TCS-100DV

Pressman Portable Cassette Recorder
STEREO RECORDING WITH BUILT-IN STEREO FLAT MIC STEREO PLAYBACK WITH SUPPLIED HEADPHONE AUTO REVERSE VOICE OPERATED RECORDING (VOR) DOUBLE RECORDING TIME EASY SEARCH FUNCTION REMOTE CONTROL FEATHER TOUCH CONTROLS LCD DISPLAY STEP-UP FEATURE NEW FEATURE

TCS-100DV features

STEREO RECORDING WITH BUILT-IN STEREO FLAT MIC provides distinct

specifications

RECORDING SYSTEM: 2 Track, 2 Channel (standard cassette) FREQUENCY RESPONSE: 250 - 6300Hz SPEAKER: 1 716" (36mm) dia. POWER REQUIREMENTS: DC 3V with "AA" x 2 batteries BATTERY LIFE: Rec/Play: Approx. 11 hours with Sony alkaline batteries COLOR: Silver DIMENSIONS (WHD): x x 3" (108 x 28.5 x 76mm) WEIGHT: 7.4 oz (209g) SUPPLIED ACCESSORIES: Headphones with remote, carrying pouch, handstrap OPTIONAL ACCESSORIES: AC-E15HG (AC power adaptor), ECM-717 (stereo
placement of voices for more realism when listening to playback of meetings and lectures, and also may be used for music recording and playback of stereo music cassettes.
STEREO PLAYBACK WITH SUPPLIED HEADPHONE AUTO REVERSE provides uninterrupted recording and playback of both
cassette sides, with no need to turn tape over
VOICE OPERATED RECORDING (VOR) activates the recorder only when
audible sound is present, conserving tape and eliminating soundless passages
DOUBLE RECORDING TIME gives you the option of recording on a

microphone)

standard cassette at either normal speed or half the normal speed, for extended recording or dictation sessions
EASY SEARCH FUNCTION allows easy Rewind or Fast Forward of a few
2002 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. Sony and Pressman are trademarks of Sony. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate.
seconds to find a specific location for playback

REMOTE CONTROL

FEATHER TOUCH CONTROLS are sensitive and logic-controlled for very
fast, very easy operation
LCD DISPLAY clearly illustrates tape counter and battery level
Sony Electronics Inc 1 Sony Drive, Park Ridge, New Jersey 07656 www.sony.com

Printed in USA 2/2002

To lock the unit

Slide HOLD on the Cassette-Corder in the direction of the arrow. The - indicator appears in the display window. Disappears when the tab for the upper side is removed. Disappears when the tab for the reverse side is removed. Flashes if you try to slide REC with the cassette tab removed.
Deslice HOLD de la unidad en sentido opuesto al de la flecha. El indicador - desaparecer del visualizador.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

BGetting Started

Para bloquear la unidad
Deslice HOLD de la unidad en el sentido de la flecha. En el visualizador aparecer el indicador -.

BPreparativos

Preparing a Power Source
Choose one of the two following power sources.
When you use the supplied remote control
To release the HOLD function: slide HOLD in the reverse direction of the arrow. To lock the unit: slide HOLD in the direction of the arrow.
Dry Batteries (see Fig. A)

BOperating the Unit

Preparacin de una fuente de alimentacin
Elija una de las dos fuentes de alimentacin siguientes.
Cuando utilice el controlador remoto suministrado
Para desactivar la funcin de bloqueo (HOLD): Deslice HOLD en sentido contrario al de la flecha. Para bloquear la unidad: Deslice HOLD en el sentido de la flecha.
Desaparecer cuando haya quite la lengeta para la cara superior.
Open the battery compartment lid by sliding it in the direction of the arrow. Insert two size AAA (R03) dry batteries (supplied with the Sony world model only) with correct polarity. Close the lid.

BUtilizacin de la unidad

Desaparecer quite la lengeta para la cara posterior. Parpadear si trata de deslizar REC con la lengeta del casete quitada.

Recording

(see Fig. D)
To select the side to be recorded
To record on both sides continuously: Start recording on the upper side (FWD N appears in the display window). If n REV is displayed, press x STOP for more than 2 seconds during stop. When recording ends on the upper side, it will automatically continue on the reverse side. To record on one side only: Start recording on the reverse side (n REV appears in the display window). If FWD N is displayed, press x STOP for more than 2 seconds during stop. When recording ends on the reverse side, it will automatically stop.

BInformacin adicional

Troubleshooting
Should any problem persist after you have made these checks, consult your nearest Sony dealer.

Solucin de problemas

Si cualquier problema persiste despus de haber realizado estas comprobaciones, consulte a su proveedor Sony. La unidad no funciona. m Las pilas estn insertadas con la polaridad incorrecta. m Las pilas estn dbiles. m Ha presionado X PAUSE. m El adaptador de alimentacin de CA no est firmemente conectado. m Las pilas estn insertadas, pero el adaptador de alimentacin de CA est conectado a la unidad y no enchufado en un tomacorriente de la red. El altavoz no emite sonido. m Los auriculares estn enchufados. m El volumen est completamente al mnimo. La velocidad es demasiado rpida o lenta en el modo de reproduccin. m CONTROL SPEED est en un punto que no es el central. m Ajuste inapropiado del selector REC TIME. Ajstelo a la misma velocidad que la utilizada para grabar. El sonido se corta o se oye con excesivo ruido. m El volumen est completamente al mnimo. m Las pilas estn dbiles. m Las cabezas estn sucias. Consulte Mantenimiento. No es posible grabar. m El casete carece de lengeta. m La conexin es incorrecta. m Las pilas estn dbiles. m La cabeza grabadora/reproductora est sucia. m MIC SENS est en la posicin incorrecta al utilizar la funcin VOR. La grabacin se interrumpe. m VOR est en ON. Cuando no desee utilizar la funcin VOR, pngalo en OFF. m MIC SENS est inadecuadamente ajustado al utilizar la funcin VOR. La grabacin no puede borrarse completamente. m La cabeza borradora est sucia. m Ha grabado o est borrando una cinta de posicin alta (TYPE II) o de metal (TYPE IV).
FF/CUE REW/REVIEW x STOP MIC SENS VOR nN PLAY/DIR
Display window Visualizador i/remote i/Controlador remoto REC indicator Indicador REC
When the playback starts from the upper side (FWD N appears in the display window), playback goes on to the reverse side (n REV appears in the display window), and the unit turns off automatically.
Start recording during playback
Slide REC in the direction of the arrow with the middle button pressed during playback, and recording starts immediately. It is useful when you want to re-record the part just recorded.
The unit does not operate.
m m m m m m m m m m m m m m m m m m m m m The batteries have been inserted with incorrect polarity. The batteries are weak. X PAUSE is pressed. The AC power adaptor is not firmly connected. The batteries have been inserted; however, the AC power adaptor is also connected to the unit but not plugged into the wall outlet. The headphones are plugged in. The volume is turned down completely. SPEED CONTROL is set at a point other than the middle. Improper setting of the REC TIME switch. Set it to the same speed as that used for recording. The volume is turned down completely. The batteries are weak. The heads are dirty. See Maintenance. The tab on the tape has been removed. Connection is made incorrectly. The batteries are weak. The record/playback head is dirty. MiIC SENS has been set to the improper position when the VOR function works. VOR is set to ON. When you do not use VOR, set it to OFF. MIC SENS is set improperly when using VOR. The erase head is dirty. Recording or erasing is being made using a recorded High Position (TYPE II) or metal (TYPE IV) tape.