3-257-674-21 (1)

Features
The XA-CC1 is a connection adapter for connecting a car cradle to a Sony master unit having the CD/ MD changer control function. Sony car audio units being compatible with PEGA-CC5 include: Units with CD/MD changer control from 2004 forward Following units MEX-5DI, CDX-M1000TF, CDX-MP80, CDX-M850MP, CDX-M800, CDX-MP40, CDX-CA680X, CDX-MP70, CDX-MP30, CDX-M730, CDX-M630, CDX-CA900, CDX-CA700X, CDX-CA700, CDX-CA600X, CDX-CA600, MDX-CA790X, MDX-M690, MDX-CA680X, MDX-CA580, XR-CA670X, XR-CA370X, XR-CA370, XR-CA630X, XR-CA430X, XR-CA440, XR-CA600V, XR-CA600

Specifications

Power requirement Dimensions Mass Input Output 12 V DC negative earth Approx. 97.2 55.7 23.7 mm (3 7/1/4 15/16 in.) (w/h/d) (not including connection cable) Approx. 260 g (10 oz) (including connection cable) Car cradle I/O input (8pin) SONY-BUS control output (8pins) SONY-BUS audio output (RCA-pin) ATT control output

Connection Adapter

Operating Instructions
Design and specifications are subject to change without notice.

Installation

Before installation
Choose the installation location carefully so that the unit does not interfere with normal driving operations. Avoid installing the unit where it would be subject to : high temperatures, such as from direct sunlight or hot air from the heater. draft, rain or moisture. dust or dirt. magnetic fields. Install the unit in a location that does not obstruct the operation of passenger-side airbag.

Installation location

You are recommended to install the unit inside the car panel or glove box. Please consult a qualified technician or service personnel if you cannot attach the connection adapter to the car securely. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Contents of this manual are printed on using VOC (Volatile Organic Compound)-free vegetable-oilbased ink.

XA-CC1

2004 Sony Corporation Printed in Japan

Connections

Precautions
Before making any connection, disconnect the earth terminal of the car battery to avoid short circuits.

Connection diagram

Black/white striped
1.6m Car battery adapter (supplied with the Car cradle)
0.3m Cigarette socket power cord (supplied)*
continuous power supply earth

Connection example

Car cradle

BUS CONTROL OUT

Car cradle 1.6m 1m
Sony BUS compatible CD/MD changer (optional)
BUS CONTROL IN Connection Adapter XA-CC1 BUS AUDIO IN I/O

SONY BUS

BUS AUDIO OUT ATT or ATT OUT
Light blue Source selector XA-C30 (optional) 1m
Supplied with the CD/MD changer
* Tap the +12V after the fuse box, not directly from the battery. If the connected power supply cord is long, attach fuse (2.5A).
BUS CONTROL IN BUS CONTROL IN

Supplied with XA-C30

Connection Adapter XA-CC1
Source selector XA-C30 (optional)
BUS AUDIO IN BUS AUDIO OUT

Front speaker

BUS AUDIO IN BUS CONTROL OUT

Rear speaker

Sony BUS compatible car audio