VCT-SP2BP VCT-SP1BP

Camcorder Support

VCT-SP2BP

Two-way Camcorder Support System
Sonys new VCT-SP2BP camcorder support is designed to smoothly integrate with consumer and professional tripod heads. A quick release system allows camera operators to easily follow the action from tripod to stabilized handheld shooting and back again.
Preset the shoulder pad to fit your size
Adjust the length of the shoulder pad and fix it using a screw
Easy transformation from tripod operation style to shoulder support style
1. Easily detach the camcorder from tripod
Comes with various adaptors
2. Stretch out the shoulder pad and put camcorder on shoulder
* Instant support is available using only the shoulder pad
Comes with an accessory adaptor Comes with VCT-U14 Adaptor Various accessories can be mounted
Ex. Wireless microphone receiver
3. Lower the chest pad 4. Stretch out the chest pad
5. A three point support is achieved using the shoulder, chest and your hand
Screw the accessory adaptor on to VCT-SP2BP
Perfect Design for Both Shoulder Support and Tripod Usage
Chest pad opening angle 0 ~ 90 Minimum length (Approx.) 359 mm Maximum length (Approx.) 470 mm Chest pad opening stiffness adjusting dial
Shoulder pad preset screw
Minimum length (Approx.) 249 mm

Chest pad adjust lock

Tripod attachment screw
Shoulder pad adjust lock Maximum length (Approx.) 363 mm

VCT-SP1BP

Multi-purpose Camcorder Support System
Weight Support for Stable and Comfortable Shooting VCT-SP1BP is a weight support system for handheld camcorders. Shoulder and hip weight distribution reduce hand/arm load weight.
Maintain Shooting Mobility
Comfortable and portable, the monopod system provides mobility to allow flexible shooting styles. Easy set-up with one action harness connection attach/ detach system.
Remote Control Capability
Remote Commander unit RM-1BP is supplied with this system. You can remotely control the basic functions of your camcorder such as record start/stop, zoom and focus. This is especially useful for high angle shooting where you cannot operate your camcorder directly,

SNAP!!

Easy setting

One Snap action

Supports Varieties of Shooting Styles
Using the VCT-SP1BP you have the flexibility to move around , while maintaining a stable shot even in crowded areas. Three main shooting styles are possible with the VCT-SP1BP. 1. Normal shooting 2. High angle shooting 3. Monopod shooting
Remote Commander unit RM-1BP is supplied
Nomal Shooting High Angle Shooting Monopod Shooting
Perfect Design as a Camcorder Monopod

Quick shoe plate

Slide bolt For weight balance Two bolts (removable) For more stable attach
Left side tilt lock lever

Safety lock

Carbon shaft 1670 mm Lever type adjustment 522 mm
Quick shoe lever Oil uid head (tilt) Counter balance adjustment

Screw a bolt by ngers

Rubber foam
VCT-SP2BP & VCT-SP1BP Comparison chart
Need long time weight support?
Want to take high angle shots?
Need good weight support?

Need a compact system?

VCT-SP2BP VCT-SP2BP
Want to use a tripod as well? Want to attach accessories?

Specifications

VCT-SP2BP Dimension (Approx.) Weight (Approx.) Maximum Load W 14 1/4 x H 2 1/8 x D 5 3/8 inches (359 x 52 x 134 mm) 29.6 oz (840 g) 4 kg (Not only camera, but all attached load)

VCT-SP1BP Monopod Dimension (Approx.) Weight (Approx.) Maximum Load Tilting Angle <Down> Tilting Angle <Up> Remote Controller

4 1/2 (114)

Max. Height 65 7/8, Min. Height 20 5/8 inches (1670, 522 mm) 2 lb14 oz (1.3 kg) 5 kg (Not only camera, but all attached load) 60 degrees 45 degrees Rec. Start / Stop Variable Zoom Zoom Speed (3steps), Zoom Direction Switch, Rec Review, Focus 39 3/8 inches (1000 mm)

DIMENSIONS

Rec. Start / Stop Zoom

5 3/4 (144)

Other functions Length of Cord (Approx.)

4 3/4 (120)

3 1/2 (89)

5 3/8 (134)

3 (75)
9 7/8 (249) 14 1/4 (359) 14 3/8 (363) 18 5/8 (470)

2 1/8 (52)

20 5/8 (522)

Unit: inches (mm)

2010 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. All non-metric weights and measurements are approximate. Sony, "make.believe" and their respective logos and Remote Commander are trademarks of Sony.

V-2464 (MK10678V1)

Printed in USA (4/10)

4 7/8 (121)

5 3/4 (143)

3 1/8 (88)