2003 SONY MOBILE PRODUCT GUIDE
480W max power 80W x 2 RMS into 4W, 20Hz-20kHz @ 0.08% THD 200W x 1 RMS into 4W, 20Hz-20kHz @ 0.1% THD Class A/B Variable 50-300Hz Low Pass Filter 40Hz EQ Boost RCA & Speaker Level Inputs
XM-280GTX 2/1 Channel Amplifier
Audio Power Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION 80 watts per channel minimum continuous average power into 4 ohms, both channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion per Car Audio Ad Hoc Committee standards Other Specifications Circuit system Inputs Outputs Suitable speaker impedance Maximum outputs OTL (output transformerless) circuit Pulse power supply RCA pin jacks High level input connector Speaker terminals Through out pin jacks W (stereo) W (when used as a bridging amplifier) 190 W 2 (at 4 W) 240 W 2 (at 2 W) 480 W (monaural) at 4 W 80 W 2 (20 Hz 20 kHz, 0.08% THD, at 4W) 100 W 2 (20 Hz 20 kHz, 0.1% THD, at 2W) 200 W (monaural) (20 Hz 20 kHz, 0.1% THD, at 4W) 5 Hz 50 kHz (+0.5dB, 3 dB) 0.008% or less (at 1 kHz, 4W) 0.2 6.0 V (RCA pin jacks) 1.2 12.0 V (High level input) Hz, 12 dB/oct dB (40 Hz) 10.V at rated output : 20 A (at 4W) Remote input : 1 mA Approx. 196 mm (11 3/1/3/4 in.) (w/h/d) not incl. projecting parts and controls Approx. 2.5 kg (5 lb. 8 oz.) not incl. accessories Mounting screws (4) High level input cord (1) Protection cap (1)
Rated outputs (supply voltage at 14.4 V)
Frequency response Harmonic distortion Input level adjustment range Low-pass filter Low boost Power supply voltage Current drain Dimensions Mass Supplied accessories
Design and Specifications subject to change without notice.
Filter Off/LPF Select Car Audio Input Through Audio Output 30A Fuse 12V Car Battery Ground

Connections

Left Speaker OUT Right Speaker OUT High Level Input Connection
Filter Frequency Select Low Boost Control Input Level Control Remote Output

Dimensions

Unit: mm (in.)