Reviews & Opinions
Independent and trusted. Read before buy Sony VPL-CS20!

Sony VPL-CS20

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony VPL-CS20 Home Cinema Projector, size: 2.9 MB
Related manuals
Sony VPL-CS20 Annexe 1

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony VPL-CS20About Sony VPL-CS20
Here you can find all about Sony VPL-CS20 like manual and other informations. For example: review.

Sony VPL-CS20 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony VPL-CS20 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony VPL-CS20 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
giordanom 4:09pm on Saturday, August 21st, 2010 
Found product very satisfactory. Advantage lightweight, auto adjustment of focus, setup. Bright output on screen, white definition good.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

2-636-561-11 (1)

Data Projector

Operating Instructions

VPL-CX20 VPL-CS20

2005 Sony Corporation

Table of Contents

Overview

Features... 3 Location and Function of Controls. 4 Top/Front/Left Side.. 4 Rear/Right Side/Bottom.. 4 Control/Connector Panel. 5 Remote Commander. 6 The Setup Menu.29 The Information Menu.30

Maintenance

Replacing the Lamp.32 Cleaning the Air Filter..34

Projecting the Picture

Installing the Projector.. 8 Connecting the Projector. 9 Connecting a Computer. 9 Connecting a VCR. 10 Projecting... 11 Turning Off the Power. 14

Others

Troubleshooting..35 Messages List..38 Specifications..40 Index..44

Convenient Functions

Selecting the Menu Language.. 15 Security Lock.. 16 Other Functions.. 18 Off & Go Function. 18 Effective Tools for Your Presentation.. 18
Adjustments and Settings Using a Menu
Using a MENU.. 20 The Picture Menu.. 22 The Signal Menu.. 23 The Function Menu. 25 The Installation Menu.. 27

B Overview

Features
High brightness, high picture quality
High brightness Adopting Sony's unique new optical system that incorporates newly developed LCD panels provides a high-efficiency optical system. It allows the 165 W UHP lamp to give a light output of 2000 ANSI lumen. High picture quality VPL-CX20: Three super-high-aperture 0.63-inch XGA panels with approximately 790,000 effective pixels, produce a resolution of dots (horizontal/ vertical) for RGB input, and 750 horizontal TV lines for video input. VPL-CS20: Three super-high-aperture 0.63inch SVGA panels with approximately 480,000 effective pixels, produce a resolution of dots (horizontal/ vertical) for RGB input, and 600 horizontal TV lines for video input.
Short focal lens The projection distance is very short, approximately 2.3 m (7.6 feet), when projecting an 80-inch image, which allows projection on a larger screen even in a limited space.

Off & Go feature

The cooling fan built into the projector will work even after the power is turned off and the power cord is disconnected. This enables you to move the projector to another location immediately after turning it off.

Security Functions

Security lock This function makes it possible to prevent projection of a picture on the screen unless the required password is entered when the projector is turned on. Panel key lock This function locks all the keys on the control panel of the projector, allowing use of the keys on the Remote Commander. This prevents the projector from operating incorrectly.

Compact and lightweight

The projector is light because the weight is only about 1.9 kg, and the body is designed to be thin. This makes the projector convenient for carrying.

About Trademarks

Adobe Acrobat is a trademark of Adobe Systems Incorporated. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. VGA, SVGA, XGA and SXGA are registered trademarks of the International Business Machines Corporation, U.S.A. Kensington is a registered trademark of Kensington Technology Group. Macintosh is a registered trademark of Apple Computer, Inc. VESA is a registered trademark of the Video Electronics Standard Association. Display Data Channel is a trademark of the Video Electronics Standard Association.

To connect a computer

Left side

Connecting a Computer

This section describes how to connect the projector to a computer. For more information, refer to the computers instruction manual.
White to audio output (L)

Red to audio output (R)

to monitor output

Computer

A HD D-sub 15-pin cable (supplied) B A/V connecting adaptor (supplied) C Audio cable (not supplied) (Connect only when you want to output the audio from the speaker of the projector.)
The projector accepts VGA, SVGA, XGA, SXGA, and SXGA+ signals. However, we recommend that you set the output mode of your computer to XGA (VPL-CX20) or
SVGA (VPL-CS20) mode for the external monitor. If you set your computer, such as a notebook computer, to output the signal to both your computers display and the external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor.
To connect to a video or S video output connector
For details, refer to the operating instructions supplied with your computer.
To connect a Macintosh computer equipped with a video output connector of a type having two rows of pins, use a commercially available plug adaptor.

Connecting a VCR

This section describes how to connect the projector to a VCR. For more information, refer to the instruction manuals of the equipment you are connecting.
to video output to S video output White to audio output (L) Red to audio output (R)
A A/V connecting adaptor (supplied) B S-video cable (not supplied) or Video cable (not supplied) C Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)
Connect either a video or S video output connector.
To connect to a video GBR/ Component output connector

Projecting

ON/STANDBY indicator
Rear remote control detector to video GBR/ component output
VCR A SMF-402 Signal Cable (not supplied) HD D-sub 15-pin (male) 3 phono jack B A/V connecting adaptor (supplied) C Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)
Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into standby mode.
Set the aspect ratio using Wide Mode on the Signal menu according to the input signal.

Press the ?/1 key.

The ON/STANDBY indicator flashes in green and the Advanced Intelligent Auto-setup starts. The powered tilt adjuster rises and stops at the previously adjusted position and adjusts the focus.
Switch the equipment connected to output to the projector.

Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., , etc.), or by changing your computers settings.
The projection size that can be adjusted with the automatic focus adjustment is from 40-inch up to 150-inch. However, it may not be perfectly adjusted depending on the brightness of the room, or the state of the screen. In this case, adjust it manually in step 8 on page 13.
Turn on the equipment connected to the projector. Press the INPUT key to select the input source.
Each time you press the key, the input signal switches as follows:
Input-A t Video t S-Video

or and

To input from Computer connected to the INPUT A connector Video equipment connected to the AUDIO/VIDEO input connector Video equipment connected to the AUDIO/S-Video input connector
Press INPUT to display Input-A Video
The key used for switching the computer to output to the projector varies depending on the type of computer.
Adjust the upper or lower position of the picture.
To adjust using the Remote Commander Press the TILT/KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the v/V/ b/B keys. To adjust using the control panel on the left side of the projector Press v or V of the TILT key to adjust the tilt of the projector.

S-Video

Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.
If Auto Input Search is set to On, the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.
For details, see Auto Input Search on page 25.
The Smart APA feature is effective for the input signal from a computer only.

to raise the projector

Press the LENS key on the Remote Commander to display the Lens Zoom menu and adjust the size of the picture using the v/V/b/B keys. To adjust using the control panel on the left side of the projector Press the ZOOM +/ keys on the projector to adjust the size of the picture.
TILT adjustment key to lower the projector

Adjust the focus.

To adjust the focus automatically Press the AUTO FOCUS key on the left side of the projector or on the Remote Commander. To adjust the focus manually To adjust the focus using the Remote Commander: Press the LENS key on the Remote Commander to display the Lens Focus menu and adjust the focus using the v/ V/b/B keys. To adjust using the control panel on the left side of the projector: Press the FOCUS +/ keys to adjust the focus.

Powered tilt adjuster

When you adjust the powered tilt adjuster with the TILT key, the V keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the V Keystone menu to Manual. (See page 27.) If you set the V Keystone adjustment to Auto, the V Keystone correction is automatically adjusted. However, it may not be perfectly adjusted depending on the room temperature or the screen angle. In this case, adjust it manually. Press the TILT/KEYSTONE key on the Remote Commander until V Keystone appears on the screen, and adjust the value with the v/V/b/B key. The corrected value is effective until the power is turned off. Be careful not to let the projector down on your fingers. Do not push hard on the top of the projector with the powered tilt adjuster extended. It may cause a malfunction.
Adjust the size of the picture.
To adjust using the Remote Commander

Turning Off the Power

POWER OFF? Please press ?/1 key again. appears to confirm that you want to turn off the power.
The message disappears if you press any key other than the ?/1 key, or if you do not press any key for five seconds.

Press the ?/1 key again.

The powered tilt adjuster is retracted into the projector. The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 45 seconds. During this time, you will not be able to light up the ON/STANDBY indicator again with the ?/1 key.
Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.
When you cannot confirm the onscreen message When you cannot confirm the on-screen message under certain conditions, you can turn off the power by holding the ?/1 key for about two seconds instead of above steps 1 and 2.
The internal circuitry of the Off & Go function may cause the fan to continue to operate for a short time even after the ?/1 key is pressed to turn off the power and the ON/STANDBY indicator changes to red.

B Convenient Functions

Selecting the Menu Language
You can select one of fifteen languages for displaying the menu and other on-screen displays. The factory setting is English. To change the menu language, proceed as follows:
Press the ?/1 key to turn on the projector. Press the MENU key.
The menu appears. The menu currently selected is shown as a yellow button.
Press the v or V key to select the Setup menu, then press the B or ENTER key.

Turn the main power off and disconnect the AC power cord.
The security lock is set to on, then it becomes effective. The screen used for

Other Functions

Off & Go Function
If you are leaving the conference room immediately, turn the projector off, and then, after the powered tilt adjuster is retracted into the projector, you can unplug the AC power cord. After the AC power cord is unplugged, the fan runs for a certain time automatically.
Effective Tools for Your Presentation
To enlarge the image (Digital Zoom function)
You can select a section of the image to enlarge. This function works when a signal from a computer is input. This function does not work when a video signal is input.
When unplugging the AC power cord, ensure that the powered tilt adjuster has been retracted into the projector. Moving the projector with the powered tilt adjuster extended may damage the adjuster. Turn off the projector according to the procedure explained in Turning Off the Power on page 14, then cool it down before storing the projector in the carrying case. However, if the unit has been on for less than 15 minutes, the fan might not begin to turn as a result of inadequate charging. In that case, follow the procedure for turning off the power as described in Turning Off the Power on page 14.
Project a normal image, and press the D ZOOM + key on the Remote Commander.
The digital zoom icon appears in the center of the image.

Digital zoom icon

Move the icon to the point on the image you want to enlarge. Use the arrow key (v/V/b/B) to move the icon. Press the D ZOOM + key again.
The portion of the image where the icon is located is enlarged. The enlargement ratio is displayed on the screen for a few seconds. By pressing the + key repeatedly, the image size (ratio of enlargement: max. 4 times) increases.
Use the arrow key (v/V/b/B) to scroll the enlarged image.
To return the image to its original size Press the D ZOOM key. Just pressing the RESET key returns the image back to its original size immediately.
To freeze the image projected (Freeze function)
Press the FREEZE key on the remote commander. Freeze appears when the key is pressed. This function works when a signal from a computer is input. To restore the original screen, press the FREEZE key again.
B Adjustments and Settings Using a Menu

Using a MENU

The projector is equipped with an on-screen menu for making various adjustments and settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting menu or adjustment menu with no main menu, or in the next menu window. If you select an item name followed by an arrow (B), the next menu window with setting items appears.To change the onscreen menu language, see Selecting the Menu Language on page 15.

Wide Mode

Scan Converter
Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute an infringement of the rights of authors or producers, which are legally protected.
About the Preset Memory No.
This projector has 40 types of preset data for input signals (the preset memory). When a preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed on the Information menu (See page 30). You can also adjust the preset data through the Signal menu. This projector has 20 types of user memories for Input-A into which you can save the setting of the adjusted data for an unpressed input signal. When an unpressed signal is input for the first time, a memory number is displayed as 0. When you adjust the data of the signal using the Signal menu, it will be registered in the projector. If more than 20 user memory items are registered, the newest memory always overwrites the oldest one. See the chart on page 42 to find if the signal is registered in the preset memory. Since the data for the following signals is recalled from the preset memory, you can use these preset data items by adjusting H Size. Make finer adjustments by adjusting Shift.
Signal Super Mac-2 SGI-1 Macintosh 19" Macintosh 21" Sony News PC-1024 WS Sunmicro
Memory No. SIZE 1600 1664
When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black.

The Function Menu

The Function menu is used for changing the settings of the projector.

Setting items Smart APA

The APA (Auto Pixel Alignment) automatically On adjusts Dot Phase, H Size and Shift on the Signal menu for the input signal from a computer. On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the Smart APA, it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if Smart APA set to On. Off: The APA functions when you press the APA key on the Remote Commander. When set to On, the projector detects input signals in Off the following order: Input-A/Video/S-Video. It indicates the input channel when the INPUT key is pressed. When set to Off, the focus adjustment does not work On automatically when the projector is turned on or when the AUTO FOCUS key on the projector or the remote commander is pressed. When set to On, a test pattern is displayed on the screen during Lens Zoom, Lens Focus, or V Keystone adjustment. When set to Low, the power consumption is set to low in standby mode. Off

Auto Input Search

Auto Focus

Test Pattern

Standby Mode Power Saving

Standard

When set to On, the projector goes into power saving Off mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. The power saving mode is canceled when a signal is input or any key is pressed. In power saving mode, no keys function for the first 45 seconds after the lamp goes out.
Setting items Panel Key Lock
Off Locks all the control panel keys on the side panel of the projector so that the projector can be operated only with the Remote Commander. To lock the control panel keys, set to On. When it is set to On, keeping the ?/1 key on the control panel pressed for 10 seconds turns the projector on when it is in standby mode, and turns the projector to standby mode when the power is on. If you press and hold the MENU key for about 10 seconds when the power is on, the lock will be released and Panel Key Lock is automatically set to Off. Turns on the projectors security lock function. When set to On, turns on the security lock function, which locks the projector once a password has been set. For details, see Security Lock on page 16. Off
Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen. You can cancel the adjustment by pressing the APA key again while Adjusting appears on the screen. The picture may not be adjusted properly depending on the type of input signal. Adjust the Dot Phase, H Size, and Shift items on the Signal menu when you adjust the picture manually.

The Installation Menu

The Installation menu is used for changing the settings of the projector.
Setting items Tilt. V Keystone
Functions Adjusts the position (height) of the projected picture.
Corrects the trapezoidal distortion caused by the projection Auto angle. Select Auto for automatic correction, or Manual for manual correction using the v/V/b/B keys on the Remote Commander. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Selects the background color of the screen when no signal is input to the projector. Select Black or Blue. Normally, set to Blue. Sets the lamp brightness used during the projection. High: Illuminates the projected image brightly. Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the High setting. Blue

Background

Lamp Mode

Lens Control

When set to Off, the LENS (FOCUS, ZOOM) key on the On Remote Commander, and the FOCUS and ZOOM keys on the projector do not function. Selects the remote control detectors (IR Receiver) on the front and rear of the projector. Front & Rear: Activates both the front and rear detectors. Front: Activates the front detector only. Rear: Activates the rear detector only. Selects whether the SONY logo on the rear panel of the projector lights when the projector is on. Set to On when the projector is used at an altitude of 1,500 m or higher. Front & Rear

IR Receiver

Illumination High Altitude Mode

On Off

The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle.

The Setup Menu

The Setup menu is used for changing the menu displays.
Setting items Status (on-screen display)
Functions Sets up the on-screen display. When set to Off, turns off the on-screen displays except for the menus, a message when the power is turned off, and warning messages. Selects the language used in the menu and on-screen displays. The languages available are: English, Nederlands, Franais, Italiano, Deutsch, Espaol, Portugus, , Svenska, Norsk, , , , and.

Initial setting On

Language
English Adjustments and Settings Using a Menu
Auto Input-A Signal Sel. Selects the Auto, Computer, Component, or Video GBR signal input via the INPUT A connector. When the Auto is selected, the type of the input signal is detected automatically. When the input signal is not displayed correctly with this item set to Auto, select the item according to the input signal. Color System Selects the color system of the input signal. If you select Auto, the projector detects the color system of the input signal automatically. If the picture is distorted or colorless, select the color system according to the input signal. When the color system of the input signal is PAL60, select PAL. If Auto is selected, the color system cannot be detected. Auto

The Information Menu

The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp.
Model name Serial number Memory number of an input signal Signal type
Setting items fH fV Lamp Timer
Functions Displays the horizontal frequency of the input signal. The displayed value is approximate. Displays the vertical frequency of the input signal. The displayed value is approximate. Indicates how long the lamp has been turned on.

These are only displayed on the screen. You cannot alter the display, and these is no setting to be altered.
Input signals and adjustable/setting items

Adjust Picture. menu

Item Input signal Video or S-Video (Y/C) Contrast Brightness Color Hue Component Video GBR Computer B&W

z z z z

(NTSC 3.58/4.43 only)

z z z z z

Sharpness Gamma Mode Color Temp. Volume

z z*1 z z

z z z
z : Adjustable/can be set : Not adjustable/cannot be set *1 : Preset memory No. 3, 4 only Adjustments and Settings Using a Menu

Signal menu

Item Input signal Video or S-Video (Y/C) Dot Phase H Size Shift Scan Converter Wide Mode Component Video GBR Computer B&W

z*1 z*3

z z z z*2
z : Adjustable/can be set : Not adjustable/cannot be set *1: Except preset memory No. 3, 4 *2 : VPL-CX20: Lower than SVGA VPL-CS20: Lower than VGA *3: Except preset memory No. 7, 8, 10, 11

B Maintenance

Replacing the Lamp
The lamp used as a light source is a consumable product. Thus, replace the lamp with a new one in the following cases. When the lamp has burnt out or dims Please replace the Lamp. appears on the screen The LAMP/COVER indicator lights up The lamp life varies depending on conditions of use. Use an LMP-C162 Projector Lamp as the replacement lamp. Use of any other lamps than the LMP-C162 may cause damage to the projector.

Caution

Be sure that the projector is stable after turning it over.
Open the lamp cover by loosening the three screws with a Phillips screwdriver.
The lamp remains not after the projector is turned off with the ?/1 key. If you touch the lamp, you may burn your finger. When you replace the lamp, wait for at least an hour for the lamp to cool.

Note Notes

If the lamp breaks, contact your Customer Information Center. Pull out the lamp by holding the handle. If you touch the lamp, you may be burned or injured. When removing the lamp, make sure it remains horizontal, then pull straight up. Do not tilt the lamp. If you pull out the lamp while it is tilted and if the lamp breaks, the pieces may scatter, causing injury.
For safety reasons, do not loosen any other screws.
Loosen the two screws on the lamp unit with the Phillips screwdriver (a). Fold out the handle (b), then pull out the lamp unit by the handle (c).
Turn off the projector, and disconnect the AC power cord from the AC outlet.

B Others

Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel.
Symptom Cause and Remedy The power is not turned on. The power has been turned off and on with the ?/1 key at a short interval. c Wait for about 45 seconds before turning on the power (see page 14). The lamp cover is not secured. c Close the lamp cover securely (see page 33). The air filter cover is detached. c Attach the air filter cover securely (see page 34). The electrical system has broken down. Both the LAMP/COVER and TEMP/FAN indicators c Consult with qualified Sony personnel. light up. The powered tilt adjuster is The AC power cord was unplugged with the power of the projector turned on. not retracted into the c Connect the power cord to the AC outlet again, turn on the power projector. of the projector, then turn it off.
Symptom No picture. Cause and Remedy A cable is disconnected or the connections are wrong. c Check that the proper connections have been made (see page 9). The connections are wrong. c This projector is compatible with DDC2B (Digital Data Channel 2B). If your computer is compatible with DDC, turn the projector on according to the following procedures. 1 Connect the projector to the computer. 2 Turn the projector on. 3 Start the computer. Input selection is incorrect. c Select the input source correctly using the INPUT key (see page 12). The computer signal is not set to output to an external monitor or set to output both to an external monitor and a LCD monitor of a computer. c Set the computer signal to output only to an external monitor. c Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys or by changing your computers settings. For details, refer to the computers operating instructions supplied with your computer.
Symptom The picture is noisy.
Cause and Remedy Noise may appear on the background depending on the combination of the number of dots input from the connector and the numbers of pixels on the LCD panel. c Change the desktop pattern on the connected computer. The setting of Input-A Signal Sel. on the Setup menu is incorrect. c Select Auto, Computer, Video GBR or Component correctly according to the input signal (see page 29). The setting of Input-A Signal Sel. on the Setup menu is incorrect. c Select Auto, Computer, Video GBR or Component correctly according to the input signal (see page 29).

General

210 mm (10 3/1/3/8 inches) (w/h/d) (without projecting parts) Mass Approx. 1.9 kg (4 lb 3 oz) Power requirements AC 100 to 240 V, 2.2 to 1.0 A, 50/ 60 Hz Power consumption Max. 220 W in standby: 0.8 W Heat dissipation 750.7 BTU Operating temperature 0C to 35C (32F to 95F) Operating humidity 35% to 85% (no condensation) Storage temperature 20C to +60C (4F to +140F) Storage humidity 10% to 90% Supplied accessories Remote Commander (1) Lithium battery CR2025 (1) HD D-sub 15 pin cable (2 m) (1) (1-791-992-XX) A/V connecting adaptor (1) (1-830-658-XX) Carrying case (1) AC power cord (1) Operating Instructions (CD-ROM) (1) Quick Reference Manual (1) Safety Regulations (1) Security Label (1) Dimensions Design and specifications are subject to change without notice.

Pin assignment

INPUT A connector (HD D-sub 15-pin, female)
R/R-Y G/Y B/B-Y GND GND GND (R) GND (G) GND (B)
N.C. GND GND DDC/SDA HD/C.Sync VD DDC/SCL

Optional accessories

Projector Lamp LMP-C162(for replacement) Signal Cable SMF-402 (HD D-sub 15-pin (male) y 3 phono type (male))
Some of the items may not be available in some areas. For details, please consult your nearest Sony dealer.

Preset signals

Memory Preset signal No. 5 Video 60 Hz Video 50 Hz 480/60i 575/50i 480/60p 60 Hz 50 Hz 480/60i 575/50i 480/60p (Progressive component 575/50p (Progressive component 1035/60i, 1080/60i 1080/50i 720/60p 720/50p VGA mode 1 VGA VESA 85 Hz PC-9801 Normal VGA mode 2 VGA VESA 85 Hz VGA mode 3 Macintosh 13" VGA VESA 72 Hz VGA VESA 75 Hz VGA VESA 85 Hz fH (kHz) fV (Hz) 15.734 15.625 15.734 15.625 31.470 59.940 50.000 59.940 50.000 60.000 Sync S on G/Y S on G/Y S on G/Y SIZE

575/50p

31.250

50.000

S on G/Y
1080/60i 1080/50i 720/60p 720/50p 640 350
33.750 28.130 45.000 37.500 31.469 37.861 24.823 31.469 37.861 31.469 35.000 37.861 37.500 43.269
60.000 50.000 60.000 50.000 70.086 85.080 56.416 70.086 85.080 59.940 66.667 72.809 75.000 85.008 56.250 60.317 72.188 75.000 85.061 74.550 60.004 69.955 75.029 84.997
S on G/Y S on G/Y S on G/Y S on G/Y H-pos, V-neg H-pos, V-neg H-neg, V-neg H-neg, V-pos H-neg, V-pos H-neg, V-neg H-neg, V-neg H-neg, V-neg H-neg V-neg H-neg V-neg H-pos, V-pos H-pos, V-pos H-pos, V-pos H-pos, V-pos H-pos, V-pos H-neg, V-neg H-neg V-neg H-neg V-neg H-pos, V-pos H-pos, V-pos

1312 1376

SVGA VESA 56 Hz 35.156 SVGA VESA 60 Hz 37.879 SVGA VESA 72 Hz 48.077 SVGA VESA 75 Hz 46.875 SVGA VESA 85 Hz 53.674

1024 768

Macintosh 16" XGA VESA 60 Hz XGA VESA 70 Hz XGA VESA 75 Hz XGA VESA 85 Hz
49.724 48.363 56.476 60.023 68.677
Memory Preset signal No. 49* 50
fH (kHz) fV (Hz) SXGA VESA 70 Hz 63.995 SXGA VESA 75 Hz 67.500 SXGA VESA 85 Hz 77.487 70.019 75.000 85.057 65.960 60.000 75.000 60.013 75.025 85.024 60.020
Sync H-pos, V-pos H-pos, V-pos H-pos, V-pos H-neg, V-neg H-pos, V-pos H-pos, V-pos H-pos, V-pos H-pos, V-pos H-pos, V-pos H-neg, V-neg

SIZE 1476 1688

1152 864

1280 1024

Sunmicro LO

61.795

SXGA VESA 60 Hz 60.000 SXGA VESA 75 Hz 75.000 SXGA VESA 60 Hz 63.974 SXGA VESA 75 Hz 79.976 SXGA VESA 85 Hz 91.146

1400 1050

SXGA+ 60 Hz

63.981

When a signal other than the preset signals shown above is input, the picture may not be displayed properly. For the Memory No.49*, the smart APA function and the APA key of the remote commander do not active. Make adjustments for the input signal using the Adjust Signal. on the Signal menu. When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this case, input a signal with no black edges around the image, and disconnect and reconnect the cable or select the input signal by pressing the INPUT key.
Warning on power connection
Use the supplied power cord when you use the projector in your country/region. Otherwise, use a proper power cord meeting the following specifications.
The United States, Canada Plug type Female end Cord type Rated Voltage & Current Safety approval Cord length (max.) YP-11 YC-13L SPT-2 10A/125V UL/CSA 4.5 m Continental Europe, Korea YP-21 YC-13L 2.5A/250V VDE UK Australia Japan
SP-61 YC-13L 2.5A/250V BS

B8 C7-2 2.5A/250V SAA

YP-13 YC-13L 7A/125V DENAN
H03VVH2-F H03VVH2-F H03VVH2-F VCTFK
Adjusting memory of the settings. 21 the picture.. 22 the picture size/shift.. 23 Air filter... 34 Auto Focus... 25 Auto Input Search.. 25
Lamp Mode..27 Lamp replacement..32 Lamp Timer..30 Language..29 selecting the menu language.15 Lens Control..27 Location and function of controls control/connector panel..5 rear/right side/bottom..4 Remote Commander..6 top/front/left side..4
Background.. 27 Brightness.. 22
Menu clearing the menu display..21 Function menu..25 Information Menu..30 Installation menu..27 Picture menu..22 Setup menu..29 Signal menu...23 using the menu..20 Message List caution..38 warning..38
Color.. 22 Color System.. 29 Color Temp.. 22 Connecting a computer.. 9 Connecting a VCR.. 10 Contrast... 22
Digital Zoom function.. 18 Dot Phase.. 23

doc1

Sony Launches Latest Portable LCD Projectors Sony VPL-CX20 and VPL-CS20 Deliver Outstanding Multimedia Presentations with 3-LCD Technology and Advanced Intelligent Auto Setup Hong Kong, August 5, 2005 Sony Corporation of Hong Kong Limited today announced the launch of its long-awaited ultra-compact and feature-packed projectors, the VPL-CX20 and VPL-CS20, for executives who regularly present in and outside of the office. Both models are highly portable and lightweight enough for todays business executives to travel with from meeting to meeting throughout the day. They enhance the quality of business presentations with their superior image quality, user-friendly functions and stylish design. Their auto setup capabilities also allow for quick and easy setup procedures, saving users valuable time. Hassle-Free Setup Both the VPL-CX20 and VPL-CS20 come with Advanced Intelligent Auto-Setup functions that enable users to set up the projector by simply pressing the power button to automatically recall the previous settings in its memory. The Auto Focus, Power Tilt Adjuster and Keystone Correction settings in both models allow for the concise vertical keystone adjustment of picture geometry, giving an accurate representation of images even in cramped environments. Razor-Sharp Clarity Under Any Lighting The VPL-CX20 and VPL-CS20 are outfitted with the innovative 3-LCD panel system, an advanced projector technology that reproduces a wide gamut of colours to project dynamic, vibrant and beautiful images, which are gentle on the human eyes. Both models are capable of projecting a wide range of colours and the smooth movement of the microscopic liquid crystals in the LCD panels allows for natural colour gradations, especially in darker shades, so that images are faithfully reproduced and dither noise is reduced significantly. Each projector comes with a 125W lamp that offers up to 2000 ANSI lumens. It projects clear and vivid images even when the room lights are left on. Its low wattage lamp also means lower power consumption for the user. The top-of-the-line VPL-CX20 model offers an XGA resolution of 1024 x 768 pixels and 750 TV lines while the VPL-CS20 model gives a true SVGA resolution of 800 x 600 pixels and 600 TV lines for clear display of text and important details.
Copyright 2005 Sony Corporation of Hong Kong Ltd. All Rights Reserved Worldwide.
Lightweight, Stylish and Professional Both models measure 273 (l) x 52 (h) x 210 (w) mm and weigh just 1.9kg, making them among the most compact 2000 ANSI LCD projectors in the market. The small size means that each model fits easily into a briefcase, making it highly portable for the executive on the go. Encased in a sleek, durable aluminum exterior and stylish curves create a minimalist and professional look for corporate meetings and presentations. Enhanced Technological Features The VPL-CX20 and VPL-CS20 are fitted with a highly efficient cooling system, exclusive only to this series of LCD projectors. Its Off & Go function allows the projector to be unplugged and kept away without waiting for the lamp to cool down as it incorporates a builtin circuit that continues to run its cooling fan after the power is cut. The low fan noise means less distraction during meetings. Both projector models feature a short focal-length lens of 2.3 m, which makes it possible for users to project a full-size approximately 80-inch image in small meeting rooms. The multi-scan converter capability allows the projection of images from multiple interfaces, such as all HDTV formats, as well as video (component, composite, S-video and RGB) and digital computer (VGA up to SXGA+) signals. Other features include a password-authentication system, control panel key lock, security lock, Image Freeze function and a 4x digital zoom function. Both the VPL-CX20 and VPL-CS20 are available from early August.

 

Tags

Nuvi 255 Review MW500 BV9050 42PFP5332 Kgna 305 Optio E10 LT-46Z70BU CU-B50dbe8 GC3232 16-HVS CZ-5000 7200 CTE 114-54 3500 Dect DEH-P5100UB MGR-A7 LE19R86WD LV-104U GT-C3110 Servers Vestax QFO 52LB5DF DSC-W390 XS202 Rocktron GAP1 300W401 Brown BOX TX-29PS1P RDR-HX6 BE7914 CS-E9jkew3 P3470 EWT10410W EIW60000X 42PES0001D Siemens AX72 Dvds54 P-2000W 2000LE KX-TCD960 Motorola C651 DVP3266K 51 SSC130B MAX-L42 US2-PM725S P1500 Macro SEW FUN Hw6515 DC-5150 DC-X77Z Sony D25 X-FI GO 4X4-1998 PV-GS19 Aficio1027 French 38 E Roomba 5500 Venza RA610 TH-V70R 2031 HA KD-G612 6900PRO SDM-S71 BB300 Befw11S4-AT GS500ET Toolbox V2-0-D ZDM4714 Diaper BAG HM-535 OK-S32SR MHC-F150 Frontier SVH72BF1 Pioneer A-X7 SMX-F30 BP 870 BT V882NWK FJ1295 VP-D65 Scangear HT-C6930 Desktop PC GN45-032 KV-32S16 Gt-2008 MD-MT180H TV-C1300 V750 PRO LA-12 SR-DVM700EU Impala 2001 DK9923P CLT-9839 LV-B1860HL HT-DDW685

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101