STEINEL Vertrieb GmbH Dieselstrasse D-33442 Herzebrock-Clarholz / Germany Telephone + 45 / - 0 Fax +45 / -www.steinel.de info@steinel.de
8615501 Subject to technical modifications
Intelligent Light Convenience for the Home

Sensor Technology Range

Sensor Systems for Outdoors

Motion Detectors

Infrared sensors for wall mounting Page 10 13,15
IS 130-2 IS 140 IS 180-2 IS 240 IS 1

Page 6 onwards

SensorLights in impact-resistant material Page 44 47

DL 750 S L 870 S

Infrared sensor for ceiling mounting Page 14

IS 360 D

Classic SensorLights Page 48 49

L 170 S L 190 S

Infrared sensor with LED light Page 16 17

IS LED 2in1

SensorLights from 705/706 series Page 50 53
L 705 S L 715 S L 745 S L 706 S L 726 S L 746 S
Photoelectric Lighting Controllers
Page 18 onwards SensorLights in compact design Page 54 55
SensorLight SensorLight SensorLight plus 11 W plus 15 W plus 18 W
Low-energy bulb with integrated photoelectric lighting controller Page 21 - 20

L 905 S

L 935 S

L 945 S

SensorLights, starter series Photoelectric lighting controllers Page 22
Nightmatic Nightmatic Vario

Page 56 59

L 560 S L 562 S L 535 S L1
Sensor-switched halogen floodlights Low-energy light with integrated photoelectric lighting controller Page 23

Page 60 63

HS 150 HS 300 HS 500 HS 5140

SensorLights

Page 24 onwards
Sensor Systems for Indoors
SensorLights in a fascinating design for walls Page 28 31

L 305 S L 306 S L 262 S

Page 68 71

Page 64 onwards

High-frequency SensorLights for mounting on walls and ceilings
SensorLights in stainless steel for the garden and walls Page 32 33
GL 60 S L 260 S RS 10-1 L RS 100 L RS 16 L RS 16-2 L RS 16-3 L RS 13 L RS 10-3 L RS 21 L
SensorLights in traditional design for the garden and walls Page 34 35

GL 16 S AL 602 S

SensorSwitch for surface/concealed wiring Page 74 77

Page 72 onwards

SensorLights, 860-series stainless-steel edition Page 36 39
L 860 S L 867 S L 868 S L 876 S

IR 180 AP

HF 360 AP IR 180 UP

HF 360 UP NF 50 UP

Installation components Page 78
Faceplate Socket Universal switch Dimmer
House-number SensorLights Page 40 43
L 863 S L 850 S L 270 S L 271 S

Summaries

Sensor systems at a glance Page 78 79

Page 78 onwards

SensorLight for ceiling mounting Page 44 45

DL 750 S

Presentation systems Page 80 81
Success through Innovation
Steinel. The original. Products for people and the environment Intelligent energy saving. This is the vision that made STEINEL invent the world's first sensor light 20 years ago. A milestone in convenience, safety, security and saving energy. As such, everyone today can make a contribution towards cutting CO2 emissions and counteract climate change. But intelligent lighting control from STEINEL are not only good for the environment: Using less energy, you save hard cash - and light that comes 'ON' automatically brings a significant measure of added convenience to everyday routine. This way, our idea benefits people and the environment. Treat yourself to the original! Because now as ever, "made by STEINEL" is synonymous with practical functionality, quality and durability. Today, we develop and manufacture products of world renown at six locations in Europe. With German Quality. For us, making sure that applies to all stages of production means: In-house research and development with toolmaking and prototype construction. In-house production of electronics, plastics and injection mouldings. Quality management system certified to DIN EN ISO 9001 and products that carry all of the relevant test marks. Development of start-to-finish sales concepts, including presentation and merchandising. Internal warehouse logistics, from order picking to shipment world-wide. Competent field service and service hot line.
Motion Detectors for Outdoors
Switches that can see STEINEL Infrared sensors, also known as motion detectors, respond to heat radiated from moving persons and use this ability, for example, to switch a light 'ON' and, after a selectable period of time, 'OFF' again. STEINEL Infrared sensors also bring modern-day convenience to lights that are already installed. Generous reach and coverage angles of 130 to 360 for a whole range of applications. Sneak-by guard for complete surveillance. Reliable operation, even in adverse weather conditions. Twilight threshold and light 'ON' duration can be set to meet individual needs. Easy installation, even on internal and external corners. Ideal too for indoor areas, such as corridors and basement rooms.

240 130

140 360
Light comes 'ON' automatically
How does an infrared motion detector work? Any object with a temperature that lies above absolute zero (-273,15 C) emits electromagnetic radiation. Given the temperature range of the human body, this radiation lies in the infrared portion of the spectrum. Passive infrared (PIR) motion detectors use this fact. These units are equipped with highly sensitive infrared detectors that respond to the slightest fluctuation in the heat they detect by changing their voltage output. The area covered is divided up into zones by segment lenses. Heat sources moving between these segments are detected as a change in voltage and used for controlling light or other electrical loads. Sensor technology with Fresnel lens So-called Fresnel lenses provide the easiest way of segmenting and, at the same time, of widening the detection zone of an IR detector. They comprise a system of individual lenses is arranged in a circular segment. A maximum angle of coverage of 180 provides the capability of reliably watching over an area of up to 225 m2. A second optical window below the main detection zone makes it virtually impossible to sneak past underneath the sensors without being detected. Sensor technology with multi-lens STEINEL has developed multi-lens technology (MLT) for sensors that are required to meet exacting demands. This is a semi-spherical element comprising many individual lenses. This technology permits the detection of heat sources in a 360 radius and covers an area of up to 450 m2. Separate sneak-by guard is superfluous. MTL also provides the perfect basis for systems with double or triple sensors.
segment lens pyro detector angle of coverage (plane A)

Sneak-by guard (plane B)

Sensor reach STEINEL sensors generally have a max. reach of 12 m (HS 500: 20 m!) that may be shorter when crossed in a radial walking direction.
Sneak-by guard The dense, horizontal and vertical detection zone of STEINEL sensor systems makes it virtually impossible for anyone to sneak past, providing real security.

12 m max. 2m

Coverage angles of Fresnel lenses STEINEL sensors with Fresnel lenses have coverage angles of 130, 140 or 180, making them idea for targeting expansive areas.
Coverage angles of multi-lenses As a result of their wide coverage angles of 180 to 360, STEINEL sensors with multi-lenses are also suitable for keeping large areas under perfect surveillance.
180 / 2 sensors 240 / 2 sensors

The IS 180-2 combines modern, sleek design with state-of-the-art sensor technology. Two highly sensitive infrared detectors positioned at a specific angle in relation to each other provide reliable, uninterrupted protection of areas as large as 200 m2. Setting capabilities Reach can be set to a maximum of 12 m or 5 m by turning the multi-lens. Detection zone can be limited by fitting the shrouds supplied. Light 'ON' time and twilight threshold are easily set by dial. Installation advantages Clearly designed terminal compartment for fast, easy wiring.

sen syst sor em

Sen s Syst ors em
Stainless steel effect Prod. No. Dimensions (h x w x d) Output 120 x 76 x 56 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e. g. fluorescent lamp) 600 W max. (electronic ballasts, capacitive, e. g. low-energy bulb, 8 each max.) V/50 Hz 180 with 90 angle of aperture 2 basic settings: 12 m or 5 m max. lux 10 sec. 15 min. IP 54 II Including wall mounts for external and internal corners black white 603212 Prod. No. Dimensions (h x w x d) Output
black 602710 white 602819
90 x 60 x 100 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e. g. fluorescent lamp) 600 W max. (electronic ballasts, capacitive, e. g. low-energy bulb, 8 each max.) V/50 Hz 240 with 180 angle of aperture 80 precision adjustment of sensor housing 12 m max. (temperature-stabilised) lux 10 sec. 15 min. IP 54 II Corner mount 01 for installation on external corners 630119 black 630218 white
Voltage Angle of coverage Reach Twilight setting Time setting Enclosure Protection class Accessories
Arranged in segments, the sensor lens is visibly divided into two detection zones. Two basic reach settings of 12 m max. or 5 m can be preselected simply by turning the multi-lens.
Voltage Angle of coverage Adjustment range Reach Twilight setting Time setting Enclosure Protection class Optional accessories Prod. no.

approx. 200 m /40 m

12 m max.

230m/ 2 sensors

2 basic reach set- Detection zone tings possible
Multi-lens technology for perfect detection

Coverage angle reduction

Setting functions Detection zone Coverage angle Multi-lens technology for perfect detection Coverage angle reduction Setting functions

Infrared Sensors for Wall and Ceiling Mounting

IS 360 D TRIO

Infrared ceiling sensor, ideal for uninterrupted, all-round detection under ceilings, porches, carports, overhanging roofs or balconies. The IS 360 D TRIO is equipped with three highly sensitive infrared detectors positioned a specific angle in relation to each other to provide reliable, uninterrupted allround protection of areas as large as 350 m2 beneath it. Setting capabilities Detection zone can be limited by fitting the shrouds supplied. Light 'ON' time and twilight threshold are easily set by dial. Installation advantages Clearly designed terminal compartment for fast, easy wiring.

Best Price

Costs less than most people think. Perfected technology and upmarket design needn't cost a fortune. The latest case in point: The IS 1 provides outstanding value for money that more than meets the challenges in this segment. Setting capabilities The tilting and swivelling sensor lens permits exact adjustment of the detection zone to suit individual requirements. Light 'ON' time and twilight threshold are easily set by dial.
Installation advantages Clearly designed terminal compartment for fast, easy wiring. Suitable for mounting on walls or ceilings. Turns in two directions.

ceiling

black Prod. No. Dimensions (h x w x d) Output 602512 white 602611 Prod. No. Dimensions (h x w x d) Output
white black e.g. x 80 x 120 mm W max.(resistive load, e.g. filament bulb) W max. (uncorrected, inductive, cos = 0.5) W max. (electronic ballasts, capacitive, low-energy lamp, 4 lamps max.)
100 x 120 x 120 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e. g. fluorescent lamp) 600 W max. (electronic ballasts, capacitive, e. g. low-energy bulb, 8 each max.) V/50 Hz 360 with 180 angle of aperture 10 precision adjustment of lens 12 m max. (temperature-stabilised) lux 10 sec. 15 min. IP 54 II
Voltage Angle of coverage Reach Twilight setting Time setting Enclosure Protection class
V/50 Hz m max. lux 8 sec. 35 min. IP 54 II
350m/ 3 sensors 12 m max. 12 m max.

120 2m 10 m max.

Coverage angle

Setting functions

Angle of coverage: 120

Perfect detection

180 vertically
30 horizontally Reducing the angle of coverage
Sensor Systems for Outdoors IS LED
Infrared Sensor with LED Light
The world has never seen anything like this before. The IS LED combines timeless, aesthetic design with practical benefits. Just like any other motion detector, for instance, it switches an external light 'ON' and 'OFF' again. At the same time, though, the IS LED is also a house number illuminated by LEDs. This unique, practical and stylish combination can be used for all sorts of applications. This is how they work Three LED function programmes geared to practical needs: 1. 'ON' at twilight threshold, all night 2. 'ON' at twilight threshold to the middle of the night 3. 'ON' when movement is detected When movement is detected, the light connected switches 'ON' and 'OFF' again independently of the programme. Manual override (4h) can be selected at a mains power switch connected to the light. Setting capabilities Detection zone of motion detector can be limited using the shrouds provided. Easy, convenient selection of light 'ON' time, twilight threshold and programme on removable sensor module.

SOR SW SEN IT

SYSTEM ING CH

11 W white Prod. No. Dimensions (h x w x d) Voltage Twilight setting Lampholder Frequency Number of photosensors
(Light dependant resistor)
15 W white x 58 x 58 mm V lux E 27 50/60 Hz
1 photosensor with 3 photometric measurement fields
18 W white x 58 x 58 mm V lux E 27 50/60 Hz
x 58 x 58 mm V lux E 27 50/60 Hz
Long service life Lumens Enclosure Protection class
approx. 15.000 hrs 600 IP 30 II
approx. 15.000 hrs 900 IP 30 II
approx. 15.000 hrs 1100 IP 30 II

MATIC -AUTO Night

100 W 60 W

18 W 11 W

Low-energy Light with integrated Photoelectric Lighting Controller

NightMatic

Ideal for controlling lighting systems used for illuminating building fronts, premises, shop windows or other areas.

NightMatic 3000 Vario

NightMatic 2000
Ideal for permanent night light around the home. The LN 1 combines exceptionally stylish design with a high level of functionality. An extremely slimline profile makes it a real looker wherever it's installed. Needless to say, the 11 W low-energy bulb is included and provides perfect illumination in the evening when light levels fall to the twilight setting selected. The light then switches 'OFF' automatically at dawn. Setting capabilities Easy adjustment of twilight threshold by control dial.
This is how they work The NightMatic 2000 registers ambient brightness, automatically switching 'ON' connected lights when the twilight threshold is reached at dusk and 'OFF' again at daybreak. The microprocessor controlled NightMatic 300 Vario even goes a step further. With its Vario night economy mode, it also helps to save electricity. If you wish, it will automatically switch a light 'OFF' at night after a programmable period of time and then back 'ON' again in the morning at about 5 a.m. if it's still dark.
IMPACT-RESISTANT MATERIAL
Twilight setting 0.lux. Variable night-time shut-down (night economy mode) approx. 10 p.m. 5 a.m. Compensates for its own light, i. e. operation is not impaired by another light in the vicinity.

Twilight setting approx. lux.
Twilight setting 5 - 200 lux
Installation advantages Clearly designed terminal compartment for fast, easy wiring. Includes house numbers and low-energy bulb. Can be mounted horizontally or vertically, on wall or ceiling, indoors or outdoors.

AN / ON

a.m. 18 Uhr

20 Uhr a.m.

black x 74 x 37 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e.g. fluorescent lamps) 230-240 V/50 Hz approx. 2 - 10 lux < 0.8 W IP 54 II white 550417 Prod. No. Dimensions (h x w x d) Output Voltage Twilight setting
white x 195 x 53 mm 11 W max./ 2G7 (twin-tube low-energy bulb) V/50 Hz lux IP 54 II IK 7 -20 C to 40 C
black Prod. No. x 74 x 37 mm Dimensions (h x w x d) Output
Night economy mode Nachtsparmodus

white 550615

22 Uhr 10 p.m.
1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e.g. fluorescent lamps) V/50 Hz approx. 0.lux / at press of button variable night-time shutdown < 0.8 W IP 54 II
Voltage Twilight setting Night economy mode Power consumption Enclosure Protection class
ATIC UTOM A NightAUS / OFF
Enclosure Protection class Impact resistance Ambient temperature

a.m. 5 Uhr

7 Uhr a.m.
Setting capabilities NightMatic 3000 Vario Chosen response threshold easily selected at the press of a button (2). A control dial (4) permits infinitely variable adjustment of how long you want connected loads to switch 'OFF' automatically during the night (night economy mode).

(1) Light sensor

Main uses at a glance
(2)Button for setting chosen twilight threshold (3) LED (4)Setting length of night economy mode
SensorLights for Outdoors
Light comes 'ON' automatically STEINEL sensor lights provide the easiest way of bringing contemporary lighting to your home and garden. Equally as simple to install as conventional lights, but bristling with cutting-edge sensor technology, they automatically switch the light 'ON' after dark when they detect a moving heat source. When they stop detecting movement, they switch the light 'OFF' again after a programmed time. STEINEL sensor lights are available in many different shapes and designs. This way, you're sure to find the right model to suit your particular style. Security, convenience and energy saving because light comes 'ON' automatically. In different styles from classic to modern. Also available as wall, ceiling or free-standing lights. Reliable operation. Easy to install. Glass shade availability guaranteed for 5 years.

Installation advantages Models GL 60 S come with a two-part foot. For use as a bollard light, the lower part removes.
Reach Twilight setting Time setting Manual override Brightness control Enclosure Protection class
The G 9 adapter modules, exclusively from STEINEL! In order to achieve a long and evenly illuminated glass shade, these sensor lights are supplied with the innovative G 9 modules a real world first - including halogen lamps.
Main features of GL 60 / S:
Main features of the L 260 S:
approx. 230 m2 approx. 450 m2
SensorLights in traditional design
Elegant, old-fashioned style sensor lights in die-cast aluminium. Ideal as wall, freestanding or bollard lights for gardens, drives or pathways. Their stylish, elegant design is just as reminiscent of the good old days as the handblown crystal shade and use of high-quality material: these lights are crafted from highly resistant, coated die-cast aluminium. The electronics are anything but old-fashioned.

AL 602 S

GL 16 S
Setting capabilities The detection zone can be adjusted exactly to protection requirements at the site of installation by means of tilting, turning lenses and can also limited using the shrouds provided. Exact time and twilight settings by means of control dial.
Three-switch function on the light: Manual override / 'OFF' / sensor mode Height can be varied by shortening the stem Hand-blown, bubbleeffect crystal glass
Permanent operation with adjustable basic brightness (Watt-o-matic) Multi-lens technology for large detection zone
black Prod. No. Dimensions (h x w x d) Output Voltage Angle of coverage Adjustment range Reach Twilight setting 617219 white 617318
black 617011 white 617110
480 x 210 x 395 mm 100 W max. / E 240 V/50 Hz 360 with 120 angle of aperture 45 horizontally, 40 vertically 12 m max. lux 10 sec. 15 min. % (Watt-o-matic) IP 44 I
1000 x 260 x 260 mm 100 W max. / E 240 V/50 Hz 180 with sneak-past guard 35 vertically 12 m max. lux 10 sec. 15 min. IP 44 II 2 m extension tube available
Watt-o-matic (AL 602 S only)
Permanent lighting can be provided at night thanks to a basic brightness that can be set to any level between 0and 50%. The light switches to full brightness as soon as someone enters the detection zone. Installation advantages (GL 16 S only) The height of the lamp can be reduced by shortening the aluminium tube. Can also be used on top of walls with the tube shortened to 10 cm.

Brightness control Enclosure Protection class Optional accessories

360 / 1 sensor

approx. 150 m2

approx. 225 m2

Swivel adjustment Coverage angle reduction
Sensor Wall Lights, 860-Series

Stainless steel edition

The sensor wall lights from the stainless steel edition combine modern, sleek design with cutting-edge sensor technology for maximum convenience, security and economy. Ideal for home and garden. Featuring trim panels in high-quality stainless steel and hand-blown opal glass shades for soft light distribution, they are sure to provide effective lighting outside your home. Select one of the attractive design options to suit your particular style of living. There are three hand-blown glass shades and five differently designed stainless steel trim panels to choose from. The innovative microprocessor control system provides superb operating convenience and functions that leave you wanting for nothing. L 868 S Soft light start and soft end The innovative soft light start function from STEINEL gently and elegantly takes light bulbs to 100 % output and switches them down to 0 % output in the same way too. This not only looks good, it prolongs bulb life too. Manual override If you want full brightness over a prolonged period (e.g. for a garden party), you can actuate a connected power switch twice in brief succession to set the light to stay 'ON' all the time (4 h). Brightness control (Watt-o-matic) Basic brightness that can be set to between % allows you to create permanent lighting full of atmosphere at night. When movement is detected, the light switches to full power for the time selected. Setting capabilities Reach can be set to a maximum of 12 m or 5 m by turning the multi-lens. Detection zone can be limited by fitting the shrouds supplied. Comfort function buttons for accurately setting light 'ON' duration and twilight threshold as well as for controlling brightness. STAINLESS STEEL
Installation advantages Screwless shade attachment by means eccentric fitting. No tools required for changing bulb. Easy to install. Electronic overload protection.

L 860 S

L 867 S

L 868 S

L 876 S
With stainless steel trim panel Hand-blown Triopal glass shade
With slotted stainless steel trim panel Hand-blown Triopal glass shade
With stainless steel trim panel Hand-blown, matt opal glass shade
Stainless steel trim panel Prod. No. Dimensions (h x w x d) x 222 x 105 mm Prod. No. Dimensions (h x w x d)
Stainless steel trim panel x 208 x 107 mm
slotted stainless steel trim panel x 208 x 107 mm

Stainless steel trim panel x 141 x 161 mm

860 Series

Output Voltage Angle of coverage Reach Twilight setting Time setting Brightness control Manual override Enclosure Protection class 100 W max. / E 240 V/50 Hz 180 with 90 angle of aperture 2 basic settings: 12 m max. or 5 m (temperature-stabilised) lux 5 sec. 15 min. % (Watt-o-matic) 4 hrs. selectable IP 44 II
Main features of the 860-series at a glance
approx. 200 m2/40 m/ 2 sensors
2 basic reach settings possible
Turning multi-lens Coverage angle reduction

Comfort function buttons

Manual override 2 x 'OFF'/SENSORLIGHTS
House Number SensorLights, 850/860-Series
House number SensorLights, stainless steel edition
House number lights with trim panels in highquality stainless steel. The hand-blown opal glass shades provide soft light distribution, impressively setting off entrance areas. This is how they work Basic brightness can be adjusted from 0 50% (Watt-o-matic). The integrated soft light start feature creates a pleasant lighting effect and prolongs the life of the bulb by gradually increasing brightness to full output over a period of one second when the light is switched 'ON'. The electronics are equally as gentle 'ON' the light when it is switched 'OFF' (L 863 S). Manual override (4 h) at power switch (L 863 S).

L 850 S

L 863 S
STAINLESS STEEL Setting capabilities Reach can be set to a maximum of 12 m or 5 m by turning the multi-lens. Detection zone can be limited by fitting the shrouds supplied. Light 'ON' time and twilight threshold easily adjusted using comfort function buttons (L 863 S) or control dials (L 850 S).
Designer-style trim panel in stainless steel Hand-blown Triopal glass shade
Designer-style trim panel in stainless steel Soft light start Manual override (4 hrs. selectable) Hand-blown Triopal glass shade
Brightness control (Watt-o-matic) STEINEL Watt-o-matic permits permanent illumination at night with a basic brightness that can be adjusted to between 0 and 50 % to suit individual requirements. The sensor light then shows the way even when there's no-one in the detection zone. The Watt-omatic is ideal for house number lights: the dimmed light makes the house number easy to read at all times. As soon as anybody enters the detection zone, the electronics switch to full output for the period set % on the timer. Installation advantages Supplied with self-adhesive numbers for use as house number light. Bulb can be changed without tools thanks to glass shade with eccentric fitting. L 850 S

Output / light bulb Voltage Angle of coverage Reach Twilight setting Time setting Brightness control Manual override Enclosure Protection class 2 x 40 W max. / G 9 including LED back-lit glass panel, approx. 1 W V/50 Hz 360 with sneak-by guard 8 m max. all-round lux 5 sec. 15 min. 0 % or 25 % (Watt-o-matic) 4 hrs. selectable IP 44 I

Ceiling SensorLights

Light From the Top. Automatically
High-quality ceiling sensor light featuring state-of-the-art multi lens technology from STEINEL for all-round coverage of areas under porches, wall projections, garages or carports. Featuring a housing base in high-quality, long-life die-cast aluminium and handblown opal glass shades or impactresistant acrylic glass shades, the DL 750 S provides soft light distribution and energy-saving illumination. This is how they work Basic brightness can be adjusted from 0 50% (Watt-o-matic). When movement is detected, the light switches to full power for the time selected. The integrated soft light start feature creates a pleasant lighting effect and prolongs the life of the bulb by gradually increasing brightness to full output over a period of one second when the light is switched 'ON'. The electronics are equally as gentle 'ON' the light when it is switched 'OFF'. Setting capabilities Detection zone can be limited by fitting the shrouds supplied. Control dials for easy adjustment of light 'ON' time, twilight threshold and brightness. Installation advantages Bulb can be changed without tools thanks to glass shade with bayonet fitting.
Hand-blown opal glass shade
Unbreakable acrylic glass shade
white/ opal glass shade Prod. No. 650315
white/ acrylic glass shade 650414
DL 750 S opal/acrylic glass shade
Dimensions (h xwxd) Output Voltage Angle of coverage Reach Twilight setting Time setting Brightness control Manual override Enclosure Protection class 135 x 315 x 315 mm 100 W max. / E 240 V/50 Hz 360 with 180 angle of aperture 12 m max. all round (temperature-stabilised) lux 5 sec. 15 min. % (Watt-o-matic) 4 hrs. selectable IP 44 I

approx. 350 m2

Brightness control Shrouds for reduc- as well as the (Watt-o-matic) ing reach detection zone
Impact-resistant Sensor-switched Wall Light
SensorLights in impact-resistant material
Ideal solution for an energy-saving security lighting in areas exposed to the threat of vandalism. The caged sensor and a plastic shade in impact-resistant, extremely sturdy polycarbonate material reliably protect cutting-edge STEINEL multi-lens technology from the use of force and prevent injury from shattered glass. Sloping upwards, the trim panel prevents anyone from standing objects on it or covering the sensor. The integrated soft light start feature creates a pleasant lighting effect and prolongs the life of the bulb by gradually increasing brightness to full output over a period of one second when the light is switched 'ON'. The electronics are equally as gentle 'ON' the light when it is switched 'OFF'. Manual override (4 h) selectable via mains switch. Setting capabilities Detection zone can be limited by fitting the shrouds supplied. Comfort function buttons protected under the trim panel for precision adjustment of light 'ON' time, twilight threshold and brightness.

Setting capabilities This is how they work Detection zone can be limited by Four function programmes geared to fitting the shrouds supplied. practical needs with soft light start as well as 25 % basic brightness (WattEasy, convenient adjustment of light o-matic) leave you wanting for noth'ON' time, twilight threshold and ing (see description on page 26 27). programme selection on removable sensor module. (see description on Manual override (4 h) via mains page 26 27). switch.
black Prod. No. Dimensions (h x w x d) 651015 white 651114
black 651619 white 651718
black 651817 white 651916

291 x 210 x 180 mm

303 x 126 x 138 mm

305 x 196 x 170 mm

905-series
Output / light bulb Voltage Angle of coverage Reach Twilight setting Time setting Brightness control Manual override Enclosure Protection class 100 W max. / E 27 (also suitable for low-energy bulbs) V/50 Hz 360 with sneak-by guard 8 m max. all-round lux 5 sec. 15 min. 0 % or 25 % (Watt-o-matic) 4 hrs. selectable IP 44 II
Sensor-switched Wall Lights, Starter Series

560 Series

Sensor wall lights of unadorned, classic design with tried and proven technology for home and garden.

L 560 S

L 562 S
Each of these lights is available either in black or white. Hand-blown by craftsmen, the glass shades lend each of these lights their own particular identity. In addition to shade design, there's also the classic lantern style to choose from.
Setting capabilities The detection zone can be adjusted exactly to protection requirements at the site of installation by means of tilting, turning Fresnel lens and can also limited using the shrouds provided. Easy adjustment of light 'ON' duration and twilight threshold by control dial. Hand-blown, bubbleeffect crystal glass Hand-blown glass shade
black Prod. No. Dimensions (h x w x d) Output Voltage Angle of coverage Adjustment range Reach Twilight setting Time setting Enclosure Protection class W max./ E 240 V/50 Hz 140 horizontally with sneak-by guard 130 horizontally, 65 vertically 12 m max. lux 10 sec. 15 min. IP 44 II white 634315
black W max./ E 240 V/50 Hz 140 horizontally with sneak-by guard 130 horizontally, 65 vertically 12 m max. lux 10 sec. 15 min. IP 44 II white 634711

368 x 215 x 243 mm

410 x 200 x 260 mm

L 560 S / L 562 S

140 / 1 sensor approx. 150 m2
Simply stylish and practical in many ways.
The quality and experience of the market leader in a simple but stylish SensorLight. This is the mark of an effective way to watch over areas as large as 105 m2. The practical part about it: In its lowermost position, the sensor can be used for detecting movement along the wall of a building. Setting capabilities The tilting sensor lens permits exact adjustment of the detection zone to suit individual requirements. Light 'ON' time and twilight threshold are easily set by dial. Installation advantages Clearly designed terminal compartment for fast, easy wiring. Complete with self adhesive numbers for use as house number light.

Detach decorative Twilight, time ring setting

Function settings

HF-SensorLights for Indoors
Indoor lighting convenience With STEINEL SensorLights, light is switched 'ON' and 'OFF' as people come and go. Reliably, quickly and, above all, automatically. Cutting-edge high-frequency sensors invisibly concealed inside the light reliably and instantly respond to the slightest movement or change in light levels. Security, convenience and energy saving because light comes 'ON' automatically. Available as wall or ceiling lights in many different designs. Response light level, light 'ON' time and reach can be adjusted to suit individual requirements. Reliable operation. Straightforward installation: Light and sensor = 1 connection Glass shade availability guaranteed for 5 years.
High-frequency SensorLights for Wall and Ceiling Mounting
High-frequency sensors respond faster Wherever there are people, there is movement. This fact makes motion sensors the ideal cornerstone for intelligent light switches. STEINEL high-frequency (HF) sensors identify movement instantly without any restriction to "sensitivity" through ambient temperature and direction in which the object being detected moves. High-frequency sensors actively scan the detection zone. To do this, they emit signals and receive the echo reflected off walls and surrounding objects a moment later. Any movement is instantly detected and the light is switched 'ON'. What's more, there's no more forgetting to switch the light 'OFF'; the light does that for itself. STEINEL high-frequency sensors operate at 5.8 GHz. As glass and thin walls do not get in the way of these signals, the sensors can be fitted inside the light, making them invisible from the outside. This way, nothing spoils the attractive design of STEINEL SensorLights. At approx.1 mW, their power output is about 1000 times less than that of a mobile phone. All of these qualities make the STEINEL HF sensor the perfect solution for automatic indoor lighting. An innovation from STEINEL the original.
Convenience, safety, lower costs Employing state-of-the-art high-frequency sensors to control interior lights as and when they're needed, STEINEL has heralded in a new era of lighting automation. STEINEL HF SensorLights are designed specifically for indoor spaces, such as corridors, hallways, kitchens and bathrooms. They can be wall and ceiling-mounted.

2,50 m 18 m 18 m 1,75 m

The 360 detection zone with an aperture angle of 160 and reach of up to 8 m reliably watches over rooms as large as 50 m2.
Reach setting STEINEL HF sensor lights can detect movements across a diameter of 1 to 8 m. You can infinitely vary the reach you require using the system's electronics.
Time setting STEINEL HF sensor lights are equipped with a timer that makes sure the light stays switched 'ON' for a selectable period of time even after a temporary movement in the detection zone. The time you want the light to stay 'ON' for can be adjusted to any setting between 5 sec and 15 min.

DQS-certified to DIN EN ISO 9001: 2000
Testing lines and long-term tests You can rely on STEINEL brandname quality. Before a product goes into mass production, it is required to undergo comprehensive and rigourous testing to verify its dependability and suitability for day-today use.

Sensor Systems for Outdoors

Motion Detectors

Infrared Sensors for Wall Mounting Page 18 23, 25
IS 130-2 IS 140-2 IS NM 360 IS 180-2 IS 240 IS 1
Page 14 onwards Classic SensorLights for the Wall Page 56 65
L 706 S L 726 S L 746 S L 15 L 560 S L 562 S L 115 S L 535 S L1
Infrared Sensor for Ceiling Mounting Page 24

IS 360 D

SensorLights for Ceiling Mounting Page 66 69
DL 750 S LED Halogen DL 850 S
Infrared Sensor with LED Light Page 26 27

IS LED 2in1

Sensor-Switched Floodlights Page 70 75
XLed Home 1 HS 150 HS 300 HS 500 HS 5140
Photoelectric Lighting Controllers
Photoelectric Lighting Controllers Page 30

Page 30 onwards

Sensor Systems for Indoors
Nightmatic Nightmatic Vario

SensorLights

Low-Energy Light with Integrated Photoelectric Lighting Controller Page 31

Page 76 onwards

High-Frequency SensorLights for Wall and Ceiling Mounting Page 82 85
Low-Energy Lamps with Integrated Photoelectric Lighting Controller Page 32 33
SensorLight SensorLight SensorLight plus 11 W plus 15 W plus 18 W

RS 10-1 L

RS 100 L

RS 16 L

RS 16-2 L

RS 16-3 L RS 13 L

RS 10-3 L

RS 21 L

High-Frequency SensorLights for Bathrooms and Hallways Page 86 87
BRS 60 L BRS 61 L BRS 65 L BRS 66 L
SensorLights with Effect LED Page 36 39
Page 34 onwards High-Frequency SensorLights for Garages, Corridors and Basements Page 88 89
L 265-5 L 265 S L 270 S L 271 S

FRS 20

FRS 30
SensorLights for the Wall Page 40 47
L 330 S L 331 S L 306 S L 309 S L 262 S L 11 L 12

Page 90 onwards

SensorSwitches for Surface/Concealed Installation Page 92 95
IR 180 AP HF 360 AP IR 180 UP HF 360 UP NF 50 UP
Stainless-Steel SensorLights for the Wall Page 48 51
L 860 S L 867 S L 876 S L 170 S L 190 S
Installation Components Page 95
Faceplate Power socket Universal switch Dimmer
Stainless-Steel SensorLights for Gardens and Walls Page 52 53

GL 60 S L 260 S

Overviews
SensorLight for the Garden Page 54 55

GL 16 S

Page 96 onwards
Sensor Technology at a Glance Page Presentation Systems Page 98 103
Highlights for People of Today
Steinel. The original. Products for People and the Environment Intelligent energy saving. It was with this vision that STEINEL invented the world's first SensorLight over 20 years ago. A milestone in convenience, safety, security and saving energy. As a result, everyone today can help reduce CO2 emissions and slow down climate change. Yet with intelligent lighting control from STEINEL, you're not only doing the environment a favour: Using less energy saves you money and light that switches 'ON' automatically brings significantly more convenience to everyday life. This way, people and the environment benefit from our idea. Treat yourself to the original! Because "made by STEINEL" is synonymous with practical functionality, quality and long life. As brand and technology leader, we develop and manufacture products of world renown at five locations in Europe. In German Quality. Our strength the benefits to you: In-house research and development with toolmaking and prototype construction. In-house production of electronics, plastics and injection mouldings. Quality management system certified to DIN EN ISO 9001 and products that carry all of the relevant test marks.
Brand with responsibility
Technology for life We develop products that benefit people. This mission statement also includes our ecological responsibility. For instance, intelligent STEINEL sensor technology ensures maximum energy efficiency in lighting applications, significantly easing the strain on the environment. And we also pay strict attention to ecological compatibility in developing and manufacturing our products. To this end, we have established a uniform standard at all STEINEL sites across the globe incorporating all relevant national and international guidelines. Among other aspects, this also implements the comprehensive RoHS guideline on the restriction of the use of certain hazardous substances in electrical and electronic equipment. As part of its product responsibility, STEINEL is also involved in implementing the German Electrical and Electronic Equipment Act (ElektroG).

Quality management system
DQS-certified to DIN EN ISO 9001: 2008
Quality For Steinel, German quality is a challenge and a commitment. We meet this commitment with expertise from over 50 years of manufacturing practice and our own factories in Europe. With every day that passes with every item we produce. Quality made in Europe. This is why it goes without saying that our products carry a 36-month guarantee on proper working order. And, of course, STEINEL has been awarded certification under the current standard on quality management.
To us, responsibility is a commitment that covers all parts of our company and everything it does: product quality, innovation, service and sustainability.
Innovation Our strength is innovation. We not only invented the sensor light but continue to play a key part in constantly improving its technology. Watt-o-matic, mini-sensor, the HF-sensor system and the use of highly efficient LED technology are just some of the forward-pointing innovations that distinguish STEINEL as a pace-setter in energy-saving lighting concepts. In-house development and design ensure that we will remain technology and brand leader in energy-efficient lighting concepts in the future too.
Service As a quality-focused brand manufacturer, we attach importance to first-class service. We will be pleased to provide you with help and advice on any matter concerning sensor technology. Also typical STEINEL is the guaranteed availability of replacement glass shades over a period of 5 years. Our own merchandisers and trained sales representatives provide optimum support at the point of sale, for an effective replacement-part and repair service that guarantees maximum customer satisfaction. A hot line is available for urgent matters (+49 (0)188). Sustainability We take our responsibility seriously. For STEINEL, adhering to European legislation and work regulations at all of our factories for the well-being and protection of staff and the environment goes without saying. On top of this, we keep transport distances short to reduce CO2 emissions and ensure that on reaching the end of their useful life products are disposed of in a way that is kind on the environment. Plastics are recycled wherever possible. Not least, we use plastics and components that last for a long product life to ease the strain on the environment.

Mission to Save Energy

The optimum solution for any situation

g avin

Energy-saving sensor technology from STEINEL can be used wherever light is needed. Whether indoors or out, spot lighting or illuminating large spaces: Using the sensor products from the brand and technology leader, environment-friendly lighting is achievable here and now. This way, everyone can help to make a better future.
Light only when it's needed.
About 19 % of the energy used world-wide goes on lighting. This equates to an annual demand of about 2,650 terrawatt-hours. Much of this gigantic amount is wasted partly by leaving lights switched 'ON' unnecessarily. With sensor technology from STEINEL, wasting this resource is a thing of the past: Light comes 'ON' automatically when you enter a room. And switches 'OFF' again when you leave. What's more, using low-energy lamps with our sensor lights is not a problem either. This way, lighting from STEINEL helps to save huge quantities of energy, CO2 emission and costs. Besides this: Lights that switch 'ON' automatically enhance everyday convenience, safety and security. That's "intelligent energy saving".

Intelligent Energy S

www.energieclevernutzen.de
Light 'ON'. Light 'OFF'. Controlled by sensor.
You will also find a program on our website that can calculate energy savings exactly.

Principle

Light 'ON'. Light 'OFF'. Sensor-controlled
Automatic lights are created by using motion sensors. This is where two different technologies are employed: HF-sensors (see page 76) are the ideal solution for indoors. Outdoors, only passive infrared (PIR) sensors are used. Heat radiated from the human body Any object with a temperature above absolute zero (-273 C) gives off electromagnetic radiation. Given the temperature range of the human body, this radiation lies in the infrared portion of the spectrum. It is used by infrared sensors to detect people moving.

Segment lenses

Multi-lenses STEINEL sensors with multi-lenses provide a coverage angle of 180, 240 or 360.
180 / 2 sensors 240 / 2 sensors 360 / 3 sensors
STEINEL multi-lens technology Multi-lens technology (MLT) provides uninterrupted coverage of a semi-spherical detection zone. This makes it the ideal lens system for motion detectors with double or triple sensors.
Heat radiation as a remote controller The heart of a PIR sensor system is what's called a pyro-sensor. This electronic component responds to any fluctuation in incident infrared heat radiation with a change in voltage. As all individuals give off infrared radiation through body heat, they automatically change the thermal image detected by the sensor on entering the system's field of vision. The sudden rise in voltage this causes is processed by the electronics for switching 'ON' light. For sensor systems to respond to movements within the detection zone, they are equipped with a segment lens. This divides the pyrodetector's field of vision into active and passive zones (zones not visible to the sensor). When a heat source crosses a zone boundary, the IR radiation received changes for the sensor which then emits a signal. Active area

Segment lens

Pyro-sensor Detection angle Fresnel lenses L 562 Fresnel lenses provide the simplest means of segmenting the detection zone of an infrared detector. A system of individual lenses is arranged here in the form of an arc. With a maximum coverage angle of 180, they can watch over an area of up to 225 m2. A second optical window below the main detection zone makes it virtually impossible to creep past underneath the sensors without being detected.
Fresnel lenses STEINEL sensors with Fresnel lenses provide a coverage angle of 130, 140 or 180.
130 / 1 sensor 140 / 1 sensor 180 / 2 sensors

Passive area

Multi-sensor technology STEINEL has developed the multisensor system for applications placing particularly exacting demands on the size of the detection zone. Within the system, two or even three pyro-sensors are positioned at a specific angle to each other that adds their detection zones together.
The segment lens focuses IR radiation from its surroundings onto the sensor and divides the areas covered in active and passive zones (zones masked out for the sensor). The boundary between these zones forms what is called a switching zone as the sensor registers any person or
object crossing this boundary as a fluctuation in radiation and emits a signal. The segment lenses used are simple Fresnel lenses or STEINEL's high-performance multi-lens.
Reach in relation to the direction of movement
radial movement tangential movement
Reach STEINEL sensors generally provide a max. reach of 12 m that may be shorter when walking in a radial direction (towards the sensor).
Multi-sensor technology increases the size of the detection zone by means of two (illustrated) or three identical pyro-sensors within the system.

approx. 5 m 12 m max.

Mini-sensor

Functions

Setting capabilities
Adjustment range STEINEL sensors with a coverage angle of less than 180 are equipped with lenses that can be tilted and turned for exact adjustment to the situation at the point of installation. Shrouds All sensors come with shrouds that can be cut to size for limiting detection zones (e.g. next to neighbouring property / roads). Twilight setting A control dial can be used for infinitely varying brightness threshold from 2 lux (night) to 2000 lux (day). This prevents light from coming 'ON' unnecessarily during the day. Time setting Adjustable to any period from 5 sec. to 15 min. to suit specific needs. After detecting movement, the light stays 'ON' for the period selected.

5 Sek.15 Min.

Mini-sensor: Elegant, efficient and intelligent
Developing the mini-sensor, STEINEL has adopted a whole new approach to creating PIR sensor systems. A spherical segmented mirror guides ambient IR radiation onto a state-ofthe-art and extremely efficient IR sensor chip. This configuration not only makes it possible to keep the system extremely small, it also permits the reliable detection of movement in a full 360 circle. The new operating concept To permit rapid, intuitive adjustability of the sensor electronics to individual user needs, the entire sensor module can be taken out of the light, set in your own time, plugged back in again and securely locked in place. While settings are being made, the light switches itself 'ON' as soon as the sensor is removed. This is practical at twilight or during the night. All of the information you need to know is printed in the sensor module itself, obviating the need for any operating instructions. Programme selector switch

L 265-5

Plug and save The mini-sensor module plugs in and can be removed for conveniently setting the light's functions.
Twilight setting Time setting
The function programmes Standard programme (pre-set) for light bulbs: Light soft start/soft end, no basic brightness at dusk. Comfort programme for light bulbs: Light soft start/soft end, 25% basic brightness at dusk. Comfort economy programme for light bulbs: Light soft start/soft end, 25% basic brightness up to midnight (the middle of the night is determined by the solar cycle measured). Low-energy lamp programme: Light 'ON' in response to movement, light 'OFF' again after time set. No soft start, no basic brightness.

22000 Lux

Watt-o-matic (brightness control) Provides the capability of adjusting basic brightness from 0 50% of SensorLight output. When movement is detected, the SensorLight switches to full power. Shows the way from a distance and frightens off uninvited guests. Soft light start and soft end
Innovative and efficient The mini-sensor's outstanding properties are achieved by the spherical segmented mirror and the state-of-the-art quadruple pyro-sensor.

Elegantly increases output from the lamp in the SensorLight to 100% power. That's kind on the eye and helps to prolong lamp life! Manual override Many of STEINEL's SensorLights can be set to stay 'ON' permanently for 4 hours by operating a switch twice. Afterwards, the light automatically returns to sensor mode.

4 Std./h

Motion Detectors for Outdoors
Switches that can see Steinel Infrared sensors respond to heat radiated from moving persons and use this ability, for example, to switch a light 'ON' and, after a selectable period of time, 'OFF' again. STEINEL infrared sensors also bring modern-day convenience to lights that are already installed. Generous reach and coverage angles of 130 to 360 for a whole range of applications. Sneak-by guard for complete surveillance. Reliable operation, even in adverse weather conditions. Twilight threshold and light 'ON' duration can be set to meet individual needs. Easy installation, even on internal and external corners. Ideal too for indoor areas, such as corridors and basement rooms.
The Right Sensor for my Home

For walls

For ceilings

IS 180-2 Page 22

IS NM 360 Page 20/21

IS 360 D Page 24

Designation

rou n d

IS 180-12 m max.
IS NM 8 m all round 240 m2
Designation Angle of coverage: Reach For areas as large as

IS 360 D m max. 350 m2

Angle of coverage Reach
For areas as large as 200 m2

For house corners

IS 130-2 Page 18

IS 140-2 Page 19

IS 240 Page 23
Designation Angle of coverage Reach

IS 130-12 m max.

IS 140-14 m max. 239 m2

IS 12 m max. 230 m2

For areas as large as 150 m2
Infrared Sensors for Wall Mounting

IS 130-2

Facelift for the top-selling sensor. Infrared sensor, ideal for watching over areas in front of the home and in driveways. The IS 130-2 is the attractively priced gateway to the world of motion-activated switching that offers tried and proven technology for outstanding detection quality in a new design. It reliably watches over areas of up to 150 m2. Setting options The tilting and swivelling multi-lens permits exact adjustment of the detection zone to suit individual requirements. Simple adjustment of light 'ON' time and twilight threshold by control dial. Installation advantages Clearly designed terminal compartment for fast, easy wiring.

Costs less than most people think. Perfected technology and upmarket design needn't cost a fortune. The latest case in point: The IS 1 provides outstanding value for money that more than meets the challenges in this segment. Setting options The tilting and swivelling sensor lens permits exact adjustment of the detection zone to suit individual requirements. Simple adjustment of light 'ON' time and twilight threshold by control dial.

Sen s Syst ors em

Installation advantages Clearly designed terminal compartment for fast, easy wiring. Can be mounted to walls and ceilings. Tilts and turns.

ceiling

EAN 4007841. Dimensions (HxWxD) Output black 602512 white 602611 EAN 4007841. Dimensions (HxWxD) Output
white 600310 black 600419
100 x 120 x 120 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e.g. fluorescent lamp), electronic ballasts, capacitive, e.g. low-energy lamp, 6 each max., C 132 F V/50 Hz 360 with 180 angle of aperture 10 precision adjustment of lens 12 m max. (temperature-stabilised) lux 10 sec. 15 min. IP 54 II
50 x 80 x 120 mm 500 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5) electronic ballasts, capacitive, e.g. low-energy lamp, 4 each max., C 88 F V/50 Hz m max. lux 8 sec. 35 min. IP 54 II
Voltage Detection angle Reach Twilight setting Time setting IP rating Safety class
12 m max. 12 m max. 120 2m 10 m max.

360 / 3 sensors

Coverage angle

Coverage angle reduction

Angle of coverage Perfect detection 120

180 vertically

30 horizontally Reducing the angle of coverage
Motion Detectors for Outdoors IS LED
Infrared Sensor with LED Light
The world has never seen anything like this before. The IS LED combines timeless, aesthetic design with practical benefits. Just like any other motion detector, for instance, it switches an external light 'ON' and 'OFF' again. At the same time, though, the IS LED is also a house number illuminated by LEDs. This unique, practical and stylish combination can be used for all sorts of applications. This is how they work Three LED function programmes geared to practical needs: 1. 'ON' at twilight threshold, all night 2. 'ON' at twilight threshold to the middle of the night. 3. 'ON' when movement is detected When movement is detected, the light connected switches 'ON' and 'OFF' again independently of the programme. Manual override (4h) can be selected at a mains power switch connected to the light. Setting options Detection zone of motion detector can be limited using the shrouds provided. Easy, convenient selection of light 'ON' time, twilight threshold and programmes on removable sensor module.
Low energy consumption and long life

IS LED

EAN 4007841. Dimensions (HxWxD) Output silver x 155 x 65 mm 1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos = 0.5, e.g. fluorescent lamp) electronic ballasts, capacitive, e.g. low-energy lamp, 6 each max., C 132 F approx. 1 W V/50 Hz 360 with sneak-by guard 8 m all round (mounted at a height of 1.m) lux 5 sec. 15 min. selectable IP 54 II
LED output Voltage Detection angle Reach Twilight setting Time setting Manual override IP rating Safety class
Main features at a glance Installation advantages Comes complete with self-adhesive numbers for use as a house number light.
Switched-on lighting technology Photoelectric lighting controllers switch 'ON' light in relation to ambient brightness. An integrated light sensor automatically switches the connected light 'ON' at dusk and 'OFF' again at dawn. This makes them the ideal solution for any lighting system: Photosensor switches light 'ON' and 'OFF' in relation to ambient brightness. Lights of any type are switched 'ON' and 'OFF' automatically. Can also be used for controlling commercial lighting systems or shop window illuminations. Also available as low-energy lamp with integrated photoelectric lighting controller. Ideal for permanently illuminated house numbers.

Day = 'OFF'

Night = 'ON'
chosen night-time setting = 'OFF' (Vario night economy mode)
Low-energy Lamp with integrated Photoelectric Lighting Controller

NightMatic

Ideal for controlling lighting systems used for illuminating building fronts, premises, shop windows or other areas.

NightMatic 3000 Vario

NightMatic 2000
This is how they work The NightMatic 2000 registers ambient brightness, automatically switching 'ON' connected lights when the twilight threshold is reached at dusk and 'OFF' again at daybreak. The microprocessor controlled NightMatic 3000 Vario even goes a step further. With its Vario night economy mode, it also helps to save electricity. If you wish, it will automatically switch a light 'OFF' during the night after a programmable period of time and then back 'ON' again in the morning at about 5 a.m. if it's still dark.
IMPACT-RESISTANT MATERIAL
The LN 1 combines exceptional design with a high level of functionality. An extremely slimline profile makes it a real looker wherever it's installed. Needless to say, the 11 W low-energy lamp is included and provides perfect illumination in the evening when light levels fall to the twilight setting selected. The light then switches 'OFF' again automatically at dawn. Setting options Easy adjustment of twilight threshold by control dial.

Setting options Chosen response threshold is easy to set. Easy to replace with E 27 base.
EAN 4007841. Dimensions (HxWxD) Voltage Twilight setting Lampholder Frequency Number of photosensors
(Light dependent resistor)
11 W white x 58 x 58 mm V lux E 27 50/60 Hz 1 photos. with 3 photometric measurem. fields 15,000 hrs. on average 600 IP 30 II
15 W white x 58 x 58 mm V lux E 27 50/60 Hz 1 photos. with 3 photometric measurem. fields 15,000 hrs. on average 900 IP 30 II
18 W white x 58 x 58 mm V lux E 27 50/60 Hz 1 photos. with 3 photometric measurem. fields 15,000 hrs. on average 1100 IP 30 II
Long life Lumens IP rating Safety class

MATIC AUTO ightN

SensorLights for Outdoors
Light comes 'ON' automatically STEINEL SensorLights provide the easiest way of bringing contemporary lighting to your home and garden. Cuttingedge sensor technology automatically switches light 'ON' at dusk as soon as a moving heat source is detected. When it stops detecting movement, it switches the light 'OFF' again after a programmed time. And the best part about it: they are as easy to install as a conventional light. STEINEL SensorLights are available in many different shapes and designs. As wall, ceiling or free-standing lights. From classic to modern, in stainless steel or aluminium or purely as function lights. Security, convenience and energy saving because light comes 'ON' automatically. 36-month functional guarantee. Glass shade availability guaranteed for 5 years.

Aluminium Quality

High-quality aluminium enclosure for long life All Steinel lights are suitable for use with low-energy lamps.
Special dirt-repellent coating for maximum cleaning convenience Forward-pointing, no-maintenance LED technology for maximum energy efficiency

GENUINE

hand blown

Y S TA L G L A S S

Sensor Wall Lights with an LED Light Corona and Power LED Effect Light
Energy-saving and LED technology in top-quality design
These high-quality lights bring together the very latest technologies in energy-efficient lighting in a highly attractive enclosure. The STEINEL processor-controlled mini-sensor automatically switches light 'ON' and 'OFF' in relation to whether or not a person is present. The control system has also been optimised specifically for the use of low-energy lamps. An LED light corona in the base of the unit adds an attractive lighting feature. The L 265 S also features a 1-W power LED that shines on the wall below the light when it's dark. This attractive light effect can also illuminate the house number, family name or other information displayed there. These designer-style lights come with a highquality die-cast aluminium enclosure finished in a dirt-repellent NANO Clean coating.

XLed Home 1

14.8 W LED 90% energy saving Active Thermo-Control
EAN 4007841. Dimensions (HxWxD) Output white 002695 silver 002688
210 x 175 x 180 mm 170 LEDs, approx. 14.8 W Lifespan of LEDs: up to 50.000 hrs. 6700 Kelvin V/50 Hz 180 horizontally, 120 vertically 140 with sneak-by guard 180 horizontally, 90 vertically 14 m max. (temperature-stabilised) lux 8 sec. 35 min. IP 44 I
Light colour Voltage Floodlight posit. range Detection angle Sensor positioning range Detection reach Twilight setting Time setting IP rating Safety class

XLed Home 1 14,8 W

Halogen 150 W
Sensor-Switched Halogen Floodlights
STEINEL sensor-switched halogen floodlights are the ideal solution when it comes to illuminating the front of buildings, driveways and vulnerable spots with particularly bright light. These vigilant floodlights are designed for bulbs with output ratings of 150 to 500 watts. This automatically picks out special features, welcomes guests and frightens off unwanted visitors. Ranging from the low-price Fresnel lens light HS 5140 to the microprocessor controlled hi-tech floodlight HS 500, the STEINEL line-up offers just the right model for any application. Models HS 150 and HS 300 are equipped with a ceramic reflector. Setting options The detection zone can be adjusted exactly to requirements at the site of installation by means of the tilting, swivelling multi-lens (HS 150 DUO, HS 300 DUO, HS 500 DUO) or Fresnel lens (HS 5140) and can be limited using the shrouds provided. Easy adjustment of light 'ON' duration and twilight threshold by control dial.
HS 150/300/500 The halogen floodlight housing can be tilted from +110 to -40 and swivelled through 40. This permits optimum illumination even in situations where installation is awkward.

HS 150 DUO

HS 300 DUO

HS 500 DUO

HS 5140

CERAMIC

REFLECTOR
Attractive design High-quality, powerful ceramic reflector

RS 16-3 L

High-quality finish White. hand-blown Triopal glass shade Base in high-quality die-cast aluminium or high-quality plastic (RS 16/16-2/16-3 L)
EAN 4007841. Dimensions (HxWxD) Output white mm dia. x 110 mm 75 W max. / E 27 + 800 W max. / e.g. bathr./WC extr. fan approx. 1 mW 5.8 GHz IP 44 / II Aluminium
white mm dia. x 125 mm 100 W max. / E 27 + 800 W max. / e.g. bathr./WC extr. fan approx. 1 mW 5.8 GHz IP 44 / II Aluminium
white mm dia. x 95 mm 60 W max./ E 27 EAN 4007841. Dimensions (HxWxD) Output

white x 270 x 110 mm

white 738310

st.-steel effect 738419

295 x 295 x 110 mm
60 W max. / E 27 max. additional switching capacity 100 W / e.g. bathroom/WC extractor fan approx. 1 mW 5.8 GHz IP 44 / II Plastic
Transmitter power HF-system IP rating / Safety class Base
approx. 1 mW 5.8 GHz IP 44 / II Plastic
Main features of SensorLights
RS 10-1 / 100 / 16 / 16-2 / 16-3 L
Voltage Angle of coverage Reach Twilight setting Time setting 230-240 V/50 Hz 360 with 160 aperture angle
also through glass, wood and stud walls
m dia., infinitely variable m dia. (RS 16/16-2/16-3 L) lux 5 sec. 15 min.
Easily mounted to Twilight setting walls or ceilings

Reach setting

RS 13 L / RS 10-3 L
Stylish looks in a wide diameter, ideal for corridors, hallways or stairwells. These lights cut a great figure wherever they are installed whether on the ceiling or on the wall. The hand-blown opal glass shades are surrounded with trim panels in matt-finished crystal glass or coloured plastic. Maximum bulb output is 75 watts. Operation, setting options and installation advantages see p. 82
Exquisite design, ideal for rooms in living areas. Anyone with a preference for exceptional design is sure to find the right hi-tech SensorLight for their home in this series. Three visible clips not only hold the white glass shades securely in place, they also add to the overall design.
Operation, setting options and installation advantages see p. 82

RS 13 L

RS 13 / 10-3 / 21 L
Voltage Netzanschluss Angle of coverage Erfassungswinkel V, 50 Hz V/50 Hz 360 mit 160 ffnungswinkel with 160 aperture angle
also through glass, wood Leichtbauwnde ggf. durch Glas, Holz und and stud walls
EAN 4007841. Dimensions Abmessungen (HxWxD) (H x B x T) Output Leistung white mm dia. x x 110 mm mm 75 W max. max. 75 W / E 27 + max. 800 W / 800 W max. e.g. Bad-/WC-Lfter z.B. bathr./WC extractor fan 5.8 5,8 GHz IP 44 II Aluminium
st.-steel effect white 360 mm dia. x x 110 mm mm 75 W max. max. 75 W / E 27 + max. 800 W / z.B. bathroom/WC extractor fan 800 W max. e.g. Bad-/WC-Lfter approx. 1 ca. 1 mW mW 5.8 5,8 GHz IP 44 II Aluminium
silver, opal matt glass shade mm dia. x x 100 mm mm 75 W max. max. 75 W / E 27 + max. 800 W / 800 W max. e.g. Bad-/WC-Lfter z.B. bathr./WC extractor fan approx. 1 ca. 1 mW mW 5.8 5,8 GHz IP 20 II Aluminium

L 15 ws

DL 750

HS 150 pl

L 190 ws L1 ws

L 560 ws
Monitor showing film on functions and possible applications
Working display samples to touch
Images showing environments lights can be used in
Shelves displaying the ideal range of products to boost your turnover and earnings.
We will be pleased to team up with you and create display shelves tailored to your specifications.
Brand presentation with monitor and boxed products on shelves
Infrarot-Sensoren fr den Auenbereich Additional Displays
Boost your sales Take advantage of the many additional displays
Countertop display: 62.5 x 51 x 36 cm (w x h x d)
Sensor column: 100 x 14 x 11 cm (w x h x d)
1/1 euro-pallet: 118 x 107 cm (w x h)
Space-optimising wire grid display: 15.3 x 100 cm (w x h) 1/1 euro-pallet: 78 x 107 cm (w x h) Free-standing display: 166 x 51 x 38 cm (w x h x d)
IP Ratings and Protection Classes
IP protection rating The IP code classifies the level of protection provided by enclosures and covers used for protecting electrical equipment. The IP code is defined under IEC 529, EN 60529, DIN VDE 0470-1 and NF C 20-010. The protection ratings are defined by the letters IP (International Protection) followed by two digits. This means that the full protection rating consists of the two letters and the digits indicating the level of protection. 1st digit Protection of equipment against the ingress of solid, foreign objects and also protection of persons against contact with hazardous parts. 2nd digit Protection of equipment against the harmful ingress of water. Where there is no protection rating - with regard to one of the criteria - the digit is replaced with the letter X, e.g. IP X4 or IP 6X.
IK protection code as defined in EN The degree of protection provided by enclosures for electrical equipment against external mechanical impacts is defined by the IK code under standard EN 50102 - VDE 0470 Part 100 and EN 62262.
IK 0X IK = Code letters (international mechanical protection) 0X = IK class of impact protection (from 00 to 10)

1st digit

Protection against ingress of foreign objects
Equipment provides no protection against ingress of solid, foreign objects. Protection against ingress of solid, foreign objects in a diameter > 50 mm. Protection against ingress of solid, foreign objects in a diameter > 12.5 mm. Protection against ingress of solid, foreign objects in a diameter > 2.5 mm. Protection against ingress of solid, foreign objects in a diameter > 1 mm.

VDE-GS label For technical work equipment and ready-to-use items of daily use within the meaning of the GPSG (optionally instead of VDE label for these products) If products are technical work equipment or ready-to-use items of daily use within the meaning of the German Act on Equipment and Product Safety, you can also use the VDE-GS label. VDE-EMC label For equipment conforming to the standards on electromagnetic compatibility. The VDE-EMC label expresses a product's conformity with the applicable standards on the electromagnetic compatibility of products. However, this mark also signalises the reliable operation of your product in an electromagnetic environment. As the requirements on issuing the label automatically and unreservedly cover satisfaction of the relevant standards. ENEC label from VDE For products meeting harmonised certification procedures. The European standards specified in the ENEC Agreement provide the basis for testing. Products (these currently being lights, light components, low-energy lamps, IT equipment, transformers, appliance switches, electrical regulators and control devices, terminals, appliance couplers, some types of capacitor and radio interference suppression components) tested on this basis are allowed to carry VDE's ENEC label. Approval from another body involved in the European certification procedure is not necessary.
VDE cable marking VDE cable marking applies to cables, leads and wiring conduits and trunkings. CE label The manufacturer documents and declares in its sole responsibility that the product marked satisfies the basic requirements of EU directives. This label is not a mark of tested safety and quality but is directed towards the authority supervising the market. F label Information showing that lights may be mounted on normally flammable surfaces.