Reviews & Opinions
Independent and trusted. Read before buy Sony STR-DH810!

Sony STR-DH810

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Sony STR-DH810 Home Cinema Amplifier, size: 1.6 MB
Related manuals
Sony STR-DH810 Annexe 1
Sony STR-DH810 Annexe 2

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony STR-DH810Sony STR DH810 AV receiver

7.1 channel

Take your HD surround sound experience to new heights with the STR-DH810 A/V receiver. Offering an abundance of connectivity options (4 HDMI, 3 component), you will have room for all your components including a Blu-ray player, PS3 system, DVD player and more. And with DVD upscaling via HDMI you can watch DVDs in near HD quality. This 7.1-channel receiver has LPCM, Dolby trueHD and dts-HD decoding technologies for audio that is true to the original master recording. The STR-DH810 features wireles... Read more

 

[ Report abuse or wrong photo | Share your Sony STR-DH810 photo ]

Video review

How to Make Your Sony 7.1 Receiver Support 3D Blu Ray

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
Valodya 2:01am on Wednesday, August 25th, 2010 
The first unit was replaced due to some issues with the HDMI inputs and the new unit is fine.
jta 1:35pm on Monday, August 23rd, 2010 
Purchased Sony again since my previous receiver was Sony that lasted & performed well. Although this model has good power output.
cljohnson 5:55pm on Tuesday, August 3rd, 2010 
My $600.00 Yamaha receiver (6 months old) broke and needed to go to service. I bought the Sony STR-DH810 to use while my Yammy was being fixed.
Meeks 6:01pm on Saturday, July 31st, 2010 
Sony Dolby Digital HDMI Amp/Receiver Bought this as a replacement for a Kenwood KAV8000. Four HDMI connections work well.
nutusikpusik69 6:11am on Friday, July 9th, 2010 
I upgraded from a 2003 SONY A/V receiver to get on par with the new audio codecs for Blu-Ray. The sound from these new codecs like DTS TrueHD. Very good~!! Accurate Controls","Easy Setup","Energy Efficient","Good Power Output","Good Remote Control","Great Sound Quality
hobbes 9:07am on Sunday, April 25th, 2010 
I have a mixture of SD (Go Video DVD/VCR) and HD (Dish HD DVR, OTA HD, with a Panasonic HDTV) equipment and when my old receiver died.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Remote commander

You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. You can also program the remote to control non-Sony audio/video components. For details, see Programming the remote (page 85).

Y, PB/CB, PR/CR IN/OUT

RM-AAP049 (Models of area code U2 only) RM-AAP050 (Models of area code CEL, CEK only)

wg wf wd ws

BD DVD SAT/ CATV
COMPOSITE VIDEO INPUT/ OUTPUT jacks (page 21, 27, 29, 30)

Yellow

VIDEO IN/OUT

VIDEO 2

* You can watch the selected input image when you connect the HDMI TV OUT or MONITOR OUT jack to a TV (page 21, 24).

SA-CD/ CD

DMPORT

HDMI 1

HDMI 2

HDMI 3

HDMI 4
F SPEAKERS section (page 19)

wa w; ql qk qj

. < < >

qh qg qf qd

To control the receiver
Be sure to press AMP (C) to change the remote button function to control the receiver. Name and function
A ?/1b) (on/standby) Turns the receiver on or sets it to standby mode.

Name and function

Q RETURN/EXIT O Returns to the previous menu. R , V/v/B/b Press V/v/B /b to select the settings, then press to enter the selection.
Saving the power in standby mode
When CTRL: HDMI is set to CTRL OFF (page 76) and S-AIR STBY is set to STBY OFF (page 76). C AMP The button lights up and activates the receiver operation (page 38, 44, 45). D Input buttons Selects the component you want to play back or record. When you press any of the input buttons, the receiver turns on. The buttons are initial assigned to control Sony components. Numeric buttonsc) (number 5a)) Presets or tunes to preset stations. ENTERc) Enters the selection during tuner operation. MEMORYc) Stores a station during tuner operation. E SOUND FIELD +/ Selects a sound field (page 51). G AMP MENU Displays the menu to operate the receiver. I MENU/HOME Displays the receiver menus. J TUNING +/ Scans a station. D.TUNING Enters direct tuning mode. K PRESET +a)/ Selects preset stations. L SLEEP Activates the Sleep Timer function and the duration which the receiver turns off automatically. N MUTING (RM-AAP049 only) (RM-AAP050 only) Turns off the sound temporarily. Press again to restore the sound. O MASTER VOL +/ (RM-AAP049 only) +/ (RM-AAP050 only) Adjust the volume level of all speakers at the same time.
T DISPLAY Views information on the display. U NIGHT MODE Activates the Night Mode function (page 55). V SHIFT The button lights up and activates the buttons with pink printing. Y RM SET UP Set up the remote.
The following buttons have tactile dots. Use the tactile dots as references when operating the receiver. number 5, VIDEO 1 N PRESET +, TV CH + (RM-AAP049 only), PROG + (RM-AAP050 only), c (RM-AAP050 only) b) If you press ?/1 (A) and AV ?/1 (B) simultaneously, the receiver and connected components will turn off (SYSTEM STANDBY). c) Press SHIFT (V) then only press this button.

Front A speaker

A Monaural audio cord (not supplied) B Speaker cord (not supplied)
Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection. If you connect only one surround back speaker, connect it to L of this terminals. If you are not using surround back speaker or front high speakers, and you have an additional front speaker system, connect the additional front speaker system to this terminals. Set SB ASSIGN to SPK B in the SPEAKER menu (page 80). You can select the front speaker system you want using the SPEAKERS button on the receiver (page 34). If you are not using surround back speaker or front high speakers, you can connect the front speakers to this terminals using bi-amplifier connection (page 20). b) When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output.

Bi-amplifier connection

If you are not using surround back speakers or front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals using a bi-amplifier connection.
Front speaker (Right) Front speaker (Left)

EZW-T100 ANTENNA

IN 4 IN 3 IN 2 IN 1 TV OUT ARC
IN 3 IN 2 IN 1 MONITOR OUT
Before connecting the AC power cord (mains lead), make sure that metalic wires of the speaker cords are not touching each other between the SPEAKERS terminals. After you have install and connect your speaker, be sure to select the speaker pattern from SPEAKER menu (page 78).
Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver. After you have made the bi-amplifier connection, set SB ASSIGN to BI-AMP in the SPEAKER menu (page 71).

3: Connecting the TV

Connections Before connecting cords, be sure to disconnect the AC power cord (mains lead).
TV Video signals Audio signals Audio/Video signals
A Component video cord (not supplied) B Video cord (not supplied) C Optical digital cord (not supplied) D Audio cord (not supplied) E HDMI cable (not supplied)

PlayStation 3 Audio/video signals
Satellite tuner, Cable TV tuner Audio/video signals
DVD player, DVD recorder Audio/video signals

Blu-ray disc player

Audio/video signals
Audio/video signals TV, etc.*
A HDMI cable (not supplied)
We recommend that you use a Sony HDMI cable. * See page 21 for the audio connection of TV to the receiver.
Be sure to change the initial setting of the HDMI 14 input button on the remote so that you can use the button to control your components. For details, see Programming the remote (page 85). You can also rename the HDMI input so that it can be displayed on the receivers display. For details, see Naming inputs (page 44).
Notes on connecting cables
Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p or Deep Colour (Deep Color) images may not be displayed properly. Sony recommends that you use an HDMI authorized cable or Sony HDMI cable. We do not recommend using an HDMI-DVI conversion cable. When you connect an HDMI-DVI conversion cable to a DVI-D component, the sound and/or the image may not be output. Connect other audio cords or digital connecting cords, then set A. ASSIGN in AUDIO menu (page 69) when the sound is not output correctly.
Notes on HDMI connections
An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks, HDMI TV OUT jack and PHONES jack. It is not output from any other audio jacks. Video signals input to the HDMI IN jack can only be output from the HDMI TV OUT jack. The video input signals cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks. When you want to listen to the sound from the TV speaker, set AUDIO OUT to TV+AMP in the HDMI menu (page 84). If you cannot play back multi channel software, set to AMP. However, the sound will not output from the TV speaker. DSD signals of Super Audio CD are not input and output. The multi/stereo area audio signals of a Super Audio CD are not output. Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable.

Sound may be interrupted when the sampling frequency, the number of channels or audio output signals from the playback component is switched. When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output. In this case, check the specification of the connected component. Be sure to turn on the receiver when video and audio signals of a playback component are being output to a TV through this receiver. If you set PASS THRU to OFF, video and audio signals will not be transmitted when the power is turned off. Set the image resolution of the player to more than 720p/1080i to enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD). The image resolution of player may need certain settings be made before you can enjoy multi channel Linear PCM. Refer to the operating instructions of the player. Not every HDMI component supports all functions that are defined by the specified HDMI version. For example, components that support HDMI, version 1.4, may not support Audio Return Channel (ARC). Refer to the operating instructions of each connected component for details.
Connecting a Blu-ray disc player
Connections The following illustration shows how to connect a Blu-ray disc player.
Blu-ray disc player Video signals Audio signals
A Component video cord (not supplied) B Video cord (not supplied) C Optical digital cord (not supplied) D Coaxial digital cord (not supplied) E Audio cord (not supplied)
The initial setting of the COMPONENT VIDEO IN 1 jacks are Blu-ray disc player. If you want to connect your Blu-ray disc player to the COMPONENT VIDEO IN 2 or IN 3 jacks, set V. ASSIGN in the VIDEO menu (page 69). To input multi channel digital audio from the Bluray disc player, set the digital audio output setting on the Blu-ray disc player. Refer to the operating instructions supplied with the Blu-ray disc player.
* When you connect a component equipped with a COAXIAL jack, set A. ASSIGN in the AUDIO menu (page 69).
Connecting a DVD player, DVD recorder

AUTO CAL menu

You can use the AUTO CAL menu to make various adjustments for Auto Calibration settings and to name the position. For details on adjusting the parameters, see Using the setting menu (page 72).
x A.CAL START x CAL TYPE*
Lets you select the Auto Calibration type for each seating position. For details, see step 4 of 3: Confirming/saving the measurement results (page 38).
* You can select this parameter only when you have performed the Auto Calibration and saved the settings.

x POSITION

You can register three patterns as position 1, 2 and 3, depending on the seating positions, listening environment, and measurement conditions. If you do not select the position number, the Auto Calibration result will automatically save as POS 1 (initial setting).
To return to step 2 of 3: Confirming/saving the measurement results

Press Tip

Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value.
To register settings for the listening environment
You can select the seating position you want and register the measurement results of the Auto Calibration for that seating position.
1 Press AMP MENU. 2 Press V/v repeatedly to select <AUTO
CAL>, then press or b. or b.
3 Press V/v repeatedly to select

POSITION, then press

4 Press V/v repeatedly to select the
position (POS 1, 2, 3) for which you want to register the measurement results, then press.
5 Perform Auto Calibration and save the
measurement results. See 2: Performing Auto Calibration (page 37) and 3: Confirming/saving the measurement results (page 38). The measurement results is registered as the position you selected in step 4.
You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols To enter a blank space, press b without selecting a character.
6 Repeat steps 1 to 5 to register another

seating position.

4 Press
. The name you entered is registered.
To select the registered seating position 1 Repeat steps 1 to 3 of To register
settings for the listening environment (page 40).
2 Press V/v repeatedly to select position
(POS 1, 2, 3) you want, then press. The registered seating position is selected.

To exit the menu

Press MENU/HOME or AMP MENU.
x NAME IN (Naming position)
You can rename the position name.
1 Perform steps of To select the
registered seating position to select the position you want to name.

2 Press V/v repeatedly to select NAME
IN, then press or b. The cursor flashes and you can select a character.
3 Press V/v to select a character, then
press B/b to move the cursor to the next position. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character.
4 Adjusting the speaker levels

(TEST TONE)

You can adjust the speaker levels while listening to the test tone from your listening position.
Press V/v repeatedly to select AUTO xxx*.
The test tone is output from each speaker in sequence. * xxx represent a speaker channel. Note
Depending on the speaker pattern setting, test tone may not be output from all speakers even though you select AUTO xxx.
BD DVD SAT/ CATV TV VIDEO 1 VIDEO 2 SA-CD/ CD DMPORT TUNER
Adjust the speaker levels using the LEVEL menu so that the level of the test tone sounds the same from each speaker.
For details, see LEVEL menu (page 73). Tips
To adjust the level of all speakers at the same time, press MASTER VOL +/ (RM-AAP049 only) or 2 +/ (RM-AAP050 only). You can also use MASTER VOLUME on the receiver. The adjusted value are shown on the display during adjustment.

< < > M

Repeat steps 1 to 4 to select OFF.
You can also press any input buttons. The test tone turns off.
When a test tone is not output from the speakers
The speaker cords may not be connected securely. The speaker cords may have the short-circuit problem.
Press AMP MENU. Press V/v repeatedly to select <LEVEL>, then press or b. Press V/v repeatedly to select TEST TONE, then press.
When a test tone is output from a different speaker than the speaker indicator showed in the display
The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. Note
Test tone is not output from the headphones connected to the S-AIR surround amplifier.
Play back the source. Press MASTER VOL +/ (RM-AAP049 only) or +/ (RM-AAP050 only) to adjust the volume.
You can also use MASTER VOLUME on the receiver.

Playback

Press SOUND FIELD +/ to enjoy the surround sound.

Notes on sound fields

Depending on the speaker pattern settings, some sound fields may not be available. The sound fields for music and movie do not work in the following cases. Signals with a sampling frequency of more than 48 kHz are being received. Signals with more than 5.1 channel are being received (except PLIIz). You cannot select PLIIx and PLIIz at the same time. PLIIx is available only when the speaker pattern is set to a setting with surround back speaker(s). PLIIz is available only when the speaker pattern is set to a setting with front high speakers. The effects provided by the virtual speakers may cause increased noise in the playback signal. When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to LARGE in the SPEAKER menu. However, the sound will be output from the subwoofer if the digital input signal contains LFE signals, or if the front or surround speakers are set to SMALL, the sound field for movie is selected, or PORTABLE is selected. Tips
You can identify the encoding format of DVD software, etc., by looking at the logo on the package. Dolby Pro Logic IIx and Dolby Pro Logic IIz decoding are effective when multi channel signals are input. Sound fields with DCS marks use DCS technology. For details on Digital Cinema Sound (DCS), see Glossary (page 90).
When headphones are connected
You can only select the following sound fields if the headphones are connected to the receiver.
x HP 2CH (Headphones 2CH)
This mode is selected automatically if you use headphones (except Analog Direct). Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels except LFE signals. Note
When headphones are connected to the S-AIR surround amplifier, the sound field is automatically set to HP 2CH.
x HP DIRECT (Headphones Direct)
This mode is selected automatically if you use headphones when A. DIRECT is selected. Outputs the analog signals without processing by the equalizer, sound field, etc.

Minimizes TV volume

Outputs TV sound
You can also use the System Audio Control function as follows. If you turn on the receiver while the TV is turned on, the System Audio Control function will automatically be set to on and the TV sound will output from the speakers connected to the receiver. However, if you turn off the receiver, the sound will output from the TV speakers. When you adjust the TV volume, the receivers volume is adjusted simultaneously.
Turning off the receiver with the TV

(System Power Off)

When you turn the TV off by using the POWER button on the TVs remote, the receiver and the connected components turn off automatically. You can also use the receivers remote to turn off the TV.

AV ?/1

Enjoying movies with the optimum sound field
(Theatre/Theater Mode Sync)
Press THEATER or THEATRE on the remote of the receiver, TV, or the Blu-ray disc player, while pointing the remote toward the TV.
The sound field switches to C.ST.EX B. To return to the previous sound field, press THEATER or THEATRE again. Note
The sound field may not switch depending on the TV.
Press TV, then press AV ?/1.
The TV, receiver and the components connected via HDMI are turned off. Notes
Set the TV Standby Synchro to ON before using the System Power Off function. For details, refer to the operating instructions of the TV. Depending on the status, the connected components may not be turned off. For details, refer to the operating instructions of the connected components.
The sound field may be changed back to the previous one when you change the TVs input.
BRAVIA Sync Features 59GB
Enjoying the TV sound via an HDMI cable

(Audio Return Channel)

The Audio Return Channel (ARC) function enables the TV outputs the audio signals to the receiver via a HDMI cable connected to the HDMI TV OUT jack. You can enjoy the TV sound from the speakers connected to the receiver without connecting the TV AUDIO IN or TV OPTICAL jacks.

About S-AIR products

This receiver is compatible with the S-AIR function (page 93), which allows wireless sound transmission between S-AIR products. There are two types of S-AIR product. S-AIR main unit (this receiver): The S-AIR main unit is for transmitting sound. You can use up to 3 S-AIR main units. (The number of usable S-AIR main unit depends on the use environment.) S-AIR sub unit (not supplied): The S-AIR sub unit is for receiving sound. Surround amplifier: You can enjoy surround and surround back speakers sound wirelessly. For details, refer to the operating instructions supplied with the surround amplifier. S-AIR receiver: You can enjoy system sound in another room. These S-AIR products can be purchased as an option (the S-AIR product lineup differs depending on the area). See the notes or instructions for the S-AIR sub unit in this manual only when the S-AIR sub unit is used. Notes

Switching between digital and analog audio

(INPUT MODE)

When you connect components to both digital and analog input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch.
Enjoying the sound/ images from other inputs
You can reassign audio and/or video signals to another input when they are not currently being used. For example when you want to connect your DVD player but cannot find an unused input:

DVD player

Turn INPUT SELECTOR on the receiver to select the input.
You can also use the input buttons on the remote.
To OPTICAL BD IN jack (audio signal)
To COMPONENT VIDEO IN 1 jacks (video signal)
Press INPUT MODE repeatedly on the receiver to select the audio input mode.
The selected audio input mode appears on the display.

Receiver

Assign to DVD input jack using A. ASSIGN in AUDIO menu using V. ASSIGN in VIDEO menu
Press AMP MENU. Press V/v repeatedly to select <AUDIO> or <VIDEO>, then press or b. Press V/v repeatedly to select A. ASSIGN or V. ASSIGN, then press or b. Press V/v repeatedly to select the input name you want to assign (for example, DVD), then press or b. Press V/v repeatedly to select the input jack you want to assign to the input.

Audio input modes

x AUTO
Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected.

x ANALOG

Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Notes
Some audio input modes may not be set up depending on the input. When the Analog Direct function is selected, audio input is set to ANALOG automatically and you cannot select other modes. When HDMI 14 or DMPORT input is selected, ------ appears on the display, and you cannot select other modes. Select an input mode other than the HDMI 14 and DMPORT input, then set the audio input mode.
To return to the previous display

Press B.

Assigning input jacks
Assignable input jacks Input name VIDEO 1 a a a a a a a a* a a a a* VIDEO 2 a a a a a a a a* a a a a* BD a* a a a a a a a a* a a DVD a a* a a a a a a a a a* SAT/ CATV a a a* a a a a a a* a a SA-CD/ CD a a a a a a a a* a a a a*
COMPONENT1 COMPONENT2 COMPONENT3 HDMI1 HDMI2 HDMI3 HDMI4 COMPOSITE NONE

Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. COMP. STD is the standard setting, but it only enacts light compression. Therefore, we recommend using the COMP. MAX setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.

x TEST TONE

Lets you adjust the speaker levels while listening to the test tone from your listening position. OFF The test tone is turned off. AUTO xxx* The test tone is output from each speaker in sequence. * xxx represent a speaker channel.
Adjusting the speaker level
You can adjust each speakers level using the following parameters. For front left/right speakers, you can adjust the level from 10.0 dB to +10.0 dB in 0.5 dB steps. For other speakers, you can adjust the level from 20.0 dB to +10.0 dB in 0.5 dB steps.
x FL LEVEL x FR LEVEL x CNT LEVEL x SL LEVEL x SR LEVEL x SB LEVEL x SBL LEVEL x SBR LEVEL x LH LEVEL x RH LEVEL x SW LEVEL
Depending on the speaker pattern setting, some parameters may not be available.

Advanced Operations 77GB

SPEAKER menu
You can set the size and distance of the speakers connected to this receiver.

x SP PATTERN

Lets you set the number of speakers connected to this receiver. It should be synchronize with the speakers settings. For example:

5 / 2. 1

2 front + 2 front high + center 2 surround subwoofer

Speaker pattern

Front Front left/ left/right right high

Center

Surround Surround Surround Subwoofer left/right back left back right
5/2.1 5/2 4/2.1 4/2 3/4.1 3/4 2/4.1 2/4 3/3.1 3/3 2/3.1 2/3 3/2.1 3/2 2/2.1 2/2 3/0.1 3/0 2/0.1 2/0
a a a a a a a a a a a a a a a a a a a a

a a a a

a a a a a a a a a a
a a a a a a a a a a a a a a a a

a a a a a a a a

a a a a

a a a a a a a a a a

x FRT SIZE
LARGE If you connect large speakers that will effectively reproduce bass frequencies, select LARGE. Normally, select LARGE. However, if you have selected a speaker pattern without subwoofer, the front speakers are automatically set to LARGE. SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select SMALL to activate the bass redirection circuitry and output the front channel bass frequencies from the subwoofer. When the front speakers are set to SMALL, the center, surround and front high speakers are also automatically set to SMALL.

x CNT DIST.

Lets you set the distance from your listening position to the center speaker.

x SL DIST. x SR DIST.

Lets you set the distance from your listening position to the surround speakers.

x SB DIST. x SB ASSIGN

SPK B If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals, select SPK B. BI-AMP If you connect front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals using a bi-amplifier connection, select BI-AMP. OFF If you connect surround back speakers or front high speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select OFF. Note
When you change the connection from bi-amplifier or speaker front B to surround back or front high speakers connection, set SB ASSIGN to OFF, then perform the Auto Calibration again (page 37).

x SBL DIST. x SBR DIST.

Lets you set the distance from your listening position to the surround back speakers.

x LH DIST. x RH DIST.

Lets you set the distance from your listening position to the front high speakers.

x SW DIST.

Lets you set the distance from your listening position to the subwoofer. Notes
Depending on the speaker pattern setting. Some parameters may not be available. This function does not work in the following cases. Signals with a sampling frequency of more than 96 kHz are being received. Analog Direct is selected.

x DIST. UNIT

Lets you select the unit of measure for setting distances. METER The distance is displayed in meters. FEET The distance is displayed in feet.

x EFFECT

Lets you adjust the presence of the surround effect for the Cinema Studio EX A/B/C sound fields.

EQ menu

You can adjust the tonal quality (bass/treble level) of the front speakers.

x FRT CROSS

Lets you set the bass crossover frequency of the front speakers that have been set to SMALL in the SPEAKER menu.

x BASS x TREBLE

x CNT CROSS
Lets you set the bass crossover frequency of the center speaker that have been set to SMALL in the SPEAKER menu.

x SUR CROSS

Lets you set the bass crossover frequency of the surround speakers that have been set to SMALL in the SPEAKER menu.
You can also adjust the front speaker bass and treble level with TONE MODE and TONE +/ on the receiver.

x FH CROSS

Lets you set the bass crossover frequency of the front high speakers that have been set to SMALL in the SPEAKER menu.

TUNER menu

You can set the FM station receiving mode and name the preset stations.

SURROUND menu

You can select the sound field you want for your listening pleasure.

x Composite video

A standard format for transmitting video signal information. The luminance signal Y and chrominance signal C are combined and transmitted together.
x Deep Colour (Deep Color)
Video signals for which the color depth of signals passing through an HDMI jack have been raised. The number of colors that could be expressed by 1 pixel was 24 bits (16,777,216 colors) with the current HDMI jack. However, the number of colors which can be expressed by 1 pixel will be 36 bits, etc., when the receiver corresponds to Deep Colour (Deep Color). Since the gradation of the depth of a color can be expressed more finely with more bits, continuous color changes can be more smoothly expressed.
x Dolby Digital Surround EX
Acoustic technology developed by Dolby Laboratories, Inc. Surround back information is matrixed into regular left and right surround channels so that the sound can be reproduced in 6.1 channel. Active scenes, especially, are recreated with a more dynamic and realistic sound field.

x Dolby Pro Logic II

This technology converts 2 channel stereo recorded audio into 5.1 channel for playback. There is a MOVIE mode for movies and MUSIC mode for stereo sources such as music. Old movies encoded in the traditional stereo format can be enhanced with 5.1 channel surround sound.
x Digital Cinema Sound (DCS)
A unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful sound of movie theaters at home. With this Digital Cinema Sound developed by integrating a DSP (Digital Signal Processor) and measured data, the ideal sound field intended by filmmakers can be experienced at home.

x Dolby Pro Logic IIx

Technology for 7.1 channel (or 6.1 channel) playback. Along with audio encoded in Dolby Digital Surround EX, 5.1 channel Dolby Digital encoded audio can be reproduced in 7.1 channel (or 6.1 channel). Furthermore, existing stereo recorded content can also be reproduced in 7.1 channel (or 6.1 channel).

x Dolby Digital

Digital audio encoding/decoding technology developed by Dolby Laboratories, Inc. It consists of front (left/right), center, surround (left/right) and subwoofer channels. It is a designated audio standard for DVD video and also known as 5.1 channel surround. Since surround information is recorded and reproduced in stereo, more realistic sound with fuller presence is delivered than with Dolby surround.

x Dolby Pro Logic IIz

Dolby Pro Logic IIz brings a vertical aspect to the sound field through the addition of left and right front high speakers. It decodes nondirectional elements in the audio mix and reproduces them from the high speakers, giving an enhanced sense of depth and airiness to the sound field.
x Dolby Surround (Dolby Pro Logic)
Audio processing technology developed by Dolby Laboratories, Inc. Center and mono surround information is matrixed into two stereo channels. When reproduced, audio is decoded and output in 4 channel surround sound. This is the most common audio processing method for DVD video.

1) Measured

under the following conditions: Power requirements 230 V AC, 50 Hz 120 V AC, 60 Hz

Area code CEL, CEK U2

Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output.
Frequency response Analog 10 Hz 70 kHz, +0.5/2 dB (with sound field and equalizer bypassed) Input Analog Sensitivity: 500 mV/ 50 kohms S/N3): 96 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (analog) AUDIO OUT Voltage: 500 mV/ 10 kohms SUBWOOFER Voltage: 2 V/1 kohm Equalizer Gain levels 10 dB, 1 dB step

3) INPUT

Video section
Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through

General

Power requirements
Area code CEL, CEK U2 Power requirements 230 V AC, 50/60 Hz 120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT) DC OUT: 5V, 0.7 A MAX Power consumption
Area code CEL, CEK, U2 Power consumption 240 W
SHORT (with sound field and equalizer bypassed). 4) Weighted network, input level.

FM tuner section

Tuning range 87.5 MHz 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz

AM tuner section

Tuning range
Area code CEL, CEK U2 Tuning scale 10 kHz step 530 kHz 1,710 kHz 9 kHz step 531 kHz 1,602 kHz 531 kHz 1,710 kHz
Dimensions (width/height/depth) (Approx.) 430 mm 157.5 mm 322 mm (17 in 6 1/4 in 12 3/4 in) including projecting parts and controls Mass (Approx.) Models of area code CEL, CEK 8.2 kg (18 lb 2 oz) Models of area code U2 7.9 kg (17 lb 7 oz)
For details on the area code of the component you are using, see page 5. Design and specifications are subject to change without notice. Standby power consumption: 0.3 W Halogenated flame retardants are not used in the certain printed wiring boards.

 

Technical specifications

Full description

Take your HD surround sound experience to new heights with the STR-DH810 A/V receiver. Offering an abundance of connectivity options (4 HDMI, 3 component), you will have room for all your components including a Blu-ray player, PS3 system, DVD player and more. And with DVD upscaling via HDMI you can watch DVDs in near HD quality. This 7.1-channel receiver has LPCM, Dolby trueHD and dts-HD decoding technologies for audio that is true to the original master recording. The STR-DH810 features wireless second zone audio capabilities, which allows you transmit wireless audio in up to 10 additional rooms via optional S-AIR accessories. Additional features include audio return channel which eliminates the need for extra cables connected to your TV, and standby pass-through that lets you access all of your HDMI connected devices without having to power on the receiver.

General
Product TypeAV receiver
Width16.9 in
Depth6.2 in
Height12.7 in
Weight18.3 lbs
Audio System
Sound Output ModeSurround Sound
Built-in DecodersDolby Pro Logic, Dolby Pro Logic II, DTS Neo:6, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS 96/24, DTS decoder, Dolby Pro Logic IIx, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital EX
Surround Sound EffectsDigital Cinema Sound EX
Digital Sound Processor (DSP)Yes
DSP PresetsCinema Studio Ex. A, Cinema Studio Ex. B, Cinema Studio Ex. C
Surround System Class7.1 channel
Response Bandwidth10 - 70000 Hz
Amplifier Output Details110 Watt - 8 Ohm - at 1 kHz - THD 1.0% - 7 channel(s) ( surround )
TimerSleep
Bass ControlYes
Treble ControlYes
Additional FeaturesAuto sound calibration
Signal Processing Features
HDMI SwitchingYes
HDMI Pass-ThroughUp to 1080p
Video Conversion/ScalingAnalog to HDMI up conversion
Connectors
Headphone JackYes
Coaxial Digital InputYes
Optical Digital InputYes
Radio
TypeRadio tuner - AM/FM - digital
Preset Station Qty60 preset stations
AM Preset Station Qty30 preset stations
FM Preset Station Qty30 preset stations
Additional FeaturesStation naming
Remote Control
TypeUniversal remote control
Connections
Connector Type1 x headphones - front 4 x HDMI input ( 19 pin HDMI Type A ) - rear 1 x HDMI output ( 19 pin HDMI Type A ) - rear 2 x audio line-in ( RCA phono x 2 ) - rear 1 x composite video output ( RCA phono ) - rear 3 x composite video/audio input ( RCA phono x 3 ) - rear 1 x audio line-out ( RCA phono x 2 ) - rear 1 x subwoofer output ( RCA phono ) - rear 3 x component video input ( RCA phono x 3 ) - rear 1 x component video output ( RCA phono x 3 ) - rear 1 x Digital Media Port - rear 3 x SPDIF input ( TOSLINK ) - rear 1 x SPDIF input ( RCA phono ) - rear 1 x composite video/audio output ( RCA phono x 3 ) - rear 1 x composite video/audio input ( RCA phono x 3 ) - front
Miscellaneous
Included AccessoriesAuto calibration microphone
Power
Power DevicePower supply - internal
Power Consumption Operational240 Watt
Power Consumption Stand by / Sleep0.3 Watt
Universal Product Identifiers
BrandSony
Part NumberSTRDH810
GTIN00027242779969

 

Tags

4715Z MX300 IC-M34 Grundfos MQ ACS33 Asus P5E HT-BD2E I9000 AT-S24 Commander 2002 RZ1715 CP-40 ZWD1472W Director GCC-4480B ROC 3404 Cdmix1 LBP3000 XR-C5110R Conquer-renegade Turbo 400 Easy 160 Evolis Ranger-2002 MP150 TH-46PZ85E Troubleshooting PV-DV121D CQ-RD100 Color 2000 Finepix 2650 WF9700N3W EHT6435K EX-S770 MQ802-MQ1202-mq1602 SLS 538 WM2016CW Extensa 390 Cabriolet Singer 195K Master Dx4 ZGT1SEK-A Pursuit 2 795FT-FB795e-ep- AVR-886 ZR830 XM601 LRM1260SW Grabsterav400 KX25-KX49-kx61 HDC-HS700 Notebook 23 E UX-V10 32PF7520D PL-43A82T WD-J1255R GS-2200 MZ-B100 Studio 9 Phone EOS 1DS MF-JM53x8K DPL914VD 1000HD XP AW4416 Setup HT-S6305 A-9711 WF-S862 E1210 215 054 FAX-LAB 220 DS24205 Aspire-L320 GZ-MG57AG HP-2800G TL555C Watch F56 32PFL5522D 05 E-PC 42 BXR 100 Nuvi 705 Urc 8811 PD-D9-J Battlegrounds 6013BR Onis 300 Roland AX-1 Control R50 Shotgun DVD963SA-691 Synergy 1 Nibiru A7S266-VM XD1150 Siemens SL75 Yamaha ED10 PEG-NX80V TXL32S20B Biberon LW17M24C

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101