Stairville Earthquake DMX 512

Price:180.00

Description StairvilleEarthquakeafantasticnewDMXeffectfromStairville,gobo'spulsateandanimatetothe sound.ThisisarealstunningeffectwithStairvilleseverimpressiveprogramming.4xchannelDMX512 luminaire.Contractgoboforwinkingeffect.14xgobosplusopen,4xglassgobos,8xonecolourgobos, 1xbicolourgobo,1xfourcolourgoboand1xwhite.Inandouteffect,rotation,blackout,strobing, microsteppingmotors,manualfocus,builtinbeatactivatedprograms(standalone),automatically entersstandalonewhennoDMXsignalispresent.Programmable.Fancooled.Thermalswitchsize: 13.3"x12.6"x8.5".Power:110V/230V(switchable).Includesbulb(1xELC24V250W).

DJLase 150-RGY DMX

User Manual
Thank you for using the Stairville DJLase series laser projector. For the sake of safety and better operation of this projector, please read this manual carefully before use and operate the projector , lest incur any personal injury or damage to the projector.
Please check the local Laser assignments in your country before starting the Laser Show!!!

Package list:

When you unpack the case , please take time to examine the items as follow: 1 pcs. Stairville DJLase 150 RGY DMX 1 pcs. Power cord pcs. Owners manual Product Introduction: Stairville DJLase 150 RGY DMX laser performer uses the latest muti-patterns laser control system researched and developed by ourselves. It can control four different patterns with various effects simultaneously. It adopts the latest appearance design to make it compact and light. The housing uses the imported paint. Stairville DJLase 150 RGY DMX laser performer adopts the semiconductor laser source. Laser generator is double-temperature -controlled power supply. The laser light source has a long life span and high stability, complying with the international standard. It uses the latest low speed vibratory scanner system researched and developed by ourselves, international DMX-512 signal control. There are 85 latest geometric laser patterns in it, as well as 26 pre-programmed 4patterns laser shows.It can make tunnel effect and animation, geometric, character and three-dimensional effects, Laser sky effects, Rolling effects, Scanning effects, and Laser tunnel effects in all directions with 5kpps vibratory mirror scanner system. Control mode: DMX-512 signal control (with 16CH), music active, automatic run, master & slave control mode. It can be applied for the place of public entertainment such as disco, night club, TV station and theater etc.

Instructions:

After unpacking, check whether the laser lighting has been damaged by transport such as any screw loosening, lighting tube broken, etc. If everything is OK, select a proper location, hang the light and adjust its angle properly, then connect the power cord and the ground wire before switch on at the means.
This product belongs to grade-1 protective equipment. Notice that while using this laser lighting the green and yellow wire has to connect the ground properly by professionals. Please examine the electrics and voltage before power on it. Because of the radiate laser generator `s own characteristic and to secure the laser `s long life span. Please terminate it for 10 minutes after using it for 30 minutes. Avoid being interfered by other signals while controlled by Fire Phoenix software or using the DMX-512 signal controller, such as wireless interphone & high radiated source.
Technical Parameters: Rated voltage: Rated frequency: Power consumption: Laser power: Laser source: Color: Laser patterns: Scanning: Scanning angle: Control Channel Control signal: Control mode: Cool system: Operating environment: AC110V /AC230V 10 50HZ~60HZ 25 Watt 140mw solid semiconductor laser generator green/532nm, red/650nm 85 patterns 3~5kpps vibratory mirror scanner system 20 degrees 16 DMX-512 signal control channels DMX-512 international standard signal DMX-512, music active, automatic run, master & slave fan indoor

Channel `s function

Stairville DJLase 150 RGY DMX use international standard DMX-512 signal control, with 16 channels, as the below detailed descriptions : Channel Function choose DMX-512 Value CH2 Multi-functions Channel CH3 Multi-functions Channel CH4 CH5 Pattern C Pattern D Laser is off DMX pattern mode DMX SHOW edit mode DMX SHOW automatic run mode DMX SHOW music active mode Pattern mode SHOW mode Pattern mode SHOW mode Pattern mode Pattern A Laser SHOW Pattern B Laser SHOW segment Pattern C D Descriptions

1~255 0~255 1~255 1~255 0~51
Pattern mode Pattern D At the same time with Pattern A B C effects Pattern A control effect Pattern B control effect Pattern C control effect
CH6 Multi-functions Channel
52~103 104~155 156~207 208~255 0~255
Pattern D control effect 1. 0 is the function with turning off laser SHOW segment edit 1. 1~255 is the function with turning on laser SHOW segment edit

CH7 Rotation effect

1~127 128~191 192~255
Rotation angle adjustment adjustment speed Counter-clockwise rotation

the 15CH

CH8 Vertical turning

1~127 128~255

Clockwise rotation Vertical rotation linearity adjustment 15CH adjustment speed Vertical rotation speed adjustment Horizontal rotation linearity adjustment 15CH adjustment speed Horizontal rotation speed Horizontal moving speed Vertical moving speed gradual increasing drawing gradual decreasing drawing gradual increasing and decreasing Adjustment of point brightness Adjustment of vertical angle 15CH adjustment speed Adjustment of horizontal angle 15CH adjustment speed Adjustment of pattern size 15CH adjustment speed Pattern from small to big 15CH adjustment speed Pattern from big to small 15CH adjustment speed Zoom patterns 15CH adjustment speed Choose different color effect, 15CH adjustment speed CH11 CH12 CH13 CH14 effective speed adjustment
CH9 H o r i z o n t a l turning CH10 Moving effect
1~127 128~255 1~127 128~255 0~41 42~83 84~127 128~255 1~255 1~255 1~127
G r a d u a l CH11 drawing effect Point effect CH12 Vertical CH13 Horizontal
CH14 Z o o m i n / o u t effect

128~169 170~211 212~255

CH15 Control color CH16 S p e e d adjustment

0~255 0~255

Signal Connection and Address Code Dialing
When the controller outputs the standard DMX512 signal, the connection of which is accomplished through the input and output 3-pin XLR socket. When a console signal outputs to the unit, it must correspond to the Pin 1 Ground, Pin 2 Negative and Pin 3 Positive of the XLR socket on the unit. If it does not work just try exchanging the Pin 2 and Pin 3 (these 2 pins are generally do not need exchanged for consoles). The signal wire length should not exceed 100m in order to avoid the interference of the other signals by any other electric appliances. This unit adopts the 3 pins XLR socket, detail connection of many units as bellow:

If your DMX-512signal controller adopt 5 pins XLR plug, you need one transfer line, the transfer method as following:
When control signals from the console inputs into Stairville DJLase 150 RGY DMX projector. The projector must be assigned a data start address code, so that a unit may act on the corresponding control signal. Thus, when any controller is used, every unit must have its own data start address Accordingly, the address of the first unit is set as 1, the second unit has also 16 channels, so its address code is 17, the third unit is set at 33, so on and so forth (the setting method will also depend on the specific console, the above is just for general cases). Every binary system address code corresponding the decimal system number : Number numerical value
Calculation formula : light adress code = ( the N light 1 ) * the channel of light + 1 For example : the eighth lights address code = ( ) * 16+1=113,the corresponding binary system code : the second, fourth, sixth, seventh is ON, and the other is OFF. The details of DMX-512 signal control mode address switch as follow: Lamp no. Start address Control switch (ON) 6
Stairville DJLase 150 RGY DMX Laser Performer has controlled by on/off switch address code. 1 to 9 are the numerical value DMX 512 signal, 10 is the exchange switch of sound active control, automatic run, master & slave and DMX512 signal control. The detailed control mode as follow: MODE DMX-512 signal control mode music active mode automatic run mode master mode master mode Control switch (ON) 10 : ON 1-9 : address code 1 : ON others : OFF 1-10 : OFF 10:ON, 1-9:OFF

Slave mode

The skill of editing various patterns with DMX-512: 1. Pattern A B C Ds channel is controlled dividually, you can turn on or off, exchange pattern 2. When the CH2 CH3 CH4 CH5s channel address is 0, it will turn on the pattern
A B C D D simultaneously, When the CH6 is 52~103, the arbitrarily, its very convenient to use.
3. The four patterns effects controlling channel is used doublely, it is exchanged by CH6:
When the CH6 is 0~51, the pattern is A B C
pattern is A, When the CH6 is 104~155, the pattern is B, When the CH6 is 156~207, the pattern is C, When the CH6 is 208~255, the pattern is D.
Edit the DMX-512 inside laser show segment:

1 CH2 choose laser SHOW, CH3 choose the SHOW segment needed to edit, when CH6 is 0, it will
turn off SHOW segment edit , when CH6 is 1~255, it will turn on SHOW segment edit. 2 When CH6 is 1~51, the pattern is A B C D control simultaneously , When CH6 is 52~103, the pattern is A, When CH6 is 104~155, the pattern is B, When CH6 is 156~207, the pattern is C, When CH6 is 208~255, the pattern is D.
Pay attention to bellow descriptions for the master & slave control mode :
1. You can not connect to the DMX-512 controller when the master and slave projector are operating synchronously, otherwise the master and slave synchronous functions cant be realized; 2. When operating the master and slave controlling, it must be only one master projector, otherwise it can not be operated synchronously.
Master and Slave connection as bellow:

Safety marks:

Please make sure to switch off the power before installation or maintenance. Please keep the fan expedite and environment ventilated. This laser projector is designed for the indoor, so while using, please avoid any dripping. If you want to use for outdoor, please do enough waterproof measure. Before maintenances, please refer to eligible personnel Do not use any power voltage and light type of different specifications Please do not see the laser light directly, in case it might damage the eyes Avoid electric shock! Bulb overheating Do not use it frequently under the humid atmosphere
Maintenance: It is very important to keep the Stairville DJLase 150 RGY DMX laser light clean, therefore please clean reflector lens monthly to keep the lights away from dust, dirt or fog juice. We suggest that clean the light with professional glass cleaning lotion and downy cloth. Keep the light clean regularly will not only maintain the maximum laser output brightness but also will extend the life span of the laser.
all Copyrights by: Musikhaus Thomann Treppendorf 30 GER- 96138 Burgebrach Tel.: 0049/9546/9223-0 info@thomann.de www.thomann.de