IS 2160

Less is m ore: the IS 2160 ECO The attractively priced IS 2160 ECO is ideal for use in smaller-type properties and at entrances. With this model, w e offer our customers a sound, quality motion detector from European production. It reliably w atches over areas as large as 170 m2. The multi-lens divides its detection zone into 260 sw itching zones and 5 levels. With a reach of up to 12 metres, an angle of coverage of 160 and an angle of aperture of 40, it provides high-quality technical features. At 600 w atts, its overall sw itching capacity is matched to demand. Both light 'ON' time and tw ilight response threshold can be selected to suit individual requirements. Benefi ting from outstanding, high-quality technology, the IS 2160 ECO from STEINEL Professional takes care of smaller-type lighting tasks w ith familiar precision and reliability. Attractively priced infrared w all sensor Watches over entrances, small properties etc. Max. reach: 12 m Angle of coverage: 160 Angle of aperture: 40
IS 2160 EAN black EAN w hite Dimensions (h x w x d) Output 113 x 78 x 73 mm - 600 W max. (resistive load, e.g. fi lament bulb), - 500 W max. (uncorrected, inductive, cos = 0.5, e.g. fl uorescent lamps) - 500 W max. (series corrected) - 500 W max. (parallel corrected, w ith C 45.6 F) - 500 W max. (electronic ballasts, capacitive, e.g. low -energy lamps, max. of 6 each. C 132 F) 230 240V / 50 Hz m max. 40 horizontally, 70 vertically 5 detection levels, 260 sw itching zones 8 sec. - 35 min. 2 - 2000 lux IP 54 II -20 to +50 C Subject to technical modifications. Detection zone Max. reach: 12 m tangentially Angle of coverage: 160 Angle of aperture: 40
Voltage Angle of coverage Reach Turning range Sensor system Time setting Tw ilight setting Manual override Enclosure Protection class Ambient temperature
Shroud foils: limit the angle of coverage to suit requirements
Setting capabilities Detection zone: exact adjustment by tilting and turning
Pammvi Group Of Companies
C-501, Remi Bizcourt, 9, Shah Ind Estate, Veera Desai Road, Andheri (w), Mumbai-400053. Tel No: 022-26731904 / 26731052 Ext # 35 Fax: 022-26731901 Email: info@pammvi.com, enquiry@pammvi.com http://www.pammvi.com http://www.occupancysensor-motionsensorlights.com/

Motion Detectors The Reference Class

sensIQ

Prized for exceptional excellence: the innovative sensIQ.
sensIQ stainless steel look Anyone who thinks that motion detectors can't get any more innovative doesn't know sensor specialists STEINEL and their high-end sensIQ motion detector. This newly developed infrared motion detector comes with a whole host of advantages for consumers and professional electricians. Its main highlight: the detection reach settings can be selected easily, precisely and quickly on the unit itself. Painstakingly striding out distances, shrouding the lens or frequently having to press down the sensor head to adjust reach are now a thing of the past. Let us welcome the first sensor for all coverage angles and requirements from 200 to 300 with unique sensIQ technology.
In possession of the internationally coveted 2006 IF Design Award, sensIQ is proof of just how well functionality and design can harmonise together. As a result, the sensIQ from STEINEL presents itself in top form in every respect. To our mind, there's hardly a better reference.
Form, function, finesse the sensIQ simply has it all
The sensIQ will bring a beam to the faces of electricians and consumers alike. Intelligent functions and a remote control make the STEINEL "Reference Class" extremely convenient to use. Advantages for electricians: Metre-precise reach setting on the unit easy, fast, accurate Fast installation Large terminal compartment One sensor for all detection needs from 200 to 300, as well as wall or ceiling mounting. A designer-style wall mount is used for mounting on external corners Time and twilight setting are adjusted by control dial Installation advantage from optional modules: Wireless interconnection or floating. Advantages for consumers: First-class detection properties, all precisely tailored to individual needs Bringing a smart look to buildings with awardwinning design Current light level can be set as the twilight threshold by remote control Practical functions: Manual override, permanent light 'OFF' and the holiday function for deterring intruders Soft start module with basic brightness for aesthetic lighting and longer bulb life Top quality for long-lasting service Outstanding value for money

Trims with swivel mechanism can also be used
Straightforward installation: Preinstall power supply unit with trim and plug in sensor electronics later on
Any trim can be used Fitting dimensions: Outer dia. = 73 mm Fitting depth = 53 mm
Motion Detectors the Professional Series
Intelligent, New and Thoroughly Modular The STEINEL professional range offers the right sensor for every situation: Wall sensors for indoors and outdoors 360 ceiling sensors Corridor sensors Photoelectric lighting controllers Consistently tailored to professional needs, STEINEL's newly developed sensor range sets standards when it comes to versatility, reliability and ease of installation. Thanks to the new modular design, these sensors are easier and faster to install than conventional models: pre-install the standardised power supply unit and fit the chosen sensor module later on that's all there is to it! This avoids the need to grapple with awkward tools and prevents damage to sensors or 'disappearing acts' in the run-up to acceptance inspection.
Power supply unit Sensor electronics All of the benefits at a glance: Modular design Large detection zone with a reach of up to 20 m Fast, exact reach adjustment by moving the multi-lens Detection zone can be limited using the shrouds provided. For the first time, the shrouds are positioned below the lens as protection from the weather and unintentional adjustment. High number of switching zones for reliable coverage Function buttons permit convenient and accurate time and twilight setting 2000 W max. (resistive load) Pulse function (e.g. to activate staircase lighting timers) Floating version available on request Large terminal compartment with plug-in terminals for fast, straightforward wiring Shroud for limiting detection zone
Multi-lens Decorative trim panel

IS 3180 INOX-Look

IS 3180 Wall sensor
Installation advantage: Large terminal compartment with plug-in terminals makes the power supply unit easy to wire Straightforward installation: pre-install power supply unit and plug in chosen sensor electronics IS 3180 white IS 3180 black
Far-sighted intelligence The high-performance IS 3180 wall sensor features two highly sensitive, dual element type pyro sensors positioned at an angle of 68 to each other. With 448 switching zones on 7 detection levels, they permit reliable, unrestricted coverage of areas as large as 500 m2. Equipped with an impressive set of electronics, this sensor is designed for professional use. It has a switching capacity of 2000 watts. Sensors connected in parallel are automatically identified and their brightness detection capability automatically deactivated (e.g. in stairwells). Detection zone The IS 3180 reliably responds to movements within a range of up to 20 metres. It has a 180 detection angle with a 90angle of aperture.

The IS 345 saves energy by switching light on only when it's needed, providing added convenience and safety. Equipped with two highly sensitive infrared detectors in dual-element design as well as a multi-lens with 280 switching zones on 5 detection levels, it reliably keeps watch over corridors and passageways of up to 20 m in length. The IS 345 guarantees perfect detection of anyone walking in a radial direction at a distance of 6 m from the sensor. The detection zone for the tangential walking direction measures 20 x 4 m (mounted at a height of 3 m).
Detection zone of IS 345, mounted at a height of 2.6 m (blue = tangential walking direction, red = radial walking direction)
Photoelectric Lighting Controller the Professional Series
HF 3360 Ceiling and wall sensor
Professional sensor in innovative high-frequency design for perfect surveillance of indoor areas
The HF 3360 is a motion detector that works on the basis of cutting-edge HFsensor technology. It emits a 5.8 GHz signal and responds to changes in the echo pattern caused by even the smallest movement of persons or objects (e.g. at a distance of 3 m). The HF 3360 responds more or less instantly to any movement in the detection zone, regardless of temperature and walking direction. This makes it the ideal choice for use in stairwells or other indoor spaces. Bristling with electronics, it is designed for professional use. It has a switching capacity of 2000 watts. Sensors connected in parallel are identified automatically. At a reach of up to 8 m all round, it has a 360 detection zone with an aperture angle of no less than 140. This makes it possible to watch over large indoor spaces reliably and without the need for major installation work.
NightMatic 5000-2 Photoelectric lighting controller
Ideal for outdoor property lights, shop windows and illuminated advertising signs
The microprocessor-driven NightMatic 5000-2 photoelectric lighting controller switches light 'ON' and 'OFF' in relation to the level of ambient light, making it the ideal solution when it comes to illuminating shop windows or specific areas through the night. New - the adjustable night economy mode and selection capability: Light 'ON' or 'OFF' in the morning It has a switching capacity of 2000 watts.

Voltage Detection zone Recommended installation height Max. reach

12 m 10 m 8m 6m 4m 2m

Distance from sensor 12 m m m m m m m m m
Minimum movement 103 cm cm cm cm cm cm cm cm cm
Sensor system Switching threshold or constant light level
Switch-off delay Enclosure type Protection class Amb. temp. Control signal Reach
4 min. 30 min., pulsed mode (approx. 2 s), sustained mode (approx. 2 h) IP 20 II -15 C to 50 C BLS D / DF; V (50 electronic ballasts max.) 4 m (IR remote control)
tangential walking direction (m) radial walking direction (m)
LuxMaster BLS /D/DF detection zone, mounted at a height of 2.5 m

RELUX Planning Software

STEINEL and RELUX Planning motion and occupancy detectors has never been more reliable
IS 300 left: floor plan; right: planning example with BLS
tangentially radially presence

Floor plan

For the first time, "RELUX Professional" light planning software also makes it possible to plan motion and occupancy detectors with reliability and precision. RELUX Informatik AG decided to choose sensor specialists STEINEL as their partner for this major development step. Electrical planners now have a software-aided tool for integrating motion detectors in complex lighting applications. Demand-based lighting management using motion and occupancy detectors is gaining importance in modern operational / working areas and offices. To date, the planning tools available for the professional integration of these systems in complex lighting concepts have been far from adequate. As far as motion detectors were concerned, the "assistance" given to electrical planners was limited to just a few physical parameters, such as the reach of the sensor and the angle of coverage. This information does not provide the basis for planning motion detection in the professional sense as we understand it today.
RELUX Professional now includes all STEINEL motion detectors, occupancy detectors and sensor-controlled lights with exact detection characteristics. This means it is possible to display and plan the exact zones for optimum detection of radial and tangential movement in any room situation. As far as the user is concerned, incorporating motion detectors changes nothing to the way the software is handled; in terms of positioning light and motion detectors, the familiar process stays the same. RELUX Professional software can be downloaded free of charge from www.relux.ch. The package includes all details on products from STEINEL as well as 50 other international manufacturers of lighting equipment. Further information on the software-aided planning of motion detector installations is available from STEINEL (info@steinel.de) or RELUX (info@relux.ch).

tangentially

radially
Planning example with IS 300
"Signal" (with LED's)
"Control" (with switching output)
CO2-AirCheck Air Quality Sensor
Fresh room air Everyone needs air to breathe. Stale air not only makes you tired, it slows down productivity and leads to poorer working performance. Often, windows are not opened as regularly as they should be, particularly when it comes to airing conference rooms, meeting rooms, offices and classrooms. This is because people find it difficult to sense the need to let fresh air in. STEINEL offers the CO2-AirCheck for monitoring and ensuring a constant high quality of room air. It automatically measures and evaluates the concentration of carbon dioxide (CO2) in room air as this gas is produced and exhaled by everyone as part of the metabolic process. It is the ideal indicator for room-air quality.
Air-change rate required by persons in rooms Luftwechselbedarf des Menschen in geschlossenen Rumen

AirCheck

Max. conMax. konstanter stant total Gesamtair change luftwechsel rate
BedarfsRequired luftwechsel air-change rate
All of the benefits at a glance: Automatic analysis of the CO2 content in room air with the "Signal" option for manual ventilation A switching pulse can be sent indirectly to a control system or building services automation facility ("Control") Direct "OPEN" / "CLOSE" control by actuators ("Control"), e.g. windows or ventilation system Exact measurement by a thermopile sensor with a measuring channel and a reference channel Signal smoothing and error correction to compensate for sudden fluctuations Measurement cell service life > 15 years without re-calibration
LuftAirwechsel change rate MindestMinimum luftwechsel air-change rate

8:a.m.

10:a.m

12:noon

14:p.m.

16:p.m.

18:00 Uhr 6 p.m.
CO2-AirCheck Air quality sensor

CO2-AirCheck

Possible settings

ppm 600

1500 2000
Control for setting the threshold (from 600 ppm 2000 ppm CO2) at which a fan or other actuator is to switch 'ON'
Ideal for measuring the quality of air in offices, hotels, conference centres, schools and residential buildings

Tailoring the ventilation of rooms used by people is becoming an important exercise for planners and users. The STEINEL CO2-Aircheck air-quality sensor provides help in 2 available versions. In the "Signal" option, air quality is indicated by traffic-light logic. This is ideal in classrooms, conference rooms etc. The ability to concentrate is significantly improved. The "Control" version goes a step further. With this version, STEINEL is permitting a new standard in automating building services: Invisibly integrated drives open windows fully automatically. Any other ventilation system can also be controlled. Automation and control using sensors is essential for efficient, tailored natural ventilation. The benefits are clear to see: The need for ventilation changes during the course of the day Human beings do not properly sense the need for ventilation Regulating room ventilation as and when needed can create a pleasant room climate and save a large amount of energy.
Prod. No. Dimensions (h / w / d) CO2 measurement range 3-LED threshold indicator

Signal 121013

120 x 120 x 53 mm 300 ppm 2000 ppm Green = everything OK

Control 121112

Yellow ppm = ventilation recommended Red > 1500 ppm = time to let fresh air in (acoustic signal) Temperature (function) Measurement cell life Power consumption Operating voltage Switching output - Volt-free switching output Switching voltage resistive/inductive - Analog output (5 mA max.) + 5 C to + 40 C > 15 years approx. 2.5 W V/50 Hz 0 C to 40 C
for connecting an actuator directly 49 V ac max. 4A/2A V (ppm CO2), Normal case V (ppm)
STEINEL's CO2-AirCheck features infrared optical two-beam gas detectors that work on the absorption principle and measure the concentration of CO2 in room air. The measuring element used is a dual thermopile sensor with a measuring channel and reference channel. As the reference channel compensates for any measurement corruption caused by measurement system soiling, ageing or changes in ambient temperature, the unit continues to work for prolonged periods time without the need for action on the part of the user.
EMC Enclosure type Protection class
Interference immunity to EN 50082 Part 1 Emitted interference to EN 61326 IP 20 II
Example application for the automatic system: window opener
Attractive professional-quality sensor-controlled lighting with fascinating details.
These days, outdoor lights with integrated sensor technology are part and parcel of contemporary lighting planning. In view of rising energy prices, the long-term benefit of sensor lights cannot be rated highly enough. Switching light 'ON' automatically when it's needed, and 'OFF' again when it's not, ensures maximum energy savings. Not to mention the added safety and greater convenience to the user. SensorLights from STEINEL can be installed just as quickly as conventional lights and are available in a wide selection of attractive shapes and design options. The mini-sensor, STEINEL's latest innovation, for the first time makes it possible to produce sensor lights with an IR system that's hardly visible while also improving detection quality and operating convenience.

All of the benefits at a glance: Safety, convenience and energy saving because light comes 'ON' automatically STEINEL multi-lens technology for all-round detection without blind spots Brightness control for permanent 'light ON' in energy-saving dimmed mode High number of switching zones for reliable coverage Light threshold and 'ON' time adjustable to suit needs Fast installation Attractive design Hand-blow glass shades

L 266 cube

L 267 cube
As if from the same mould: Superb quality of design, technology and materials.
The most stunning new development from the STEINEL forge: sharp-edged, angular, as if they were hewn from a single block of aluminium. And all with downward radiating power LED effect light and 2-way halogen adapter. Needless to say, this impressive design is packed with every technical refinement sensor specialists STEINEL have to offer. In order to achieve a long and evenly illuminated glass shade, these sensor lights are supplied with the innovative G9 modules.
L 266 cube aluminium-anthracite opal matt

1 W Power

Effect

Aluminium Quality

L 266 cube aluminium silver opal matt
L 267 cube aluminium silver partially matt crystal glass shade
L 267 cube aluminium-anthracite partially matt crystal glass shade
Effect light Detection zone Setting capabilities
Light design or functional light, e.g. for lighting up the house number
Time and twilight setting. LED light 'ON' or 'OFF'

Reducing reach

Coverage angle reduction

L 890 pure

Add design highlights to any building
The slimline wall lights with different designer-style trims in glass and metal lend an exquisite touch to any building. With four versions available, combining high-quality surfaces with uncompromising STEINEL multi-sensor technology is a sheer pleasure. This is how it works: Integrated soft light start. Basic brightness can be adjusted from 0 50% (Watt-o-matic). When movement is detected, the light switches to full power for the time selected. Manual override (4 hrs.) via mains switch. Settings: Basic reach can be set to a maximum of 12 m or 5 m by turning the multi-lens. Detection zone can be limited by fitting the shrouds supplied Comfort function buttons for accurately setting light 'ON' duration, twilight threshold as well as for controlling brightness. L 890 pure aluminium silver

L 321 wave aluminium-anthracite Domed horizontally
The sensor can be plugged in any way round. This means the light can be used horizontally or vertically. The lamp is illuminated by LEDs which effectively light up the house number from behind.

Programme setting

Sensor
Cutting-edge microprocessor control provides functions that leave you wanting for nothing: The integrated soft light start feature creates an elegant lighting effect and prolongs the life of the bulb by gently taking it to full output over a period of one second when it is switched 'ON'. The electronics are equally as gentle on the light when it is switched 'OFF'. Manual override (4h) by operating a mains switch connected in the power circuit.
High-performance mini-sensor
Easy to operate: the sensor module can be completely removed, adjusted at your leisure and then
re-fitted. While doing so, the light is switched 'ON' automatically
LED 'ON' all night after ambient light levels fall to twilight threshold
LED 'ON' up to the middle of the night after ambient light levels fall to the twilight threshold
LED 'ON' when movement is detected

L 307 S aluminium effect

L 308 S black
First-class technology in forward-pointing design
L 307 S L 308 S DesignSelection
The L 307 S and L 308 S lights combine modern, fascinating design with new, groundbreaking sensor technology. In terms of looks, it's not the sensor that stands out, but the design of the light itself. This is made possible by a new, miniaturised sensor unit with superb, innovative technical features.
Boasting a 4-segment sensor system and precision mirror optics for a long focal length, the sensor provides even, highresolution 360 all-round coverage in a radius of 8 m - unprecedented in this class of sensor. This leaves no important area of a property unprotected: neither the garage, the front entrance, nor the garden
path. The operating concept has also been completely redesigned. To permit rapid, intuitive adjustability of the sensor electronics to individual user needs, the entire sensor module can be taken out of the light, set in your own time, put back again and made theft-proof. No separate operating instructions are necessary.
The user is also provided with a number of practical technical features: light soft start / soft end, 25% basic brightness, also only up to midnight depending on setting, and the option, which many customer want, of using low-energy bulbs. Adjusting the settings at dusk or when it's dark is not a problem either because

RS 106 L RS 105 L

RS 104 L RS 105 L RS 106 L
Slim-line elegance for ceilings and walls
Form follows function or function determines design. Particularly in spaces such as stairwells or corridors, lights often need to provide efficient illumination over as large an area as possible and yet take up very little space at the same time, i.e. hug the surface they are fitted to. The RS 104/105/106 L-series from STEINEL uses modern G9 halogen lamps that not only require less space than conventional light bulbs but also deliver a pleasant light. This way, it has been possible to keep the design of these elegant lights extremely slim. The state-of-the-art HF-sensor system is invisibly concealed inside the light. The three models in the series each come with a different hand-blow glass shade.
360 angle of Detection zones coverage. for ceiling mounting. Reach can be infinitely varied from 1 to 8 m all round.
Detection zones for wall mounting.
Light can be adjusted to stay 'ON' for any time between 5 seconds and 15 minutes
Response threshold can be set from 2 to 2000 lux to suit individual needs.
RS 107 L RS 108 L RS 109 L
Hi-tech internal components surrounded by stylish designer-quality glass shades
Adding a mark of distinction to stairwells and corridors, the new glass shades and trims also come together to produce units of outstanding aesthetic appeal. The exquisite surfaces of the hand-blown glass shades conceal cutting-edge HF-sensor technology that controls the light exactly as required. All of the benefits at a glance: Safety, convenience and energy saving; because light comes 'ON' automatically Extremely short response time Reliable all-round detection regardless of ambient temperature and direction of movement Reach, twilight threshold and light 'ON' duration can be set to suit individual needs Fast installation: Sensor and light = 1 connection

RS 110 L

RS 110 L a classic light design re-interpreted
Modern, but not trendy. This is how to describe the linear offset circular form for a new aesthetic look in wall lighting. Details may have changed, its superb finish hasn't.

RS 107 L

RS 108 L with glass trim
RS 109 L with "floating" metal trim
360 angle of coverage. Reach can be infinitely varied from 1 to 8 m all round.
Detection zones for ceiling mounting.
Light can be adjusted to stay 'ON' for any time between 5 seconds and 15 minutes.

RS 10-6 L

RS 10-9 L RS 10-11 L

RS 10-9 L

RS 10-11 L
Brilliant performance in stainless steel and glass
Modern, prestigious architecture primarily uses two materials on building exteriors: stainless steel and glass. They stand for solidity, but also for transparency and creative versatility. In modern light design, stainless steel has become indispensable as a material too. Stainless steel also frames these exquisite SensorLights. There are three attractive stainless-steel trim panels to choose from. All lights feature elegantly curved shades, hand-blown from Triopal glass.

RS 10-4 L / RS 10-5 L / RS 14 L / RS 15 L
Timelessly elegant The RS 10-4 L light is of practical, clearcut design. The hand-blown glass shade is set in a plastic surround available in white or stainless-steel lacquer finish.

stainless steel effect

Glass on glass The RS 10-5 L is a real stunner. The clean lines of its square shade in satinised glass is sure to turn heads in any home.
Robustly practical The RS 14 L light is designed for use in rugged environments. Its impactresistant plastic cover protects it from deliberate or inadvertent damage. This light is available as RS 10 L with handblow Triopal glass shade.
RS 15 L Economy The attractively priced Economy model with all the benefits of cutting-edge sensor technology from STEINEL
RS 10-4 L stainless steel effect
BRS 65 L opal glass shade / white (plastic) cap
BRS 60 L opal glass shade / white (plastic) cap
BRS 66 L opal glass shade / chrome cap
BRS 61 L opal glass shade / chrome cap
BRS 67 L opal glass shade / stainless steel cap
BRS 62 L opal glass shade / stainless steel cap
BRS 68 L opal glass shade / satinised glass trim
BRS 63 L opal glass shade / satinised glass trim

BRS -Series

Exquisite wall and mirror lights ideal for bathrooms, corridors or halls
The new SensorLights from the BRS-series are a highlight in contemporary bathrooms as well as on corridors, on stairs or in hallways. Their clarity of design, first-class materials and state-of-the-art technology are nothing short of breathtaking.
BRS 70 L impact-resistant plastic
Design versatility for countless applications
The lights from the BRS-series come with the convenience of innovative HF-technology that's completely invisible from the outside and responds to any movement in a 360 radius with hardly any delay. They are fitted with G9 halogen bulbs which not only have a long life but also deliver an even, pleasantly warm light. 10 design and material options provide the right hi-tech light solution for every taste and lighting situation.
BRS 64 L opal glass shade / chrome cap
360 angle of coverage. Reach can be infinitely varied from 0.5 to 5 m all round.
The SensorLights from the BRS-series come with an IP 44 rating making them suitable for use in rooms exposed to moisture
RS 104 L / RS 105 L / RS 106 L
Slim-line sensor lights for walls and ceilings
Slim-line design G9 halogen lamp Matt-finish opal glass shade
RS 10 L / RS 14 L / RS 15 L
SensorLights for walls and ceilings
RS 10 L matt-finish opal glass shade RS 14 L in impact-resistant plastic RS 15 L Economy
RS 107 L / RS 108 L / RS 109 L / RS 110 L
Exquisitely designed SensorLights for walls and ceilings
Aesthetically pleasing glass shade and trim options G9 halogen lamp Matt-finish opal glass shade
RS 10 L RS 14 L impact-resistant RS 15 L

2 x 13 W

LED module (optional)
25 LEDs with individually adjustable twilight setting Mains-operated or when battery-powered mains-independent orientation light
Basic light without modules
with orientation light module
with orientation light module (with battery)
HF-sensor 360, reach adjustable from m dia. Precise adjustment of light 'ON' duration and twilight threshold
Wired interconnectability (10x RS PRO 500 max.) Direction of communication from sensor to sensor or to slave
Light distribution curves for RS PRO 500

90 0.4 0.8

RS PRO 500 sensor 2 x 13 W with 1 electronic ballast
RS PRO 500 slave 2 x 13 W with 1 electronic ballast
Orientation light module with 25 LEDs (optional)
Orientation light module with rechargeable battery 25 LEDs, mains-independent (optional)

cd / 1000lm 30

1.2 1.0 cd / 1000lm 30

LED module

C0 /C180

RS PRO 1000

Wireless module (optional)
RS PRO 1000 lights operate on 2x18W low-energy bulbs and 2 separate electronic ballasts for the two bulbs. A particularly interesting feature is the option of bi-directional networking using wireless modules that plug into the lights. With 32 addresses to choose from, complex network groups can be set up within the building. Wireless transmission is exceedingly safe and fast. Needless to say, networks can also be wired as with the RS PRO 500.
with orientation light + wireless module with orientation light (with battery) + wireless module
32 channels bi-directional up to 100 m in open space Wireless and cable networks can be combined

2 x 18 W

25 LEDs with individually adjustable twilight setting Mains-operated or - when batterypowered - mains-independent orientation light
with orientation light (with battery) + wireless module
with orientation light + wireless module
2 x 18 W / TC-DEL G 24-Q2, not included Two separate electronic ballasts can also be operated with only 1 x 18 W
Wired interconnectability (5x RS PRO 1000 max.) Direction of communication from sensor to sensor or to slave Interconnectability with wireless modules (any number of RS PRO 1000) (max. reach 100 m with direct visual contact)
HF-sensor 360, reach adjustable from 1- 8 m dia. Precise adjustment of light 'ON' duration and twilight threshold
Light distribution curves for RS PRO 1000

C0 /C180 C90 / C270

120 120
RS PRO 1000 sensor 2 x 18 W with 2 electronic ballasts (independent)
RS PRO 1000 slave 2 x 18 W with 2 electronic ballasts (independent)
Module MLED 1 orientation light 25 LEDs (optional)
Module MLED 1A orientation light with rechargeable battery 25 LEDs, mains-independent (optional)
Wireless interconnection module, e.g. for creating individually tailored network groups via 32 addresses in renovation projects (optional)

Installing HF 3360:

IS 3180 / IS 3360 / IS 345
Infrared wall sensor, infrared ceiling sensor, infrared corridor sensor, from the professional series
Installing IS 3180 / IS 3360 / IS 345:
High-frequency ceiling and wall sensor from the professional series

2 - 2000 Lux

5 sec.-15 min

Reset 5 sec.

Power supply unit Sensor attachment Attracting the shrouds under the lens Screwing on the lens Fitting the cover Twilight setting (lux) Time setting (5 sec. 15 min.) Reset button for returning the twilight and time setting to the factory setting of m, 2000 lux and 5 sec.
Power supply unit Sensor attachment Fitting the cover Reach setting ( m) Twilight setting (lux) Time setting (5 sec. 15 min.) Reset button for returning the twilight and time setting to the factory setting of 1m, 2000 lux and 5 sec.
Concealed wiring Surface wiring
Connection to plug-in terminals
Concealed wiring Surface wiring Connection to plug-in terminals
Power supply unit Sensor attachment Fitting the cover Twilight setting (0.lux) 'ON'/'OFF' morning setting Night economy mode setting Surface wiring Connection to plug-in terminals Installing IS 300:

NM 5000-2

Photoelectric lighting controller from the professional series

Installing NM 5000-2:

Infrared wall sensor from the basic series

mounting plate

Mains power supply lead Power supply to

connected load

black blue brown green/yellow

o OFF t VariNigh

ON g OFF rnin Mo
Protective earth conductor Lugs for surface wiring Power supply to IS 300
fastening screw decorative ring
OFF ON Morning Vario OFF Night OFF ON Morning Vario OFF t OFF ON Morning Vario OFF Night

sensor housing

max. 10 mm

sensor lens shroud

0,Lux OFF ON Morning Vario OFF Night

Installing IS 2160:

IS 2160 Economy

Concealed wiring

IS 2180-5 IS 2180-2
Infrared wall sensors from the basic series
Installing IS 2180-5 / IS 2180-2:

Surface wiring

Mains power supply lead Load power supply lead
Typ 6059/6060 230V M max.600W

Made in Germany

500 W 600 W
Locking screw Cover Lens (removes and turns for
selecting basic reach settings of 12 m max. or 5 m, or 20 m or 8 m (IS 2180-5))
Twilight setting lux Time setting 10 sec. 15 min. Clip (housing lifts up for installing
Supply cable, surface wiring with wall mount and connecting to the mains)
Housing cover Terminal, including sensor unit (cylindrical section) Mounting plate Concealed wiring Surface wiring Swivel unit Screws with rounded caps
Installing L 266 cube / L 267 cube:

basic reach setting of 12 m max. or 5 m)
c) Sensor lens aimed back

c) Detection zone C

Twilight setting lux Time setting (5 sec. 15 min.) Housing lifts up for installing and

connecting to the mains

Positioning screw
Mains connection Switching lead for connecting an additional load
SensorLight for outdoors Wall mount Sensor lens (removes and
turns for selecting basic reach setting of 5 m max. or 12 m)
Installing L 875 S / 885 S / L 870 S / 871 S:

Installing HS 2160:

Impact-resistant SensorLight for outdoors
Twilight setting Time setting Brightness control (dimming) Mains power connection Cover Concealed wiring Surface wiring Connection to plug-in terminal
Connection of concealed wiring Connection of concealed wiring with

additional loads

Connection of surface wiring Connection of surface wiring with

Alternatively Alternativ

Time setting (5 sec. 15 min.) Twilight setting (lux)

TORX TORX

Installing RP RO 500 / 1000:
Halogen floodlight for outdoors, can be connected to sensor-switched halogen floodlight with external switching output.
Installing HS-S 150 W Slave:

RS PRO system

SensorLights for indoors

Sensor + LED-Modul

Slave + LED-Modul

150 300

RS Pro 1000 Sensor + Modul MF1

Optional Optional

RS Pro 1000 Slave + Modul MF1

1 min.

1 - 20 min.

1 - 8 m

Twilight setting Time setting Reach setting

20 Lux

e.g. 14 x 100 W bulbs Load, lighting Sensor connection

terminals

RS-Series

Installing RS-series:

Wiring diagrams
Light without neutral conductor
Housing Reach setting: m dia. Time setting: 5 sec. 15 min.

Switch inside building

Twilight setting: lux
HF-sensor Glass shade Spacer for surface wiring
Lamp fitted with a neutral conductor
Parallel connection of several sensors

BRS-Series

Installing BRS-series:

IP 44 IP 20

Housing Reach setting

(0.m all round)

225 cm

Twilight setting

Time setting

(5 sec. 15 min.)

Mains power connection Glass shade Glass shade locking screw Spacer for surface wiring

Two-way switch inside