGE speakers. If you do not connect surround speakers, select NO,* lip i:il-*3 correspondto the following Dolby Pro Logic modes *I NORMAL :::2 PHANTOM :STEREO Tip Internally, the LARGE and SMALL settings for each speakerdetermine whether the internal sound processorwill cut the basssignal from that channel. When the bassis cut from a channel, the bass redirection circuitry sendsthe correspondingbass frequenciesto the sub woofer or other LARGE speakers. However, since basssoundshave a certain amount of directionality, it is best not to cut them, if possible. Therefore, even when using small speakers,you can set them to LARGE if you want to output the bass frequenciesfrom that speaker.On the other hand, if you are using a large speaker,but prefer not to have bassfrequenciesoutput from that speaker,set it to SMALL. If the overall sound level is lower than you prefer, set all speakersto LARGE. If there is not enough bass, you can use the BASS +/-to boost the basslevels. To adjust the bass,seepage 29. continued

CTR XXX dB *

BALANCE

SUR.L. XXX dB* SUR.R. XXX dB* S.W. XXX dB* L.F.E. XXX dB :d.iii& -,.. COMP. XXX

OdB OdB OdB OdB OFF

* The parameterscan be adjustedseparatelyfor MULTI CH IN (STR-DE585 and STR-DE485only). Front balance (:a :@ BAL. L/B XXX)
Lets you compressthe dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the MAX setting.
Lets you adjust the balancebetween front left and right speakers.
Center level (CTR XXX dB)
To reproduce the sound track with no compression, select OFF. To reproduce the sound track with the dynamic range intended by the recording engineer, select STD. To compress the dynamic range in small steps to achieve the sound you desire, select O.l0.9. To reproduce a dramatic compression of the dynamic range, select MAX.
Lets you adjust the level of the center speaker.
Surround left level (SUR.L. XXX dB)
Lets you adjust the level of the surround left speaker.
Surround right level (SUR.R. XXX dB)
Lets you adjust level of the surround right speaker.
Sub woofer level (S.W. XXX dB)
Note Dynamic range compression is possible with Dolby Digital sources only.
Lets you adjust the level of the sub woofer
LFE (Low Frequency Effect) level (L.F.E. XXX dB) mix
Lets you attenuatethe level of the LEE (Low Frequency Effect) channel output from the sub woofer without effecting the level of the bass frequencies sent to the sub woofer from the front, center or surround channelsvia the Dolby Digital or DTS bassredirection circuitry.

the bass and treble

The BASS +/-and TREBLE +/- button lets you adjust the tone (bassor treble) of the front speakersfor optimum sound. You can adjust the tone for each separatesound field.
Start playing a program source encoded with multi channel surround
2 Press BASS +I- or TREBLE +I- to adjust the tone.
The setting is stored automatically.

BASS TREB.

settings

Initial setting OdB OdB

BASS (Bass)
Lets you adjust the basstone

TREB. (Treble)

Lets you adjust the treble tone
Resetting customized sound fields to the factory settings
lf the power is on, press I/O to turn off the power.
2 Hold down MODE and press I/C!).
SF. CLR. appearsin the display and all sound fields are reset at once.

Before receiving broadcasts,make sure you have connectedFM and AM antennasto the receiver (page 7).
Do not press any button op the receiver or supplied remote dung autobetical operation. If you move to another area, repeat this procedure to store stations in your new area. For details on tuning the stored stations, see page
* If you move the antenna after storing stations with this procedure. the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.

(Models

of area

CEL, CEK only)

Direct tuning
You can enter a frequencyof the stationyou want directly by using the numeric buttonson the suppliedremote.For details on the buttonsused in this section,seepages3844 for remote RM-PP506 and pages45-48 for remote RM-U306.
This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only storesthe stations with the clearest signals. If you want to store FM or AM stations one by one, seePresetting radio stations on page 32.
Press I/& to turn OR the receiver.
Press TUNER on the remote.
2 Hold down MEMORY and press l/C!) to turn the receiver back on.
The last received station is tuned in.
Press FM* or AM* to select the FM or AM band.
AUTO-BETICAL SELECT appearsin the display and the receiver scansand stores all the FM and FM RDS stations in the broadcastarea. For RDS stations, the tuner first checks for stations broadcastingthe sameprogram, then storesonly the one with the clearest signal. The selectedRDS stations are sorted alphabetically by their Program Service name, then assigneda 2-characterpreset code. For more details on RDS, seepage 33. Regular FM stations are assigned 2-characterpreset codes and stored after the RDS station. When done, FINISH appearsin the display momentarily and the receiver returns to the normal operation.
3 Press D. TUNING on the remote. 4 Press the numeric frequency. buttons to enter the

Example 1: FM 102.50 MHz

Example 2: AM 1350 kHz (You dont have to enter the last 0 when the tuning scale 1s set to 10 kHz.)
If you cannot tune in a station and the entered numbers flash
Make sure youve enteredthe right frequency. If not, repeat steps3 and 4. If the enterednumbers still flash, the frequency is not used in your area.
F For models of area code CEL. CEK: FM/AM.

You can switch the command mode (AVl or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operatethe receiver.
Press 1 (AVl) (or 2 (AV2)) while pressing down USE MODE
The indicator lights once (twice for AV2) , then the command mode switches.
Selecting the mode of the remote (continued)
To check the mode of the remote
PressUSE MODE. You can check the remote by the indicator.
Mode AVl AV2 Indicator once twice lights
3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control.

To reset settings

to faCtOrY
Seethe tables on pages43 and 44 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspondto the category and the makers code respectively.)

4 Press ENTER.

Press I/&, AV I/&, the same time.

and MASTER VOL - at

The indicator lights 3 times, then goes off.
Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode.
5 Repeat steps 1 to 4 to control other components.

To cancel programming

llgtfre

rMROt8

You can program the remote to control nonSony componentsby changing the code. Once the control signals have been memorized, you can use those componentsas part of your system. Futhermore, you can also program the remote for Sony componentsthat the remote is unable to control. Note that the remote can only control componentsthat accept infrared wireless control signals.
Note When you assign a component to the MONITOR button, you can operate the programmed component without changing the function of the receiver.
PressUSE MODE during any step. The remote automatically exits the programming mode.
To activate programming. the function after
Pressthe programmed button to activate the function you want.

TV TV TV

VCR/ CD player/ VCD player/ LD player/ DVD player/ MD decki DAT deck/ Tape deck VCR/ CD player/ VCD player/ LD player/ DVD player/ MD player/ DAT deck/ Tape deck
Pauses play or record. (Also start recording with components in record standby.)
Notes When you press the function buttons (VIDEO 1, VIDEO 2, DVDnD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press the TV/VIDEO button to switch the input mode of the TV. l Some functions explained in this section may not work depending on the model of the receiver. l The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. l The MULTI CH functions is not available for set operation (STR-DE485E only).

To reset setting

a button

to its factory

Repeat the above procedure. If the factory settingsof the FUNCTION buttons do not match your systemcomponents, you can changethem. For example,if you have a tape deck and you do not have an MD deck, you can assignthe MD/TAPE button to your tape deck. Note that the settingsof the TUNER button cannotbe changed.
To reset all the function their factory setting buttons to
PressI/& AV I/6 and MASTER VOL - at the sametime.
Hold down the Function button whose function you want to change (for example, MD/TAPE).
2 Press the corresponding button of the component you want to assign to the Function button (for example, 4 - Tape deck). The following buttons are assignedto select the functions: To operate Press 1 CD player
DAT deck MD deck Tape deck A Tape deck B LD player VCR 6 1* 1 2*) 3*) I 0
(command modeVTR VCR (command modeVTR VCR (command modeVTR
DSS(Digital Satellite Receiver) DVD VCD player
* SonyVCRsareoperated a VTR 1,2 or with setting. These correspond Beta, 8mm and to

VHS respectively.

Now you can use the MD/TAPE button to control the tape deck.

On operation

Before connecting other components. be sure to turn off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver. please consult your nearest Sony dealer.

Troubleshooting

(continued)
There is no sound from the active sub woofer.
There is no sound output from the SUB WOOFER terminal dependingon the sound field (page 55).
There is no sound from a specific

component.

Check that the component is connectedcorrectly to the audio input jacks for that component. Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component. Check that you have selectedthe correct component on the receiver.

The surround

effect cannot be obtained.
Make sure the sound field function is on (press MODE).
Dolby Digital or DTS multi channel sound is not reproduced.
There is no sound from one of the front speakers.
Connect a pair of headphones the PHONES jack to to verify that sound is output from the headphones (page 21). If only one channel is output from the headphones, the componentmay not be connectedto the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channelsare output from the headphones, the front speakermay not be connectedto the receiver correctly. Check the connection of the front speakerwhich is not outputting any sound.
The left and right sounds are unbalanced reversed.
Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connectedcomponent.

cannot be done.

Reference Power Output

(8 ohms 1 kHz, THD 0.7 %) FRONT: 100 W/ch STR-DE585: CENTER: 100 W SURR: IN W/ch FRONT: 80 W/ch STR-DE485: CENTER: 80 W SURR: 80 W/ch
3) INPUT SHORT (with sound field and tone bypassed). 4) Weighted network, input level.

Inputs (Digital)

DVD/LD (Coaxial) Sensitivity: Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: Impedance: S/N: 100 dB (A. 20 kHz LPF)
Models of area code CEL,CEK Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %) IooW+ lOOW2 STR-DE585: 80 W + 80 W STR-DE485E: VIDEO 2 (Optical)
(8 ohms 1 kHz, THD 0.7 %) FRONT: 100 W/ch STR-DE585: CENTER: 100 W SURR: 100 W/ch FRONT: 80 W/ch STR-DE485E: CENTER: 80 W SURR: 80 W/ch

Outouts

MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 250 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms
Models of other area code Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %) 80 W + 80 W
Gain levels: +6 dB, 1 dB step section 87.5 108.0 MHz FM tuner

Reference Power OutpuV

(8 ohms 1 kHz, THD 10 %) FRONT: 100 W/ch CENTER: 100 W SURR: 100 W/ch
Tuning range Antenna terminals Intermediate Frequency

75 ohms, unbalanced

10.7 MHz

Sensitivity

Mono: stereo: 18.3 dBf, 2.2 pV/75 ohms 38.3 dBf, 22.5 pV/75 ohms 11.2 dBf, I pV/7S ohms
General Power requirements Power requirements Area code
U, CA, MX CEL, CEK 120VAC,60Hz 230 V AC, SO/60 Hz 220 - 230 V AC. SO/60 Hz 120/220/240 V AC. SO/60 Hz 110 V AC, SO/60 Hz 240 V AC, SOHz

Usable sensitivity SIN

Mono: stereo:
76 dB 70 dB at 1 kHz 0.3% 0.5%

45 dB at 1 kHz

SP E2lE3

Harmonic distortion

stereo: Separation Frequency response Selectivity

30 Hz - 15 kHz,

+O.S/-2 dB 60 dB at 400 kHz
Power consumption Power consumption Area code
U, MX CA CEL, CEK AU, SP. E2iE3 Tw STR-DE485: 180 W STR-DES85: 300 VA STR-DE485: 260 VA STR-DESSS: 180 W STR-DE48SE: 155 W STR-DE485: 155 W STR-DE485: 400 W
AM tuner section Tuning range Models of area code U, CA
With IO-kHz tuning scale: 530 - 1710 kHz With 9.kHz tuning scale: 531 - 1710 kHz
Models of area code E2iE3, MX
With 10.kHr tuning scale: 530 - 1610 kHz With 9.kHz tuning scale: 531 - 1602 kHzi

Models of area code AU, SP, CEL, CEK, TW
With 9-kHz tuning scale: 531 - 1602 kHz Loop antenna

Power consumption

(during standby mode)
430 x 145 x 298 mm (16 7/8 x 5 6/8 x 11 6/8 in.) including projecting parts and controls 7.0 kg (1Slb 7 oz)

Dimensions

Antenna Intermediate Frequency

450 kHz

Mass (Approx.) Supplied accessories
Usable sensitivity S/N Harmonic distortion Selectivity

At 9 kHz: At 10 kHz:

SO dB/m (at 1,000 kHz or 999 kHa) 54 dB (at SO mV/m) 0.5 % (50 mV/m. 400 Hz)

35 dB 40 dB

5) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press l/6. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
FM wire antenna (1) AM loop antenna (1) * STR-DES85 only * Models of area code CA Remote commander RM-PPS06 (1) R6 (sire-AA) batteries (2) l Models of area code CEL, CEK Remote commander RM-U306 (1) R6 (size-AA) batteries (2) l STR-DE48SE/DE485 only Remote commander RM-U306 (1) R6 (size-AA) batteries (2) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice.

Video Inputs

Video:

section

1 Vp-p, 75 ohms

outputs

Video: I Vp-p, 75 ohms
You can make various settings using the LEVEL, SURR, SET UP, MENU +/-, and MENU < I > buttons. The tables below show each of the settings that these buttons can make.
Press SURR LEVEL Press MENU < or MENU > to select EFFECT.m $?$ BAL. L/R XXX Press MENU + or MENU -to L +8 to R +8 (1 steps) -lOdBto+lOdB(ldBsteps) -10 dB to +lO dB (1 dB stem) -lOdBto+lOdB(ldBsteps) -lOdBto+lOdB(ldBsteps) OFF, -20 dB to 0 dB (1 dB steps) OFF, 0.1 to 0.9 (0.1 steps), STD, MAX LARGE, SMALL LARGE. SMALL. LARGE, SMALL, YES, NO between 1.0 meters and 12.0 meters (0.1 meters steps) between.a: :C%J DIST. and I.5 meters CO. meters steps) 1 between i@ :% DIST. and 4.5 meters CO. meters steps) 1 SIDE, MID, BEHD. HIGH, LOW AVI, AV2 DOLBY PL, II MOVIE, II MUSIC 1) For models of area code U, CA: 3 feet to 40 feet (1 foot steps) 2) For models of area code U, CA: between.a; i@ DIST. and 5 feet (1 foot steps) 3) For models of area code U, CA: between @ i@ DIST. and 15 feet (1 foot steps) 4) STR-DE585 only. 31 NO NO 16 select Page 21 28

To locate the servicer or dealer nearest you, or for service assistance or resolution of a service problem, or for product information or operation, call: Sony Direct Response Center l-(800)-222-7669 or write to: Sony Direct Response Center 12451 Gateway Blvd. Fort Myers, FL 33913 For an accessory or part not available from your authorized dealer, call: I-(800).488.SONY (7669)

 

Tags

ICD-SX88 DVP3000K N10E ONE Inspiron 4150 WIN 70 WM551 ZR 830 DAT72 4550B VP-D33I PSS-26 Camera SA-PM88 Pradovit P150 Digitech RP20 MC225 LN40A330 Router WB5500 Selphy Model HDT8010 KD-DV5101 DMR-E70V SLV-SE730E KF 3000 Yamaha MD8 DSP-Z9 AJ4200 KD-G611 TX-14P1F TX-D37lq81F CD1401B 57 UX-H300 GA-P55a-ud3 TL-WR741N T3-M3n8200 PSS780 TL-SF1005D SP-404SX DMC-FX520 W 1512 ESI6241X BWM401 DP2800 1100P Plus Urc-3451 74-3333 CU-RE9HKE RM4213 Quattro VM-3100 PRO SGH-T329 HBH-662 Ru 760 -V2936 Frontier-2003 Deskjet 5151 DP-500M EFC9550X A 2 0 LE40S67BD WL600G 2 2 Kd-g820 Independence Recettes SR-L36nebs 21FJ8RL Aspire-5000 TX-DS777 Arxxf 129 C532DN CDX-L580X DKS-2000Q ICF-C205 TX-NR5000E Compact Gigabeat X Yamaha CS1X VGC-V3S 190CW8FB Bassman LTD NVX200 WK-3500 T1413 HD162HJ XRS 9740 Abit AI7 PV400 P4TCM M1000 323R-II TH-37PA60E RS-BX606 XCF-W EL-50 UX-MF70 ESF 675 Electronic

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101