Sony Trinitron KV-2780R Manual
Sony Trinitron KV-2780R, size: 1.6 MB
Here you can find all about Sony Trinitron KV-2780R like manual and other informations. For example: review.
Sony Trinitron KV-2780R manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony Trinitron KV-2780R please write about it to help other people. [ Report abuse or wrong photo | Share your Sony Trinitron KV-2780R photo ]
User reviews and opinions
|bkoti||7:40pm on Friday, September 24th, 2010|
|Input selection, including component and memory stick, picture quality, sound. VERY heavy, 167 pounds and front heavy from the thick glass used!|
|watsoncj||10:49am on Monday, June 21st, 2010|
|Maybe you want excellent picture quality without the investment of HDTV or something easy to setup and use, either way this is the TV for you!|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains.
Never push objects of any kind into the set as this could result in a re or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. Have it checked immediately by qualied personnel.
Do not open the cabinet and the rear cover of the TV. Refer to qualied service personnel only.
For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms.
To prevent re or shock hazard, do not expose the TV to rain or moisture.
Do not cover the ventilation openings of the TV For ventilation, leave a space of at least 10cm all around the set.
Never place the TV in hot, humid To prevent re, keep inammable objects or naked lights (eg or excessively dusty places. Do not install the TV where it may be candles) away from the TV. exposed to mechanical vibrations.
Clean the TV with a soft, lightly dampened cloth. Do not use benzine, thinner or any other chemicals to clean the TV. Do not scratch the TV screen. As a safety precaution, unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not pull on the power lead itself.
Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV.
Place the TV on a secure stable stand. Do not allow children to climb on to it. Do not place the TV on its side or face up.
Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualied service personnel.
Do not cover the ventilation openings of the TV with items such as curtains or newspapers etc.
Overview of Remote Control Buttons
! 3 ! ! ! ! 8 ! ! 9 ! ! 1 To Temporarily Switch Off TV: Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. 2 Selecting input source: Press this button repeatedly until the desired input symbol of the source appears on the TV screen. 3 Selecting channels: If Media Selector is switched to TV or VCR, press this button to select channels. For double-digit programme numbers, enter the second digit within 2.5 seconds. 4 a) If Media Selector is switched to TV: Press this button to watch the last channel selected (watched for at least 5 seconds). b) If Media Selector is switched to VCR: For Sonys VCR double-digit programme numbers, e.g. 23, press -/- first and then the buttons 2 and 3. 5 This button only works in Teletext mode. ! 6 Selecting screen format: Press this button repeatedly to change the format of the screen. For more details refer to chapter Auto Format on page 14. 7 Selecting Teletext: Press this button to switch on teletext. 8 a) If Media Selector is switched to TV: When MENU is switched on, use these buttons to operate the menu system. For details refer to Introducing and Using the Menu System on page 9. When MENU is switched off, press OK to show a channel overview. Then press or to select the channel and then press again the OK button to watch the selected channel. b) If Media Selector is switched to VCR or DVD: Using these buttons you can control the main functions of your VCR or DVD. 9 Recording button: If Media Selector is switched on VCR, press this button to record programmes. ! Media Selector: With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function. Before the first time you want to control a DVD or VCR by using this remote control, you have to set it up depending on the brand of the device to be used. For more details, refer to chapter Remote Control Configuration for VCR or DVD on page 20. ! Selecting channels: Press this button to select the next or previous broadcast channel. ! Muting the Sound: Press this button to mute TV sound. Press again to restore the sound. ! Adjusting TV volume: Press this button to adjust the volume of the TV. ! Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen. ! Selecting TV mode: Press this button to switch off teletext or video input. ! Selecting Sound effect: Press this button repeatedly to change the sound effect. ! Selecting Picture mode: Press this button repeatedly to change the picture mode. ! Displaying on Screen information: Press this button to display all on-screen indications. Press again to cancel. ! VCR or DVD on/off: Press this button to switch your VCR or DVD on or off. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to Teletext section of this instruction manual. Overview
Overview of TV Buttons
Programme Up or Down Buttons (Selects TV channels) Volume control buttons Press on the mark on the door flap to reveal the control panel. Selecting Input source Video Input jack Auto Start Up Button S video Input jack
Audio Input jacks
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
Connecting cables are not supplied.
Scart lead is optional. For more details of VCR connection, please refer to the section Connecting Optional Equipment of this instruction manual.
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) adjust the picture slant 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on the TV set.
1 Connect the TV plug to the mains socket (220-240V AC,
50Hz) The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.
2 Press the
or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
i4 Svenska Norsk English Nederlands Franais Italiano i$
3 The Country menu appears automatically on the TV
screen. Press the or button to select the country in which you will operate the TV set, then press the OK button to confirm your selection. If the country in which you want to use the TV set does not appear in the list, select - instead of a country. In order to avoid wrong teletext characters for Cyrillic languages we recommend to select Russia country in the case that your own country does not appear in the list.
Country i4 Sverige Norge Italia Deutschland sterreich i$ Select country:
4 Because of the earths magnetism, the picture might slant.
The Picture Rotation menu allows you to correct the picture slant if it is necessary.
If picture slants, please adjust picture rotation Not necessary Adjust now
a) If it is not necessary, press
necessary and press OK.
to select Not
b) If it is necessary, press
or to select Adjust now, then press OK and correct any slant of the picture between 5 and +5 by pressing or. Finally press OK to store. continued.
5 The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
Do you want to start automatic tuning? Yes No
6 The TV starts to automatically search and store all
available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the or button and OK to store the channels. If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 6) and press OK. The auto tuning process will start again.
Auto Tuning Programme: System: Channel: Searching. 01 B/G C21
No channel found Please connect aerial Confirm
After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
Programme Sorting Programme: 01 TVE 02 TVETVCCC58 Select channel: Exit: MENU
a) If you wish to keep the broadcast channels in the
tuned order, go to step 8.
b) If you wish to store the channels in a different order:
1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press. 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels.
Programme Sorting Programme: 01 TVE 02 TVETVCCC58
Select new position: Exit: MENU
8 Press the MENU button to remove the menu from the
Your TV is now ready for use
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on.
2 To highlight the desired menu or option, press
To enter to the selected menu or option, press To return to the last menu or option, press.
/ / or.
To alter settings of your selected option, press To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
Picture Adjustment Mode: Personal Contrast Brightness Colour Sharpness Hue Reset
Level 3 / Function
PICTURE ADJUSTMENT The Picture Adjustment menu allows you to alter the picture adjustments. To do this: after selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture mode based on the programme you are watching: Live (for live broadcast programmes, DVD and Digital Set Top Box receivers). Personal (for individual settings). Movie (for films).
Brightness, Colour and Sharpness can only be altered if Personal mode is selected. Hue is only available for NTSC colour signal (e.g: USA video tapes). Select Reset and press OK to reset the picture to the factory preset levels.
SOUND ADJUSTMENT The Sound Adjustment menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press. Then press repeatedly / / or to adjust it and finally press OK to store the new adjustment.
Sound Adjustment Effect: Natural Treble Bass Balance Reset Dual Sound: Mono Auto volume: On
Enhances clarity, detail and presence of sound by using BBE High Definition Sound system*. Dynamic: BBE High Definition Sound system* intensifies clarity and presence of sound for better intelligibility and musical realism. Dolby**Virtual: Simulates the sound effect of Dolby Surround Pro Logic. Natural: Off: Flat response. More More Right
Treble Bass Balance Reset Dual Sound
Less Less Left
Resets the sound to the factory preset levels.
For a stereo broadcast:
Mono. Stereo. For a bilingual broadcast: Mono (for mono channel if available). A (for channel 1). B (for channel 2). Off: volume level changes according to the broadcast signal. On: volume level of the channels will stay the same, independent of the broadcast signal (e.g. in the case of advertisements).
If you are listening to the TV through headphones, the Effect option will automatically be switched to Off. If you select Dolby Virtual on the Effect option, the Auto Volume option will automatically be switched to Off and vice versa.
* The BBE High Definition Sound system is manufactured by Sony Corporation under license
from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word BBE and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create the Dolby Surround sound effect by simulating the sound
of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external amplifier (for details refer to Connecting to external audio Equipment on page 19).
**Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories. continued.
SLEEP TIMER The Sleep Timer option in the Timer menu allows you to select a time period for the TV to switch itself automatically into the standby mode.
Timer Sleep Timer: Off
To do this: after selecting the option press , then press or to set the time period delay (max. of 4 hours). While watching the TV, you can press the button on the remote control to display the time remaining. One minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
LANGUAGE / COUNTRY The Language/Country option in the Set Up menu allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set.
Set Up Language/Country Auto Tuning Programme Sorting Progamme Labels AV Preset Manual Programme Preset Detail Set Up
To do this: after selecting the option, press and then proceed in the same way as in the steps 2 and 3 of the section Switching On the TV and Automatically Tuning on page 7.
AUTO TUNING The Auto Tuning option in the Set Up menu allows you to automatically search for and store all available TV channels. To do this: after selecting the option, press and then proceed in the same way as in the steps 5 and 6 of the section Switching On the TV and Automatically Tuning on page 8.
PROGRAMME SORTING The Programme Sorting option in the Set Up menu allows you to change the order in which the channels (TV Broadcast) appear on the screen.
To do this: after selecting the option, press and then proceed in the same way as in step 7 b) of the section Switching On the TV and Automatically Tuning on page 8.
PROGRAMME LABELS The Programme Labels option in the Set Up menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name. 2 Press. With the first element of the Label column highlighted, press or to select a letter or number (select - for a blank), then press to confirm this character. Select the other four characters in the same way. Finally press OK to store. AV PRESET The AV Preset option in the Set Up menu allows you to designate a name to the external equipment you have connected to the input sockets of this TV. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1, AV2 and AV3 are for the rear Scarts and AV4 for side connectors). Then press. 2 A label automatically appears in the label column: a) If you want to use one of the 6 predefined label (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. b) If you want to set a different label, select Edit and press. Then with the first element highlighted, press or to select a letter, number or - for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. continued.
MANUAL PROGRAMME PRESET The Manual Programme Preset option in the Set Up menu allows you to: a) Preset channels or the VCR channel one by one to the programme order of your choice. To do this: Set Up Set Up 1 After selecting the Manual Programme Language/Country Language/Country Auto Tuning Auto Tuning Preset option, press then with Programme Sorting Programme Sorting Progamme Labels Progamme Labels AV Preset AV Preset Programme option highlighted press. Manual Programme Preset Manual Programme Preset Detail Set Up Detail Set Up Press or to select on which programme number you want to preset the channel (for VCR, select programme number 0). Then press. 2 The following option is only available depending on the country you have selected in the Language/Country menu. After selecting the System option, press. Then press or to select the TV Broadcast system (B/G for western European countries, D/K for eastern European countries, L for France or I for United Kingdom). Then press. 3 After selecting the Channel option, press. Then press or to select the channel tuning (C for terrestrial channels or S for cable channels). Next press. After that, press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. b) Label a channel using up to five characters. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to to name appears on the screen, select the Label option and press. Next press or select a letter, number or - for a blank. Press to confirm this character. Select the other four characters in the same way. After selecting all the characters, press OK twice to store. c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press. Next press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store. d) Skip any unwanted programme numbers when they are selected with the PROG +/buttons. To do this: Highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press. Next press or to select Yes. Finally press OK twice to confirm and store. To cancel this function afterwards, select No instead of Yes in the step above. e) View and record scrambled channels when using a decoder connected to Scart 3/ S 3 directly or through a VCR. This option is only available depending on the country you have selected in the Language/Country menu. To do this: select the Decoder option and press. Next press or to select On. Finally press OK twice to confirm and store. To cancel this function afterwards, select Off instead of On in the step above. continued.
AUTO FORMAT The Auto Format option in the Detail Set Up menu allows you to automatically change the aspect ratio of the screen. To do this: after selecting the option, press. Then press or to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Finally press OK to store.
Detail Set Up Auto Format: Noise Reduction: AV3 Output: TV Speakers: RGB Centring: Picture Rotation: On Auto TV On 0 0
Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control to select one of the following formats: Smart: Imitation of wide screen effect for 4:3 broadcast. 4:3: 14:9: Conventional 4:3 picture size, full picture information. Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies. Wide: For 16:9 broadcast. Full picture information
In Smart, Zoom and 14:9 modes, parts of the top and bottom of the screen are cut off. Press or to adjust the position of the image on the screen (e.g. to read subtitles).
NOISE REDUCTION The Noise Reduction option in the Detail Set Up menu allows you to automatically reduce the picture noise visible in the broadcast signal.
To do this: after selecting the option, press Then press or to select Auto. Finally press OK to confirm and store. To cancel this function afterwards, select Off instead of Auto in the step above.
AV3 OUTPUT The AV3 Output option in the Detail Set Up menu allows you to select the source to be output from the Scart connector 3/ S 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connectors 1/ 1 or 2/ 2 or side connectors S 4 or 4 and 4. If your VCR supports Smartlink, this procedure is not necessary. To do this: after selecting the option, press Then press or to select the desired output signal: TV, AV1, AV2, AV4, YC4 or AUTO.
If you select AUTO, the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the AV3 Output to AUTO or TV for correct unscrambling.
TV SPEAKERS The TV Speakers option in the Detail Set Up menu allows you to mute the TV speakers in order to listen to the TV from an external amplifier connected to the audio outputs on the rear of the TV set.
To do this: after selecting the option, press Then press or to select Off. Finally press OK to confirm and store. To cancel this function afterwards, select On instead of Off in the step above. RGB CENTRING When connecting an RGB source, such as a PlayStation, you may need to readjust the horizontal position of the picture. If this is the case, you can readjust it through the RGB Centring option in the Detail Set Up.
To do this: while watching an RGB source select the RGB Centring option and press. Then press or to adjust the centre of the picture between 10 and +10. Finally press OK to confirm and store.
PICTURE ROTATION Because of the earths magnetism, the picture might slant. If this is the case, you can correct the pictures slant by using the Picture Rotation option in the Detail Set Up menu.
To do this: after selecting the option, press. Then press or to correct any slant of the picture between -5 and +5.
Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below. Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal. To switch on Teletext : After selecting the TV channel which carries the teletext service you wish to view, press.
Index Programme News Sport Weather 25 153
To select a Teletext page: 98 Input 3 digits for the page number, using the numbered buttons. If you make a mistake, retype the correct page number. If the counter on the screen continues searching, it is because the page is not available. If this is the case, input another page number To access the next or preceding page: Press PROG + ( ) or PROG - ( ). To superimpose teletext on to the TV: Whilst you are viewing teletext, press
. Press it again to cancel teletext mode.
To freeze a teletext page: Press /. Press it again to cancel the freeze. To reveal concealed information (e.g: answer to a quiz): Press /. Press it again to conceal the information. To select a sub page: A teletext page may consist of several sub pages. In this case the page number that appears on the upper left corner will become from white to green and one or more arrows will appear next to the page number. Repeatedly press or buttons on the remote control to watch the desired sub page. To Switch Off Teletext: Press.
Fastext service lets you access Teletext pages with one button push. When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow or blue) to access the page corresponding to your menu choice.
Connecting Optional Equipment
Using the following instructions you can connect a wide range of optional equipment to your TV set. (Connecting cables are not supplied).
S VHS/Hi8 DVC camcorder
8mm/Hi8/ DVC camcorder
A B C D E
G VCR F
When you connect the headphones, the TV speakers will automatically be muted.
* PlayStation is a product of Sony
Computer Entertainment, Inc.
* PlayStation is a trademark of Sony
To avoid picture distortion, do not connect external equipment to connectors A and B at the same time. Do not connect a Decoder to the Scart F. Games that use a GUN attachment to point at the screen do not work correctly due to 100Hz technology used in this television.
Connecting a VCR:
To connect a VCR, please refer to the section Connecting the aerial and VCR of this instruction manual. We recommend you connect your VCR using a scart lead. If you do not have a scart lead, tune in the VCR test signal to the TV programme number 0 by using the Manual Programme Preset option. (for details of how to manually programme these presets, see page 13, step a). Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR that supports Smartlink:
Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please refer to the instruction manual of your VCR. If you use a VCR that supports Smartlink, please connect the VCR to the TV using a Scart lead to the Scart 3/ S 3 G.
If you have connected a decoder to the Scart VCR connected to this Scart:
3 G or through a
Select the Manual Programme Preset option in the Set Up menu and after entering in the Decoder** option, select On (by using or ). Repeat this option for each scrambled signal.
**This option is only available depending on the country you have selected in the
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio output from TV. Next , using the menu system, select the Set Up menu, enter the Detail Set Up menu and set TV Speakers to Off. Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the Sound Adjustment menu. To enjoy Dolby Virtual sound effect through your Hi-Fi equipment: Place the speakers of your equipment in front of your listening position and beside the TV set but keeping a distance of 50 cm between each speaker and the TV set. Then by using the menu system, select the menu Sound Adjustment. Next select Dolby Virtual on the Effect option.
Left Hi-Fi speaker Right Hi-Fi speaker
Using Optional Equipment
Connect your equipment to the designated TV socket, as indicated in the previous page. Switch on the connected equipment. To watch the picture of the connected equipment, press the correct input symbol appears on the screen. Symbol Input Signals Audio / video input signal through the Scart connector E RGB input signal through the Scart connector E. This symbol appears only if an RGB source has been connected. Audio / video input signal through the Scart connector F. RGB input signal through the Scart connector F. This symbol appears only if an RGB source has been connected. Audio/video input signal through the Scart connector G. S Video Input signal through the Scart connector G. This symbol appears only if an S Video source has been connected. Video input signal through the phono socket B and Audio input signal through C. S Video Input signal through the front S Video input jack A and Audio signal through C. This symbol appears only if an S Video source has been connected. button on the remote control to return to the normal TV picture. button repeatedly until the
Your sitting position
For Mono Equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or S 4 input signal using the instructions above. Finally, refer to the Sound Adjustment section of this manual and select Dual Sound A on the sound menu screen.
Remote Control Configuration for VCR/DVD
In its default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To control other VCRs and DVDs of other manufacturers (and some Sony VCR models), please complete the following steps: Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have more than one code, enter the first code number. Sony will endeavour to update the software according to market changes. Therefore, please refer to the code table included with the remote control for the latest code set.
Press the Media Selector button on the remote control repeatedly until the required green light (VCR or DVD) is lit. If Media Selector is on TV position, code numbers will not be stored.
Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily.
Turn on your brand VCR or DVD and check that the main functions work. If your device is not working or some of the functions do not work please check that you entered the correct code set or try the next code listed against the brand. Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset your brand of DVD or VCR please repeat the above steps. A small label is added inside the battery door to allow you to record your brand codes. Not all brands are covered and not all models of every brand may be covered.
VCR Brand List
SONY (VHS) SONY (BETA) SONY (DV) AIWA AKAI DAEWOO GRUNDIG HITACHI JVC LG LOEWE MATSUI ORION PANASONIC PHILIPS SAMSUNG SANYO SHARP THOMSON TOSHIBA
DVD Brand List
SONY AIWA DENON GRUNDIG HITACHI JVC KENWOOD LG LOEWE MATSUI ONKYO PANASONIC PHILIPS PIONEER SAMSUNG SANYO SHARP THOMSON TOSHIBA YAMAHA
301, 302, 303, 308, 309 303, 307, 310 304, 305, 306 325, 331, 351 326, 329, 330 342, 343 358, 355, 360, 361, 320, 351 327, 333, 334 314, 315, 322, 344, 352, 353, 354, 348, 349 332, 338 358, 355, 360, 361, 320, 351 356, 321, 323 311, 312, 313, 316, 317, 318, 358, 359 339, 340, 341, 345 335, 319, 350 337
018, 027, 020, 002 009, 028, 023, 024, 016, 003 025, 026, 015, 004 006, 015, 014 009, 028, 023, 024, 016, 003 013, 018, 027, 020, 002 009, 028, 023, 024, 016, 011, 019, 003 018, 027, 020, 002
TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF, B21-B69 Picture Tube: Flat Display FD Trinitron WIDE: KV-32LS60B: 32 (approx. 82 cm. measured diagonally) KV-28LS60B: 28 (approx. 71 cm. measured diagonally) Rear Terminals 1/ 1 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output.
Side Terminals S 4 S Video input 4 pin DIN 4 video input phono jack 4 audio input phono jacks headphones jack Sound Output: 2 x 20 W (music power) 2 x 10 W (RMS) Woofer: 30 W (music power) 15 W (RMS) Power Consumption: KV-32LS60B: 130 W KV-28LS60B: 125 W Standby Power Consumption: 0.3 W Dimensions (w x h x d) : KV-32LS60B: Approx. 892 x 565 x 584 mm. KV-28LS60B: Approx. 806 x 497 x 540 mm. Weight: KV-32LS60B: Approx. 62.2 Kg. KV-28LS60B: Approx. 45.4 Kg. Accessories supplied: 1 Remote Control (RM-932) 2 Batteries (IEC designated) Other features: 100 Hz picture Teletext, Fastext, TOPtext (250 page TEXT memory) Sleep Timer Smartlink (direct link between your TV set and a compatible VCR. For more information on Smartlink, please refer to the Instruction Manual of your VCR). TV system Autodetection. Dolby Virtual. BBE. Auto Format. ACI (Auto Channel Installation).
2 21-pin Scart connector
(CENELEC standard) including audio / video input, RGB input, monitor audio/video output.
3 21-pin Scart connector
(CENELEC standard) including audio / video input, S video input, selectable audio / video output and Smartlink interface. audio outputs (Left/ Right) - phono jacks
Design and specifications are subject to change without notice. Ecological Paper - Totally Chlorine Free
Here are some simple solutions to problems which may affect the picture and sound.
Problem No picture (screen is dark) and no sound. Solution Check the aerial connection. Plug the TV in and press the button on the front of the TV. If the standby indicator is on, press TV button on the remote control. Using the menu system, select the Picture Adjustment menu and select Reset to return to the factory settings.
Poor or no picture (screen is dark), but good sound.
Check that the optional equipment is on and press the No picture or no menu information button repeatedly on the remote control until the from equipment connected to the Scart correct input symbol is displayed on the screen. connector. Good picture, no sound. Press the + button on the remote control. Check that TV Speakers is On in the Detail Set Up menu. Check that headphones are not connected. Using the menu system, select the Picture Adjustment menu and select Reset to return to factory settings. Turn off any equipment connected to the Scart connector on the rear of the TV. Using the menu system, enter to the Language/Country menu and select the country in which you operate the TV set. For Cyrillic languages, we recommend to select Russia country in the case that your own country does not appear in the list. Using the menu system, select the Picture Rotation option in the Detail Set Up menu to correct the picture slant. Using the menu system, select the Manual Programme Preset menu and adjust Fine Tuning (AFT) to obtain better picture reception. Using the menu system, select the Noise Reduction option in the Detail Set Up menu and select Auto to reduce the noise in the picture. Using the menu system, select the Set Up menu. Then enter to Detail Set Up option and set AV3 Output to TV. Check that the Decoder is not connected on the scart 2/ 2. Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD). If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on Remote Control Configuration for VCR/DVD chapter of this instruction manual. Replace the batteries. Contact your nearest Sony service centre.
No colour on colour programmes.
Distorted picture when changing programmes or selecting teletext. Wrong characters appear when viewing teletext.
Noisy picture when viewing a TV channel.
No unscrambling or unstable picture whilst viewing a scrambled channel with a decoder connected through the 3/ S 3. Scart connector Remote control does not function.
The standby indicator flashes.
on the TV
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Sony Espaa, S.A.
Printed in Spain Ecological Paper - Totally Chlorine Free
Nespresso N9 NEW Golf Avtl 83 Scanner SCX-6345N-XEE EWH-80SL SF-3100T DVD-514 Clix 2 42LG5000 XRS 9745 Optoma HD72 CF-50LB2udkm Hillsfar S-301 SHD514XF1 LCD72VM Starbase 2010 MV600 HDR-CX7EK C-3020 Zoom DPF-D92 ESF610 KLV-40S400A IC-2GAT RC-6064 KEX-P820RDS SP0802N-KIT LN55C750 CHM-S630 MC-09 CZ02RT11P CDE-7872 Sbcru760 00 Beartracker-1999 S807D DW1620 PRO AFG 7080 MI6896 NAD 218 Wheeler IS-85 Multimeter EH-TW5000 CR202EM8 RM4213 Setup Antennilaitteet KDF-50E2000 Pl9125C Replicator 2 S5050 BE325 CD2502S 05 Mf9130 SX-KN1600 ES-8807 Benq X900 Gr-d33 DMC-FX3 SGH-E300 CP-29Q12P SD4050 Evolve L730 VK2000 2 40 PW-LT220 HS-82 4011C Minolta 7145 Vodafone 720 Control F5D7230 N91-1 LE40C678 VPL-FX52 B1342N0EU Cleaner Etrex KV-29FX64K CX-76G Review RHT398H WV-CF20 YH-925GS Chartplotter GO 106 Infocus IN34 Finepix E500 NVA-VF1 Galaxy 500 Streak XEA102 EL9900 HTS9800W TEU-103 BK BX300F SD-V290-s-TC DR-MX1sus-dr-mx1
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101