Sony TA-E2000ESD Manual
Sony TA-E2000esd Home Cinema Amplifier, size: 4.1 MB
Here you can find all about Sony TA-E2000ESD like manual and other informations. For example: review.
Sony TA-E2000ESD manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony TA-E2000ESD please write about it to help other people. [ Report abuse or wrong photo | Share your Sony TA-E2000ESD photo ]
User reviews and opinions
|loui||12:02pm on Monday, November 1st, 2010|
|very nice vintage|
|tacodog||8:05am on Sunday, October 10th, 2010|
|Sony-KDL32W5500U: Overall I am very pleased with this TV, which I use with a Humax Foxsat HDR (connected via HDMI). Simply Stunning Excellent TV.|
|cypher||6:22pm on Sunday, September 26th, 2010|
|The Sony KDL40W5500 accordingly costs a pretty penny although if you know where to go it can be had for a pretty reasonable cost compared to lesser ri... Sony are just about the top of the league when it comes to audovisual fare.|
|!_!b-gay-_||2:33pm on Saturday, August 21st, 2010|
|5 stars Only had the tv for a day but after hooking it up to the ps3 im blown away with the hd videos great quality and the sounds is amazing for buil...|
|rabbit||12:59am on Sunday, May 16th, 2010|
|Fantastic product Bought this item a month ago and thus far am extremely happy with it. The first thing to mention was the speed of delivery.|
|Peter Young||5:47pm on Thursday, May 13th, 2010|
|I bought this TV during the Easter sale after spending a few weeks researching the TVs available (looking for good value for money). We paid £399.|
|greycloack||7:23pm on Friday, April 23rd, 2010|
|I have just purchased a Sony KDL-32W5500 from 1staudiovisual.co.uk as after spending days trawling the net I was unable to beat their price. I will be a bit bias as i own this TV...its AMAZING. The sony Bravia series of televisions are without a doubt one of the best.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
5 Channel Power Amplifier
Operating Instructions Mode demploi
1998 by Sony Corporation
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
For the customers in United States
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and power amplifier. Connect the equipment into an outlet on a circuit different from that to which the power amplifier is connected. Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment.
The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. TA-N9000ES Serial No.
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
For the customers in Canada CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
About This Manual
The instructions in this manual are for model TA-N9000ES. Check your model number by looking at the lower right corner of the front panel. Conventions The following icon is used in this manual: z Indicates hints and tips for making the task easier.
TABLE OF CONTENTS
Hooking Up the Components 4
Unpacking 4 Normal Connections Using One Power Amplifier 6 Normal Connections Using Two Power Amplifiers 7 If You Already Have an Integrated Stereo Amplifier 8 Using the Power Amplifier with a Digital Signal Processor 9 BTL Connections Using Two Power Amplifiers 10 Control A1 Connections 11 Power Connections 11
Location of Parts and Basic Operations 12
Front Panel Parts Description 12
Additional Information 14
Precautions 14 Troubleshooting 15 Specifications 16
Hooking Up the Components
This chapter describes how to connect a Sony TA-E9000ES control amplifier, your speakers, and your other audio components to the power amplifier. Be sure to read this section before making any connections.
Check that you received the following items: Control A1 cable (1)
Before you get started
Turn off the power to all components before making any connections. Do not connect the AC power cords until all of the connections are completed. Be sure to make connections firmly to avoid hum and noise. When connecting an audio cord, be sure to match the color-coded pins to the appropriate jacks on the components: white (left) to white; and red (right) to red. When connecting the center channel, you can use either the red or white pins on the audio cord.
Notes on speaker system hookup
Twist the stripped ends of the speaker cords about 10 mm.
Selecting the speaker impedance
Hooking Up the Components Be sure to set the SPEAKER IMPEDANCE selector on the rear panel of the power amplifier to the top position when making normal connections to speakers with nominal impedance of 4 to 8 ohms, or when making BTL connections to speakers with nominal impedance of 8 to 16 ohms. Set the SPEAKER IMPEDANCE selector on the rear panel of the power amplifier to the bottom position when making normal connections to speakers with a nominal impedance greater than 8 ohms, or making BTL connections to speakers with a nominal impedance greater than 16 ohms. Setting the selector to the top position will decrease the power amplifiers maximum output.
Be sure to the power amplifier is turned off before you change the position of the SPEAKER IMPEDANCE selector.
This is a high output amplifier. Touching the stripped end of the speaker cords may result in injury. When connecting the speakers, be sure the stripped end of the speakers cord does not protrude from the speaker terminal.
Connect the right front and rear speakers to the FRONT and REAR SPEAKERS R terminals, connect the left front and rear speakers to the FRONT and REAR SPEAKERS L terminals. Be sure to match the speaker cord to the appropriate terminal on the components: + to + and to. If the cords are reversed, the sound will be distorted and will lack bass. If you use front speakers that have a low maximum input rating, adjust the volume of the control amplifier carefully to avoid producing excessive output from this unit that may be harmful to the speakers. To obtain a higher power output when using speakers with a nominal impedance greater than 8 ohms, connect the speakers using BTL connections. When making BTL connections, refer to BTL Connections Using Two Power Amplifiers on page 10 for details. Set the SPEAKER IMPEDANCE selector on the rear panel according to the type of speakers you are connecting. See Selecting the speaker impedance on this page for details. When making normal (non-BTL) connections to your speakers, be sure the OPERATION selector on the rear panel of the power amplifier is set to NORMAL. When making BTL connections, set to BTL.
Normal Connections Using One Power Amplifier
Be sure the OPERATION selector on the rear panel is set to NORMAL. If you have a separate two channel (stereo) amplifier that you would also like to use with the front speakers, connect it to the EXTRA 2 CH INPUT jacks. Hooking Up the Components
Right (R) Rear Speaker
Left (L) Rear Speaker
Right (R) Front Speaker
Left (L) Front Speaker
Set OPERATION to 5ch
5ch / BTL 2+1 ch 4ch / BTL 2ch 3ch 2ch WARM UP EXTRA 2ch / BTL EXTRA 2ch
(+) (+) NORMAL USE 4 MIN () () BTL USE 8 MIN NORMAL USE 8 MIN BTL USE 16 MIN
See page 5
To listen to the stereo control amplifier set OPERATION to EXTRA 2ch
CTRL A1 REAR CENTER
REAR SPEAKERS INPUT
FRONT EXTRA 2CH
Set to NORMAL
R L R L R L
Stereo Control Amplifier
CD player (etc.)
TA-E9000ES AV Control Amplifier
MONITOR AC OUTLET
AC-3 RF IN
OPTICAL COAXIAL IN IN
OPTICAL OPTICAL OPTICAL OUT IN IN
OPTICAL COAXIAL OPTICAL COAXIAL IN IN IN IN
CTRL S IN
IN IN IN REC OUT IN REC OUT IN IN IN IN REC OUT IN REC OUT IN REC OUT IN
FRONT REAR WOOFER
Normal Connections Using Two Power Amplifiers
Use one power amplifier for the front and center speakers, and one for the rear speakers. Be sure the OPERATION selector on the rear panel is set to NORMAL.
Right (R) Front Speaker } ]
Set OPERATION to 3ch
(+) NORMAL USE 4 MIN
BTL USE 8 MIN NORMAL USE 8 MIN BTL USE 16 MIN
REAR SPEAKERS S-LINK
Set OPERATION to 2ch
If You Already Have an Integrated Stereo Amplifier
Make the following connections if you would like to use your integrated stereo amplifier to power the front speakers and this unit to power the rear and center speakers. Be sure the OPERATION selector on the rear panel is set to NORMAL.
Set the volume control on your integrated stereo amplifier to the center position (roughly 12 oclock). Setting it to the MAX position may produce an audible noise.
Right (R) Rear Speaker } ] Left (L) Rear Speaker } ] } Center Speaker ] Right (R) Front Speaker } ] Left (L) Front Speaker } ]
(+) NORMAL USE 4 MIN BTL USE
NORMAL USE 8 MIN
BTL USE 16 MIN
Integrated stereo amplifier
R MAIN L
Using the Power Amplifier with a Digital Signal Processor
If necessary, you can use more than one power amplifier. For details regarding speaker connections, please refer to other pages.
(+) NORMAL USE 4 MIN BTL USE 8 MIN NORMAL USE 8 MIN BTL USE 16 MIN
Digital Signal Processor (SDP-EP9ES, etc.)
FRONT L REAR L CENTER
Control amplifier (TA-E2000ESD, etc.)
L AUDIO R FRONT REAR WOOFER CENTER
BTL Connections Using Two Power Amplifiers
Make the following connections if you need more power than provided by the normal connections. Use one power amplifier for the front and center speakers, and one for the rear speakers. Make BTL connections to the front and rear speakers.
Right (R) Front Speaker } ] Left (L) Front Speaker } ] } Center Speaker ]
Be sure the OPERATION selector on the rear panel is set to BTL. In addition, set the SPEAKER IMPEDANCE selector to the top position.
Right (R) Rear Speaker } ]
Left (L) Rear Speaker } ]
Set OPERATION to BTL 2 + 1ch
BTL 2 + 1ch
Set to BTL
Set OPERATION to BTL 2ch
When making BTL connections as shown in this illustration, the gain level on the TA-N9000ES center speaker output drops about 6 dB compared to the output of the other speakers. When this happens, raise the level of the center speaker on the TA-E9000ES and adjust the volume accordingly.
z If you also want to make BTL connections to the center speaker
Use three power amplifiers. Make BTL connections between the center speaker and the third power amplifier using one set of FRONT SPEAKERS terminals. When making these connections, you should also connect a commercially available short plug to the other (unused) FRONT SPEAKERS terminals.
Control A1 Connections
Use a CONTROL A1 cord (supplied) to connect the SLINK CTRL A1 jack on this unit to the S-LINK CTRL A1 jack on the TA-E9000ES AV Control Amplifier. When the TA-E9000ES AV Control Amplifier is set to standby mode, this unit will also switch to standby mode. If you are using more than one TA-N9000ES power amplifier, use additional CONTROL A1 cords to connect them in series. Refer to the operating instructions supplied with your TA-E9000ES AV Control Amplifier for details.
Before connecting the AC power cord of this control amplifier to a wall outlet: Connect the speakers. Connect this units AC power cord to a wall outlet.
We recommend that you connect this unit directly to a wall outlet. If you must use a multi-outlet tap, or extension cord, be sure to use one capable of handling high current (at least 10 A) or one designed for office use.
About the power cor d This units power plug has a mark ( ) on the ground blade to enable you to match polarity when making power connections and achieve high quality musical reproduction. Insert the marked blade of the power plug into the side of the outlet with the larger opening (the grounded side).
TA-N9000ES (2nd) grounded side
ground mark ( ) TA-N9000ES (1st)
AV Control Amplifier TA-E9000ES
Location of Parts and Basic Operations
This chapter explain the names and basic operations of the buttons and controls located on the front panel.
Front Panel Parts Description
1 U switch Press to turn the power amplifier on and off. STANDBY indicator Blinks momentarily after U is pressed to turn the unit on, then goes out to indicate that the unit is ready. If you make Control A1 connections between the power amplifier and the TA-E9000ES AV Control Amplifier, this indicator lights red when control amplifier is set to standby mode.
BTL 2ch BTL 2+1ch
BTL EXTRA 2ch
2 Operation indicators Light to indicate the operation mode selected with the OPERATION control. Blink if you select a mode that cannot be used. 3 OPERATION control Turn to select the channels you want to use. When the OPERATION selector on the rear panel is set to NORMAL Position
2ch 3ch 4ch 5ch EXTRA 2ch
When the OPERATION selector on the rear panel is set to BTL Position
Signals input to the FRONT or REAR INPUT jacks are output from the FRONT (L/R) BTL speaker connections. Signals input to the FRONT or REAR INPUT jacks are output from the FRONT (L/R) BTL speaker connections. Signals input to the CENTER INPUT jacks are output from the CENTER SPEAKER jacks. Signals input to the EXTRA 2ch INPUT jacks are output from the FRONT (L/R) BTL speaker connections.
BTL 2ch + 1ch*
FRONT (L/R) FRONT (L/R) + CENTER FRONT (L/R) + REAR (L/R) FRONT (L/R) + CENTER + REAR (L/R) Signals input to the EXTRA 2ch INPUT jacks are output from the FRONT (L/R) speakers. BTL EXTRA 2ch
WARM UP Set OPERATION to this position (instead of turning the power off) to keep the circuitry warm when the power amplifier is not being used. This enables you to enjoy excellent sound quality immediately the next time you use the power amplifier. The warm up mode works the same during both NORMAL and BTL operation.
* When OPERATION is in this position and a center speaker is connected, the center speaker gain level drops about 6 dB. When this happens, raise the level of the center speaker on the AV control amplifier (TA-E9000ES, etc.) connected to this amplifier and adjust the volume accordingly.
Should any solid object or liquid fall into the cabinet, unplug the power amplifier and have it checked by qualified personnel before operating it any further.
On power sources
Before operating the power amplifier, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the power amplifier. If you are not going to use the power amplifier for a long time, be sure to disconnect the power amplifier from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. AC power cord must be changed only at the qualified service shop.
Place the power amplifier in a location with adequate ventilation to prevent heat buildup and prolong the life of the power amplifier. Do not place the power amplifier near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions. Do not place the power amplifier: Any place that is not level or unstable. On top of a carpet or blanket. In an extremely cold place. Near a television or video deck. (If used near a television or video deck, you may experience noise in the audio and/or video signals. The possibility of such interference greatly increases when using an indoor TV antenna. We recommend always using an external TV antenna.) Although this is a rationally designed 5 channel power amplifier, it does emit an extremely large amount of heat. Therefore, do not place anything on top of this unit. Also, when using several of these units together with high power connections, do not stack them directly on top of one another. Either place each one on an individual shelf of a rack, or place them side by side horizontally.
On heat emission during use
This unit will become very hot during use. This is not a malfunction. The top, sides, and rear of the cabinet will become quite hot, especially when playing at high volumes. In such cases, do not touch the cabinet. Touching the cabinet may cause physical injury or fire. In addition, do not use this unit in a completely enclosed cabinet. Place it in a well ventilated location to prevent an excessive rise in temperature. If you experience any of the following difficulties while using the power amplifier, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Theres no sound or only a very low-level sound is heard. / Check that the speakers and components are connected securely. / Make sure that all connections have been made securely. / Make sure that you have selected the correct component on the control amplifier. / Make sure the SPEAKER IMPEDANCE selector is set correctly. / During normal operation, make sure the OPERATION switch on the rear panel is set to NORMAL. During BTL operation, set it to BTL. / The protective device on the power amplifier has been activated because of a short circuit. Turn off the power amplifier, eliminate the short-circuit problem and turn on the power again. The left and right sounds are unbalanced or reversed. / Check that the speakers and components are connected correctly and securely. / Make sure all connections are made with the correct polarity (+ and ). / Use the test tone feature on the control amplifier to make sure that sound is being emitted correctly from all speakers. Severe hum or noise is heard. / Check that the speakers and components are connected securely. / Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from a TV set or fluorescent light. / Move your TV away from the audio components. / The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
Before connecting other components, be sure to turn off and unplug the power amplifier.
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your power amplifier, please consult your nearest Sony dealer.
AUDIO POWER SPECIFICATIONS General
System Pure-complementary High Power Legato Linear SEPP
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 120 watts per channel minimum RMS power, with no more than 0.03% total harmonic distortion from 250 milliwatts to rated output (USA model only).
Power requirements 120 V AC, 60Hz Power consumption 4.5 A Dimensions 7/7/8 in. (430 173.mm) including projecting parts and controls
C71840I Bouygues Astro 1993 Kurzweil PC2R Trafic System Gigaset C1 WD-12336AD D4160 Bizhub C280 Dimension 4700 Mini J7 KDL-26U2000 Hiphone Aspire 1680 DEH-433R N79-1 R52WM24 Edition Rs 550 Pioneer A-C5 IC-F210 IWD 7145 Psaa9 MH-60 WS2357 KD-NX901 NAV360 Classic KM300 EWS88MT CN3102PRO MH026fwea Nakamichi 480 Cable FIC AZ31 DMR-ES10P 860IS GE29878 Dect6800 Rm-rk50 FC504W1 SE-205 1400C TA-RW311 MC-E4013 Xone 464 DEH-P2500RB LD-12AW2 MP-C7055 Ciclopuls CP23 107T60 WF-S1051TP AS18FCN Optimus Wireless DCR-HC15 SLV-SE730N 3226-tlmb Cleaner Aficio 615C DCR-PC115 Messenger RDR-VX500 HT-SS370 Server Spyder Hdrv200F Review AVR 132 Revio C2 12 0 CX200 Scangear F5D5131-5-QIG Classic Cluedo 4 0 DS-40 Rsdx-02 MS-7529 Lugf02-90-W Hdchs100 XE-A201 21FJ4A-LD CD-BTB200 AH-2B Legend Bizhub 501 130FG-M MD 5275 P4VP-MX AY62 Ay82 DGS-3324SR Nokia 6288 RR-US750 282 K9 Gigaset C470 ESF473 Q1435 24-5H
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101